A novel approach to improving recombinant factor VIIa activity with a preserved platelet preparation

Recombinant activated factor VII (NovoSeven, rFVIIa) is used to abrogate bleeding in haemophiliacs with inhibitors and is hypothesised to work by increasing activated factor X generation on the platelet surface. We hypothesised that rFVIIa activity could be increased by the co-addition of platelet procoagulant surface. This study characterised the ability of a rehydrated, lyophilised (RL) platelet preparation to increase rFVIIa activity in haemophilic conditions. RL platelets supported thrombin generation in the presence of factors VIII and IX but, in the absence of factors VIII and IX, thrombin generation was significantly reduced. RL platelets supported rFVIIa-mediated thrombin generation in a rFVIIa-concentration dependent manner. In a cell-based in vitro model of haemophilia, the presence of RL platelets increased the rFVIIa-dependent thrombin generation rate 2.8-fold compared with rFVIIa alone. Similarly, the addition of RL platelets plus rFVIIa to the in vitro model of haemophilia and to haemophilic platelet-rich plasma shortened the onset of clot formation and increased clot stability in a fibrinolytic environment versus rFVIIa alone. These results suggest that RL platelets can support rFVIIa-mediated thrombin generation, and that co-administration of RL platelets with rFVIIa may increase the efficacy of rFVIIa in some patients.     

Recombinant factor VIIa enhances platelet deposition from flowing haemophilic blood but requires the contact pathway to promote fibrin deposition

In prior microfluidic studies with haemophilic blood perfused over collagen, we found that a severe deficiency (<1% factor level) reduced platelet and fibrin deposition, while a moderate deficiency (1–5%) only reduced fibrin deposition. We investigated: (i) the differential effect of rFVIIa (0.04–20 nm ) on platelet and fibrin deposition, and (ii) the contribution of the contact pathway to rFVIIa‐induced haemophilic blood clotting. Haemophilic or healthy blood with low and high corn trypsin inhibitor (CTI, 4 or 40 μg mL^?1) was perfused over collagen at an initial venous wall shear rate of 100 s^?1. At 100 s^?1 wall shear rate, where FXIIa leads to thrombin production without added tissue factor, FXI‐deficient blood (3%) or severely FVIII‐deficient blood (<1%) produced no fibrin at either CTI level. Whereas rFVIIa potently enhanced platelet deposition, fibrin generation was not rescued. Distinct from the high CTI condition, engagement of the contact pathway (low CTI) in moderately FVIII‐deficient (3%) or moderately FIX‐deficient blood (5%) resulted in enhanced platelet and fibrin deposition following 4 nm rFVIIa supplementation. In mildly FVIII‐deficient blood (15%) at <24 h since haemostatic therapy, rFVIIa enhanced both platelet and fibrin generation in either CTI condition although fibrin was produced more quickly and abundantly in low CTI. For tissue factor‐free conditions of severe haemophilic blood clotting, we conclude that rFVIIa reliably generates low levels of ‘signaling’ thrombin sufficient to enhance platelet deposition on collagen, but is insufficient to drive fibrin polymerization unless potentiated by the contact pathway.     

Effects of recombinant activated factor VII on thrombin-mediated feedback activation of coagulation

Thrombin is a key hemostatic enzyme, which propagates its own generation by activating factors V, VIII, and XI. Sustained thrombin generation also activates thrombin-activatable fibrinolysis inhibitor (TAFI), which stabilizes fibrin clot against fibrinolysis. Recombinant activated factor VII (rFVIIa) is considered a novel hemostatic intervention for refractory bleeding, but rebleeding episodes related to fibrinolysis still occur. The present study aimed to investigate the antifibrinolytic effects of rFVIIa in relation to thrombin generation. Using thrombelastography, the effects of rFVIIa on thrombin-activated fibrin formation and on fibrinolysis induced by tissue plasminogen activator were evaluated in various factor-deficient plasma samples. A Thrombinoscope was used to quantitate thrombin generation. Thrombin increased antifibrinolytic activity in a concentration-dependent manner as demonstrated by a longer clot lysis time. In plasma deficient in factors V, VIII, IX, X, or XI, clot lysis occurred early (< 20 min), and rFVIIa addition had minimal effect, except for improved antifibrinolytic effect in factor-XI-deficient plasma. A normal clot lysis time was observed in factor-XIII-deficient or dual antithrombin/factor-VIII-deficient plasma. Inhibition of TAFI increased the rate of fibrinolysis. Thrombin generation was delayed or decreased in single factor-deficient plasma except for factor XIII deficiency. After rFVIIa addition, the peak thrombin generation reached over 100 nmol/l in factor-XI-deficient plasma, but not in plasma deficient in factors V, VIII, IX, or X. Thrombin generation and subsequent activation of TAFI were important for clot stability. We conclude that rFVIIa therapy does not compensate for increased susceptibility to fibrinolysis due to lack of factor(s) necessary for the formation of tenase and prothrombinase.     

