A Robust and Wearable Triboelectric Tactile Patch as Intelligent Human-Machine Interface

The human–machine interface plays an important role in the diversified interactions between humans and machines, especially by swaping information exchange between human and machine operations. Considering the high wearable compatibility and self-powered capability, triboelectric-based interfaces have attracted increasing attention. Herein, this work developed a minimalist and stable interacting patch with the function of sensing and robot controlling based on triboelectric nanogenerator. This robust and wearable patch is composed of several flexible materials, namely polytetrafluoroethylene (PTFE), nylon, hydrogels electrode, and silicone rubber substrate. A signal-processing circuit was used in this patch to convert the sensor signal into a more stable signal (the deviation within 0.1 V), which provides a more effective method for sensing and robot control in a wireless way. Thus, the device can be used to control the movement of robots in real-time and exhibits a good stable performance. A specific algorithm was used in this patch to convert the 1D serial number into a 2D coordinate system, so that the click of the finger can be converted into a sliding track, so as to achieve the trajectory generation of a robot in a wireless way. It is believed that the device-based human–machine interaction with minimalist design has great potential in applications for contact perception, 2D control, robotics, and wearable electronics.     

Stretchable,Multi-Layered Stack Antenna for Smart/Wearable Electronic Applications

The development of microelectronics has been achieved by improving its performance through miniaturization. This was possible through the development of silicon-based semiconductor process technology, but recently, the demand for wearable or flexible devices has increased. These devices are made using various functional elements based on materials that are difficult to utilize with semiconductor devices that contain existing hard silicon-based materials and are bent or flexibly stretched. In this study, wireless antennas suitable for wearable devices were implemented in a stretchable form. It was possible to stably receive a wireless signal, even with a strain of 20% or more, and power light-emitting diodes (LEDs), microheaters, etc. By devising a multi-layered stack antenna without the existing semiconductor process, it was possible to improve the antenna’s reception performance. It is expected that this can be applied in various ways to smart wireless sensors and wearable biomedical devices using the near-field communication (NFC) of smartphones.     

A High-Performance Flag-Type Triboelectric Nanogenerator for Scavenging Wind Energy toward Self-Powered IoTs

Pervasive and continuous energy solutions are highly desired in the era of the Internet of Things for powering wide-range distributed devices/sensors. Wind energy has been widely regarded as an ideal energy source for distributed devices/sensors due to the advantages of being sustainable and renewable. Herein, we propose a high-performance flag-type triboelectric nanogenerator (HF-TENG) to efficiently harvest widely distributed and highly available wind energy. The HF-TENG is composed of one piece of polytetrafluoroethylene (PTFE) membrane and two carbon-coated polyethylene terephthalate (PET) membranes with their edges sealed up. Two ingenious internal-structure designs significantly improve the output performance. One is to place the supporting sponge strips between the PTFE and the carbon electrodes, and the other is to divide the PTFE into multiple pieces to obtain a multi-degree of freedom. Both methods can improve the degree of contact and separation between the two triboelectric materials while working. When the pair number of supporting sponge strips is two and the degree of freedom is five, the maximum voltage and current of HF-TENG can reach 78 V and 7.5 μA, respectively, which are both four times that of the untreated flag-type TENG. Additionally, the HF-TENG was demonstrated to power the LEDs, capacitors, and temperature sensors. The reported HF-TENG significantly promotes the utilization of the ambient wind energy and sheds some light on providing a pervasive and sustainable energy solution to the distributed devices/sensors in the era of the Internet of Things.     

Printed Nanocarbon Heaters for Stretchable Sport and Leisure Garments

The ability to maintain body temperature has been shown to bring about improvements in sporting performance. However, current solutions are limited with regards to flexibility, heating uniformity and robustness. An innovative screen-printed Nanocarbon heater is demonstrated which is robust to bending, folding, tensile extensions of up to 20% and machine washing. This combination of ink and substrate enables the heated garments to safely flex without impeding the wearer. It is capable of producing uniform heating over a 15 × 4 cm area using a conductive ink based on a blend of Graphite Nanoplatelets and Carbon Black. This can be attributed to the low roughness of the conductive carbon coating, the uniform distribution and good interconnection of the carbon particles. The heaters have a low thermal inertia, producing a rapid temperature response at low voltages, reaching equilibrium temperatures within 120 s of being switched on. The heaters reached the 40 °C required for wearable heating applications within 20 s at 12 Volts. Screen printing was demonstrated to be an effective method of controlling the printed layer thickness with good interlayer adhesion and contact for multiple printed layers. This can be used to regulate their electrical properties and hence adjust the heater performance.     

