Cementless total hip arthroplasty using a threaded cup and a rectangular tapered stem. Follow-up for ten to 17 years

We carried out a clinical and radiological review of 103 cementless primary hip arthroplasties with a tapered rectangular grit-blasted titanium press-fit femoral component and a threaded conical titanium acetabular component at a mean follow-up of 14.4 years (10.2 to 17.1). The mean Harris hip score at the last follow-up was 89.2 (32 to 100). No early loosening and no fracture of the implant were found. One patient needed revision surgery because of a late deep infection. In 11 hips (10.7%), the reason for revision was progressive wear of the polyethylene liner. Exchange of the acetabular component because of aseptic loosening without detectable liner wear was carried out in three hips (2.9%). After 15 years the survivorship with aseptic loosening as the definition for failure was 95.6% for the acetabular component and 100% for the femoral component.     

Minimum 10-year results of a tapered cementless hip replacement.

Seventy-one total hip arthroplasties with a cementless, wedge fit, cobalt chrome femoral component were reviewed in 60 patients at a minimum 10-year followup (mean, 11.5 years). For the femoral component, the mechanical failure rate was 5% and the revision rate for aseptic loosening was 0%. The mean Charnley scores for pain, function, and motion changed from preoperative mean values of 3.0, 2.7, and 3.2 to followup mean values of 5.7, 5.5, and 5.2, respectively. The followup mean Harris hip Score was 91. The incidence of thigh pain was 1.4% at 10-year followup. Ninety-five percent of femoral components showed radiologic evidence of stable, bone ingrowth fixation, whereas loosening was seen in 5% of stems. Despite the high incidence of acetabular osteolysis, no osteolysis was seen on the femoral side distal to the lesser trochanter. Nonmodularity of the femoral component led to unavoidable revision of stably fixed femoral components in seven (9.8%) hips during the revision of a loose socket. Design features (collarless, tapered, wedge fit, and circumferentially porous coated) were thought to be crucial to the superlative results with the cobalt chrome femoral component.     

Particulate bone grafting of osteolytic femoral lesions around stable cementless stems

The purpose of the current study was to evaluate the effect of particulate grafting for proximal femoral osteolysis in the presence of a well-fixed cementless femoral stem at the time of acetabular liner change or revision. Sixteen patients (17 hips) who averaged 51 years of age underwent curettage and packing of proximal femoral osteolytic lesions with cancellous allograft. Modular acetabular liners were changed in 11 patients, acetabular revisions were performed in six patients, and femoral heads were exchanged in all patients. The femoral component was retained in all patients. The majority of patients were asymptomatic before revision surgery. The size of the femoral osteolytic lesions was measured preoperatively and postoperatively with anteroposterior and Lauenstein lateral radiographs of the hip. Preoperatively, the average lesion was 41 x 16 mm on the anteroposterior view and 18 x 7 mm on the lateral view. The average clinical and radiographic followup was 39 and 32 months, respectively, with a minimum followup of 24 months. All but one patient remained asymptomatic during the followup period and no femoral stem showed evidence of loosening. The size of the femoral osteolytic lesion averaged 16 x 6 mm on the anteroposterior view and 6 x 2 mm on the lateral view at most recent followup. In 15 of 17 patients, the size of the femoral lesion had regressed. This technique seems to be a viable means of preventing progressive osteolysis and femoral loosening while preserving bone stock for future reconstruction.     

Cementless total hip arthroplasty with a tapered, rectangular titanium stem and a threaded cup: a minimum ten-year follow-up

BACKGROUND: We report the results of cementless total hip arthroplasty with a tapered, rectangular titanium stem that was introduced in 1979 and continues to be used today with only minor changes. The aim of the design is to achieve primary stability to resist rotational and axial forces through precision rasping and press-fit implantation of a tapered, rectangular femoral component. METHODS: Between October 1986 and November 1987, 208 total hip arthroplasties with insertion of a tapered, rectangular titanium stem and a threaded cup without cement were performed in 200 consecutive patients (average age, sixty-one years; range, twenty-two to eighty-four years). RESULTS: At the time of the latest follow-up, fifty-one patients (fifty-two hips) had died and sixteen patients had been lost to follow-up, leaving 133 patients. Twelve hips had been revised, two in patients who subsequently died, leaving 123 living patients without revision. The median follow-up time was 120.7 months. Five cups needed revision surgery because of aseptic loosening; two, because of massive polyethylene wear; one, because of posttraumatic migration; and one, because of breakage. Three femoral stems were revised: one because of malpositioning (the reoperation was done five days after implantation); one, because of infection; and the third, after multiple failed acetabular revisions. The mean Harris hip score for the patients who did not have revision was 85.4 points (range, 46 to 100 points) at the time of the latest follow-up. Four patients (3%) complained of thigh pain that was not associated with another disorder. According to the criteria of Engh et al., all femoral implants were graded as stable bone-ingrown. The probability of survival of both the femoral and the acetabular component at ten years, with any revision as the end point, was 0.92 (95% confidence interval, 0.88 to 0.97). The probability of survival of the cup was 0.93 (95% confidence interval, 0.89 to 0.97), and that of the stem was 0.99 (95% confidence interval, 0.97 to 1.00). CONCLUSIONS: The results of arthroplasty with a tapered, rectangular titanium stem combined with a conical threaded cup inserted without cement were excellent at a minimum of ten years. Our data suggest that femoral stem fixation continues to be secure, while the threaded cup is prone to aseptic loosening.     

