Enhancing the vascularization of three-dimensional porous alginate scaffolds by incorporating controlled release basic fibroblast growth factor microspheres

Site-specific delivery of angiogenic growth factors from tissue-engineered devices should provide an efficient means of stimulating localized vessel recruitment to the cell transplants and would ensure cell survival and function. In the present article, we describe the construction of a novel porous alginate scaffold that incorporates tiny poly (lactic-co-glycolic acid) microspheres capable of controlling the release of angiogenic factors, such as basic fibroblast growth factor (bFGF). The microspheres are an integral part of the solid alginate matrix, and their incorporation does not affect the scaffold porosity or pore size. In vitro, bFGF was released from the porous composite scaffolds in a controlled manner and it was biologically active as assessed by its ability to induce the proliferation of cardiac fibroblasts. The controlled delivery of bFGF from the three-dimensional scaffolds accelerated the matrix vascularization after implantation on the mesenteric membrane in rat peritoneum. The number of penetrating capillaries into the bFGF-releasing scaffolds was nearly fourfold higher than into the control scaffolds (those incorporating microspheric BSA and heparin but not bFGF). At day 10 posttransplantation, capillary density in the composite scaffolds was 45 +/- 3/mm(2) and it increased to 70 +/- 7/mm(2) by day 21. The released bFGF induced the formation of large and matured blood vessels, as judged by the massive layer of mural cells surrounding the endothelial cells. The control over bFGF delivery and localizing its effects to areas of need, may aid in the wider application of bFGF in therapeutic angiogenesis as well as in tissue engineering.     

Adipose tissue engineering based on human preadipocytes combined with gelatin microspheres containing basic fibroblast growth factor

Gelatin microspheres containing basic fibroblast growth factor (bFGF) were prepared for the controlled release of bFGF. Co-implantation with the gelatin microspheres enabled preadipocytes to induce adipose tissue formation at the implanted site. Preadipocytes isolated from human fat tissue were suspended with the gelatin microspheres containing bFGF and incorporated into a collagen sponge of cell scaffold. Following subcutaneous implantation of the collagen sponge incorporating human preadipocytes, and gelatin microspheres containing 1 microg of bFGF into the back of nude mice, adipose tissue was formed at the implanted site of collagen sponge within 6 weeks postoperatively although the extent depended on the number of preadipocytes transplanted and the bFGF dose. The formation of adipose tissue was significant compared with the implantation of collagen sponge incorporating human preadipocytes and 1 microg of free bFGF. The area of adipose tissue newly formed was increased with the number of preadipocytes transplanted until to 1.0 x 10(5) cells/site and thereafter leveled off. The maximum area was observed at the bFGF dose of 1 microg/site. The area was significantly smaller at the bFGF dose of 0.5 microg/site or larger than 1 microg/site. Immunohistochemical examination indicated that the adipose tissue newly formed was composed of human matured adipocytes. No adipogenesis was observed at the implanted site of collagen sponge incorporating either gelatin microspheres containing bFGF or human preadipocytes and the mixed gelatin microspheres containing bFGF and human preadipocytes. We conclude that combination of gelatin microspheres containing bFGF and preadipocytes with the collagen sponge is essential to achieve tissue engineering of fat tissue.     

In situ regeneration of adipose tissue in rat fat pad by combining a collagen scaffold with gelatin microspheres containing basic fibroblast growth factor

This study is an investigation to evaluate in situ adipose tissue regeneration in fat pads. Gelatin microspheres with different water contents were prepared for the controlled release of basic fibroblast growth factor (bFGF). After a collagen sponge scaffold was incorporated by the microspheres containing 0, 0.01, 0.1, 1, and 10 microg of bFGF with or without syngeneic rat preadipocytes (1 x 10(5) cells/site) into a defect of rat fat pad, adipogenesis at the implanted site of scaffold was evaluated histologically. in situ formation of adipose tissue accompanied with angiogenesis was observed in the scaffold implanted with the microspheres containing 1.0 microg of bFGF, although the extent was less at the lower and higher bFGF doses. The in situ formation induced by the microspheres containing bFGF was significantly higher than that induced by free bFGF of the same dose. Adipogenesis was enhanced with time after implantation up to 4 weeks and thereafter leveled off. Such in situ adipogenesis was reproducibly induced by implantation of collagen scaffold incorporating gelatin microspheres containing 1 microg of bFGF, whereas addition of rat syngeneic preadipocytes did not promote the adipogenesis. The degradation of microspheres and the consequent FGF release became faster with an increase in the water content of gelatin microspheres. Less in situ formation of adipose tissue was observed at the lower water content of microspheres, which showed longer-term bFGF release. We conclude that combination of scaffold collagen with an appropriate controlled release of bFGF was essential to achieve the in situ formation of adipose tissue even without preadipocytes.     

