Stability of dobutamine hydrochloride and verapamil hydrochloride in 0.9% sodium chloride and 5% dextrose injections

The stability of dobutamine hydrochloride (250 micrograms/ml) and verapamil hydrochloride (160 micrograms/ml) alone and in combination in 0.9% sodium chloride injection or 5% dextrose injection was studied. Solutions were stored both in plastic i.v. bags and in amber-colored glass bottles at 24 degrees C and 5 degrees C for up to seven days. Before storage and at various times during storage, solutions were assayed at least in triplicate by high-performance liquid chromatography, pH was recorded, and visual appearance was noted. All solutions tested under all conditions retained at least 90% potency for seven days. In plastic i.v. bags, dobutamine either alone or in combination with verapamil in both diluents turned a light-pink color in 24 hours at 24 degrees C. The intensity of the pink color increased with time in 0.9% sodium chloride injection; in 5% dextrose injection, solutions, became clear in 48 hours. The pH of solutions prepared in plastic i.v. bags in 5% dextrose injection decreased from 4.0 to 3.1 during the seven-day period at 24 degrees C; results for solutions in amber bottles were similar. At 5 degrees C, the pH and clarity of all solutions in bags and bottles remained stable for seven days. At the concentrations tested, dobutamine hydrochloride combined with verapamil hydrochloride is stable in 0.9% sodium chloride injection and 5% dextrose injection for 48 hours at 24 degrees C and for seven days at 5 degrees C.     

Stability of vancomycin hydrochloride in various concentrations of dextrose injection

The stability of vancomycin hydrochloride in plastic syringes containing high concentrations of dextrose injection after storage for 24 hours in a refrigerator followed by storage for two hours at room temperature was studied. Vancomycin hydrochloride was reconstituted with sterile water for injection to a concentration of 50 mg/mL. One-milliliter samples were added to 9 mL of various concentrations of dextrose injection (5, 10, 15, 20, 25, and 30%) in 10-mL plastic syringes. Ten syringes of each concentration were stored at 4 degrees C for 24 hours. At various storage times, samples were assayed in triplicate for vancomycin using high-performance liquid chromatography. After 24 hours, the syringes were removed from the refrigerator, and the vancomycin concentration was determined after storage for two hours at room temperature. Percent change in vancomycin concentration during storage for 24 hours was less than 6% in all cases except for 5% dextrose injection at 4 and 24 hours. Vancomycin concentration did not change (percent change 0.7-5%) during storage for two hours at room temperature. Vancomycin hydrochloride is stable in various concentrations of dextrose injection when stored in plastic syringes for 24 hours in the refrigerator followed by two hours at room temperature.     

Stability and sorption of FK 506 in 5% dextrose injection and 0.9% sodium chloride injection in glass, polyvinyl chloride, and polyolefin containers.

The effects of the diluent, the storage container, light, and infusion through various types of tubing on the stability and sorption of FK 506 were studied. Solutions of FK 506 in 0.9% sodium chloride injection or 5% dextrose injection were stored at room temperature (24 +/- 2 degrees C) in glass i.v. bottles, polyvinyl chloride (PVC) minibags, and polyolefin containers. FK 506 solution in 0.9% sodium chloride injection was stored in plastic syringes at room temperature and either exposed to normal room light or stored in the dark. FK 506 solution in 5% dextrose injection was placed in plastic syringes and infused through PVC anesthesia extension tubing, PVC i.v. administration set tubing, and fat emulsion tubing over a two-hour period. The infused samples and samples collected from the containers and syringes at intervals up to 48 hours were analyzed for FK 506 concentration by high-performance liquid chromatography. FK 506 concentrations remained greater than 90% of initial concentration for admixtures in 5% dextrose injection stored in glass bottles for 48 hours and for admixtures in 5% dextrose injection or 0.9% sodium chloride injection stored in polyolefin containers for 48 hours. No change in concentration was measured for admixtures in 0.9% sodium chloride injection stored in plastic syringes, and exposure to light did not affect the stability of FK 506 solution. No substantial change in concentration occurred in FK 506 solution in 5% dextrose injection infused through PVC anesthesia extension tubing, PVC i.v. administration set tubing, or fat emulsion tubing. FK 506 admixtures prepared with 5% dextrose injection or 0.9% sodium chloride injection should be stored in polyolefin containers. If polyolefin containers are not available, solutions should be prepared with 5% dextrose injection and stored in glass bottles.     

