The Impact of TruNatomy and ProTaper Gold Instruments on the Preservation of the Periradicular Dentin and on the Enlargement of the Apical Canal of Mandibular Molars

IntroductionThis study aimed to evaluate the preservation of periradicular dentin and the enlargement of the apical canal of mandibular molars with TruNatomy (Dentsply Sirona, Ballaigues, Switzerland) and ProTaper Gold (Dentsply Sirona) instruments.MethodsTwenty mandibular molars were scanned in a micro–computed tomographic device, anatomically paired, and distributed into 2 groups (n = 10). In the ProTaper Gold group, mesial and distal canals were prepared up to F2 (25/.08v) and F3 (30/.09v) instruments, whereas in the TruNatomy group, mesial and distal canals were enlarged up to the prime (26/.04v) and medium (36/.03v) instruments, respectively. After a new scan, the surface area, volume, unprepared areas, transportation, percentage of dentin removal, and dentin thickness parameters were calculated. Data were compared between groups using the Mann-Whitney test, the Student t test, and the nonmetric multidimensional scaling test with alpha set at 5%.ResultsNo difference was found between groups regarding unprepared canal areas and the reduction of dentin thickness (P > .05). Transportation was lower than 0.1 mm in all groups, and statistical differences were observed only at the apical third of the mesiobuccal canal with lower values in the TruNatomy group. ProTaper Gold removed more dentin than TruNatomy at the coronal level of mesial roots (1.8% and 1.0%, respectively) (P < .05).ConclusionsTruNatomy and ProTaper Gold were efficient for performing canal preparation in mandibular molars. The tested systems were similar in terms of untouched canal walls and remaining dentin thickness and slightly different in the apical transportation of mesial canals and the percentage of dentin removal at the coronal third but without clinically significant errors.     

Comparison of the effect of different glide path files on amount of apically extruded debris in curved root canals

It is essential to create a glide path before root canal preparation with nickel–titanium rotary files to avoid file breakage and preserve the original canal structure. The aim of this study was to compare the amount of apically extruded debris after using different glide path files. A total of 96 first mandibular molars with curved mesial roots were randomly divided into six groups (n = 16) which are K-files, Proglider, R-Pilot, TruNatomy Glider, WaveOne Gold Glider and group without a glide path. Apically extruded debris was measured after glide path and canal preparation. The highest amount of debris was found in the control group without a glide path and using a glide path file caused less debris and significant differences were observed between R-Pilot, TruNatomy Glider, ProGlider, WaveOne Gold Glider and K-file groups. It may be recommended to create a glide path before root canal shaping to reduce the amount of extrusion debris from the apical. Especially in curved and narrow root canals, it is recommended to use an R-Pilot file before root canal shaping in order to reduce the amount of apically extruded debris.     

Effect of Access Cavity Preparation on Dentin Preservation,Biomechanical Property,and Instrumentation Efficacy: A Micro–Computed Tomographic Study

