应用自体耳甲软骨瓣重建眶底

目的研究自体耳甲软骨瓣应用于眶底重建,对眶底骨折引起的复视和眼球内陷的疗效。方法自2003年7月～2007年6月应用耳甲软骨瓣重建眶底共21例。本组患者术前均经轴位和冠状位眶部CT证实存在眶底骨折下陷,且部分眶内容物疝入上颌窦,患侧眼球突出度与健侧相差3mm以上。自患侧耳廓切取耳甲软骨瓣（保留两侧软骨膜）,经下眼睑下缘切口入路,用耳甲软骨瓣修补眶底骨质缺损。术后均随访3个月以上,观察复视和眼球内陷的治疗效果,以及供区耳廓有无畸形。结果本组21例患者术后复视消失者19例（90.5%）、明显改善者2例（9.5%）;双侧眼球突出度相差≤2mm共17例（81.0%）,2.1mm～3.0mm共3例（14.3%）,〉3mm共1例（4.7%）;无一例出现耳廓畸形和耳甲软骨瓣感染。结论对于眶底骨折伴有眶底下陷,眶内容物疝入上颌窦以及双侧眼球突度相差明显的患者,应用耳甲软骨瓣重建眶底,可显著改善复视和眼球内陷等眼功能障碍,且不会引起供区耳廓畸形。     

Treatment of orbital floor blowout fractures with conchal auricular cartilage graft: A report on 14 cases

PURPOSE: We sought to present follow-up on 14 cases in which conchal cartilage graft was used to span small orbital floor defects (up to 2 x 2 cm). MATERIALS AND METHODS: Fourteen patients with orbital floor blowout fractures were included in the study; in 8 cases, there was associated fracture of the inferior orbital rim. The decision to proceed surgically was based on the presence of at least one of the following conditions: diplopia, enophthalmos, herniation of orbital tissues through gaps in the orbital floor bone, and concomitant displacement of bone fragments of the inferior orbital rim. Auricular cartilage was used in all cases. Access to the orbital floor was via subtarsal incision unless a laceration was present and useable. RESULTS: The incidence of clinical signs during follow-up and the surgical complications found (1 case of entropion, 1 case of palpebral edema) are fully comparable with those reported in the literature; they do not appear to be correlated to the use of a cartilage graft. CONCLUSIONS: The use of auricular cartilage has wide application for small orbital floor defects. The conchal graft is easy to harvest. It provides an optimal support function for the globe with minimum donor-site morbidity. A graft of adequate size ensures adequate stability.     

Septal extension graft for correcting short nose in East Asians: review of autologous cartilage grafts and postoperative stability

Septal extension grafts (SEGs) are widely used to correct a short nose in Asians, but few studies to our knowledge have investigated the relationship between different graft materials and the stability of the aesthetic results in East Asians. In this review we discuss the performance of autologous cartilage grafts, with a focus on the critical factors for achieving a stable postoperative nose shape, and propose algorithms for graft material selection in treating Asian patients. Avoiding harvesting septal cartilage grafts and preserving the whole cartilage is helpful for maintaining tip support over the long term. For patients who have loose nasal skin, a cartilage framework with no significant defect, or a mildly short nose, autogenous conchal cartilage is an effective and stable material for primary rhinoplasty. Costal cartilage has good performance and is suitable for treating severe nasal deformities and revision surgery.     

Repair of traumatic inferior orbital wall defects with nasoseptal cartilage

PURPOSE: This study evaluated the effectiveness of nasoseptal cartilage for repairing traumatic orbital floor defects. PATIENTS AND METHODS: Autogenous septal cartilage was used in 20 patients. They were evaluated for the presence or absence of diplopia, enophthalmus, infraorbital nerve paresthesia, and ocular motility disorders. Surgical indications for orbital exploration included entrapment of orbital tissues, large orbital defect (greater than 50% of the orbital floor or more than 8 mm), or orbital floor defects with involvement of other zygomaticofrontal complex fractures. RESULTS: All patients were successfully treated by restoration of the orbital wall continuity. Follow-up at 1 week to 6 months showed 1 patient with postoperative enophthalmos and 1 patient with lower lid edema. There were no donor site and graft infections or graft extrusion. CONCLUSIONS: Nasal septal cartilage is a readily accessible autogenous tissue that should be considered when an autogenous graft is needed for orbital floor defect reconstruction.     