Long-term results using the anatomic medullary locking hip prosthesis.

Since the introduction of cementless total hip arthroplasty in the early 1980s, concern has shifted from component loosening toward polyethylene wear and osteolysis. The current review of 223 consecutive unselected Anatomic Medullary Locking femoral and acetabular components extends the followup on a series of patients previously reported on at 5 and 10 years. The purposes are to describe the reasons for revisions and to assess the onset and size of osteolytic lesions, with the hypothesis that osteolysis represents an important cause of loosening. The population included 204 patients (211 hips) with mean followup of 13.9 years (range, 2-18 years). Among them, 122 patients (129 hips) had a minimum 15-year followup. Minimum 2-year radiographs with a mean radiographic followup of 12.2 years (range, 2-18 years) were available for 204 hips (197 patients). Of the entire study group, 39 hips (38 patients) had 44 component revisions, increasing the number of revisions by 24 since this series was reported previously. Twenty-six patients (27 hips) had their first revision surgery more than 10 years after the primary surgery. The most common reason for revision of original components was wear or osteolysis occurring in 22 of the 39 hips (21 of 38 patients). The overall loosening rate was 3.4% (seven of 204) for femoral components and 5.4% (11 of 204) for acetabular components. Twenty-four percent of hips (48 of 204) had evidence of femoral or pelvic osteolytic lesions larger than 1.5 cm2. Femoral osteolysis was not associated with any case of femoral loosening, whereas seven of the 11 loose acetabular components were associated with pelvic lesions larger than 1.5 cm2.     

Late loosening of press-fit cementless acetabular components

Between January 1987 and September 1990, 67 consecutive cementless total hip arthroplasties were implanted in 59 patients by one surgeon. The mean age of the patients at surgery was 57 years (range, 23-80 years). All acetabular components were plasma-sprayed titanium hemispheric cups with four peripheral rim fins, but additional screw fixation was not used. The mean followup was 10.4 years (range, 8.8-12.5 years). With revision as the endpoint, the failure rate of this acetabular component at a mean of 10.4 years was 28% (19/67). Of the 56 patients (56 hips) with radiographic followup, loosening of the acetabular shell occurred in 10 hips in 10 patients (18%). Seventy percent of these loosened cups failed by tilt which occurred in a rapid manner; all of the patients required revision surgery. We examined the manner of loosening of a press-fit acetabular component after early (5-year) results showed high hip scores and a low failure rate.     

Thirteen year results of total hip arthroplasty using a tapered titanium femoral component inserted without cement in patients with type C bone

Although cementless arthroplasty with a tapered titanium femoral component has proven reliable in young patients with excellent bone quality, studies involving patients with poor bone quality are lacking. The present study evaluates the results of total hip arthroplasty (THA) using such a femoral component in patients with Type C femoral bone. Ninety-two THAs were performed in 81 patients aged 65 years and older using a tapered titanium cementless femoral component. Follow-up in 62 patients (72 hips) averaged 13.2 years (minimum, 10 years); 19 patients were lost to follow-up. According to Door’s criteria, 20 femora were classified as Type A, 19 as Type B, and 33 as Type C. No stem was revised because of stem instability, thigh pain, or osteolysis. One stem was removed because of sepsis. Six acetabula were revised because of polyethylene wear and periacetabular osteolysis. Four patients reported mild thigh pain. Radiologic signs of osseous integration for cylindrical extensively porous coated cobalt-chrome femoral components are not valid for tapered titanium designs.     

