Fatigue performance of angle-stable tibial nail interlocking screws

Purpose

Tibial nail interlocking screw failure often occurs during delayed fracture consolidation or at early weight bearing of nailed unstable fractures, in general when high implant stress could not be reduced by other means. Is there a biomechanical improvement in long-term performance of angle stable locking screws compared to conventional locking screws for distal locking of intramedullary tibial nails?

Methods

Surrogate bones of human tibiae were cut in the distal third and distal locking of the 10 mm intramedullary tibial nail was performed with either two angle stable locking screws or two conventional locking screws in the mediolateral plane. Six specimens per group were mechanically tested under quasi-static and cyclic axial loading with constantly increasing force.

Results

Angle stable locking screw constructs exhibited significantly higher stiffness values (7,809 N/mm ± 647, mean ± SD) than conventional locking screw constructs (6,614 N/mm ± 859, p = 0.025). Angle stable locking screw constructs provided a longer fatigue life, expressed in a significantly higher number of cycles to failure (187,200 ± 18,100) compared to conventional locking screw constructs (128,700 ± 7,000, p = 0.004).

Conclusion

Fatigue performance of locking screws can be ameliorated by the use of angle stable locking screws, being especially important if the nail acts as load carrier and an improved stability during fracture healing is needed.     

Comparison of the efficacy of a distal clavicular locking plate versus a clavicular hook plate in the treatment of unstable distal clavicle fractures and a systematic literature review

Purpose

The purpose of this study was to retrospectively compare and review the clinical outcomes between the distal clavicular locking plate and clavicular hook plates in the treatment of unstable distal clavicle fractures; moreover, the relevant literature of the two fixation methods was reviewed systematically to identify the non-union, complications, or functional scores, according to the treatment methods and determine which treatment method is better.

Methods

Sixty-six patients with 66 unstable distal clavicle fractures who underwent open reduction and internal fixation with either a distal clavicular locking plate (36 patients) or a clavicular hook plate (30 patients ) were evaluated. The main outcome comparisons included Constant score, rate of non-union, rate of complication, and rate of returning to work three months postoperatively.

Results

No significant difference was found between locking plate and hook plate groups in union rate and Constant score (P > 0.05). However, the results indicated that the distal clavicular locking plate group had a significantly lower rate of complications (P < 0.05) and symptomatic hardware (P < 0.05). In addition, the distal clavicular locking plate facilitated the return to work better than the clavicular hook plate (P < 0.05).

Conclusions

Both distal clavicular locking plate and clavicular hook plate achieved good results in the treatment of unstable distal clavicle fractures; however, internal fixation with a distal clavicular locking plate had greater ability to return to their previous work after surgery in three months and fewer complications than the clavicular hook plate.     

Distal tibia fractures and medial plating: factors influencing re-operation

Purpose

We compared types of complications leading to re-operations in open and closed distal tibia fractures treated by locking or nonlocking medial plates.

Methods

Ninety-three patients from 2002 to 2012 who underwent open reduction and internal fixation (ORIF) and medial plating for distal extra-articular or partial articular tibia fractures were identified. Charts were retrospectively reviewed to determine the incidence of re-operation based on the type of complication that developed. Fisher’s exact and chi-square tests were performed to analyze the incidence of complications based on injury and type of plate used.

Results

Thirty-three (35.5 %) patients required re-operations: 28.6 % (n = 16) with closed injuries had complications leading to re-operations compared with 45.9 % (n = 17) of patients with open injuries (p = 0.12). Patients with closed injuries were more likely to require re-operation due to hardware pain/prominence (p = 0.03), whereas patients with open injuries were more likely to require re-operation due to nonunion (p = 0.04). There were no significant differences in infection (p = 0.66) or malunion (p = 0.99) between groups. Locking plates showed higher costs but were not associated with decreased risk of re-operation.

