冬凌草甲素固体分散体的制备及溶解性能研究

目的采用固体分散技术,提高冬凌草甲素的体外溶解性能。方法分别以聚乙二醇6000（PEG6000）、聚乙烯吡咯烷酮K30（PVPK30）为载体,制备冬凌草甲素固体分散体。采用紫外分光光度法进行含量测定,差示热分析法鉴别药物在载体中的存在状态,并进行溶解度、体外溶出速率实验。结果两种载体的固体分散体均能增加药物的溶解度和溶出速率,冬凌草甲素在载体中以高度分散状态存在。结论以PVPK30为载体制备的冬凌草甲素固体分散体体外溶解度和溶出速率明显提高。     

冬凌草甲素固体分散体的制备及溶解性能研究

目的 采用固体分散技术,提高冬凌草甲素的体外溶解性能。方法 分别以聚乙二醇6000(PEG6000)、聚乙烯吡咯烷酮K30(PVPK30)为载体,制备冬凌草甲素固体分散体。采用紫外分光光度法进行含量测定,差示热分析法鉴别药物在载体中的存在状态,并进行溶解度、体外溶出速率实验。结果 两种载体的固体分散体均能增加药物的溶解度和溶出速率,冬凌草甲素在载体中以高度分散状态存在。结论 以 PVPK30为载体制备的冬凌草甲素固体分散体体外溶解度和溶出速率明显提高。     

环孢素固体分散体的制备及溶出研究

目的: 提高难溶性药物环孢素(CsA)的溶出速率.方法: 选择聚乙二醇(PEG4000)和聚乙烯吡咯烷酮(PVPK30)两种载体,分别以溶剂熔融法和溶剂法制备CsA固体分散体;建立HPLC法检测固体分散体的体外溶出度,并考察不同载体、不同比例及溶出介质、桨法转速对CsA溶出速率的影响.对溶出度结果用Weibull分布模型进行拟合,计算体外溶出参数T50和Td,并进行方差分析.结果: 使用HPLC法测定CsA的体外溶出量准确、稳定、可靠、载体无干扰.制备成的固体分散体能显著提高CsA的体外溶出速率,PVPK30载体的固体分散体的溶出速率明显快于PEG4000载体的固体分散体.溶出介质对药物溶出没有明显影响.结论: CsA: PVPK30为1: 6的固体分散体具有良好的体外速释作用.     

米非司酮固体分散体的制备及性质研究

目的:增加米非司酮的溶解度和体外溶出速率,为阴道环的成功制备奠定基础。方法:以PVPK30为载体,采用溶剂法制备米非司酮固体分散体。考察其体外溶出特性,并采用差示扫描量热法、红外光谱法和粉末X-射线衍射法鉴别药物在固体分散体中的存在状态。结果:固体分散体大大提高了米非司酮的溶出速率,最佳比例为1∶3。药物在分散体中以无定型状态存在。结论:溶剂法制备的固体分散体可显著提高药物的溶出速率,从而提高了阴道环中药物的释放量。     

硝苯地平固体分散体制备工艺的研究

目的利用固体分散技术将硝苯地平制成固体分散体,提高其体外溶出速率。方法分别以聚乙二醇6000(PEG6000)、聚乙二醇4000(PEG4000)、聚乙烯吡咯烷酮K30(PVPK30)、泊洛沙姆188(Pluronic F68)等为载体,用熔融法、溶剂法、溶剂-熔融法和喷雾干燥法制备硝苯地平固体分散体。采用差热分析法(DTA)分析药物在固体分散体中的存在状态,并进行体外溶出度试验。结果各种固体分散体均能加快药物的溶出速率,并且随着载体在固体分散体中的比例增大,溶出速率增大。DTA分析显示硝苯地平在PVPK30的固体分散体中以微细结晶存在。结论将硝苯地平制成固体分散体能显著提高硝苯地平的体外溶出速率。     

