Nanocarriers for dermal drug delivery: Influence of preparation method, carrier type and rheological properties

Nanocarriers are highly interesting delivery systems for the dermal application of drugs. Based on a eudermic alkylpolyglycosid nanoemulsions, solid lipid nanoparticles (SLN) and nano-structured lipid carriers (NLC) were prepared by ultrasonic dispersion. The ultrasound preparation technique turned out to be convenient and rapid. For reasons of comparison, nanoemulsions were also prepared by high-pressure homogenisation with highly similar physicochemical properties. Cryo electron microscopy was employed to elucidate the microstructure of the ultrasound-engineered nanocarriers. Furthermore, in vitro skin experiments showed excellent skin permeation and penetration properties for flufenamic acid from all formulations. Moreover, ATR-FTIR studies revealed barrier-restorative properties for NLC and SLN. Furthermore, the rheological characteristics of all nanocarriers were determined. In order to increase the viscosity, three different polymers were employed to also prepare semi-solid NLC drug delivery systems. All of them exhibited comparable skin diffusion properties, but may offer improved dermal applicability.     

Skin moisturizing effect and skin penetration of ascorbyl palmitate entrapped in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) incorporated into hydrogel

This study was performed as a complimentary to our previous study regarding the chemical stability of ascorbyl palmitate (AP) in solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and for comparison, in nanoemulsion (NE) incorporated into a hydrogel produced by high pressure homogenization. AP is known as an effective antioxidant that protects tissue integrity similar to vitamin C. Recently, its moisturizing activity in conventional topical formulations was found to be high. The aim of the present study was to investigate the moisturizing potential of AP in SLN and NLC incorporated into hydrogel as colloidal carrier systems. It has been known that SLN and NLC have occlusive effects, but AP incorporation moisturized skin significantly better than placebo in short-term (p < 0.001) and long-term trials (p < 0.01) for both SLN and NLC. In the second part of the study, SLN and NLC were found to sustain the penetration of AP through excised human skin about 1/2 and 2/3 times compared to NE (p < 0.001 and p < 0.01), respectively, due to the solid state of Witepsol E85 in the lipid phase.     

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for application of ascorbyl palmitate

The aim of this study was to improve the chemical stability of ascorbyl palmitate (AP) in a colloidal lipid carrier for its topical use. For this purpose, AP-loaded solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and for comparison, a nanoemulsion (NE) were prepared employing the high pressure homogenization technique and stored at room temperature (RT), 4 degrees C and 40 degrees C. During 3 months, physical stability of these formulations compared to placebo formulations which were prepared by the same production method, was studied including recrystallization behaviour of the lipid with differential scanning calorimetry (DSC), particle size distribution and storage stability with photon correlation spectroscopy (PCS) and laser diffractometry (LD). After evaluating data indicating excellent physical stability, AP-loaded SLN, NLC and NE were incorporated into a hydrogel by the same production method as the next step. Degradation of AP by HPLC and physical stability in the same manner were investigated at the same storage temperatures during 3 months. As a result, AP was found most stable in both the NLC and SLN stored at 4 degrees C (p > 0.05) indicating the importance of storage temperature. Nondegraded AP content in NLC, SLN and NE was found to be 71.1% +/- 1.4, 67.6% +/- 2.9 and 55.2% +/- 0.3 after 3 months, respectively. Highest degradation was observed with NE at all the storage temperatures indicating even importance of the carrier structure.     

Lipid nanoparticles (SLN, NLC) in cosmetic and pharmaceutical dermal products

Solid lipid nanoparticles (SLN) are distinguishable from nanostructured lipid carriers (NLC) by the composition of the solid particle matrix. Both are an alternative carrier system to liposomes and emulsions. This review paper focuses on lipid nanoparticles for dermal application. Production of lipid nanoparticles and final products containing lipid nanoparticles is feasible by well-established production methods. SLN and NLC exhibit many features for dermal application of cosmetics and pharmaceutics, i.e. controlled release of actives, drug targeting, occlusion and associated with it penetration enhancement and increase of skin hydration. Due to the production of lipid nanoparticles from physiological and/or biodegradable lipids, this carrier system exhibits an excellent tolerability. The lipid nanoparticles are a "nanosafe" carrier. Furthermore, an overview of the cosmetic products currently on the market is given and the improvement of the benefit/risk ratio of the topical therapy is shown.     