IntroductionThe purpose of this study was to evaluate the influence of a contracted endodontic cavity (CEC) on dentin preservation, biomechanical property, and instrumentation efficacy of first permanent molars in comparison with a traditional endodontic cavity (TEC).MethodsForty-eight extracted intact maxillary and mandibular first molars were selected and scanned by micro–computed tomographic (micro-CT) imaging. Each tooth type was anatomically matched and assigned to the CEC group or the TEC group (n = 12). After root canal instrumentation with the ProGlider (Dentsply Maillefer, Ballaigues, Switzerland) and WaveOne Gold (Dentsply Maillefer), the specimens were scanned by micro-CT again. Pre- and postpreparation micro-CT imaging was used to evaluate the dentin preservation and instrumentation efficacy. The results on volume and thickness reduction in the coronal dentin and pericervical dentin (PCD), root canal volume and surface area, percentage of unprepared surface area, canal transportation and centering ratio, and canal wall thickness in the “danger zone” were measured and analyzed with the Shapiro-Wilk and independent sample t tests. Based on micro-CT imaging of maxillary and mandibular first molars, CEC and TEC models were constructed on the intact tooth, and 2 different static loads were applied to the occlusal load points. The stress distribution patterns and von Mises stress on the occlusal surface and cervical region were assessed by 3-dimensional finite element analysis.ResultsThe CEC had a significantly lower volume and thickness reduction of coronal dentin and PCD above the alveolar crest compared with the TEC group (P < .05), whereas no difference was observed in PCD below the alveolar crest between the 2 groups (P > .05). There was no difference regarding all instrumentation efficacy outcomes (root canal volume and surface area, percentage of unprepared surface area, canal transportation and centering ratio, and canal wall thickness) in the danger zone between the 2 groups (P > .05). The CEC effectively reduced the maximum von Mises stress and stress concentration area on the occlusal surface and cervical region compared with the TEC.ConclusionsThe CEC preserved more coronal dentin and PCD above the alveolar crest and thus reduced stress concentration on the occlusal surface and cervical region. The CEC had no significant adverse effects on the instrumentation efficacy compared with the TEC given that the instrumentation procedures were performed with ProGlider and WaveOne Gold files.     

Microcomputed Assessment of Transportation,Centering Ratio,Canal Area,and Volume Increase after Single-file Rotary and Reciprocating Glide Path Instrumentation in Curved Root Canals: A Laboratory Study

IntroductionThe aim of this study was to compare the transportation and centering abilities of the ProGlider (PG; Dentsply-Sirona, Ballaigues, Switzerland), WaveOne Gold Glider (WOGG; Dentsply-Sirona), and R-Pilot (RP; VDW, Munich, Germany) file systems and the changes in the structure model index (SMI), surface area, and root canal volume (after creating the glide path in the mandibular first molar teeth’s mesial canals with moderate curvature) using the micro–computed tomographic (micro-CT) method.MethodsIn the present study, 24 mandibular first molar teeth with 2 separate mesial canals and moderate (10°–20°) curvature were used. After scanning with micro-CT imaging before the procedure, the teeth were divided into 3 groups, PG, WOGG, and RP (n = 10/each group), followed by the glide path procedure. After the root canal preparation, changes in the root canals regarding the volume, surface area, SMI, transportation made by the files, and the change of their centering ability in the apical, middle, and coronal third were analyzed by micro-CT imaging. The data were statistically evaluated using 1-way analysis of variance and the Kruskal-Wallis test with a significance level set at 5% (P < .05).ResultsThe WOGG and RP file systems showed better centering abilities at all thirds compared with the PG file system (P < .05). No significant difference was found in the apical third between the groups in terms of canal transportation degree (P > .05). However, in the WOGG and RP groups, less transportation was observed in the middle and coronal thirds compared with the PG group (P < .05). When the SMI changed, after the root canal preparation was compared, no significant differences were found between the groups (P > .05). Nevertheless, the changes in volume and surface area of the root canal in the WOGG and RP groups were significantly lower than in the PG group (P < .05).ConclusionsThe WOGG and RP file systems caused similar levels of change in the root canal systems based on all parameters. Moreover, it was determined that the PG file system caused a significantly higher volume and surface area increase than the WOGG and RP file systems.     

Effects of Different Glide Path Files on Apical Debris Extrusion in Curved Root Canals

Introduction

Creating a glide path before root canal preparation with nickel-titanium rotary files is essential to prevent the file fracture and to maintain the original root canal configuration. Both rotary glide path files and manual K-files are used to create a glide path. The aim of this study was to compare the amount of apically extruded debris after using different glide path files before preparing curved root canals with the WaveOne Gold single-file reciprocating system (Dentsply Maillefer, Ballaigues, Switzerland).

