HPLC and chemometric-assisted spectrophotometric methods for simultaneous determination of atenolol, amiloride hydrochloride and chlorthalidone

Three methods are presented for the simultaneous determination of atenolol (AT), amiloride hydrochloride (AM) and chlorthalidone (CD). The high performance liquid chromatographic (HPLC) method depends on the separation of each drug on a reversed phase, RP (18) column. Elution was carried out with a mobile phase consisting of acetonitrile -5mM heptansulphonic acid sodium salt (20:80, v/v, pH 4.4). Quantitation was achieved with UV detection at 274 nm based on peak area. The other two-chemometric-assisted spectrophotometric methods applied were principal component regression (PCR) and partial least squares (PLS-1). These approaches were successfully applied to quantify each drug in the mixture using the information included in the absorption spectra of appropriate solutions in the range 240-290 nm with the intervals Deltalambda=0.2 nm. The three methods were successfully applied to a pharmaceutical formulation (tablets), and the results were compared with each other.     

Application and validation of chemometrics-assisted spectrophotometry and liquid chromatography for the simultaneous determination of six-component pharmaceuticals

Three methods are developed for the simultaneous determination of theophylline anhydrous (TH), guaiphenesin (GP), diphenhydramine hydrochloride (DP), methylparaben (MP), propylparaben (PP) and sodium benzoate (BZ) in pharmaceutical syrup. The chromatographic method depends on a high performance liquid chromatographic separation on a reversed-phase C(18) column at ambient temperature with mobile phase consisting of 25 mM KH2PO4, pH 3.2-acetonitrile (60:40, v/v). Quantitation was achieved with UV detection at 222 nm based on peak area. The other two chemometric methods applied were partial least squares (PLS-1) and principal component regression (PCR). These approaches were successfully applied to quantify the six components in the studied mixture using information included in the UV absorption spectra of appropriate solutions in the wavelength range of 220-270 nm with Deltalambda=0.4 nm. The calibration PLS-1 and PCR models were evaluated by internal validation (prediction of compounds in its own designed training set of calibration), by cross-validation (obtaining statistical parameters that show the efficiency for a calibration fit model) and by external validation over synthetic and pharmaceutical preparation. The results of PLS-1 and PCR methods were compared with the HPLC method and a good agreement was found.     

HPLC and chemometric assisted spectrophotometric methods for simultaneous determination of diprophylline, phenobarbitone and papaverine hydrochloride

Three methods are developed for the simultaneous determination of diprophylline (DP), phenobarbitone (PH) and papaverine hydrochloride (PP). The chromatographic method depends on a high performance liquid chromatographic (HPLC) separation on a reversed-phase C18 column with a mobile phase consisting of 0.02 M potassium dihydrogen phosphate, pH 3.5--acetonitrile (55:45 v/v). Quantitation was achieved with UV detection at 210 nm based on peak area. The other two chemometric methods applied were principal component regression (PCR) and partial least squares (PLS-1). These approaches were successfully applied to quantify the three drugs in the mixture using the information included in the UV absorption spectra of appropriate solutions in the range 215-245 nm with the intervals Delta lambda = 0.2 nm. The calibration PCR and PLS-1 models were evaluated by internal validation (prediction of compounds in its own designed training set of calibration), by cross-validation (obtaining statistical parameters that show the efficiency for a calibration fit model) and by external validation over laboratory-prepared mixtures and pharmaceutical preparations. The PCR and PLS-1 methods require neither any separation step, nor any priori graphical treatment of the overlapping spectra of the three drugs in a mixture. The results of PCR and PLS-1 methods were compared with HPLC method obtained in pharmaceutical formulation and a good agreement was found.     

Method development and validation for the HPLC assay (potency and related substances) for 20 mg paroxetine tablets

A reversed phase high performance liquid chromatographic (HPLC) method was developed and validated for use as a stability indicating assay (potency and related substances) of paroxetine in paroxetine hydrochloride 20 mg tablets. Assay samples were extracted at a paroxetine concentration of 0.4 mg ml(-1) utilizing mobile phase as the extraction solvent. The chromatographic conditions employed a C18 column (Inertsil, 5 microm, 15 cm x 4.6 mm), isocratic elution with 10 mM 1-decane sulfonic acid sodium salt containing 10 mM sodium phosphate monobasic (pH 3.0)-ACN (60:40, v/v) and ultraviolet (UV) detection at 235 nm.     

