Ritonavir-PEG 8000 amorphous solid dispersions: in vitro and in vivo evaluations

Ritonavir is a large, lipophilic molecule that is practically insoluble in aqueous media and exhibits an exceedingly slow intrinsic dissolution rate. Although it has favorable lipophilicity, in vitro permeability studies have shown that ritonavir is a substrate of P-glycoprotein. Thus, the oral absorption of ritonavir could be limited by both dissolution and permeability, thereby making it a Class IV compound in the Biopharmaceutics Classification System. Because formulations rarely exert direct influence on local intestinal permeability, the effect of enhanced dissolution rate on oral absorption was explored. More specifically, poly(ethylene glycol) (PEG)-amorphous ritonavir solid dispersions were prepared with different drug loadings, and the in vitro and in vivo performances of the dispersions were evaluated. In vitro dissolution was conducted in 0.1N HCl with a USP Apparatus I. A crossover design was used to evaluate the oral bioavailability of amorphous dispersions relative to crystalline drug in beagle dogs. Intrinsic dissolution measurements of the two solid phases indicated a 10-fold improvement in intrinsic dissolution rate for amorphous ritonavir compared with the crystalline counterpart. In vitro dissolution of ritonavir depended on the solid phase as well as drug loading of the dispersion. In vivo study results indicate that amorphous solid dispersions containing 10-30% drug exhibited significant increases in area under the curve of concentration versus time (AUC) and maximum concentration (C(max)) over crystalline drug. For example, 10% amorphous dispersion exhibited increases of 22- and 13.7-fold in AUC and C(max), respectively. However, both in vitro dissolution and bioavailability decreased with increasing drug load, which led to the construction of a multiple Level C in vitro-in vivo relationship for this Class IV compound. The established relationship between in vitro dissolution and in vivo absorption can help guide formulation development.     

Physicochemical characterization and dissolution study of solid dispersions of Lovastatin with polyethylene glycol 4000 and polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Enhancing the bioavailability of ABT-963 using solid dispersion containing Pluronic F-68

Solid dispersions using Pluronic F-68 as a carrier were studied for improving the dissolution and bioavailability of ABT-963, a poorly water-soluble compound. The solid dispersions were prepared either by evaporation of the ethanol solutions containing ABT-963 and Pluronic, or by cooling the hot melt of the drug in the carrier. The dispersions were characterized using differential scanning calorimetry, powder X-ray diffractometry, scanning electron microscopy, elemental mapping, and by constructing the melting point phase diagram. In vitro dissolution and in vivo oral bioavailability in fasted dogs were compared for the solid dispersion and a conventional IR capsule formulation. Results showed that, at a composition of approximately 7.5%, ABT-963 formed a eutectic mixture with Pluronic F-68. Both the drug and the polymer were crystalline in the solid dispersion with a wide range of composition of each component. The solid dispersion substantially increased the in vitro dissolution rate of ABT-963. Dosing of the dispersion to fasted dogs resulted in a significant increase of oral bioavailability compared with the conventional IR capsule formulation. These results show that solid dispersion is a promising approach for developing ABT-963 drug products.     

Preparation,characterization, and in vitro/vivo evaluation of polymer-assisting formulation of atorvastatin calcium based on solid dispersion technique

 Due to low solubility and bioavailability, atorvastatin calcium is confronted with challenge in conceiving appropriate formulation. Solid dispersion of atorvastatin calcium was prepared through the solvent evaporation method, with Poloxamer 188 as hydrophilic carriers. This formulation was then characterized by scanning electron microscopy, differential scanning calorimetry,powder X-ray diffraction and fourier transform infrared spectroscopy. Moreover, all these studies suggested the conversion of crystalline atorvastatin calcium. In addition, the drug solubility studies as well as dissolution rates compared with bulk drug and market tablets Lipitor were also examined. Furthermore, the study investigated the pharmacokinetics after oral administration of Lipitor and solid dispersion. And the AUC0–8 h and Cmax increased after taking ATC-P188 solid dispersion orally compared with that of Lipitor. All these could be demonstrated that ATC-P188 solid dispersions would be prospective means for enhancing higher oral bioavailability of ATC.     