Photocured, styrenated gelatin-based microspheres for de novo adipogenesis through corelease of basic fibroblast growth factor, insulin, and insulin-like growth factor I

De novo adipose tissue formation appears to proceed via two different biological events: neovascularization and spontaneous accumulation of preadipocytes and subsequent differentiation to mature adipocytes. In this article, we perform accelerated de novo adipose tissue engineering using photocured, styrenated, gelatin-based microspheres (SGMs) with different drug release rates of immobilized angiogenic and adipogenic factors. The concept of this system is to induce neovascularization and migration of endogenous preadipocytes by the rapid delivery of the angiogenic factor basic fibroblast growth factor (bFGF), followed by the proliferation and differentiation of preadipocytes into adipocytes by the prolonged delivery of the adipogenic factors, insulin and insulin-like growth factor I (IGF-I). Bioactive substance-immobilized SGMs with different drug release rates were prepared with different gelatin concentrations. An in vitro study showed the prolonged release of an immobilized model protein and the dependence of drug release rate on gelatin concentration. After the subcutaneous injections of SGMs immobilized with these bioactive substances in different combinations, the formation of masses or clusters of adipocytes was observed in rats. Triglyceride content in the injection site for the group that received bFGF-, insulin-, and IGF-I-immobilized SGMs was significantly higher than that for the group that received insulin- and IGF-I-immobilized SGMs 4 weeks after the injection of microspheres. These results suggest that the system developed here is effective for the de novo formation of adipose tissue as it enables the induction of the two-step biological reaction by single injection.     

In vitro characterization of hepatocyte growth factor release from PHBV/PLGA microsphere scaffold

Polymer scaffolds which can support cells to grow as well as deliver growth factors to the cells simultaneously have great potential for the successful regeneration of failed tissues. As popularly used vehicles to deliver anti-cancer drugs and growth factors, microspheres also show many advantages as substrates to guide the growth of cells. Therefore, we aimed to examine the feasibility of using microspheres as ideal scaffolds for liver tissue engineering. To determine the capabilities of previously used microsphere scaffold to deliver growth factors simultaneously, this work investigated a long-term (about three months) release of bovine serum albumin (BSA) from microsphere scaffolds fabricated by using two different polymers, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV, 8% PHV), poly(lactide-co-glycolide) acid (PLGA, 5050) and a blend of PLGA and PHBV. BSA served as a model for hepatocyte growth factor (HGF) since both proteins have similar molecular weights and hydrophilicity. Furthermore, HGF was encapsulated into the PLGA/PHBV composite microsphere with a core-shell structure, and sustained delivery of HGF with maintained bioactivity was achieved for at least 40 days. The moderate degradation rate (about 55% loss of the initial mass) and well-preserved structure after three months of incubation indicated that the PLGA/PHBV composite microspheres would therefore be more suitable than the pure PHBV or PLGA microspheres as a scaffold for engineering liver tissue.     

Functionalized PLGA-doped zirconium oxide ceramics for bone tissue regeneration

Bone tissue engineering is an alternative approach to bone grafts. In our study we aim to develop a composite scaffold for bone regeneration made of doped zirconium oxide (ZrO₂) conjugated with poly(lactic-co-glycolic acid) (PLGA) particles for the delivery of growth factors. In this composite, the PLGA microspheres are designed to release a crucial growth factor for bone formation, bone morphogenetic protein-2 (BMP2). We found that by changing the polymer’s molecular weight and composition, we could control microsphere loading, release and size. The BMP2 released from PLGA microspheres retained its biological activity and increased osteoblastic marker expression in human mesenchymal stem cells (hMSCs). Uncapped PLGA microspheres were conjugated to ZrO₂ scaffolds using carbodiimide chemistry, and the composite scaffold was shown to support hMSCs growth. We also demonstrated that human umbilical vein endothelial cells (HUVECs) can be co-cultured with hMSCs on the ZrO₂ scaffold for future vascularization of the scaffold. The ZrO₂ composite scaffold could serve as a bone substitute for bone grafting applications with the added ability of releasing different growth factors needed for bone regeneration.     

