Nasal absorption of metoclopramide from different Carbopol 981 based formulations: In vitro, ex vivo and in vivo evaluation.

There is a need for nasal drug delivery of metoclopramide HCI (MTC) in specific patient populations where the use of commercially available intravenous and oral dosage forms may be inconvenient and/or unfeasible. In this perspective, nasal dosage forms (solution, gel and lyophilized powder) of MTC were prepared by using a mucoadhesive polymer Carbopol 981 (CRB 981). The drug release studies of formulations were performed by using a modified horizontal diffusion chamber with cellulose membrane and excised cattle nasal mucosa as diffusion barriers. After the ex vivo experiments, the morphological appearances of the nasal mucosa were analyzed with the light microscopic studies. In vivo experiments were carried on sheep model. The release of MTC from solution and powder formulations was found higher than gel formulation (p < 0.05) and no severe damage was found on the integrity of nasal mucosa after ex vivo experiments. The penetration enhancing effect of dimethyl-beta-cyclodextrin (DM-beta-CD) used in powder formulations was observed in ex vivo and in vivo experiments. In contrast to in vitro and ex vivo experiments the nasal bioavailability of gel formulation was found higher than those of the solution and powder (p < 0.05) and might represent a promising novel tool for the systemic delivery of MTC.     

盐酸利多卡因鼻用温敏型凝胶的制备及其体外释放度研究

目的：研制盐酸利多卡因温敏凝胶并考察其释药机制。方法：以泊洛沙姆P407为凝胶材料,以泊洛沙姆P188、PEG6000调节胶凝温度,并采用正交试验筛选处方,采用数学模型拟合释放曲线。结果：盐酸利多卡因温敏凝胶在32～33℃胶凝,释药行为符合Higuchi方程。结论：盐酸利多卡因温敏凝胶处方设计合理,可进一步研究开发。     

Formulation,characterization, and in vitro/ex vivo evaluation of quercetin-loaded microemulsion for topical application

The aim of this study was to develop a new microemulsion formulation for topical application of poorly soluble drug named quercetin. In order to design suitable microemulsion system, the pseudo-ternary phase diagrams of microemulsion systems were constructed at different surfactant/co-surfactant ratios using tween 80 as surfactant, transcutol^® P as a co-surfactant and oleic acid as an oil phase. Some physicochemical properties such as droplet size, density, refractive index, electrical conductivity, pH, surface tension, and viscosity of the microemulsion systems were measured at 298.15 K. The average hydrodynamic droplet size of the optimized microemulsions was obtained by dynamic light scattering method. Morphology assessment of the optimized quercetin-loaded microemulsion by transmission electron microscopy analysis indicated that the particles have the size of about 25?nm and spherical with narrow size distribution. Equilibrium solubility, in vitro drug release at a 24?h time period, release kinetic evaluation as well as ex vivo permeation and retention of quercetin-loaded microemulsions through rat skin has been investigated. The obtained results showed a slow release behavior without any transdermal delivery. Most of the formulations fitted best with zero-order kinetic model with a non-Fickian mechanisms. This study illustrated that the proposed QU-microemulsion has a good potential for use in sunscreen formulations.

     

Controlled release effervescent buccal discs of buspirone hydrochloride: in vitro and in vivo evaluation studies

Abstract

In the present study controlled release effervescent buccal discs of buspirone hydrochloride (BS) were designed using HPMC as rate controlling and bioadhesive polymer by direct compression method. Sodium bicarbonate and citric acid were used in varying amounts as effervescence forming agents. Carbon dioxide evolved due to reaction of sodium bicarbonate and citric acid was explored for its potential as buccal permeation enhancer. The designed buccal discs were evaluated for physical characteristics and in vitro drug release studies. Bioadhesive behavior of designed buccal discs was assessed using texture analyzer. In vivo animal studies were performed in rabbits to study bioavailability of BS in the designed buccal discs and to establish permeation enhancement ability of carbon dioxide. It was observed that effervescent buccal discs have faster drug release compared to non-effervescent buccal discs in vitro and effervescent buccal discs demonstrated significant increase in bioavailability of drug when compared to non-effervescent formulation. Hence, effervescent buccal discs can be used as an alternative to improve the drug permeation resulting in better bioavailability. However, the amount of acid and base used for generation of carbon dioxide should be selected with care as this may damage the integrity of bioadhesive dosage form.     

