共查询到20条相似文献，搜索用时 390 毫秒
1.
Xigong Li Yang Lu Junying Sun Xiangjin Lin Tiansi Tang 《The Journal of arthroplasty》2017,32(2):475-479
Background
The purpose of this study was to evaluate the functional and radiographic results of patients with Crowe type-IV hip dysplasia treated by cementless total hip arthroplasty and double chevron subtrochanteric osteotomy.Methods
From January 2000 to February 2006, cementless total hip arthroplasty with a double chevron subtrochanteric shortening osteotomy was performed on 18 patients (22 hips) with Crowe type-IV dysplasia. The acetabular cup was placed in the position of the anatomic hip center, and subtrochanteric femoral shortening osteotomy was performed with the use of a double chevron design. The clinical and radiographic outcomes were reviewed with a mean follow-up of 6.5 years (5-10 years).Results
The mean amount of femoral subtrochanteric shortening was 38 mm (25-60 mm). All osteotomy sites were healed by 3-6 months without complications. The mean Harris Hip Score improved significantly from 47 points (35-65 points) preoperatively to 88 points (75-97 points) at the final follow-up. The Trendelenburg sign was corrected from a positive preoperative status to a negative postoperative status in 12 of 22 hips. No acetabular and femoral components have loosened or required revision during the period of follow-up.Conclusion
Cementless total hip arthroplasty using double chevron subtrochanteric osteotomy allowed for restoration of anatomic hip center with safely functional limb lengthening, achieved correction of preoperative limp, and good functional and radiographic outcomes for 22 Crowe type-IV dislocation hips at the time of the 5- to 10-year follow-up. 相似文献2.
Kar H. Teoh Robert D.J. Whitham David M. Golding Jenny F. Wong Paul Y.F. Lee Aled R. Evans 《The Journal of arthroplasty》2018,33(2):460-463
Background
The R3 cementless acetabular system was first marketed in Australia and Europe in 2007. Previous papers have shown high failure rates of the R3 cup with up to 24% with metal-on-metal bearing. There are currently no medium term clinical results on this cup. The aim of the study is to review our results of the R3 acetabular cup with conventional bearings with a minimum of 5-year follow-up.Methods
Patients who were implanted with the R3 acetabular cup were identified from our center's arthroplasty database. A total of 293 consecutive total hip arthroplasties were performed in 286 patients. The primary outcome was revision. The secondary outcomes were the Oxford Hip Scores (OHS) and radiographic evaluation.Results
The mean age of the patients was 69.4 years. The mean preoperative OHS was 23 (range 10-34) and the mean OHS was 40 (range 33-48) at the final follow-up. Radiological evaluation showed an excellent ARA score in all patients at 5 years. None of the R3 cups showed osteolysis at the final follow-up. There were 3 revisions in our series, of which 2 R3 cups were revised. The risk of revision was 1.11% at 5 years.Conclusion
Our experience of using the R3 acetabular system with conventional bearings showed high survivorship and is consistent with the allocated Orthopaedic Data Evaluation Panel rating of 5A* as rated in 2015 in the United Kingdom. 相似文献3.
