戊二醛一步固化法制备氟尿嘧啶壳聚糖微球

以壳聚糖为载体,戊二醛为交联剂,氟尿嘧啶为模型药物,采用一步固化法制备氟尿嘧啶壳聚糖微球制剂.以外观和包封率为指标优化了处方,并考察了交联剂浓度和交联时间对微球体外释放行为及溶胀度的影响.采用扫描电镜和红外光谱对微球结构进行表征.所得载药微球的载药量和包封率为33.5%、51.2%,平均粒径为(6.8±1.8)μm,30 min 时突释量为33.5%.     

Synthesis and characterization of cross-linked chitosan microspheres for drug delivery applications

The present study deals with the synthesis and characterization of cross-linked chitosan microspheres containing an hydrophilic drug, hydroquinone. The microspheres were prepared by the suspension cross-linking method using glutaraldehyde as the cross-linking agent of the polymer matrix. Perfectly spherical cross-linked hydrogel microspheres loaded with hydroquinone were obtained in the size range of 20–100 μm. The effect of the degree of polymer cross-linking, chitosan molecular weight, chitosan concentration and amount of the encapsulated drug on the hydroquinone release kinetics was extensively investigated. It was found that slower drug release rates were obtained from microspheres prepared by using a higher initial concentration of chitosan, a higher molecular weight of chitosan or/and a lower drug concentration. Most importantly, it was shown that the release rate of hydroquinone was mainly controlled by the polymer cross-linking density and, thus, by the degree of swelling of the hydrogel matrix.     

Synthesis and characterization of cross-linked chitosan microspheres for drug delivery applications

The present study deals with the synthesis and characterization of cross-linked chitosan microspheres containing an hydrophilic drug, hydroquinone. The microspheres were prepared by the suspension cross-linking method using glutaraldehyde as the cross-linking agent of the polymer matrix. Perfectly spherical cross-linked hydrogel microspheres loaded with hydroquinone were obtained in the size range of 20-100 microm. The effect of the degree of polymer cross-linking, chitosan molecular weight, chitosan concentration and amount of the encapsulated drug on the hydroquinone release kinetics was extensively investigated. It was found that slower drug release rates were obtained from microspheres prepared by using a higher initial concentration of chitosan, a higher molecular weight of chitosan or/and a lower drug concentration. Most importantly, it was shown that the release rate of hydroquinone was mainly controlled by the polymer cross-linking density and, thus, by the degree of swelling of the hydrogel matrix.     

Development and in vitro evaluations of gelatin A microspheres of ketorolac tromethamine for intranasal administration

Gelatin A microspheres (MS) of ketorolac tromethamine (KT) for intranasal systemic delivery were developed with the aim to avoid gastro-intestinal complications, to improve patient compliance, to use as an alternative therapy to conventional dosage forms, to achieve controlled blood level profiles, and to obtain improved therapeutic efficacy in the treatment of postoperative pain and migraine. Gelatin A microspheres were prepared using the emulsification-crosslinking technique. The drug was dispersed in polymer gelatin and formulated into a w/o emulsion with liquid paraffin, using glutaraldehyde as a crosslinking agent. The formulation variables were drug loading and the concentrations of polymer (gelatin), co-polymer (chitosan) and the crosslinking agent. All the prepared microspheres were evaluated for physical characteristics, such as particle size, incorporation efficiency, swelling ability, in vitro bioadhesion on rabbit small intestine and in vitro drug release characteristics in pH 6.6 phosphate buffer. All the microspheres showed good bioadhesive properties. Gelatin A and chitosan concentrations, percentage of the crosslinking agent and also the drug loading affected significantly the rate and extent of drug release. The data indicated that the KT release followed Higuchi's matrix model.     