Stability-indicating HPLC assays for the determination of prilocaine and procaine drug combinations

Stability-indicating, reversed phase high-performance liquid chromatographic (HPLC) methods have been developed for the determination of several procaine hydrochloride and prilocaine hydrochloride combinations. The separation and quantitation of epinephrine-prilocaine and epinephrine-procaine drug combinations were achieved on a phenyl column using a mobile phase of 80:20% v/v 25 mM phosphate buffer (pH 3.0) containing 50 mM heptanesulfonic acid sodium salt-acetonitrile at a flow rate of 1 ml x min(-1) and UV detection at 254 nm. The method showed linearity for the epinephrine and prilocaine hydrochloride mixture in the 0.25-2.5 and 8-200 micro g ml(-1) ranges, respectively. The intra- and inter-day relative standard deviations (RSDs) ranged from 0.26 to 2.05% and 0.04 to 0.61% for epinephrine and prilocaine hydrochloride, respectively. The epinephrine and procaine hydrochloride mixture yielded linear ranges of 0.25-2.0 and 5-100 micro g ml(-1) and intra- and inter-day RSDs ranged from 0.23 to 1.88% and 0.07 to 0.26% for epinephrine and procaine hydrochloride, respectively. The assays were shown to be suitable for measuring epinephrine-prilocaine and epinephrine-procaine combinations in their respective injection dosage forms. Stability-indicating HPLC assays were also developed for several other procaine drug combinations since their monographs are present in the USP 24; however, quantitation was not investigated since these combinations are not commercially available. A mobile phase consisting of 80:20% v/v 25 mM phosphate buffer (pH 3.0) containing 50 mM heptanesulfonic acid-acetonitrile was utilized for the levonordefrin-tetracaine-procaine drug combination, while a mobile phase consisting of 70:30% v/v 25 mM phosphate buffer (pH 3.0) containing 50 mM heptanesulfonic acid sodium salt-acetonitrile was utilized for the separation of levonordefrin-procaine-propoxycaine and norepinephrine-procaine-propoxycaine. All separations were achieved on a phenyl column at a flow rate of 1 ml x min(-1) and UV detection at 254 nm.     

盐酸替扎尼定片溶出度方法的研究与改进

目的 改进盐酸替扎尼定片溶出度方法 .方法 统一溶出度方法 为桨法,以盐酸溶液900 ml为溶出介质,转速为50 r/min;检测方法 由原来的紫外分光光度法改为高效液相色谱法,色谱柱为C18(5μm,4.6 mm×250 mm),流动相为1-戊烷磺酸钠缓冲溶液(取1-戊烷磺酸钠3.5 g,溶于1000 ml水中,用12%磷酸溶液或氢氧化钠试液调节pH至3.0±0.05)-乙腈(80:20),流速为1.0 ml/min,检测波长为230 nm,35℃,进样量为20μl.比较两种方法 测定的样品累积溶出度.结果 盐酸替扎尼定检测质量浓度线性范围为0.5022~5.0225μg/ml(r=1.0000),平均回收率为99.4%,相对标准偏差为0.3%;样品的溶出时间由原来的30 min缩短至15 min.改进方法 测定的盐酸替扎尼定片的累积溶出率高于原方法 .结论 改进方法 提高了盐酸替扎尼定片溶出度检测的专属性和准确性,较好地体现了片剂间的差异.     