Using three-dimensional nasal forms to compare definitive unilateral cleft lip nose correction with/without a cross-lap joint cartilage graft technique

To compare three-dimensional (3D) nasal forms after definitive correction of unilateral cleft lip (UCL)-nose using an extended spreader cartilage graft with/without a cross-lap joint cartilage graft technique.Twenty-four patients with UCL who underwent definitive nose correction using an extended spreader cartilage graft with a cross-lap joint technique (CLJ group) and fifteen patients with UCL who underwent nose correction without a cross-lap joint technique (non-CLJ group) were enrolled in this study. Pre- and postoperative 3D nasal forms were compared between the two groups.The CLJ group demonstrated more successful recovery of the nasal tip and anterior nasal ridge in the center of the face (P < 0.01), and the higher nasal tip was maintained for more than 1 year (P = 0.008). The differences in the cephalo-caudal heights of the nasal alar groove and curvatures of the alar groove arch were successfully improved in both CLJ and non-CLJ groups. The nasal angles on lateral profiles did not change in either group.An extended spreader cartilage graft with a cross-lap joint technique facilitates satisfactory recovery of the nasal tip in the center of the face and a higher nasal tip, avoiding over-projection in the definitive correction of UCL-nose.     

The need of postoperative radiographs in maxillofacial fractures - A prospective multicentric study

There is still debate about the appropriateness of taking postoperative radiographs in the management of maxillofacial fractures. We did a prospective, multicentre study with predefined inclusion and exclusion criteria involving seven centres with a minimum sample size of 50 patients from each (total n = 431). A standard data sheet was given to operators to record clinical and radiological variables before and after operation. The information obtained was analysed to evaluate the need for routine postoperative radiographs in the management of maxillofacial fractures. Patients were followed up for one month postoperatively. The parasymphyseal (n = 240) was the most commonly encountered fracture site. The orthopantograph was the most commonly used radiograph, being recorded in 421 cases (98%) before, and all 305 cases in which it was recommended after, the operation. Assessment of the reduction after fixation was the most common reason (n = 237, 78%)) for advising postoperative radiographs. Intraoperative reduction and immediate postoperative occlusion were better indicators (p = 0.02 and 0.01) of reduction, fixation, and clinical outcome than immediate postoperative radiographs. The practice of advising postoperative radiographs routinely should be discouraged as it has no significant role in the management of maxillofacial fractures.     

Magnetic resonance imaging for three-dimensional printing of the bony orbit: is clinical use imminent?

The aim of this study was to examine the accuracy of three dimensionally (3D) printed models of the bony orbit derived from magnetic resonance imaging (MRI) for the purpose of preoperative plate bending in the setting of orbital blowout fracture. Retrospective computed tomography (CT) and MRI data from patients with suspected orbital fractures were used. Virtual models were manually generated and analysed for spatial accuracy of the fracture margins. 3D-printed models were produced and orbital fan plates bent by a single operator. The plates were then digitized and analysed for spatial discrepancy using reverse engineering software. Seven orbital blowout fractures were evident in six orbits. Analysis of the virtual models revealed high congruence between blowout fracture margins on CT and MRI (n = 7, average deviation 0.85 mm). Three zygomaticomaxillary complex fractures were seen, for which MRI did not demonstrate the same accuracy. For plates bent to the 3D-printed models of blowout fractures (n = 6), no significant difference was found between those bent to CT versus those bent to MRI when compared for average surface and average border deviation (Wilcoxon signed rank test). Orbital blowout fractures can be defined on MRI with clinically acceptable accuracy. 3D printing of orbital biomodels from MRI for bending reconstructive plates is an acceptable and accurate technique.     

Xenogenic collagen matrix or autologous connective tissue graft as adjunct to coronally advanced flaps for coverage of multiple adjacent gingival recession: Randomized trial assessing non‐inferiority in root coverage and superiority in oral health‐related quality of life

Aim

To evaluate the non‐inferiority of the adjunct of a xenogeneic collagen matrix (CMX) or connective tissue graft (CTG) to coronally advanced flaps (CAF) for coverage of multiple adjacent recessions and compare superiority in patient‐reported outcomes (PROM).

Material and methods

One hundred and eighty‐seven subjects (92 CMX) with 485 recessions in 14 centres were randomized and followed up for 6 months. Patients filled daily diaries for 15 days to monitor patient‐reported experience. The primary outcome was changed in position of the gingival margin. Multilevel analysis used centre, subject and tooth as levels and baseline parameters as covariates.