The use of tapered stems for femoral revision surgery

From a biomechanical view point, cementless fixation of a tapered stem has some advantages compared with other techniques to treat severe proximal femoral bone loss in reconstructive hip surgery. We reviewed 129 consecutive revision arthroplasties of the femoral component in which the tapered Wagner self-locking revision stem was used. The mean followup of patients without rerevision of the stem was 8.1 years (range, 5.1-14.1 years). Six revision stems required rerevision (malpositioning, one stem; subsidence, one stem; periprosthetic fracture, one stem; deep infection, three stems) between 0.13 and 4.6 years postoperatively. Using removal of the stem for any cause as the end point, the cumulative survival at 14.1 years was 95.2%. The average Merle d'Aubigné score improved from 7.7 points preoperatively to 14.4 points at the latest followup. Because of new bone formation, the most recent radiographs showed clear, good, or excellent restoration of the proximal femur in 88% of patients. Considering possible late complications such as osteolysis of the femur, aseptic loosening, periprosthetic fracture, and late infection, the shortest stem that ensures sufficient mechanical stability should be used. It may be easier to achieve high primary stability in short stems with a tapered design than with other short stem designs.     

Total hip arthroplasty using an Omniflex modular system: 5 to 12 years followup

We evaluated intermediate-term results of primary cementless Omniflex prostheses. Forty-nine patients (57 hips) with a mean age of 44 years were observed for an average of 8.6 years. The average Harris hip score was 46 points before surgery and 87 points at final followup. Revision was done in five hips (9%) in five patients. Two acetabular components (4%) were revised because of breakage of the polyethylene insert. Three femoral components (5%) were revised because of aseptic loosening. Six femoral components (10%) were radiographically loose. Overall, 11 hips (19%) were considered mechanical failures. Osteolysis was identified around three acetabular components (5%) and around 20 femoral components (35%). Nine hips (16%) had femoral osteolysis around the distal stem tip. The average annual polyethylene liner wear was 0.18 mm. These results were inferior to those using other recent cementless total hip systems.     

Cementless gustilo-kyle and BIAS total hip arthroplasty: 2- to 5-year results

Summary We conducted extensive radiographic and clinical examination of 58 cementless total hip arthroplasties. Forty BIAS femoral stems had heads made of Co-base F 75 alloy and 18 Gustilo-Kyle femoral stems had Ti6A14V alloy heads. The cross-sectional geometry and location of the porous coating pads of the two stem types was identical, the BIAS component being slightly shorter. At the last follow-up, 27.8% of the Gustilo-Kyle femoral components and 2.5% of the BIAS femoral components were unstable. None of the acetabular components in the BIAS group as against 38.9% of the acetabular components in the Gustilo-Kyle group demonstrated wear of more than I mm. All unstable components which did not suffer intraoperative fracture had also acetabular wear of more than 1 mm. The only case with endosteal erosion was seen in a patient with an unstable implant displaying the most extensive wear. Nonparametric statistical analysis showed that the patients with Ti6A14V/polyethylene bearing surfaces had a statistically significantly higher extent of wear and a statistically significant higher incidence of femoral component loosening than patients with CrCoMo/polyethylene bearing surfaces.     

Cementless acetabular replacement in the young. A 5- to 10-year prospective study

This article presents a prospective clinical and radiologic review of 55 total hip replacements in 50 patients in which the cementless Harris-Galante porous-coated acetabular component was used. All patients were 50 years of age or younger. The cups were inserted by 15 different surgeons. The minimum followup was 5 years, with a mean of 7 years. No acetabular component has been revised for loosening, and none have migrated. Three (5.5%) cups have progressive bone-component radiolucent lines, two (3.6%) of which are complete. Six (10.9%) acetabular liners have been replaced for excessive polyethylene wear, and an additional four (7.3%) show sufficient wear to produce obvious radiographic eccentricity of the femoral head. All of the revised liners had 32-mm femoral heads and an initial polyethylene thickness of less than 6 mm. Although the results reflect excellent fixation of this component in the medium term, the incidence of exchange of the polyethylene liner for excessive wear is unacceptably high. The reduction in polyethylene thickness associated with the use of a metal-backed component and a 32-mm articulation was one of the factors contributing to the accelerated wear patterns seen in this series.     