白芍的高效液相色谱指纹图谱研究

利用HPLC-DAD方法，研究白芍的高效液相色谱指纹图谱，为科学评价及有效控制其质量提供可靠方法。测定了28批白芍药材样品，并应用LC-MS，MS/MS技术指认指纹图谱共有模式中共有峰的归属。结果表明，28批白芍样品得到的色谱指纹图谱有11个共有峰，并指认了9个峰，分别为(+)-儿茶素，没食子酸甲酯，芍药内酯苷，芍药苷，四没食子酰葡萄糖，没食子酰芍药苷，五没食子酰葡萄糖，牡丹皮苷I和苯甲酰芍药苷。可见，白芍的指纹图谱特征性及专属性强，可结合含量测定用于全面控制白芍的质量。     

Determination of certain drugs in binary mixtures formulations by second derivative ratio spectrophotometry and LC

Spectrophotometric and high-performance liquid chromatographic (HPLC) methods are developed for simultaneous determination of three binary mixtures with overlapping spectra. The spectrophotometric method is based on the use of second derivative of the ratio spectra (2DD) for resolution of three binary mixtures of indapamide with captopril (mixture 1), cinnarizine with heptaminol acefylline (mixture 2) and amoxycillin trihydrate with flucloxacillin sodium (mixture 3). The HPLC method depends on the separation of components of binary mixtures using ODS column with mobile phase consisting of acetonitrile and 5 mM aqueous heptane sulphonic acid sodium salt in ratios of (60:40, v/v, pH 5.5) for mixture 1, (50:50, v/v, pH 3.0) for mixture 2 and (35:65, v/v, pH 4.2) for mixture 3. The proposed methods are accurate, non-destructive and successfully applied for the determination of the three binary combinations in synthetic mixtures and commercial pharmaceutical products.     

First derivative ratio spectrophotometric,HPTLC-densitometric,and HPLC determination of nicergoline in presence of its hydrolysis-induced degradation product

Three methods are presented for the determination of Nicergoline in presence of its hydrolysis-induced degradation product. The first method was based on measurement of the first derivative of ratio spectra amplitude of Nicergoline at 291 nm. The second method was based on separation of Nicergoline from its degradation product followed by densitometric measurement of the spots at 287 nm. The separation was carried out on HPTLC silica gel F(254) plates, using methanol-ethyl acetate-glacial acetic acid (5:7:3, v/v/v) as mobile phase. The third method was based on high performance liquid chromatographic (HPLC) separation and determination of Nicergoline from its degradation product on a reversed phase, nucloesil C(18) column using a mobile phase of methanol-water-glacial acetic acid (80:20:0.1, v/v/v) with UV detection at 280 nm. Chlorpromazine hydrochloride was used as internal standard. Laboratory prepared mixtures containing different percentages of the degradation product were analysed by the proposed methods and satisfactory results were obtained. These methods have been successfully applied to the analysis of Nicergoline in Sermion tablets. The validities of these methods were ascertained by applying standard addition technique, the mean percentage recovery +/- R.S.D.% was found to be 99.47 +/- 0.752, 100.01 +/- 0.940, 99.75 +/- 0.740 for the first derivative of ratio spectra method, the HPTLC method and the HPLC method, respectively. The proposed methods were statistically compared with the manufacturer's HPLC method of analysis of Nicergoline and no significant difference was found with respect to both precision and accuracy. They have the advantage of being stability indicating. Therefore, they can be used for routine analysis of the drug in quality control laboratories.     

First derivative spectrophotometric and high-performance liquid chromatographic determination of cinchocaine hydrochloride in presence of its acid degradation product

Two methods are presented for the determination of cinchocaine HCl in presence of its acid-induced degradation product using first (¹D) derivative spectrophotometry and high-performance liquid chromatography. Cinchocaine HCl was determined by measurement of its first derivative amplitude at the zero crossing point of 2-hydroxyquinoline-4-carboxylic acid diethylaminoethylamide as its acid degradation product (at 333.5 nm). The HPLC method depends upon using a μBondapak C₁₈ column at ambient temperature with a mobile phase consisting of acetonitrile—0.01 M sodium acetate trihydrate (45:55, v/v) containing 0.06% (w/v) heptane sulphonic acid sodium salt and adjusted to apparent pH 4.5 with acetic acid at a flow rate 2 ml min⁻¹. Quantitation was achieved with UV detection at 254 nm based on peak area. The HPLC method was applied for simultaneous determination of cinchocaine HCl, methylparaben and propylparaben. The two proposed methods were successfully applied to the determination of the cinchocaine HCl in laboratory-prepared mixtures in the presence of its acid degradation product and in cream. Moreover, the proposed methods were utilized to investigate the kinetics of the acid degradation process at different temperatures and the apparent pseudo first-order rate constant, half-life and activation energy calculated.     

