共查询到20条相似文献，搜索用时 31 毫秒
1.
Scott M. Eskildsen Zenus J. Wilson David C. McNabb Christopher W. Olcott Daniel J. Del Gaizo 《The Journal of arthroplasty》2017,32(11):3474-3479
Background
In the setting of acetabular deficiency during total hip arthroplasty (THA), the medial protrusio technique (MPT) allows for increased component coverage while avoiding excessive component abduction or elevation of the hip center. The technique involves controlled reaming through the medial acetabular wall while maintaining the continuity of the anterior and posterior columns. The purpose of this study is to analyze the results of the largest reported series to date of primary and revision THAs using the MPT.Methods
A retrospective review of THAs performed by a single surgeon from July 2004 to July 2010 identified 102 patients who underwent THA necessitating the use of the MPT (primary 86 and revision 16), with at least 2 years follow-up.Results
This study reports the largest series to date of primary and revision THAs using the MPT for acetabular deficiency. Postoperatively, mean Harris hip score was 86 (range 31-96). There was no correlation with degree of medialization and change in Harris hip score (P = .12). At mean follow-up of 41.1 months (range 24-92 months), there were no intrapelvic structure injuries and no acetabular components required revision. The MPT provided a safe and effective method for addressing acetabular deficiency and avoiding component malposition.Conclusion
The MPT provided a safe and effective method for addressing acetabular deficiency in this large series of patients. The technique was successful at improving component coverage while maintaining an anatomic hip center and avoiding excessive component abduction. Fixation remained durable with no cases of loosening at final follow-up. 相似文献2.
Gulraj S. Matharu Andrew Judge David W. Murray Hemant G. Pandit 《The Journal of arthroplasty》2018,33(2):447-452
Background
Trabecular metal (TM)-coated acetabular components are increasingly used in both primary and revision total hip arthroplasty (THA). However, previous studies assessing TM acetabular components have been small single-center cohorts with most lacking a control group. We compared revision rates following primary THA between TM and non-TM-coated acetabular components.Methods
A retrospective observational study was performed using National Joint Registry data, which included primary THAs with the same cementless acetabular component (either TM or non-TM coated). TM and non-TM implants were matched for multiple potential confounding factors using propensity scores. Outcomes following primary THA (revision for all-cause acetabular indications, aseptic acetabular loosening, and infection) were compared between matched groups using competing risk regression analysis.Results
In 18,200 primary THAs (9100 TM and 9100 non-TM), the overall prevalence of acetabular revision, revision for aseptic acetabular loosening, and septic revision was 1.2%, 0.13%, and 0.59% respectively. Five-year revision rates for all-causes (1.0% vs 1.8%, sub-hazard ratio [SHR] 0.57, 95% confidence interval [CI] 0.43-0.76, P < .001), aseptic acetabular loosening (0.1% vs 0.2%, SHR 0.35, 95% CI 0.14-0.90, P = .029), and infection (0.5% vs 0.9%, SHR 0.51, 95% CI 0.34-0.76, P = .001) were all lower in TM compared with non-TM implants.Conclusion
Following primary THA, TM-coated acetabular implants had a reduced risk of both aseptic and septic revision compared with non-TM implants. Although absolute differences in revision risk were small, they may be clinically significant if TM designs were implanted in more complex cases. 相似文献3.
Xigong Li Yang Lu Junying Sun Xiangjin Lin Tiansi Tang 《The Journal of arthroplasty》2017,32(2):475-479
Background
The purpose of this study was to evaluate the functional and radiographic results of patients with Crowe type-IV hip dysplasia treated by cementless total hip arthroplasty and double chevron subtrochanteric osteotomy.Methods
From January 2000 to February 2006, cementless total hip arthroplasty with a double chevron subtrochanteric shortening osteotomy was performed on 18 patients (22 hips) with Crowe type-IV dysplasia. The acetabular cup was placed in the position of the anatomic hip center, and subtrochanteric femoral shortening osteotomy was performed with the use of a double chevron design. The clinical and radiographic outcomes were reviewed with a mean follow-up of 6.5 years (5-10 years).Results
The mean amount of femoral subtrochanteric shortening was 38 mm (25-60 mm). All osteotomy sites were healed by 3-6 months without complications. The mean Harris Hip Score improved significantly from 47 points (35-65 points) preoperatively to 88 points (75-97 points) at the final follow-up. The Trendelenburg sign was corrected from a positive preoperative status to a negative postoperative status in 12 of 22 hips. No acetabular and femoral components have loosened or required revision during the period of follow-up.Conclusion
Cementless total hip arthroplasty using double chevron subtrochanteric osteotomy allowed for restoration of anatomic hip center with safely functional limb lengthening, achieved correction of preoperative limp, and good functional and radiographic outcomes for 22 Crowe type-IV dislocation hips at the time of the 5- to 10-year follow-up. 相似文献4.