Structural investigations on nanoemulsions, solid lipid nanoparticles and nanostructured lipid carriers by cryo-field emission scanning electron microscopy and Raman spectroscopy

Recently, colloidal dispersions based on solid lipids (solid lipid nanoparticles, SLN) and mixtures of solid and liquid lipids (nanostructured lipid carriers, NLC) were described as innovative carrier systems. A spherical particle shape is the basis of features such as a high loading capacity and controlled drug release characteristics due to smaller lipid-water interfaces and longer diffusion pathways when compared to thin platelets. The structures of SLN and the influence of oil load (NLC) on particle properties were investigated by photon correlation spectroscopy (PCS), laser diffractometry (LD), cryo-field emission scanning electron microscopy (cryo-FESEM), Raman spectroscopy and infrared spectroscopy (IR), and compared to a conventional nanoemulsion. PCS and LD data show similar size and size distribution for SLN and NLC (approximately 210 nm, polydispersity index approximately 0.15) and suggested a long term physical stability for the dispersions which had been stored for up to 12 months at different temperatures. Using cryo-FESEM droplets (for the nanoemulsion) and almost spherical particles for SLN and NLC were observed. Raman spectroscopy resulted in spectra for NLC that are weighted to the SLN spectra, suggesting an undisturbed crystal structure. Infrared spectra of the NLC are predominantly SLN in nature. Importantly the SLN bands are unshifted in the NLC spectrum indicating that the crystalline structure is unaffected by the presence of the oil.     

Investigation of the factors influencing the incorporation of clotrimazole in SLN and NLC prepared by hot high-pressure homogenization

Clotrimazole, a fungicidal effective for the local treatment of cutaneous and mucosal infections, was incorporated into solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The aim was to increase its dermal bioavailability and to control drug release, thereby potentially reducing its side effects. Prior to the release studies, the carrier was optimized and characterized by using different techniques. Laser diffractometry (LD), photon correlation spectroscopy (PCS) and scanning electron microscopy (SEM) indicated that SLN were spherical in shape with a mean size of approximately 400 nm. Some aggregation phenomena occurred during preparation of SEM samples due to the lipid character of the carriers. No physico-chemical instability of the drug-loaded lipid nanoparticles was detected during 2 years of storage at different temperatures. X-ray and DSC results suggested that during storage time the drug remained molecularly dispersed in the lipid matrix. Drug associated to SLN and NLC in its crystal form could be excluded.     

Lipid nanoparticles as carrier for octyl-methoxycinnamate: in vitro percutaneous absorption and photostability studies

The aim of the present study was the evaluation of lipid nanoparticles (solid lipid nanoparticles, SLN, and nanostructured lipid carriers, NLC) as potential carriers for octyl-methoxycinnamate (OMC). The release pattern of OMC from SLN and NLC was evaluated in vitro, determining its percutaneous absorption through excised human skin. Additional in vitro studies were performed in order to evaluate, after UVA radiation treatment, the spectral stability of OMC-loaded lipid nanoparticles. From the obtained results, ultrasonication method yielded both SLN and NLC in the nanometer range with a high active loading and a particle shape close to spherical. Differential scanning calorimetry data pointed out the key role of the inner oil phase of NLC in stabilizing the particle architecture and in increasing the solubility of OMC as compared with SLN. In vitro results showed that OMC, when incorporated in viscosized NLC dispersions (OMC-NLC), exhibited a lower flux with respect to viscosized SLN dispersions (OMC-SLN) and two reference formulations: a microemulsion (OMC-ME) and a hydroalcoholic gel (OMC-GEL). Photostability studies revealed that viscosized NLC dispersions were the most efficient at preserving OMC from ultraviolet-mediated photodegradation.     

