Assessment of Bone Fragility in Patients With Multiple Myeloma Using QCT‐Based Finite Element Modeling

Multiple myeloma (MM) is a malignant plasma cell disease associated with severe bone destruction. Surgical intervention is often required to prevent vertebral body collapse and resulting neurological complications; however, its necessity is determined by measuring lesion size or number, without considering bone biomechanics. Finite element (FE) modeling, which simulates the physiological loading, may improve the prediction of fragility. To test this, we developed a quantitative computed tomography (QCT)‐based FE model of the vertebra and applied it to a dataset of MM patients with and without prevalent fracture. FE models were generated from vertebral QCT scans of the T₁₂ (T₁₁ if T₁₂ was fractured) of 104 MM patients, 45 with fracture and 59 without, using a low‐dose scan protocol (1.5 mm slice thickness, 4.0 to 6.5 mSv effective dose). A calibration phantom enabled the conversion of the CT Hounsfield units to FE material properties. Compressive loading of the vertebral body was simulated and the stiffness, yield load, and work to yield determined. To compare the parameters between fracture and nonfracture groups, t tests were used, and standardized odds ratios (sOR, normalized to standard deviation) and 95% confidence intervals were calculated. FE parameters were compared to mineral and structural parameters using linear regression. Patients with fracture showed lower vertebral stiffness (–15.2%; p = 0.010; sOR = 1.73; 95% CI, 1.11 to 2.70), yield force (–21.5%; p = 0.002; sOR = 2.09; 95% CI, 1.27 to 3.43), and work to yield (–27.4%; p = 0.001; sOR = 2.28; 95% CI, 1.33 to 3.92) compared to nonfracture patients. All parameters correlated significantly with vBMD (stiffness: R² = 0.57, yield force: R² = 0.59, work to yield: R² = 0.50, p < 0.001), BV/TV (stiffness: R² = 0.56, yield force: R² = 0.58, work to yield: R² = 0.49, p < 0.001), and Tb.Sp (stiffness: R² = 0.51, yield force: R² = 0.53, work to yield: R² = 0.45, p < 0.001). FE modeling identified MM patients with compromised mechanical integrity of the vertebra. Higher sOR values were obtained for the biomechanical compared to structural or mineral measures, suggesting that FE modeling improves fragility assessment in these patients. © 2016 American Society for Bone and Mineral Research.     

Trabecular Bone Architecture in the Distal Radius Using Magnetic Resonance Imaging in Subjects with Fractures of the Proximal Femur

To determine whether magnetic resonance (MR)-derived measures of trabecular bone architecture in the distal radius are predictive for prevalent hip fractures, 20 subjects with hip fractures and 19 age-matched postmenopausal controls were studied. Bone mineral density (BMD) measures at the hip (dual-energy X-ray absorptiometry, DXA) and the distal radius (peripheral quantitative computed tomography, pQCT) were also obtained. We compared the MR-based structural measures derived in the radius with those in the calcaneus of the same patients. In the radius, images were acquired at an in-plane resolution of 156 μm and a slice thickness of 0.5 mm. Stereologic measures such as the apparent trabecular thickness (app. Tb.Th), fractional trabecular bone volume (app. BV/TV), trabecular spacing (app. Tb.Sp) and trabecular number (app. Tb.N) were derived from the images. Measures of app. Tb.Sp and app. Tb.N in the distal radius showed significant (p<0.05) differences between the two groups, as did hip BMD measures. However, radial trabecular BMD measures showed only a marginal difference (p= 0.05). Receiver operating curve analysis was used to determine the diagnostic efficacy of BMD, structural measures and a combination of the two. The area under the curve (AUC) for total hip BMD was 0.73, and for radial trabecular BMD was 0.69. AUC for most of the measures of trabecular bone structure at the distal radius was lower than for hip BMD measures; however, AUC for app. Tb.N at the radius was 0.69, comparable to trabecular BMD using pQCT. The AUC for combined BMD (hip) and structure measures was higher (0.87) when radius and calcaneus structure was included. Measures of trabecular architecture derived from MR images combined with BMD measures improve the discrimination between subjects with hip fractures and normal age-matched controls. Received: 22 December 1998 / Accepted: 12 February 1999     

Image-Based Assessment of Spinal Trabecular Bone Structure from High-Resolution CT Images