Jun-Ki Moon Yeesuk Kim Kyu-Tae Hwang Jae-Hyuk Yang Young-Ha Oh Young-Ho Kim 《The Journal of arthroplasty》2018,33(7):2165-2172
Background
Second-generation, metal-on-metal total hip arthroplasty (MoM THA) using a 28-mm head has shown favorable results compared with large head MoM THA. The purpose of this study is to evaluate the long-term outcomes of cementless primary MoM THA with a 28-mm head and the incidence of osteolysis using computed tomography.Methods
A total of 92 patients (53 men and 39 women) who underwent primary cementless MoM THA (114 hips) with a 28-mm head were enrolled in this study. Their mean age was 46.2 years at the time of surgery. The mean follow-up duration was 20 years. The Harris hip score, presence of thigh or groin pain, radiographic results, presence of peri-implant osteolysis, histologic analysis, and Kaplan-Meier survival curves were evaluated.Results
The mean preoperative Harris hip score of 50.5 improved to 85.1 at the final follow-up. Eight patients (8 hips) experienced groin pain, but none had thigh pain. Twelve revisions (6.2%) were performed including 10 hips for aseptic loosening with osteolysis and 2 hips for periprosthetic fracture around the stem. At 23 years, 91% of patients were free from revision of the acetabular component due to aseptic loosening and 90.1% were free from revision of both femoral and acetabular components due to any reason. Osteolysis was identified around the cup in 12 cases (10.5%) and around the stem in 7 cases (6.1%).Conclusion
MoM THA with a 28-mm head showed a relatively low rate of aseptic implant loosening at a mean follow-up of 20 years. 相似文献4.
Vahit Emre Ozden Goksel Dikmen Burak Beksac Ismail Remzi Tozun 《Journal of orthopaedic science》2017,22(3):517-523
Background
To evaluate the long-term clinical and radiological outcomes of cementless total hip arthroplasty (THA) in high riding hip dislocated patients with previous proximal femoral osteotomy.Methods
Twenty-one consecutive patients with a mean age forty-two years were treated with cementless THA Step-cut subtrochanteric femoral osteotomy was performed in all twenty-eight hips. Metal on polyethylene (MoP) and ceramic on ceramic (CoC) bearings were used in two different consecutive time periods. The mean follow-up time was twelve years. Harris hip score, limb length discrepancy, complications, union status of the osteotomy, survivorship of constructs were the criteria for evaluation.Results
The mean Harris hip score improved from 39.5 to 88.7 points. The mean limb length discrepancy in unilateral cases decreased from 54.5 mm to 12.3 mm. The mean amount of femoral shortening was 37 mm. The mean union time was 3.5 months and there were no delayed union and non-union. There were three cup and two femoral revisions due to osteolysis in patients who had MoP. There was only one femoral revision in patients who had CoC. The Kaplan Meier survivorship with an end point of any revision of the stem and the acetabular component was 94% (95% CI, 75%–98%) and 92% (95% CI, 74%–99%) at ten years respectively.Conclusions
Total hip arthroplasty with subtrochanteric step-cut femoral shortening is a successful technique to improve the hip functions and reconstruct limb length discrepancy in young patients with proximal femoral deformities. 相似文献5.
Background
There are limited studies to evaluate long-term clinical and radiographic outcomes of alumina delta ceramic-on-ceramic bearings in cementless total hip arthroplasty (THA). The purpose of this study was to evaluate the clinical and radiographic results, prevalence of osteolysis, squeaking, and fracture of ceramic material associated with the use of the alumina delta ceramic-on-alumina delta ceramic bearing in cementless THA in patients aged <50 years.Methods
We reviewed the cases of 277 patients (334 hips) who underwent a cementless THA using alumina delta ceramic-on-alumina delta ceramic when they were 50 years or younger at the time of surgery. Demographic data; Harris Hip Score; Western Ontario McMaster Universities Osteoarthritis Index; and University of California, Los Angeles activity score were recorded. Radiographic and computerized tomographic evaluations were used to evaluate implant fixation and osteolysis. Squeaking sound and ceramic fracture were documented. The mean follow-up was 7.8 years (range, 6-9).Results
The mean postoperative Harris Hip Score, Western Ontario and McMaster Universities Osteoarthritis Index score, University of California, Los Angeles activity score were 93 points, 15 points, and 8.6 points, respectively. Two patients had thigh pain (grade 7 points). All acetabular components and all but 2 femoral components were well fixed. Thirty-three hips (10%) exhibited clicking sound, and 2 hips (0.6%) exhibited squeaking sound. No hip had osteolysis or ceramic head or liner fracture.Conclusion
Our minimum 6-year follow-up results with the use of alumina delta ceramic-on-alumina delta ceramic bearings in patients aged <50 years suggest that cementless THA provides a high rate of survivorship without evidence of osteolysis or fracture of ceramic material. 相似文献6.