Results

Average baseline recession was 2.5 ± 1.0 mm. The surgery was 15.7 min shorter (95%CI from 11.9 to 19.6, p < .0001) and perceived lighter (11.9 VAS units, 95%CI from 4.6 to 19.1, p = .0014) in CMX subjects. Time to recovery was 1.8 days shorter in CMX. Six‐month root coverage was 1.7 ± 1.1 mm for CMX and 2.1 ± 1.0 mm for CTG (difference of 0.44 mm, 95%CI from 0.25 to 0.63 mm). The upper limit of the confidence interval was over the non‐inferiority margin of 0.25 mm. Odds of complete root coverage were significantly higher for CTG (OR = 4.0, 95% CI 1.8–8.8).

Conclusion

Replacing CTG with CMX shortens time to recovery and decreases morbidity, but the tested generation of devices is probably inferior to autologous CTG in terms of root coverage. Significant variability in PROMs was observed among centres.     

Effect of primary correction of nasal septal deformity in complete unilateral cleft lip and palate on the craniofacial morphology

PurposeTo assess the long-term effect of primary correction of the nasal septum during lip repair in unilateral complete cleft lip and palate on the craniofacial morphology.Material, subjects, methodsThe study material consisted of 54 lateral cephalograms made at the ages 7–22, including 28 cephalograms of patients from a study group (aged 7–14 years) after a primary correction of the nasal septum during lip closure and 26 cephalograms of patients from a control group (aged 12–22 years) operated on without septal correction. All cephalograms have been analysed with regard to skeletal, dental and soft-tissue relationships. Data distribution has been checked using Shapiro–Wilk test (α = 0.05). Student t-test was used to compare values of normal distribution and for the latter – Mann–Whitney test.ResultsThe comparison of all cephalometric values between the study and control groups revealed a statistically significant (α = 0.05) difference only for H (p = 0.0267), 1+: NB angle (p = 0.0175) and 1+: NA (mm) (p = 0.0249). Each of the three cephalometric measurements mentioned were greater in the study than in the control group.ConclusionNo negative effect from the primary nasal septum correction on maxillary development could be found in the study group.     

3D photogrammetric analysis in hump nose correction based on nasal tip projection without dorsal augmentation in Asian rhinoplasty

IntroductionHump nose in Asians should be managed differently in consideration of the lateral profile and the balance between the dorsal height and nasal tip projection. We suggest an alternative approach comprising mild rasping and nasal tip projection using a septal extension graft.Material and methodsIn this retrospective study, patients who underwent hump nose correction with rhinoplasty between March 2012 and July 2015 were recruited. Instead of applying conventional dorsal augmentation after humpectomy, our approach involved only smooth dorsal contouring in limited cases. 15 patients were evaluated, with surgical outcomes demonstrated using three-dimensional photogrammetry.ResultsOver the postoperative period, hump height decreased (pre 2.77 ± 2.07, post 0.31 ± 0.55, p = 0.001). Regarding the efficacy of tip projection, both nasal tip protrusion (pre 17.64 ± 4.82, post 20.46 ± 4.05, p = 0.001) and tip projection (pre 19.75 ± 4.26, post 21.83 ± 4.17, p = 0.023) were increased. The hump nose reduction ratio was 84.94% after 6 months and 76.47% after 1 year, whereas increases in nasal tip projection and dorsal augmentation were minimal, with ratios of 14.75% and 12.76%, respectively, after 6 months).ConclusionTherefore, creating a balance between the nasal tip and nasal dorsum in hump nose correction is more important than dorsal augmentation after hump resection in Asians.     

Long-term result of a biodegradable osteo-inductive copolymer for the treatment of orbital blowout fracture

PurposeWe have recently reconstructed the orbital wall using a bioabsorbable osteo-inductive copolymer as a support material for the bone defects in patients with orbital blowout fracture. The purpose of this study was to investigate a 2-year follow-up after implantation.Material and methodsIn order to investigate the efficacy and safety of the bioabsorbable osteo-inductive copolymer HA-P(LA/CL), hydroxyapatite-poly(l-lactide-ε-caprolactone), we measured CT density of the implanted copolymers in 7 patients at such time points as 1 week, 6 months and 2 years after surgery along with the long-term outcomes with regard to postoperative complications.ResultsFive patients in whom the intraoperative maximum width of the bone defect was less than 15 mm demonstrated the fracture types of either linear or trap-door. All patients treated with HA-P(LA/CL) copolymer indicated good bone formation with high CT density (>500) at 2 years postoperatively. In contrast, 2 patients in whom the intraoperative maximum width of the bone defect was more than 16 mm demonstrated a punched-out type fracture. Postoperative CT of the HA-P(LA/CL) copolymer showed low density (28.0 and 173.4) at 2 years postoperatively, indicative of limited bone formation. None of the cases demonstrated significant postoperative complications such as diplopia, enophthalmos, infection and extrusion of the implant material.ConclusionThe results of this study demonstrate that surgical treatment of orbital blowout fractures using bioabsorbable osteo-inductive copolymer was useful in linear and trap-door fractures.     