Preparation, characterization and in vitro dissolution studies of solid dispersion of meloxicam with PEG 6000

The poor solubility and wettability of meloxicam leads to poor dissolution and hence showing variations in bioavailability. The present study is aimed to increase solubility and dissolution of the drug using solid dispersion techniques. The solid binary systems were prepared at various drug concentrations (5-40%) with polyethylene glycol 6000 by different techniques (physical mixing, solvent evaporation). The formulations were characterized by solubility studies, differential scanning calorimetry, fourier transform infrared spectroscopy and in vitro dissolution rate studies. The solubility of drug increased linearly with increase in polymer concentration showing A(L) type solubility diagrams. Infrared spectroscopy studies indicated the possibility of hydrogen bonding with polymer. The differential scanning calorimetry and powder X ray diffraction demonstrated the presence of polymer as eutectica or monotectica in solid dispersion along with the physical characteristics of the drug (crystalline, amorphous or a mixture of both). The solid dispersions of the drug demonstrated higher drug dissolution rates than physical mixtures and pure meloxicam, as a result of increased wettability and dispersibility of drug in a solid dispersion system.     

The characterization and dissolution performances of spray dried solid dispersion of ketoprofen in hydrophilic carriers

Solid dispersion is one of the most promising strategies to improve oral bioavailability of poorly soluble API. However, there are inconsistent dissolution performances of solid dispersion reported which entails further investigation. In this study, solid dispersions of ketoprofen in three hydrophilic carriers, i.e. PVP K30, PVPVA 6:4 and PVA were prepared and characterized. Physical characterization of the physical mixture of ketoprofen and carriers shows certain extent of amorphization of the API. This result is coinciding to evaluation of drug–polymer interaction using ATR-FTIR whereby higher amorphization was seen in samples with higher drug–polymer interaction. XRPD scanning confirms that fully amorphous solid dispersion was obtained for SD KTP PVP K30 and PVPVA system whereas partially crystalline system was obtained for SD KTP PVA. Interestingly, dissolution profiles of the solid dispersion had shown that degree of amorphization of KTP was not directly proportional to the dissolution rate enhancement of the solid dispersion system. Thus, it is concluded that complete amorphization does not guarantee dissolution enhancement of an amorphous solid dispersion system.     

Cefuroxime axetil solid dispersion with polyglycolized glycerides for improved stability and bioavailability

Objectives Cefuroxime axetil (CA), a poorly soluble, broad spectrum cephalosporin ester prodrug, is hydrolysed by intestinal esterase prior to absorption, leading to poor and variable bioavailability. The objective was therefore to formulate a stable amorphous solid dispersion of the drug with enhanced solubility and stability against enzymatic degradation. Methods Spray drying was used to obtain a solid dispersion of CA with Gelucire 50/13 and Aerosil 200 (SDCAGA), and a solid dispersion of CA with polyvinyl pyrrolidone (SDCAP); amorphous CA (ACA) was obtained by spray drying CA alone. The formulations were characterized by differential scanning calorimetry, X‐ray powder diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy studies, and compared for solubility, dissolution and bioavailability in rats. Key findings SDCAP and SDCAGA showed improved solubility and dissolution profiles owing to amorphization and formation of solid dispersions with hydrophilic carriers. The improved stability of amorphous CA in solid dispersions compared to ACA alone was attributed to hydrogen bonding interactions involving the amide of CA with the carbonyl of polyvinyl pyrrolidone in SDCAP, whereas in SDCAGA the interactions were at multiple sites involving the amide and carbonyl of CA with the carbonyl and hydroxyl of Gelucire 50/13. However, SDCAGA showed superior bioavailability compared to SDCAP, ACA and CA. Conclusions Improvement in physical stability of solid dispersions was attributed to hydrogen bonding, while improvement in bioavailability of SDCAGA compared to SDCAP, in spite of comparable solubility and dissolution profile, may be attributed to Gelucire, which utilizes intestinal esterase for lipolysis, protecting the prodrug from enzymatic degradation to its non‐absorbable base form.     

Physicochemical Characterization and Dissolution Study of Solid Dispersions of Lovastatin with Polyethylene Glycol 4000 and Polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to‐carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile of Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Physicochemical characterization and in vivo evaluation of flurbiprofen-loaded solid dispersion without crystalline change

To develop a novel flurbiprofen-loaded solid dispersion without crystalline change, various flurbiprofen-loaded solid dispersions were prepared with water, sodium carboxylmethyl cellulose (Na-CMC), and Tween 80. The effect of Na-CMC and Tween 80 on aqueous solubility of flurbiprofen was investigated. The physicochemical properties of solid dispersions were investigated using SEM, DSC, and X-ray diffraction. The dissolution and bioavailability in rats were evaluated compared to commercial product. Unlike conventional solid dispersion systems, the flurbiprofen-loaded solid dispersion gave a relatively rough surface and changed no crystalline form of drug. These solid dispersions were formed by attaching hydrophilic carriers to the surface of drug without crystal change, resulting in changing the hydrophobic drug to hydrophilic form. Furthermore, the flurbiprofen-loaded solid dispersion at the weight ratio of flurbiprofen/Na-CMC/Tween 80 of 6/2.5/0.5 improved ～ 60-fold drug solubility. It gave higher AUC, T_max, and C_max compared to commercial product. The solid dispersion improved almost 1.5-fold bioavailability of drug compared to commercial product in rats. Thus, the flurbiprofen-loaded solid dispersion would be useful to deliver poorly water-soluble flurbiprofen with enhanced bioavailability without crystalline change.     