Conclusions

There was a high re-operation rate associated with distal tibia medial plating, with significant differences in the reason for re-operation between open versus closed groups. Complication rates were not influenced by the use of locking plates. Results of this study suggest that methods be considered to reduce re-operation based on type of fracture, such as early bone grafting or the use of alternate implants for open fractures.     

Proximal femoral nails compared with reverse distal femoral locking plates in intertrochanteric fractures with a compromised lateral wall; a randomised controlled trial

Purpose

There is no consensus about the best option of internal fixation for unstable intertrochanteric fractures. The aim of the present study was to compare proximal femoral nail (PFN) with contralateral reverse distal femoral locking compression plate (reverse-DFLCP) in the management of unstable intertrochanteric fractures with compromised lateral wall.

Method

In a randomized controlled study, from November 2011 to October 2012, 40 patients with unstable intertrochanteric fractures with compromised lateral wall (AO 31A 2.2 to 3.3) had osteosynthesis by PFN (n = 20) or reverse-DFLCP (n = 20). Intra-operative variables compared were duration of surgery, blood loss during surgery, fluoroscopy time and surgeons perception of the surgery. Patients were followed up clinically for a minimum of one year. Functional outcome was assessed by Parker Palmer mobility score (PPMS), Harris hip score (HHS), and Short Form-12. Failure was defined as any condition which would necessitate revision surgery with change of implant.

Results

Duration of surgery (p = 0.022), blood loss during surgery (p = 0.008) and fluoroscopy time (p = 0.0001) were significantly less in the PFN group than in the reverse-DFLCP group. No significant difference was found in type of reduction, difficulty in reduction and surgeon’s perception of surgery. The PFN group had better functional outcome than the reverse-DFLCP group. HHS for the PFN group was 81.53 ± 13.21 and for the reverse-DFLCP group it was 68.43 ± 14.36 (p = 0.018). SF-12 physical (p = 0.002) and mental component (p = 0.007) scores in the PFN group was significantly better than in the reverse-DFLCP group. There was one failure in the PFN group as compared to six in the reverse-DFLCP group (p = 0.036).

Conclusion

Due to favourable intra-operative variables, better functional outcome and lower failure rates, we conclude that PFN is a better implant than reverse-DFLCP for intertrochanteric fractures with compromised lateral wall.Keyword: Unstable intertrochanteric fractures, Lateral wall, Proximal femoral nail, Reverse distal femoral locking compression plate     

Intramedullary repair device against volar plating in the reconstruction of extra-articular and simple articular distal radius fractures; a randomized pilot study

Purpose

This prospective randomized pilot study reports our institutional experience and early results using Sonoma Wrx (Sonoma Orthopedic Products, Santa Rosa, CA) in the treatment of extra-articular and simple intra-articular distal radius fractures.

Material and methods

A total of 64 patients, were enrolled in the study. They were considered eligible if they had; unstable extra-articular distal radius fractures and simple intra-articular distal radius fractures suitable for closed reduction (AO types; A2.2, A2.3, A3.1 C2.1, C2.2). Patients in group I received intramedullary fixation using the Sonoma Wrx® device and patients in group II received standard volar locking plate fixation. Radiographic criteria of acceptable healing were used for evaluation.

Results

Two groups were similar in terms of baseline characteristics. Mean time of operation was significantly shorter in Group 1 vs. in group 2 (36.81 ± 7.11 vs. 48.97 ± 5.9 minutes, p = 0.001). Time to healing of the fracture was not different between two groups (5.45 ± 1.09 vs. 5.70 ± 1.04 weeks for Group 1 vs. 2, respectively p = 0.36). Overall complications occurred in 9 patients in group 1 and in 15 patients in group 2 (p = 0.17). Follow-up was completed in all patients with a median time of 12 months and 13 months in group 1 and 2, respectively. On radiographic evaluation radial inclination, radial height and volar tilt were not significantly different between group 1 and 2, respectively. There were no significant differences between two groups in regard to wrist rotational degrees measured in last follow-up visit.