Stability of ganciclovir sodium in 5% dextrose injection and in 0.9% sodium chloride injection over 35 days.

The stability of ganciclovir 1 and 5 mg/mL in 5% dextrose injection and in 0.9% sodium chloride injection was studied at 25 degrees C and 5 degrees C over 35 days. Ganciclovir (as the sodium salt) was added to 120 polyvinyl chloride bags containing either 5% dextrose injection or 0.9% sodium chloride injection to attain ganciclovir concentrations of 1 and 5 mg/mL. Thirty bags were prepared for each combination of drug concentration and i.v. solution. Half of the bags in each group were stored at 25 degrees C; the other half were stored at 5 degrees C. Samples withdrawn from all 120 bags immediately after preparation were frozen for later determination of initial concentration. At 7, 14, 21, 28, and 35 days after preparation, approximately 5-mL samples representing each test condition were withdrawn for analysis. The samples were visually examined, tested for pH, and assayed by high-performance liquid chromatography. There was no significant loss of ganciclovir under any of the study conditions over 35 days. All solutions were clear throughout the study period. The pH decreased slightly in both diluents at both ganciclovir concentrations but did not deviate from the manufacturer's range (9-11). Admixtures containing ganciclovir 1 and 5 mg/mL (as the sodium salt) in 5% dextrose injection and 0.9% sodium chloride injection were stable in polyvinyl chloride bags stored at 25 degrees C and 5 degrees C for 35 days.     

Stability of amiodarone hydrochloride in admixtures with other injectable drugs

The stability of amiodarone hydrochloride in intravenous admixtures was studied. Amiodarone hydrochloride 900 mg was mixed with 500 mL of either 5% dextrose injection or 0.9% sodium chloride injection in polyvinyl chloride or polyolefin containers; identical solutions were also mixed with either potassium chloride 20 meq, lidocaine hydrochloride 2000 mg, quinidine gluconate 500 mg, procainamide hydrochloride 2000 mg, verapamil hydrochloride 25 mg, or furosemide 100 mg. All admixtures were prepared in triplicate and stored for 24 hours at 24 degrees C. Amiodarone concentrations were determined using a stability-indicating high-performance liquid chromatographic assay immediately after admixture and at intervals during storage. Each solution was visually inspected and tested for pH. Amiodarone concentrations decreased less than 10% in all admixtures except those containing quinidine gluconate in polyvinyl chloride containers. The only visual incompatibility observed was in admixtures containing quinidine gluconate and 5% dextrose injection. In most solutions pH either decreased slightly or remained unchanged. Amiodarone hydrochloride is stable when mixed with either 5% dextrose injection or 0.9% sodium chloride injection in polyvinyl chloride or polyolefin containers alone or with potassium chloride, lidocaine, procainamide, verapamil, or furosemide and stored for 24 hours at 24 degrees C. Amiodarone should not be mixed with quinidine gluconate in polyvinyl chloride containers.     

Physical and chemical stability of gemcitabine hydrochloride solutions.