Lack of interaction between metoclopramide and morphine in vitro and in mice

1.?This study examined interactions via common metabolism or via common pharmacodynamic pathways between frequently co-prescribed metoclopramide (a prokinetic) and morphine (an opioid analgesic).

2.?In human liver microsomes, morphine 3-glucuronide and morphine 6-glucuronide formation had V_max estimates of 6.2 ± 0.07 and 0.75 ± 0.01 (nmole min^?1 mg^?1 protein) and K_m estimates of 1080 ± 37 and 665 ± 55 (µM), respectively. The in vitro K_i for morphine 3-glucuronide formation in the presence of metoclopramide in human liver microsomes or recombinant uridine diphosphoglucuronosyltransferase 2B7 predicted a lack of in vivo interaction.

3.?Morphine (2 mg kg^?1 subcutaneously) delayed gastrointestinal meal transit in mice, metoclopramide (10 mg kg^?1 subcutaneously) had no effect on meal transit, and metoclopramide did not alter this effect of morphine.

4.?Morphine (2 or 5 mg kg^?1 subcutaneously) was antinociceptive in mice (hot plate test) and metoclopramide (10 mg kg^?1 subcutaneously) did not alter the antinociceptive effects of morphine.

5.?Together, the data suggest a lack of interaction between morphine and metoclopramide.     

In vitro and in vivo evaluation of ranitidine hydrochloride loaded hollow microspheres in rabbits

The objective of this investigation was to develop the hollow microspheres as a new dosage form of floating drug delivery systems with prolonged stomach retention time. Hollow microspheres containing ranitidine hydrochloride (RH) were prepared by a novel solvent diffusion-evaporation method using ethyl cellulose (EC) dissolved in a mixture of ethanol and ether (6:1.0, v/v). The yield and drug loading amount of hollow microspheres were 83.21±0.28% and 20.71±0.32%, respectively. The in vitro release profiles showed that the drug release rate decreased with increasing viscosity of EC and the diameter of hollow microspheres, while increased with the increase of RH/EC weight ratio. Hollow microspheres could prolong drug release time (approximately 24 h) and float over the simulate gastric fluid for more than 24 h. Pharmacokinetic analysis showed that the bioavailability from RH-hollow microspheres alone was about 3.0-times that of common RH gelatin capsules, and it was about 2.8-times that of the solid microspheres. These results demonstrated that RH hollow microspheres were capable of sustained delivery of the drug for longer period with increased bioavailability.     

In vitro and in vivo evaluation of drug release from semisolid dosage forms

This study presents the in vitro and in vivo testing of anti-inflammatory drug containing creams, hydrogels and organogels for dermal use. In vitro penetration studies were performed with products by measuring the diffused drug amount through synthetic membranes soaked in isopropyl myristate (IPM). Our developed preparations were investigated under in vitro conditions together with two marketed medicinal products used as reference preparations. In vivo studies were carried out on anaesthetized male Wistar rats; the carrageenan-induced paw oedema decreasing effect of twelve different formulations and the reference products were measured in comparison with a control group. All - previously in vitro screened - selected products reduced paw oedema in rats. Significant differences were found among the developed products both in vitro and in vivo. Correlation between the in vitro penetration studies and in vivo results were found in the case of o/w creams, organogels and hydrogels.     

Fluconazole nanoparticles prepared by antisolvent precipitation technique: Physicochemical,in vitro,ex vivo and in vivo ocular evaluation

The goal of this research was to prepare and characterize nanonized particles of the antifungal drug, fluconazole (FLZ) using antisolvent precipitation nanonization technique to improve its ocular permeation. The impact of various concentrations of different stabilizers, namely Pluronic F-127 (PL F 127), Kollicoat IR (KL), hydroxypropyl methylcellulose E3 (HPMC), xanthan gum (XG), polyvinyl pyrrolidone K30 (PVP), and sodium lauryl sulfate (SLS) upon the resulting nanoparticles was investigated. Additionally, the ex vivo release of the FLZ nanonized particles from ophthalmic gel bases was studied by using goat cornea, and the ocular pharmacokinetics of appropriate ophthalmic gel base containing optimized drug nanoparticle formula compared to the untreated drug were studied in rabbits. FLZ nanoparticles were successfully prepared with different concentrations of stabilizers. However, the effects of these stabilizers on nanoparticle size and zeta potential values varied according to the concentration and type of stabilizer used. Based on differential scanning calorimetry, the drug was in its amorphous state in the tested nanoparticle formulations. The results of ex vivo ocular diffusion of the FLZ nanoparticle gel formulations revealed an improvement compared to that with the FLZ untreated gel. Nanoparticle formula (F3) prepared by using 5% PL F127 showed small particle size (352 ± 6.1 nm) with zeta potential value of −18.3 mV with highest ex vivo release rate from goat cornea (100% after 6 h). Moreover, the AUC_0-8h from ocular application of FLZ from sodium alginate gel containing nanoparticle formula F3 was 1.4-fold higher than that after its administration in the untreated formula. Based on our findings, the ophthalmic gel formulations containing FLZ nanoparticles enhanced drug corneal permeation and improved the ocular pharmacokinetic parameters.     