硝苯地平固体分散体制备工艺的研究

目的利用固体分散技术将硝苯地平制成固体分散体,提高其体外溶出速率。方法分别以聚乙二醇6000(PEG6000)、聚乙二醇4000(PEG4000)、聚乙烯吡咯烷酮K30(PVPK30)、泊洛沙姆188(Pluronic F68)等为载体,用熔融法、溶剂法、溶剂-熔融法和喷雾干燥法制备硝苯地平固体分散体。采用差热分析法(DTA)分析药物在固体分散体中的存在状态,并进行体外溶出度试验。结果各种固体分散体均能加快药物的溶出速率,并且随着载体在固体分散体中的比例增大,溶出速率增大。DTA分析显示硝苯地平在PVPK30的固体分散体中以微细结晶存在。结论将硝苯地平制成固体分散体能显著提高硝苯地平的体外溶出速率。     

伊曲康唑固体分散体制备及体外溶出实验

目的:运用固体分散体技术提高难溶性药物伊曲康唑的溶解度及体外溶出速率.方法:选用聚乙烯吡咯烷酮(PVPK30)为载体,采用喷雾干燥法制备伊曲康唑固体分散体,通过差热分析及X射线衍射对固体分散体进行鉴定,比较考察伊曲康唑及其物理混合物和固体分散体的溶出特性.结果:差热分析、X射线衍射图谱表明药物以无定形状态分散于载体中;体外溶出结果表明固体分散体能显著增加药物在水及人工胃液中的溶出度(45 min时1:4固体分散体体外溶出度为伊曲康唑的11.5倍.1:4固体分散体在0.1 mo1·L-1盐酸中溶解度是伊曲康唑的67倍).结论:伊曲康唑固体分散体能明显提高伊曲康唑的溶解度及体外溶出速率.     

马来酸罗格列酮固体分散体及其溶出速率

目的提高难溶性药物马来酸罗格列酮的体外溶出速率 ,满足脉冲制剂的设计要求。方法选用PVPK3 0为载体 ,用溶剂法制备了马来酸罗格列酮固体分散体 ,比较考察了原料药及其物理混合物和固体分散体的溶出差别 ,并通过红外光谱及X 射线粉末衍射对固体分散体进行了鉴定。结果体外溶出结果表明固体分散体能显著增加药物在水中及人工肠液中的溶出速率 ;红外光谱分析结果表明药物与载体之间没有发生化学反应 ;X 射线粉末衍射图谱表明药物以无定形状态分散于载体PVPK3 0中。结论固体分散体体外溶出速率的提高可以满足脉冲制剂的设计要求。     

微管蛋白抑制剂SUD-35固体分散体的制备、鉴定及初步体外药效学研究

目的将难溶性微管蛋白抑制剂SUD-35制备成固体分散体,以增加其溶解度及溶出速率。方法以聚乙二醇6000为载体,溶剂-熔融法制备SUD-35固体分散体。采用差示扫描量热分析与X-射线衍射观察药物在载体中的存在状态,并进行溶解度和体外溶出度研究。采用MTT法对SUD-35固体分散体对小鼠白血病L1210细胞药效进行测定。结果 SUD-35固体分散体中SUD-35的溶解度和溶出速率相对原料药和物理混合物均有明显提高,差示扫描量热分析与X-射线衍射结果显示SUD-35以无定型状态存在于固体分散体中,细胞药效结果显示SUD-35固体分散体对小鼠白血病L1210细胞增殖抑制率强于SUD-35纯药。结论聚乙二醇6000为载体制备SUD-35固体分散体,可显著提高SUD-35的溶解度及溶出速率。     

盐酸溴己新固体分散体制备及体外溶出实验

目的制备盐酸溴己新（BH）固体分散体并研究其体外溶出度。方法以聚乙烯吡咯烷酮（PVP）为载体,采用喷雾干燥法制备难溶性药物盐酸溴己新固体分散体,并进行体外溶出实验。结果制备成的固体分散体能显著提高盐酸溴己新的体外溶出速率,PVPk-15载体的固体分散体溶出较PVPk-30载体的固体分散体快。随着PVPk-15载体比例增加,固体分散体的溶出先增大后减小,BH-PVPk-15为1∶5时的固体分散体具有良好的体外速释作用。结论将盐酸溴己新制成固体分散体能明显提高其溶解度及体外释放速率。     

