Treatment of distal radius fractures with a low-profile dorsal plating system: an outcomes assessment

PURPOSE: To evaluate objective functional and radiographic outcomes after internal fixation of acute, displaced, and unstable fractures of the distal aspect of the radius in adults by using a low-profile dorsal plating system. Our hypothesis was that the low-profile dorsal plating system would allow for a reduction of extensor tendon irritation and pain and provide stable osseous fixation. METHODS: Sixty consecutive unstable fractures in 59 patients were treated by open reduction internal fixation using a low-profile dorsal plating system. There were 29 type A, 14 type B, and 8 type C fractures (AO classification system). Fifty patients with 51 fractures returned for outcomes assessment by physical examination, plain radiographs, and completion of a validated musculoskeletal function assessment questionnaire. The minimum follow-up period was 1 year; the mean follow-up period was 24 months. Clinical evaluation was performed and plain radiographs were assessed for maintenance of immediate postoperative reduction and implant position. Objective functional assessment was obtained through the Disabilities of the Arm, Shoulder, and Hand questionnaire. RESULTS: Outcomes analysis showed no cases of extensor tendon irritation or rupture. Hardware removal was performed in 1 patient but no extensor tendon irritation or rupture was evidenced. The mean Disabilities of the Arm, Shoulder, and Hand score was 11.9; implant-related discomfort was minimal. All patients had an excellent (31 patients) or good (19 patients) result according to the scoring system of Gartland and Werley. The mean active range of motion was greater than 80% of that of the contralateral wrist in flexion/extension, pronation/supination, and ulnar/radial deviation. Extensor tendon function was unimpaired in all patients. Grip and pinch strength averaged 90% and 94% of the contralateral sides, respectively. Radiographic evaluation showed no change in fracture reduction or implant position. CONCLUSIONS: The treatment of distal radius fractures with a low-profile stainless steel dorsal plating system is a safe and effective method that provides stable internal fixation and allows for full extensor tendon glide and full metacarpophalangeal joint motion. Objective outcome testing showed uniformly good to excellent recovery of wrist and hand function in all patients. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic, Level IV.     

Volar approach to distal radius fractures

The volar approach to the distal radius fracture is an important exposure in the treatment of these fractures, particularly with the growing enthusiasm for fixed-angle volar plating. With reports in the literature documenting complications associated with external fixation and dorsal plating, the volar approach has become ever more popular. Moreover, advancements in locking plate technology have expanded the indications for palmar plating beyond volar shear and volarly displaced fractures to include unstable intra-articular distal radius fractures. The surgical approach remains the same as when Henry recommended the interval between the flexor carpi radialis and the radial artery. Critical elements of the surgical technique include releasing the brachioradialis, gaining exposure all the way to the sigmoid notch, and building the intra-articular reduction, beginning with the intermediate column and moving radially. The relevant anatomy, indications and contraindications, postoperative care, and a pertinent case presentation are discussed.     

掌侧入路斜T形钢板内固定治疗桡骨远端不稳定骨折

目的探讨掌侧入路斜T形钢板治疗桡骨远端不稳定骨折的临床疗效。方法对25例桡骨远端不稳定骨折采用掌侧入路斜T形钢板内固定并植骨治疗。结果 25例均获得随访,时间6～18个月。X线片显示骨折全部愈合。根据Gartland-Wefley腕关节评分标准进行评估:优18例,良5例,可2例。结论对于桡骨远端不稳定骨折,采用掌侧入路斜T形钢板内固定辅以植骨,既能使骨折复位、固定满意,又有利于术后早期手和腕部的功能康复锻炼,是治疗不稳定性桡骨远端骨折的有效方法。     

Volar versus dorsal fixed-angle fixation of dorsally unstable extra-articular distal radius fractures: a biomechanic study