Tissue regeneration based on growth factor release

Tissue engineering is an emerging biomedical field intended to assist the regeneration of body tissue defects too large to self-repair as well as to substitute for the biological functions of damaged and injured organs by using cells with proliferative and differentiative potential. In addition to basic research on such cells, it is undoubtedly indispensable for successful tissue engineering to create an artificial environment enabling cells to induce tissue regeneration. Such an environment can be achieved by making use of a scaffold for cell proliferation and differentiation and for growth factors, as well as their combination. Growth factors are often required to promote tissue regeneration, as they can induce angiogenesis, which supplies oxygen and nutrients to cells transplanted for organ substitution to maintain their biological functions. However, the biological effects of growth factors cannot always be expected because of their poor in vivo stability, unless a drug delivery system is contrived. In this article, tissue regeneration based on the release of growth factors is reviewed to emphasize the significance of drug delivery systems in tissue engineering.     

Time course of de novo adipogenesis in matrigel by gelatin microspheres incorporating basic fibroblast growth factor

Controlled release of basic fibroblast growth factor (bFGF) from gelatin microspheres achieved de novo adipogenesis at the implanted site of a basement membrane extract (Matrigel). Following subcutaneous co-implantation of Matrigel and gelatin microspheres incorporating 0.1 microg of bFGF into the back of mice, adipose tissue was formed at the implanted site after 4 weeks postoperatively although the extent increased with implantation time. Formation of adipose tissue was significantly faster than the co-implantation of Matrigel, and 0.1 microg of free bFGF while a larger volume of the adipose tissue formed was retained 15 weeks later. When measured in Matrigel co-implanted with the gelatin microspheres incorporating bFGF, the number of cells infiltrated into Matrigel increased to a significantly high extent compared with the bFGF co-implantation. Matrigel alone was much less effective in inducing formation of adipose tissue. We conclude that gelatin microspheres incorporating bFGF enable Matrigel to efficiently induce de novo adipogenesis at the implanted site in respect to the formation rate and volume of adipose tissue.     

High-efficiency cell seeding method by relatively hydrophobic culture strategy

Cell adhesion efficiency is one of the key factors affecting the results of manufacturing tissue engineering constructs. High efficiency is required for seeding low proliferation cells onto scaffolds. In this study, we designed a strategy to improve the efficiency of cell adhesion using hydrophobic cell culture environment to enhance cells adhering to a scaffold. Cells have lower affinity to the surface of polydimethylsiloxane (PDMS) than tissue culture polystyrene (TCPS) plates. When cells were cultured with gelatin microspheres or chitosan films in a PDMS-coated plate instead of a normal TCPS plate, there was a significant increase in cell attachment efficiency. Cells cultured in the PDMS-coated system tended to selectively attach onto the gelatin microspheres or chitosan films, which are relatively more hydrophilic than the PDMS surface. However, minimal cell attachment on gelatin microspheres or chitosan films was observed when gelatin microspheres or chitosan films were placed in normal TCPS plate. Cell counting experiments with gelatin microspheres in the PDMS-coated system resulted in a cell attachment efficiency of 89.8% after 1 day of cultivation, whereas the cell attachment efficiency was less than 1% in normal TCPS plate. The results demonstrate that the method is easy to use and could be useful for fast cultivation of cell-scaffold constructs.     

