Micellar carriers based on block copolymers of poly(epsilon-caprolactone) and poly(ethylene glycol) for doxorubicin delivery.

Diblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxy poly(ethylene glycol) (MPEG) with various compositions were synthesized. The amphiphilic block copolymers self-assembled into nanoscopic micelles and their hydrophobic cores encapsulated doxorubicin (DOX) in aqueous solutions. The micelle diameter increased from 22.9 to 104.9 nm with the increasing PCL block length (2.5-24.7 kDa) in the copolymer composition. Hemolytic studies showed that free DOX caused 11% hemolysis at 200 microg ml(-1), while no hemolysis was detected with DOX-loaded micelles at the same drug concentration. An in vitro study at 37 degrees C demonstrated that DOX-release from micelles at pH 5.0 was much faster than that at pH 7.4. Confocal laser scanning microscopy (CLSM) demonstrated that DOX-loaded micelles accumulated mostly in cytoplasm instead of cell nuclei, in contrast to free DOX. Consistent with the in vitro release and CLSM results, a cytotoxicity study demonstrated that DOX-loaded micelles exhibited time-delayed cytotoxicity in human MCF-7 breast cancer cells.     

Polymeric micelles of poly(2-ethyl-2-oxazoline)-block-poly(epsilon-caprolactone) copolymer as a carrier for paclitaxel.

Polymeric micelles based on amphiphilic block copolymers of poly(2-ethyl-2-oxazoline) (PEtOz) and poly(epsilon -caprolactone) (PCL) were prepared in an aqueous phase. The loading of paclitaxel into PEtOz-PCL micelles was confirmed by 1H-NMR spectra. Paclitaxel was efficiently loaded into PEtOz-PCL micelles using dialysis method, and the loading content of paclitaxel in micelles was in the range 0.5-7.6 wt.% depending on the block composition of block copolymers, organic solvent used in the dialysis, and feed weight ratio of paclitaxel to block copolymer. The higher the content of hydrophobic block in the block copolymers, the higher the loading efficiency of micelles for paclitaxel. When acetonitrile was used as solvent, a higher drug loading efficiency was obtained than with THF. The loading efficiency decreased with increasing feed weight ratio of paclitaxel to block copolymer from 0.1:1 to 0.2:1. The hydrodynamic diameters of paclitaxel-loaded micelles were in the range 18.3-23.4 nm with narrow size distribution. The hemolysis test of PEtOz-PCL performed in vitro indicated that the toxicity of PEtOz-PCLs to lipid membrane was not significant compared with Tween 80, and was comparable to that observed with Cremophore EL. The proliferation inhibition activity of paclitaxel-loaded micelles for KB human epidermoid carcinoma cells was also evaluated in vitro. Paclitaxel-entrapped polymeric micelles exhibited comparable activity to that observed with Cremophore EL-based paclitaxel formulations in inhibiting the growth of KB cells.     

Poly(ethylene glycol)/poly(epsilon-caprolactone) diblock copolymeric nanoparticles for non-viral gene delivery: the role of charge group and molecular weight in particle formation, cytotoxicity and transfection.

Two types of nanoparticles containing pGL3-Control (plasmid DNA) were prepared using nonionic amphiphlic block copolymers and ionic amphiphilic block copolymers containing a terminal cationic group to investigate the effect of charge on the vehicle properties for systemic gene delivery. Methoxy poly(ethylene glycol) (MPEG)/poly(epsilon-caprolactone) (PCL) diblock copolymers were synthesized by the ring-opening polymerizatrion of epsilon-caprolactone in the presence of a catalyst-free MPEG homopolymer. The hydroxy groups of MPEG/PCL block copolymer were then modified into an amine group to synthesize an amine-terminated MPEG/PCL diblock copolymer (AMPEG/PCL). DNA was incorporated into the polymeric nanoparticles by physical entrapment and electrostatic interaction. All nanoparticle samples exhibited spherical structures and although their sizes increased slightly after DNA-loading, they remained less than 160 nm. The AMPEG/PCL nanoparticles exhibited smaller particle sizes than the MPEG/PCL nanoparticles of the same molecular weight after DNA-loading. The optimum mixing ratio of MPEG/PCL and AMPEG/PCL copolymers to DNA ranged from 4:1 to 1:2 depending on the molecular weight of the block copolymer, the composition of MPEG and PCL and terminal amine group. Based on in vitro cytotoxicity tests, the DNA-loaded MPEG/PCL and AMPEG/PCL nanoparticles did not induce any remarkable cytotoxicity against normal human fibroblasts. Transfection efficiencies of DNA-loaded nanoparticles were improved about 3.4 - 12.9 times under serum conditions.     