Controlled release chitosan microspheres of mirtazapine: In vitro and in vivo evaluation

The purpose of the study was to formulate and evaluate controlled release chitosan microspheres of mirtazapine (MTZ) to improve the bioavailability by altering the pharmacokinetic profiles of the drug. Chitosan microspheres were prepared to prolong the release of the drug into the systemic circulation. Microspheres were prepared by a single water in oil (w/o) emulsion technique varying the chitosan/drug ratio, stirring speed and concentration of the crosslinking agent (glutaraldehyde). Drug-polymer compatibility studies were carried out using fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). The microspheres were evaluated for encapsulation efficiency, particle size, surface morphology, swelling index, in vitro release, as well as erosion and in vivo studies in rats. The FT-IR and DSC studies revealed no interaction between drug and polymer. The encapsulation efficiency of different formulation varied from 53 ± 1.2% to 78 ± 1.5%. The mean particle size of the optimized formulation F-14 was 106.4 ± 0.5 μm. Surface morphology revealed that chitosan microspheres were discrete and spherical in shape with a porous surface. The release of MTZ from chitosan microspheres was rapid up to 4 h, and then it was continuously and slowly released up to 48 h. Optimized formulation (F-14) was found to be stable under accelerated storage conditions based on International Conference on Harmonisation guidelines. Pharmacokinetic studies revealed that the optimized formulation showed significant increases in systemic exposure (AUC = 177.70 ± 7.39 μg·h/mL), half-life (4.72 ± 0.46 h) and reduced clearance (0.009 ± 0.0001 L/h) compared to pure drug administration. Hence, the present study demonstrates that controlled release formulation of MTZ microspheres using chitosan can improve pharmacokinetic profiles of MTZ.     

Chitosan-based mucoadhesive microspheres of clarithromycin as a delivery system for antibiotic to stomach

The objective of the present study was to develop chitosan-based mucoadhesive microspheres of clarithromycin to provide prolonged contact time for drug delivery of antibiotics to treat stomach ulcers. Microspheres based mucoadhesive formulation were extensively evaluated and characterized for in vitro performance followed by investigation of in vivo pharmacokinetics in rats. Microspheres were prepared by emulsification technique using glutaraldehyde as a crosslinking agent. Formulation conditions were optimized for percent drug entrapment and mucoadhesion, by varying different formulation and process parameters like drug to polymer ratio, concentration of crosslinking agent and time of crosslinking. Prepared microspheres were evaluated extensively for particle size, percent drug entrapment, swelling kinetics, in vitro mucoadhesion using rat stomach membrane and in vitro drug release studies. In vitro permeation studies across rat stomach membrane were carried out to determine diffusion parameters and drug retention in the stomach membrane of the formulation and the plain drug. Finally in vivo performance of microsphere formulation in comparison to plain drug was evaluated by pharmacokinetic studies in albino rats. Drug entrapment upto 74% was obtained. Swelling studies indicated that with an increase in cross-linking, the swelling ability decreased. The in vitro drug release and in vitro mucoadhesion studies showed a dependence on the extent of cross-linking and concentration of chitosan. Extent of cross-linking exhibited an inverse relation to drug release rate as well as mucoadhesion, whereas polymer concentration exhibited an inverse correlation with drug release while linear relationship with mucoadhesion (up to 86%). In vitro permeation studies across stomach tissue showed higher accumulation of drug in the stomach tissue with microspheres formulation as compared to that of free drug. This is evident from higher value of K (partition coefficient) and Qm/Csf values for microspheres (68.34 and 106.42X10(3), respectively) as compared to that of free drug (1.86 and 173.00, respectively). These findings when analyzed showed an increase in the bioavailability of clarithromycin from microsphere formulation as compared to plain drug suspension in vivo, with AUC 0-->alpha being 91.7 (microg h/ml)and 24.9 (microg h/ml) respectively. Results of the study demonstrated good mucoadhesion of the microspheres with the stomach mucosa as well as higher accumulation of drug in the stomach membrane. Microspheres also exhibited sustained release of drug. Thus chitosan microspheres appear, technically, promising mucoadhesive drug delivery systems for delivering clarithromycin to treat stomach ulcers.     

Novel hydrogel microspheres of chitosan and pluronic F-127 for controlled release of 5-fluorouracil