David P. Gwynne-Jones Heath W.R. Lash Andrew W. James Ella E. Iosua John A. Matheson 《The Journal of arthroplasty》2017,32(8):2444-2449
Background
There are relatively few 20-year results of uncemented acetabular components, and most of these are modular designs. This study reports the 20-year results of a monoblock press-fit acetabular component.Methods
A total of 122 total hip arthroplasties (111 patients) using the Morscher cup were reviewed at a mean of 19.7 years. The average age at implantation was 57.3 years (range, 36-74 years), and 81 (66%) were men.Results
Twenty-two patients (25 hips) had died. Seven hips were revised, including 5 acetabular revisions. Six patients (6 hips) declined to participate but were known not to have been revised. The mean Oxford hip score was 41.1 (range, 22-48), and the mean reduced Western Ontario and McMaster Universities Osteoarthritis Index score was 5.7/48 (range, 0-24). Eccentric wear was seen in 13 (15.7%) and major osteolysis in 14 (17%) of 82 surviving hips with radiographs. The all-cause revision rate was 0.32 per 100 observed component years (95% confidence interval [CI], 0.13-0.66). The 20-year Kaplan-Meier survival was 93.4% (CI, 86.6-96.8) for all-cause revisions, 95.5% (CI, 89.4-98.1) for any acetabular revision, and 97.1% (CI, 91.2-99.1) for acetabular aseptic loosening, wear, or osteolysis.Conclusion
The Morscher acetabular component has continued to perform well at 20 years despite using conventional polyethylene with results that match or surpass other cementless acetabulae. 相似文献7.
Marcus Klutzny Gurpal Singh Rita Hameister Gesine Goldau Friedemann Awiszus Bernd Feuerstein Christian Stärke Christoph H. Lohmann 《The Journal of arthroplasty》2019,34(5):965-973
Background
There is a paucity of reports on osteolysis associated with tibial screw fixation in cementless total knee arthroplasty (TKA), and the pathophysiology is not clear. This study aimed to describe the pathology related to screw track osteolysis around the tibia in cementless TKA.Methods
The study cohort comprised 100 revised cementless TKAs with tibial screw fixation. Screw track osteolysis and various screw angles were analyzed radiologically. Tissue samples from the joint capsule and the osteolytic cavity were investigated for metal/polyethylene wear. The type of tissue response was determined using immunohistochemistry. Retrieved tibial polyethylene inserts were analyzed for screw hole impression and mode of wear. Tissue metal content was measured by inductively coupled plasma optical emission spectrometry. Electrochemical reactions between the tibial tray and the cancellous screws were investigated.Results
Radiological analysis showed screw track osteolysis predominantly at the medial aspect of the tibial component, and the severity of osteolysis positively correlated with smaller medial proximal tibial screw angles. Osteolysis was associated with high titanium concentrations but not with polyethylene particles. An open circuit potential between the screw and the tibial base plate was measured. Necrosis, osteolytic cyst formation and macrophages, T and B cells, and dendritic cells were present.Conclusion
The present study highlights the risk for screw track osteolysis in cementless TKA with screw fixation. Our data collectively suggest that titanium wear may contribute to screw track osteolysis in the cementless TKA design. The contribution of screw angles is difficult to prove. 相似文献8.