Bo Liu Yu-Hang Gao Lu Ding Shu-Qiang Li Jian-Guo Liu Xin Qi 《The Journal of arthroplasty》2018,33(3):915-918
Background
We evaluated acetabular cup coverage (CC) and rim contact (RC) to evaluate the bone stock above the acetabulum for guiding acetabular component placement using the high hip center technique in patients with Crowe type III developmental dysplasia of the hip.Methods
Using hip computed tomography and image processing software, pelvises were reconstructed digitally in 20 hips with Crowe type III developmental dysplasia of the hip. Mimicked cup was placed with anteversion angles of 0° (group I), 5° (group II), and 10° (group III) respectively. In each group, the cup was placed at the anatomical hip center at first, and then the cup was moved up to 40 mm vertically about the native rotation center with an increment of 2.5 mm at each step. CC and RC were calculated and documented with each movement.Results
CC was 65.87%, 67.77%, and 68.98% for group I, group II, and group III at the native rotation center, and increased progressively to 86.45%, 85.85%, and 84.71% at 25 mm above. RC was 49.17%, 50.25%, and 51.92% for group I, group II, and group III at the native rotation center, and increased progressively to 86.87%, 86.39%, and 84.94% at 22.5 mm above. CC and RC were positively correlated, despite the different anteversion angles (r = 0.687 at 0°, 0.683 at 5°, and 0.645 at 10°; P < .001).Conclusion
Computed tomography analysis and computer stimulation demonstrate that it is feasible to use high hip center technique in Crowe type III hips. 相似文献5.
Anita Sadhu Denis Nam Benjamin R. Coobs Toby N. Barrack Ryan M. Nunley Robert L. Barrack 《The Journal of arthroplasty》2017,32(3):987-991
Background
Recently, the importance of acetabular component positioning in the Lewinnek “safe zone” in preventing prosthetic dislocation following total hip arthroplasty (THA) has been questioned. The purpose of this study was to determine the proportion of acetabular components within the Lewinnek safe zone between primary and revision THAs that have sustained a dislocation vs matched controls without a dislocation event.Methods
This was a retrospective, institutional review board–approved investigation of THAs performed at our institution or referred to our institution between 1997 and 2013. Ninety-six primary THAs and 60 revision THAs that sustained a dislocation were included and matched 1:1 based on age, gender, and body mass index with nondislocated controls. Acetabular component inclination and anteversion were performed using Martell Hip Analysis Suite and compared between the 2 cohorts for both primary and revision THAs.Results
The proportion of acetabular components within the safe zone for both inclination and anteversion was 23 of 96 (24%) in primary THA dislocators vs 48 of 96 (50%, P < .001) in controls. The proportion of acetabular components within the safe zone for both inclination and anteversion was 28 of 60 (47%) in revision THA dislocators vs 40 of 60 (66%, P = .03) in controls.Conclusion
Patients sustaining a dislocation following a primary or revision THA had acetabular components less frequently positioned within the safe zone compared to control patients. This study suggests acetabular component positioning remains an important variable in decreasing the risk of dislocation following primary and revision THA. 相似文献6.
Olivier Freddy Hitz Xavier Flecher Sébastien Parratte Matthieu Ollivier Jean-Noël Argenson 《The Journal of arthroplasty》2018,33(7):2197-2202
Background
Options for total hip arthroplasty (THA) in high dislocated hips include subtrochanteric osteotomy (STO), high hip center positioning, and 2-stage surgery with progressive lowering using an external fixator before THA. We described the long-term results of 1-stage THA performed without STO, using a cementless customized stem associated if necessary with sequential tenotomies and/or greater trochanteric osteotomy.Methods
Ninety-eight consecutive THA without STO were performed using this technique. Of those 98 hips, 26 hips with high dislocation (12 class III and 14 class IV according to the Crowe classification) were evaluated at an average follow-up of 16 (10-22) years.Results
At the time of last follow-up, the mean Harris Hip Score was 86 points (37-100). The mean leg-length discrepancy was 7 ± 5 mm (0-17). Two transient (7.7%) nerve palsies (1 sciatic and 1 femoral) were notified. A revision was required for 6 hips (23.1%). Kaplan-Meier survivorship analysis at 15 years regarding aseptic loosening of the femoral component was 87.5% (95% confidence interval, 76.5-99.1). During the same period, acetabular implant survivorship free from revision for aseptic loosening was 96.1% (95% confidence interval, 92.7-99.9).Conclusion
The combination of intramedullary fit and extramedullary adaptation for offset and anteversion provided by the custom stem can avoid additional procedures associated to THA in high developmental dysplasia of the hip. The clinical function and long-term survival reported in this series is encouraging for THA performed in case of high hip dislocation. 相似文献7.