PURPOSE: To evaluate and compare the biomechanic rigidity and strength of 3 fixed-angle plates used to treat extra-articular distal radius fractures that are dorsally unstable. Volar fixed-angle plates were compared with a dorsal fixed-angle nail plate. METHODS: Three plate constructs were tested: the dorsal nail plate (DNP), distal volar radius (DVR) plate, and locking compression plate (LCP) volar distal radius plate. With anatomic, third-generation, artificial composite radii, dorsally unstable extra-articular distal radius fracture models were made by cutting a wedge osteotomy with an 8-mm dorsal gap 1 cm from the articular surface. These models were then fixed with the 3 implants by the method recommended by the manufacturer. The proximal radii of each specimen were attached to the base of a materials testing machine with a probe centered at the radial side of the lunate fossa. The specimens were loaded at a constant rate to failure under axial compression. Load and displacement were plotted graphically, and the resulting rigidities and strengths of each plate were assessed statistically. RESULTS: The DVR group had significantly greater stiffness than the LCP group. The DVR group had significantly higher maximum loads than both the DNP and LCP groups. There were no significant differences in yield loads. Both the DNP and DVR groups had significantly less displacement at yield than the LCP group. CONCLUSIONS: These 3 groups had similar yield loads. However, the LCP was less stiff than the DVR and had more displacement at yield than both the DVR and DNP. The yield load of all 3 implants was much higher than previously described loads for active wrist and finger motion.     

Outcome following distally locked volar plating for distal radius fractures with metadiaphyseal involvement

BackgroundThe surgical treatment of metadiaphyseal distal radius fractures may be difficult due to the associated articular or periarticular extension that limits standard fixation techniques. Longer distal radius volar locking plates allow stable fixation of the distal fragments while providing standard plate fixation in the proximal radius. We hypothesize that this plating technique allows adequate fixation to both the distal radius and metadiaphyseal fragments. The purpose of the study is to describe the outcomes, radiographic parameters, secondary surgeries, and complication rate with this device.MethodsA retrospective chart review was conducted on adult patients with a distal radius fracture and metadiaphyseal involvement treated with a volar, distally locked plate. All patients were followed up for radiographic union, with a mean time of 219 days (range 38–575). Fracture patterns, outcomes of range of motion, grip strength, and complications, as well as injury, post open reduction and internal fixation (ORIF), and finally, healed radiographic parameters were recorded.ResultsTwenty patients with 21 fractures were included. At union, mean radiographic parameters were the following: volar tilt of 8°, radial inclination of 27°, radial height of 14 mm, and ulnar variance of −1 mm. The mean final range of motion was 52° flexion, 50° extension, 68° pronation, and 66° supination. Complications included one infection and one plate removal. Four patients developed a nonunion requiring secondary procedures. There were no incidents of hardware failure or adhesions requiring tenolysis.ConclusionDistally locked long volar plating for metadiaphyseal distal radius fractures is a safe and effective treatment option for these complex fracture patterns allowing anatomic restoration of the radial shaft and distal radius.     

Comparison of ultrasound and dorsal tangential view for dorsal cortex screw penetration in volar plating of the distal radius

We compared the accuracy of the fluoroscopic dorsal tangential view (DTV) and an ultrasound (US) examination in detecting dorsal screw penetration during volar distal radius plating. In six fresh cadaveric distal radii, seven periarticular locking screws in two rows for each plate were inserted according to the measured length using a depth gauge and then replaced with another that was 1 and 2 mm longer, respectively. The actual protruded length of each screw was determined using computed tomography (CT) images. The accuracy of US and DTV measurements was determined using the intraclass correlation coefficient (ICC), as both measurements were compared with CT measurements. The ICC of US and DTV was 0.96 and 0.75, respectively, for all screws. After excluding the data for proximal-row screws, the ICC of US remained unchanged at 0.96, and that of DTV improved to 0.86. The ICC of US was significantly higher than that of DTV (p < 0.01). US had a 100% detection rate for screw protrusion of more than 1.0 mm. US examination showed excellent consistency with CT measurements and its accuracy was not affected by screw location. US might thus be a practical tool for detecting dorsal cortex screw penetration during volar distal radius plating.     