The goal of this study was to assess whether a high-resolution CT measure of trabecular bone structure can enhance the discrimination between subjects with or without a vertebral fracture and having overall low hip or spine bone mineral density (BMD) by dual-energy X-ray absorptiometry (DXA). Sixty-one women with low BMD by DXA (T-score <–2.5 at hip or spine) were examined. Twenty women had sustained a vertebral fracture. Quantitative CT (QCT) BMD and high-resolution CT spinal scans were performed on a whole-body CT scanner. For the high-resolution images (0.31 mm pixel, 1.5 mm thick slice), trabecular bone was segmented from marrow using an adaptive threshold, region growth and skeletonization step. From the processed image we measured the apparent trabecular bone fraction (BV/TV), apparent trabecular thickness (I.Th) and apparent trabecular spacing (I.Sp). We also assessed the connectivity of the marrow space using region growing to derive a mean (H_A) and maximum (H_M) hole size. Despite the fact that the study population was preselected to have a low BMD by DXA, QCT BMD was highly associated with (p <0.005) with fracture status. All structural parameters were correlated (r ~ 0.64 to 0.79) with BMD with p <0.003 and showed significant differences between the fracture and non-fracture group. However, except for H_A, this difference did not remain significant after adjustment for BMD. When BMD and then H_A was entered into a paired linear regression model to predict fracture outcome, H_A contributed with p= 0.03 and BMD with p= 0.86. ROC analysis was applied and showed that H_A, BMD, I.Th and I.Sp discriminated the two groups with areas of 0.76, 0.75, 0.71 and 0.68, respectively. These findings suggest that an assessment of vertebral trabecular structure from high-resolution CT images is useful in discriminating subjects with vertebral fractures and potentially useful for predicting future fractures. Received: 10 October 1997 / Accepted: 4 December 1997     

Bone Microarchitecture Assessed by HR‐pQCT as Predictor of Fracture Risk in Postmenopausal Women: The OFELY Study

Several cross‐sectional studies have shown that impairment of bone microarchitecture contributes to skeletal fragility. The aim of this study was to prospectively investigate the prediction of fracture (Fx) by bone microarchitecture assessed by high‐resolution peripheral computed tomography (HR‐ pQCT) in postmenopausal women. We measured microarchitecture at the distal radius and tibia with HR‐pQCT in the OFELY study, in addition to areal BMD with dual‐energy X‐ray absorptiometry (DXA) in 589 women, mean ± SD age 68 ± 9 years. During a median [IQ] 9.4 [1.0] years of follow‐up, 135 women sustained an incident fragility Fx, including 81 women with a major osteoporotic Fx (MOP Fx). After adjustment for age, women who sustained Fx had significantly lower total and trabecular volumetric densities (vBMD) at both sites, cortical parameters (area and thickness at the radius, vBMD at the tibia), trabecular number (Tb.N), connectivity density (Conn.D), stiffness, and estimated failure load at both sites, compared with control women. After adjustment for age, current smoking, falls, prior Fx, use of osteoporosis‐related drugs, and total hip BMD, each quartile decrease of several baseline values of bone microarchitecture at the radius was associated with significant change of the risk of Fx (HR of 1.39 for Tb.BMD [p = 0.001], 1.32 for Tb.N [p = 0.01], 0.76 for Tb.Sp.SD [p = 0.01], 1.49 [p = 0.01] for Conn.D, and 1.27 for stiffness [p = 0.02]). At the tibia, the association remained significant for stiffness and failure load in the multivariate model for all fragility Fx and for Tt.BMD, stiffness, and failure load for MOP Fx. We conclude that impairment of bone microarchitecture—essentially in the trabecular compartment of the radius—predict the occurrence of incident fracture in postmenopausal women. This assessment may play an important role in identifying women at high risk of fracture who could not be adequately detected by BMD measurement alone, to benefit from a therapeutic intervention. © 2017 American Society for Bone and Mineral Research.     

Prediction of new clinical vertebral fractures in elderly men using finite element analysis of CT scans

Vertebral strength, as estimated by finite element analysis of computed tomography (CT) scans, has not yet been compared against areal bone mineral density (BMD) by dual‐energy X‐ray absorptiometry (DXA) for prospectively assessing the risk of new clinical vertebral fractures. To do so, we conducted a case‐cohort analysis of 306 men aged 65 years and older, which included 63 men who developed new clinically‐identified vertebral fractures and 243 men who did not, all observed over an average of 6.5 years. Nonlinear finite element analysis was performed on the baseline CT scans, blinded to fracture status, to estimate L1 vertebral compressive strength and a load‐to‐strength ratio. Volumetric BMD by quantitative CT and areal BMD by DXA were also evaluated. We found that, for the risk of new clinical vertebral fracture, the age‐adjusted hazard ratio per standard deviation change for areal BMD (3.2; 95% confidence interval [CI], 2.0–5.2) was significantly lower (p < 0.005) than for strength (7.2; 95% CI, 3.6–14.1), numerically lower than for volumetric BMD (5.7; 95% CI, 3.1–10.3), and similar for the load‐to‐strength ratio (3.0; 95% CI, 2.1–4.3). After also adjusting for race, body mass index (BMI), clinical center, and areal BMD, all these hazard ratios remained highly statistically significant, particularly those for strength (8.5; 95% CI, 3.6–20.1) and volumetric BMD (9.4; 95% CI, 4.1–21.6). The area‐under‐the‐curve for areal BMD (AUC = 0.76) was significantly lower than for strength (AUC = 0.83, p = 0.02), volumetric BMD (AUC = 0.82, p = 0.05), and the load‐to‐strength ratio (AUC = 0.82, p = 0.05). We conclude that, compared to areal BMD by DXA, vertebral compressive strength and volumetric BMD consistently improved vertebral fracture risk assessment in this cohort of elderly men. © 2012 American Society for Bone and Mineral Research.     