The Effect of Different Molar Access Cavity Designs on Root Canal Shaping Times Using Rotation and Reciprocation Instruments in Mandibular First Molars

IntroductionThe aim was to compare the glide path and final preparation times of WaveOne Gold and TruNatomy in conjunction with two different endodontic access cavity designs in extracted human molar teeth.Methods60 extracted human mandibular molars with mesiobuccal canals were selected and randomly divided into two different access cavity design preparation groups (n = 30). Traditional access cavities (TAC) and conservative access cavities (CAC). Within each cavity design group, the 30 teeth were divided in to two instrumentation groups (WaveOne Gold Primary (n = 15) and TruNatomy Prime (n = 15)). Group 1: TAC, #10 stainless steel manual K-file followed by WaveOne Gold Glider and WaveOne Gold Primary. Group 2: CAC, #10 stainless steel manual K-file followed by WaveOne Gold Glider and WaveOne Gold Primary. Group 3: TAC, #10 stainless steel manual K-file followed by TruNatomy Orifice Modifier and Glider and TruNatomy Prime. Group 4: CAC, #10 stainless steel manual K-file followed by TruNatomy Glider and TruNatomy Prime. Glide path and final preparation times were recorded.ResultsShaping time with TruNatomy Glider in combination with TruNatomy Prime instruments were faster compared to the WaveOne Gold Glider/ WaveOne Gold Primary instruments regardless of the type of access cavity preparation. TAC design yielded faster preparation time (38.2 ± 4.57 seconds) compared to the CAC (55.6 ± 6.91 seconds) in the WaveOne Gold Glider/ WaveOne Gold Primary instrumentation group. No difference was found between the different access cavity design groups in combination with TruNatomy Glider/TruNatomy Prime preparation.ConclusionPreparation time with TruNatomy Glider and Prime instruments was significantly faster than WaveOne Gold Glider/WaveOne Gold Primary, regardless of the access cavity design. TAC design in combination with WaveOne Gold Glider/ WaveOne Gold Primary instrumentation resulted in faster preparation time compared to WaveOne Gold Glider/WaveOne Gold in combination with the CAC design.     

Effects of Root Canal Curvature and Mechanical Properties of Nickel-Titanium Files on Torque Generation

IntroductionThis study aimed to compare the torque generated by 4 different files in root canals with 4 different curvature angles.MethodsFour brands of nickel-titanium (NiTi) endodontic files were selected: WaveOne Primary (Dentsply Sirona, Ballaigues, Switzerland), WaveOne Gold Primary (Dentsply Sirona), ProTaper Universal F2 (Dentsply Sirona), and ProTaper Next X2 (Dentsply Sirona). A tempered steel block containing artificial canals with 4 different canal curvatures (15°, 25°, 35°, and 45°) was constructed. Each file was used according to the manufacturer’s instructions in the dynamic model, with an added 15 axial up-and-down movements of 4 mm at the end of the canal. The generated torque was recorded, and the total and maximum torque values were measured. Two-way analysis of variance and the Duncan post hoc comparison test were performed at a significance level of 95%.ResultsA significant correlation between the curvature angle and the type of file system was observed (P < .05). As the degree of canal curvature increased, the generated total and maximum torque increased. At 15° and 25°, the NiTi files with reciprocating motion generated a higher total and maximum torque than files with continuous rotation. ProTaper Universal of conventional NiTi alloy showed the steepest increase in the generated total and maximum torque with the increasing curvature angle. The ProTaper Next file had the lowest torque values at the higher canal angles of 35° and 45° (P < .05).ConclusionsDespite the study limitations, it can be concluded that root canal curvature, design, and heat treatment of NiTi files and file kinematics affect the generated torque during instrumentation.     