OBJECTIVE: To evaluate the physical and chemical stability of gemcitabine hydrochloride (Gemzar-Eli Lilly and Company) solutions in a variety of solution concentrations, packaging, and storage conditions. DESIGN: Controlled experimental trial. SETTING: Laboratory. INTERVENTIONS: Test conditions included (1) reconstituted gemcitabine at a concentration of 38 mg/mL as the hydrochloride salt in 0.9% sodium chloride or sterile water for injection in the original 200 mg and 1 gram vials; (2) reconstituted gemcitabine 38 mg/mL as the hydrochloride salt in 0.9% sodium chloride injection packaged in plastic syringes; (3) diluted gemcitabine at concentrations of 0.1 and 10 mg/mL as the hydrochloride salt in polyvinyl chloride (PVC) minibags of 0.9% sodium chloride injection and 5% dextrose injection; and (4) gemcitabine 0.1, 10, and 38 mg/mL as the hydrochloride salt in 5% dextrose in water and 0.9% sodium chloride injection as simulated ambulatory infusions at 32 degrees C. Test samples of gemcitabine hydrochloride were prepared in the concentrations, solutions, and packaging required. MAIN OUTCOME MEASURES: Physical and chemical stability based on drug concentrations initially and after 1, 3, and 7 days of storage at 32 degrees C and after 1, 7, 14, 21, and 35 days of storage at 4 degrees C and 23 degrees C. RESULTS: The reconstituted solutions at a gemcitabine concentration of 38 mg/mL as the hydrochloride salt in the original vials occasionally exhibited large crystal formation when stored at 4 degrees C for 14 days or more. These crystals did not redissolve upon warming to room temperature. All other samples were physically stable throughout the study. Little or no change in particulate burden or the presence of haze were found. Gemcitabine as the hydrochloride salt in the solutions tested was found to be chemically stable at all concentrations and temperatures tested that did not exhibit crystallization. Little or no loss of gemcitabine occurred in any of the samples throughout the entire study period. However, refrigerated vials that developed crystals also exhibited losses of 20% to 35% in gemcitabine content. Exposure to or protection from light did not alter the stability of gemcitabine as the hydrochloride salt in the solutions tested. CONCLUSION: Reconstituted gemcitabine as the hydrochloride salt in the original vials is chemically stable at room temperature for 35 days but may develop crystals when stored at 4 degrees C. The crystals do not redissolve upon warming. Gemcitabine prepared as intravenous admixtures of 0.1 and 10 mg/mL as the hydrochloride salt in 5% dextrose injection and 0.9% sodium chloride injection in PVC bags and as a solution of 38 mg/mL in 0.9% sodium chloride injection packaged in plastic syringes is physically and chemically stable for at least 35 days at 4 degrees C and 23 degrees C. Gemcitabine as the hydrochloride salt is stable for at least 7 days at concentrations of 0.1, 10, and 38 mg/mL in 5% dextrose injection and 0.9% sodium chloride injection stored at 32 degrees C during simulated ambulatory infusion.     

Compatibility of ondansetron hydrochloride and methylprednisolone sodium succinate in multilayer polyolefin containers.

PURPOSE: The compatibility of ondansetron hydrochloride and methylprednisolone sodium succinate in 5% dextrose injection and 0.9% sodium chloride injection was studied. METHODS: Test solutions of ondansetron hydrochloride 0.16 mg/mL and methylprednisolone sodium succinate 2.4 mg/mL were prepared in triplicate and tested in duplicate. Total volumes of 4 and 2 mL of ondansetron hydrochloride solution and methylprednisolone sodium succinate solution, respectively, were added to 50-mL multilayer polyolefin bags containing 5% dextrose injection or 0.9% sodium chloride injection. Bags were stored for 24 hours at 20-25 degrees C and for 48 hours at 4-8 degrees C. Chemical compatibility was measured with high-performance liquid chromatography, and physical compatibility was determined visually. RESULTS: Ondansetron hydrochloride was stable for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C. Methylprednisolone sodium succinate was stable for up to 48 hours at 4-8 degrees C. When stored at 20-25 degrees C, methylprednisolone sodium succinate was stable for up to 7 hours in 5% dextrose injection and up to 24 hours in 0.9% sodium chloride injection. Compatibility data for solutions containing ondansetron hydrochloride plus methylprednisolone sodium succinate revealed that each drug was stable for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C. CONCLUSION: Ondansetron 0.16 mg/mL (as the hydrochloride) and methylprednisolone 2.4 mg/mL (as the sodium succinate) mixed in 50-mL multilayer polyolefin bags were stable in both 5% dextrose injection and 0.9% sodium chloride injection for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C.     