Effectiveness of a nasoseptal cartilaginous graft for repairing traumatic fractures of the inferior orbital wall

The goals of reconstruction after an orbital fracture are to restore the continuity of the floor, provide support for the orbital contents, and prevent fibrosis of the soft tissues. Nasoseptal cartilage is an easily accessible, abundant, and autogenous source that supports the orbital floor and gives minimal donor site morbidity. We evaluated the effectiveness of nasoseptal cartilage for repairing traumatic defects of the orbital floor. Autogenous nasoseptal cartilage was used in 20 patients. Presence or absence of diplopia, enophthalmos, paraesthesia of the infraorbital nerve, dystopia, range of covering of the defect by nasoseptal cartilage, complications at the recipient and donor sites, resorption of the graft, and ocular mobility disorders were recorded. Entrapment of orbital tissues, a large orbital defect (more than 50% of orbital floor or more than 8mm), or defects of the orbital floor with involvement of other fractures of the zygomaticofrontal complex are indications for exploration of the orbit. In one case after 24 months, the surgical field was explored for direct evaluation of the efficacy of the graft. All patients were treated successfully by restoration of the continuity of the orbital floor. Six months to 2 years follow up showed only one patient with postoperative enophthalmos. There was no donor site morbidity, and no grafts became infected or extruded. The nasoseptal graft was completely covered with underlying tissue. Nasoseptal cartilage is readily accessible autogenous tissue that should be considered when an autogenous graft is needed for reconstruction of a defect of the orbital floor.     

Effects of local infiltration of insulin around titanium implants in diabetic rats

In patients with type 2 diabetes mellitus (DM) there is poorer quality osseointegration than in other patients, and the success of oral implants is less. The aim of the present study was to investigate the influence of local infiltration of insulin at the implant–bone interface after implantation in diabetic rats. We used GK rats (8-week-old Goto-Kakizaki Wistar rats, n = 20) in a newly established model of type 2 DM, and Sprague–Dawley rats were used as controls (n = 10). GK rats were divided into two groups: those with DM alone and those with DM given insulin (INS) (n = 10 in each group). The INS group was given controlled-release insulin at the implant–bone interface. Rats were killed at 2 and 6 weeks after implantation. We evaluated bone–implant contact and bony volume in all rats. Implant–bone contact, osteoid and osteogenic volume, and the amount of newly formed bone in the DM group were significantly less than in the control (p < 0.05) and INS (p < 0.01) groups. Implant–bone contact in the INS group was less than that in the control group, but the amount of newly formed bone was greater. In conclusion, we suggest that although the implant–bone contact in the INS group did not reach the control level, direct infiltration of insulin could improve implant–bone contact. Local infiltration of insulin at the implant–bone interface may have important clinical implications by naturally improving the success of oral implantation in diabetic rats.     

Resistance of the sheep skull after a monocortical cranial graft harvest

IntroductionCranial bone grafts are commonly used for preimplant or facial reconstructive surgery. However, removing bone may weaken the parietal bone and lead to a loss of strength. This loss has never been quantified. Bone harvest site reconstruction is being carried out more frequently than in the past, but its effect on the strength of the donor site is unknown.The aim of our study is to quantify the loss of strength due to a monocortical cranial bone graft harvest in sheep.Materials and methodsThirty-four fresh sheep cadaver heads were used for the study. We performed a monocortical bone graft harvest on the posterior part of the right frontal bone. We used a surgical navigation system with optoelectronic tracking to measure bone thickness.To evaluate the resistance of the skull to an impact we developed a pendulum Charpy impact testing machine. The impact force hit a defined target frontal area.ResultsThe total thickness on both sides ranged from 3 mm to 10 mm with a mean of 6 mm (SD = 1.4 mm).The loss of strength between the intact left side and the harvested right side varied with a mean of 49% (SD = 17%) and was significant (p = 6.10^?10).ConclusionThis study has demonstrated that there is a loss of strength in the skull on the side where a bone graft has been harvested.Reconstruction of the harvested site using biomaterials reduces the poor aesthetic outcome due to depression at the site, but we do not know its effects on strength. This kind of study cannot be performed in humans for ethical reasons.Data obtained from this study will allow us to carry out a study in sheep to evaluate strength of the frontal area of a skull with a harvest site reconstructed with hydroxyapatite cement.     