Background
Patients with destructive acetabular lesions are at high risk for morbidity. Harrington described reinforcing acetabular diseased bone with methylmethacrylate, supplemented by metal fixation, to allow total hip reconstruction. However, all published studies using this technique report dislocations. We believe that initial use of constrained liners would help alleviate dislocation risk, without increasing component loosening or polyethylene wear.Methods
Sixty-eight patients who underwent Harrington hip arthroplasties for metastatic cancer from August 2005 to March 2015 were identified. All patients had a constrained acetabular liner implanted during their index procedure. Electronic medical records and radiographs were reviewed. A literature review of studies with similar technique was used as a historical control.Results
Forty-seven patients (69.2%) died 22.7 ± 22.7 months after surgery, at age 62.4 ± 17.2 years. At an average clinical follow-up of 9.9 ± 14.2 months (range 2-50 months), we found no incidents of dislocation. No patients had component failure requiring revision or evidence of loosening on x-ray. Thirteen papers, comprising 185 patients, demonstrated 39 patients (21.1%) with dislocations and 13 patients (7.0%) requiring revision surgery for aseptic loosening.Conclusion
Modified Harrington technique has demonstrated relative durability when reconstructing metastatic acetabular disease, although dislocation occurs in approximately 20% of patients. This study demonstrates that initial use of a constrained liner can alleviate postoperative dislocations without increasing risk of perioperative complications. Even modest reduction in complications during the limited lifespan of oncologic patients can have dramatic positive effects on quality of life. 相似文献8.
Ting-Xian Ling Jin-Long Li Kai Zhou Qiang Xiao Fu-Xing Pei Zong-Ke Zhou 《The Journal of arthroplasty》2018,33(2):453-459
Background
Given the lack of studies of acetabular defect reconstruction in primary total hip arthroplasty (THA) using tantalum augments, this study aims to evaluate clinical and radiographic results for treatment with tantalum augments to reconstruct acetabular defects in primary THA.Methods
We retrospectively reviewed 19 patients (19 hips) with acetabular defects who underwent primary THA using tantalum augments, with a minimum follow-up of 2 years. Clinical, radiographic, and surgical data were retrospectively evaluated.Results
Mean follow-up was 5.1 years (range 2.5-7.6). Harris Hip Score improved from 35.8 (range 19-56) preoperatively to 85.3 (63-98) at last follow-up (P < .01). Oxford Hip Score, University of California Los Angeles activity scale, and Short Form-12 score also improved significantly from presurgery to last follow-up. Mean operation time and blood loss were 124.7 minutes and 530 mL, respectively. Mean hip center position was 2.97 cm (range 2.35-3.58) horizontally and 2.06 cm (1.29-2.92) vertically, and mean acetabular inclination was 38.9° (range 27°-47°) at last follow-up. These parameters were not significantly different from those recorded immediately postoperatively (P > .05). There was no aseptic loosening, cup and augment migration, screw breakage, or presence of hip infection at last follow-up. All hips were radiographically stable.Conclusion
Porous tantalum augments combined with titanium shells lead to satisfactory clinical and radiographic outcomes for the reconstruction of acetabular defect in primary THA at a mean 5.1 years of follow-up. This approach confers anatomical cup placement, simple operation, and a high rate of stable fixation. 相似文献9.