Fracture Resistance of Heat-Treated Nickel-Titanium Rotary Files After Usage and Autoclave Sterilization: An In Vitro Study

IntroductionThis study aimed to evaluate the dynamic cyclic fatigue resistance of heat-treated nickel-titanium (NiTi) files after usage and autoclaving.MethodsTwo heat-treated NiTi file systems with tip sizes of #25 (ie, ProTaper Gold F2 [Dentsply Sirona, Charlotte, NC] and TruNatomy Prime [Dentsply Sirona]) were selected. Files of each system were divided into 3 experimental subgroups (n = 10). For subgroup 1, new files were tested to establish the baseline number of cycles to failure (NCF). For subgroup 2, files underwent canal instrumentation in a simulated J-shaped canal block with 35° of curvature and a 16.5-mm length. The simulated canals were pre-enlarged using stainless steel files #10K and #15K. After instrumentation, the files were tested. For subgroup 3, files underwent canal instrumentation as in subgroup 2 followed by autoclave sterilization and then were tested for cyclic failure. The cyclic fatigue test was performed in dynamic pecking motion under body temperature. The time to fracture was recorded and calculated into NCF. Fracture fragment lengths were measured using a digital microcaliper. Statistical analysis was conducted using the independent t test and multifactorial analysis of variance with 95% significance. Scanning electron microscopy was used to examine the topographic characteristics after cyclic fatigue tests.ResultsThere were no significant differences between file systems in subgroup 1 using new files (P < .05). Although PG reduced the NCF after use, TN showed a significantly increased NCF (P < .05). However, after sterilization, TN showed a reduced NCF compared with the used one (P < .05).ConclusionsCyclic loading by usage and heat treatment during sterilization may result in different cyclic fatigue resistance according to the geometry and alloy characteristics.     

Apically Extruded Debris in Curved Root Canals Using the WaveOne Gold Reciprocating and Twisted File Adaptive Systems

Introduction

The purpose of this study was to evaluate apical debris extrusion associated with different kinematics in curved root canals.

Root Canal Preparation of Mandibular Molars with 3 Nickel-Titanium Rotary Instruments: A Micro–Computed Tomographic Study

Introduction

The aim of this study was to describe the canal shaping properties of ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Universal (PTU; Dentsply Tulsa Dental Specialties, Johnson City, TN), and WaveOne (Dentsply Maillefer) nickel-titanium instruments in mandibular first molars by using micro–computed tomographic (micro-CT) scanning.

Methods

A total of 36 maxillary first molars with 2 separate mesial canals and 1 distal canal were selected and scanned preoperatively and postoperatively by using micro-CT scanning with a voxel size of 30 μm. Canals were prepared with PTU, PTN, and WaveOne systems under hypochlorite irrigation. The volume of the untreated canal; the volume of dentin removed after preparation; the amount of the uninstrumented area; and the transportation to the coronal, middle, and apical thirds of canals were measured. The preparation time and instrument failure were also recorded.

Results

Instrumentation of canals increased their volume and surface area. The distal canals had a significantly higher proportion of unprepared surfaces than mesial canals (P < .05). The PTN system produced less transportation than the WaveOne and PTU systems in the apical third of the mesial canals (P < .05). There was no significant difference on apical transportation in distal canals among the 3 instrument systems. Instrumentation with WaveOne was significantly faster than with the other 2 instruments (P < .05).

Conclusions

The PTN, PTU, and WaveOne instruments shaped root canals in mandibular first molars in vitro without significant shaping errors. The curved canals prepared using PTN had less apical transportation than the canals prepared using WaveOne and PTU.     

Micro–computed Tomographic Evaluation of the Shaping Ability of 3 Reciprocating Single-File Nickel-Titanium Systems on Single- and Double-Curved Root Canals