Elevated prothrombin results in clots with an altered fiber structure: a possible mechanism of the increased thrombotic risk

Individuals with elevated prothrombin levels are at increased risk of venous thrombosis. To understand the mechanism behind this observation, we studied the effect of prothrombin concentration on thrombin generation and fibrin clot structure. The pattern of thrombin generation was directly related to the prothrombin level at all concentrations tested. From 0% to 300% of normal plasma levels of prothrombin, increasing the prothrombin concentration increased the initial rate, peak, and total amount of thrombin generated. Importantly, fibrin clot structure was also affected by the prothrombin concentration. Fibrin clots made from prothrombin concentrations less than 10% of plasma levels were weak and poorly formed. Fibrin clots made at 10% to 100% of plasma levels of prothrombin had similar fiber structures (mass-to-length ratio; mu). However, the fiber mass-to-length ratio decreased with increasing prothrombin levels more than 100% of plasma levels, in a dose-dependent manner. These results suggest that increased levels of prothrombin alter thrombin generation and clot structure. Specifically, elevated prothrombin levels produce clots with reduced fibrin mass-to-length ratios compared with normal clots. We hypothesize that this alteration in fibrin clot structure is an important determinant of the risk of thrombosis.     

Thrombin generation and fibrin clot structure

Generation of a hemostatic clot requires thrombin-mediated conversion of fibrinogen to fibrin. Previous in vitro studies have demonstrated that the thrombin concentration present at the time of gelation profoundly influences fibrin clot structure. Clots formed in the presence of low thrombin concentrations are composed of thick fibrin fibers and are highly susceptible to fibrinolysis; while, clots formed in the presence of high thrombin concentrations are composed of thin fibers and are relatively resistant to fibrinolysis. While most studies of clot formation have been performed by adding a fixed amount of purified thrombin to fibrinogen, clot formation in vivo occurs in a context of continuous, dynamic changes in thrombin concentration. These changes depend on the local concentrations of pro- and anti-coagulants and cellular activities. Recent studies suggest that patterns of abnormal thrombin generation produce clots with altered fibrin structure and that these changes are associated with an increased risk of bleeding or thrombosis. Furthermore, it is likely that clot structure also contributes to cellular events during wound healing. These findings suggest that studies explicitly evaluating fibrin formation during in situ thrombin generation are warranted to explain and fully appreciate mechanisms of normal and abnormal fibrin clot formation in vivo.     

Feedback activation of factor XI by thrombin in plasma results in additional formation of thrombin that protects fibrin clots from fibrinolysis