Conclusion

Sonoma Wrx Device is reliable and effective in terms of achieving satisfactory outcomes in treatment of distal radius fractures. It may be reasonable to use this device to prevent complications that are related to extensive soft tissue dissection.     

Locking plate osteosynthesis of clavicle fractures: complication and reoperation rates in one hundred and five consecutive cases

Purpose

Locking plate osteosynthesis has become the preferred method for operative treatment of clavicle fractures. The method offers stable fixation, and would theoretically be associated with a low rate of fracture-related complications and reoperations. However, this remains to be explored in a large cohort, and our purpose was to assess the overall rates of complications and reoperations following locking plate osteosynthesis of mid-shaft clavicle fractures.

Methods

We identified all locking plate osteosynthesis of mid-shaft clavicle fractures operated upon in our department from January 2008 to November 2010 (n = 114). Nine patients did not attend the follow-up at our institution. The study group of 105 fractures (104 patients, 86 males) had a median age of 36 years (14–75 years). Follow-up ranged from 0.5 to 3.5 years. No patients were allowed to load the upper extremity for six weeks. By studying patient files and radiographic material, we assessed complications and reoperations.

Results

Overall, there were 31 cases (30 %) of plate removals for discomfort. There were five cases (5 %) of failure of osteosynthesis: two occurred early after approximately six weeks and three late after ten to 13 months postoperatively.

Conclusion

The overall rate of failure of osteosynthesis is low (5 %). The burden of plate removals in approximately one third of patients should be included in the preoperative information.     

Critical analysis of tibial fracture healing following unreamed nailing

Purpose

Unreamed nails have revolutionised the treatment of tibial shaft fractures. Many authors, however, have reported increasing bone healing complications with these implants. Unfortunately, few studies have addressed the factors affecting bone healing after unreamed tibial nailing.

Methods

One-hundred and sixty tibial fractures in 158 patients (mean age 39.5 years) fixed using unreamed nails were reviewed. There were 78 AO type-A, 65 type-B and 17 type-C fractures (115 closed and 45 open fractures). Twelve patient, injury and surgery variables were analysed for their influence on fracture healing.

Results

Union occurred in all fractures after a mean time of 24.3 weeks. Additional surgery to achieve union, apart from dynamisation, was done in nine (6%) cases. The most important variables affecting healing were the mechanism of trauma (p = 0.005), fracture site gap (p = 0.01), degree of comminution (p = 0.0003), associated soft tissue injuries (p = 0.02) and the time to dynamisation (p = 0.0001).

Conclusions

High-energy trauma and fracture comminution have a negative impact on bone union and require close follow-up. It is essential to avoid distraction over three millimetres with unreamed nailing. Dynamisation is advised within ten weeks in axially stable fractures to encourage bone healing and avoid failure of the locking screws.     

Intramedullary fixation of distal fibular fractures: a systematic review of clinical and functional outcomes

Background

Ankle fractures are extremely common and represent nearly one quarter of all lower-limb fractures. In the majority of patients, fractures involve the distal fibula. The current standard in treating unstable fractures is through open reduction and internal fixation (ORIF) with plates and screws. Due to concerns with potentially devastating wound complications, minimally invasive strategies such as intramedullary fixation have been introduced. This systematic review was performed to evaluate the clinical and functional outcomes of intramedullary fixation of distal fibular fractures using either compression screws or nails.

Materials and methods

Numerous databases (MEDLINE, PubMed, Embase, Google Scholar) were searched, 17 studies consisting of 1,008 patients with distal fibular fractures treated with intramedullary fixation were found.

Results

Mean rate of union was 98.5 %, with functional outcome reported as being good or excellent in up to 91.3 % of patients. Regarding unlocked intramedullary nailing, the mean rate of union was 100 %, with up to 92 % of patients reporting good or excellent functional outcomes. Considering locked intramedullary nailing, the mean rate of union was 98 %, with the majority of patients reporting good or excellent functional outcomes. The mean complication rate across studies was 10.3 %, with issues such as implant-related problems requiring metalwork removal, fibular shortening and metalwork failure predominating.