Cyproterone Acetate Loading to Lipid Nanoparticles for Topical Acne Treatment: Particle Characterisation and Skin Uptake

Purpose Topical cyproterone acetate (CPA) treatment of skin diseases should reduce side effects currently excluding the use in males and demanding contraceptive measures in females. To improve skin penetration of the poorly absorbed drug, we intended to identify the active moiety and to load it to particulate carrier systems. Materials and Methods CPA metabolism in human fibroblasts, keratinocytes and a sebocyte cell line as well as androgen receptor affinity of native CPA and the hydrolysis product cyproterone were determined. CPA 0.05% loaded solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), a nanoemulsion and micropheres were characterized for drug-particle interaction and CPA absorption using human skin ex-vivo. Results Native CPA proved to be the active agent. Application of CPA attached to SLN increased skin penetration at least four-fold over the uptake from cream and nanoemulsion. Incorporation into the lipid matrix of NLC and microspheres resulted in a 2–3-fold increase in CPA absorption. Drug amounts within the dermis were low with all preparations. No difference was seen in the penetration into intact and stripped skin. Conclusion With particulate systems topical CPA treatment may be an additional therapeutic option for acne and other diseases of the pilosebaceous unit.     

Lipid nanoparticles for improved topical application of drugs for skin diseases

Due to the lower risk of systemic side effects topical treatment of skin disease appears favourable, yet the stratum corneum counteracts the penetration of xenobiotics into viable skin. Particulate carrier systems may mean an option to improve dermal penetration. Since epidermal lipids are found in high amounts within the penetration barrier, lipid carriers attaching themselves to the skin surface and allowing lipid exchange between the outermost layers of the stratum corneum and the carrier appear promising. Besides liposomes, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) have been studied intensively. Here we describe the potential of these carrier systems and compare the dermal uptake from SLN and NLC to the one of alternative vehicle systems. A special focus is upon the interactions of active ingredients and the lipid matrix as well as the quantification of dermal penetration.     

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in cosmetic and dermatological preparations

Solid lipid nanoparticles (SLN) were developed at the beginning of the 1990 s as an alternative carrier system to emulsions, liposomes and polymeric nanoparticles. The paper reviews advantages-also potential limitations-of SLN for the use in topical cosmetic and pharmaceutical formulations. Features discussed include stabilisation of incorporated compounds, controlled release, occlusivity, film formation on skin including in vivo effects on the skin. As a novel type of lipid nanoparticles with solid matrix, the nanostructured lipid carriers (NLC) are presented, the structural specialties described and improvements discussed, for example, increase in loading capacity, physical and chemical long-term stability, triggered release and potentially supersaturated topical formulations. For both SLN and NLC, the technologies to produce the final topical formulation are described, especially the production of highly concentrated lipid nanoparticle dispersions >30-80% lipid content. Production issues also include clinical batch production, large scale production and regulatory aspects (e. g. status of excipients or proof of physical stability).     

Cetyl palmitate-based NLC for topical delivery of Coenzyme Q(10) - development, physicochemical characterization and in vitro release studies.

In the present study, nanostructured lipid carriers (NLC) composed of cetyl palmitate with various amounts of caprylic/capric triacylglycerols (as liquid lipid) were prepared and Coenzyme Q(10) (Q(10)) has been incorporated in such carriers due to its high lipophilic character. A nanoemulsion composed solely of liquid lipid was prepared for comparison studies. By photon correlation spectroscopy a mean particle size in the range of 180-240nm with a narrow polydispersity index (PI) lower than 0.2 was obtained for all developed formulations. The entrapment efficiency was 100% in all cases. The increase of oil loading did not affect the mean particle size of NLC formulations. NLC and nanoemulsion, stabilized by the same emulsifier, showed zeta potential values in the range -40/-50mV providing a good physical stability of the formulations. Scanning electron microscopy studies revealed NLC of disc-like shape. With respect to lipid polymorphism, a decrease in the ordered structure of NLC was observed with the increase of both oil and Q(10) loadings, allowing therefore high accommodation for Q(10) within the NLC. Using static Franz diffusion cells, the in vitro release studies demonstrated that Q(10)-loaded NLC possessed a biphasic release pattern, in comparison to Q(10)-loaded nanoemulsions comprising similar composition of which a nearly constant release was observed. The NLC release patterns were defined by an initial fast release in comparison to the release of NE followed by a prolonged release, which was dependent on the oil content.     