Hirofumi Oshima Sakae Tanaka Yoshio Takatori Takeyuki Tanaka Hisatoshi Ishikura Toru Moro 《The Journal of arthroplasty》2017,32(10):3065-3070
Background
We evaluated the clinical and radiographic outcomes, including femoral head penetration, of total hip arthroplasty performed using a specific polyethylene (PE) liner in small Asian patients at 10 years after the index surgery. In addition, we investigated whether femoral head penetration was affected by patient-related, implant-related, and surgical factors.Methods
Between August 2002 and June 2005, for cementless primary total hip arthroplasty, we used acetabular PE liners that were manufactured from GUR 1050 resin, machined from isostatic compression-molded bar stock, and sterilized with a gamma ray irradiation in argon gas. We assessed 82 hips in 78 patients who received these liners.Results
The mean Harris hip score improved from 41.0 preoperatively to 84.5 at 10 years postoperatively. Periprosthetic osteolysis was observed in 7 hips (9.8%). No acetabular component migration was detected, and no revision surgery was performed 10 years postoperatively. The mean steady-state wear rate was 0.031 mm/y, which was lower than the wear rate for other conventional PE liners of the previous studies. Among the patient-related, implant-related, and surgical factors, sex was significantly associated with the mean steady-state wear rate, with a higher rate in male patients than in female patients.Conclusion
PE acetabular liners used in small Asian patients show similar clinical outcomes and reduced wear compared with those of other liners. In addition, sex is significantly associated with the mean steady-state wear rate, and the steady-state wear rate is higher in male patients than in female patients. 相似文献9.
Vahit Emre Ozden Goksel Dikmen Burak Beksac Ismail Remzi Tozun 《Journal of orthopaedic science》2018,23(3):525-531
Background
Placement of acetabular cup in the dysplastic hip is a challenging procedure. Using bulk femoral head autograft to increase the bony coverage of the cup is one of the techniques, which have been described. The impact of cup position on cup and autograft survival is a controversial issue. We aimed to determine whether the position of cementless acetabular cup used in conjunction with femoral head autograft in dysplastic hips affected the autograft-host incorporation with its final radiographic appearance and the cup survivorship into the second decade.Methods
Thirty-eight dysplastic hips with varying Crowe types in 31 patients (30 women and one man) were included. The mean age was 47 years (range, 29–64 years) and the mean follow-up was 20.3 years (range, 14.8–25.9 years). The initial postoperative and final radiographs were evaluated. The survival rate of the cups was analysed using Kaplan–Meier statistics and the log-rank test. Multivariate analysis was used to evaluate the effect of variables (Crowe type, radiographic initial host bone coverage over the cup and position of the cup) on survivorship.Results
The acetabular cups were positioned anatomical in 27/38 hips according to Ranawat measurement technique. Trabecular bridging at graft–host interface was seen in all cases at an average 22.1 months. Neither acetabular cup position nor initial host bone coverage over acetabular cup less than 50% had any significant effect on either cup survival or final radiographic appearance of the graft. The 20-year cup survival rate without aseptic revision was 66% (95 CI, 52%–84%). No revision was performed due to graft resorption.Conclusion
Twenty-year survival rate of the cementless cup combination with femoral head autograft showed no significant differences whether it was placed at high or anatomic hip centre. The final radiographic appearance of the autograft was not affected from either the cup location or the initial radiographic horizontal host bone coverage. 相似文献10.
Manabu Tsukamoto Hideo Ohnishi Toshiharu Mori Makoto Kawasaki Soshi Uchida Akinori Sakai 《The Journal of arthroplasty》2017,32(1):161-165.e1
Background
Cross-linked polyethylene (XLPE) acetabular liners used in cementless total hip arthroplasty (THA) have demonstrated better wear resistance at 10 years compared with conventional polyethylene (CPE) liners. No clinical studies have compared XPLE to CPE liners beyond 10 years.Methods
We performed a 15-year retrospective cohort study on cementless THA performed in patients with developmental hip dysplasia to measure the differences in polyethylene wear rates and the presence of osteolysis. Twenty-four THAs with XLPE and 17 THAs with CPE were evaluated. The mean age of patients was 55.9 years (41-68) in the XLPE group and 54.4 years (40-67) in the CPE group. The mean follow-up period was 15.1 years (13.9-16.1) in the XLPE group and 15.2 years (14.5-16.0) in the CPE group.Results
The XLPE group had a significantly lower wear rate at 5 and 10 years compared with the CPE group; however, no significant difference was found at 15 years (XLPE group, 0.040 mm/y; CPE group, 0.034 mm/y). In addition, the incidence of osteolysis did not differ significantly between the groups. However, the incidence of excessive wear between 10 and 15 years after surgery in the XLPE group was significantly higher than that in the CPE group.Conclusion
XLPE demonstrated no advantage in the wear rate or the incidence of osteolysis at 15 years, despite having superior wear resistance up to 10 years. It is concerning that the incidence of excessive wear was higher in the XLPE group between 10 and 15 years, and this finding should alert the arthroplasty community to this possible problem with the more highly cross-linked polyethylene. 相似文献11.