Olive oil and clove oil-based nanoemulsion for topical delivery of terbinafine hydrochloride: in vitro and ex vivo evaluation

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96–98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.     

Paediatric drug development of ramipril: reformulation,in vitro and in vivo evaluation

Ramipril is used mainly for the treatment of hypertension and to reduce incidence of fatality following heart attacks in patients who develop indications of congestive heart failure. In the paediatric population, it is used most commonly for the treatment of heart failure, hypertension in type 1 diabetes and diabetic nephropathy. Due to the lack of a suitable liquid formulation, the current study evaluates the development of a range of oral liquid formulations of ramipril along with their in vitro and in vivo absorption studies. Three different formulation development approaches were studied: solubilisation using acetic acid as a co-solvent, complexation with hydroxypropyl-β-cyclodextrin (HP-β-CD) and suspension development using xanthan gum. Systematic optimisation of formulation parameters for the different strategies resulted in the development of products stable for 12 months at long-term stability conditions. In vivo evaluation showed C_max of 10.48?µg/ml for co-solvent, 13.04?µg/ml for the suspension and 29.58?µg/ml for the cyclodextrin-based ramipril solution. Interestingly, both ramipril solution (co-solvent) and the suspension showed a T_max of 2.5?h, however, cyclodextrin-based ramipril produced T_max at 0.75?h following administration. The results presented in this study provide translatable products for oral liquid ramipril which offer preferential paediatric use over existing alternatives.     

环糊精在鼻腔给药系统中的应用

综述了环糊精作为鼻腔给药系统赋形剂的应用及安全性.     

In vitro and in vivo evaluation of targeting efficiency of Adriamycin hydrochloride magnetic microspheres

The objective of this study was to prepare magnetic microspheres as a targeting drug delivery system and to specifically evaluate its targeting efficiency. The magnetic microspheres were prepared by emulsion cross-linking techniques. Targeting efficiency was specifically investigated by experiments of biodistribution on rats and histological study. Adriamycin hydrochloride (ADR)-loaded magnetic microspheres were successfully prepared with the mean diameter of 3.853 μm (± 1.484 μm), and had its speciality of superparamagnetism. The results of the targeting efficiency study showed that application of the external magnetic field significantly increased the ADR concentration from 40.28 μg/ml to 100.70 μg/ml at 10?min, 36.99 μg/ml to 91.16 μg/ml at 60?min, and 13.71 μg/ml to 28.30 μg/ml at 180?min in liver as the targeting tissue. The relative uptake efficiencies in liver by injection treatment of ADR magnetic microspheres with external magnetic field were 3.87, 5.59, and 3.34 at 10?min, 60?min, and 180?min after administration, respectively. In conclusion, distinguished targeting efficiency was displayed, which indicated that the magnetic microspheres could be applied as a novel targeting drug delivery system.     

Novel gastroretentive dosage forms: evaluation of gastroretentivity and its effect on riboflavin absorption in dogs

Purpose. The purpose of this study was to design novel gastroretentive dosage forms (GRDFs) based on unfolding multilayer polymeric films, to investigate the mechanism of their gastroretentivity in dogs, and to assess the effect of compounding a narrow absorption window drug in a GRDF on the drug's absorption properties. Methods. Dosage forms (DFs) with different dimensions and mechanical properties were administered to beagle dogs with acidic buffer (pH=1.5), whose gastric retention time (GRT) was then determined by X-ray pictures. Concurrent administration of radiopaque markers was used to assess the effect of the GRDF and/or acidic buffer on GRT. The absorption of riboflavin from a prototype GRDF was compared with a nongastroretentive controlled-release DF and to an oral solution of the drug. Results. Large DFs (2.5 × 2.5 cm) containing rigid frame had prolonged GRT (>4 h). Administration of 400 mL of acidic buffer (or water) prolonged GRT whereas the GRDF did not cause additional prolongation. The extended absorption phase (>48 h) of riboflavin administered in a GRDF led to 4-fold increased bioavailability. Conclusion. The combination of large dimensions with rigidity produce gastroretentivity that can be used to improve absorption properties of a model of narrow absorption window drugs in the gastrointestinal tract.     