Functionalized micelles from block copolymer of polyphosphoester and poly(-caprolactone) for receptor-mediated drug delivery

Cellular specific micellar systems from functional amphiphilic block copolymers are attractive for targeted intracellular drug delivery. In this study, we developed reactive micelles based on diblock copolymer of poly(ethyl ethylene phosphate) and poly(-caprolactone). The micelles were further surface conjugated with galactosamine to target asialoglycoprotein receptor (ASGP-R) of HepG2 cells. The size of micellar nanoparticles was about 70nm in diameter, and nanoparticles were negatively charged in aqueous solution. Through recognition between galactose ligands with ASGP-R of HepG2 cells, cell surface binding and internalization of galactosamine-conjugated micelles were significantly promoted, which were demonstrated by flow cytometric analyses using rhodamine 123 fluorescent dye. Paclitaxel-loaded micelles with galactose ligands exhibited comparable activity to free paclitaxel in inhibiting HepG2 cell proliferation, in contrast to the poor inhibition activity of micelles without galactose ligands particularly at lower paclitaxel doses. In addition, population of HepG2 cells arrested in G2/M phase was in positive response to paclitaxel dose when cells were incubated with paclitaxel-loaded micelles with galactosamine conjugation, which was against the performance of micelles without galactose ligand, owing to the ligand–receptor interaction. The surface functionalized micellar system is promising for specific anticancer drug transportation and intracellular drug release.     

Polymeric micelle for tumor pH and folate-mediated targeting.

Novel pH-sensitive polymeric mixed micelles composed of poly(L-histidine) (polyHis; M(w) 5000)/PEG (M(n) 2000) and poly(L-lactic acid) (PLLA) (M(n) 3000)/PEG (M(n) 2000) block copolymers with or without folate conjugation were prepared by diafiltration. The micelles were investigated for pH-dependent drug release, folate receptor-mediated internalization and cytotoxicity using MCF-7 cells in vitro. The polyHis/PEG micelles showed accelerated adriamycin release as the pH decreased from 8.0. When the cumulative release for 24 h was plotted as a function of pH, the gradual transition in release rate appeared in a pH range from 8.0 to 6.8. In order to tailor the triggering pH of the polymeric micelles to the more acidic extracellular pH of tumors, while improving the micelle stability at pH 7.4, the PLLA/PEG block copolymer was blended with polyHis/PEG to form mixed micelles. Blending shifted the triggering pH to a lower value. Depending on the amount of PLLA/PEG, the mixed micelles were destabilized in the pH range of 7.2-6.6 (triggering pH for adriamycin release). When the mixed micelles were conjugated with folic acid, the in vitro results demonstrated that the micelles were more effective in tumor cell kill due to accelerated drug release and folate receptor-mediated tumor uptake. In addition, after internalization polyHis was found to be effective for cytosolic ADR delivery by virtue of fusogenic activity. This approach is expected to be useful for treatment of solid tumors in vivo.     

Lipophilic prodrugs of Hsp90 inhibitor geldanamycin for nanoencapsulation in poly(ethylene glycol)-b-poly(epsilon-caprolactone) micelles.