IntroductionWe performed a micro–computed tomographic assessment of the preparation of moderately single- and double-curved root canals using 3 single-file reciprocating nickel-titanium systems: S1 Plus Standard (Sendoline, Täby, Sweden), WaveOne Gold Primary (Dentsply Sirona, Ballaigues, Switzerland), and Reciproc R25 (VDW, Munich, Germany).MethodsSeventy-five moderately curved mandibular molars with 2 separate mesial root canals were assigned to 3 experimental groups (n = 25) (ie, S1 Plus Standard, WaveOne Gold Primary, and Reciproc 25 groups) by forming matched triples according to curvature (15°–40°), radius (≤18 mm), and type of curvature (single or double curved). Teeth were scanned before and after root canal preparation with a resolution of 10.5 μm using micro–computed tomographic imaging (Bruker SkyScan 1272; Bruker microCT, Kontich, Belgium). The following parameters were assessed: changes in root canal volume and surface area, percentage of unshaped canal walls, structure model index, canal transportation, and centering ratio. Data were analyzed using 2- and 3-way analysis of variance with Tukey and Scheffé post hoc tests (significance level of 5%).ResultsNo significant differences among groups were observed concerning all parameters. The type of curvature had no significant effect on all tested parameters. Within all experimental groups, canal transportation increased significantly from the apical to the coronal region, of which the majority was directed toward the furcational area.ConclusionsPreparation with the 3 nickel-titanium systems did not result in significantly different dimensional changes, and there was no significant effect of the type of curvature on all tested parameters.     

Cyclic Fatigue Resistance of Nickel-Titanium Reciprocating Instruments after Simulated Clinical Use

IntroductionThe aim of this study was to evaluate the cyclic fatigue resistance of different heat-treated nickel-titanium reciprocating instruments in 2 different situations: new and used instruments after preparing 3 curved canals.MethodsA total sample of 60 nickel-titanium instruments of 3 systems (n = 20 per system) were used in this study: ProDesign R (tip 25, 0.06 taper; Easy Dental Equipment, Belo Horizonte, Brazil), Reciproc Blue (tip 25, 0.08v taper; VDW, Munich, Germany), and WaveOne Gold (tip 25, 0.07v taper; Dentsply Sirona, Ballaigues, Switzerland). Thirty new instruments (n = 10 per system) were used to prepare 90 curved single-rooted mandibular premolars (n = 30). Each instrument was used to prepare 3 root canals, and after each canal preparation the instrument was ultrasonic cleaned and submitted to autoclave sterilization procedures. The other 30 instruments (n = 10 per system) were kept without use. Then, the new and used instruments were subjected to the cyclic fatigue test in an artificial canal with a 30° angle and a 5-mm radius of curvature. The time and number of cycles to fatigue were recorded. Data were analyzed using the unpaired t test for intragroup comparison. For intergroup comparison, analysis of variance and the Tukey test for multiple comparisons were used.ResultsThe intergroup comparison of new instruments showed that ProDesign R had the highest cyclic fatigue resistance followed by Reciproc Blue and WaveOne Gold (P < .05). Regarding the used instruments, WaveOne Gold had the lowest cyclic fatigue resistance (P < .05). The intragroup comparison between new and used instruments showed that WaveOne Gold and ProDesign R presented a significant reduction in the cyclic fatigue resistance after simulated clinical use (P < .05); no difference was found with the Reciproc Blue instruments (P > .05).ConclusionsProDesign R had the highest cyclic fatigue resistance, whereas WaveOne Gold had the lowest for new and used instruments. Simulated clinical use affected the cyclic fatigue resistance of ProDesign R and WaveOne Gold but not of Reciproc Blue instruments.     

Influence of the Number of Pecking Motions at Working Length on the Shaping Ability of Single-file Systems in Long Oval-shaped Curved Canals

IntroductionThe present study compared the effect of the number of pecking motions at the working length (WL) on the shaping ability of single-file systems in long oval-shaped curved root canals.MethodsSingle-rooted mandibular premolars with long oval-shaped curved canals (25°–35°) were prescanned using micro–computed tomographic imaging, anatomically paired, and randomly divided into 3 groups (n = 15): XP-endo Shaper (XPS; FKG Dentaire, La Chaux-de-Fonds, Switzerland), Reciproc Blue (RB; VDW, Munich, Germany), and WaveOne Gold (WOG; Dentsply Sirona, Ballaigues, Switzerland). After preparation to the WL, each specimen underwent 1, 2, 4, 10, or 20 pecking motions to the WL and was rescanned. Morphologic parameters were measured and analyzed using a 2-factor repeated measures analysis of variance and the Scheirer-Ray-Hare test.ResultsThe minor apical diameter and percentage increase in canal volume increased with the number of pecking motions, whereas the percentage of unprepared canal surface area decreased (P < .05). The mean minor diameters (in mm) at D0 varied between 0.29 and 0.35 after 4 pecking motions with the RB and WOG systems and between 0.35 and 0.36 after 10 pecking motions with the XPS system. No significant differences in canal transportation or centering ratio were observed among the groups at the levels of canal curvature and canal thirds (P > .05).ConclusionsIncreasing the number of pecking motions improves the cutting efficacy of single-file systems without adversely altering the anatomic characteristics of oval-shaped curved canals. No more than 4 pecking motions for the RB and WOG systems and 10 pecking motions for the XPS system appear to be acceptable for the shaping of these difficult to clean root canals.     