Conclusion

Overall, intramedullary fixation of unstable distal fibular fractures can give excellent results that are comparable with modern plating techniques. However, as yet, there is unconvincing evidence that it is superior to standard techniques with regards to clinical and functional outcome.

Level of evidence

Level IV evidence.     

Intramedullary fixation of forearm fractures with new locked nail

Background:

Lack of availability of interlocked nails made plate osteosynthesis the first choice of treatment of forearm fractures inspite of more surgical exposure, periosteal stripping and big skin incision subsequent scar along with higher risk of refracture on implant removal. We hereby report the first 12 cases with 19 forearm bone fractures internally fixed by indegenous interlocked nail.

Materials and Methods:

Existing square nails were modified to have a broad proximal end of 5.5 mm with a hole for locking screw of 2.5 mm. The nail has a distal hole of 1/1.2/1.5 mm in 2.5/3/3.5 mm diameter nail, respectively. A new method of distal locking with a clip made of k wire is designed. The clip after insertion into the bone and hole in nail and opposite cortex snuggly fits the bone providing a secure locking system. Twelve skeletally mature patients, mean age 32 years (range 24-45 years) with 19 diaphyseal fractures of the forearm were treated with this indigenously made new nail. The patient were evaluated for fracture union, functional recovery and complications. The functional outcome was assessed by disabilities of arm, shoulder and hand questionnaire (DASH score).

Results:

Time to radiographic union ranged between 12 and 28 weeks, with a 100% union rate. Complications were minimal, with mild infection in open fracture (n=1) and delayed union (n=1) in patient with comminuted fracture of the ulna only. The clinical results were excellent. The DASH score ranged between 0 and 36 points.

Conclusion:

This new interlocking nail may be considered as an alternative to plate osteosynthesis for fractures of the forearm in adults. The advantages are benefit of closed reduction, smaller residual scar, reduced cost and early union with allowance of immediate movements.     

A comparative biomechanical study of proximal femoral nail (InterTAN) and proximal femoral nail antirotation for intertrochanteric fractures

Purpose

The purpose of this study was to compare the biomechanical strength of the cephalomedullary nail InterTAN in cases of intertrochanteric fractures with the commonly used PFNA.

Methods

Sixteen fresh specimens of the proximal femur were used as intertrochanteric fracture models and were fixed using two fixation devices: the new proximal femoral nail (InterTAN) and proximal femoral nail antirotation (PFNA). An intertrochanteric fracture was created in composite bone models. Each specimen was loaded to simulate single leg stance while stiffness, migration (cut out), compressive force across the fracture site, and distal fragment rotation were monitored. The different internal fixation methods were tested by an experimental press analysis.

Results

Results of tests for femoral strength, stiffness, stability, and bearing capacity demonstrated that the biomechanical function of InterTAN was better than that of PFNA (P < 0.05). Compared with the PFNA nail, InterTAN showed increased strength, stiffness, and resistance torque of 30 %, 15 %, and 27 %, respectively.

Conclusion

Comparison of the treatment of intertrochanteric fractures with InterTAN and PFNA internal fixation showed that the InterTAN yielded improvement relative to the PFNA. InterTAN has a firmer and biomechanically superior performance and is therefore an ideal internal fixation method for treating intertrochanteric fractures. Additional research in osteopenic bone is necessary to comprehensively characterize the effects of the design enhancements of these two implants.     

Fibular fixation as an adjuvant to tibial intramedullary nailing in the treatment of combined distal third tibia and fibula fractures: a biomechanical investigation

Objective

Distal third tibia fractures have classically been treated with standard plating, but intramedullary (IM) nailing has gained popularity. Owing to the lack of interference fit of the nail in the metaphyseal bone of the distal tibia, it may be beneficial to add rigid plating of the fibula to augment the overall stability of fracture fixation in this area. This study sought to assess the biomechanical effect of adding a fibular plate to standard IM nailing in the treatment of distal third tibia and fibula fractures.

