Bite force and dentofacial morphology in men with severe dental attrition

Patients with severely worn dentition were interviewed and clinically examined, and only those were included who had no or minimal subjective symptoms or clinical signs of craniomandibular disorder. During a 14-month screening period, only 7 patients fulfilled the inclusion criteria; all were men. Maximal bite force was measured in the molar regions and in the incisal region. Facial morphology was evaluated from lateral cephalometric radiographs, and the form of dental arches from dental casts. Average maximal bite force in the molar region was 911 N and in the incisal region 569 N. The most characteristic findings concerning bite force were the high force levels in the incisal region and an incisal/molar bite-force ratio of 63%. The facial morphology of the patients was rectangular, with an anteriorly rotated mandible, small anterior face height, and great interincisal angle. Moreover, the form of the maxillary dental arch was more rectangular than normal. The high bite forces of these patients, especially in the incisal area, can probably be explained by strong masticatory muscles and mechanically favorable skull morphology, which in its turn has been influenced by the surrounding muscles.     

Influence of clenching intensity on bite force balance, occlusal contact area, and average bite pressure.

It has been difficult for investigators to simultaneously and reliably evaluate bite force in the intercuspal position with the area and location of occlusal contacts. This study was designed to investigate the variations in these parameters with respect to two factors: three levels of clenching and the preferred chewing side. Human subjects with normal occlusion were examined with a recently developed system (Dental Prescale Occluzer, Fuji Film, Tokyo, Japan). The three levels of clenching intensity were assessed by masseteric EMG activity and included the maximum voluntary contraction, and 30% and 60% of the maximum. The results indicated that the bite force and occlusal contact area on the whole dental arch increased with clenching intensity. In contrast, the average bite pressure, obtained by dividing the bite force by the contact area, remained unchanged regardless of the clenching intensity. As the clenching intensity increased, the medio-lateral position of the bite force balancing point shifted significantly (P<0.01) from the preferred chewing side toward the midline. The antero-posterior position remained stable in a range between the distal third of the first molar and the mesial third of the second molar. The bite force and occlusal contact area, which were mainly on the molars, increased with the clenching intensity, whereas the proportions of these two variables on each upper tooth usually did not change significantly. The exception was the second molar on the non-preferred chewing side. When comparisons were made between pairs of specific upper teeth of same name, usually no significant difference was found in bite force or occlusal contact area, regardless of the clenching level. Again, the exception to this observation was the second molar on the preferred chewing side, which had a larger area at the 30% clenching level. The results in normal subjects suggest that as the clenching intensity increases in the intercuspal position, the bite force adjusts to a position where it is well-balanced. This adjustment may prevent damage and overload to the teeth and temporomandibular joints.     

An investigation into the effect of denture adhesives on incisal bite force of complete denture wearers using pressure transducers - a clinical study

PURPOSE

Study was conducted to determine and assess the effect of different type of denture adhesives on the incisal bite force of complete denture wearers until the dislodgement of upper denture, using pressure transducer.

MATERIALS AND METHODS

30 patients out of 100 were included in the study. Based on the Kapur''s method of scoring denture retention and stability, these patients were divided into 3 groups- Group A - Clinically good dentures; Group B - Clinically fair dentures; and Group C - Clinically poor dentures. A custom made occlusal force meter was constructed based on the load cell type of pressure transducers. Different adhesives (powder, paste and adhesive strips) were used in the study. Complete denture wearers were asked to bite on the load cell and the readings of incisal bite force were recorded. The readings of incisal bite force were subjected to statistical analysis using Repeated measures ANOVA followed by post-hoc bonferroni test.

RESULTS

The result suggests that denture adhesives improved the incisal bite force of complete denture wearers significantly The incisal bite force (in kg) in Group A without using adhesives, with powder adhesive, with paste adhesive and with adhesive strips was found to be 2.48 (± 0.16), 3.43 (± 0.11), 6.01 (± 0.11), 3.22 (± 0.09) respectively. The incisal bite force (in kg) in Group B without using adhesives, with powder adhesive, with paste adhesive and with adhesive strips was found to be 1.87 (± 0.18), 3.35 (± 0.14), 5.34 (± 0.18), 3.21 (± 0.12) respectively. The incisal bite force (in kg) in Group C without using adhesives, with powder adhesive, with paste adhesive and with adhesive strips was found to be 1.00 (± 0.17), 3.07 (± 0.14), 4.37 (± 0.26), 2.99 (± 0.14) respectively.