Comparison of HPLC, UV spectrophotometry and potentiometric titration methods for the determination of lumefantrine in pharmaceutical products

This paper describes the development and evaluation of a HPLC, UV spectrophotometry and potentiometric titration methods to quantify lumefantrine in raw materials and tablets. HPLC analyses were carried out using a Symmetry C(18) column and a mobile phase composed of methanol and 0.05% trifluoroacetic acid (80:20), with a flow rate of 1.0ml/min and UV detection at 335nm. For the spectrophotometric analyses, methanol was used as solvent and the wavelength of 335nm was selected for the detection. Non-aqueous titration of lumefantrine was carried out using perchloric acid as titrant and glacial acetic acid/acetic anhydride as solvent. The end point was potentiometrically determined. The three evaluated methods showed to be adequate to quantify lumefantrine in raw materials, while HPLC and UV methods presented the most reliable results for the analyses of tablets.     

Validation of a HPLC quantification of acetaminophen,phenylephrine and chlorpheniramine in pharmaceutical formulations: capsules and sachets

Acetaminophen, phenylephrine and chlorpheniramine are frequently associated in pharmaceutical formulations against the common cold. Their quantification presents several problems. A HPLC method for the simultaneous determination of these compounds in pharmaceutical formulations such as capsules and sachets, including the separation of impurities and excipients has been developed and validated. The selectivity of the method was also tested to be used if phenylpropanolamine hydrochloride were employed instead of phenylephrine. Final chromatographic conditions were a gradient elution, being solvent A: phosphate buffer 40 mM at pH 6.0 and solvent B: acetonitrile. At t=0, the mobile phase consisted of 92% A and 8% B and it changed with a linear gradient during 8 min to 75% A and 25% B. At min 8, it changed to 30% A and 70% B for 5 min and at t=15 min, it returns to the initial conditions (92% A and 8% B) during 1 min remaining at this composition until t=20 min. UV detection was performed at 215 nm for phenylephrine and chlorpheniramine, because at this wavelength sensitivity was higher than in other more characteristic wavelengths and it was necessary for the detection of minor compounds. For acetaminophen 280 nm was employed. Validation parameters permit to consider the method adequate.     

Simultaneous Estimation of Nebivolol Hydrochloride and Valsartan using RP HPLC

In this study, a rapid, precise, accurate, specific and sensitive ion-paired reverse phase liquid chromatographic method has been developed for the simultaneous estimation of nebivolol hydrochloride and valsartan in their capsule formulation. The chromatographic method was standardized using a HIQ sil C₁₈ column (250×4.6 mm i.d., 5 μm particle size) with UV detection at 289 nm and flow rate of 1 ml/min. The mobile phase consisting of methanol:water (80:20 v/v) with addition of 0.1 percent 1-hexanesulfonic acid monohydrate sodium salt as an ion-pairing reagent was selected. The method was validated and produced accurate and precise results for estimation of the two drugs.     

High performance liquid chromatographic determination of some co-administered anticancer drugs in pharmaceutical preparations and in spiked human plasma

Two HPLC methods are introduced in this paper for the simultaneous determination of doxorubicin hydrochloride (DOX) and 5-fluorouracil (5-FU), combination I, and of cytarabine (CYT) and etoposide (ETO), combination II, as co-administered drugs. In both combinations, a 250 mm×4.6 mm C-18 column is used. The mobile phase for combination I consists of a mixture of acetonitrile and 0.05 M disodium hydrogenphosphate (50:50, v/v) containing 0.1% sodium laurylsulfate (SLS) adjusted to pH 3.7 at a flow rate 1 ml/min, with UV detection at 260 nm and ambient temperature. For combination II, the mobile phase consists of a mixture of 0.02 M sodium dihydrogenphosphate aqueous solution adjusted to pH 6.0 (with 0.2 M orthophosphoric acid or sodium hydroxide) and acetonitrile in a ratio of (7:3) at a flow rate 1 ml/min, with UV detection at 254 nm and ambient temperature. The methods also permitted the determination of methyl hydroxybenzoate (MHB) which is used as a preservative in DOX vials, combination I, and of benzyl alcohol (BZA) preservative in ETO vials, combination II. The proposed HPLC methods were successfully applied to the determination of the investigated drugs, of the two combinations, both in injection solutions and spiked human plasma samples with high precision and accuracy. Linearity, validation, accuracy, precision, limits of detection, limits of quantitation, and other aspects of analytical validation are presented in the text.     