Ocular ketoconazole-loaded proniosomal gels: formulation,ex vivo corneal permeation and in vivo studies

Context: Vesicular drug carriers for ocular delivery have gained a real potential. Proniosomal gels as ocular drug carriers have been proven to be an effective way to improve bioavailability and patient compliance.

Objective: Formulation and in vitro/ex vivo/in vivo characterization of ketoconazole (KET)-loaded proniosomal gels for the treatment of ocular keratitis.

Materials and methods: The effect of formulation variables; HLB value, type and concentration of non-ionic surfactants (Tweens, Spans, Brijs and Pluronics) with or without lecithin on the entrapment efficiency (EE%), vesicle size and in vitro KET release was evaluated. An ex vivo corneal permeation study to determine the level of KET in the external eye tissue of albino rabbits and an in vivo assessment of the level of KET in the aqueous humors were performed.

Results and discussion: In vivo evaluation showed an increase in bioavailability up to 20-folds from the optimum KET proniosomal gel formula in the aqueous humor compared to drug suspension (KET-SP). The selected formulae were composed of spans being hydrophobic suggesting the potential use of a more hydrophobic surfactant as Span during the formulation of formulae. Factors that stabilize the vesicle membrane and increase the entrapment efficiency of KET (namely low HLB, long alkyl chain, high phase transition temperature) slowed down the release profile.

Conclusions: Proniosomal gels as drug delivery carriers were proven to be a promising approach to increase corneal contact and permeation as well as retention time in the eye resulting in a sustained action and enhanced bioavailability.     

不同固体剂型盐酸伐昔洛韦制剂的溶出度考查

目的：比较4个不同厂家固体制剂盐酸伐昔洛韦片剂和胶囊的溶出度,为临床用药提供参考。方法：采用紫外分光光度法测定盐酸伐昔洛韦含量,转篮法测定溶出度,并以威布尔分布模型拟合溶出参数,再对T50,Td,m进行统计分析。结果：4个厂家不同固体剂型中盐酸伐昔洛韦片剂和胶囊剂的溶出度均符合2005年版《中国药典》规定,其T50、Td、m值两两间均存在显著性差（P（0.05）。结论：该方法操作简便、准确,可用于该药溶出度的测定。     

盐酸格拉司琼鼻用温敏型凝胶的制备及其体外释放度研究

目的研制盐酸格拉司琼鼻用温敏型凝胶并考察其体外释药行为。方法以泊洛沙姆407为凝胶材料，泊洛沙姆188及聚乙二醇6000调节胶凝温度，正交试验法优选处方，并采用数学模型拟合体外释放曲线。结果盐酸格拉司琼鼻用温敏型凝胶在32～33％胶凝，体外释药行为符合Higuchi方程。结论盐酸格拉司琼鼻用温敏型凝胶处方设计合理，可进一步研究开发。     

Formulation and in vitro/in vivo evaluation of chitosan-based film forming gel containing ketoprofen

The film forming gel, adhered to skin surfaces upon application and formed a film, has an advantage onto skin to provide protection and continuous drug release to the application site. This study aimed to prepare a chitosan-based film forming gel containing ketoprofen (CbFG) and to evaluate the CbFG and film from CbFG (CbFG-film). CbFG were prepared with chitosan, lactic acid and various skin permeation enhancers. The physicochemical characteristics were evaluated by texture analysis, viscometry, SEM, DSC, XRD and FT-IR. To identify the mechanism of skin permeation, in vitro skin permeation study was conducted with a Franz diffusion cell and excised SD-rat and hairless mouse dorsal skin. In vivo efficacy assessment in mono-iodoacetate (MIA)-induced rheumatoid arthritis animal model was also conducted. CbFG was successfully prepared and, after applying CbFG to the excised rat dorsal skin, the CbFG-film was also formed well. The physicochemical characteristics of CbFG and CbFG-film could be explained by the grafting of oleic acid onto chitosan in the absence of catalysts. In addition, CbFG containing oleic acid had a higher skin permeation rate in comparison with any other candidate enhancers. The in vivo efficacy study also confirmed significant anti-inflammatory and analgesic effects. Consequently, we report the successful preparation of chitosan-based film forming gel containing ketoprofen with excellent mechanical properties, skin permeation and anti-inflammatory and analgesic effects.     