Effects of Parathyroid Hormone Administration on Bone Strength in Hypoparathyroidism

The microstructural skeletal phenotype of hypoparathyroidism (HypoPT), a disorder of inadequate parathyroid hormone secretion, is altered trabecular microarchitecture with increased trabecular bone volume and thickness. Using 2‐D histomorphometric analysis, we previously found that 2 years of PTH(1‐84) in HypoPT is associated with reduced trabecular thickness (Tb.Th) and an increase in trabecular number (Tb.N). We have now utilized direct 3‐D microstructural analysis to determine the extent to which these changes may be related to bone strength. Iliac crest bone biopsies from HypoPT subjects (n = 58) were analyzed by microcomputed tomography (μCT) and by microfinite element (μFE) analysis. Biopsies were performed at baseline and at 1 or 2 years of recombinant human PTH(1‐84) [rhPTH(1‐84)]. In a subset of subjects (n = 13) at 3 months, we demonstrated a reduction in trabecular separation (Tb.Sp, 0.64 ± 0.1 to 0.56 ± 0.1 mm; p = 0.005) and in the variance of trabecular separation (Tb.SD, 0.19 ± 0.1 to 0.17 ± 0.1 mm; p = 0.01), along with an increase in bone volume/total volume (BV/TV, 26.76 ± 10.1 to 32.83 ± 13.5%; p = 0.02), bone surface/total volume (BS/TV, 3.85 ± 0.7 to 4.49 ± 1.0 mm²/mm³; p = 0.005), Tb.N (1.84 ± 0.5 versus 2.36 ± 1.3 mm^?1; p = 0.02) and Young's modulus (649.38 ± 460.7 to 1044.81 ± 1090.5 N/mm²; p = 0.049). After 1 year of rhPTH(1‐84), Force increased (144.08 ± 102.4 to 241.13 ± 189.1 N; p = 0.04) and Young's modulus tended to increase (662.15 ± 478.2 to 1050.80 ± 824.1 N/m²; p = 0.06). The 1‐year change in cancellous mineralizing surface (MS/BS) predicted 1‐year changes in μCT variables. The biopsies obtained after 2 years of rhPTH(1‐84) showed no change from baseline. These data suggest that administration of rhPTH(1‐84) in HypoPT is associated with transient changes in key parameters associated with bone strength. The results indicate that rhPTH(1‐84) improves skeletal quality in HypoPT early in treatment. © 2016 American Society for Bone and Mineral Research.     

Assessment of incident spine and hip fractures in women and men using finite element analysis of CT scans

Finite element analysis of computed tomography (CT) scans provides noninvasive estimates of bone strength at the spine and hip. To further validate such estimates clinically, we performed a 5‐year case‐control study of 1110 women and men over age 65 years from the AGES‐Reykjavik cohort (case = incident spine or hip fracture; control = no incident spine or hip fracture). From the baseline CT scans, we measured femoral and vertebral strength, as well as bone mineral density (BMD) at the hip (areal BMD only) and lumbar spine (trabecular volumetric BMD only). We found that for incident radiographically confirmed spine fractures (n = 167), the age‐adjusted odds ratio for vertebral strength was significant for women (2.8, 95% confidence interval [CI] 1.8 to 4.3) and men (2.2, 95% CI 1.5 to 3.2) and for men remained significant (p = 0.01) independent of vertebral trabecular volumetric BMD. For incident hip fractures (n = 171), the age‐adjusted odds ratio for femoral strength was significant for women (4.2, 95% CI 2.6 to 6.9) and men (3.5, 95% CI 2.3 to 5.3) and remained significant after adjusting for femoral neck areal BMD in women and for total hip areal BMD in both sexes; fracture classification improved for women by combining femoral strength with femoral neck areal BMD (p = 0.002). For both sexes, the probabilities of spine and hip fractures were similarly high at the BMD‐based interventional thresholds for osteoporosis and at corresponding preestablished thresholds for “fragile bone strength” (spine: women ≤ 4500 N, men ≤ 6500 N; hip: women ≤ 3000 N, men ≤ 3500 N). Because it is well established that individuals over age 65 years who have osteoporosis at the hip or spine by BMD criteria should be considered at high risk of fracture, these results indicate that individuals who have fragile bone strength at the hip or spine should also be considered at high risk of fracture. © 2014 American Society for Bone and Mineral Research.     

Ultrasound-Based Estimates of Cortical Bone Thickness and Porosity Are Associated With Nontraumatic Fractures in Postmenopausal Women: A Pilot Study