Stability of ranitidine admixtures frozen and refrigerated in minibags

The stability of ranitidine hydrochloride stored frozen and refrigerated in polyvinyl chloride minibags was studied. Ranitidine hydrochloride was added to either 5% dextrose injection or 0.9% sodium chloride injection to yield concentrations of 0.5, 1.0, and 2.0 mg/mL. In phase 1 of the study, admixtures containing ranitidine hydrochloride 1 mg/mL were stored at 4 degrees C for 10 days. In phase 2, solutions were frozen for 30 days at -30 degrees C and were later refrigerated for 14 days. Ranitidine concentration was tested using a stability-indicating high-performance liquid chromatographic assay at time zero and at intervals during storage. Sterility tests were performed on some samples, and various admixtures were visually inspected and tested for pH. At least 90% of the initial concentration of ranitidine remained in all solutions at all storage conditions. No visual changes or changes in pH or sterility were observed. Ranitidine hydrochloride in concentrations of 0.5, 1.0, and 2.0 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection may be stored in polyvinyl chloride minibags frozen for 30 days followed by refrigeration for an additional 14 days.     

Droperidol stability in intravenous admixtures

The stability and compatibility of droperidol in small-volume i.v. admixtures was assessed. Droperidol was diluted to a nominal concentration of 1 mg/50 ml in 5% dextrose injection, 0.9% sodium chloride injection, and lactated Ringer's injection in type I glass bottles and polyvinyl chloride bags. Triplicate samples of each admixture were stored under continuous illumination at 27 +/- 2 degrees C. Specimens from each sample were tested by spectrophotometric assay at intervals during storage periods of up to 272 hours for admixtures containing 5% dextrose injection and 0.9% sodium chloride injection and up to 168 hours for admixtures containing lactated Ringer's injection. Between 48 and 168 hours of storage, a 7% increase was observed in droperidol concentration in 0.9% sodium chloride admixtures in polyvinyl chloride bags. A 24% decrease in droperidol concentration in lactated Ringer's admixtures in polyvinyl chloride bags between 24 and 168 hours was attributed to sorption of droperidol by the plastic container. In all admixtures except those containing lactated Ringer's injection in polyvinyl chloride bags, droperidol concentrations throughout the storage period were within 10% of initial concentrations. Droperidol is stable in the admixtures studied for 7 to 10 days in glass bottles. In polyvinyl chloride bags, concentrations in admixtures containing 5% dextrose injection and 0.9% sodium chloride injection are stable for seven days, but concentrations decrease significantly in lactated Ringer's admixtures.     

Stability of pibenzimol hydrochloride in commonly used infusion solutions and after filtration

The stability of pibenzimol hydrochloride was evaluated after reconstitution, after addition to several intravenous fluids, and after filtration. Vials containing pibenzimol hydrochloride 50 mg were reconstituted with 2.5 mL of 0.9% sodium chloride injection to 20 mg/mL. For determination of drug stability in intravenous fluids, vial contents were further diluted to 0.15 mg/mL by injection into glass containers and polyvinyl chloride (PVC) bags containing 250 mL of 5% dextrose injection, 0.9% sodium chloride injection, or lactated Ringer's injection. Pibenzimol concentrations were determined immediately after preparation and at various intervals after storage at 4-6 degrees C or 25 degrees C by means of a stability-indicating, high-performance liquid chromatographic technique. Vial contents were inspected visually for color changes, and pH was measured. Determinations were also made of the stability of pibenzimol 0.15 mg/mL in 0.9% sodium chloride injection after simulated infusions using a 0.22-micron filter set at 25 degrees C. All study solutions and admixtures retained more than 90% of the initial pibenzimol concentration. The greatest loss of drug (6-7%) occurred after 24 hours in lactated Ringer's injection in both glass and PVC containers and in 0.9% sodium chloride injection in PVC bags. No drug loss occurred as a result of filtration. Reconstituted pibenzimol hydrochloride and admixtures of pibenzimol in 5% dextrose injection, 0.9% sodium chloride injection, or lactated Ringer's injection in glass or PVC containers are stable for at least 24 hours at 25 degrees C. Filtration has no effect on stability.     

Stability of ondansetron hydrochloride in injectable solutions at -20, 5, and 25 degrees C.