Recently, an alternative pathway for factor XI activation has been described in which factor XI is activated by thrombin. Patients with a factor XI deficiency bleed mostly from tissues with high local fibrinolytic activity. Therefore, the role of thrombin-mediated factor XI activation in both fibrin formation and fibrinolysis was studied in a plasma system. Clotting was induced by the addition of tissue factor or thrombin to recalcified plasma in the presence or absence of tissue- type plasminogen activator, after which clot formation and lysis were measured using turbidimetry. Thrombin-mediated activation of factor XI was found to take place in plasma under physiologic conditions in the absence of a dextran sulfate-like cofactor. At high tissue factor concentrations, no effect of factor XI was seen on the rate of fibrin formation. Decreasing amounts of tissue factor resulted in a gradually increasing contribution of factor XI to the rate of fibrin formation. In addition, thrombin-mediated factor XI activation resulted in an inhibition of tissue-type plasminogen activator-induced lysis of the clot. This inhibition occurred even at tissue factor concentrations at which no effect of factor XI was observed on fibrin formation. Trace amounts of activated factor XI (1.25 pmol/L, representing 0.01% activation) were capable of completely inhibiting fibrinolysis in our system. The inhibitory effect was found to be mediated by thrombin that is additionally generated in a factor XI-dependent manner via the intrinsic pathway and is capable of protecting the clot against lysis. We also observed that formation of additional thrombin continued after the clot had been formed. We conclude that thrombin-mediated factor XI activation can take place in plasma. The presence of factor XI during coagulation results in the formation of additional thrombin within the clot capable of protecting this clot from fibrinolytic attack. The large amounts of thrombin that are formed by the intrinsic pathway via factor XI may play an important role in the procoagulant and thrombogenic state of clots and may therefore have important clinical and therapeutic implications.     

Mechanism of action of factor VIIa in the treatment of coagulopathies

Recombinant factor VIIa (rFVIIa) has been developed for treatment of bleeding in patients with hemophilia who have inhibitors against factor VIII (FVIII) or FIX, and has been found to induce hemostasis during major orthopedic surgery. The use of rFVIIa treatment for hemophilia is a new concept and is based on the low-affinity binding of FVIIa to the surface of thrombin-activated platelets. Administration of pharmacologic doses of exogenous rFVIIa enhances thrombin generation on the platelet surface at the site of injury independently of the presence of FVIII or FIX. Pharmacologic doses of rFVIIa induce hemostasis not only in hemophilia patients, but also in patients with thrombocytopenia, functional platelet defects, and with profuse bleeding triggered by extensive surgery or trauma. The general mechanism of action of rFVIIa to induce hemostasis under these conditions may be its capacity to generate a tight fibrin hemostatic plug through increased thrombin generation. A tight fibrin plug will aid in resisting the overwhelming local release of fibrinolytic activity triggered by vast tissue damage occurring in extensive trauma. Local fibrinolytic activity also occurs in the gastrointestinal tract as well as during profuse postpartum bleeding. Pharmacologic doses of rFVIIa induce hemostasis in these cases also.     

Thrombin generation and fibrinolysis in anti‐factor IX treated blood and plasma spiked with factor VIII inhibitor bypassing activity or recombinant factor VIIa

Summary. Activated prothrombin complex concentrates (aPCC) and recombinant activated factor VIIa (rFVIIa) are two important therapies in haemophilia patients with inhibitors and improve clot stability. We hypothesized that potential differences in procoagulant and fibrinolytic actions of aPCC and rFVIIa may lie in the clot stability against fibrinolytic activation. We used thrombin generation, fluorescence detection and thromboelastometry in anti‐factor IXa (FIXa) aptamer‐treated whole blood (WB) and plasma to evaluate: (i) generation of thrombin and activated factor X (FXa) and (ii) viscoelastic properties of blood clots in the presence of tissue plasminogen activator (tPA) after addition of aPCC (0.4 U mL^?1) or rFVIIa (60 nm ). Peak thrombin generation increased from 85 ± 19 nm in aptamer‐treated plasma to 276 ± 83 nm and 119 ± 22 nm after addition of aPCC and rFVIIa respectively (P < 0.001). FXa activity increased within 20 min by 87 ± 6% and by 660 ± 97% after addition of aPCC and rFVIIa respectively (P < 0.001). TPA‐induced lysis time increased from 458 ± 378 s in aptamer‐treated WB to 1597 ± 366 s (P = 0.001) and 1132 ± 214 s (P = 0.075), after addition of aPCC and rFVIIa respectively. In this haemophilia model using the anti‐FIXa aptamer, the larger amount of thrombin was generated with aPCC compared with rFVIIa, while FXa generation was more rapidly increased in the presence of rFVIIa. Furthermore, clot formation in anti‐FIXa aptamer‐treated WB was less susceptible to tPA‐induced fibrinolysis after adding aPCC compared with rFVIIa.     