James W. Pritchett 《The Journal of arthroplasty》2018,33(11):3508-3513
Background
Hip dysplasia is the leading cause of hip arthritis in young adults. These patients often participate in active lifestyles that require a full and stable range of motion.Methods
Between 2001 and 2011, 232 consecutive polyethylene resurfacing arthroplasties were performed in 201 patients with advanced arthritis from severe acetabular insufficiency due to dysplasia. All patients had Crowe II or III disease. Their mean age at surgery was 43 years. A 2-piece cementless acetabular resurfacing shell with dome screws and a highly cross-linked polyethylene liner were implanted to provide secure fixation, early weight bearing, and a stable hip. Additional structural bone grafts and/or fixation were not used. A cemented or cementless resurfacing prosthesis was used on the femur.Results
During a mean follow-up of 10 years, 8 hips (3.5%) were converted to a total hip arthroplasty due to acetabular loosening (1), femoral neck fracture (2), femoral osteonecrosis (2), infection (2), or persistent pain (1), resulting in a mean survival of the resurfacing prostheses of 96% (95% confidence interval 89-98). There were no pending revisions and no dislocations. At 2 years postoperative, Harris Hip Scores improved from a preoperative mean of 55 to 97 and University of California Los Angeles activity scores improved from 5 to 8.Conclusion
Hip resurfacing using a 2-piece polyethylene acetabular component for advanced dysplasia has resulted in excellent function and implant survivorship with a low rate of complications at mid-term follow-up. 相似文献10.
Jiawei Xu Xinhua Qu Huiwu Li Yuanqing Mao Degang Yu Zhenan Zhu 《The Journal of arthroplasty》2017,32(4):1374-1380
Background
Recommendations for minimum cup coverage based on anteroposterior radiographs are widely used as an intraoperative guide in total hip arthroplasty for patients with developmental dysplasia of the hip. The purpose of this study was to examine the validity of two-dimensional (2D) measurement of coverage with three-dimensional (3D) coverage and to identify parameters for determining the 3D coverage during surgery.Methods
We developed a technique to accurately reproduce the intraoperative anatomic geometry of the dysplastic acetabulum and measure the 3D cup coverage postoperatively. With this technique, we retrospectively analyzed the difference and correlation between 2D and 3D measurements of native bone coverage in 35 patients (45 hips) with Crowe II or III DDH. Linear regression analysis was performed to examine the intraoperative parameters related to coverage. The mean follow-up period was 7.64 years (range, 6.1-9.5 years).Results
There was a significant difference and a fair correlation between 2D and 3D measurements. The 2D measurement underestimated the 3D cup coverage by approximately 13%. An excellent linear relationship was noted between the 3D coverage/uncoverage and the height of the uncovered portion (R2 = 0.8440, P < .0001). There was no case of loosening or revision during the follow-up.Conclusion
Current minimum cup coverage recommendations based on 2D radiograph measurements should not be used as a direct intraoperative guide. The height of the uncovered portion is a useful parameter to determine the 3D coverage during surgery. 相似文献11.
Ashok S. Gavaskar Hitesh Gopalan Bhupesh Karthik Parthasarathy Srinivasan Naveen C. Tummala 《The Journal of arthroplasty》2017,32(3):872-876
Background
Total hip arthroplasty (THA) provides a successful salvage option for failed acetabular fractures. The complexity of arthroplasty for a failed acetabular fracture will depend on the fracture pattern and the initial management of the fracture. Our objective was to compare the midterm outcome of THA between patients who presented with failed acetabular fractures following initial surgical or nonsurgical treatment.Methods
Forty-seven patients underwent cementless THA ± acetabular reconstruction following failed treatment of acetabular fractures. Twenty-seven were initially treated by surgery (group A) and 20 had nonsurgical treatment (group B). Intraoperative measures, preoperative and follow-up clinical, radiological, and functional outcomes were compared between the 2 groups.Results
The mean surgical time, blood loss, and need for blood transfusion were significantly less in group A (P < .05). Acetabular reconstruction to address cavitary or segmental defects was needed in a significantly higher number of patients in group B (P = .006). Significant improvement in modified Merle d'Aubigne and Oxford scores was seen postsurgery in both groups. Acetabular component survival with aseptic loosening as end point was 98%. Overall survival rate with infection, revision, or loosening as end point was 93% at a mean follow-up of 7 years ± 17 months.Conclusion
THA for a failed acetabular fracture is greatly facilitated by initial surgical treatment. Although functional results and survivorship were similar in both groups, failed nonsurgical treatment in complex fractures is associated with migrated femoral head and extensive acetabular defects requiring complex acetabular reconstruction. 相似文献12.