Hydrogel microspheres of chitosan (CS) and Pluronic F127 (PF-127) were prepared by the emulsion-crosslinking method employing glutaraldehyde (GA) as a crosslinker. 5-Fluorouracil (5-FU), an anticancer drug with good water solubility, was encapsulated into hydrogel microspheres. Various formulations were prepared by varying the ratio of CS and PF-127, % drug loading and amount of GA. Microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy to confirm the absence of chemical interactions between drug, polymer and the crosslinking agent. Scanning electron microscopy (SEM) was performed to study the surface morphology of the microspheres. SEM showed that microspheres have smooth shiny surfaces. Particle size, as measured by laser light scattering technique, gave an average size ranging from 110 to 382?µm. Differential scanning calorimetry (DSC) and X-ray diffraction (X-RD) studies were performed to understand the crystalline nature of the drug after encapsulation into hydrogel microspheres. Encapsulation of the drug up to 86% achieved was measured by UV spectroscopy. Equilibrium swelling experiments were performed in distilled water. Diffusion coefficients (D) of water through microspheres were estimated by an empirical equation. In vitro release studies indicated the dependence of release rate on the extent of crosslinking, drug loading and the amount of PF-127 used to produce the microspheres; slow release was extended up to 24?h. The release data were also fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release mechanism followed the non-Fickian trend.     

Novel hydrogel microspheres of chitosan and pluronic F-127 for controlled release of 5-fluorouracil

Hydrogel microspheres of chitosan (CS) and Pluronic F127 (PF-127) were prepared by the emulsion-crosslinking method employing glutaraldehyde (GA) as a crosslinker. 5-Fluorouracil (5-FU), an anticancer drug with good water solubility, was encapsulated into hydrogel microspheres. Various formulations were prepared by varying the ratio of CS and PF-127, % drug loading and amount of GA. Microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy to confirm the absence of chemical interactions between drug, polymer and the crosslinking agent. Scanning electron microscopy (SEM) was performed to study the surface morphology of the microspheres. SEM showed that microspheres have smooth shiny surfaces. Particle size, as measured by laser light scattering technique, gave an average size ranging from 110 to 382 microm. Differential scanning calorimetry (DSC) and X-ray diffraction (X-RD) studies were performed to understand the crystalline nature of the drug after encapsulation into hydrogel microspheres. Encapsulation of the drug up to 86% achieved was measured by UV spectroscopy. Equilibrium swelling experiments were performed in distilled water. Diffusion coefficients (D) of water through microspheres were estimated by an empirical equation. In vitro release studies indicated the dependence of release rate on the extent of crosslinking, drug loading and the amount of PF-127 used to produce the microspheres; slow release was extended up to 24 h. The release data were also fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release mechanism followed the non-Fickian trend.     

Chitosan microspheres for intrapulmonary administration of moxifloxacin: interaction with biomembrane models and in vitro permeation studies.

Chitosan microspheres loaded moxifloxacin were prepared to obtain sustained release of the drug after intrapulmonary administration. The microspheres were produced by the spray-drying method using glutaraldehyde as the crosslinking agent. The particles were spherical with a smooth but distorted surface morphology and were of small size, ranging from 2.5 to 6.0microm, thus suitable for inhalation. In vitro release studies showed a significant burst effect for all crosslinked systems, followed by a prolonged moxifloxacin release, particularly in the presence of the highest glutaraldehyde concentration. Lipid vesicles made of dipalmitoylphosphatidylcholine (DPPC) were used as an in vitro biomembrane model to evaluate the influence of chitosan microspheres on the interaction of moxifloxacin with biological membranes. Differential scanning calorimetry was used as a simple and non-invasive technique of analysis. Moxifloxacin freely permeates through DPPC liposomes, interacting with the hydrophobic zone of the bilayers (lowering of the DeltaH value and loss of the cooperativity of the main transition peak). Uncrosslinked microspheres rapidly swelled and dissolved releasing free chitosan that was able to interact with liposomes (increase of DeltaH value), probably altering the biomembrane permeability to the drug. Crosslinked microspheres did not show this property. Pulmonary absorption of moxifloxacin-loaded chitosan microspheres was evaluated compared to the free drug. A monolayer of Calu-3 human bronchial epithelial cells mounted on Franz diffusion cells was used as an in vitro bronchial epithelium model. Microspheres retard the absorption of moxifloxacin and within 6h the cumulative amount of permeated drug was about 18%, 11% and 7% (w/w) for free moxifloxacin, moxifloxacin-loaded crosslinked and moxifloxacin-loaded uncrosslinked microspheres, respectively.     