A solvent and Cremephor free formulation of the anticancer chemotherapeutic geldanamycin was prepared using amphiphilic block co-polymer micelles of poly(ethylene glycol)-b-poly(epsilon-caprolactone) (PEG-b-PCL). Although geldanamycin was not solubilized by PEG-b-PCL micelles, fatty acid prodrugs of geldanamycin were encapsulated in PEG-b-PCL micelles by a co-solvent extraction technique. Resulting PEG-b-PCL micelles were <120 nm in diameter and solubilized >20% w/w geldanamycin prodrugs increasing aqueous solubility to >2 mg/mL. PEG-b-PCL micelles released the geldanamycin prodrugs over several days, t(1/2) 2.2 to 9.6 days. The free prodrugs hydrolyzed rapidly, t(1/2)<6 h, into the geldanamycin analogue 17-beta-hydroxyethylamino-17-demethoxygeldanamycin, which has high activity against MCF-7 breast cancer cells, IC(50) 240 nM.     

Micelles of methoxy poly(ethylene oxide)-b-poly(epsilon-caprolactone) as vehicles for the solubilization and controlled delivery of cyclosporine A.

The commercial formulation of Cyclosporine A (CsA) for intravenous administration contains Cremophor EL, a low molecular weight surfactant known to be toxic. In this study, micelles of methoxy poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) were investigated as alternative vehicles for the solubilization and delivery of CsA. PEO-b-PCL block copolymers having identical PEO chain lengths and PCL molecular weights of 5000, 13,000, or 24,000 g mol(-)(1) were synthesized and assembled into polymeric micelles using a co-solvent evaporation method. PEO-b-PCL micelles were then compared to Cremophor EL micelles for their functional properties in drug delivery including micellar size, thermodynamic stability, core viscosity, CsA encapsulation, and in vitro CsA release. Among different PCL block lengths, optimum solubilization was achieved by utilizing polymeric micelles having a PCL block of 13,000 g mol(-)(1). CsA reached an aqueous solubility of 1.3 mg/mL in the presence of PEO-b-PCL micelles. This concentration is comparable to injectable CsA levels in its Cremophor EL formulation (0.5-2.5 mg/mL). In contrast to the Cremophor EL formulation, the in vitro rate of CsA release was significantly sustained by the polymeric micellar carrier. Within 12 h, only 5.8% of CsA was released from polymeric micelles while Cremophor EL micelles released 77% of their drug content. Accordingly, viscosity of the PEO-b-PCL micellar core was found to be significantly higher than Cremophor EL micelles. The results points to a potential for PEO-b-PCL micelles as nanoscopic drug carriers for efficient solubilization and controlled delivery of CsA.     

The effect of paclitaxel-loaded nanoparticles with radiation on hypoxic MCF-7 cells

BACKGROUND AND OBJECTIVE: The inability of radiotherapy to eradicate completely certain human tumours may be due to the presence of resistant hypoxic cells. Several studies have confirmed the radiosensitizing effect of paclitaxel, a microtubular inhibitor. The object of this study was to evaluate the physicochemical characteristics of paclitaxel-loaded nanoparticles, and determine the ability of the released paclitaxel to radiosensitize hypoxic human breast carcinoma cells (MCF-7) with respect to radiation dose. METHODS: The poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles containing paclitaxel were prepared by o/w emulsification-solvent evaporation method. The morphology of the paclitaxel-loaded nanoparticles was investigated by scanning electron microscopy. The drug encapsulation efficiency (EE) and in vitro release profile were measured by high-performance liquid chromatography. Cell cycle was evaluated by flow cytometry. Cell viability was measured by the ability of single cells to form colonies in vitro. RESULTS: The prepared nanoparticles were spherical with diameter between 200 and 800 nm. The EE was 85.5%. The drug release pattern was biphasic with a fast release rate followed by a slow one. Co-culture of human breast carcinoma cells (MCF-7) with paclitaxel-loaded nanoparticles demonstrated that released paclitaxel retained its bioactivity to block cells in the G2/M phase of the cell cycle and effectively sensitized hypoxic MCF-7 cells to radiation with radiosensitivity shown to be dependent of radiation dose at levels of dosages studied. The sensitizer enhancement ratio for paclitaxe-loaded nanoparticles at 10% survival is approximately 1.4. CONCLUSION: This work has demonstrated that paclitaxel can be effectively released from a biodegradable PLGA nanoparticle delivery system while maintaining potent combined cytotoxic and radiosensitizing abilities for hypoxic tumour cells.     