A Self-Powered Triboelectric Nanogenerator Based on Intelligent Interactive System for Police Shooting Training Monitoring and Virtual Reality Interaction

A self-powered triboelectric nanogenerator (SPTENG) based on triboelectric effect and an intelligent interactive system are fabricated for monitoring shooting training and virtual training. The SPTENG is composed of latex and PTFE and an intelligent system. Based on triboelectric effect, the SPTENG can be used to monitor the progress of trigger pressing without a power supply (this is supplied by trigger movements). Because of the flexible properties, it can be attached to a trigger conveniently to monitor the progress of trigger pressing, such as trigger time, trigger stability, etc. Meanwhile, as part of an intelligent shooting system, police can formulate a standard scheme according to signals to improve their skills. Furthermore, they can use it to train between reality and virtuality. Therefore, it has a wide development space in human–computer interaction and real-time information processing.     

Piezoelectric A15B16C17 Compounds and Their Nanocomposites for Energy Harvesting and Sensors: A Review

Interest in pyroelectrics and piezoelectrics has increased worldwide on account of their unique properties. Applications based on these phenomena include piezo- and pyroelectric nanogenerators, piezoelectric sensors, and piezocatalysis. One of the most interesting materials used in this growing field are A¹⁵B¹⁶C¹⁷ nanowires, an example of which is SbSI. The latter has an electromechanical coupling coefficient of 0.8, a piezoelectric module of 2000 pC/N, and a pyroelectric coefficient of 12 × 10⁻³ C/m²K. In this review, we examine the production and properties of these nanowires and their composites, such as PAN/SbSI and PVDF/SbSI. The generated electrical response from 11 different structures under various excitations, such as an impact or a pressure shock, are presented. It is shown, for example, that the PVDF/SbSI and PAN/SbSI composites have well-arranged nanowires, the orientation of which greatly affects the value of its output power. The power density for all the nanogenerators based upon A¹⁵B¹⁶C¹⁷ nanowires (and their composites) are recalculated by use of the same key equation. This enables an accurate comparison of the efficiency of all the configurations. The piezo- and photocatalytic properties of SbSI nanowires are also presented; their excellent ability is shown by the high reaction kinetic rate constant (7.6 min⁻¹).     

A Review on Principles,Theories and Materials for Self Sensing Concrete for Structural Applications

Self-sensing concrete is a smart material known for its cost-effectiveness in structural health-monitoring areas, which converts the external stimuli into a stress/strain sensing parameter. Self-sensing material has excellent mechanical and electrical properties that allow it to act as a multifunctional agent satisfying both the strength and structural health-monitoring parameters. The main objective of this review is to understand the theories and principles behind the self-sensing practices. Many review papers have focused on the different types of materials and practices that rely on self-sensing technology, and only a few articles have discussed the theories involved. Understanding the mechanism and the theories behind the conduction mechanism is necessary. This review paper provides an overview of self-sensing concrete, including the principles such as piezoresistivity and piezopermittivity; the tunnelling effect, percolation threshold, and electrical circuit theories; the materials used and methods adopted; and the sensing parameters. The paper concludes with an outline of the application of self-sensing concrete and future recommendations, thus providing a better understanding of implementing the self-sensing technique in construction.     

Fluorescence Glucose Sensing,Part II: Harnessing a Nanostructured Fluorescence Energy Transfer Sensor for Quick Detection of Extremely Small Amounts of Glucose