Edward M. DelSole Jonathan M. Vigdorchik Ran Schwarzkopf Thomas J. Errico Aaron J. Buckland 《The Journal of arthroplasty》2017,32(6):1910-1917
Background
Changes in spinal alignment and pelvic tilt alter acetabular orientation in predictable ways, which may have implications on stability of total hip arthroplasty (THA). Patients with sagittal spinal deformity represent a subset of patients who may be at particularly high risk of THA instability because of postural compensation for abnormal spinal alignment.Methods
Using standing stereoradiography, we evaluated the spinopelvic parameters, acetabular cup anteversion, and inclination of 139 THAs in 107 patients with sagittal spinal deformity. Standing images were compared with supine pelvic radiographs to evaluate dynamic changes in acetabular cup position. Dislocation and revision rates were procured through retrospective chart review. The spinal parameters and acetabular cup positions among dislocators were compared with those who did not dislocate.Results
The rate of THA dislocation in this cohort was 8.0%, with a revision rate of 5.8% for instability. Patients who sustained dislocations had significantly higher spinopelvic tilt, T1-pelvic angle, and mismatch of lumbar lordosis and pelvic incidence. Among all patients, 78% had safe anteversion while supine, which decreased significantly to 58% when standing due to increases in spinopelvic tilt. Among dislocating THA, 80% had safe anteversion, 80% had safe inclination, and 60% had both parameters within the safe zone.Conclusion
In this cohort, patients with THA and concomitant spinal deformity have a particularly high rate of THA instability despite having an acetabular cup position traditionally thought of as within acceptable alignment. This dislocation risk may be driven by the degree of spinal deformity and by spinopelvic compensation. Surgeons should anticipate potential instability after hip arthroplasty and adjust their surgical plan accordingly. 相似文献12.
Shengjie Guo Hao Tang Yixin Zhou Yong Huang Hongyi Shao Dejin Yang 《The Journal of arthroplasty》2018,33(5):1579-1587
Background
Cementless hip arthroplasty is increasingly gaining popularity worldwide. Radiologic identification of osteointegration is key to confirming biologic fixation. We conducted the study reported here to determine the sensitivity and specificity of digital tomosynthesis with metal artifact reduction (TMAR), radiography, and conventional computed tomography in detecting osteointegration in cementless hip arthroplasty.Methods
We prospectively included data for 24 patients who underwent revision hip arthroplasty in our hospital, with 13 femoral and 14 acetabular cementless components retrieved that contained solid evidence of biologic fixation. All patients underwent 3 examinations before surgery, and evidence of osteointegration on retrieved prostheses was used as the reference standard. Seven orthopedic surgeons evaluated these images independently using uniform criteria.Results
On the femoral side, the sensitivity and specificity of detecting osteointegration were 73.8% ± 4.6% and 94.3% ± 1.5%, respectively, for TMAR; 50.4% ± 5.3% and 87.8% ± 2.1%, respectively, for radiography; and 36.4% ± 5.1% and 90.9% ± 1.9%, respectively, for CT. On the cup side, the corresponding values were 60.2% ± 8.3% and 86.4% ± 5.7%, respectively, for TMAR; 45.9% ± 8.5% and 66.4% ± 7.8%, respectively, for radiography; and 45.1% ± 8.5% and 73.5% ± 7.3%, respectively, by computed tomography.Conclusion
TMAR significantly improved the accuracy osteointegration detection in cementless hip arthroplasty (P < .017). 相似文献13.