生物可降解聚合物结合碱性成纤维细胞生长因子与内皮细胞的黏附

背景：可降解材料的应用是体外构建小口径组织工程血管的重要研究部分。如何对可降解材料进行改性,以利于材料本身体外抗凝与促进内皮细胞黏附,是目前血管组织工程研究的热点之一。 目的：利用可降解聚己内酯接枝肝素材料体外负载碱性成纤维细胞生长因子,观察其对于内皮细胞黏附的影响。 方法：应用聚己内酯可降解材料,将肝素活化后并与聚己内酯的端羟基发生酯化反应从而被锚定在聚己内酯两端。经过电纺丝技术,制备血管支架。同时利用肝素和生长因子间的静电吸附作用,使支架负载碱性成纤维细胞生长因子。采用低密度内皮细胞短期静态种植,观察负载细胞生长因子的可降解聚己内酯材料对内皮细胞生长黏附情况的影响。 结果与结论：成功地制备了负载成纤维细胞生长因子的可降解聚己内酯接枝肝素支架。内皮黏附实验证实,该支架利于内皮细胞黏附。提示可降解聚己内酯接枝肝素材料负荷碱性细胞生长因子支架对内皮细胞有很好的体外黏附性。     

Growing tissue-like constructs with Hep3B/HepG2 liver cells on PHBV microspheres of different sizes

In this study, an oil-in-water emulsion solvent evaporation technique was used to fabricate poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV, 8% PHV), microspheres as scaffold, to guide liver cell growth. Human hepatoma cell lines, HepG2 and Hep3B, were cultured in vitro on both the microspheres and polymer films. SEM and optical microscope images showed that multilayer cells were formed among the microspheres to bridge them together and developed into cell-construct aggregates after 1 week of culture. MTT results showed that the cell proliferation on the microspheres was more than two times higher than that on the films after 12 days of culture. The cells seeded on microspheres secreted albumin 2-4 times more than that on the positive control after 1 week of culture, which indicated that this hepatic function was greatly improved by the aggregation of cells on microspheres. Although HepG2 failed to express P-450 activity, this hepatic function was preserved when Hep3B cultured on microspheres. All the results indicated that PHBV microspheres are appropriate scaffolds for liver tissue engineering.     

Long-term culture of HL-1 cardiomyocytes in modular poly(ethylene glycol) microsphere-based scaffolds crosslinked in the phase-separated state

Poly(ethylene glycol) (PEG) microspheres were assembled around HL-1 cardiomyocytes to produce highly porous modular scaffolds. In this study we took advantage of the immiscibility of PEG and dextran to improve upon our previously described modular scaffold fabrication methods. Phase separating the PEG microspheres in dextran solutions caused them to rapidly deswell and crosslink together, eliminating the need for serum protein-based crosslinking. This also led to a dramatic increase in the stiffness of the scaffolds and greatly improved the handling characteristics. HL-1 cardiomyocytes were present during microsphere crosslinking in the cytocompatible dextran solution, exhibiting high cell viability following scaffold formation. Over the course of 2 weeks a 9-fold expansion in cell number was observed. The cardiac functional markers sarcomeric α-actinin and connexin 43 were expressed at 13 and 24 days after scaffold formation. HL-1 cells were spontaneously depolarizing 38 days after scaffold formation, which was visualized by confocal microscopy using a calcium-sensitive dye. Electrical stimulation resulted in synchronization of activation peaks throughout the scaffolds. These findings demonstrate that PEG microsphere scaffolds fabricated in the presence of dextran can support the long-term three-dimensional culture of cells, suggesting applications in cardiovascular tissue engineering.     

Induction of endometrial mesenchymal stem cells into tissue-forming cells suitable for fascial repair