Kensuke Yoshino Tadashi Tsukeoka Yoshikazu Tsuneizumi Tae Hyun Lee Junichi Nakamura Masahiko Suzuki Seiji Ohtori 《The Journal of arthroplasty》2017,32(11):3495-3501
Background
Bone deficiency in revision total hip arthroplasty is a surgical challenge. The Murata-Chiba cup supporter (MC support ring) is an acetabular component supporter for a cementless porous-coated cup. The purpose of this study is to examine the clinical and radiographic outcomes of reconstruction of acetabular bone deficiency using iliac autografts supported by an MC support ring in a revision setting with minimum 15-year follow-up.Methods
Fifty-nine consecutive revision total hip arthroplasties (57 patients) using the MC support ring were followed for a minimum of 15 years. Nine hips had American Academy of Orthopaedic Surgeons type II deficiency and 24 had type III defects of the acetabulum. Clinical outcomes were evaluated using the Harris hip score. Radiographic evaluation included assessment for loosening and bone graft incorporation. Kaplan-Meier survival analysis was performed.Results
At a minimum 15-year follow-up (mean, 17.6 years), 32 patients (33 hips) were alive, 17 patients (18 hips) were deceased, and 8 patients (8 hips) were lost to follow-up. The mean Harris hip score improved from 44.3 to 77.2 at final follow-up. Four hips required reoperation due to deep infection (2 hips) and liner dissociation (2 hips), but no acetabular components were revised for aseptic loosening. Incorporation of the bone graft occurred in all cases. One unrevised patient had radiographic failure. Survivorship at 15 years with re-revision or radiographic failure as the end point was 90.6% (95% confidence interval, 83.0%-98.8%).Conclusion
The reconstruction of acetabular bone deficiency using autografts supported by an MC support ring provided satisfactory clinical and radiological results at 17.6 years postoperatively. 相似文献13.
Duan Wang Ling-Li Li Hao-Yang Wang Fu-Xing Pei Zong-Ke Zhou 《The Journal of arthroplasty》2017,32(4):1211-1219
Background
When surgeons reconstruct hips with a high dislocation related to severe developmental dysplasia of the hip (DDH) in total hip arthroplasty (THA), archiving long-term stable implant fixation and improving patient function and satisfaction remain challenging. The purpose of this study was to evaluate the 10-year outcomes of transverse subtrochanteric shortening osteotomy in cementless, modular THA in Crowe type IV-Hartofilakidis type III DDH.Methods
We reviewed 62 patients (76 hips) who underwent cementless THA with transverse subtrochanteric shortening osteotomy from 2002-2010. There were 49 women and 13 men with a mean age of 38.8 years, all of whom had Crowe type IV DDH. Mean follow-up period was 10 years. The acetabular cup was implanted in placement of the anatomical hip center in all hips.Results
The mean Harris Hip Score significantly improved from 38.8 points to 86.1 points. Similarly, modified Merle d'Aubigne and Postel Hip Score, Hip dysfunction and Osteoarthritis Outcome Score, and SF-12 also significantly improved. The mean limb length discrepancy was reduced from 4.3 cm to 1.0 cm. At mean follow-up of 10 years, there were 3 cases of postoperative dislocation, 2 cases of transient nerve palsy, 1 case of nonunion, and 4 cases of intraoperative fracture. Revision surgery was performed in 2 patients due to isolated loosening of acetabular component and femoral stem, respectively.Conclusion
Our data demonstrated that the cementless, modular THA combined with transverse subtrochanteric shortening osteotomy was an effective and reliable technique with high rates of successful fixation of the implants and satisfactory clinical outcomes. 相似文献14.
Background
Treatment of acetabular bone loss with impaction bone grafting (IBG) at revision total hip arthroplasty is highly dependent on mechanical stability and graft compression for clinical success. Here, we describe a new technique to further compress and stabilize the acetabular graft bed with a thin, perforated titanium shell.Methods
We retrospectively analyzed 170 cases of acetabular revision arthroplasty 7 years (standard deviation 2.8) after IBG combined with a graft-compressing titanium shell implant. The patients were reviewed by clinical score and radiography. Three patients were lost to follow-up. The medical journals of the 33 deceased cases were reviewed for any reoperation. Of the 170 cases, 74 had a cavitary acetabular bone defect, 93 had combined segmental and cavitary bone defects, and 3 had a pelvic dissociation. Bone graft incorporation was assessed and correction of the hip center of rotation was calculated.Results
Five cases (3%) were reoperated for mechanical loosening. One more was assessed as loose but asymptomatic and was not planned for revision. There were 3 reoperations for recurrent dislocation, 2 for deep infection and 1 for technical error. Reoperation for any reason, as the end point of survivorship, showed a survival rate of 92% after 10 years. Hip score according to Merle, d'Aubigne, and Postel increased from 10.8 (preoperatively) to 16.4 at follow-up. The clinical and radiological results were excellent.Conclusion
IBG combined with the compressing shell results in excellent results for this challenging condition. 相似文献15.