Cementless total hip replacement using second-generation components: a 12- to 16-year follow-up

We reviewed 123 second-generation uncemented total hip replacements performed on 115 patients by a single surgeon between 1993 and 1994. The acetabular component used in all cases was a fully porous-coated threaded hemispheric titanium shell (T-Tap ST) with a calcium ion stearate-free, isostatically compression-moulded polyethylene liner. The titanium femoral component used was a Taperloc with a reduced distal stem. No patient was lost to follow-up. Complete clinical and radiological follow-up was obtained for all 123 hips at a mean of 14 years (12 to 16). One femoral component was revised after a fracture, and three acetabular components for aseptic loosening. No additional femoral or acetabular components were judged loose by radiological criteria. Mild proximal femoral osteolysis was identified in two hips and minor acetabular osteolysis was present in four. The mean rate of penetration of the femoral head was 0.036 mm/year (0.000 to 0.227). These findings suggest that refinements in component design may be associated with excellent long-term fixation in cementless primary total hip replacement.     

Cementless acetabular revision for aseptic failure of cemented hip arthroplasty

This study is a 5- to 11-year retrospective followup of 40 hips in 33 patients with cementless acetabular revision for aseptic failure of a cemented total hip arthroplasty. A porous coated, Harris-Galante acetabular component was used in all revisions. Thirty-eight of the 40 hips received acetabular bone grafting at revision. The mean Harris Hip Score improved from 51 points just before the index cementless revision to 87 points at the most recent followup. Twenty-nine of 40 (73%) hips were classified as having a good or excellent result. Radiolucencies were observed in seven of the 40 (18%) hips at the most recent followup, but none of these radiolucencies were complete or progressive. Five of the 40 (13%) hips were rated as failures and required repeat revision. Two (5%) of these failures were caused by aseptic loosening, with both hips having severe acetabular bone damage at the time of the index revision. This failure rate for aseptic loosening was less than that reported for cemented acetabular revision, thereby confirming the efficacy of cementless acetabular components in revision hip surgery in the intermediate term.     

Clinical and radiographic outcome of a cementless,titanium, plasma spray-coated total hip arthroplasty femoral component: Justification for continuance of use

Between 1984 and 1986, 177 nonconsecutive, primary total hip arthroplasties were performed in 150 patients using the Mallory—Head Porous femoral component (Biomet, Warsaw, IN) inserted without cement. Average time to follow-up evaluation for the entire population (including all early revisions) was 76 months (6.3 years). There were 10 revisions (6%) with an average time to revision of 50 months (4.2 years). Two revisions were for component undersizing; three revisions were for aseptic loosening; four revisions were for acetabular component failure and one revision was due to a femoral fracture secondary to trauma. At the most recent follow-up visit, the average Harris hip score for all hips increased from 41.5 before surgery to 86.8 (P < .001). Radiographic assessments yielded an average Engh fixation score of 20.7. The Kaplan—Meier survival estimate for the average time to follow-up evaluation was 0.98. Based on our patient selection criteria and excellent intermediate clinical and radiographic results, the initial design strategies of the Mallory—Head Porous femoral prosthesis have been confirmed.     

Revision of a cemented acetabular component to a cementless acetabular component. A ten to fourteen-year follow-up study.

BACKGROUND: Although cementless acetabular components are routinely used in revision hip surgery, few investigators have evaluated the retention and efficacy of these components in the long term. In the current study, the clinical and radiographic outcomes of a series of arthroplasties performed by one surgeon with a cementless acetabular component were assessed at a minimum of ten years. METHODS: From 1986 through 1988, sixty-one consecutive revision total hip arthroplasties were performed in fifty-five patients because of aseptic failure of one or both components of a prosthesis in which both components had been cemented. Twenty-eight patients (thirty-two hips) were alive at a mean of 12.9 years (range, 11.5 to 14.3 years) after the operation. In all of the patients, the acetabular component was revised to a porous-coated Harris-Galante component inserted without cement, and the femoral component was revised to an Iowa component affixed with contemporary cementing techniques. The hips were evaluated clinically and radiographically at a minimum of ten years subsequent to the index revision. No hips were lost to follow-up. RESULTS: None of the acetabular components required revision because of aseptic loosening. Two hips (3%) demonstrated radiographic evidence of aseptic loosening of the acetabular component. The polyethylene liner was exchanged during the follow-up period in eight hips. CONCLUSION: After a minimum of ten years of follow-up, cementless acetabular fixation in revision hip arthroplasty had produced durable results that were markedly better than those reported for acetabular fixation with cement.     