Pelvic organ prolapse is a major hidden burden affecting almost one in four women. It is treated by reconstructive surgery, often augmented with synthetic mesh. To overcome the growing concerns of using current synthetic meshes coupled with the high risk of reoperation, a tissue engineering strategy has been developed, adopting a novel source of mesenchymal stem cells. These cells are derived from the highly regenerative endometrial lining of the uterus (eMSCs) and will be delivered in vivo using a new gelatin-coated polyamide scaffold. In this study, gelatin properties were optimized by altering the gelatin concentration and extent of crosslinking to produce the desired gelation and degradation rate in culture. Following cell seeding of uncoated polyamide (PA) and gelatin-coated meshes (PA + G), the growth rate of eMSCs on the PA + G scaffolds was more than that on the PA alone, without compromising cell shape. eMSCs cultured on the PA + G scaffold retained their phenotype, as demonstrated by W5C5/SUSD2 (eMSC-specific marker) immunocytochemistry. Additionally, eMSCs were induced to differentiate into smooth muscle cells (SMC), as shown by immunofluorescence for smooth muscle protein 22 and smooth muscle myosin heavy chain. eMSCs also differentiated into fibroblast-like cells when treated with connective tissue growth factor with enhanced detection of Tenascin-C and collagen type I as well as new tissue formation, as seen by Masson’s trichrome. In summary, it was demonstrated that the PA + G scaffold is an appropriate platform for eMSC delivery, proliferation and differentiation into SMC and fibroblasts, with good biocompatibility and the capacity to regenerate neo-tissue.     

Enhanced Angiogenic Efficacy through Controlled and Sustained Delivery of FGF-2 and G-CSF from Fibrin Hydrogels Containing Ionic-Albumin Microspheres

Neo-vessel formation in ischemic tissues relies on numerous growth factors and cell fractions for the formation of mature, stable, functional vasculature. However, the efforts to regenerate tissues typically rely on the administration of a single growth factor or cells alone. Conversely, polymeric matrices have been investigated extensively to deliver multiple growth factors at pre-determined rates to form stable blood vessels in ischemic tissues. We report on a novel sequential delivery system of a fibrin hydrogel containing ionic-albumin microspheres that allows for the controlled release of two growth factors. The use of this system was investigated in the context of therapeutic angiogenesis. Material properties were determined based on degree of swelling measurements and degradation characteristics. Release kinetics of model angiogenic polypeptides FGF-2 and G-CSF were determined using ELISA and the bioactivity of released protein was evaluated in human endothelial cell cultures. The release of growth factors from ionic-albumin microspheres was significantly delayed compared to the growth factor released from fibrin matrices in the absence of spheres. The scaffolds were implanted in a murine critical limb ischemia model at two concentrations, 40 ng (low) and 400 ng (high), restoring 92% of the blood flow in a normally perfused limb using a fibrin hydrogel releasing FGF-2 containing albumin–PLL microspheres releasing G-CSF (measured by LDPI at the high concentration), a 3.2-fold increase compared to untreated limbs. The extent of neo-vessel formation was delineated by immunohistochemical staining for capillary density (CD-31+) and mature vessel formation (α-SMA+). In conclusion, our study demonstrated that the release kinetics from our scaffold have distinct kinetics previously unpublished and the delivery of these factors resulted in hindlimb reperfusion, and robust capillary and mature vessel formation after 8 weeks compared to either growth factor alone or bolus administration of growth factor.     

Enhanced angiogenic efficacy through controlled and sustained delivery of FGF-2 and G-CSF from fibrin hydrogels containing ionic-albumin microspheres

Neo-vessel formation in ischemic tissues relies on numerous growth factors and cell fractions for the formation of mature, stable, functional vasculature. However, the efforts to regenerate tissues typically rely on the administration of a single growth factor or cells alone. Conversely, polymeric matrices have been investigated extensively to deliver multiple growth factors at pre-determined rates to form stable blood vessels in ischemic tissues. We report on a novel sequential delivery system of a fibrin hydrogel containing ionic-albumin microspheres that allows for the controlled release of two growth factors. The use of this system was investigated in the context of therapeutic angiogenesis. Material properties were determined based on degree of swelling measurements and degradation characteristics. Release kinetics of model angiogenic polypeptides FGF-2 and G-CSF were determined using ELISA and the bioactivity of released protein was evaluated in human endothelial cell cultures. The release of growth factors from ionic-albumin microspheres was significantly delayed compared to the growth factor released from fibrin matrices in the absence of spheres. The scaffolds were implanted in a murine critical limb ischemia model at two concentrations, 40 ng (low) and 400 ng (high), restoring 92% of the blood flow in a normally perfused limb using a fibrin hydrogel releasing FGF-2 containing albumin-PLL microspheres releasing G-CSF (measured by LDPI at the high concentration), a 3.2-fold increase compared to untreated limbs. The extent of neo-vessel formation was delineated by immunohistochemical staining for capillary density (CD-31+) and mature vessel formation (α-SMA+). In conclusion, our study demonstrated that the release kinetics from our scaffold have distinct kinetics previously unpublished and the delivery of these factors resulted in hindlimb reperfusion, and robust capillary and mature vessel formation after 8 weeks compared to either growth factor alone or bolus administration of growth factor.     