Enhancement of dissolution rate of class II drugs (Hydrochlorothiazide); a comparative study of the two novel approaches; solid dispersion and liqui-solid techniques

Liqui-solid technique and solid dispersion formation are two novel approaches for enhancement of dissolution rate of BCS class II drugs. Liqui-solid compact converts a liquid drug or drug solution into a free flowing powder with enhanced dissolution rate. In case of solid dispersion drug is molecularly dispersed in a hydrophilic polymer in solid state. In the present study, Liqui-solid and solid dispersion techniques were applied to enhance the dissolution of the Hydrochlorothiazide. Three formulations of Hydrochlorothiazide were prepared by liqui-solid technique using micro crystalline cellulose as carrier material and colloidal silicon dioxide as coating material. Water, poly ethylene glycol-400 and Tween-60 were used as solvent system. Solid dispersions of Hydrochlorothiazide were prepared by solvent fusion method using PEG-4000 as carrier polymer. Tablets were subjected to evaluation of various physical and chemical characteristics. Dissolution profiles of tablets prepared by the novel techniques were compared with marketed conventional tablets. Model independent techniques including similarity factor, dissimilarity factor and dissolution efficiency were applied for comparison of dissolution profiles. The results obtained indicated that liqui-solid compact formulations were more effective in enhancing the dissolution rate compared with solid dispersion technique. The liqui-solid compacts improved the dissolution rate up to 95% while the solid dispersion increased it to 88%.     

Preparation and physicochemical characterizations of tanshinone IIA solid dispersion

This investigation describes a novel approach to prepare solid dispersions of tanshinone IIA using a laboratory-scale planetary ball mill. Poloxamer 188 was employed as the surfactant carrier to improve the solubility and dissolution of the poorly soluble drug, tanshinone IIA. Solubility and dissolution were evaluated compared to the corresponding physical mixtures and pure drug. Furthermore, the physicochemical properties of the solid dispersions were investigated using scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry, Fourier transform infrared spectroscopy and ultraviolet spectrophotometry. The solid dispersion significantly enhanced drug solubility and dissolution compared with pure drug and the physical mixtures. Scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry and Fourier transform infrared spectroscopy analyses of tanshinone IIA/poloxamer 188 system confirmed that there were intermolecular interactions between tanshinone IIA and poloxamer 188 and no conversion to crystalline material. Tanshinone IIA existed in a microcrystalline form in the system. These results suggested that improvement of the dissolution rate could be correlated to the formation of a eutectic mixture between the drug and the carrier. After 60 days the solid dispersion samples were chemically and physically stable. The present studies indicated that the planetary ball mill technique could be considered as a novel and efficient method to prepare solid dispersion formulations.     

布格呋喃固体分散体的体外研究

布格呋喃(buagafuran,AF-5)是以( )香芹酮为起始原料通过立体选择性合成的沉香呋喃类化合物[1].它具有显著的抗焦虑作用,毒副作用低,市场前景广阔.布格呋喃为油状液体,脂溶性强,不溶于水.用植物油稀释进行小鼠灌胃,抗焦虑活性与空白组比较无统计学意义,不能较好地发挥药效.室温放置易发生降解,化学稳定性差.这些缺     

Effects of solid carriers on the crystalline properties, dissolution and bioavailability of flurbiprofen in solid self-nanoemulsifying drug delivery system (solid SNEDDS)