CONCLUSION

Within the limitations of the study, it was concluded that the use of denture adhesive was found to be significantly effective in improving the incisal bite force of complete dentures until the dislodgement of upper denture. Fittydent paste adhesive was found to be more effective than the powder and strips adhesives. The improvement in incisal bite force was found to be higher in Group C in comparison to that of Group A and Group B.     

Maximal contraction force and endurance of human jaw-closing muscles in isometric clenching

Maximal unilateral bite force and endurance times from maximal bite force to the 75% and 50% levels of maximal values were recorded for 13 men and 15 women with bite openings of 10 and 14 mm. Measurements were made both from right and left molar regions and from the incisal region. Bite force values were significantly higher than previously measured in endurance tests by devices with unilateral housings. Men achieved greater bite force than women in the molar region in every trial. The general assumption that women's muscles are superior to those of men in static endurance when both are working at the same percentage of maximal voluntary contraction was not supported by this work for jaw-closing muscles. The endurance times to 75% and 50% levels of maximal bite force were shorter than could be expected from previous reports, and endurance times to the 50% level were even shorter than those reported for muscles of limbs.     

Ideal endodontic access in mandibular incisors.

Straight-line access in mandibular incisors facilitates locating and debridement of the canals. The purpose of this study was to plot where ideal access should be located in mandibular incisors to obtain straight-line access to the apical third of the root canal and to determine if a correlation exists between incisal edge wear and position of access opening. Two hundred and seventy-nine mandibular incisors were radiographed in clinical and proximal views. Straight-line access was determined by finding midpoints in the canal at two levels and extending a line connecting the points through the crown. Teeth were graded as to the condition of the incisal edge. Ideal straight-line access was determined to be at the incisal edge in 72.4% of the teeth, whereas in 27.6% of the teeth it was to the facial of the incisal edge. As the wear of the incisal edge increased, the ideal access moved from the facial toward the incisal.     

Denture wearing and strong bite force reduce pressure pain threshold of edentulous oral mucosa

Pain in denture supporting tissue is one of the most common and critical problems affecting function and treatment outcomes in complete denture prosthetics. The objective of this study was to investigate the effects of denture wearing and bite force on the pressure pain threshold (PPT) of edentulous oral mucosa. PPT was measured in denture and non-denture-wearing patients by using an electronic-controlled pressure algometer. Bite force was measured in denture-wearing patients by using a pressure-detecting sheet. The mid palate showed 200-300% higher PPT than the buccal alveolar mucosa (two-way anova, P < 0.0001). Denture-wearing patients exhibited 40% lower palatal PPT than non-denture-wearing patients. In denture-wearing patients, PPT in the selected areas of the oral mucosa was negatively correlated with bite force. Denture wearing may reduce PPT in selected areas of the edentulous oral mucosa, and the PPT reduction may be associated with mechanical stress on the mucosa generated by bite force.     

Incisal and condylar paths during habitual mouth opening movement of children with anterior reverse bite in the primary dentition

The purpose of this study was to evaluate whether the path of habitual mouth opening was influenced by anterior reverse bite malocclusion in children. Two groups of children with the primary dentition were chosen: (i) 10 children with anterior reverse bite (reverse bite group) and (ii) 10 with normal occlusion (normal occlusion group). Their habitual mouth opening movements were measured by an opto-electronic movement-analysing system with 6 d.f. at a sampling rate of 100 Hz. These movements were projected on the sagittal plane at the incisal and condylar points. To characterize the path, we used the angles between the path and the horizontal plane. In the initial stage of opening, the incisal path of the reverse bite group was displaced more posteriorly from the intercuspal position than that of the normal occlusion group. However, as opening continued, the direction of the path of the reverse bite group was more anterior than those of the normal occlusion group. During the entire opening movement, the condylar path of the reverse bite group was flatter than those of the normal occlusion group. In conclusion, it was demonstrated that anterior reverse bite in the primary dentition clearly affects the paths of habitual opening movements.     