James W. Pritchett 《The Journal of arthroplasty》2018,33(11):3508-3513
Background
Hip dysplasia is the leading cause of hip arthritis in young adults. These patients often participate in active lifestyles that require a full and stable range of motion.Methods
Between 2001 and 2011, 232 consecutive polyethylene resurfacing arthroplasties were performed in 201 patients with advanced arthritis from severe acetabular insufficiency due to dysplasia. All patients had Crowe II or III disease. Their mean age at surgery was 43 years. A 2-piece cementless acetabular resurfacing shell with dome screws and a highly cross-linked polyethylene liner were implanted to provide secure fixation, early weight bearing, and a stable hip. Additional structural bone grafts and/or fixation were not used. A cemented or cementless resurfacing prosthesis was used on the femur.Results
During a mean follow-up of 10 years, 8 hips (3.5%) were converted to a total hip arthroplasty due to acetabular loosening (1), femoral neck fracture (2), femoral osteonecrosis (2), infection (2), or persistent pain (1), resulting in a mean survival of the resurfacing prostheses of 96% (95% confidence interval 89-98). There were no pending revisions and no dislocations. At 2 years postoperative, Harris Hip Scores improved from a preoperative mean of 55 to 97 and University of California Los Angeles activity scores improved from 5 to 8.Conclusion
Hip resurfacing using a 2-piece polyethylene acetabular component for advanced dysplasia has resulted in excellent function and implant survivorship with a low rate of complications at mid-term follow-up. 相似文献14.
Béchir Ayoub Sophie Putman Pierre Cholewinski Amandine Paris Henri Migaud Julien Girard 《The Journal of arthroplasty》2017,32(4):1206-1210
Background
Total hip arthroplasty with metal-on-metal (MoM) bearings has been suspected to cause adverse reactions to metal debris (ARMD), with the incidence varying greatly by implant type and patient gender. The prevalence of ARMD from small-diameter MoM bearings in women is unknown, especially after 10 years of follow-up (FU).Methods
Cementless 28-mm MoM total hip arthroplasty bearings (Metasul) were implanted consecutively in 42 active women between 1996 and 2002. They were reviewed after a minimum of 10 years' FU with clinical, laboratory, radiological, and ultrasound assessments.Results
Mean FU was 15.9 years (range, 13-18). The mean Postel-Merle d'Aubigné and Oxford scores were 16.9 (range, 13-18) and 15.1 (range, 12-24), respectively, at FU. Mean cup inclination angle was 46.3° (range, 35°-57°). No femoral osteolysis was detected, but limited acetabular osteolysis (11%) over the screw holes occurred in 5 cases. No liquid or solid synovial reactions or ARMD were apparent on ultrasound, even in the 5 cases of pelvic osteolysis. Mean chromium levels were 1.32 μg/L (range, 0.1-7.9) and cobalt levels were 1.85 μg/L (range, 0.35-13.6). Cobalt was >3 μg/L in only 3 cases. The 15.9-year survivorship was 95% (range, 94.1%-98.9%).Conclusion
Reliable results were obtained with 28-mm MoM bearings, notably in young, active patients. This implant configuration requires very accurate positioning. No ARMD was seen in this group at 16 years' FU. 相似文献15.