Prevalence and severity of orbital blowout fractures

We aimed to study the prevalence of orbital blowout fractures and evaluate the causes and the location of orbital cavity fractures. In this cross-sectional study, the medical records of all patients admitted with facial trauma were assessed, sociodemographic information as well as the aetiology of trauma extracted, and the computed tomographic images of the patients were reassessed. Location of orbital blowout fractures and the severity of orbital fractures were evaluated. A total of 203 cases had blowout fractures (175 male and 28 female patients with a mean (SD) age of 36 (16) years. Road traffic accidents (n = 139, 69%) were the most common cause of orbital blowout fractures. Falls (n=29, 14%) and assault (n=20, 10%) were the other causes of trauma to the orbital structure, which resulted in blowout fractures. The medial wall was the most commonly involved location (n=81, 40%) followed by orbital floor (n=64, 32%), the combination of medial wall and floor (n=36, 18%), medial wall and maxilloethmoidal strut combination (n=13, 6%), and all the three locations altogether (n=9, 4%). Most of the blow-out fractures had mild severity (n=107, 53%). There was a significant relation between the severity and location of the blowout fractures (p < 0.001).     

Radiographic volumetric risk factors for late enophthalmos prediction in orbital blow-out fractures: A retrospective study

The aim of this study was to assess the correlation between volumetric risk factors, orbital volume (OV), orbital volume ratio (OVR), herniated volume (HV), and the newly described herniated volume ratio (HVR), with the occurrence of late enophthalmos.Patients presenting a unilateral unoperated blow-out fracture were retrospectively included. OV and HV were measured using planimetry on the initial CT scan images. OVR and HVR were then calculated. Enophthalmos was measured on the 2-month follow-up CT scan images. The population was divided into two groups according to their enophthalmos status. Correlations and multiple linear regression model were used.17 patients out of 45 presented a late enophthalmos of 1 mm or more. There were significantly higher OVR (107 (3.76); p < 0.0001), HV (0.8 (0.47); p < 0.0001) and HVR (3.3 (1.82); p < 0.0001) in the enophthalmos group. A very strong linear correlation between enophthalmos and OVR (r_s = 0.806), HV (r_s = 0.948) and HVR (r_s = 0.951) was found.Enophthalmos prediction using these volumetric parameters can help the surgeon's decision-making in orbital blow-out fractures in order to prevent late enophthalmos. Measurement is simple and reproducible. However, larger prospective studies are needed to confirm these results.     

Oncological and aesthetic outcome following surgical management of orbito-palpebral skin cancers: A retrospective study of 132 patients

BackgroundThe incidence of facial skin cancers continues to rise, with major studies on their impacts still lacking in the literature. This study reports on the oncological and aesthetic results following surgical management of an orbito-palpebral skin cancer.MethodsThis retrospective, monocentric study included patients treated for a non-melanoma skin cancer of the eyelid and orbit. Risk factors, location, histological type, invaded or insufficient margins, healing time, surgical management by excision and direct closure, skin graft or local flaps, self-evaluated aesthetics, and quality of life results were all compared.ResultsThe study included 132 patients operated for basal cell carcinoma (71.9%), squamous cell carcinoma (22.9%), or for another type (5.2%) between November 2011 and January 2017. Average tumor size was 9.6 ± 6.3 mm. Surgical management resulted in excision and open healing (9.1%), excision and direct closure (3.9%), skin graft (31.1%), local flap (21.9%), or another type of reconstruction (3.0%). Significant links between invaded or insufficient margins and basal cell type (OR = 3.37, p = 0.014), tumor size over 7 mm (OR = 2.7, p = 0.011), double location (OR = 8.44, p = 0.04), flap-based reconstruction (OR = 0.290, p = 0.02), and female gender (OR = 0.418, p = 0.034) were reported throughout our multivariate analysis.ConclusionsThis study brings out consequential information on factors linked with invaded or insufficient excision margins. Larger cohorts should evaluate the aesthetic outcomes in such a population.     