Biomechanics of the Dental Arch and Incisal Crowding

During horizontal contact, the dental arch represents a link chain in which two convex articular surfaces are in contact and are tensioned by the dentogingival and dentoalveolar fibrous tissue. Joints composed of convex-convex surfaces are equivalent to stretched dimeric link chains whose links are in a mechanically unstable position under compression. Experiments on plaster models show that the dimensional stability of an articulated (dental) arch is considerably increased when a concave and a convex articular surface are in contact, as these joints are equivalent to an overlapping dimeric link chain whose links are in a mechanically stable position when under compression. In the abraded denture of Stone Age man, horizontal interdental contacts of transversally concave-convex dental surfaces may be found extending even into the incisal region. Increased stability of the dental arch and reduced problems of incisal crowding are to be expected if an overlapping dimeric chain is produced morphologically in each horizontal contact by means of slight interproximal enamel reduction.     

Fluoride distribution in human dental calculus obtained from different sites on the tooth surface

We examined the site specificity of fluoride (F) distribution in human dental calculus. Teeth with supra- and subgingival calculus were obtained from patients who resided in non-fluoridated areas in Japan and China. Sequential layers of the dental calculus (30 μm thick) were abraded by an abrasive micro-sampling technique and fluoride and phosphorus in the powdered samples were analyzed. Fluoride concentrations were highest in the outer, lowest in the middle and intermediate in the inner layers of dental calculus in general. In the outermost layers fluoride concentrations were highest in calculus found near the tooth cervix both in supra- and subgingival calculus. Fluoride concentrations decreased markedly toward the apical region in subgingival calculus. while it did not change toward the incisal or occlusal region in supragingival calculus. In the inner layers, fluoride concentrations in both supra- and subgingival calculus were not affected by position on the teeth. Fluoride concentrations in subgingival calculus near the apex were lower than in supragingival calculus near the incisal or occlusal region. It was concluded that the fluoride concentrations differ in different regions of dental calculus, probably due to their different mechanisms of formation.     

Effect of biting speed and jaw separation on force used to incise food

Biting food too quickly might affect the control of jaw-closing muscles and the estimation of bite force. The objectives of this study were to compare the incisal bite forces used to cut food and the activity of masseter (MA) and anterior temporalis (AT) muscles between slow, habitual and fast biting speeds and also between small and large jaw openings. Twenty subjects were asked to use their incisors to cut through a 5 mm thick of chewing gum. In the first experiment, subjects bit at 10-mm incisal separation with slow, habitual and fast biting speeds, and in the second experiment, subjects bit with their habitual speed at 10- and 30-mm incisal separations. The activities in the MA and AT muscles were assessed with surface electromyography, and the bite force was recorded by a force sensor placed beneath the chewing gum. Peak bite forces and associated MA amplitudes were increased significantly as biting speed was increased (P's < .05). Anterior temporalis amplitude was significantly increased during fast biting compared to slow and habitual biting (P's < .001). At 30-mm incisal separation, both peak bite force and AT amplitude were significantly increased, whereas MA amplitude was significantly decreased, compared to those at 10-mm separation (P's < .05). Biting off food quickly with incisor teeth results in larger activities in both MA and AT muscles. In addition, biting a large piece of food resulted in increased activity of AT muscle. Both conditions could be injury stimulator for jaw muscles.     