Biodegradable microspheres of curcumin for treatment of inflammation

Curcumin, a natural constituent of Curcuma longa (turmeric, CAS 458-37-7) was formulated as prolonged release biodegradable microspheres for treatment of inflammation. Natural biodegradable polymers, namely, bovine serum albumin and chitosan were used to encapsulate curcumin to form a depot forming drug delivery system. Microspheres were prepared by emulsion-solvent evaporation method coupled with chemical cross-linking of the natural polymers. Curcumin could be encapsulated into the biodegradable carriers upto an extent of 79.49 and 39.66% respectively with albumin and chitosan. Different drug:polymer ratios did not affect the mean particle size or particle size distribution significantly. However, the concentration of the crosslinking agent had remarkable influence on the drug release. In-vitro release studies indicated a biphasic drug release pattern, characterized by a typical burst-effect followed by a slow release which continued for several days. Evaluation of antinflammatory activity using Freund's adjuvant induced arthritic model in Wistar rats revealed significant difference between both the formulations, albumin microspheres and chitosan micropheres as well as against control. It was evident from the present study that the curcumin biodegradable microspheres could be successfully employed as prolonged release drug delivery system for better therapeutic management of inflammation as compared to oral or subcutaneous route.     

Lacidipine encapsulated gastroretentive microspheres prepared by chemical denaturation for pylorospasm

The purpose of this research work was to formulate and systematically evaluate in vitro performance of mucoadhesive microspheres of lacidipine for treatment of pylorospasm. Lacidipine microspheres containing chitosan were prepared by chemical denaturation using glutaraldehyde as a cross-linking agent. The microspheres were evaluated for physical characteristics such as particle size, particle shape and surface morphology by scanning electron microscopy, drug entrapment efficiency and in vitro mucoadhesion. Results of preliminary trials indicated that the polymer concentration, cross-linking agent and stirring speed had a noticeable effect on size and surface morphology. A central composite design was employed to study the effect of independent variables, polymer concentration (X(1)), volume of glutaraldehyde (X(2)), stirring speed (X(3)) and cross-linking time (X(4)) on dependent variables, drug entrapment efficiency and percentage mucoadhesion. The entrapment efficiency varied from 14-40.82% depending upon the polymer concentration, volume of cross-linker and stirring speed. All batches of microspheres exhibited good mucoadhesive property (73-83%) in the in vitro wash-off test. It was observed that polymer concentration and glutaraldehyde volume had a more significant effect on the dependent variables. Maximum entrapment (36.53%) and mucoadhesion (81.33%) was predicted at 3.5% chitosan, 3 ml glutaraldehyde, 3000 rpm stirring speed and 75 min cross-linking time under optimized process condition. The selected formulation showed controlled release for more than 6 h. The release followed Higuchi kinetics via a Fickian diffusion.     

Novel interpenetrating network chitosan-poly(ethylene oxide-g-acrylamide) hydrogel microspheres for the controlled release of capecitabine

This paper describes the synthesis of capecitabine-loaded semi-interpenetrating network hydrogel microspheres of chitosan-poly(ethylene oxide-g-acrylamide) by emulsion crosslinking using glutaraldehyde. Poly(ethylene oxide) was grafted with polyacrylamide by free radical polymerization using ceric ammonium nitrate as a redox initiator. Capecitabine, an anticancer drug, was successfully loaded into microspheres by changing experimental variables such as grafting ratio of the graft copolymer, ratio of the graft copolymer to chitosan, amount of crosslinking agent and percentage of drug loading in order to optimize process variables on drug encapsulation efficiency, release rates, size and morphology of the microspheres. A 2(4) full factorial design was employed to evaluate the combined effect of selected independent variables on percentage of drug release at 5h (response). Regression models were used for the response and data were compared statistically using the analysis of variance (ANOVA). Grafting, interpenetrating network formation and chemical stability of the capecitabine after encapsulation into microspheres was confirmed by Fourier infrared spectra (FTIR). Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) studies were made on drug-loaded microspheres to investigate the crystalline nature of drug after encapsulation. Results indicated amorphous dispersion of capecitabine in the polymer matrix. Scanning electron microscope (SEM) confirmed spherical shapes and smooth surface morphology of the microspheres. Mean particle size of the microspheres as measured by the laser light scattering technique ranged between 82 and 168microm. Capecitabine was successfully encapsulated into semi-IPN microspheres and percentage of encapsulation efficiency varied from 79 to 87. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2h, followed by simulated intestinal fluid (pH 7.4) until complete dissolution. The release of capecitabine was continued up to 10h. Release data were fitted to an empirical relationship to estimate the transport parameters. Dynamic swelling studies were performed in the simulated intestinal fluid and diffusion coefficients were calculated by considering the spherical geometry of the matrices.     