Simultaneous Determination of Sitagliptin Phosphate Monohydrate and Metformin Hydrochloride in Tablets by a Validated UPLC Method

A novel approach was used to develop and validate a rapid, specific, accurate and precise reverse phase ultra performance liquid chromatographic (UPLC) method for the simultaneous determination of Sitagliptin phosphate monohydrate and Metformin hydrochloride in pharmaceutical dosage forms. The chromatographic separation was achieved on Aquity UPLC BEH C8 100 × 2.1 mm, 1.7 μm, column using a buffer consisting of 10 mM potassium dihydrogen phosphate and 2 mM hexane-1-sulfonic acid sodium salt (pH adjusted to 5.50 with diluted phosphoric acid) and acetonitrile as organic solvent in a gradient program. The flow rate was 0.2 mL min(-1) and the detection wavelength was 210 nm. The limit of detection (LOD) for Sitagliptin phosphate monohydrate and Metformin hydrochloride was 0.2 and 0.06 μg mL(-1), respectively. The limit of quantification (LOQ) for Sitagliptin phosphate monohydrate and Metformin hydrochloride was 0.7 and 0.2 μg mL(-1), respectively. This method was validated with respect to linearity, accuracy, precision, specificity and robustness. The method was also found to be stability-indicating.     

Quantitative estimation of itopride hydrochloride and rabeprazole sodium from capsule formulation

Two simple, accurate, economical and reproducible UV spectrophotometric methods and one HPLC method for simultaneous estimation of two component drug mixture of itopride hydrochloride and rabeprazole sodium from combined capsule dosage form have been developed. First developed method involves formation and solving of simultaneous equations using 265.2 nm and 290.8 nm as two wavelengths. Second method is based on two wavelength calculation, wavelengths selected for estimation of itopride hydrochloride was 278.0 nm and 298.8 nm and for rabeprazole sodium 253.6 nm and 275.2 nm. Developed HPLC method is a reverse phase chromatographic method using phenomenex C(18) column and acetonitrile: phosphate buffer (35:65 v/v) pH 7.0 as mobile phase. All developed methods obey Beer's law in concentration range employed for respective methods. Results of analysis were validated statistically and by recovery studies.     

Photochemical stability of nimesulide

HPLC and TLC methods for monitoring of the photochemical stability of nimesulide are presented. Solution of nimesulide sodium salt was exposed to the light of wavelengths 254 nm. The presence of degradation products (2-phenoxy4-nitroaniline and methanesulfonic acid) was observed. In the exposed sample, 2-phenoxy4-nitroaniline was detected by HPLC analysis and sulfonic acid was detected by TLC analysis. An isocratic HPLC chromatographic condition was described for determination of nimesulide in a presence of its degradation product. The sample was analysed on Separon SGX, C(18), 250 x 4.6 i.d. 7 microm analytical column. The mobile phase was consisted of a mixture of acetonitrile and ammonium phosphate (pH 7.9; 0.02 M) (35:65 v/v). UV detector was performed at 245 nm. Propylparaben was employed as an internal standard. Standard area response was linear respect to concentration of nimesulide over range 150-500 microg/ml. As a validation of the method, the accuracy and between-day precision were done. The detection limit of 2-phenoxy4-nitroaniline was 0.12 microg/ml. The solvent system for TLC analysis was consisted of ethylacetate and cyclohexane (45:55), the samples were plotted on silica gel UV-254 nm. UV lamp (254 nm) and the chemical detection were used.     