The influence of medial implant location in three-unit posterior cantilever fixed partial dentures on stress distribution in surrounding mandibular bone

This study examined the influence of medial implant location in three-unit posterior cantilever fixed partial dentures (FPDs) on stress distribution in mandibular bone surrounding two implants. A three-dimensional finite element model that included three-unit FPD and two cylindrical-type implants (4 mm in diameter and 10 mm in length) osseointegrated in the posterior mandible, was digitized. Five different models were created according to the medial implant location between the missing second premolar and the first molar location. The distal implant was fixed at the missing second molar location. Oblique bite force of 100 N at 30 degrees buccal to the vertical direction was directed on each of three artificial teeth, respectively and simultaneously, while the lower surface of the mandible was fixed. The maximum equivalent stress in the cortical and the trabecular bone generally increased as the medial implant shifted to a distal position. Under the simultaneous bite force, relatively low maximum stresses within the cortical bone: between 55 MPa and 57 MPa, were shown in the models with the medial implant placed within the range of one implant diameter from the most medial position, while higher maximum stresses: between 64 MPa and 73 MPa, were demonstrated with more distally placed medial implants. The results suggest that reasonably low mechanical stress in the surrounding bone may be assured when the medial implant is placed in the range between the missing second premolar position and one implant diameter distal from that location.     

Mandible function in taking construction bite for activator

Functional effects of construction bite for activator (Andresen type) especially on lateral pterygoid muscle, as well as the positional changes of the mandible, hyoid bone and surface EMGs from bilateral anterior temporal (TA) and masseter (MM) muscle, were studied on the electric force scale, MKG, EMG and cephalometric radiographs in 14 subjects with anterior cross bite in mixed dentition. The cephalometric radiographs were taken at the start of each patient's treatment. One was taken with the mandible in the intercuspal position and one was also taken with the activator in the mouth at the overjet improvement. The activator patients were divided into two groups because of differences in the direction of movement of the hyoid bone in the FH plane. In group O (7 patients), the movement of the hyoid bone was at an oblique angle to the FH plane, while in group D (7 patients) the movement ot the hyoid bone with nearly direct below angle to FH plane. The patients were further divided into three types because of differences in the distance between the hyoid bone and mental spine, and combined with the groups OA (3 patients), OB (2 patients), OC (2 patients), DA (5 patients), DB (2 patients) and DC (Naught). The results obtained were as follows: The forces for the construction bite for groups O and D were 2.71 Kg and 2.72 kg, respectively. Type OC required significantly heavier force. (p less than 0.05) In the condylar test, O group was significantly smaller at the start of treatment, but not after overjet improvement. Type OA and OB were also significantly smaller at the start of treatment. (p less than 0.05) Velocity of opening for group D was significantly (p less than 0.05) faster at the start of treatment, but not after that. There was no significant difference in EMGs between the groups, with activator in the mouse D group much increased as it EMGs. The EMGs M/T ratio for both groups was approximately 100% at the start of treatment for overjet improvement. In cases with no or slight lateral shift in the recorded path of closure or in the incisal region, no large differences were recorded laterally. Large EMGs differences were recorded with lateral shift in the incisal region, especially when taking the construction bite.     

Bite force on single as opposed to all maxillary front teeth

The relation of number of teeth to maximal clenching force was tested in 10 healthy female dental students. The maximal force in the interincisal position was tested by spreading the load with individual acrylic splints over a varying number of teeth in the anterior region. In the maxilla, one splint covered teeth 13–23; another covered tooth 11. In the mandible, one splint covered teeth 33–43 in all experiments. The maximal force in the incisal position was measured 10 times, five times with each splint. The maxillary splints were changed in random order. The tactile sensibility of tooth 11 and its antagonists was tested before and immediately after interincisal force measurements. A highly significant difference between maximal forces was seen in comparing biting between a single tooth and multiple teeth. In addition, bite force also showed a significant increase in both single tooth and multiple teeth successive biting trials during the experiments. Tactile sensibility between d 11 and its antagonist was not altered by the maximal bite force trials.     