In vitro release of the mTOR inhibitor rapamycin from poly(ethylene glycol)-b-poly(epsilon-caprolactone) micelles.

An injectable formulation of rapamycin was prepared using amphiphilic block co-polymer micelles of poly(ethylene glycol)-b-poly(epsilon-caprolactone) (PEG-PCL). Drug-loaded PEG-PCL micelles were prepared by a co-solvent extraction technique. Resulting PEG-PCL micelles were less than 100 nm in diameter and contained rapamycin at 7% to 10% weight and >1 mg/mL. PEG-PCL micelles released rapamycin over several days, t50% 31 h, with no burst release; however, physiological concentrations of serum albumin increased the release rate 3-fold. Alpha-tocopherol, vitamin E, was co-incorporated into PEG-PCL micelles and increased the efficiency of rapamycin encapsulation. The addition of alpha-tocopherol also slowed the release of rapamycin from PEG-PCL micelles in the presence of serum albumin, t50% 39 h.     

Precipitation casting of drug-loaded microporous PCL matrices: incorporation of progesterone by co-dissolution.

Microporous, poly(epsilon-caprolactone) (PCL) matrices were loaded with progesterone by precipitation casting using co-solutions of PCL and progesterone in acetone. Progesterone loadings up to 32% w/w were readily achieved by increasing the drug content of the starting PCL solution. The kinetics of steroid release in PBS at 37 degrees C over 10 days could be described effectively by a diffusional release model although the Korsmeyer-Peppas model indicated the involvement of multiple release phenomena. The diffusion rate constant (D) increased from 8 to 24 microg/mg matrix/day0.5 as the drug loading increased from 3.6 to 12.4% w/w. A total cumulative release of 75%-95% indicates the high efficiency of steroid delivery. Increasing the matrix density from 0.22 to 0.39 g/cm3, by increasing the starting PCL solution concentration, was less effective in changing drug release kinetics. Retention of anti-proliferative activity of released steroid was confirmed using cultures of breast cancer epithelial (MCF-7) cells. Progesterone released from PCL matrices into PBS at 37 degrees C over 14 days retarded the growth of MCF-7 cells by a factor of at least 3.5 compared with progesterone-free controls. These findings recommend further investigation of precipitation-cast PCL matrices for delivery of bioactive molecules such as anti-proliferative agents from implanted, inserted or topical devices.     

Poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)/poly(epsilon-caprolactone) (PCL) amphiphilic block copolymeric nanospheres. II. Thermo-responsive drug release behaviors.

Amphiphilic block copolymers composed of relatively hydrophilic PEO-PPO-PEO block copolymer (Pluronic) and poly (epsilon-caprolactone) with hydrophobic character were synthesized by ring-opening polymerization of epsilon-caprolactone in the presence of PEO-PPO-PEO block copolymer using stannous octoate as a catalyst. Pluronic/PCL block copolymeric nanospheres with core-shell structure were prepared by dialysis method. They showed the average diameter of 116-196 nm depending on the type of copolymer. All the nanosphere samples exhibited a narrow size distribution. The critical micelle concentrations of Pluronic/PCL amphiphilic block copolymers determined by fluorescence spectroscopy were lower than that of the common low molecular weight surfactant. Their core-shell structure was confirmed by 1H NMR spectroscopy. Pluronic/PCL block copolymeric nanospheres exhibited the reversible change of size depending on the temperature. Release behaviors of indomethacin from Pluronic/PCL block copolymeric nanospheres also showed temperature dependence and a sustained release pattern. In addition, cytotoxicity test using an MTT assay method revealed that these indomethacin-loaded Pluronic/PCL nanospheres could remarkably reduce the cell damage compared with the unloaded free indomethacin.     

Doxorubicin-loaded poly(ethylene glycol)-poly(beta-benzyl-L-aspartate) copolymer micelles: their pharmaceutical characteristics and biological significance.