Skin permeation of buprenorphine and its ester prodrugs from lipid nanoparticles: lipid emulsion,nanostructured lipid carriers and solid lipid nanoparticles

The aim of this study was to develop and characterize lipid nanoparticle systems for the transdermal delivery of buprenorphine and its prodrugs. A panel of three buprenorphine prodrugs with ester chains of various lengths was synthesized and characterized by solubility, capacity factor (log K′), partitioning between lipids and water and the ability to penetrate nude mouse skin. Colloidal systems made of squalene (lipid emulsion, LE), squalene + Precirol (nanostructured lipid carriers, NLC) and Precirol (solid lipid nanoparticles, SLN) as the lipid core material were prepared. Differential scanning calorimetry showed that the SLN had a more-ordered crystalline lattice in the inner matrix compared to the NLC. The particle size ranged from 220–300 nm, with NLC showing the smallest size. All prodrugs were highly lipophilic and chemically stable, but enzymatically unstable in skin homogenate and plasma. The in vitro permeation results exhibited a lower skin delivery of drug/prodrug with an increase in the alkyl chain length. SLN produced the highest drug/prodrug permeation, followed by the NLC and LE. A small inter-subject variation was also observed with SLN carriers. SLN with soybean phosphatidylcholine (SLN-PC) as the lipophilic emulsifier showed a higher drug/prodrug delivery across the skin compared to SLN with Myverol, a palmitinic acid monoglyceride. The in vitro permeation of the prodrugs occurred in a sustained manner for SLN-PC. The skin permeation of buprenorphine could be adjusted within a wide range by combining a prodrug strategy and lipid nanoparticles.     

Preparation, characterization and physico-chemical properties of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC): their benefits as colloidal drug carrier systems

Solid lipid nanoparticles (SLN) have attracted increasing attention by various research groups and companies since the early 1990s. Their advantages over existing traditional carriers have been clearly documented. In addition, modified SLN have been described which are nanostructured lipid carriers (NLC) composed of liquid lipid blended with a solid lipid to form a nanostructured solid particle matrix. NLC combine controlled release characteristics with some advantages over SLN. This paper reviews the production techniques, characterization and physical stability of these systems including destabilizing factors and principles of drug loading, then considers aspects and benefits of SLN and NLC as colloidal drug carriers.     

Solid Lipid Nanoparticles (SLN) and Oil-Loaded SLN Studied by Spectrofluorometry and Raman Spectroscopy

Purpose Recently, colloidal dispersions made of mixtures from solid and liquid lipids have been described to overcome the poor drug loading capacity of solid lipid nanoparticles (SLN). It has been proposed that these nanostructured lipid carriers (NLC) are composed of oily droplets, which are embedded in a solid lipid matrix. High loading capacities and controlled release characteristics have been claimed. It is the objective of the present paper to investigate these new NLC particles in more detail to obtain insights into their structure. Methods Colloidal lipid dispersions were produced by high-pressure homogenization. Particle sizes were estimated by laser diffraction and photon correlation spectroscopy. The hydrophobic fluorescent marker nile red (NR) was used as model drug, and by fluorometric spectroscopy, the molecular environment (polarity) was elucidated because of solvatochromism of NR. The packaging of the lipid nanoparticles was investigated by Raman spectroscopy and by densimetry. The light propagation in lipid nanodispersions was examined by refractometry to obtain further insights into the nanostructural compositions of the carriers. Results Fluorometric spectroscopy clearly demonstrates that NLC nanoparticles offer two nanocompartments of different polarity to accommodate NR. Nevertheless, in both compartments, NR experiences less protection from the outer water phase than in a nanoemulsion. In conventional SLN, lipid crystallization leads to the expulsion of the lipophilic NR from the solid lipid. Measurements performed by densimetry and Raman spectroscopy confirm the idea of intact glyceryl behenate lattices in spite of oil loading. The lipid crystals are not disturbed in their structure as it could be suggested in case of oil incorporation. Refractometric data reveal the idea of light protection because of incorporation of sensitive drug molecules in NLC. Conclusion Neither SLN nor NLC lipid nanoparticles did show any advantage with respect to incorporation rate compared to conventional nanoemulsions. The experimental data let us conclude that NLC lipid nanoparticles are not spherical solid lipid particles with embedded liquid droplets, but they are rather solid platelets with oil present between the solid platelet and the surfactant layer.     