Comparison of Cyclic Fatigue Resistance of 5 Heat-treated Nickel-titanium Reciprocating Systems in Canals with Single and Double Curvatures

IntroductionThe goal of this study was to compare the cyclic fatigue resistance of 5 heat-treated nickel-titanium files in reciprocating movement with the same tip size and different cross sections.MethodsFive groups (WaveOne [Dentsply, Ballaigues, Switzerland], WaveOne GOLD [Dentsply], RECIPROC [VDW, Munich, Germany], RECIPROC BLUE [VDW GmbH, Munich, Germany], and TF [Sybron Endo, Glendora, CA] Adaptive) of 24 files each of the rotary files were examined. Cyclic fatigue resistance was compared between groups by determining the time needed to fracture and the number of cycles to failure in a cyclic fatigue testing device with 2 different curvatures, the first with a 5-mm radius of curvature and a 60° angle and the second with a double curvature, coronal curvature of 60° angle and a radius of 5 mm, and an apical curvature of 70° angle and a 2-mm radius. Scanning electron microscopic evaluation was performed at the fracture sites to investigate the types of fracture.ResultsRECIPROC BLUE group had a higher mean time to fracture followed by RECIPROC and WaveOne GOLD for both single and double curvature. WaveOne had a higher mean time to fracture in a single curvature canal than TF Adaptive, whereas the opposite was true for a double curvature canal. Both RECIPROC groups were significantly greater in cyclic fatigue resistance in comparison with all other groups (P < .05). WaveOne GOLD was significantly greater than the WaveOne and TF Adaptive groups (P < .05).ConclusionsRECIPROC BLUE files exhibited significantly greater cyclic fatigue resistance compared with other files tested in an S-shaped artificial canal.     

Micro–computed Tomographic Evaluation of the Shaping Ability of WaveOne Gold,TRUShape, EdgeCoil,and XP-3D Shaper Endodontic Files in Single,Oval-shaped Canals: An In Vitro Study

IntroductionThis study evaluated and compared the shaping ability of the WaveOne Gold (Dentsply/Tulsa Dental Specialties, Tulsa, OK), TRUShape 3D Conforming File (Dentsply/Tulsa Dental Specialties), EdgeCoil (EdgeEndo, Albuquerque, NM), and XP-3D Shaper (Brasseler USA, Savannah, GA) endodontic file systems on oval-shaped canals using micro–computed tomographic (micro-CT) technology.MethodsThirty-two oval-shaped, single-canal extracted human teeth were decoronated 1 mm coronal to the cementoenamel junction and scanned via a micro-CT scanner (μCT100; Scanco Medical, Bassersdorf, Switzerland). Teeth were divided into 4 groups (n = 8) and instrumented according to the manufacturer's instructions. Coregistered images, before and after root canal preparation, were evaluated for morphometric measurements of the surface area, volume, structure model index (SMI), conicity, and percent of walls untouched using the manufacturer's evaluation software (IPL Register, Scanco Medical). Data were statistically compared between groups using 1-way analysis of variance and within groups using a paired sample t test.ResultsInstrumentation with all file types increased the surface area, volume, and conicity between and within groups. There was no statistically significant difference between the groups for any of the rotary instruments used (P < .05).ConclusionsInstrumentation of oval-shaped canals with WaveOne Gold, TRUShape, EdgeCoil, and XP-3D Shaper rotary endodontic instruments similarly increase the volume, surface area, and conicity. None of the file systems were capable of contacting all of the surface area in any canal.     