Background
Failed total hip arthroplasty caused by mechanically assisted crevice corrosion (MACC) has serious consequences such as adverse local tissue reaction. Revision is currently indicated for significant hip pain, stiffness, and dysfunction; hip instability; progressive bone loss; and soft tissue destruction. Outcomes of this revision surgery are not yet completely understood.Methods
We examined the surgical outcomes at a minimum of 6 months (average, 25; range, 7-68 months) in a cohort of 27 consecutive patients who underwent revision total hip arthroplasty for MACC associated with a single implant vendor and taper type.Results
Major orthopedic complications occurred in 7 of 27 patients (25.9%), each after the original revision surgery. Five additional major complications occurred in subsequent surgeries. Postoperative hip dislocation occurred in 6 of 27 (22.2%), deep infection occurred in 3 of 27 (11.1%), and aseptic acetabular loosening, seroma requiring irrigation and debridement, pulmonary embolism, periprosthetic fracture, and reintubation each occurred in 1 of 27 (3.7%). Harris hip scores improved significantly with surgery (P = .0002), but overall, scores were lower for those who had major complications (70.9 vs 89.2), and only 20 of 27 patients (74.1%) had good or excellent outcomes.Conclusion
Symptomatic MACC is a potentially devastating diagnosis, because of decreased soft tissue and bone viability associated with adverse local tissue reaction. This leads to a high early major complication rate. 相似文献16.
Meagan E. Tibbo Cody C. Wyles Peter S. Rose Franklin H. Sim Matthew T. Houdek Michael J. Taunton 《The Journal of arthroplasty》2018,33(7):2173-2176
Background
Synovial chondromatosis (SC) is a rare disease involving cartilaginous metaplasia of synovial tissue. Treatment via synovectomy and loose body removal alone results in elevated recurrence rates, with up to 1 in 5 patients requiring conversion to a hip arthroplasty. The purpose of this study is to investigate outcomes of hip arthroplasty in the setting of SC, focusing on (1) disease-specific survival, (2) implant survivorship and complications, and (3) clinical outcomes.Methods
We identified 26 patients with histologically confirmed SC who underwent hip arthroplasty between 1970 and 2015. Mean follow-up and patient age were 10 years (range 2-35) and 55 years (range 26-82), respectively. At the time of arthroplasty, 21 (81%) patients had “active” disease and underwent synovectomy. No constrained acetabular components were used. Six patients (23%) had a preoperative flexion contracture.Results
The 15-year disease-free survival was 89%. Recurrence occurred in 3 patients at a mean of 0.8 years (range 0.03-1.2) postoperatively. Thirteen patients (50%) sustained a complication [most commonly aseptic loosening (n = 3, 12%)] and 7 required revision surgery. The 10-year and 15-year revision-free survival was 82% and 64%, respectively. Mean Harris Hip Score improved significantly from 50 (range 23-85) preoperatively to 82 (range 44-100) postoperatively (P < .001).Conclusion
Arthroplasty with simultaneous synovectomy provides reliable pain relief and excellent disease-specific survival at long-term follow-up; however, revision and complication rates were high. 相似文献17.