Evaluation of the overall haemostatic effect of recombinant factor VIIa by measuring thrombin generation and stability of fibrin clots

Summary. It has been reported that thrombin generation test (TGT) may be a useful tool to monitor recombinant factor VIIa (rFVIIa). However, TGT does not reflect the stability of fibrin clot and its resistance to fibrinolysis which are crucial. Using whole‐blood thromboelastography (TEG) and tissue plasminogen activator (tPA), we developed an in‐vitro model to assess fibrin clot stability. Fibrin fibres were thicker in haemophiliacs compared with controls (P < 0.0001). After addition of rFVIIa 90 μg kg^?1, the diameter of fibrin fibres was dramatically decreased (P = 0.006). TEG‐tPA assay showed a dose‐dependent improvement of clot stability in the presence of rFVIIa. These data demonstrate a significant correlation between fibrin clot structure and its stability (P = 0.001). We also showed a correlation between thrombin generating capacity and clot resistance to fibrinolysis. Despite this overall correlation, a relatively large spreading around a general trend was observed, suggesting that the two assays bring complementary information on the haemostatic effect of rFVIIa.     

Factor XIIa regulates the structure of the fibrin clot independently of thrombin generation through direct interaction with fibrin

Recent data indicate an important contribution of coagulation factor (F)XII to in vivo thrombus formation. Because fibrin structure plays a key role in clot stability and thrombosis, we hypothesized that FXII(a) interacts with fibrin(ogen) and thereby regulates clot structure and function. In plasma and purified system, we observed a dose-dependent increase in fibrin fiber density and decrease in turbidity, reflecting a denser structure, and a nonlinear increase in clot stiffness with FXIIa. In plasma, this increase was partly independent of thrombin generation, as shown in clots made in prothrombin-deficient plasma initiated with snake venom enzyme and in clots made from plasma deficient in FXII and prothrombin. Purified FXII and α-FXIIa, but not β-FXIIa, bound to purified fibrinogen and fibrin with nanomolar affinity. Immunostaining of human carotid artery thrombi showed that FXII colocalized with areas of dense fibrin deposition, providing evidence for the in vivo modulation of fibrin structure by FXIIa. These data demonstrate that FXIIa modulates fibrin clot structure independently of thrombin generation through direct binding of the N-terminus of FXIIa to fibrin(ogen). Modification of fibrin structure by FXIIa represents a novel physiologic role for the contact pathway that may contribute to the pathophysiology of thrombosis.     

Incorporation of fibrin molecules containing fibrinopeptide A alters clot ultrastructure and decreases permeability

Previous studies have shown that a heterozygous mutation in the fibrinogen Aalpha chain gene, which results in an Aalpha R16C substitution, causes fibrinolytic resistance in the fibrin clot. This mutation prevents thrombin cleavage of fibrinopeptide A from mutant Aalpha R16C chains, but not from wild-type Aalpha chains. However, the mechanism underlying the fibrinolytic resistance is unclear. Therefore, this study investigated the biophysical properties of the mutant fibrin that contribute to fibrinolytic resistance. Fibrin clots made from the mutant fibrinogen incorporated molecules containing fibrinopeptide A into the polymerised clot, which resulted in a 'spiky' clot ultrastructure with barbed fibrin strands. The clots were less stiff than normal fibrin and were cross-linked slower by activated FXIII, but had an increased average fiber diameter, were more dense, had smaller pores and were less permeable. Protein sequencing showed that unclottable fibrinogen remaining in the supernatant consisted entirely of homodimeric Aalpha R16C fibrinogen, whereas both cleaved wild-type alpha chains and uncleaved Aalpha R16C chains were in the fibrin clot. Therefore, fibrinolytic resistance of the mutant clots is probably a result of altered clot ultrastructure caused by the incorporation of fibrin molecules containing fibrinopeptide A, resulting in larger diameter fibers and decreased permeability to fibrinolytic enzymes.     