The stability of ondansetron hydrochloride in 5% dextrose injection and in 0.9% sodium chloride injection when stored frozen, refrigerated, and at room temperature was studied. Solutions of ondansetron 0.03 and 0.3 mg/mL (as the hydrochloride salt) were prepared by adding 1.5 or 15 mg of the drug to 50-mL minibags containing 5% dextrose injection or 0.9% sodium chloride injection. All solutions were prepared in triplicate, and each container was tested in duplicate. Testing at the time of preparation and at each subsequent test interval included visual inspection of color and clarity, determination of pH, and a stability-indicating high-performance liquid chromatographic assay to measure the ondansetron concentration. Conditions assessed included storage at -20 degrees C for two weeks to three months, 5 degrees C for 7-14 days, approximately 25 degrees C for up to 48 hours, and various combinations of these conditions. The concentration of ondansetron in each solution remained above 90% of the original concentration at each observation time under all storage conditions. No changes in color or clarity were observed, and there were only minor changes in pH. Ondansetron 0.03 and 0.3 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection was stable when stored (1) for up to three months at -20 degrees C, followed by up to 14 days at 5 degrees C and by 48 hours at 25 degrees C and (2) for up to 14 days at 5 degrees C, followed by up to 48 hours at 25 degrees C.     

Stability of intravenous admixtures of aztreonam and cefoxitin, gentamicin, metronidazole, or tobramycin

The stability of aztreonam and cefoxitin, gentamicin, metronidazole, or tobramycin in intravenous admixtures containing aztreonam and one of the other drugs was studied. Admixtures of aztreonam and gentamicin, aztreonam and tobramycin, and aztreonam and cefoxitin were each prepared in four different concentrations in both 0.9% sodium chloride injection and 5% dextrose injection. Admixtures of aztreonam and metronidazole were prepared in two different concentrations using a commercially available solution of metronidazole 5 mg/mL in a phosphate-citrate buffer. One of each of these admixtures was stored at 25 degrees C for 48 hours and at 4 degrees C for seven days. At various storage times, 1-mL samples of the admixtures were tested for pH and assayed using high-performance liquid chromatography or fluorescence polarization immunoassay. The pH of all admixtures except admixtures of aztreonam and cefoxitin decreased only slightly during storage. Concentrations of aztreonam and tobramycin under both storage conditions decreased by less than 10%. Concentrations of cefoxitin and aztreonam decreased by more than 10% at 25 degrees C, and concentrations of gentamicin decreased by more than 10% under both storage conditions. Visual inspection of admixtures of aztreonam and metronidazole revealed an incompatibility between the two drugs, as evidenced by the appearance of a cherry-red color. Admixtures of aztreonam 10 and 20 mg/mL and tobramycin 0.2 and 0.8 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection are stable for 48 hours at 25 degrees C or seven days at 4 degrees C. Admixtures of aztreonam 10 and 20 mg/mL and gentamicin 0.2 and 0.8 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection are stable for eight hours at 25 degrees C and 24 hours at 4 degrees C. Admixtures of aztreonam 10 and 20 mg/mL and cefoxitin 10 and 20 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection are stable for 12 hours at 25 degrees C and seven days at 4 degrees C. Aztreonam and metronidazole should be administered separately.     

Stability of mitomycin admixtures

The stability of mitomycin in admixtures for continuous intravenous infusion was studied. Mitomycin was reconstituted and diluted to 50 micrograms/mL in polyvinyl chloride minibags containing 5% dextrose injection 50 mL or 0.9% sodium chloride injection 50 mL. Additional mitomycin admixtures were reconstituted with a buffer solution containing monobasic and dibasic sodium phosphate; these were diluted with 5% dextrose injection only. Admixtures were stored at room temperature (27-30 degrees C) and refrigerated temperature (5 degrees C) for 120 days. Mitomycin concentrations in each admixture were tested by high-performance liquid chromatography (HPLC) immediately after admixture and at intervals during storage. Ultraviolet spectra were determined at the same time as HPLC analysis, and the admixtures were visually inspected and tested for pH. Mitomycin concentrations decreased rapidly in the unbuffered admixtures; after 12 hours at room temperature, less than 26% of the drug remained in the dextrose admixture. When the unbuffered admixtures were refrigerated for 12 hours, the mitomycin concentrations decreased 10% in the sodium chloride admixtures and 33% in the dextrose admixtures; after 24 hours, the percentages of drug loss were 23% and 42%, respectively. Mitomycin concentrations in the buffered admixtures showed no substantial decrease during 120 days at 5 degrees C. At room temperature, concentrations decreased 10% after 15 days. When the admixture is buffered to a pH of approximately 7.8, mitomycin is stable in 5% dextrose injection for up to 15 days at room temperature and at least 120 days at 5 degrees C. Unbuffered mitomycin admixtures should not be stored or administered by prolonged i.v. infusion.     