Design of a composite biomaterial system for tissue engineering applications

Biomaterials that regulate vascularized tissue formation have the potential to contribute to new methods of tissue replacement and reconstruction. The goal of this study was to develop a porous, degradable tissue engineering scaffold that could deliver multiple growth factors and regulate vessel assembly within the porous structure of the material. Porous hydrogels of poly(ethylene glycol)-co-(l-lactic acid) (PEG–PLLA) were prepared via salt leaching. The degradation time of the hydrogels could be controlled between 1 and 7 weeks, based on hydrogel composition. Fibrin was incorporated into the interconnected pores of the hydrogels to promote neovascularization and as a reservoir for rapid (<5 days) growth factor delivery. Poly(lactic-co-glycolic acid) (PLGA) microspheres were incorporated into the degradable polymeric hydrogel scaffold to allow sustained (>30 days) growth factor delivery. Fibroblast growth factor-1 (FGF-1) and platelet-derived growth factor-BB (PDGF-BB) were delivered from the system owing to their roles in the promotion of angiogenesis and vascular stabilization, respectively. Hydrogels tested in vivo with a subcutaneous implantation model were selected based on the results from in vitro degradation and growth factor release kinetics. Dual growth factor delivery promoted significantly more tissue ingrowth in the scaffold compared with blank or single growth factor delivery. The sequential delivery of FGF-1 following PDGF-BB promoted more persistent and mature blood vessels. In conclusion, a biomaterials system was developed to provide structural support for tissue regeneration, as well as delivery of growth factors that stimulate neovascularization within the structure prior to complete degradation.     

Novel scaffolds fabricated from protein-loaded microspheres for tissue engineering

Biodegradable scaffolds play an important role in tissue engineering by providing physical and biochemical support for both differentiated and progenitor cells. Here, we describe a novel method for incorporating proteins in 3D biodegradable scaffolds by utilizing protein-loaded microspheres as the building blocks for scaffold formation. Poly(l,d-lactic-co-glycolic acid) (PLGA) microspheres containing bovine serum albumin (BSA) were fused into scaffolds using dichloromethane vapor for various time intervals. Microspheres containing 0, 0.4, 1.5, 4.3% BSA showed that increased protein loading required increased fusion time for scaffold fabrication. Protein release from the scaffolds was quantified in vitro over 20 days and compared to that of loose microspheres. Scaffolds had a slightly lower (up to 20%) release over the first 10 days, however, the cumulative release from both microspheres and scaffolds at the end of the study was not statistically different and the rate of release was the same, indicating that microsphere release can be predictive of scaffold kinetics. Scaffolds fused from larger (113.3 +/- 58.0 microm) rather than smaller (11.15 +/- 11.08 microm) microspheres, generated pores on the order of 200 microm as compared to 20 microm, respectively, showing control over pore size. In addition, four dyes (carbon black, acid green, red 27, and fast green FCF) were encapsulated in PLGA microspheres and fused into homogeneous and partitioned scaffolds, indicating control over spatial distribution within the scaffold. Finally, the scaffolds were seeded with fibroblast cells, which attached and were well spread over the polymer surface after 4h of incubation. These results highlight the versatility of this simple scaffold fusion method for incorporating essentially any combination of loaded microspheres into a 3D structure, making this a powerful tool for tissue engineering and drug delivery applications.     