Recent ultrasound (US) axial transmission techniques exploit the multimode waveguide response of long bones to yield estimates of cortical bone structure characteristics. This pilot cross-sectional study aimed to evaluate the performance at the one-third distal radius of a bidirectional axial transmission technique (BDAT) to discriminate between fractured and nonfractured postmenopausal women. Cortical thickness (Ct.Th) and porosity (Ct.Po) estimates were obtained for 201 postmenopausal women: 109 were nonfractured (62.6 ± 7.8 years), 92 with one or more nontraumatic fractures (68.8 ± 9.2 years), 17 with hip fractures (66.1 ± 10.3 years), 32 with vertebral fractures (72.4 ± 7.9 years), and 17 with wrist fractures (67.8 ± 9.6 years). The areal bone mineral density (aBMD) was obtained using DXA at the femur and spine. Femoral aBMD correlated weakly, but significantly with Ct.Th (R = 0.23, p < 0.001) and Ct.Po (R = -0.15, p < 0.05). Femoral aBMD and both US parameters were significantly different between the subgroup of all nontraumatic fractures combined and the control group (p < 0.05). The main findings were that (1) Ct.Po was discriminant for all nontraumatic fractures combined (OR = 1.39; area under the receiver operating characteristic curve [AUC] equal to 0.71), for vertebral (OR = 1.96; AUC = 0.84) and wrist fractures (OR = 1.80; AUC = 0.71), whereas Ct.Th was discriminant for hip fractures only (OR = 2.01; AUC = 0.72); there was a significant association (2) between increased Ct.Po and vertebral and wrist fractures when these fractures were not associated with any measured aBMD variables; (3) between increased Ct.Po and all nontraumatic fractures combined independently of aBMD neck; and (4) between decreased Ct.Th and hip fractures independently of aBMD femur. BDAT variables showed comparable performance to that of aBMD neck with all types of fractures (OR = 1.48; AUC = 0.72) and that of aBMD femur with hip fractures (OR = 2.21; AUC = 0.70). If these results are confirmed in prospective studies, cortical BDAT measurements may be considered useful for assessing fracture risk in postmenopausal women. © 2019 American Society for Bone and Mineral Research.     

Heterogeneity and Spatial Distribution of Intravertebral Trabecular Bone Mineral Density in the Lumbar Spine Is Associated With Prevalent Vertebral Fracture

The spatial heterogeneity in trabecular bone density within the vertebral centrum is associated with vertebral strength and could explain why volumetric bone mineral density (vBMD) exhibits low sensitivity in identifying fracture risk. This study evaluated whether the heterogeneity and spatial distribution of trabecular vBMD are associated with prevalent vertebral fracture. We examined the volumetric quantitative computed tomography (QCT) scans of the L₃ vertebra in 148 participants in the Framingham Heart Study Multidetector CT study. Of these individuals, 37 were identified as cases of prevalent fracture, and 111 were controls, matched on sex and age with three controls per case. vBMD was calculated within 5-mm contiguous cubic regions of the centrum. Two measures of heterogeneity were calculated: (i) interquartile range (IQR); and (ii) quartile coefficient of variation (QCV). Ratios in the spatial distributions of the trabecular vBMD were also calculated: anterior/posterior, central/outer, superior/mid-transverse, and inferior/mid-transverse. Heterogeneity and spatial distributions were compared between cases and controls using Wilcoxon rank sum tests and t tests and tested for association with prevalent fractures with conditional logistic regressions independent of integral vBMD. Prevalent fracture cases had lower mean ± SD integral vBMD (134 ± 38 versus165 ± 42 mg/cm³, p < .001), higher QCV (0.22 ± 0.13 versus 0.17 ± 0.09, p = .003), and lower anterior/posterior rBMD (0.65 ± 0.13 versus 0.78 ± 0.16, p < .001) than controls. QCV was positively associated with increased odds of prevalent fracture (OR 1.61; 95% CI, 1.04 to 2.49; p = .034), but this association was not independent of integral vBMD (p = .598). Increased anterior/posterior trabecular vBMD ratio was associated with decreased odds of prevalent fracture independent of integral vBMD (OR 0.38; 95% CI, 0.20 to 0.71; p = .003). In conclusion, increased trabecular vBMD in the anterior versus posterior centrum, but not trabecular vBMD heterogeneity, was associated with decreased risk of prevalent fracture independent of integral vBMD. Regional measurements of trabecular vBMD could aid in determining the risk and underlying mechanisms of vertebral fracture. © 2019 American Society for Bone and Mineral Research.     

Contribution of Trabecular and Cortical Components to Biomechanical Behavior of Human Vertebrae: An Ex Vivo Study

Whereas there is clear evidence for a strong influence of bone quantity (i.e., bone mass or bone mineral density) on vertebral mechanical behavior, there are fewer data addressing the relative influence of cortical and trabecular bone microarchitecture. The aim of this study was to determine the relative contributions of bone mass, trabecular microarchitecture, and cortical thickness and curvature to the mechanical behavior of human lumbar vertebrae. Thirty‐one L3 vertebrae (16 men, 15 women, aged 75 ± 10 years and 76 ± 10 years, respectively) were obtained. Bone mineral density (BMD) of the vertebral body was assessed by lateral dual energy X‐ray absorptiometry (DXA), and 3D trabecular microarchitecture and anterior cortical thickness and curvature was assessed by micro‐computed tomography (µCT). Then compressive stiffness, work to failure, and failure load were measured on the whole vertebral body. BMD was correlated with compressive stiffness (r = 0.60), failure load (r = 0.70), and work to failure (r = 0.55). Except for the degree of anisotropy, all trabecular and cortical parameters were correlated with mechanical behavior (r = 0.36 to 0.58, p = .05 to .001, and r = 0.36 to 0.61, p = .05 to .0001, respectively). Stepwise and multiple regression analyses indicated that the best predictor of (1) failure load was the combination of BMD, structural model index (SMI), and trabecular thickness (Tb.Th) (R = 0.80), (2) stiffness was the combination of BMD, Tb.Th, and curvature of the anterior cortex (R = 0.82), and (3) work to failure was the combination of anterior cortical thickness and BMD (R = 0.68). Our data imply that measurements of cortical thickness and curvature may enhance prediction of vertebral fragility and that therapies that improve both vertebral cortical and trabecular bone properties may provide a greater reduction in fracture risk. © 2010 American Society for Bone and Mineral Research     