Methods

Eight cadaveric tibia specimens were used. Tibial fixation consisted of a solid titanium nail locked with 3 screws distally and 2 proximally, and fibular fixation consisted of a 3.5 mm low-contact dynamic compression plate. A section of tibia and fibula was removed. Testing was accomplished with an MTS machine. Each leg was tested 3 times; with and without a fibular plate and with a repetition of the initial test condition. Vertical displacements were tested with an axial load up to 500 N, and angular rotation was tested with torques up to 5 N•m.

Results

The difference in axial rotation was the only statistically significant finding (p = 0.003), with fibular fixation resulting in 1.1° less rotation through the osteotomy site (17.96° v. 19.10°). Over 35% of this rotational displacement occurred at the nail–locking bolt interface with the application of small torsional forces.

Conclusion

Fibular plating in addition to tibial IM fixation of distal third tibia and fibula fractures leads to slightly increased resistance to torsional forces. This small improvement may not be clinically relevant.     

Precise nail tip positioning after tibial intramedullary nailing prevents anterior knee pain

Purpose

Anterior knee pain (AKP) is a common complication following intramedullary nailing of tibial shaft fractures. Our aim was, by analysing the postoperative lateral knee X-rays and clinical status (VAS score), to find the best intramedullary tip position of a non protruded nail that will provide the best postoperative outcome avoiding AKP.

Methods

We evaluated the postoperative outcome of 221 patients, from the last four years, with healed fractures initially treated with intramedullary reamed nails with two or three interlocking screws proximally and distally through a medial paratendinous incision for nail entry portal. Our aim was to analyse a possible relationship between AKP according to the VAS scale, and nail position marked as a distance from tip of nail to tibial plateau (NP) and to tibial tuberosity (NT), measured postoperatively on lateral knee X-rays.

Results

Two groups of patients were formed on the basis of presence of pain related to AKP (the level of pain was neglected): group A were patients with pain and group B without pain. The difference between the two groups concerning NP and NT measurements appeared to be statistically significant concerning NT measurement (p < 0.05), with high accuracy according to the classification tree.

Conclusions

We presume that the position of the proximal tip of the nail and its negative influence on the innervation pattern of the area dorsal to patellar tendon could be the key factor of AKP. We conclude that the symptoms of AKP will not appear if the tip of the nail position is more than 5.5 mm from the tibial plateau (NP) and more than 2.5 mm from the tibial tuberosity (NT).     

Comparison of low, multidirectional locked nailing and plating in the treatment of distal tibial metadiaphyseal fractures

Purpose

The aim of this study was to compare the results of a new technique for low, multidirectional locked nailing with closed reduction and minimally invasive plating in the treatment of distal tibial metadiaphyseal fractures.

Methods

Forty-six matched patients were divided according to age, gender, Injury Severity Score, and fracture pattern into group A (expert tibial nailing) and group B (minimally invasive plating). Then, the patients were followed up, and the clinical and radiographic results were retrospectively analysed.

Results

The mean followed-up was 24.7 ± 2.7 months in group A and 25.8 ± 2.8 months in group B. No patient had nonunion, shortening, hardware breakdown, or deep-seated infection. Patients in group A had a significantly shorter mean operating time, hospital stay, full weight-bearing time and union time (76 ± 16.6 vs. 90 ± 20.3 minutes, p = 0.000; 5.8 ± 2.1 vs. 8.9 ± 3.1 days, p = 0.000; 9.0 ± 1.4 vs. 11.1 ± 1.7 weeks, p = 0.000; and 21.3 ± 3.5 vs. 23.1 ± 3.6 weeks, p = 0.047, respectively). Three patients in group A and one patient in group B presented with malalignment (p = 0.608). The mean Olerud-Molander Ankle score was 89.0 ± 7.1 in group A and 87.6 ± 8.4 in group B (p = 0.478).