Fluorescence technique is one of the major solutions for achieving the continuous and noninvasive glucose sensor for diabetes. In this article, a highly sensitive nanostructured sensor is developed to detect extremely small amounts of aqueous glucose by applying fluorescence energy transfer (FRET). A one-pot method is applied to produce the dextran-fluorescein isothiocyanate (FITC)-conjugating mesoporous silica nanoparticles (MSNs), which afterward interact with the tetramethylrhodamine isothiocyanate (TRITC)-labeled concanavalin A (Con A) to form the FRET nanoparticles (FITC-dextran-Con A-TRITC@MSNs). The nanostructured glucose sensor is then formed via the self-assembly of the FRET nanoparticles on a transparent, flexible, and biocompatible substrate, e.g., poly(dimethylsiloxane). Our results indicate the diameter of the MSNs is 60 ± 5 nm. The difference in the images before and after adding 20 μl of glucose (0.10 mmol/liter) on the FRET sensor can be detected in less than 2 min by the laser confocal laser scanning microscope. The correlation between the ratio of fluorescence intensity, I(donor)/I(acceptor), of the FRET sensor and the concentration of aqueous glucose in the range of 0.04–4 mmol/liter has been investigated; a linear relationship is found. Furthermore, the durability of the nanostructured FRET sensor is evaluated for 5 days. In addition, the recorded images can be converted to digital images by obtaining the pixels from the resulting matrix using Matlab image processing functions. We have also studied the in vitro cytotoxicity of the device. The nanostructured FRET sensor may provide an alternative method to help patients manage the disease continuously.     

Fabrication,Structure, and Thermal Properties of Mg–Cu Alloys as High Temperature PCM for Thermal Energy Storage

This work studied the thermophysical properties of Mg-24%Cu, Mg-31%Cu, and Mg-45%Cu (wt.%) alloys to comprehensively consider the possibility of using them as thermal energy storage (TES) phase change materials (PCMs) used at high temperatures. The microstructure, phase composition, phase change temperatures, and enthalpy of these alloys were investigated by an electron probe micro analyzer (EPMA), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The XRD and EPMA results indicated that the binary eutectic phase composed of α-Mg and Mg₂Cu exists in the microstructure of the prepared Mg–Cu series alloys. The microstructure of Mg-24%Cu and Mg-31%Cu is composed of α-Mg matrix and binary eutectic phases, and Mg-45%Cu is composed of primary Mg₂Cu and binary eutectic phases. The number of eutectic phases is largest in Mg-31%Cu alloy. The DSC curves indicated that the onset melting temperature of Mg-24%Cu, Mg-31%Cu, and Mg-45%Cu alloys were 485, 486, and 485 °C, and the melting enthalpies were 152, 215, and 91 J/g. Thermal expansion and thermal conductivity were also determined, revealing that the Mg–Cu alloys had a low linear thermal expansion coefficient and high thermal conductivity with respect to increasing temperatures. In conclusion, the thermal properties demonstrated that the Mg–Cu alloys can be considered as a potential PCM for TES.     

Graphene: A Path-Breaking Discovery for Energy Storage and Sustainability

The global energy situation requires the efficient use of resources and the development of new materials and processes for meeting current energy demand. Traditional materials have been explored to large extent for use in energy saving and storage devices. Graphene, being a path-breaking discovery of the present era, has become one of the most-researched materials due to its fascinating properties, such as high tensile strength, half-integer quantum Hall effect and excellent electrical/thermal conductivity. This paper presents an in-depth review on the exploration of deploying diverse derivatives and morphologies of graphene in various energy-saving and environmentally friendly applications. Use of graphene in lubricants has resulted in improvements to anti-wear characteristics and reduced frictional losses. This comprehensive survey facilitates the researchers in selecting the appropriate graphene derivative(s) and their compatibility with various materials to fabricate high-performance composites for usage in solar cells, fuel cells, supercapacitor applications, rechargeable batteries and automotive sectors.     

Therapy for Unhealed Gastrocutaneous Fistulas in Rats as a Model for Analogous Healing of Persistent Skin Wounds and Persistent Gastric Ulcers: Stable Gastric Pentadecapeptide BPC 157, Atropine, Ranitidine, and Omeprazole