Association of Trabecular Bone Score (TBS) With Incident Clinical and Radiographic Vertebral Fractures Adjusted for Lumbar Spine BMD in Older Men: A Prospective Cohort Study

The association of trabecular bone score (TBS) with incident clinical and radiographic vertebral fractures in older men is uncertain. TBS was estimated from baseline spine dual‐energy X‐ray absorptiometry (DXA) scans for 5831 older men (mean age 73.7 years) enrolled in the Osteoporotic Fractures in Men (MrOS) study. Cox proportional hazard models were used to determine the association of TBS (per 1 SD decrease) with incident clinical vertebral fractures. Logistic regression was used to determine the association between TBS (per 1 SD decrease) and incident radiographic vertebral fracture among the subset of 4309 men with baseline and follow‐up lateral spine radiographs (mean 4.6 years later). We also examined whether any associations varied by body mass index (BMI) category. TBS was associated with a 1.41‐fold (95% confidence interval [CI] 1.23 to 1.63) higher aged‐adjusted odds of incident radiographic fracture, and this relationship did not vary by BMI (p value = 0.22 for interaction term). This association was no longer significant with further adjustment for lumbar spine bone mineral density (BMD; odds ratio [OR] = 1.11, 95% CI 0.94 to 1.30). In contrast, the age‐adjusted association of TBS with incident clinical vertebral fracture was stronger in men with lower BMI (≤ median value of 26.8 kg/m²; hazard ratio [HR] = 2.28, 95% CI 1.82 to 2.87) than in men with higher BMI (> median; HR = 1.60, 95% CI 1.31 to 1.94; p value = 0.0002 for interaction term). With further adjustment for lumbar spine BMD, the association of TBS with incident clinical vertebral fracture was substantially attenuated in both groups (HR = 1.30 [95% CI 0.99 to 1.72] among men with lower BMI and 1.11 [95% CI 0.87 to 1.41] among men with higher BMI). In conclusion, TBS is not associated with incident clinical or radiographic vertebral fracture after consideration of age and lumbar spine BMD, with the possible exception of incident clinical vertebral fracture among men with lower BMI. © 2017 American Society for Bone and Mineral Research.     

New Model-Independent Measures of Trabecular Bone Structure Applied to In Vivo High-Resolution MR Images

Complementing measurements of bone mass with measurements of the architectural status of trabecular bone is expected to improve predictions of fracture risk in osteoporotic patients and improve the assessment of response to drug therapy. With high-resolution MRI the trabecular network can be imaged with 156×156×500 mm³ voxels, sufficient to depict individual trabeculae, albeit with inaccurate thickness. In this work, distance transformation techniques were applied to the three-dimensional image of the distal radius of postmenopausal patients. Structural indices such as trabecular number (app.Tb.N), thickness (app.Tb.Th) and separation (app.Tb.Sp) were determined without model assumptions. A new metric index, the apparent intra-individual distribution of separations (app.Tb.Sp.SD), is introduced. The reproducibility of the MR procedure and structure assessment was determined on volunteers, and the coefficient of variation was found to be 2.7–4.6% for the mean values of structural indices and 7.7% for app.Tb.Sp.SD. The distance transformation methods were then applied to two groups of patients: one of postmenopausal women without vertebral fracture and one of postmenopausal women with at least one vertebral fracture. It was found that app.Tb.Sp.SD discriminates fracture subjects from non-fracture patients as well as dual-energy X-ray absorptiometry (DXA) measurements of the radius and the spine, but not as well as DXA of the hip. Using receiver operating characteristic analysis, the area under the curve (AUC) values were 0.67 for app.Tb.Sp.SD, 0.72 for DXA radius, 0.67 for DXA spine and 0.81 for DXA of the hip. A combination of MR indices reached an AUC of 0.75. Age-adjusted odds ratio ranged from 1.85 to 2.03 for app.Tb.N, app.Tb.Sp and app.Tb.Sp.SD (p<0.003). We conclude that in vivo high-resolution MRI not only has the potential of imaging trabecular bone, but in combination with novel metrics may offer new insight into the structural changes occurring in postmenopausal women. Received: 7 November 2000 / Accepted: 20 August 2001     

Bone quality, as measured by trabecular bone score in patients with adrenal incidentalomas with and without subclinical hypercortisolism