Conclusions

Distal tibia metadiaphyseal fractures may be treated successfully with low, multidirectional locked nails or plates. However, low, multidirectional locked nailing may represent a superior surgical option, since it offers advantages in terms of mean operating time, hospital stay, full weight-bearing time and union time.     

Preoperative classification assessment reliability and influence on the length of intertrochanteric fracture operations

Purpose

The accuracy of intertrochanteric fracture classification is important; indeed, the patient outcomes are dependent on their classification. The aim of this study was to use the AO classification system to evaluate the variation in classification between X-ray and computed tomography (CT)/3D CT images. Then, differences in the length of surgery were evaluated based on two examinations.

Methods

Intertrochanteric fractures were reviewed and surgeons were interviewed. The rates of correct discrimination and misclassification (overestimates and underestimates) probabilities were determined. The impact of misclassification on length of surgery was also evaluated.

Results

In total, 370 patents and four surgeons were included in the study. All patients had X-ray images and 210 patients had CT/3D CT images. Of them, 214 and 156 patients were treated by intramedullary and extramedullary fixation systems, respectively. The mean length of surgery was 62.1 ± 17.7 min. The overall rate of correct discrimination was 83.8 % and in the classification of A1, A2 and A3 were 80.0, 85.7 and 82.4 %, respectively. The rate of misclassification showed no significant difference between stable and unstable fractures (21.3 vs 13.1 %, P = 0.173). The overall rates of overestimates and underestimates were significantly different (5 vs 11.25 %, P = 0.041). Subtracting the rate of overestimates from underestimates had a positive correlation with prolonged surgery and showed a significant difference with intramedullary fixation (P < 0.001).

Conclusions

Classification based on the AO system was good in terms of consistency. CT/3D CT examination was more reliable and more helpful for preoperative assessment, especially for performance of an intramedullary fixation.     

Biomechanical analysis of two fixation methods for proximal chevron osteotomy of the first metatarsal

Purpose

The proximal chevron osteotomy provides high correctional power. However, relatively high rates of dorsiflexion malunion of up to 17 % are reported for this procedure. This leads to insufficient weight bearing of the first ray and therefore to metatarsalgia. Recent biomechanical and clinical studies pointed out the importance of rigid fixation of proximal metatarsal osteotomies. Therefore, the aim of the present study was to compare biomechanical properties of fixation of proximal chevron osteotomies with variable locking plate and cancellous screw respectively.

Methods

Ten matched pairs of human fresh frozen cadaveric first metatarsals underwent proximal chevron osteotomy with either variable locking plate or cancellous screw fixation after obtaining bone mineral density. Biomechanical testing included repetitive plantar to dorsal loading from 0 to 31 N with the 858 Mini Bionix^® (MTS^® Systems Corporation, Eden Prairie, MN, USA). Dorsal angulation of the distal fragment was recorded.

Results

The variable locking plate construct reveals statistically superior results in terms of bending stiffness and dorsal angulation compared to the cancellous screw construct. There was a statistically significant correlation between bone mineral density and maximum tolerated load until construct failure occurred for the screw construct (r = 0.640, p = 0.406).

Conclusion

The results of the present study indicate that variable locking plate fixation shows superior biomechanical results to cancellous screw fixation for proximal chevron osteotomy. Additionally, screw construct failure was related to levels of low bone mineral density. Based on the results of the present study we recommend variable locking plate fixation for proximal chevron osteotomy, especially in osteoporotic bone.     

Implementing a clinical pathway for hip fractures; effects on hospital length of stay and complication rates in five hundred and twenty six patients

Purpose

Modern management of the elderly with a hip fracture is complex and costly. The aim of this study was to compare the treatment-related hospital length of stay (HLOS) before and after implementing a clinical pathway for patients undergoing hip fracture surgery.