Brian P. Chalmers Cameron K. Ledford Michael J. Taunton Rafael J. Sierra David G. Lewallen Robert T. Trousdale 《The Journal of arthroplasty》2018,33(5):1501-1506
Background
Recurrent instability remains a challenge after revision total hip arthroplasty (THA). We report the outcomes of cementing a cementless dual mobility (DM) component into a stable acetabular shell for the treatment and/or prevention of instability in revision THA.Methods
Eighteen patients (18 THAs) undergoing revision THA with a specific monoblock DM construct cemented into a new acetabular component or an existing well-fixed component from 2011 to 2014 were retrospectively reviewed. Tumor prostheses and total femoral replacements were excluded. In 9 patients (50%), components were implanted specifically for recurrent dislocations. Mean age was 64 years; mean follow-up was 3 years. Patients underwent an average of 4 prior hip operations (range 2-6).Results
No cemented DM cups dissociated at the cement-cup interface. Three patients (17%) experienced a postoperative dislocation. One required a revision to constrained liner and 2 underwent open reduction with retention of the DM construct. Harris Hip Scores improved from 53 to 82 postoperatively (P < .001).Conclusion
Cementation of a monoblock cup DM construct, an off-label use as the construct is not specifically made for cementation, into a well-fixed acetabular component provides an alternative to enhance prosthetic stability in (1) recurrently dislocating THAs with well fixed, well-positioned acetabular components and (2) complex acetabular reconstructions in which constraint should be avoided. While not a perfect solution in this series, DM constructs provide a number of advantages including no added constraint at the interface and a large effective femoral head to diminish prosthetic impingement. 相似文献16.
John A.J. Broomfield Tamer T. Malak Geraint E.R. Thomas Antony J.R. Palmer Adrian Taylor Sion Glyn-Jones 《The Journal of arthroplasty》2017,32(4):1186-1191
Background
Polyethylene acetabular components are common in hip arthroplasty. Highly cross-linked polyethylene (HXLPE) has lower wear than ultra-high molecular weight polyethylene (UHMWPE). Evidence suggests that wear particles induce inflammation causing periprosthetic osteolysis contributing to implant loosening with wear rates of 0.05 mm/y were considered safe. We aimed to compare incidence and volume of periacetabular osteolysis between HXLPE and UHMWPE using computed tomography.Methods
Initially, 54 hips in 53 patients were randomized to HXLPE or UHMWPE acetabular liner. At 10 years, 39 hips in 38 patients remained for the radiostereometric analysis' demonstrating significantly lower wear in the HXLPE group. At 12 years, 14 hips in 13 patients were lost to follow-up leaving 25 hips for computed tomography assessment. Images were reconstructed to detect osteolysis and where identified, areas were segmented and volumized.Results
Osteolysis was observed in 8 patients, 7 from the UHMWPE group and only 1 from the HXLPE group (Fisher exact, P = .042). There was no correlation between the amount of polyethylene wear and osteolysis volume; however, the radiostereometric analysis-measured wear rate in patients with osteolysis from both groups was significantly higher than overall average wear rate.Conclusion
This data demonstrates lower incidence of periacetabular osteolysis in the HXLPE group of a small cohort. Although numbers are too low to estimate causation, in the context of lower wear in the HXLPE group, this finding supports the hypothesis that HXLPE may not elevate osteolysis risk, and hence does not suggest that HXLPE wear particles are more biologically active than those generated by earlier generations of polyethylene. 相似文献17.
Jared S. Bookman Ian D. Kaye Kevin K. Chen Fredrick F. Jaffe Ran Schwarzkopf 《The Journal of arthroplasty》2017,32(8):2587-2589
Background
Short-term and intermediate-term wear rates for highly cross-linked polyethylene (HCLPE) liners in total hip arthroplasty (THA) are significantly lower than published rates for traditional polyethylene liners. The aim of this study was to report the longest-to-date follow-up of a specific HCLPE liner.Methods
A series of 35 THAs using a specific HCLPE liner were reviewed. Anteroposterior radiographs were reviewed for femoral head penetration, the presence of femoral and/or acetabular osteolysis, long-term survival, total wear, and wear rates in all patients.Results
The average patient age at time of surgery was 70 years with an average follow-up of 10 years (118 months; range, 7.2-13.4 years). The mean wear rate in our cohort was 0.07 mm/y. Total wear was 0.71 mm over the study period. No hips showed evidence of osteolysis in any zones. Survivorship at latest follow-up was 100% with all-cause revision as an end point.Conclusion
The wear rate of HCLPE liners continues to be lower than published wear rates for traditional polyethylene and continues to reaffirm the acceptably low wear rates using HCLPE acetabular liner in primary THA. 相似文献18.