Objective This study focused on unhealed gastrocutaneous fistulas to resolve whether standard drugs that promote healing of gastric ulcers may simultaneously have the same effect on cutaneous wounds, and corticosteroid aggravation, and to demonstrate why peptides such as BPC 157 exhibit a greater healing effect. Therefore, with the fistulas therapy, we challenge the wound/growth factors theory of the analogous nonhealing of wounds and persistent gastric ulcers. Methods The healing rate of gastrocutaneous fistula in rat (2-mm-diameter stomach defect, 3-mm-diameter skin defect) validates macro/microscopically and biomechanically a direct skin wound/stomach ulcer relation, and identifies a potential therapy consisting of: (i) stable gastric pentadecapeptide BPC 157 [in drinking water (10 μg/kg) (12 ml/rat/day) or intraperitoneally (10 μg/kg, 10 ng/kg, 10 pg/kg)], (ii) atropine (10 mg/kg), ranitidine (50 mg/kg), and omeprazole (50 mg/kg), (iii) 6-alpha-methylprednisolone (1 mg/kg) [intraperitoneally, once daily, first application at 30 min following surgery; last 24 h before sacrifice (at postoperative days 1, 2, 3, 7, 14, and 21)]. Results Greater anti-ulcer potential and efficiency in wound healing compared with standard agents favor BPC 157, efficient in inflammatory bowel disease (PL-14736, Pliva), given in drinking water or intraperitoneally. Even after 6-alpha-methylprednisolone aggravation, BPC 157 promptly improves both skin and stomach mucosa healing, and closure of fistulas, with no leakage after up to 20 ml water intragastrically. Standard anti-ulcer agents, after a delay, improve firstly skin healing and then stomach mucosal healing, but not fistula leaking and bursting strength (except for atropine). Conclusion We conclude that BPC 157 may resolve analogous nonhealing of wounds and persistent gastric ulcers better than standard agents.     

Combined Therapy with Ixazomib,Lenalidomide, and Dexamethasone for Polyneuropathy,Organomegaly, Endocrinopathy,Monoclonal Gammopathy,and Skin Changes Syndrome

Objective Immunomodulatory drugs and proteasome inhibitors are therapeutic options for polyneuropathy, organomegaly, endocrinopathy, monoclonal gammopathy, and skin changes (POEMS) syndrome. This study aimed to evaluate the efficacy and safety of the combination of ixazomib, lenalidomide, and dexamethasone (IRd) for POEMS syndrome. Methods Six consecutive patients with POEMS syndrome who were treated with the IRd regimen at Chiba University Hospital between April 2018 and August 2021 were included. Serum M-protein and serum vascular endothelial growth factor (sVEGF) levels, overall neuropathy limitation scales (ONLS), clinical symptoms, and adverse events were assessed. Results Of the six patients, five had received prior treatments. Patients received a median of 5 cycles (range, 3-28 cycles) of IRd. Following treatment, serum M-protein disappeared in two patients, sVEGF levels returned to normal in two patients, two patients showed a reduction in the ONLS of 1, and clinical symptoms improved in four patients. The median level of sVEGF decreased from 2,395 pg/mL (range, 802-6,120 pg/mL) to 1,428 pg/mL (range, 183-3,680 pg/mL) in three months. Adverse events, including rash, neutropenia, sensory peripheral neuropathy, and nausea, were observed in three patients, which necessitated dose reduction or discontinuation of treatment. Conclusion IRd can be a therapeutic option for POEMS syndrome, albeit with careful monitoring of adverse events.     

Characterization and Reliability of Caprylic Acid-Stearyl Alcohol Binary Mixture as Phase Change Material for a Cold Energy Storage System

This study reports the in-depth investigation of the thermophysical properties and thermal reliability of caprylic acid-stearyl alcohol (CA-SA) eutectic phase change material (PCM) for cooling applications. The phase diagram of CA-SA showed a eutectic point at a 90:10 molar ratio. The onset melting/freezing temperature and latent heat of fusion of caprylic acid-stearyl alcohol from the differential scanning calorimetry (DSC) were 11.4 °C/11.8 °C and 154.4/150.5 J/g, respectively. The thermal conductivity for the prepared eutectic PCM in the solid phase was 0.267 W/m.K (0 °C), whereas, in the liquid phase, it was 0.165 W/m.K (20 °C). In addition, the maximum relative percentage difference (RPD) marked at the end of 200 thermal cycles was 5.2% for onset melting temperature and 18.9% for phase change enthalpy. The Fourier transform infrared spectroscopy (FT-IR) result shows that the eutectic PCM holds good chemical stability. Corrosion tests showed that caprylic acid-stearyl alcohol could be a potential candidate for cold thermal energy storage applications.     

A multicenter, double-blind, placebo-controlled trial comparing piperacillin-tazobactam with and without amikacin as empiric therapy for febrile neutropenia.