Patients with adrenal incidentalomas (AIs) and subclinical hypercortisolism (SH) have increased risk of fracture independent of bone mineral density (BMD) and possibly due to reduced bone quality. The trabecular bone score (TBS) has been proposed as a index of bone microarchitecture. The aim of the study was to investigate TBS in AI. In 102 AI patients, SH was diagnosed in the presence of at least two of the following: (1) urinary free cortisol >70 µg/24 h (193.1 nmol/L); (2) cortisol after 1‐mg dexamethasone suppression test (1‐mg DST) >3.0 µg/dL (82.8 nmol/L); or (3) adrenocorticotropic hormone (ACTH) <10 pg/mL (<2.2 pmol/L). In patients and in 70 matched controls, BMD was measured at lumbar spine (LS) and femur (neck [FN] and total [FT]) by dual X‐ray absorptiometry and TBS was assessed in the region of LS‐BMD; BMD and TBS data were reported as Z‐scores. In patients, vertebral deformities were assessed by radiograph. Patients with SH (n = 34) had lower LS‐BMD (?0.31 ± 1.17), FT‐BMD (?0.29 ± 0.91), and TBS (?3.18 ± 1.21) than patients without SH (n = 68, 0.31 ± 1.42, p = 0.03; 0.19 ± 0.97, p = 0.01; ?1.70 ± 1.54, p < 0.0001, respectively) and controls (0.42 ± 1.52, p = 0.02; 0.14 ± 0.76, p = 0.02; ?1.19 ± 0.99, p < 0.0001, respectively). TBS was inversely correlated with 1‐mg DST (β = ?0.26, t = ?2.79, p = 0.006) regardless of age, LS‐BMD, body mass index (BMI), and gender. The presence of fracture was associated with low TBS alone (odds ratio [OR], 4.8; 95% confidence interval [CI], 1.85–12.42, p = 0.001) and with the cluster low TBS plus low LS‐BMD (OR, 4.37; 95% CI, 1.71–11.4, p = 0.002), after adjustment for age, BMI, and gender. Low TBS plus low LS‐BMD showed a good specificity (79%) for predicting fractures, whereas normal TBS (ie, > ?1.5) plus normal LS‐BMD high specificity (88.1%) for excluding fractures. Finally, TBS predicted the occurrence of a new fracture in 40 patients followed for 24 months (OR, 11.2; 95%CI, 1.71–71.41, p = 0.012) regardless of LS‐BMD, BMI, and age. In SH, bone quality, as measured by TBS, is altered. TBS is useful in detecting AI patients at risk of fractures. © 2012 American Society for Bone and Mineral Research.     

Current Physical Activity Is Independently Associated With Cortical Bone Size and Bone Strength in Elderly Swedish Women

Physical activity is believed to have the greatest effect on the skeleton if exerted early in life, but whether or not possible benefits of physical activity on bone microstructure or geometry remain at old age has not been investigated in women. The aim of this study was to investigate if physical activity during skeletal growth and young adulthood or at old age was associated with cortical geometry and trabecular microarchitecture in weight‐bearing and non–weight‐bearing bone, and areal bone mineral density (aBMD) in elderly women. In this population‐based cross‐sectional study 1013 women, 78.2 ± 1.6 (mean ± SD) years old, were included. Using high‐resolution 3D pQCT (XtremeCT), cortical cross‐sectional area (Ct.CSA), cortical thickness (Ct.Th), cortical periosteal perimeter (Ct.Pm), volumetric cortical bone density (D.Ct), trabecular bone volume fraction (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp) were measured at the distal (14% level) and ultra‐distal tibia and radius, respectively. aBMD was assessed using DXA (Hologic Discovery A) of the spine and hip. A standardized questionnaire was used to collect information about previous exercise and the Physical Activity Scale for the Elderly (PASE) was used for current physical activity. A linear regression model (including levels of exercise during skeletal growth and young adulthood [10 to 30 years of age], PASE score, and covariates) revealed that level of current physical activity was independently associated with Ct.CSA (β = 0.18, p < 0.001) and Ct.Th (β = 0.15, p < 0.001) at the distal tibia, Tb.Th (β = 0.11, p < 0.001) and BV/TV (β = 0.10, p = 0.001) at the ultra‐distal tibia, and total hip aBMD (β = 0.10, p < 0.001). Current physical activity was independently associated with cortical bone size, in terms of thicker cortex but not larger periosteal circumference, and higher bone strength at the distal tibia on elderly women, indicating that physical activity at old age may decrease cortical bone loss in weight‐bearing bone in elderly women. © 2016 American Society for Bone and Mineral Research.     

Abdominal Aortic Calcification,BMD, and Bone Microstructure: A Population‐Based Study

To better define the relationship between vascular calcification and bone mass/structure, we assessed abdominal aortic calcification (AAC), BMD, and bone microstructure in an age‐stratified, random sample of 693 Rochester, MN, residents. Participants underwent QCT of the spine and hip and high‐resolution pQCT (HRpQCT) of the radius to define volumetric BMD (vBMD) and microstructural parameters. AAC was quantified with the Agatston scoring method. In men, AAC correlated with lower vertebral trabecular and femoral neck vBMD (p < 0.001), but not after age or multivariable (age, body mass index, smoking status) adjustment. Separation into <50 and ≥50 yr showed this pattern only in the older men. BV/TV and Tb.Th inversely correlated with AAC in all men (p < 0.001), and Tb.Th remained significantly correlated after age adjustment (p < 0.05). Tb.N positively correlated with AAC in younger men (p < 0.001) but negatively correlated in older men (p < 0.001). The opposite was true with Tb.Sp (p = 0.01 and p < 0.001, respectively). Lower Tb.N and higher Tb.Sp correlated with AAC in older men even after multivariable adjustment. Among all women and postmenopausal women, AAC correlated with lower vertebral and femoral neck vBMD (p < 0.001) but not after adjustment. Lower BV/TV and Tb.Th correlated with AAC (p = 0.03 and p = 0.04, respectively) in women, but not after adjustment. Our findings support an age‐dependent association between AAC and vBMD. We also found that AAC correlates with specific bone microstructural parameters in older men, suggesting a possible common pathogenesis for vascular calcification and deterioration in bone structure. However, sex‐specific differences exist.     