Methods

This was a retrospective, before-and-after study. The first period ranged from June 21, 2008 to November 1, 2009 (N = 212), and the second was from January 7, 2010 to July 7, 2011 (N = 314). The electronic hospital system and patients records were reviewed for demographics, HLOS, mortality, complications and readmissions.

Results

In the first period 53 % had a femoral neck fracture, of which 57 % were treated with hemiarthroplasty. In the second period this was 46 % and 71 %. Pertrochanteric fractures were treated with a Gamma nail in 85 % in the first period, and in 92 % in the second period. The median HLOS decreased from nine to six days (p < 0.001). For the hemiarthroplasty group HLOS decreased from nine to seven days (p < 0.001); for internal fixation there was no significant difference (five versus six days, p = 0.557) and after Gamma nailing it decreased from ten to six days (p < 0.001). For mortality no statistically significant difference was found (6 % versus 5 %, p = 0.698). Complications decreased for the Gamma nail group (44 % versus 31 %, p = 0.049). Readmissions for the total group were not different (16 % versus 17 %, p = 0.720).

Conclusions

Implementing a clinical pathway for hip fractures is a safe way to reduce the HLOS and it improves the quality of care.     

Atypical femoral fractures after anti-osteoporotic medication: a Korean multicenter study

Purpose

Increasing numbers of atypical femoral fractures have been reported among long-term bisphosphonate users. We evaluated clinical characteristics of atypical femoral fractures throughout Korean multicenter studies.

Methods

We retrospectively analysed the bone mineral density, prodromal symptoms before femoral fracture, and medication history of osteoporosis in 76 cases of atypical femoral fracture.

Results

The mean age of cases was 71.4 ± 8.8 (range, 43–89) years old. The mean follow-up period after the fracture operation was 24.5 ± 12.9 (range, 12–79) months. BMI was 23.2 ± 3.0 on average. The mean BMD of femur was −1.9 ± 1.4 (range, −4.8 to 1.3). Prodromal symptoms including thigh pain before femoral fracture appeared in 22 (28.9 %) of 76 patients. All patients included in the study used bisphosphonate. The duration of taking bisphosphonate before fracture was 36.8 ± 50.8 (one–204 months) months. Fifty-seven (75 %) of 76 patients were taking the medication for more than three years. Delayed union occurred in 43 (56.5 %) of 76 patients. Delayed union was defined as a fractured bone that did not completely heal within six months of injury. The group of having taken anti-osteoporotic medication for more than three years showed relatively longer union period compared to that for a shorter period medication group (4.8 ± 2.5 months vs 9.3 ± 3.7 months, p = 0.017). The delayed union developed in 43 (56.5 %) of 76 patients and showed a significantly higher incidence in the group with long-term therapy (five/43 vs 38/43, p = 0.021). The bilateral femoral fractures developed in 23 (30.2 %) of 76 patients and showed a high incidence in the group medicated more than three years (two/23 vs 21/23, p = 0.039).

Conclusions

The longer bisphosphonates are used, the more the cases of delayed union and the more frequent the development of bilateral fractures following unilateral fractures. With regard to the delayed union, the methods of the acceleration of fracture healing may be beneficial in atypical femoral fracture patients who had been receiving long-term bisphosphonates therapy. Careful observation is required for contra-lateral femurs due to a high incidence of bilateral atypical femoral fractures.     

Benefits of early intramedullary nailing in femoral metastases

Purpose

Pathological fractures of the long bones are common complications of metastatic disease; however, the outcome of different surgical techniques for the treatment of these fractures has not been clearly defined. The aim of this study was to evaluate differences in prophylactic and therapeutic intramedullary nailing in femoral metastasic implants.

Methods

Sixty-five patients with metastasis of the femur were analysed retrospectively (37 females; 28 males) between 1995 and 2011 (follow-up 15 months). Forty-four presented with pathological fractures and 21 impending fractures (Mirel ≥7). The operative treatments used were intramedullary fixation with reamed long Gamma nails. The studied parameters were survival, radiological and analytical findings, and functional outcomes.