Maximal Bite Force and Its Association with Signs and Symptoms of TMD,Occlusion, and Body Mass Index in a Cohort of Young Adults

The purpose of this population-based cohort was to measure maximal bite force (MBF) in the molar and incisal regions and to examine whether MBF was associated with TMD, gender, occlusion (in terms of overjet, overbite, and total number of occluding contacts), and body mass index (BMI). MBF in the molar and incisal regions was measured using a calibrated method in 384 (196 males, 188 females) and 357 (181 males, 176 females) subjects, respectively. Two attempts in each region (right molar, left molar, and incisal) were made in random order. The subjects completed a multiple-choice questionnaire including subjective symptoms of TMD and were subsequently clinically examined. Helkimo's clinical dysfunction index and BMI were calculated. The mean MBF value in the molar region was significantly higher in males (878 N, SD 194) than in females (690 N, SD 175) (p<0.001). The incisal forces were 283 N (SD 95) and 226 N (SD 86) (p<0.001), respectively. According to multiple linear regression, TMJ discomfort was significantly negatively associated with MBF in the molar region (p<0.05) and overjet was significantly negatively associated with maximal incisal bite force (p<0.05). No significant associations between MBFs and body mass were found. The results demonstrate that in a population-based cohort of young adults signs, and symptoms of TMD and studied occlusal factors, unlike body mass, associate independently with MBF.     

Maximal bite force and its association with signs and symptoms of TMD, occlusion, and body mass index in a cohort of young adults

The purpose of this population-based cohort was to measure maximal bite force (MBF) in the molar and incisal regions and to examine whether MBF was associated with TMD, gender, occlusion (in terms of overjet, overbite, and total number of occluding contacts), and body mass index (BMI). MBF in the molar and incisal regions was measured using a calibrated method in 384 (196 males, 188 females) and 357 (181 males, 176 females) subjects, respectively. Two attempts in each region (right molar, left molar, and incisal) were made in random order. The subjects completed a multiple-choice questionnaire including subjective symptoms of TMD and were subsequently clinically examined. Helkimo's clinical dysfunction index and BMI were calculated. The mean MBF value in the molar region was significantly higher in males (878 N, SD 194) than in females (690 N, SD 175) (p < 0.001). The incisal forces were 283 N (SD 95) and 226 N (SD 86) (p < 0.001), respectively. According to multiple linear regression, TMJ discomfort was significantly negatively associated with MBF in the molar region (p < 0.05) and overjet was significantly negatively associated with maximal incisal bite force (p < 0.05). No significant associations between MBFs and body mass were found. The results demonstrate that in a population-based cohort of young adults signs, and symptoms of TMD and studied occlusal factors, unlike body mass, associate independently with MBF.     

An esthetic approach to vertical root extrusion in a patient with an anterior open bite: report of case

A previous attempt to locate the root canal system in the maxillary left central incisor with a bur created a perforating root defect at the level of the alveolar crest. The patient received root canal therapy. Next, vertical root extrusion was chosen to expose sound tooth structure apical to the defect so that a crown could be constructed. With an anterior open bite, the natural crown was left intact and it was possible to position the anchor bar in an incisal and lingual position, maintaining esthetics for the patient during both the extrusive and stabilization phases of treatment.     

正常(牙合)牙尖交错位咬合平衡的定量研究

目的　对正常（牙合）牙尖交错位（ICP）最大（牙合）力咬合进行定量研究，初步探讨ICP咬合平衡的生理范围。方法　应用T－Scan　Ⅱ系统记录123名正常骀者ICP最大（牙合）力的咬合情况，测量并计算力的中心点（COF）、（牙合）力百分比值、胎接触点数目。结果　正常胎者ICP最大（牙合）力时力的中心点相对位置、（牙合）力百分比差值以及不对称系数均服从正态分布，95％参考值范围分别为：－6．60～6．68mm，－15．50％～12．10％，0．65～1．39；98．4％的正常（牙合）者ICP最大（牙合）力咬合时力的中心点分布于后牙区。结论　正常（牙合）者最大（牙合）力时ICP咬合是稳定、平衡的咬合。     