Recombinant factor VIIa: its background, development and clinical use

PURPOSE OF REVIEW: To examine the development of recombinant FVIIa (rFVIIa); a new concept of inducing hemostasis. It was developed for use in hemophilia patients with inhibitors against FVIII or FIX with the vision to provide these patients with a therapeutical option to be used instead of FVIII or FIX. For the first time it was shown that pharmacological doses of FVIIa induced hemostasis. RECENT FINDINGS: Hemostasis was achieved by rFVIIa in major surgery (repeated doses) as well as in a home-treatment setting (one single injection) in severe hemophilia patients with inhibitors. A recent study indicates that rFVIIa may be useful as prophylaxis. In heavily bleeding nonhemophilia patients rFVIIa was shown to induce hemostasis. Pharmacological doses of rFVIIa enhance thrombin generation on activated platelets resulting in the formation of tight hemostatic fibrin plugs resistant against premature proteolysis. High doses of rFVIIa seem to be safe probably due to its localized effect. SUMMARY: Pharmacological doses of rFVIIa induce hemostasis in severe hemophilia and in nonhemophilia patients with profuse, heavy bleeding. rFVIIa enhances thrombin generation on activated platelets, thereby initiating the formation of strong, tight fibrin hemostatic plugs resistant to premature lysis. It also seems to be safe in high doses.     

Effect of recombinant factor VIIa variant (NN1731) on platelet function, clot structure and force onset time in whole blood from healthy volunteers and haemophilia patients

NN1731 is a novel variant of recombinant factor VIIa (rFVIIa) that binds to activated platelets, but has greater enzymatic activity than rFVIIa in generating FXa and thrombin. The effect of NN1731 on clot structure and platelet function was characterized ex vivo in whole blood from healthy volunteers and haemophilic patients. Blood samples from six healthy volunteers, nine haemophilia A patients with and without inhibitors and one acquired haemophilia A patient, were spiked with increasing concentrations (0.32, 0.64 and 1.28 microg mL(-1)) of rFVIIa and NN1731. Platelet contractile force (PCF) or platelet function, clot elastic modulus (CEM) or clot structure, and force onset time (FOT) or the thrombin generation time (TGT) were determined using the Hemodyne Hemostasis Analysis System (HAS). Baseline PCF, CEM and FOT values in patients were abnormal compared to healthy volunteers' baseline values. Overall, haemophilia blood samples with or without inhibitors spiked with NN1731 had significantly greater PCF, CEM and shorter FOT values relative to samples spiked with corresponding doses of rFVIIa. The variability in response to treatment between patients was greater with rFVIIa compared to NN1731. At 1.28 microg mL(-1) (90 microg kg(-1)), NN1731 normalized PCF, CEM and FOT in nine of 10 patients, while rFVIIa normalized these parameters in four of 10 patients. Increasing in vitro concentrations of NN1731 normalized platelet function, clot structure and thrombin generation consistently in haemophilia blood with or without inhibitors. NN1731 may be a promising haemostatic agent for patients with bleeding disorders. These results should be confirmed in an in vivo study.     

Fibrin clots obtained from plasma containing heparin show a higher sensitivity to t-PA-induced lysis.

Although heparin is currently used in concomitance with thrombolytic agents to improve their efficacy, its effect on fibrinolysis is controversial. We have evaluated the sensitivity to t-PA-induced lysis of clots prepared from plasma preincubated in vitro with therapeutic concentrations of heparin. The extent of t-PA-induced lysis was significantly increased by preincubation of plasma with 0.5 and 1.0 U/ml heparin. The concentration of t-PA required to give similar lysis rates were reduced by up to five times after adding 1.0 U/ml heparin to plasma prior to clot formation. Heparin added to the t-PA-containing medium after clot formation did not exert any significant effect. The effect of heparin was not mediated by the inhibition of thrombin as preincubation of plasma with hirudin did not modify clot sensitivity to t-PA. We also found that heparin significantly modified fibrin assembly and clot structure as assessed by a turbidimetric assay. Pre-incubation of fibrinogen with heparin caused an increase in the speed of fibrin fibre polymerization and in the turbidity of the final fibrin gel; changes known to be associated with the formation of thicker fibrin fibres. Thus the effect of heparin on clot sensitivity to lysis appears to be due to an increased permeability of these clots to fibrinolytic components. This may contribute to the antithrombotic activity and to the haemorrhagic risk of heparin. These findings could be particularly important for clinical thrombolysis.(ABSTRACT TRUNCATED AT 250 WORDS)     