Application of first-derivative UV-spectrophotometry, TLC-densitometry and liquid chromatography for the simultaneous determination of mebeverine hydrochloride and sulpiride

Three methods are described for the simultaneous determination of mebeverine hydrochloride (MB) and sulpiride (SU) in combined pharmaceutical tablets. The first method depends on first-derivative ultraviolet spectrophotometry, with zero-crossing measurement method. The first derivative amplitudes at 214.2 and 221.6 nm were selected for the assay of MB and SU, respectively. Calibration graphs follow Beer's law in the range of 10-30 and 2-8 microg/ml(-1), and the linearity was satisfactory (r = 0.9999), for MB and SU, respectively. The second method was based on the application of the thin layer chromatographic separation of both drugs followed by the densitometric measurements of their spot areas. After separation on silica gel GF254 plates, using ethanol: diethyl ether: triethylamine (70:30:1 v/v) as the mobile phase, the chromatographic zones corresponding to the spots of MB and SU were scanned at 262 and 240 nm, respectively. The calibration function was established in the ranges of 4-12 microg for MB and 2-8 microg for SU. The third method was an internal standard procedure based on high performance liquid chromatographic separation of the two drugs on a reversed-phase, Bondapak CN column. The detection was done at 243 nm using buclizine hydrochloride as internal standard. All chromatographic methods showed good linearity, precision and reproducibility. No spectral or chromatographic interference from the tablet excipients were found. The proposed methods were successfully applied to the assay of commercial tablets and content uniformity test. The procedures were rapid, simple and suitable for quality control application.     

RP-HPLC and Spectrophotometric Estimation of Ambroxol Hydrochloride and Cetirizine Hydrochloride in Combined Dosage Form

Rapid, precise, accurate, specific and sensitive reverse phase liquid chromatographic and absorbance ratio spectrophotometric methods have been developed for the simultaneous analysis of ambroxol hydrochloride and cetirizine hydrochloride in their tablet formulation. The chromatographic methods were standardized using a HIQ SIL-C(18) column (250×4.6 mm i.d., 10 μm particle size) with UV detection at 229 nm and mobile phase consisting of methanol-acetonitrile-water (40:40:20, v/v/v). Ambroxol hydrochloride and cetirizine hydrochloride have absorbance maxima at 243 nm and 229 nm, respectively. The isoabsorptive wavelength for both the drugs was 236 nm. For absorbance ratio method developed, wavelengths selected were 243 nm and 236 nm. The proposed methods were successfully applied to the determination of ambroxol hydrochloride and cetirizine hydrochloride in tablets, with high percentage of recovery, good accuracy and acceptable precision. Different analytical performance parameters such as linearity, precision, accuracy, limit of detection, limit of quantitation and robustness were determined according to International Conference on Harmonization ICH Q2B guidelines. Results of analysis of the developed method were compared by performing ANOVA.     

High performance liquid chromatographic determination of oxeladin citrate and oxybutynin hydrochloride and their degradation products

Two high performance liquid chromatographic (HPLC) methods are presented for the determination of oxeladin citrate (OL) and oxybutynin hydrochloride (OB) and their degradation products. The first method was based on HPLC separation of OL from its degradation product using a Nucleosil C(18) column with a mobile phase consisting of acetonitrile -0.1% phosphoric acid (60:40 v/v). The second method was based on HPLC separation of OB from its degradation product using a VP-ODS C(18) column with a mobile phase consisting of acetonitrile/0.01 M potassium dihydrogen phosphate/diethylamine (60:40:0.2). Quantitation was achieved with UV detection at 220 nm based on peak area. The two HPLC methods were applied for the determination of OL or OB, their degradation products, methylparaben and propylparaben in pharmaceutical preparations. The proposed methods were used to investigate the kinetics of acidic and alkaline degradation processes of OL and OB at different temperatures and the apparent pseudofirst-order rate constant, half-life and activation energy were calculated. The pH-rate profiles of degradation of OL and OB in Britton-Robinson buffer solutions within the pH range 2-12 were studied.