人工髋关节置换术后翻修病例分析

目的分析人工髋关节置换术后翻修的原因,评价全髋翻修术的临床效果。方法本组33例34髋。初次关节置换类型:全髋置换21例,双杯髋关节置换1例,人工股骨头置换11例。翻修原因:无菌性松动23例24髋,髋臼位置不良1例1髋,股骨头置换后髋臼磨损5例5髋,感染4例4髋。翻修距初次手术时间:1年以内5髋,1～2年1髋,5～10年18髋,10～13年10髋。翻修假体类型:非骨水泥型假体20髋,混合型假体7髋,骨水泥型假体7髋。结果平均随访3.5年。1例术后半年发生股骨柄松动进行再翻修,其余病例假体保留,优良率为82.4%。结论翻修的最常见原因为无菌性松动,人工股骨头置换时髋臼磨损也是翻修原因之一,对较年轻的股骨颈骨折患者,如行假体置换,最好采用全髋关节置换。翻修术采用非骨水泥型假体较好。     

Acetabular revision after failed total hip arthroplasty in patients with congenital hip dislocation and dysplasia. Results after a mean of 8.6 years

BACKGROUND: Revision of a total hip arthroplasty in a patient who has had congenital hip dysplasia or dislocation is often more difficult than a standard revision operation. The purpose of this study was to assess the efficacy and complications of use of a cementless hemispherical acetabular component for revision of an acetabular component of a failed total hip replacement in patients whose initial problem was arthritis secondary to congenital dislocation or dysplasia. The mean duration of follow-up was approximately eight years. METHODS: We reviewed a consecutive series of sixty-one hips in fifty-three patients who underwent a cementless acetabular revision with use of a hemispherical acetabular component, with or without concurrent femoral revision. Data were collected prospectively. The mean age of the patients at the time of the index operation was fifty-six years. A mean of 1.9 ipsilateral hip operations had been performed previously. Thirty-nine hips (64 percent) had a so-called high hip center prior to the index revision. With one exception, the uncemented acetabular component was fixed with screws. Fifty-one acetabular components were placed with so-called line-to-line fit, and ten were oversized by one to three millimeters. In thirty-eight hips, the femoral component was revised as well. Twenty-nine femora were reconstructed with use of a cemented device, and nine were revised with an uncemented patch-porous-coated femoral stem (a stem on which the porous coating appears in patches). RESULTS: Four patients (five hips) died prior to the five-year minimum follow-up interval. With the exception of one hip treated with resection arthroplasty because of deep infection, none of the hips in these deceased patients had been revised or had a loose component. One living patient (one hip) had a resection arthroplasty, and one additional patient (two hips) had both stable acetabular components rerevised at the time of femoral rerevision at another institution because of loosening and osteolysis. One patient refused to return for follow-up, but the components had not been revised. The remaining fifty-two hips in forty-six patients were followed for a mean of 8.6 years (range, 5.0 to 12.7 years). The mean Harris hip score was 80 points (range, 56 to 100 points) at the time of the latest follow-up. No acetabular component had been revised, although two had migrated. No other acetabular component was loose according to our radiographic criteria. Thus, the mechanical failure rate on the acetabular side was 3 percent (two of sixty-one) for the entire series and 4 percent (two of fifty-two) for the patients who had been followed for a mean of 8.6 years. On the femoral side, the mechanical failure rate was 3 percent (one of twenty-nine) for the cemented stems and six of nine for the uncemented patch-porous-coated stems. CONCLUSIONS: Of the approaches used in this difficult series of patients requiring revision, the hybrid arthroplasty (a cementless acetabular component and a cemented femoral component) yielded overall good results after an intermediate duration of follow-up.     

Fifteen-year survivorship of a collarless,cemented, normalized femoral stem in primary hybrid total hip arthroplasty with a modified third-generation cement technique

This prospective review aimed to evaluate 15-year survivorship of the collarless, third-generation cemented, normalized, Omnifit (Osteonics, Allendale, NJ) femoral stem in hybrid total hip arthroplasty (THA). Between January 1986 and June 1990, a single surgeon prospectively implanted 250 consecutive hybrid THAs (215 patients) using a modified third-generation cement technique in selected patients. A Harris-Galante (I or II) (Zimmer, Warsaw, IN) cementless shell with modular polyethylene (4150 resin) liners gamma-sterilized in air were implanted. Kaplan-Meier survivorship of the femoral or acetabular component with mechanical failure (revision for aseptic loosening) as the end-point was 100% ± 0% at 15 years. Wear couple exchange and bone grafting was performed in 1 case (0.4%) for progressive acetabular osteolysis. This report supports femoral component centralization and good cement mantle to ensure durability of the collarless, cemented, normalized femoral stem with a surface roughness of 30–40 microinches.