Role of blood coagulation factor XI in downregulation of fibrinolysis

Factor XI is a component of the intrinsic pathway of coagulation. A deficiency of factor XI is associated with a mild to moderate bleeding disorder especially from tissues with a high local fibrinolytic activity. In contrast, high levels of factor XI are a risk factor for venous thrombosis. The recent finding that factor XI can be activated by thrombin led to a revised model of coagulation. In this model the primary thrombin generation that results in fibrin formation takes place via the extrinsic pathway. Additional thrombin generation takes place inside the fibrin clot via the intrinsic pathway after the activation of factor XI by thrombin. High concentrations of thrombin are formed that are necessary for the activation of thrombin activatable fibrinolysis inhibitor (TAFI). Activated TAFI protects the fibrin clot against lysis. The role of factor XI in hemostasis can therefore be seen as a combination of procoagulant and antifibrinolytic actions. The new insights in the role of factor XI in coagulation and fibrinolysis may lead to new strategies for the treatment of thrombotic disorders.     

Homophenotypic Aalpha R16H fibrinogen (Kingsport): uniquely altered polymerization associated with slower fibrinopeptide A than fibrinopeptide B release.

We detail for the first time the uniquely altered fibrin polymerization of homophenotypic Aalpha R16H dysfibrinogen. By polymerase chain reaction amplification and DNA sequencing, our new proposita's genotype consisted of a G>A transition encoding for Aalpha R16H, and an 11 kb Aalpha gene deletion. High-performance liquid chromatography disclosed fibrinopeptide A release approximately six times slower than its fibrinopeptide B. Turbidimetric analyses revealed unimpaired fibrin repolymerization, and abnormal thrombin-induced polymerization (1-7 mumol/l fibrinogen, > 96% coagulable), consisting of a prolonged lag time, slow rate, and abnormal clot turbidity maxima, all varying with thrombin concentration. For example, at 0.2-3 U/ml, the resulting turbidity maxima ranged from lower to higher than normal control values. By scanning electron microscopy, clots formed by 0.3 and 3 thrombin U/ml displayed mean fibril diameters 42 and 254% of the respective control values (n = 400). Virtually no such differences from control values were demonstrable, however, when clots formed in the presence of high ionic strength (micro = 0.30) or of monoclonal antibeta(15-42)IgG. The latter also prolonged the thrombin clotting time approximately three-fold. Additionally, thrombin-induced clots displayed decreased elastic moduli, with G' values of clots induced by 0.3, 0.7 and 3 thrombin U/ml corresponding to 11, 34, and 45% of control values. The results are consistent with increased des-BB fibrin monomer generation preceding and during polymerization. This limited the inherent gelation delay, decreased the clot stiffness, and enabled a progressively coarser, rather than finer, network induced by increasing thrombin concentrations. We hypothesize that during normal polymerization these constitutive des-BB fibrin monomer properties attenuate their des-AA fibrin counterparts.     

Successful use of recombinant activated FVII and aminocaproic acid in four neonates with life-threatening hemorrhage.

Reports on the use of recombinant activated factor VII (rFVIIa) to counteract hemorrhagic shock in neonates and preterm infants are increasing. rFVIIa enhances thrombin generation in situations with impaired thrombin formation and, since thrombin has a crucial role in providing hemostasis, rFVIIa is regarded as a general hemostasis agent. Full thrombin generation is necessary for the formation of a stable fibrin plug resistant to premature fibrinolysis. Antifibrinolytic drugs are not recommended for the treatment of acute bleeding. We report four neonates (one with massive postsurgical hemorrhage after ileostomy and three with severe pulmonary hemorrhage in the course of mechanical ventilation for meconium aspiration syndrome, congenital heart disease and during postoperative resuscitation after cardiac surgery for congenital heart disease) who were successfully treated with multiple administration of rFVIIa (120 microg/kg per dose) and antifibrinolytic therapy - aminocaproic acid (100 mg/kg per dose). In a fibrinolytic environment therapeutic concentrations of rFVIIa may sometimes be insufficient to produce adequate amounts of thrombin necessary for stable clot structure. Laboratory data in three of our patients with pulmonary hemorrhage (low fibrinogen levels with slightly prolonged prothrombin time) supported this thesis, so we blocked fibrinolysis with aminocaproic acid and achieved a complete clinical and laboratory therapeutic effect.     