A comparison of bone quality at the distal radius between Asian and white adolescents and young adults: An HR‐pQCT study

Paradoxically, Asians have lower areal bone mineral density (aBMD), but their rates of hip and wrist fractures are lower than whites. Therefore, we used high‐resolution pQCT (HR‐pQCT) to determine whether differences in bone macrostructure and microstructure, BMD, and bone strength at the distal radius were apparent in Asian (n = 91, 53 males, 38 females, [mean ± SD] 17.3 ± 1.5 years) and white (n = 89, 46 males, 43 females, 18.1 ± 1.8 years) adolescents and young adults. HR‐pQCT outcomes included total BMD (Tt.BMD), trabecular bone volume fraction (BV/TV), and trabecular number (Tb.N), thickness (Tb.Th), and separation (Tb.Sp). We used an automated segmentation algorithm to determine total bone area (Tt.Ar), and cortical BMD (Ct.BMD), porosity (Ct.Po), and thickness (Ct.Th), and we applied finite element (FE) analysis to HR‐pQCT scans to estimate bone strength. We fit sex‐specific multivariable regression models to compare bone outcomes between Asians and whites, adjusting for age, age at menarche (girls), lean mass, ulnar length, dietary calcium intake, and physical activity. In males, after adjusting for covariates, Asians had 11% greater Tt.BMD, 8% greater Ct.BMD, and 25% lower Ct.Po than whites (p < 0.05). Also, Asians had 9% smaller Tt.Ar and 27% greater Ct.Th (p < 0.01). In females, Asians had smaller Tt.Ar than whites (16%, p < 0.001), but this difference was not significant after adjusting for covariates. Asian females had 5% greater Ct.BMD, 12% greater Ct.Th, and 11% lower Tb.Sp than whites after adjusting for covariates (p < 0.05). Estimated bone strength did not differ between Asian and white males or females. Our study supports the notion of compensatory elements of bone structure that sustain bone strength; smaller bones as observed between those of Asian origin compared with white origin have, on average, more dense, less porous, and thicker cortices. Longitudinal studies are needed to determine whether ethnic differences in bone structure exist in childhood, persist into old age, and whether they influence fracture risk.     

Visceral Adipose Tissue Is Associated With Bone Microarchitecture in the Framingham Osteoporosis Study

Obesity has been traditionally considered to protect the skeleton against osteoporosis and fracture. Recently, body fat, specifically visceral adipose tissue (VAT), has been associated with lower bone mineral density (BMD) and increased risk for some types of fractures. We studied VAT and bone microarchitecture in 710 participants (58% women, age 61.3 ± 7.7 years) from the Framingham Offspring cohort to determine whether cortical and trabecular BMD and microarchitecture differ according to the amount of VAT. VAT was measured from CT imaging of the abdomen. Cortical and trabecular BMD and microarchitecture were measured at the distal tibia and radius using high‐resolution peripheral quantitative computed tomography (HR‐pQCT). We focused on 10 bone parameters: cortical BMD (Ct.BMD), cortical tissue mineral density (Ct.TMD), cortical porosity (Ct.Po), cortical thickness (Ct.Th), cortical bone area fraction (Ct.A/Tt.A), trabecular density (Tb.BMD), trabecular number (Tb.N), trabecular thickness (Tb.Th), total area (Tt.Ar), and failure load (FL) from micro–finite element analysis. We assessed the association between sex‐specific quartiles of VAT and BMD, microarchitecture, and strength in all participants and stratified by sex. All analyses were adjusted for age, sex, and in women, menopausal status, then repeated adjusting for body mass index (BMI) or weight. At the radius and tibia, Ct.Th, Ct.A/Tt.A, Tb.BMD, Tb.N, and FL were positively associated with VAT (all p‐trend <0.05), but no other associations were statistically significant except for higher levels of cortical porosity with higher VAT in the radius. Most of these associations were only observed in women, and were no longer significant when adjusting for BMI or weight. Higher amounts of VAT are associated with greater BMD and better microstructure of the peripheral skeleton despite some suggestions of significant deleterious changes in cortical measures in the non–weight bearing radius. Associations were no longer significant after adjustment for BMI or weight, suggesting that the effects of VAT may not have a substantial effect on the skeleton independent of BMI or weight. © 2016 American Society for Bone and Mineral Research.     