布格呋喃固体分散体的体外研究

布格呋喃(buagafuran,AF-5)是以( )香芹酮为起始原料通过立体选择性合成的沉香呋喃类化合物[1].它具有显著的抗焦虑作用,毒副作用低,市场前景广阔.布格呋喃为油状液体,脂溶性强,不溶于水.用植物油稀释进行小鼠灌胃,抗焦虑活性与空白组比较无统计学意义,不能较好地发挥药效.室温放置易发生降解,化学稳定性差.这些缺     

固体分散体提高银杏叶片溶出度的研究

目的:通过制备固体分散体提高银杏叶片中银杏叶提取物(EGb)的溶出度.方法:采用溶剂熔融法、喷雾干燥法制备聚乙二醇6000(PEG 6000)和聚乙烯吡咯烷酮K17(PVPK17)2种载体材料、不同比例的固体分散体,并比较固体分散体、物理混合物和EGb、市售普通片的溶出特性.对EGb-PEG 6000固体分散体进行差示热扫描(DSC)分析.结果:溶剂熔融法和喷雾干燥法可制备不同比例的PEG 6000,PVPK17的EGb固体分散体,EGb-PEG 6000(1:2)固体分散体片溶出度增加明显,且增溶效果优干EGb-PVPK17固体分散体.结论:EGb-PEG 6000(1:2)固体分散体能有效提高银杏叶片的溶出度.     

Enhanced solubility and permeability of exemestane solid dispersion powders for improved oral delivery

The aim of the present investigation was to enhance the solubility of exemestane (EXM), by solid dispersion (SD) technique using PEG 6000 as a carrier. Phase solubility studies were conducted with PEG 6000 and PEG 20000 to evaluate the effect of carriers on aqueous solubility of EXM. The aqueous solubility of EXM was favoured with PEG 6000 compared to PEG 20000. SDs of EXM using polyethylene glycol 6000 (PEG 6000) as carrier were prepared in different drug to carrier ratios. Solid-state characterization indicated decrease in crystallinity of the drug. The in vitro dissolution rate of EXM was enhanced from both SDs and tablet formulations prepared using SD compared to pure EXM. The in situ permeability studies investigated using single-pass intestinal perfusion technique in rats revealed increase in effective intestinal permeability (P_eff, cm/s) by 4.45 folds with SDs. Thus, EXM-PEG 6000 SDs showed improved solubility and permeability.     

依托泊苷固体分散体的制备及体外研究

目的 制备依托泊苷固体分散体，改善依托泊苷的溶出度。方法 应用聚乙烯吡咯烷酮（PVPK30）和聚乙二醇（PEG6000）为载体，以溶剂法制备固体分散体。采用正交实验设计考察制备固体分散体的最佳工艺条件，并对所得样品进行体外溶出度研究，以X线衍射、DSC-量热分析进行物相鉴定。结果 依托泊苷在载体PVPK30和PEG6000中结晶消失。药物的溶出速度随载体比例增加而增加。结论 采用PVPK30和PEG6000所制依托泊苷固体分散体能显著提高药物的体外溶出度，药物以无定形状态或分子态存在于载体中。     

Enhanced dissolution and oral bioavailability of valsartan solid dispersions prepared by a freeze-drying technique using hydrophilic polymers