Cross-linked chitosan microspheres: preparation and evaluation as a matrix for the controlled release of pharmaceuticals.

Chitosan microspheres having good spherical geometry and a smooth surface were prepared by the glutaraldehyde cross-linking of an aqueous acetic acid dispersion of chitosan in paraffin oil using dioctyl sulphosuccinate as the stabilizing agent. Microspheres having different degrees of swelling were made by varying the cross-linking density. Microspheres were prepared by incorporating theophylline, aspirin or griseofulvin. Drug incorporation efficiencies exceeding 80% could be achieved for these drugs. In-vitro release studies of these drugs were carried out in simulated gastric and intestinal fluids at 37 degrees C. It was observed that the drug release rates were influenced by the cross-linking density, particle size and initial drug loading in the microspheres.     

Chitosan microspheres prepared by spray drying.

Non-crosslinked and crosslinked chitosan microspheres were prepared by a spray drying method. The microspheres so prepared had a good sphericity and a smooth but distorted surface morphology. They were positively charged. The particle size ranged from 2 to 10 micron. The size and seta potential of the particles were influenced by the crosslinking level. With decreasing amount of crosslinking agent (either glutaraldehyde or formaldehyde), both particle size and zeta potential were increased. Preparation conditions also had some influence on the particle size. DSC studies revealed that the H2 antagonist drug cimetidine, as well as famotidine was molecularly dispersed inside the microspheres, in the form of a solid solution. The release of model drugs (cimetidine, famotidine and nizatidine) from these microspheres was fast, and accompanied by a burst effect.     

Development of Biodegradable Starch Microspheres for Intranasal Delivery

Domperidone microspheres for intranasal administration were prepared by emulsification crosslinking technique. Starch a biodegradable polymer was used in preparation of microspheres using epichlorhydrine as cross-linking agent. The formulation variables were drug concentration and polymer concentration and batch of drug free microsphere was prepared for comparisons. All the formulations were evaluated for particle size, morphological characteristics, percentage drug encapsulation, equilibrium swelling degree, percentage mucoadhesion, bioadhesive strength, and in vitro diffusion study using nasal cell. Spherical microspheres were obtained in all batches with mean diameter in the range of above 22.8 to 102.63 μm. They showed good mucoadhesive property and swelling behaviour. The in vitro release was found in the range of 73.11% to 86.21%. Concentration of both polymer and drug affect in vitro release of drug.     

Preparation and characterization of novel semi-interpenetrating polymer network hydrogel microspheres of chitosan and hydroxypropyl cellulose for controlled release of chlorothiazide

Novel semi-interpenetrating polymer network (IPN) hydrogel microspheres of chitosan (CS) and hydroxypropyl cellulose (HPC) were prepared by emulsion-cross-linking method using glutaraldehyde (GA) as a cross-linker. Chlorothiazide (CT), a diuretic and anti-hypertensive drug with limited water solubility, was successfully encapsulated into IPN microspheres. Various formulations were prepared by varying the ratio of CS and HPC, percentage drug loading and amount of GA. Microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy to investigate the formation of IPN structure and to confirm the absence of chemical interactions between drug, polymer and cross-linking agent. Scanning electron microscopy (SEM) was performed to study the surface morphology of the microspheres. SEM showed that microspheres have smooth surfaces. Particle size, as measured by laser light scattering technique, gave an average size ranging from 199-359 mum. Differential scanning calorimetry (DSC) was performed to know the formation of IPN structure. X-ray diffraction (X-RD) studies were performed to understand the crystalline nature of the drug after encapsulation into IPN microspheres. Encapsulation of drug up to 76% was achieved as measured by UV spectroscopy. Both equilibrium and dynamic swelling experiments were performed in 0.1 N HCl. Diffusion coefficients (D) for water transport through the microspheres were estimated using an empirical equation. In vitro release studies indicated the dependence of release rate on the extent of cross-linking, drug loading and the amount of HPC used to produce the microspheres; slow release was extended up to 12 h. The release data were also fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release followed the non-Fickian trend.     