In order to investigate the effects of solid carriers on the crystalline properties, dissolution and bioavailability of flurbiprofen in a solid self-nanoemulsifying drug delivery system (solid SNEDDS), different solid SNEDDS formulations were prepared by spray-drying the solutions containing liquid SNEDDS and various carriers. The liquid SNEDDS, composed of Labrafil M 1944 CS/Labrasol/Trasncutol HP (12.5/80/7.5%) with 2% w/v flurbiprofen, gave a z-average diameter of about 100 nm. Silicon dioxide, a hydrophobic solid carrier, produced an excellent conventional solid SNEDDS with a nanoemulsion droplet size of less than 100 nm, similar to the liquid SNEDDS and smaller than the other solid SNEDDS formulations. The drug was in an amorphous state in this solid SNEDDS. Furthermore, it greatly improved the dissolution rate and oral bioavailability of flurbiprofen in rats because it allowed the spontaneous formation of an interface between the oil droplets and the water. Magnesium stearate, a hydrophobic carrier, produced a solid SNEDDS with the largest diameter. However, it greatly enhanced the dissolution rate and oral bioavailability due to the formation of a simple eutectic mixture. The hydrophilic carriers such as polyvinyl alcohol (PVA), sodium carboxymethyl cellulose (Na-CMC) and hydroxypropyl-β-cyclodextrantrin (HP-β-CD) did not form a solid SNEDDS but rather a solid dispersion (or microcapsule). HP-β-CD improved the dissolution rate but did not improve the oral bioavailability as much as the hydrophobic polymers. PVA and Na-CMC hardly improved the dissolution rate but maintained constantly high plasma levels in rats for a long period. Thus, the selection of carrier is an important factor in the development of solid SNEDDS, since the carriers had significant effects on the crystalline properties, dissolution and oral bioavailability of flurbiprofen and on the formation of solid SNEDDS.     

他克莫司固体分散体的制备及体外溶出度测定

目的:制备他克莫司固体分散体,提高他克莫司的体外溶出度。方法:以体外溶出度为指标,从泊洛沙姆188(Poloxamer188)、聚维酮K30(PVP K30)、羟丙甲纤维素(HPMCE3)、聚乙二醇6000(PEG6000)中筛选最优载体及其比例。并采用差示热量扫描(DSC)、红外光谱(FTIR)、电子扫描电镜(SEM)等进行物相表征。结果:4种不同载体制成的固体分散体均能增加他克莫司体外溶出度,通过比较优选出HPMCE3为最佳载体。物相鉴定表明,他克莫司大部分以无定型状态分散于HPMCE3中。结论:制备他克莫司-HPMCE3固体分散体可以明显提高其体外溶出度,且制备方法简单可行。     

酮洛芬-聚乙烯吡咯烷酮固体分散物的制备及其体外溶出度的研究

目的提高难溶性药物酮洛芬体外溶出速度。方法以聚乙烯吡咯烷酮(PVPK30)为载体,制备药物与载体不同比例的固体分散物及物理混合物,采用X射线衍射和红外吸收方法,比较二者及药物的结晶形态,并进行体外药物溶出度的测定。结果固体分散物体外溶出速率明显高于物理混合物及酮洛芬原料的体外溶出速度,且随载体比例增加而增大。固体分散物的X射线衍射及红外吸收图谱确定了酮洛芬以无定形态分散在载体中,放置6个月后,固体分散物X射线衍射图谱没有明显变化。结论药物与载体以合适比例制备的固体分散物可以明显提高药物体外溶出速度。     

The use of three different solid dispersion formulations--melt extrusion, film-coated beads, and a glass thermoplastic system--to improve the bioavailability of a novel microsomal triglyceride transfer protein inhibitor

A bioavailable formulation for a water-insoluble microsomal triglyceride transfer protein inhibitor, R103757, was developed using solid dispersion technology. The need for an advanced formulation was tested in the dog by assessing the oral bioavailability of three generic concepts: a tablet (crystalline drug), a capsule (film-coated beads), and an oral solution. These screening studies steered further development in the direction of a solid dispersion. Three solid dispersion platforms were assessed: melt extrusion, film-coated beads, and a glass thermoplastic system. Thermal and spectrophotometric analysis revealed that no crystalline drug was present in any of the formulations. The dissolution profiles of the three dispersion systems showed that release was improved compared with the unmanipulated drug. In addition, stability studies confirmed the physical and chemical integrity of the formulation. A human clinical trial was performed to assess the pharmacokinetics of the three amorphous dispersions. Plasma levels were obtained after single oral administration in both the fasting and fed state. The study indicated that all three approaches improved the bioavailability of R103757 with the glass thermoplastic system providing the best performance. These studies point to the potential usefulness of solid dispersion approaches and expand the possible number of ways to implement these methodologies.     