Influence of maximum bite force on jaw movement during gummy jelly mastication

It is known that maximum bite force has various influences on chewing function; however, there have not been studies in which the relationships between maximum bite force and masticatory jaw movement have been clarified. The aim of this study was to investigate the effect of maximum bite force on masticatory jaw movement in subjects with normal occlusion. Thirty young adults (22 men and 8 women; mean age, 22·6 years) with good occlusion were divided into two groups based on whether they had a relatively high or low maximum bite force according to the median. The maximum bite force was determined according to the Dental Prescale System using pressure‐sensitive sheets. Jaw movement during mastication of hard gummy jelly (each 5·5 g) on the preferred chewing side was recorded using a six degrees of freedom jaw movement recording system. The motion of the lower incisal point of the mandible was computed, and the mean values of 10 cycles (cycles 2–11) were calculated. A masticatory performance test was conducted using gummy jelly. Subjects with a lower maximum bite force showed increased maximum lateral amplitude, closing distance, width and closing angle; wider masticatory jaw movement; and significantly lower masticatory performance. However, no differences in the maximum vertical or maximum anteroposterior amplitudes were observed between the groups. Although other factors, such as individual morphology, may influence masticatory jaw movement, our results suggest that subjects with a lower maximum bite force show increased lateral jaw motion during mastication.     

An electromyographic investigation of the first six months of progressive mandibular advancement of the Herbst appliance in adolescents.

The effects of the progressive activation of the Herbst appliance on the activity of the masseter and temporalis elevator muscles of the mandible were monitored in a group of 14 consecutively treated 10-15-year-old subjects with an Angle Class II, division I malocclusion. A cast silver splint Herbst appliance was activated in multiple stages at a rate of 2 mm/2 mo. The functionality of the superficial masseter and anterior portion of the temporalis muscles was monitored at maximum bite force using surface electromyography (EMG). The EMG recordings were taken at an incisal edge-to-edge position and a retruded mandibular position, both at a vertical interincisal separation of 3 mm using an acrylic bite plate. Measurements of maximum voluntary isometric clenches were taken during adaptive functional changes at pretreatment (baseline) and during the first 6 months of Herbst appliance therapy. Results showed great individual and inter- and intrasessional differences in electromyographic activity of the muscles before and during treatment. At the retruded position, the masseteric activity increased by the sixth month while temporalis activity remained at the same level. Following treatment, the masseteric imbalance was reduced, but the temporalis imbalance was unchanged. At the edge-to-edge position, masseteric activity increased by the sixth month, while temporalis activity remained unchanged. The masseteric imbalance was reduced by the sixth month, while the temporalis imbalance was reduced from the fourth month into treatment. The results imply a favorable muscular response to a progressive regime of Herbst appliance activation.     

Functional impression and bite registration: a single session procedure for the construction of complete dentures

The closed-mouth technique for the construction of complete dentures provides in the first session both impressions and a rough idea of the jaw relation in habitual intercuspation. The aim of this study was to apply this methodological advantage to the open-mouth technique and to assess whether the arbitrary moulding of tooth position-analogue plastic rims on functional impression trays facilitates a subsequent preliminary bite registration. Therefore, 104 complete dentures, manufactured by students during their final exams, were surveyed at 22 different test points using the Gutowski–Meyding gauge. Furthermore, the position of the front teeth, the lip support and the vertical dimension were assessed clinically. The results were as follows Upper complete denture vertical distance: middle of ridge – incisal edge of central incisor: 13 ± 3 mm (5–21) vertical distance: middle of ridge – tip of cusp of first molar: 9 ± 2 mm (2–16) sagittal distance: middle of ridge – incisal edge of central incisor 7 ± 2 mm (3–14) Lower complete denture vertical distance: middle of ridge – incisal edge of central incisor: 12 ± 3 mm (7–19) vertical distance: middle of ridge – tip of cusp of first molar: 13 ± 3 mm (5–20) sagittal distance: middle of ridge – incisal edge of central incisor: 3 ± 2 mm (0–6) Complete dentures in maximum intercuspation vertical distance upper to lower ridge region central incisor 20 ± 4 mm (12–33) vertical distance upper to lower ridge region first molar 21 ± 4 mm (9–34) Because of the interindividual variance the arbitrary moulding of the tooth position-analogue plastic rims seems not ideal. However, a functional and aesthetically pleasing existing denture should be surveyed to pre-shape functional impression trays. Such individualized trays proved clinically a valuable tool for functional impressions and an immediate preliminary bite registration.