In vitro and ex vivo experimental models for evaluation of intranasal systemic drug delivery as well as direct nose-to-brain drug delivery

The intranasal route of administration provides a noninvasive method to deliver drugs into the systemic circulation and/or directly into the brain. Direct nose-to-brain drug delivery offers the possibility to treat central nervous system diseases more effectively, as it can evade the blood–brain barrier. In vitro and ex vivo intranasal models provide a means to investigate physiological and pharmaceutical factors that could play a role in drug delivery across the nasal epithelium as well as to determine the mechanisms involved in drug absorption from the nose. The development and implementation of cost-effective pharmacokinetic models for intranasal drug delivery with good in vitro-in vivo correlation can accelerate pharmaceutical drug product development and improve economic and ecological aspects by reducing the time and costs spent on animal studies. Special considerations should be made with regard to the purpose of the in vitro/ex vivo study, namely, whether it is intended to predict systemic or brain delivery, source and site of tissue or cell sampling, viability window of selected model, and the experimental setup of diffusion chambers. The type of model implemented should suit the relevant needs and requirements of the project, researcher, and interlaboratory. This review aims to provide an overview of in vitro and ex vivo models that have been developed to study intranasal and direct nose-to-brain drug delivery.     

Nanoemulsion gel-based topical delivery of an antifungal drug: in vitro activity and in vivo evaluation

Abstract

Objective: In this study, attempt has been focused to prepare a nanoemulsion (NE) gel for topical delivery of amphotericin B (AmB) for enhanced as well as sustained skin permeation, in vitro antifungal activity and in vivo toxicity assessment.

Materials and methods: A series of NE were prepared using sefsol-218 oil, Tween 80 and Transcutol-P by slow spontaneous titration method. Carbopol gel (0.5%?w/w) was prepared containing 0.1%?w/w AmB. Furthermore, NE gel (AmB-NE gel) was characterized for size, charge, pH, rheological behavior, drug release profile, skin permeability, hemolytic studies and ex vivo rat skin interaction with rat skin using differential scanning calorimeter. The drug permeability and skin irritation ability were examined with confocal laser scanning microscopy and Draize test, respectively. The in vitro antifungal activity was investigated against three fungal strains using the well agar diffusion method. Histopathological assessment was performed in rats to investigate their toxicological potential.

Results and discussion: The AmB-NE gel (18.09?±?0.6?µg/cm²/h) and NE (15.74?±?0.4?µg/cm²/h) demonstrated the highest skin percutaneous permeation flux rate as compared to drug solution (4.59?±?0.01?µg/cm²/h) suggesting better alternative to painful and nephrotoxic intravenous administration. Hemolytic and histopathological results revealed safe delivery of the drug. Based on combined results, NE and AmB-NE gel could be considered as an efficient, stable and safe carrier for enhanced and sustained topical delivery for AmB in local skin fungal infection.

Conclusion: Topical delivery of AmB is suitable delivery system in NE gel carrier for skin fungal infection.     

Agomelatine-based in situ gels for brain targeting via the nasal route: statistical optimization,in vitro,and in vivo evaluation

Agomelatine (AGM) is an antidepressant drug with a low absolute bioavailability due to the hepatic first pass metabolism. AGM-loaded solid lipid nanoparticles were formulated in the form of an in situ gel to prolong the intranasal retention time and subsequently to increase the absorbed amount of AGM. The optimized in situ gel formula had a sol–gel transition temperature of 31?°C?±?1.40, mucociliary transport time of 27?min ±1.41%, released after 1 and 8?h of 46.3%?±?0.85 and 70.90%?±?1.48. The pharmacokinetic study of the optimized in situ gel revealed a significant increase in the peak plasma concentration, area under plasma concentration versus time curve and absolute bioavailability compared to that of the oral suspension of Valdoxan® with the values of 247?±?64.40?ng/mL, 6677.41?±?1996?ng.min/mL, and 37.89%, respectively. It also gave drug targeting efficiency index of 141.42 which revealed more successful brain targeting by the intranasal route compared to the intravenous route and it had direct transport percent index of 29.29 which indicated a significant contribution of the direct nose to brain pathway in the brain drug delivery.