Stability of ranitidine in intravenous admixtures stored frozen, refrigerated, and at room temperature

The stability of ranitidine in concentrations of 0.5, 1.0, and 2.0 mg/mL in admixtures with commonly used i.v. fluids was studied. The admixture vehicles were 0.9% sodium chloride, 5% dextrose, 10% dextrose, 5% dextrose and 0.45% sodium chloride, and 5% dextrose with lactated Ringer's (DLR) injections in polyvinyl chloride bags. Three bags were prepared for each test solution and stored under each of the following conditions: seven days at room temperature (23 +/- 1 degrees C) in normal laboratory lighting, 30 days at 4 degrees C, and 60 days at -20 degrees C followed by either seven days at room temperature (in light) or 14 days at 4 degrees C. Ranitidine content was determined by high-performance liquid chromatography at several intervals. Color, clarity, and pH were also examined. Ranitidine concentrations remained greater than or equal to 90% of initial concentrations under all storage conditions except in the frozen DLR admixtures. Drug loss in the DLR admixtures was greatest at the lower ranitidine concentrations. The only visual changes were yellow color in the thawed DLR admixtures and those containing ranitidine 2.0 mg/mL in 5% dextrose and 0.45% sodium chloride. Slight increases in the pH of some admixtures were noted. Ranitidine is stable for seven days at room temperature and 30 days at 4 degrees C at all concentrations and in all vehicles studied. At the studied concentrations, the drug is stable in admixtures frozen for 60 days and stored for seven days at room temperature or 14 days refrigerated, except in DLR admixtures; these admixtures should not be stored frozen.     

Activity of urokinase diluted in 0.9% sodium chloride injection or 5% dextrose injection and stored in glass or plastic syringes

The effects of the diluent, the container, the i.v. set, and the drug concentration on the adsorption of urokinase to i.v. administration systems were studied, along with the compatibility of urokinase with plastic and glass syringes. Solutions of urokinase 1500 and 5000 IU/mL in 0.9% sodium chloride injection and 5% dextrose injection in glass and polyvinyl chloride (PVC) containers were sampled at 2 and 30 minutes. Administration sets were attached to PVC containers containing the urokinase-5% dextrose injection solutions, and samples were collected at 90 and 150 minutes. Glass and polypropylene syringes containing urokinase 5000 IU/mL in 0.9% sodium chloride injection or 5% dextrose injection were sampled at 0, 4, 8, and 24 hours. Urokinase activity was measured by an in vitro clot lysis assay. No urokinase diluted in 0.9% sodium chloride injection adsorbed to glass or PVC containers. For urokinase 1500 IU/mL in 5% dextrose injection, a loss of 15% to 20% occurred almost instantaneously in PVC containers; additional losses to the infusion sets were minimal. However, for urokinase 5000 IU/mL in 5% dextrose injection, no losses were observed in the PVC systems. No drug loss to glass bottles was seen for urokinase 1500 or 5000 IU/mL in 5% dextrose injection. Urokinase potency remained constant in polypropylene and glass syringes for 24 hours. To minimize urokinase sorption to PVC containers, higher concentrations of urokinase diluted in 5% dextrose injection should be used, provided that clinical safety and efficacy are not compromised. The use of 0.9% sodium chloride injection as a diluent also prevents sorption losses.     