Doxorubicin (DOX) was physically loaded into micelles prepared from poly(ethylene glycol)-poly(beta-benzyl-L-aspartate) block copolymer (PEG-PBLA) by an o/w emulsion method with a substantial drug loading level (15 to 20 w/w%). DOX-loaded micelles were narrowly distributed in size with diameters of approximately 50-70 nm. Dimer derivatives of DOX as well as DOX itself were revealed to be entrapped in the micelle, the former seems to improve micelle stability due to its low water solubility and possible interaction with benzyl residues of PBLA segments through pi-pi stacking. Release of DOX compounds from the micelles proceeded in two stages: an initial rapid release was followed by a stage of slow and long-lasting release of DOX. Acceleration of DOX release can be obtained by lowering the surrounding pH from 7.4 to 5.0, suggesting a pH-sensitive release of DOX from the micelles. A remarkable improvement in blood circulation of DOX was achieved by use of PEG-PBLA micelle as a carrier presumably due to the reduced reticuloendothelial system uptake of the micelles through a steric stabilization mechanism. Finally, DOX loaded in the micelle showed a considerably higher antitumor activity compared to free DOX against mouse C26 tumor by i.v. injection, indicating a promising feature for PEG-PBLA micelle as a long-circulating carrier system useful in modulated drug delivery.     

Doxorubicin loaded pH-sensitive polymeric micelles for reversal of resistant MCF-7 tumor.

In order to overcome multidrug resistance in solid tumors, doxorubicin (DOX) loaded pH-sensitive micelles of which surface was decorated with folate (PHSM/f) were evaluated both in vitro and in vivo experiments. PHSM/f were fabricated from a mixture of two block copolymers of poly(L-histidine) (M(n): 5K)-b-PEG (M(n): 2K)-folate (polyHis/PEG-folate) (75 wt.%) and poly(L-lactic acid) (M(n): 3K)-b-PEG (M(n): 2K)-folate (PLLA/PEG-folate) (25 wt.%). The PHSM/f showed more than 90% cytotoxicity of DOX resistant MCF-7 (MCF-7/DOX(R)) when cultured with PHSM/f at a concentration of 10 microg/ml DOX. The result was interpreted by a sequential event of active internalization of PHSM/f via folate-receptor mediated endocytosis and ionization of His residues which result in micelle destabilization and probably disturbance of endosomal membranes. This potential mechanism may endow the drug carriers to bypass Pgp efflux pump and sequestration of DOX in acidic intracellular compartments, yielding high cytotyoxicity. Experimental evaluation of tumor regression was carried out in a small animal model bearing s.c. MCF-7 or MCF-7/DOX(R) xenografts. The tumor (MCF-7/DOX) volumes of mice treated with PHSM/f were significantly less than control groups treated with free DOX or similar micelles but without folate (PHSM). In the MCF-7/DOX(R) xenograft model, the accumulated DOX level of PHSM/f in solid tumors was 20 times higher than free DOX group, and 3 times higher than PHSM group. The results demonstrate that PHSM/f is a viable means for treating drug resistant tumors.     

Poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (Pluronic)/poly(epsilon-caprolactone) (PCL) amphiphilic block copolymeric nanospheres. I. Preparation and characterization.

Amphiphilic block copolymers based on PEO-PPO-PEO block copolymer (Pluronic) and poly(epsilon-caprolactone) were synthesized by bulk polymerization. The structural analysis of Pluronic/PCL block copolymer was carried out using FT-IR, 1H NMR, GPC, WAXD, DSC and TGA measurements. To prepare copolymeric nanospheres with a micellar structure, Pluronic/PCL amphiphilic block copolymers were dialyzed against water. The size and size distribution of Pluronic/PCL block copolymeric nanospheres were examined by dynamic light scattering measurement. They showed an average diameter of 116 to 196 nm depending on the type of copolymer. All the nanosphere samples exhibited a narrow size distribution. The critical micelle concentrations of Pluronic/PCL amphiphilic block copolymers determined by fluorescence spectroscopy were lower than that of common low molecular weight surfactants. We confirmed the formation of stable copolymeric nanospheres through the solution behavior of amphiphilic block copolymer in selective solvents.     