Preparation of gelatin microspheres containing lactic acid--effect of cross-linking on drug release

In this study, gelatin microspheres containing lactic acid were prepared by the polymerization technique using glutaraldehyde as the cross-linking agent. Dried microspheres were loaded by immersing them in an aqueous solution of lactic acid. In order to prepare microspheres with an appropriate drug release profile, the effect of time of cross-linking and the amount of cross-linking agent on the swelling properties of microspheres and their release profile were investigated. The microencapsulation efficiency, microspheres appearance, particle size, swelling ratio and drug release profile were also studied. Microspheres prepared with a larger amount of cross-linking agent, or after longer cross-linking time, showed a reduced swelling ratio in aqueous media. In vitro release pattern of lactic acid from gelatin microspheres showed a biphasic profile and the release rates were reduced upon increasing the amount of cross-liking agent and prolonging the cross-linking time.     

Sodium alginate microspheres of metformin HCl: formulation and in vitro evaluation

Metformin microspheres with sodium alginate alone and in combination with gellan were prepared using an emulsion-cross linking method. The prepared microspheres were evaluated for their physico-chemical characteristics like particle size, morphology using SEM, incorporation efficiency, equilibrium water content (swelling) and in vitro drug release. The effect of various formulation variables like polymer concentration (sodium alginate; and proportion of gellan in microspheres prepared by a combination of sodium alginate and gellan), drug loading, crosslinking agent concentration and cross-linking time on the in vitro dissolution of the prepared microspheres were evaluated. The results showed that both the particle size and the incorporation efficiency were proportional to the polymer concentration. In case of microspheres containing both sodium alginate and gellan, the mean diameter and the incorporation efficiency were higher than the corresponding microspheres containing only alginate, both increasing with an increase in proportion of gellan. The prepared microspheres were found to be discrete and spherical in shape and were successful in sustaining the drug release for 8 hours. Incorporation of gellan caused a significant decrease in drug release. The release followed a biphasic profile, in all cases, characterized by an initial phase of moderate drug release followed by a phase of higher release. Further, the kinetic treatment of the dissolution data revealed the prevalence of matrix diffusion kinetics.     

Preparation and characterization of Mitomycin-C loaded chitosan-coated alginate microspheres for chemoembolization

Mitomycin-C loaded and chitosan-coated alginate microspheres were prepared for use in chemoembolization studies. In this respect, first alginate microspheres were prepared by using a spraying method using an extrusion device with a small orifice and following suspension cross-linking in an oil phase. Chitosan-coating onto the alginate microspheres was achieved by polyionic complex formation between alginate and chitosan. CaCl(2) was used as a cross-linker for alginate microspheres. The obtained chitosan-coated alginate microspheres were spherical shaped and approximately 100-400 microm average size. The microspheres were evaluated based on their swellability and the swelling ratio was changed between 50-280%. CaCl(2) concentration, stirring rate, chitosan molecular weight, chitosan concentration and time for coating with chitosan were selected as the effective parameters on microsphere size and swelling ratio. Equilibrium swellings were achieved in approximately 30 min. On the other hand, chitosan molecular weight, chitosan concentration and time for coating with chitosan were found as the most effective parameters on both drug loading ratio and release studies. Maximum drug loading ratio of 65% was achieved with high molecular weight (HMW) chitosan, highest chitosan concentration (i.e. 1.0% v/v) and shortest time for coating with chitosan (i.e. 1 h) values.     

Development and characterization of mucoadhesive microspheres bearing salbutamol for nasal delivery

Mucoadhesive drug delivery systems are those that provide intimate contact of the drug with the mucosa for an extended period of time. In our present work, mucoadhesive chitosan microspheres were prepared by emulsion solvent method. Formulations were characterized for various physicochemical attributes, shape, surface morphology, size, and size distribution, drug payload, swelling ability, and mucoadhesion. The effect of drug, citric acid, and permeation enhancer concentration on the physicochemical properties was studied. Crosslinked chitosan microspheres showed very good mucoadhesion, which was decreased on increasing the drug concentration and citric acid concentration, and slightly improved upon incorporation of permeation enhancer. The in vitro drug release and in vitro drug permeability through mucous membrane were performed, and slow release/permeation was noted with chitosan citrate complexed microspheres compared with noncomplexed chitosan microspheres. The in vivo performance of mucoadhesive microspheres formulations showed prolonged and controlled release of salbutamol as compared with oral administration of conventional dosage form.