Stability of zidovudine in 5% dextrose injection and 0.9% sodium chloride injection

The stability of zidovudine at a concentration of 4 mg/mL in 5% dextrose injection and 0.9% sodium chloride injection in polyvinyl chloride infusion bags stored at room and refrigerated temperatures for up to eight days was studied. Zidovudine was diluted in 5% dextrose injection and in 0.9% sodium chloride injection to a concentration of 4 mg/mL. Six admixtures were prepared with each diluent; three were stored at room temperature (25 +/- 1 degree C) and three were refrigerated (4 +/- 1 degree C). At 0, 3, 6, 24, 48, 72, and 192 hours, 2-mL aliquots were removed. One milliliter of each aliquot was diluted to a zidovudine concentration of approximately 40 micrograms/mL and assayed in duplicate by a stability-indicating high-performance liquid chromatographic method. Visual inspection was performed at each sampling time for precipitation, turbidity, color change, and gas formation. Sample pH was recorded at 0 and 192 hours. In all admixtures, more than 97% of the initial zidovudine concentration remained throughout the study period. No visual or pH changes were observed. Zidovudine 4 mg/mL in admixtures with 5% dextrose injection or 0.9% sodium chloride injection stored in polyvinyl chloride infusion bags was stable for up to 192 hours (eight days) at room temperature and under refrigeration.     

Compatibility of clindamycin phosphate with cefotaxime sodium or netilmicin sulfate in small-volume admixtures

The stability and compatibility of clindamycin phosphate plus either cefotaxime sodium or netilmicin sulfate in small-volume intravenous admixtures were studied. Admixtures containing each drug alone and two-drug admixtures of clindamycin phosphate plus cefotaxime sodium or netilmicin sulfate were prepared in 100 mL of 5% dextrose injection and 0.9% sodium chloride injection in both glass bottles and polyvinyl chloride (PVC) bags. Final concentrations of clindamycin, cefotaxime, and netilmicin were 9, 20, and 3 mg/mL, respectively. All solutions were prepared in duplicate and stored at room temperature (24 +/- 2 degrees C). Samples were visually inspected, tested for pH, and assayed for antibiotic concentration using stability-indicating assays at 0, 1, 4, 8, 16, and 24 hours for admixtures in glass bottles and at 0, 8, and 24 hours for admixtures in PVC bags. No substantial changes in color, clarity, pH, or drug concentration were observed in any of the solutions. Clindamycin phosphate is compatible with cefotaxime sodium or netilmicin sulfate in 5% dextrose and 0.9% sodium chloride injections in glass bottles or PVC bags for 24 hours.     

Simulated Y-Site Compatibility of Vancomycin and Piperacillin-Tazobactam

Purpose:

To evaluate the physical compatibility of vancomycin with piperacillin-tazobactam during simulated Y-site administration.

Methods:

Vancomycin and piperacillin-tazobactam were tested using 2 different diluents: 0.9% sodium chloride and 5% dextrose for injection. Vancomycin concentrations of 2, 5, and 10 mg/mL were tested using 0.9% sodium chloride and 4 and 8 mg/mL in 5% dextrose. Piperacillin-tazobactam was diluted to 16, 30, 40, 80, and 100 mg/mL, representing common concentrations used clinically in hospitals, and concentrations were tested in both 0.9% sodium chloride and 5% dextrose for injection. Medications were reconstituted under USP <797> aseptic technique. Combinations were tested in duplicate and reverse order with control solutions. Compatibility testing for Y-site included visual inspection, inspection with a high-intensity monodirectional light source (Tyndall beam), turbidimeter for turbidity evaluation, pH, and microscopic viewing. Testing occurred immediately after mixing, 15 minutes, 60 minutes, and 4 hours. If inconsistencies were observed between samples, testing was repeated to confirm results. Solutions were deemed incompatible if any one test failed and compatible if all tests were accepted.