Comparative radiopacity of bone graft materials

The aim of this study was to investigate the radiopacity of bone graft materials (BGMs) in comparison with bovine mandibular cortical bone and human dentine. Eight samples of each material (8 mm in diameter and 3 mm in thickness) were prepared from Dexabone^® (DB), Bio - Oss^® (BO), 4BONE SBS (4B), KASIOS^® TCP (KA), S.C. PONETI (PO), and Apatite-Wollastonite (AW). The optical densities of each material, along with one tooth section (human canine tooth 1 mm slice), bovine mandibular cortical bone (BC) samples, and an aluminum step wedge, were measured from radiographic images using a transmission densitometer. The data were analyzed by nonparametric one-way ANOVA (Kruskal-Wallis) and Duncan’s multiple range tests for post hoc comparison (α = 0.05). BC and AW had statistically lower optical density values than BO, 4B and human dentine (p < 0.05). Among BGMs, AW (3.681 ± 0.409 mm eq Al) had the highest radiopacity values whereas BO (1.925 ± 0.176 mm eq Al) had the lowest one. The radiopacity values of DB and KA did not reveal a statistically significant difference when compared with other materials (p > 0.05). The radiopacity of all BGMs investigated seemed to be too low to be detected radiographically when placed in the mandibular cortical bone.     

Reconstruction of saddle nose deformity with three-dimensional costal cartilage graft

Saddle nose deformity is characterized by depression of the nasal bone and the cartilage dorsum associated with a collapse in the upper lateral and alar cartilages. Etiopathogenesis usually involves trauma or invasive excision of the bone and cartilage. Surgical treatment for functional and aesthetic recovery relies on the use of grafts. Options for grafting include autogenous tissue such as bone or cartilage and alloplastic augmentation. Nine patients with saddle nose deformity underwent surgical reconstruction with autogenous costal cartilage. The deformity was the result of trauma in seven patients and secondary to surgery in two patients. Cartilage obtained from the sixth and seventh ribs was used as the graft material to compensate for the low nasal dorsum. Cartilage was used as a single unit and shaped to cover the nasal dorsum and the lateral nasal walls completely. The upper lateral cartilages were fixed to shaped cartilage graft. Additional cartilage grafts into the columella and septum were also placed in all patients. Functional and aesthetic outcome was satisfactory in all patients. As a result, using costal cartilage graft, a single unit allowed more predictable and reliable reconstruction of the saddle nose deformity than the conventional dorsal grafts.     

Comparison of temporomandibular joint function and morphology after surgical and non-surgical treatment in adult condylar head fractures

PurposeThe aim of this study was to evaluate whether surgical treatment can distinctly improve temporomandibular joint (TMJ) function and morphology in adult patients with condylar head fractures (CHFs) when compared with conservative treatment.Patients and methodsA retrospective study was performed to evaluate surgical and conservative outcomes in all patients who had suffered CHFs. In this study, all patients were divided into a surgical group and a conservative group. In the surgical group patients were treated by open reduction and internal fixation (ORIF) combined disc anchorage, while in the conservative group patients were treated by a removable splint combined with intermaxillary elastics. Clinical and radiological outcomes were evaluated and functional outcomes were assessed using the Helkimo index score. Paired t-tests, Wilcoxon signed rank tests, independent t-tests and χ² tests were used to assess inter-group differences.Results75 TMJs in 56 patients were included in this study and were divided into a surgical group (56 TMJs in 40 patients) and a conservative group (19 TMJs in 16 patients). The results showed that the Helkimo index score for TMJ in the surgical group was better than in the conservative group (p_Ai = 0.032, p_Di = 0.001, respectively). Ramus height in the surgical group (61.08 ± 4.04 mm) recovered more than in the conservative group (54.82 ± 3.06 mm) (p = 0.012). Discs became shorter, moved further forward, and became severely distorted in the conservative group (disc length = 7.32 ± 1.35 mm). In contrast, discs became longer, retained a normal disc–condyle relationship, and formed a normal shape in the surgical group (disc length = 11.05 ± 2.07 mm) (p = 0.003). According to the MRI images, joint effusion, retrodiscal tear, and lateral capsular tear were better cured in the surgical group (p = 0.001, p < 0.001, p = 0.012, respectively).ConclusionBased on these results, it seems that surgical treatment of condylar head fractures should be the preferred approach if there are no contraindications for general anesthesia.