In vitro localization of bone growth factors in constructs of biodegradable scaffolds seeded with marrow stromal cells and cultured in a flow perfusion bioreactor

Tissue engineering strategies aim at controlling the behavior of individual cells to stimulate tissue formation. This control is achieved by mimicking signals that manage natural tissue development or repair. Flow perfusion bioreactors that create culture environments with minimal diffusion constraints and provide cells with mechanical stimulation may closely resemble in vivo conditions for bone formation. Therefore, these culturing systems, in conjunction with an appropriate scaffold and cell type, may provide significant insight towards the development of in vitro tissue engineering models leading to improved strategies for the construction of bone tissue substitutes. The objective of this study was to investigate the in vitro localization of several bone growth factors that are usually associated with bone formation in vivo by culturing rat bone marrow stromal cells seeded onto starch-based biodegradable fiber meshes in a flow perfusion bioreactor. The localization of several bone-related growth factors-namely, transforming growth factor-beta1, platelet-derived growth factor- A, fibroblast growth factor-2, vascular endothelial growth factor, and bone morphogenetic protein- 2-was determined at two different time points in scaffolds cultured under perfusion conditions at two different flow rates using an immunohistochemistry technique. The results show the presence of regions positively stained for all the growth factors considered, except platelet-derived growth factor-A. Furthermore, the images obtained from the positively stained sections suggest an increase in the immunohistochemically stained area at the higher flow rate and culture time. These observations demonstrate that flow perfusion augments the functionality of scaffold/cell constructs grown in vitro as it combines both biological and mechanical factors to enhance cell differentiation and cell organization within the construct. This study also shows that flow perfusion bioreactor culture of marrow stromal cells, combined with the use of appropriate biodegradable fiber meshes, may constitute a useful model to study bone formation and assess bone tissue engineering strategies in vitro.     

PHBV microspheres as neural tissue engineering scaffold support neuronal cell growth and axon-dendrite polarization

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microspheres, with properties such as slower degradation and more efficient drug delivery properties, have important benefits for neural tissue engineering. Our previous studies have shown PHBV microspheres to improve cell growth and differentiation. This study aimed to investigate if PHBV microspheres would support neurons to extend these benefits to neural tissue engineering. PHBV microspheres' suitability as neural tissue engineering scaffolds was investigated using PC12 cells, cortical neurons (CNs), and neural progenitor cells (NPCs) to cover a variety of neuronal types for different applications. Microspheres were fabricated using an emulsion-solvent-evaporation technique. DNA quantification, cell viability assays, and immunofluorescent staining were carried out. PC12 cultures on PHBV microspheres showed growth trends comparable to two-dimensional controls. This was further verified by staining for cell spreading. Also, CNs expressed components of the signaling pathway on PHBV microspheres, and had greater axon-dendrite segregation (4.1 times for axon stains and 2.3 times for dendrite stains) than on coverslips. NPCs were also found to differentiate into neurons on the microspheres. Overall, the results indicate that PHBV microspheres, as scaffolds for neural tissue engineering, supported a variety of neuronal cell types and promoted greater axon-dendrite segregation.     

Development of an injectable,in situ crosslinkable,degradable polymeric carrier for osteogenic cell populations. Part 2. Viability of encapsulated marrow stromal osteoblasts cultured on crosslinking poly(propylene fumarate)

The effect of temporary encapsulation of rat marrow stromal osteoblasts in crosslinked gelatin microparticles on cell viability and proliferation was investigated in this study for microparticles placed on a crosslinking poly(propylene fumarate) (PPF) composite over a 7 day time period. Encapsulated cells were seeded on crosslinking PPF composites at times up to 10 min following initiation of the crosslinking reaction, and also on fully crosslinked PPF composites and tissue culture polystyrene controls, with a cell seeding density of 5.3 x 10(4) cells/cm2. The crosslinked PPF composite exhibited an average gel point of 10.3 min and an average maximum crosslinking temperature of 47.5 degrees C. Cell viability and proliferation were assessed by DNA and 3H-thymidine assays and the results were compared with those for nonencapsulated cells. The results showed that the addition time of cells to a crosslinking PPF composite had a large effect on cell viability and proliferation for both encapsulated and nonencapsulated cells with more surviving cells added at later time points. Most importantly, the temporary encapsulation of cells significantly enhanced cell viability at earlier time points. The data indicate that the presence of gelatin microparticles does not affect the crosslinking of a PPF composite. They further suggest that the temporary encapsulation of cells in crosslinked gelatin microparticles may preserve the viability of cells contained in an actively crosslinking PPF composite used as an injectable polymeric scaffold serving also as a carrier for osteogenic cell populations.