Results:

When dextrose 5% for injection was used as the diluent, vancomycin 4 mg/mL was Y-site compatible with piperacillin-tazobactam 16, 30, and 40 mg/mL and incompatible with 80 and 100 mg/mL. Vancomycin 8 mg/mL was incompatible with all tested concentrations of piperacillin-tazobactam. When 0.9% sodium chloride was used as the diluents, Y-site compatibility was found with vancomycin 2 and 5 mg/mL and all tested concentrations of piperacillin-tazobactam. Vancomycin 10 mg/mL was incompatible with piperacillin-tazobactam 40, 80, and 100 mg/mL. Incompatibilities formed a white precipitate immediately on mixing.

Conclusion:

Y-site incompatibility was greater for the tested concentrations of piperacillin-tazobactam and vancomycin when 5% dextrose was used as the diluent versus 0.9% sodium chloride. Y-site incompatibility was seen immediately in the form of a white precipitate on mixing.     

Effect of freezing and microwave thawing on the stability of six antibiotic admixtures in plastic bags

The stability of six antibiotics in intravenous fluids in polyvinyl chloride containers after freezing and microwave-thawing is reported. Tobramycin sulfate 160 mg, amikacin sulfate 1 g, ticarcillin disodium 3 g, clindamycin phosphate 300 mg, nafcillin sodium 1 g, and ampicillin sodium was also diluted in plastic bags of 0.9% sodium chloride injection 50 ml. For each antibiotic except ampicillin sodium, three bags were prepared and assayed immediately for antibiotic content. Two of the bags were frozen at -20 degrees C for 30 days and then thawed, one by exposure to room-temperature air and the other by microwave radiation. Each was assayed immediately and after 8 and 24 hours storage at room temperature. The third bag was not frozen, but was stored at room temperature and assayed at 8 and 24 hours. Five bags of ampicillin sodium were prepared-three in 0.9% sodium chloride, which were frozen at -20, -30, and -70 degrees C, and two in 5% dextrose, which were frozen at -30 and -70 degrees C. All ampicillin solutions were stored 30 days, assayed, microwave-thawed, and assayed again. All antibiotics except ampicillin retained 90% or more potency when microwave-thawed after storage at -20 degrees C for 30 days, and after subsequent storage at room temperature for 24 hours. Ampicillin sodium was stable in 0.9% sodium chloride when stored at -30 or -70 degrees C, microwave-thawed, and stored up to eight hours at room temperature. Ampicillin sodium was stable in 5% dextrose when stored at -70 degrees C and microwaved-thawed, but its potency declined to 70.5% after eight hours storage at room temperature.     

Stability of intravenous admixtures of doxorubicin and vincristine

The stability of doxorubicin and vincristine in admixtures containing both drugs in 0.9% sodium chloride injection, 0.45% sodium chloride and Ringer's acetate injection, and 0.45% sodium chloride and 2.5% dextrose injection was studied. Doxorubicin hydrochloride was added to 30-mL quantities of each base solution to achieve initial doxorubicin concentrations of 1.40 mg/mL and to 0.9% sodium chloride injection to achieve concentrations of 1.88 and 2.37 mg/mL. Vincristine sulfate was added to each doxorubicin admixture to achieve vincristine concentrations of 0.033 and 0.053 mg/mL. All admixtures were protected from light and stored in polysiloxan bags that are used with portable delivery devices. Admixtures were kept at temperatures of 25, 30, and 37 degrees C. Samples withdrawn immediately after preparation and at 1, 2, 4, 7, 10, and 14 days were analyzed by high-performance liquid chromatography for content of each drug. The stability of doxorubicin was dependent on temperature and composition of the base solution. Analysis of data from the samples containing 0.45% sodium chloride and Ringer's acetate injection showed that doxorubicin concentrations were less than 90% of the initial concentration by 12 hours at 37 degrees C, 35 hours at 30 degrees C, and 62 hours at 25 degrees C, and visual changes occurred in all of these admixtures over the course of the study. Vincristine degradation also was most rapid in 0.45% sodium chloride and Ringer's acetate admixtures. Data analysis showed that concentrations of vincristine were less than 90% of initial after eight days at 25 degrees C, five days at 30 degrees C, and three days at 37 degrees C.(ABSTRACT TRUNCATED AT 250 WORDS)