Brandon J. Yuan Matthew P. Abdel William W. Cross Daniel J. Berry 《The Journal of arthroplasty》2017,32(11):3438-3444
Background
Although use of intramedullary hip screws (IMHS) for intertrochanteric (IT) hip fractures has become more common, limited data have suggested difficulties in conversion to hip arthroplasty. The present study investigates whether conversion of failed IT fracture fixation with an intramedullary vs extramedullary device leads to different rates or types of complications or decreased arthroplasty survivorship.Methods
One hundred eleven patients were converted to hip arthroplasty after previous surgical treatment of an IT fracture from 2000 to 2010. Seventy hips had been treated with an extramedullary fixation device (EFD) and 41 with an IMHS.Results
Length of hospital stay and operative times were similar (6 days and 206 minutes for EFD vs 6 days and 208 minutes for IMHS; P > .7). The presence of a Trendelenburg gait at last clinical follow-up was similar between groups (37% in EFD group and 38% in IMHS group). Five-year survivorship free of revision was 95% in the EFD group and 94% in the IMHS group (P = 1.0). The overall complication rate was similar (21% for EFD vs 27% for IMHS; P = .51) between groups. The most common complication was late periprosthetic fracture in the EFD patients (6% vs 0% in IMHS; P = .29) and intraoperative femoral fracture in the IMHS patients (12% vs 1% in EFD; P = .02).Conclusion
The short-term survivorship of conversion hip arthroplasty after surgical treatment of an IT fracture is excellent regardless of original fracture fixation method. If early complications, particularly periprosthetic fractures, can be minimized, the likelihood of a successful outcome is high. The risk of intraoperative femoral fracture was greater during conversion from an IMHS compared to an EFD. 相似文献18.
Meagan E. Tibbo Cody C. Wyles Peter S. Rose Franklin H. Sim Matthew T. Houdek Michael J. Taunton 《The Journal of arthroplasty》2018,33(5):1467-1471
Background
Pigmented villonodular synovitis (PVNS) is a rare, benign, painful proliferation of the synovium previously treated successfully with total hip arthroplasty (THA). Published results come from small series; therefore, the purpose of this study is to investigate the outcomes of THA in the setting of PVNS.Methods
We identified 25 patients with histologically confirmed, diffuse PVNS who underwent THA between 1971 and 2013. Mean follow-up and age was 10 years and 39 years. Before arthroplasty, 16 patients (64%) had at least 1 surgical procedure (mean, 1; range, 1-3) to treat PVNS. Twenty (80%) patients had “active” disease and underwent synovectomy. No constrained acetabular components were used.Results
The 10-year disease free-survival was 100%. Recurrence occurred in 1 patient at 24 years postoperatively. Nineteen patients (76%) sustained a complication (most commonly component loosening (n = 12 [48%]), and 16 required revision surgery. The 10-year revision-free survival was 66% for conventional polyethylene implants and 100% for highly cross-linked polyethylene devices. Mean Harris Hip Score improved significantly from 48 (range, 23-69) preoperatively to 78 (range, 47-96) postoperatively (P < .001).Conclusion
THA in the setting of PVNS improves patient function with a low rate of local recurrence. Complication and revision rates are high in this series likely owing to the young and active patient population and the use of conventional polyethylene. Modern bearings theoretically reduce the risk of revision. 相似文献19.
Maurizio Montalti Francesco Castagnini Federico Giardina Enrico Tassinari Federico Biondi Aldo Toni 《The Journal of arthroplasty》2018,33(6):1813-1819
Background
Total hip arthroplasty (THA) in severe developmental dysplasia of the hip (DDH) is a challenging procedure. The most used techniques involve anatomic cup positioning, augmentation femoral osteotomy. However, anatomic cup positioning is not always feasible in severe DDH and osteotomy nonunion may ensue. The purpose of the study was to assess the survivorship, the hip score results, the radiological parameters (fixation, loosening, component position) of a large cohort of patients with Crowe III and IV DDH, treated with high hip center and modular necks THAs.Methods
Eighty-four THAs in Crowe III and IV DDH were evaluated, achieving a final follow-up of 15.1 years. All the patients were treated with the same cementless implant (modular necks and ceramic-on-ceramic coupling) and the same approach (high cup placement with slight medialization). The patients were clinically evaluated (Harris Hip score and Merle d'Aubigne and Postel score). A radiographic evaluation was performed, analyzing the orientation of the cup.Results
Eighty patients were available at the last follow-up. The clinical scores were good at the final follow-up. Two sciatic lesions occurred: one patient fully recovered. The overall survivorship was 90.5% at 15 years: only 2 cases of aseptic loosening were reported. The mean center of rotation height was 33 ± 8 mm and the medialization was 30 ± 5 mm.Conclusion
A high cup placement with slight medialization is a valid technique in DDH patients. A good restoration of the offset, ceramic-on-ceramic coupling and a porous socket may provide durable results, overcoming the effects of increasing joint reaction forces related to high cup placement. 相似文献20.
Hiroyuki Makita Marcel Kerboull Yutaka Inaba Taro Tezuka Tomoyuki Saito Luc Kerboull 《The Journal of arthroplasty》2017,32(11):3502-3509