Tumor pH-responsive flower-like micelles of poly(l-lactic acid)-b-poly(ethylene glycol)-b-poly(l-histidine)

Polymeric micelles were constructed from poly(l-lactic acid) (PLA; M_n 3K)-b-poly(ethylene glycol) (PEG; M_n 2K)-b-poly(l-histidine) (polyHis; M_n 5K) as a tumor pH-specific anticancer drug carrier. Micelles (particle diameter: ∼ 80 nm; critical micelle concentration (CMC): 2 μg/ml) formed by dialysis of the polymer solution in dimethylsulfoxide (DMSO) against pH 8.0 aqueous solution, are assumed to have a flower-like assembly of PLA and polyHis blocks in the core and PEG block as the shell. The pH-sensitivity of the micelles originates from the deformation of the micellar core due to the ionization of polyHis at a slightly acidic pH. However, the co-presence of pH-insensitive lipophilic PLA block in the core prevented disintegration of the micelles and caused swelling/aggregation. A fluorescence probe study showed that the polarity of pyrene retained in the micelles increased as pH was decreased from 7.4 to 6.6, indicating a change to a more hydrophilic environment in the micelles. Considering that the size increased up to 580 nm at pH 6.6 from 80 nm at pH 7.4 and that the transmittance of micellar solution increased with decreasing pH, the micelles were not dissociated but rather swollen/aggregated. Interestingly, the subsequent decline of pyrene polarity below pH 6.6 suggested re-self-assembly of the block copolymers, most likely forming a PLA block core while polyHis block relocation to the surface. Consequently, these pH-dependent physical changes of the PLA-b-PEG-b-polyHis micelles provide a mechanism for triggered drug release from the micelles triggered by the small change in pH (pH 7.2–6.5).     

两种普朗尼克材料联合聚氰基丙烯酸正丁酯载紫杉醇的控药释放能力

背景：包含普朗尼克P123的载紫杉醇聚合物胶束能够有效的延长药物体内循环时间,并且能够改变紫杉醇的作用靶位.但是,这种紫杉醇聚合物胶束在溶液中的稳定性以及载药能力仍有待提高. 目的：观察载紫杉醇聚氰基丙烯酸正丁酯-普朗尼克P123/F68胶束的药剂学特性和体外抗肿瘤能力.方法：采用薄膜水化法,以聚氰基丙烯酸正丁酯为交联剂,普朗尼克P123/F68为载体材料,制备载疏水性药物-紫杉醇纳米胶束.应用透射电镜观察胶束形态;电位粒度分析仪测定胶束电位和粒径;高效液相色谱分析方法测定胶束载药量和包封率;荧光探针法测定胶束临界胶束浓度;体外试验考察胶束的释药情况、稳定性以及抗肿瘤情况. 结果与结论：实验制备的载药胶束为圆形,粒径和电位分别在100 nm和-10 mV左右,包封率和载药量为（93.3±2.15）%和（1.82±0.04）%,临界胶束浓度为0.067 g/L.药物体外释放试验和稳定性试验显示,该载药胶束具有一定的缓释功能和抗稀释能力.MTT试验结果表明,与游离药物相比,载药胶束具有更强的杀伤乳腺癌细胞MCF-7的能力.可见,载紫杉醇聚氰基丙烯酸正丁酯-普朗尼克P123/F68胶束具有明显的控制药物释放的能力和良好的稳定性,抗肿瘤能力强.     

Establishment of a paclitaxel resistant human breast cancer cell strain (MCF-7/Taxol) and intracellular paclitaxel binding protein analysis

Multidrug resistance of tumours is one of the most important factors that leads to chemotherapy failure. A multidrug-resistant breast cancer cell line, MCF-7/Taxol, was established from the drug-sensitive parent cell line MCF-7. The biological properties of MCF-7/Taxol, including its drug resistance profile and profile of paclitaxel binding proteins, were analysed and compared with the parent cell line. A number of paclitaxel binding proteins were present in MCF-7 cells but absent from MCF-7/Taxol cells, namely heat shock protein 90, actinin and dermcidin precursor. The identification of differential paclitaxel binding proteins between the multidrug-resistant MCF-7/Taxol cell line and the parent drug-sensitive cell line MCF-7 provides insight into possible mechanisms involved in resistance to these chemotherapy drugs.     