This study aimed to improve the dissolution rate and oral bioavailability of valsartan (VAL), a poorly soluble drug using solid dispersions (SDs). The SDs were prepared by a freeze-drying technique with polyethylene glycol 6000 (PEG6000) and hydroxypropylmethylcellulose (HPMC 100KV) as hydrophilic polymers, sodium hydroxide (NaOH) as an alkalizer, and poloxamer 188 as a surfactant without using any organic solvents. In vitro dissolution rate and physicochemical properties of the SDs were characterized using the USP paddle method, differential scanning calorimetry (DSC), X-ray diffractometry (XRD) and Fourier transform-infrared (FT-IR) spectroscopy, respectively. In addition, the oral bioavailability of SDs in rats was evaluated by using VAL (pure drug) as a reference. The dissolution rates of the SDs were significantly improved at pH 1.2 and pH 6.8 compared to those of the pure drug. The results from DSC, XRD showed that VAL was molecularly dispersed in the SDs as an amorphous form. The FT-IR results suggested that intermolecular hydrogen bonding had formed between VAL and its carriers. The SDs exhibited significantly higher values of AUC_0–24?h and C_max in comparison with the pure drug. In conclusion, hydrophilic polymer-based SDs prepared by a freeze-drying technique can be a promising method to enhance dissolution rate and oral bioavailability of VAL.     

尼美舒利固体分散体的非pH依赖性释放研究

目的以尼美舒利为难溶弱酸性模型药物,研究提高该类药物释放速率的方法。方法以聚乙二醇6000(PEG6000)为载体,采用熔融法制备尼美舒利固体分散体;测定含不同碱化剂(包括NaOH、KOH、Ca(OH)2、Na2CO3、CaCO3)的尼美舒利固体分散体中药物的释放速率。结果加入碱化剂能显著增加尼美舒利在蒸馏水中的释放度,碱化剂不同,药物的释放度不同;碱化剂的碱性越强,分散体的颜色越深,其吸湿性也相对越大。结论在尼美舒利PEG6000固体分散体中加入碱化剂可显著改善该类药物的体外释放特点,并呈现明显的非pH依赖性。     

Improvement of solubility and dissolution rate of indomethacin by solid dispersions in Gelucire 50/13 and PEG4000

The aim of this study was to prepare and characterize solid dispersions of water insoluble non-steroidal anti-inflammatory drug, indomethacin (IND), with polyethylene glycol 4000 (PEG4000) and Gelucire 50/13 (Gelu.) for enhancing the dissolution rate of the drug. The solid dispersions (SDs) were prepared by hot melting method at 1:1, 1:2 and 1:4 drug to polymer ratios. Scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) were used to examine the physical state of the drug. Furthermore, the solubility and the dissolution rate of the drug in its different systems were explored. The data from the XRD showed that the drug was still detectable in its solid state in all SDs of IND–Gelu. and disappeared in case of higher ratio of IND–PEG4000. DSC thermograms showed the significant change in melting peak of the IND when prepared as SDs suggesting the change in crystallinity of IND. The highest ratio of the polymer (1:4) enhanced the drug solubility about 4-folds or 3.5-folds in case of SDs of IND–PEG or IND–Gelu., respectively. An increased dissolution rate of IND at pH 1.2 and 7.4 was observed when the drug was dispersed in these carriers in form of physical mixtures (PMs) or SDs. IND released faster from the SDs than from the pure crystalline drug or the PMs. The dissolution rate of IND from its PMs or SDs increased with an increasing amount of polymer.     

Formulation and in vivo hypoglycemic effect of glipizide solid dispersion

The present study was carried out with a view to enhance dissolution rate of poorly water-soluble drug glipizide (GZ) (BCS class II) using polyethylene glycol (PEG) 6000, PEG 8000 and poloxamer (PXM) 188 as carriers. Solid dispersions (SDs) were prepared by melting method using different ratios of glipizide to carriers. Phase solubility study was conducted to evaluate the effect of carrier on aqueous solubility of glipizide. SD was optimized by drug content estimation and in vitro dissolution study and optimised SD was subjected to bulk characterization, Scanning electron microscopy (SEM), Fourier transformation infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC) and X-ray diffraction study (XRD). Preclinical study was performed in mice to study the decrease in blood glucose level from prepared SD compared with pure drug. Due to high solubility and drug release, PXM 188 in weight ratio of 1:2 was optimized. Decrease in blood glucose level in mice from SD was significantly higher (p < 0.05) compared to pure glipizide. Thus, solid dispersion technique can be successfully used for the improvement of the dissolution profile of GZ.