Dissolution, stability, and absorption characteristics of dicumarol in polyethylene glycol 4000 solid dispersions

The dissolution characteristics of dicumarol were markedly enhanced by preparing dispersions of drug in polyethylene glycol 4000. Solid dispersions of varying weight fractions were formed by a melt method without measurable drug degradation or evaporation. There were no significant differences in dissolution rates among weight fractions, with dynamic solubilities being approximately 2.5 times greater than dicumarol's equilibrium solubility. No indications of drug polymer complexation were noted from equilibrium or in situ absorption experiments. Incorporation of solid dispersions into direct compression tablets provided dosage forms with fast-release properties relative to test tablets of physical mixtures and a commercially available product. Percentages dissolved in 30 min were 370% greater for 1:3 and 1:5 (w/w) solid dispersion tablets compared to a commercial tablet at 37 degrees with a pH 7.5 dissolution buffer. X-ray diffraction of test powder revealed that the crystalline nature of the drug had altered during fusion preparation. Dissolution traits and drug stability for solid dispersions were maintained over 1 year of storage.     

Physicochemical characterization and in vitro dissolution studies of solid dispersions of ketoprofen with PVP K30 and d-mannitol

Aim of the present study was to improve the solubility and dissolution rate of poorly water soluble, BCS class-II drug Ketoprofen (KETO) by solid-dispersion approach. Solid dispersions were prepared by using polyvinylpyrrolidone K30 (PVP K30) and d-mannitol in different drugs to carrier ratios. Dispersions with PVP K30 were prepared by kneading and solvent evaporation techniques, whereas solid dispersions containing d-mannitol were prepared by kneading and melting techniques. These formulations were characterized in the liquid state by phase-solubility studies and in the solid state by Differential Scanning Calorimetry (DSC), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The aqueous solubility of KETO was favored by the presence of both carriers. The negative values of Gibbs free energy illustrate the spontaneous transfer from pure water to the aqueous polymer environment. Solid state characterization indicated KETO was present as fine particles in d-mannitol solid dispersions and entrapped in carrier matrix of PVP K30 solid dispersions. In contrast to the very slow dissolution rate of pure KETO, dispersions of drug in carriers considerably improved the dissolution rate. This can be attributed to increased wettability and dispersibility, as well as decreased crystallinity and increase in amorphous fraction of drug. Solid dispersions prepared with PVP K30 showed the highest improvement in dissolution rate of KETO. Even physical mixtures of KETO prepared with both carriers also showed better dissolution profiles than those of pure KETO.     

Properties of solid dispersions of piroxicam in polyvinylpyrrolidone.

Solid dispersions of piroxicam were prepared with polyvinylpyrrolidone (PVP) K-17 PF and PVP K-90 by solvent method. The physical state and drug:PVP interaction of solid dispersions and physical mixtures were characterized by X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). FTIR analysis demonstrated the presence of intermolecular hydrogen bonding between piroxicam and PVP in solid dispersions. These interactions reflected the changes in crystalline structures of piroxicam. The amorphousness within the PVP moeity might be predicted in piroxicam dispersions by the disappearance of N-H or O-H peak of piroxicam. Dissolution studies indicated a significant increase in dissolution of piroxicam when dispersed in PVP. The better results were obtained with the lower molecular weight PVP K-17 than with higher molecular weight PVP K-90. The non-amorphous solid dispersions in PVP K-17 showed almost equally fast dissolution rates to amorphous dispersions in PVP K-90. The mechanism of dissolution of solid dispersion in PVP K-90 is predominantly diffusion-controlled due to the very high viscosity of PVP K-90. Dissolution was maximum with the amorphous solid dispersions containing drug:PVP K-17 1:5 and 1:6 which showed a 40-fold increase in dissolution in 5 min as compared with pure drug. Copyright     

环孢素-泊洛沙姆188固体分散体的体外评价

目的以泊洛沙姆188（F68）为载体制备环孢素（CsA）固体分散体并考察其体外溶出。方法以溶剂一熔融法制备固体分散体，以差示扫描量热法（DSC）和X．射线衍射法鉴定CsA在体系中的存在状态，以FTIR表征药物与载体的相互作用，以摇瓶法测定CsA的溶解度，按《中国药典》溶出度第三法测定CsA从物理混合物和固体分散体中的溶出。结果X-射线衍射图谱显示CsA结晶衍射峰消失，提示药物以无定形或分子状态存在于固体分散体中。FTIR结果表明药物与载体间无相互作用。药物溶解度和溶出度均随着F68比例的增加而增大，固体分散体和物理混合物60min的累积溶出百分率分别为99．32％和75．41％，两者具显著性差异（P〈0．01）。结论F68能提高CsA的溶解度和溶出度，可用来制备CsA的固体剂型。