掌侧接骨板治疗老年桡骨远端背侧移位骨折临床分析

目的 探讨掌侧万向锁定加压双柱接骨板治疗老年人桡骨远端背侧移位骨折的临床疗效。方法 分析2012年7月至2015年7月采用掌侧万向锁定加压双柱接骨板治疗的37例桡骨远端背侧移位C型骨折患者,男 11例,女26例;年龄60～78岁,平均70．7岁;骨折按AO分型：c1型7,c2型13例,c3型17例。末次随访时通过术后X线片评估桡骨远端骨折复位情况、测量各项影像学参数,并采用Gart land---Werley评定疗效。结果 所有患者术后获6～27个月(平均19．6个月)随访。X线片示骨折愈合时间3～4个月,平均3．5个月。按照Garland—Werley评分：优16例,良 14例,可6例,1例因疼痛再次手术,优良率81.08％,无感染及不愈合。末次随访时桡骨茎突高度 8．30～12．52 mm,平均10．42mm;掌倾角10°～14.20°,平均12．60°;尺偏角 17.30°～23.40°,平均2I．00°。结论 掌侧万向锁定加压双柱接骨板是治疗老年桡骨远端背侧移位骨折的有效方法。     

Low-profile dorsal plating for dorsally angulated distal radius fractures: an outcomes study

PURPOSE: Controversy exists surrounding the effectiveness and complications associated with dorsal plating for distal radius fractures. This study evaluated the functional outcome of dorsal plating for dorsally angulated distal radius fractures at a single institution. METHODS: Thirty patients formed the study cohort. All plates were low profile and stainless steel. Radiographic parameters, range of motion, and strength compared with the uninjured side were recorded. The functional outcome was evaluated by the Disabilities of the Arm, Shoulder, and Hand questionnaire and the Gartland and Werley scoring system. RESULTS: The median patient age at surgery was 59 years. The median follow-up period was 18 months. According to the AO classification system, there were 4 type A fractures, 5 type B fractures, and 21 type C fractures. The median preoperative dorsal angulation was 30 degrees, and the median postoperative angulation was -4 degrees volar. Sixteen patients with fractures had an intra-articular step-off or gap, which were all corrected to neutral by the procedure. Seven patients with the fractures showed positive ulnar variance, all corrected to neutral at time of follow-up evaluation. Compared with the contralateral side, the mean extension and flexion were 88% and 81%, respectively; pronation and supination were 89% and 87%, respectively; and grip strength and thumb pinch were 78% and 94%, respectively. The mean postoperative Disabilities of the Arm, Shoulder, and Hand questionnaire score was 15 points, and 28 patients had Gartland and Werley scores of good or excellent. No patients needed to have their plates removed, and no extensor tendon rupture was reported. One patient lost reduction, 1 patient needed a tenolysis of the extensor pollicis longus tendon, and 2 patients required the removal of a single metaphyseal screw. CONCLUSIONS: Results from this study show that patients can expect to have 80% of their range of motion and strength after dorsal plating for distal radius fractures. Moreover, 93% of the patients will have good to excellent functional outcomes. Complications from dorsal plating may be caused by the specific plate used, rather than by the technique itself, supporting a dorsal approach for dorsally angulated distal radius fractures.     

The treatment of severely comminuted intra-articular fractures of the distal radius

Comminuted fractures of the distal end of the radius are caused by high-energy trauma and present as shear and impacted fractures of the articular surface of the distal radius with displacement of the fragments. The force of the impact and the position of the hand and carpal bone determine the pattern of articular fragmentation and their displacement and the amount and the extent of frequent concommitant ligament and carpal bone injury. The result of the osseous lesion in comminuted fractures was termed "pilon radiale", which emphasizes the amount of damage to the distal radius and the difficulties to be expected in restoring the articular congruity. Besides this the additional injury, either strain of disruption of the ligaments and the displacement of the carpus and/ or the triangular fibrocartilage complex will equally influence the functional outcome. This review will expand on the relevant anatomy, correct classification and diagnosis of the fracture, diagnostic tools and operative treatment options. Current treatment concepts are analysed with regard to actual literature using the tools of evidence based medicine criteria. A new classification of severely comminuted distal radius fractures is proposed using CT data of 250 complex intraarticular radius fractures. Finally a standardized treatment protocol using external fixation in combination with minimal invasive internal osteosynthesis is described.     