Manipulation of prothrombin concentration improves response to high-dose factor VIIa in a cell-based model of haemophilia

Clinical reports suggest that treatment regimens employing both activated prothrombin complex concentrates (aPCCs) and recombinant activated factor VII (rFVIIa) may control the bleeding in patients with haemophilia who fail to respond to either agent alone. We hypothesised that increased concentrations of prothrombin, as may be observed after the infusion of aPCCs, favourably influence parameters of thrombin generation in haemophilia treated with high-dose rFVIIa. We examined the effect of varied prothrombin and rFVIIa concentrations on thrombin generation in a model of haemophilia. At all concentrations of rFVIIa, increased prothrombin concentrations led to increases in the peak and rate of thrombin generation. In assays with the highest concentrations of prothrombin and rFVIIa, peak thrombin actually equalled that measured in the model of normal haemostasis. The significant impact of prothrombin concentration on the effect of rFVIIa in vitro may explain the improved haemostasis reported with concurrent use of aPCCs and rFVIIa. These results imply that persons with plasma prothrombin levels at either end of the 'normal' range could have significantly different responses to similar rFVIIa doses. Furthermore, these results suggest that increasing plasma prothrombin concentration prior to rFVIIa administration may offer advantages over the use of rFVIIa alone in the treatment of haemophilic bleeding.     

Effect of hirudin on tissue plasminogen activator induced clot lysis

The effect of recombinant hirudin in the in vitro tPA fibrinolytic and thrombolytic activity was investigated. The activity was evaluated by following lysis of radiolabelled fibrin or plasma clot formed in the presence of tPA alone or with hirudin. The results obtained indicate that increasing concentrations of hirudin had a potentiating effect, with faster clot lysis rates and reduced time to complete lysis. However, when radiolabelled plasma or whole-blood clots were immersed in autologous plasma in the presence of tPA and hirudin, no significant difference in the lysis rates and time to complete lysis was observed. The findings suggest that hirudin or hirudin-thrombin complex interferes with the forming fibrin, thereby making clots more susceptible to lysis, while the presence of hirudin in the surrounding medium during lysis of formed clots helps to rapidly neutralize active thrombin released during clot lysis, thereby preventing further activation of coagulation. Thus, use of hirudin as an anticoagulant during thrombolytic therapy may prove to be helpful in reducing the incidence of reocclusion.     

Clot lysis phenotype and response to recombinant factor VIIa in plasma of haemophilia A inhibitor patients

Recombinant activated factor VII (rFVIIa) is a haemostatic agent that is used for the treatment of haemophilia A patients with inhibitors. However, clinical response to rFVIIa is variable and unpredictable with currently available assays. We investigated the anti‐fibrinolytic effects of rFVIIa in relation to thrombin generation (TG) and other haemostatic parameters in haemophilia A patients with inhibitors. After addition of rFVIIa to plasma, the clot‐lysis assay, TF‐dependent TG, TF‐independent TG and parameters involved in coagulation, anticoagulation and fibrinolysis were assessed. The clot‐lysis test distinguished two groups of patients: a group with a normal and a group with impaired anti‐fibrinolytic response to rFVIIa. Our results showed a dose‐dependent increase in TF‐dependent TG and TF‐independent TG in all individuals. There was a significant difference in TF‐independent TG parameters between the normal and impaired response groups. In addition, there was a difference between the normal and impaired response group in prothrombin time, which could be explained by significantly higher levels of coagulation factors in the normal response group, and soluble thrombomodulin. In conclusion, we observed different in vitro responses following rFVIIa addition in plasma of patients with haemophilia A and inhibitors, which could be partially attributed to levels of procoagulant proteins and soluble thrombomodulin.