In a prospective, multicenter, double-blind, randomized clinical trial, we compared the efficacy of piperacillin-tazobactam (4.5 g 3 times daily intravenously) plus placebo versus piperacillin-tazobactam plus amikacin (7.5 mg/kg twice daily intravenously) for the treatment of 760 febrile, adult patients with cancer with chemotherapy-induced profound (<500 neutrophils/mm3) and prolonged (>10 days) neutropenia. A total of 733 patients were assessable for efficacy of the drug regimens, and an overall successful outcome was reported in 49% (179 of 364) of the patients who received monotherapy, compared with 53% (196 of 369) of patients who received combination therapy (P=.2). Response rates were similar with both regimens, as were incidences of bacteremia and clinically documented and possible infections. In our epidemiological setting, the initial empiric combination therapy was not associated with improved outcomes when compared with initial monotherapy.     

Electronic,Structural, and Optical Properties of Mono-Doped and Co-Doped (210) TiO2 Brookite Surfaces for Application in Dye-Sensitized Solar Cells—A First Principles Study

Titanium dioxide (TiO₂) polymorphs have recently gained a lot of attention in dye-sensitized solar cells (DSSCs). The brookite polymorph, among other TiO₂ polymorphs, is now becoming the focus of research in DSSC applications, despite the difficulties in obtaining it as a pure phase experimentally. The current theoretical study used different nonmetals (C, S and N) and (C-S, C-N and S-N) as dopants and co-dopants, respectively, to investigate the effects of mono-doping and co-doping on the electronic, structural, and optical structure properties of (210) TiO₂ brookite surfaces, which is the most exposed surface of brookite. The results show that due to the narrowing of the band gap and the presence of impurity levels in the band gap, all mono-doped and co-doped TiO₂ brookite (210) surfaces exhibit some redshift. In particular, the C-doped, and C-N co-doped TiO₂ brookite (210) surfaces exhibit better absorption in the visible region of the electromagnetic spectrum in comparison to the pure, S-doped, N-doped, C-S co-doped and N-S co-doped TiO₂ brookite (210) surfaces.     

HIV-1 Dynamics: A Reappraisal of Host and Viral Factors,as well as Methodological Issues

The dynamics of HIV-1 viremia is a complex and evolving landscape with clinical and epidemiological (public health) implications. Most studies have relied on the use of set-point viral load (VL) as a readily available proxy of viral dynamics to assess host and viral correlates. This review highlights recent findings from population-based studies of set-point VL, focusing primarily on robust data related to host genetics. A comprehensive understanding of viral dynamics will clearly need to consider both host and viral characteristics, with close attention to (i) the timing of VL measurements, (ii) the biology of viral evolution, (iii) compartments of active viral replication, (iv) the transmission source partner as the immediate past microenvironment, and (v) proper application of statistical models.     

A large-scale outbreak of hand,foot and mouth disease,France, as at 28 September 2021

We report a large-scale outbreak of hand, foot and mouth disease (HFMD) in France. As at 28 September 2021, 3,403 cases have been reported (47% higher than in 2018–19). We prospectively analysed 210 clinical samples; 190 (90.5%) were enterovirus-positive. Most children presented with atypical HFMD. Coxsackievirus (CV)A6 (49.5%; 94/190) was predominant; no enterovirus A71 was detected. Dermatological and neurological complications of HFMD justify prospective syndromic and virological surveillance for early detection of HFMD outbreaks and identification of associated types.     

Enterovirus,mycoplasma and other infections as predictors for myocardial infarction

OBJECTIVES: To study antibodies against five infectious agents for their prediction of major coronary events in men with and without evidence of coronary heart disease at baseline. DESIGN: A case-control study nested within a prospective population study. SUBJECTS: The study cases included 441 men 45-64 years old with nonfatal myocardial infarction or coronary death within a mean follow-up time of 10 years. A total of 165 men had already signs of heart disease at baseline, whilst 276 were apparently healthy at the beginning of the study. Two controls for each case were matched for age, heart disease status and place of residence. Antibodies against enterovirus, Mycoplasma pneumoniae, Chlamydia pneumoniae, cytomegalovirus and adenovirus were determined. RESULTS: Men without reported baseline heart disease, but not those with heart disease, showing the highest quartile of antibodies to enterovirus and mycoplasma or increased levels of immune complex-bound antibodies to chlamydia had a significantly higher risk of coronary events than men with lower level of antibodies. The increased risk demonstrated in men with high levels of antibodies to enterovirus and mycoplasma remained significant after adjustment for other antibodies, acute-phase reactant and conventional risk factors. Serological evidence of infection by multiple agents was also significantly associated with coronary events. CONCLUSIONS: Serological evidence for several infectious agents is associated with the risk of coronary heart disease, but only in men without baseline history of heart disease.