Lipid nanoparticles as novel delivery systems for cosmetics and dermal pharmaceuticals

INTRODUCTION: Lipid nanoparticles are innovative carrier systems developed as an alternative to traditional vehicles such as emulsions, liposomes and polymeric nanoparticles. Solid lipid nanoparticles (SLN) and the newest nanostructured lipid carriers (NLC) show important advantages for dermal application of cosmetics and pharmaceuticals. AREA COVERED: This article focuses on the main features of lipid nanoparticles, in terms of their preparation and recent advancements. A detailed review of the literature is presented, introducing the importance of these systems in the topical delivery of drugs and active substances. EXPERT OPINION: Lipid nanoparticles are able to enhance drug penetration into the skin, allowing increased targeting to the epidermis and consequently increasing treatment efficiency and reducing the systemic absorption of drugs and cosmetic actives. The complete biodegradation of lipid nanoparticles and their biocompatible chemical nature have secured them the title of 'nanosafe carriers.' SLN and NLC represent a new technological era, which has been taken over by the cosmetic and pharmaceutical industry, which will open new channels for effective topical delivery of substances.     

Nanostructured lipid carriers (NLC) in cosmetic dermal products

The first generation of lipid nanoparticles was introduced as solid lipid nanoparticles (SLN), the second, improved generation as nanostructured lipid carriers (NLC). Identical to the liposomes, the lipid nanoparticles (NLC) appeared as products first on the cosmetic market. The article gives an overview of the cosmetic benefits of lipid nanoparticles, that means enhancement of chemical stability of actives, film formation, controlled occlusion, skin hydration, enhanced skin bioavailability and physical stability of the lipid nanoparticles as topical formulations. NLC are on the market as concentrates to be used as cosmetic excipients, special formulation challenges for these products are discussed. NLC appeared also in a number of finished cosmetic products world-wide. An overview of these products is provided including their special effects due to the lipid nanoparticles, lipids used for their production and incorporated cosmetic actives.     

Effect of lipid types on physicochemical characteristics,stability and antioxidant activity of gamma-oryzanol-loaded lipid nanoparticles

In the present study gamma-oryzanol, an antioxidant, was incorporated into three different types of solid lipid: wax, triglycerides, a mixture of glycerides as solid lipid nanoparticles (SLN) and liquid lipid (Miglyol 812) as nanoemulsion (NE). Instability was found only from NE due to its significant increase in particle size and decreased entrapment efficiency (%EE) at a storage temperature of 45°C. Solid lipid type in SLN plays an important role only on %EE, but not chemical stability. A decrease in crystallinity of SLN was observed with the incorporation of gamma-oryzanol and low recrystallization index were found with two glycerides-based SLN. The in vitro release studies demonstrated that a biphasic release pattern fitted well with the Higuchi model of SLN formulations. In comparison, nearly constant release was observed in NE comprised of similar composition. Wax-based SLN demonstrated the lowest cytotoxicity. NE, wax-based SLN and a mixture of glycerides-based SLN were considered to enhance the antioxidant activity of gamma-oryzanol.     

Evaluation of the physical stability of SLN and NLC before and after incorporation into hydrogel formulations.