Results

Prophylactic nailing resulted in immediate postoperative deaths in 5 % vs. 11.4 % in therapeutic, and one technical complication was detected in each group. Among the surviving patients 75.9 % of the fractures and 100 % of impending lesions were able to walk after the operation. The mean survival time was 11 months in the therapeutic (range 1–49) and 14 in the prophylactic group (1–34). The prophylactic intramedullary nails required a lower transfusion rate (1.4 concentrates vs. 3.0), mobilised earlier (day 4.0 vs. 9.7) and needed a shorter hospital stay (eight days vs. 16 days) compared to therapeutic nails (p < 0.05).

Conclusion

Femoral intramedullary nailing of metastasic lesions provides satisfactory results both clinically and radiologically. Early treatment of the metastases prevents fractures and gives better results, improving life quality of these patients.     

Staged external and internal locked plating for open distal tibial fractures: A retrospective study of 16 patients

Background and purpose

Based on reported success with staged treatment of distal tibial fractures, we designed a 2-stage protocol including external/internal locked plating. We retrospectively assessed the outcome of open distal tibial fractures treated according to this protocol.

Patients and methods

From March 2006 through July 2008, 16 patients who sustained open distal tibial fractures were treated by a two-stage protocol. The first stage consisted of low-profile, locked plates for temporary external fixation after debridement and anatomic reduction, followed by soft tissue reconstruction. The second stage consisted of locked plates for definitive internal fixation, using minimally invasive percutaneous osteosynthesis. All fractures were followed for median 2 (1–3) years.

Results

The reduction was classified as being good in 15 patients and fair in 1 patient. All fractures united at a median of 6 (6–12) months. At the latest follow-up, 7 patients had excellent and 9 had good Iowa ankle scores; ankle motion ranged from a median of 10 (5–20) degrees of dorsiflexion to 40 (20–60) degrees of plantar flexion.

Interpretation

We believe that the 2-stage external/internal locked plating technique is an effective procedure for treatment of open distal tibial fractures in patients who need a long period of external fixation. We achieved good reduction with immediate ankle-sparing stable fixation. Soft tissue reconstruction and subsequent definitive fixation led to union of all fractures with good function.     

Safety of a novel high tibial osteotomy locked plate fixation for immediate full weight-bearing: a case-control study

Purpose

The safety and efficacy of the novel Limmed® system (locked plate fixation) for immediate full weight-bearing after medial opening wedge high tibial osteotomy (HTO) were evaluated in patients with symptomatic varus gonarthrosis.

Methods

A case series of 85 consecutive osteotomies performed with Limmed® locked plate fixation for medial opening wedge HTO was compared to a historical matched case-control series of 85 HTOs (85 patients) performed using the same implant without locked screws. Subjects were observed at seven and 15 days and three, six and 12 months after surgery. Endpoints for evaluation included the reporting of adverse events, weight-bearing status without pain, radiographic evidence of bony union and changes in correction angle during healing.

Results

Statistically significant differences were seen between groups in terms of safety (thrombophlebitis), time to weight-bearing, radiographic union and radiographic stability between the two groups. Patients of the Limmed® group reported less thrombophlebitis (one versus nine), outcome with shorter time for full weight-bearing (average 45 days difference, p = 0.01) and a shorter time for union (average four weeks difference). At the one-year follow-up the post-operative hip-knee-ankle angle was 4.2° of valgus in the Limmed® group and 2° of valgus in the control group. The adjusted mean difference of 2.2° was significant (p = 0.02) and related to loss of correction during healing in the control group with difference in implant stability. The severity of pain, knee score and walking ability improved in both groups with a significant difference before the third month (quicker for Limmed® group), while at the most recent follow-up only the difference for mobility in flexion was significant.

Conclusions

The Limmed® medial opening wedge HTO system represents a novel method of achieving a reliable correction while producing a stable fixation allowing satisfactory stability and bone healing with immediate full weight-bearing.