Background
Parkinson disease (PD) results in severe limitation in ambulation caused by abnormality of gait and posture. The rate of complications, including fractures and dislocation after total hip arthroplasty (THA), can be higher among these patients. The goal of this study was to investigate the long-term outcomes of primary and revision THAs with cementless dual mobility implants.Methods
This retrospective study examines 59 PD patients who had surgery between 2002 and 2012. All the primary cases were performed for osteoarthritis and all patients received cementless acetabular implants with dual mobility bearing surface. The femoral stem was cemented in 4 patients who underwent revision surgery. The mean follow-up time was 8.3 years (4-14 years).Results
Good to excellent pain relief was achieved in 53 of 57 patients at the 2-year follow-up and in 40 of 47 patients at their latest follow-up. The most common medical complication was cognitive impairment (12 of 57 patients). One patient sustained an intraprosthetic hip dislocation 9 years after surgery, which required revision. Four patients sustained periprosthetic femoral fractures with well-fixed stem, requiring open reduction and internal fixation. The disability had increased in 68% of the patients in the latest follow-up visit.Discussion
Our study shows that elective primary or revision THA using cementless implants with dual mobility bearing surface in patients with PD provides satisfactory long-term outcomes, although many of these patients may see a general worsening of their activities over time due to PD. 相似文献19.
Kensuke Yoshino Tadashi Tsukeoka Yoshikazu Tsuneizumi Tae Hyun Lee Junichi Nakamura Masahiko Suzuki Seiji Ohtori 《The Journal of arthroplasty》2017,32(11):3495-3501
Background
Bone deficiency in revision total hip arthroplasty is a surgical challenge. The Murata-Chiba cup supporter (MC support ring) is an acetabular component supporter for a cementless porous-coated cup. The purpose of this study is to examine the clinical and radiographic outcomes of reconstruction of acetabular bone deficiency using iliac autografts supported by an MC support ring in a revision setting with minimum 15-year follow-up.Methods
Fifty-nine consecutive revision total hip arthroplasties (57 patients) using the MC support ring were followed for a minimum of 15 years. Nine hips had American Academy of Orthopaedic Surgeons type II deficiency and 24 had type III defects of the acetabulum. Clinical outcomes were evaluated using the Harris hip score. Radiographic evaluation included assessment for loosening and bone graft incorporation. Kaplan-Meier survival analysis was performed.Results
At a minimum 15-year follow-up (mean, 17.6 years), 32 patients (33 hips) were alive, 17 patients (18 hips) were deceased, and 8 patients (8 hips) were lost to follow-up. The mean Harris hip score improved from 44.3 to 77.2 at final follow-up. Four hips required reoperation due to deep infection (2 hips) and liner dissociation (2 hips), but no acetabular components were revised for aseptic loosening. Incorporation of the bone graft occurred in all cases. One unrevised patient had radiographic failure. Survivorship at 15 years with re-revision or radiographic failure as the end point was 90.6% (95% confidence interval, 83.0%-98.8%).Conclusion
The reconstruction of acetabular bone deficiency using autografts supported by an MC support ring provided satisfactory clinical and radiological results at 17.6 years postoperatively. 相似文献20.
Ting-Xian Ling Jin-Long Li Kai Zhou Qiang Xiao Fu-Xing Pei Zong-Ke Zhou 《The Journal of arthroplasty》2018,33(2):453-459