Micro–computed Tomographic Assessment and Comparative Study of the Shaping Ability of 6 Nickel-Titanium Files: An In Vitro Study

IntroductionThis research studies and compares the shaping ability of WaveOne Gold (WG; Dentsply Tulsa Dental Specialties, Tulsa, OK), the Reciproc Blue (RB; VDW, Munich, Germany), TRUShape (TS, Dentsply Tulsa Dental Specialties), XP-endo Shaper (XP; FKG, La Chaux-de-Fonds, Switzerland), iRace (IR, FKG), and TruNatomy (TN; Dentsply Sirona, Ballaigues, Switzerland) in the preparation of moderately curved canals and using micro–computed tomographic technology.MethodsSixty lower molars with 2 mesial canals were randomly distributed into 6 groups of 10 molars and 20 canals per group (n = 20). Specimens were scanned before and after preparation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WG, group 2 with RB, group 3 with TS, group 4 with XP, group 5 with IR, and group 6 with TN. After instrumentation, researchers quantified the changes produced in the canal geometry in terms of surface, volume, structure thickness, surface convexity index, structure model index, percentage of surface touched, and centroids. Wilcoxon and analysis of variance tests were performed to compare the values before and after preparation and the differences between groups. The significance level was established at 5%.ResultsThere were no significant differences between WG and RB (P > .05) and between TN and XP (P > .05). TN had significant differences with WG, RB, TS, and IR (P < .05). All the files produced similar apical transportation (P > .05).ConclusionsWG and RB and TN and XP had similar shaping effectivity. TS and WG touched the highest percentages of canal surfaces (81% and 73%, respectively) but produced the biggest changes in the canal anatomy. TN and XP better kept the canal anatomy, but TN touched the lowest percentage of canal surface (50%). All the files used were able to clean and to shape moderately curved canals with minimal apical transportation.     

Shaping Ability of WaveOne Primary Reciprocating Files and ProTaper System Used in Continuous and Reciprocating Motion

Introduction

The purpose of this study was to compare the shaping effects of Wave One (Dentsply Maillefer, Ballaigues, Switzerland) and full-sequence ProTaper nickel-titanium (NiTi) files (Dentsply Maillefer) used in reciprocating and conventional movements in a simulated canal.

Methods

Seventy-five S-shaped canals in resin blocks were randomly allocated to 3 groups (n = 25): WaveOne (group 1), full sequence of ProTaper Universal files in conventional movements (group 2), and full sequence of ProTaper Universal files in reciprocating movements (group 3). Preoperative and postoperative photographs of the simulated canals were taken under standardized conditions, after which they were accurately superimposed. Two methods were adopted to evaluate the shaping ability of the 3 approaches: measuring the differences in apical and coronal curvature modifications and measuring the amount of resin removed for both curvatures on the right and left sides of the simulated canals. Differences in canal curvature modifications and in the amount of resin removed were analyzed using 1-way analysis of variance (P < .0001) followed by a Tukey-Kramer multiple comparison post hoc test and mixed-effects linear model (P < .05), respectively.

Methods

Group 3 maintained better coronal and apical canal curvature and less straightening of the simulated canals with respect to groups 1 and 2.

Conclusions

When preparing S-shaped canals, full-sequence ProTaper Universal NiTi files used in a reciprocating motion exhibited better shaping effects than full-sequence ProTaper Universal NiTi files used in a conventional motion and WaveOne.     