Volar plate versus k-wire fixation of distal radius fractures

The optimal management of distal radius fractures remains controversial. The aim of this study was to compare the radiographic and functional outcomes of 318 patients who underwent k-wire fixation or volar plating for fractures of the distal radius. Patients were aged between 20 and 65 years and followed for a mean of 32 months. The mean values for volar tilt, radial inclination, radial length and ulnar variance were all significantly better in the volar plate group. Malunion occurred in 13.2% of patients undergoing k-wiring and 4% of patients treated with a volar plate (p < 0.007). Higher values for radial inclination, radial length and volar tilt correlated with better functional outcome as measured by disabilities of the arm shoulder and hand (DASH) and patient rated wrist evaluation (PRWE) scores. Lower values for ulnar variance correlated with better functional outcome. Although volar plate treatment resulted in a superior radiological outcome, there was no evidence that this translated into a superior functional outcome (DASH 13.12 vs. 11.25, p = 0.28) (PRWE 17.56 vs. 16.31, p = 0.69). The k-wiring procedure remains a suitable inexpensive option for simple fractures. Volar plating should be reserved for complex fractures that cannot be reduced by closed means.     

Functional outcome and complications after volar plating for dorsally displaced, unstable fractures of the distal radius

PURPOSE: Despite the recent popularity of volar plating for dorsally displaced distal radius fractures there is a paucity of data documenting the results of this treatment method. The purpose of this study was to determine the functional outcome of patients treated with volar fixed-angle plating for dorsally displaced, unstable distal radius fractures. METHODS: We reviewed the records of all patients treated at our institution with internal fixation using volar plates for dorsally displaced, comminuted distal radius fractures. Patients with follow-up periods shorter than 12 months were excluded from the study. Outcomes were evaluated at the latest follow-up examination with the Disabilities of the Arm, Shoulder, and Hand and the Gartland and Werley scoring systems. RESULTS: We studied 41 patients with a mean age of 53 years. The average follow-up period was 17 months. All fractures were stabilized with volar locking plates. Radiographs in the immediate postoperative period showed a mean radial height of 11 mm, mean radial inclination of 21 degrees , and mean volar tilt of 4 degrees. At fracture healing the mean radial height was 11 mm, mean radial inclination was 21 degrees, and mean volar tilt was 5 degrees. The average score on the Disabilities of the Arm, Shoulder, and Hand questionnaire was 14 and all patients achieved excellent and good results on the Gartland and Werley scoring system, indicating minimal impairment in activities of daily living. Nine patients experienced postoperative complications. There were 4 instances of loss of reduction with fracture collapse, 3 patients required hardware removal for tendon irritation, 1 patient developed a wound dehiscence, and 1 patient had metacarpophalangeal joint stiffness. CONCLUSIONS: Patients with unstable, dorsally displaced fractures of the distal radius treated with volar fixed-angle devices have good or excellent functional outcomes despite a high complication rate. When compared with previous reports on dorsal plating volar plates appear to have a higher incidence of fracture collapse but a lower rate of hardware-related complications. Complex fracture patterns thus mandate a careful and individualized approach. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic, Level III.     

Percutaneous pins versus volar plates for unstable distal radius fractures: a biomechanic study using a cadaver model

PURPOSE: A biomechanic study using a cadaver model of a dorsally unstable distal radius fracture was used to compare the stability of percutaneous pinning and volar fixed-angle plating. Among the many surgical options for treating distal radius fractures are percutaneous pinning and internal plate fixation. Although percutaneous pin fixation requires less soft-tissue trauma and has low complication rates, plate fixation allows for early active movement with good clinical results. The biomechanic stability of these 2 methods was studied by using a cadaver model of a dorsally unstable intra-articular distal radius fracture. METHODS: This study was performed on 7 fresh-frozen cadaver arms, in each of which an unstable intra-articular fracture with dorsal comminution was created. The fracture was first fixed with 0.062-mm K-wires inserted in standard crossed fashion and was tested in a pneumatic loading device that indirectly loaded the wrists through the 5 motor tendons 3 times at each level of force in flexion and extension. Testing was then repeated after removal of the pins and fixation with a fixed-angle DVR distal volar radius plate system (Hand Innovations, Inc., Miami, FL). Testing was performed in flexion up to 68 N and in extension up to 100 N, and the distance across the fracture site was measured. RESULTS: Volar plating was significantly more stable than pinning, with an average movement across the fracture site of 2.51 mm for pin fixation and 1.07 mm for plate fixation. The pins also showed a substantial degree of slipping after repeated stressing, but the plates remained stable. CONCLUSIONS: These results show the superior biomechanic stability of internal fixation using plates for dorsally comminuted intra-articular distal radius fractures in this cadaver model. Further clinical correlations are needed.