Polymer micelles with cross-linked polyanion core for delivery of a cationic drug doxorubicin

Polymer micelles with cross-linked ionic cores were prepared by using block ionomer complexes of poly(ethylene oxide)-b-poly(methacrylic acid) (PEO-b-PMA) copolymer and divalent metal cations as templates. Doxorubicin (DOX), an anthracycline anticancer drug, was successfully incorporated into the ionic cores of such micelles via electrostatic interactions. A substantial drug loading level (up to 50 w/w%) was achieved and it was strongly dependent on the structure of the cross-linked micelles and pH. The drug-loaded micelles were stable in aqueous dispersions exhibiting no aggregation or precipitation for a prolonged period of time. The DOX-loaded polymer micelles exhibited noticeable pH-sensitive behavior with accelerated release of DOX in acidic environment due to the protonation of carboxylic groups in the cores of the micelles. The attempt to protect the DOX-loaded core with the polycationic substances resulted in the decrease of loading efficacy and had a slight effect on the release characteristics of the micelles. The DOX-loaded polymer micelles exhibited a potent cytotoxicity against human A2780 ovarian carcinoma cells. These results point to a potential of novel polymer micelles with cross-linked ionic cores to be attractive carriers for the delivery of DOX.     

Molecular design of biodegradable polymeric micelles for temperature-responsive drug release.

We designed thermo-responsive and biodegradable polymeric micelles for an ideal drug delivery system whose target sites are where external stimuli selectively release drugs from the polymeric micelles. The thermo-responsive micelles formed from block copolymers that were composed both of a hydrophobic block and a thermo-responsive block. Poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) showing a lower critical solution temperature (LCST) around 40 degrees C was synthesized for the thermo-responsive block, while biodegradable poly(D,L-lactide), poly(epsilon-caprolactone), or poly(D,L-lactide-co-epsilon-caprolactone) was used for the hydrophobic block. By changing both the block lengths of the poly(D,L-lactide)-containing block copolymers, physical parameters such as micelle diameter and critical micelle concentration were varied. On the other hand, the choice of the hydrophobic block was revealed to be critical in relation to both on the thermo-responsive release of the incorporated anti-cancer drug, doxorubicin, and the temperature-dependent change of the hydrophobicity of the micelles' inner core. One polymeric micelle composition successfully exhibited rapid and thermo-responsive drug release while possessing a biodegradable character.     

Thermo-responsive drug delivery from polymeric micelles constructed using block copolymers of poly(N-isopropylacrylamide) and poly(butylmethacrylate).

To achieve a combination of spatial specificity in a passive manner with a stimuli-responsive targeting mechanism, a temperature-responsive polymeric micelle is prepared using block copolymers of (poly(N-isopropylacrylamide-b-butylmethacrylate) (PIPAAm-PBMA)). The micelle inner core formed by self-aggregates of PBMA segments successfully loaded with a drug (adriamycin), and the outer shell of PIPAAm chains played a role of stabilization and initiation of micellar thermo-response. Optimum conditions were investigated for the micelle formation and drug loading into the inner cores in a view of micellar stability and function as drug carriers. Outer shell hydrophilicity that prevents inner core interaction with biocomponents and other micelles can be suddenly switched to hydrophobic at a specific site by local temperature increase beyond the LCST (lower critical solution temperature) (32.5 degrees C). These micelles showed reversible structural changes allowing drug release upon heating/cooling thermal fluctuations through the LCST. Polymeric micelles incorporated with adriamycin showed a dramatic thermo-responsive on/off switching behavior for both drug release and in vitro cytotoxicity according to the temperature responsive structural changes of a micellar shell structure. The reversible and sensitive thermo-response of the micelle opens up opportunities to construct a novel drug delivery system in conjunction with localized hyperthermia.