Aqueous dispersions of lipid nanoparticles are being investigated as drug delivery systems for different therapeutic purposes. One of their interesting features is the possibility of topical use, for which these systems have to be incorporated into commonly used dermal carriers, such as creams or hydrogels, in order to have a proper semisolid consistency. For the present investigation four different gel-forming agents (xanthan gum, hydroxyethylcellulose 4000, Carbopol943 and chitosan) were selected for hydrogel preparation. Aqueous dispersions of lipid nanoparticles--solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC)--made from tripalmitin were prepared by hot high pressure homogenization and then incorporated into the freshly prepared hydrogels. NLC differ from SLN due to the presence of a liquid lipid (Miglyol812) in the lipid matrix. Lipid nanoparticles were physically characterized before and after their incorporation into hydrogels. By means of rheological investigations it could be demonstrated that physical properties of the dispersed lipid phase have a great impact on the rheological properties of the prepared semisolid formulations. By employing an oscillation frequency sweep test, significant differences in elastic response of SLN and NLC aqueous dispersions could be observed.     

Hydrophilic coating of mitotane-loaded lipid nanoparticles: Preliminary studies for mucosal adhesion

The aim of the present work was to load mitotane, an effective drug for adrenocortical carcinoma treatment, in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The SLN and NLC were successfully prepared by high shear homogenization followed by hot high pressure homogenization. Formulations were composed of cetyl palmitate as the solid lipid for SLN, whereas for NLC PEGylated stearic acid was selected as solid lipid and medium chain triacylglycerols as the liquid lipid. Tween® 80 and Span® 85 were used as surfactants for all formulations. The particle size, zeta potential, polydispersity index (PI), encapsulation efficiency (EE), and loading capacity (LC) were evaluated. The SLN showed a mean particle size of 150?nm, PI of 0.20, and surface charge ?10 mV, and the EE and LC could reach up to 92.26% and 0.92%, respectively. The NLC were obtained with a mean particle size of 250?nm, PI of 0.30, zeta potential ?15 mV and 84.50% EE, and 0.84% LC, respectively. Hydrophilic coating of SLN with chitosan or benzalkonium chloride was effective in changing zeta potential from negative to positive values. The results suggest that mitotane was efficiently loaded in SLN and in NLC, being potential delivery systems for improving mitotane LC and controlled drug release.     

Formulation and in vitro characterization of domperidone loaded solid lipid nanoparticles and nanostructured lipid carriers

Background and the purpose of the study

Domperidone (DOM) is a dopamine- receptor (D₂) antagonist, widely used in the treatment of motion-sickness. The pharmacokinetic parameters of DOM make it a suitable candidate for development of Solid Lipid Nanoparticle (SLN) and Nanostructured Lipide Carrier (NLC). The purpose of the present investigation was to prepare and evaluate DOM loaded solid lipid nanoparticles (DOM-SLN) and DOM loaded nanostructured lipid carriers (DOM-NLC).

Methods

DOM loaded SLN and NLC were prepared by hot homogenization followed by ultrasonication technique, using trimyristin as solid lipid, cetyl recinoleate as liquid lipid and a mixture of soy phosphatidylcholine (99%) and tween 80 as surfactant. SLN and NLC were characterized for particle size, polydispersity index (PDI), zeta potential and entrapment efficiency. The effects of composition of lipid materials and surfactant mixture on the particle size, PDI, zeta potential, drug entrapment efficiency, and in vitro drug release behavior were investigated. DSC analysis was performed to characterize the state of drug and lipid modification. Shape and surface morphology were determined by transmission electron microscopy (TEM). SLN and NLC formulations were subjected to stability study over a period of 40 days.

Results

The mean particle size, PDI, zeta potential and entrapment efficiency of optimized SLN (SLN1) and NLC were found to be 30.45 nm, 0.156, 12.40 mV, 87.84% and 32.23 nm, 0.160, 10.47 mV, 90.49% respectively. DSC studies revealed that DOM was in an amorphous state and triglycerides were in the β prime form in SLN and NLC. Shape and surface morphology was determined by TEM revealed fairly spherical shape of nanoparticles. In vitro release studies demonstrated that both the SLN and NLC formulations possessed a controlled release over a period of 24 hrs. SLN and NLC formulations were subjected to stability over a period of 40 days. There was no significant (P<0.05) change in particle size, zeta potential, PDI and entrapment efficiency indicating the developed SLN and NLC were fairly stable.

Conclusion

Fairly spherical shaped, stable and controlled release DOM-SLN and DOM-NLC could be prepared by hot homogenization followed by ultrasonication technique.