Determinants of the mechanical behavior of human lumbar vertebrae after simulated mild fracture

The ability of a vertebra to carry load after an initial deformation and the determinants of this postfracture load‐bearing capacity are critical but poorly understood. This study aimed to determine the mechanical behavior of vertebrae after simulated mild fracture and to identify the determinants of this postfracture behavior. Twenty‐one human L₃ vertebrae were analyzed for bone mineral density (BMD) by dual‐energy X‐ray absorptiometry (DXA) and for microarchitecture by micro–computed tomography (µCT). Mechanical testing was performed in two phases: initial compression of vertebra to 25% deformity, followed, after 30 minutes of relaxation, by a similar test to failure to determine postfracture behavior. We assessed (1) initial and postfracture mechanical parameters, (2) changes in mechanical parameters, (3) postfracture elastic behavior by recovery of vertebral height after relaxation, and (4) postfracture plastic behavior by residual strength and stiffness. Postfracture failure load and stiffness were 11% ± 19% and 53% ± 18% lower than initial values (p = .021 and p < .0001, respectively), with 29% to 69% of the variation in the postfracture mechanical behavior explained by the initial values. Both initial and postfracture mechanical behaviors were significantly correlated with bone mass and microarchitecture. Vertebral deformation recovery averaged 31% ± 7% and was associated with trabecular and cortical thickness (r = 0.47 and r = 0.64; p = .03 and p = .002, respectively). Residual strength and stiffness were independent of bone mass and initial mechanical behavior but were related to trabecular and cortical microarchitecture (|r| = 0.50 to 0.58; p = .02 to .006). In summary, we found marked variation in the postfracture load‐bearing capacity following simulated mild vertebral fractures. Bone microarchitecture, but not bone mass, was associated with postfracture mechanical behavior of vertebrae. © 2011 American Society for Bone and Mineral Research.     

Greater Bone Marrow Adiposity Predicts Bone Loss in Older Women

Bone marrow adiposity (BMA) is associated with aging and osteoporosis, but whether BMA can predict bone loss and fractures remains unknown. Using data from the Age Gene/Environment Susceptibility (AGES)-Reykjavik study, we investigated the associations between ¹H-MRS–based measures of vertebral bone marrow adipose tissue (BMAT), annualized change in bone density/strength by quantitative computed tomography (QCT) and DXA, and secondarily, with incident clinical fractures and radiographic vertebral fractures among older adults. The associations between BMAT and annualized change in bone density/strength were evaluated using linear regression models, adjusted for age, body mass index (BMI), diabetes, estradiol, and testosterone. Cox proportional hazards models were used to evaluate the associations between baseline BMAT and incident clinical fractures, and logistic regression models for incident vertebral fractures. At baseline, mean ± SD age was 80.9 ± 4.2 and 82.6 ± 4.2 years in women (n = 148) and men (n = 150), respectively. Mean baseline BMAT was 55.4% ± 8.1% in women and 54.1% ± 8.2% in men. Incident clinical fractures occurred in 7.4% of women over 2.8 years and in 6.0% of men over 2.2 years. Incident vertebral fractures occurred in 12% of women over 3.3 years and in 17% of men over 2.7 years. Each 1 SD increase in baseline BMAT was associated with a 3.9 mg²/cm⁴/year greater loss of spine compressive strength index (p value = .003), a 0.9 mg/cm³/year greater loss of spine trabecular BMD (p value = .02), and a 1.2 mg/cm³/year greater loss of femoral neck trabecular BMD (p value = .02) in women. Among men, there were no associations between BMAT and changes in bone density/strength. There were no associations between BMAT and incident fractures in women or men. In conclusion, we found greater BMAT is associated with greater loss of trabecular bone at the spine and femoral neck, and greater loss of spine compressive strength, in older women. © 2019 American Society for Bone and Mineral Research.     

Quantitative and Qualitative Changes of Bone in Psoriasis and Psoriatic Arthritis Patients

Psoriatic arthritis (PsA) is a chronic inflammatory disease characterized by periarticular bone loss and new bone formation. Current data regarding systemic bone loss and bone mineral density (BMD) in PsA are conflicting. The aim of this study was to evaluate bone microstructure and volumetric BMD (vBMD) in patients with PsA and psoriasis. We performed HR‐pQCT scans at the ultradistal and periarticular radius in 50 PsA patients, 30 psoriasis patients, and 70 healthy, age‐ and sex‐related controls assessing trabecular bone volume (BV/TV), trabecular number (Tb.N), inhomogeneity of the trabecular network, cortical thickness (Ct.Th), and cortical porosity (Ct.Po), as well as vBMD. Trabecular BMD (Tb.BMD, p = 0.021, 12.0%), BV/TV (p = 0.020, –11.9%), and Tb.N (p = 0.035, 7.1%) were significantly decreased at the ultradistal radius and the periarticular radius in PsA patients compared to controls. In contrast, bone architecture of the ultradistal radius and periarticular radius was similar in patients with psoriasis and healthy controls. Duration of skin disease was associated with low BV/TV and Tb.N in patients with PsA. These data suggest that trabecular BMD and bone microstructure are decreased in PsA patients. The observation that duration of skin disease determines bone loss in PsA supports the concept of subclinical musculoskeletal disease in psoriasis patients. © 2015 American Society for Bone and Mineral Research.