Effects of Self-Adjusting File,Mtwo, and ProTaper on the Root Canal Wall

IntroductionThe purpose of this ex vivo study was to observe the incidence of cracks in root dentin after root canal preparation with hand files, self-adjusting file (SAF), ProTaper, and Mtwo.MethodsOne hundred extracted mandibular premolars with single canals were randomly selected. Two angulated radiographs were taken for each tooth, and the width of the canal was measured at 9 mm from the apex. Five groups of 20 teeth each were comparable in canal width. The control group was left unprepared. Four experimental groups were instrumented with hand files, ProTaper, Mtwo, and SAF. Roots were then sectioned horizontally and observed under a microscope. The presence of dentinal cracks and their location were noted. The difference between the experimental groups was analyzed with a χ² test.ResultsNo cracks were observed in the control group. In the experimental groups, ProTaper, Mtwo, and SAF caused cracks in 35%, 25%, and 10% of teeth, respectively. The hand-file group did not show any dentinal cracks (P < .0001). ProTaper and Mtwo caused more cracks than hand files (P < .05), but SAF did not (P > .05).ConclusionsInstrumentation of root canals with SAF, Mtwo, and ProTaper could cause damage to root canal dentin. SAF has a tendency to cause less dentinal cracks as compared with ProTaper or Mtwo.     

Micro-Computed Tomographic Evaluation of Canal Transportation and Centering Ability of 4 Heat-Treated Nickel-Titanium Systems

IntroductionThis study aimed to evaluate and compare canal transportation and centering ability of 4 different root canal preparation systems produced with thermal treatments by means of micro–computed tomographic imaging.MethodsEighty mesial canals of human extracted mandibular molars were selected based on similar morphologic parameters and were randomly assigned to 4 experimental groups (n = 20) according to the canal instrumentation technique: HyFlex CM (HCM [Coltène-Whaledent, Allstätten, Switzerland]), HyFlex EDM (HEDM [Coltène-Whaledent]), WaveOne Gold (WOG [Dentsply Sirona, Ballaigues, Switzerland]), and OneCurve (OC [Micro-Mega, Besancon, France]). The specimens were scanned before and after root canal preparation using X-ray micro-computed tomographic imaging at a resolution of 19.9 μm. Apical transportation and centering ability were then analyzed at 3 different levels: 3 mm, 5 mm, and 7 mm from the apex, representing the apical, midroot, and coronal thirds of the root, respectively. One-way analysis of variance and Kruskal-Wallis tests were used to statistically compare the groups. The significance level was set at 5%.ResultsHCM caused less canal transportation than WOG at the 3-mm level in both the buccal and lingual canals (P < .05). Also, HCM resulted in less canal transportation than WOG and OC at the 7-mm level regarding lingual canals. No statistically significant differences were recorded between the groups when the mean centering ratios were compared.ConclusionsThe 4 evaluated systems safely prepared root canals causing minimal canal transportation and producing relatively centered preparations. In terms of canal transportation, HCM performed better than WOG at the apical level and better than WOG and OC at the coronal level.     

新型往复运动单支锉根管预备对牙本质微裂的影响

目的 ：比较新一代往复运动单支锉WaveOne Gold和Reciproc Blue与上一代WaveOne和Reciproc在根管预备后产生牙本质微裂的差异。方法：将90颗离体下颌单根前磨牙随机分为6组（n=15）,分别为手用K锉组、WaveOne组、Reciproc组、WaveOne Gold组、Reciproc Blue组和空白对照组。将实验组根管预备至25#,空白对照组不作预备。利用硬组织切片机在距根尖孔3、6和9 mm处水平切割牙根,体视显微镜下放大25倍,观察不同横截面牙本质微裂情况。采用SPSS 17.0软件包对数据进行统计学分析。结果：手用K锉组和空白对照组未发现牙本质微裂;实验组中,WaveOne、WaveOne Gold、Reciproc和Reciproc Blue在根管预备后均产生了牙本质微裂,其中,WaveOne和手用K锉组产生的牙本质微裂纹数目差异有统计学意义（P<0.05）,裂纹主要集中于根管根中段;Reciproc和Reciproc Blue 2种往复运动单支锉造成的牙本质微裂数目相同,与对照组相比无统计学差异。结论：使用新一代往复运动单支锉WaveO...