基于丝素/胶原/羟基磷灰石仿生骨材料的多维结构及其性能

目的 体外构建丝素蛋白（silk fibroin,SF）、I型胶原(type I collagen,Col-I)和羟基磷灰石(hydroxyapatite, HA)共混体系制备二维复合膜和三维仿生支架,研究其理化性质和生物相容性,探讨其在组织工程支架材料中应用的可行性。方法 通过在细胞培养小室底部共混SF/Col-I/HA以及低温3D打印结合真空冷冻干燥法制备二维复合膜及三维支架。通过机械性能测试、电子显微镜和Micro-CT检测材料的理化性质,检测细胞的增殖评估其生物相容性。结果 通过共混和低温3D打印获得稳定的二维复合膜及三维多孔结构支架;力学性能具有较好的一致性,孔径、吸水率、孔隙率和弹性模量均符合构建组织工程骨的要求;支架为网格状的白色立方体,内部孔隙连通性较好; HA均匀分布在复合膜中,细胞黏附在复合膜上,呈扁平状;细胞分布在支架孔壁周围,呈梭形状,生长及增殖良好。结论 利用SF/Col-I/HA共混体系成功制备复合膜及三维支架,具有较好的孔连通性与孔结构,有利于细胞和组织的生长以及营养输送,其理化性能以及生物相容性符合骨组织工程生物材料的要求。     

Fabrication and characterization of chitosan–collagen crosslinked membranes for corneal tissue engineering

This article describes a chitosan–collagen composite membrane as corneal tissue-engineering biomaterials. The membrane was prepared by dissolving the chitosan into collagen with the weight ratio of 0, 15, 30, 45, 60, and 100%, followed by crosslinked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. Mechanical properties, contact angles, and optical transmittance were determined and compared between chitosan membrane and crosslinking composite membrane. As a result, the optical transparency and mechanical strength of the chitosan–collagen membranes were significantly better than that of the sample of chitosan. In addition, in vitro cell culture studies revealed that the collagen has no negative effect on the cell morphology, viability, and proliferation and possess good biocompatibility. Overall, the dendrimer crosslinked chitosan–collagen composite membranes showed promising properties that suggest that these might be suitable biomaterials for corneal tissue-engineering applications.     

Development of biodegradable polyesterurethane membranes with different surface morphologies for the culture of osteoblasts

To evaluate the biocompatibility of biodegradable polyesterurethane membranes with different surface morphologies for their possible use as orthopedic biomaterials, rat osteoblasts were cultured on smooth, sunken, and particulate polyesterurethane membranes. A close interaction between cells and exposed particles on the particulate membranes was found. Cells on the particulate surfaces were well spread and flattened and had the greatest adhesion while cells on the smooth surfaces were more rounded, less spread, and less adhered. In addition, in order to investigate their in vivo degradation rates, the morphologic changes in retrieved membranes from 2, 4, and 8 weeks after subcutaneous implantation were observed by scanning electron microscopy and their average molecular weight changes were determined by gel permeation chromatography. These analyses showed that smooth membranes, compared with the two other surface membrane types, had the greatest rate and degree of molecular weight change. In contrast, the molecular weight of particulate membranes, which favor the osteoblast culture, had not changed significantly at 8 weeks postimplantation. Thus particulate polyesterurethane membrane surfaces may be of use as an orthopedic biomaterial, and polyesterurethane membranes certainly provide an ideal system for further study of the relative contributions to biocompatibility and degradation derived from surface morphology.     

Human monocyte adhesion and activation on crystalline polymers with different morphology and wettability in vitro

This study evaluated the effects of crystalline polyamide (Nylon-66), poly(ethylene-co-vinyl alcohol) (PEVA), and poly(vinylidene fluoride) (PVDF) polymers with nonporous and porous morphologies on the ability of monocytes to adhere and subsequently activate to produce IL-1beta, IL-6, and tumor necrosis factor alpha. The results indicated monocyte adhesion and activation on a material might differ to a great extent, depending on the surface morphology and wettability. As the polymer wettability increases, the ability of monocytes to adhere increases but the ability to produce cytokines decreases. Similarly, these polymers, when prepared with porous surfaces, enhance monocyte adhesion but suppress monocyte release of cytokines. Therefore, the hydrophobic PVDF with a nonporous surface stimulates the most activity in adherent monocytes but shows the greatest inhibition of monocyte adhesion when compared with all of the other membranes. In contrast, the hydrophilic Nylon-66, which has a porous surface, is a relatively better substrate for this work. Therefore, monocyte behavior on a biomaterial may be influenced by a specific surface property. Based on this result, we propose that monocyte adhesion is regulated by a different mechanism than monocyte activation. Consequently, the generation of cytokines by monocytes is not proportional to the number of cells adherent to the surface.     

Blood-compatibility of polyurethane/liquid crystal composite membranes.

Polyurethane/liquid crystal composite membranes were first suggested to be used as biomaterials. In our work, three series of polyurethane/liquid crystal composite membranes based on three different kinds of liquid crystal compounds [N-(-4-methyoxybenzylidene)-4'-heptylaniline, 4-pentyl-4'-nitrile-biphenyl and cholesteryl oleyl carbonate] were prepared by casting on glass plates from a tetrahydrofuran (THF) solution of polymer and liquid crystal at room temperature. In our opinion, the formation of liquid crystal phase on the composite membrane surface is the basic requirement for getting better biomaterial. The result of this work is in accordance with our opinion. The effect of liquid crystal content on the formation of liquid crystal phase was identified by the observation of optical polarization microscopy (OPM). The results showed that the content of liquid crystal in composite membrane must be more than 30% (wt) in order to form liquid crystal phase on the composite membrane surface. The blood-compatibility of the composite membranes was assessed from SEM observation of the platelet's adhesion to membrane's surface, blood clotting time and haemolysis ratio. The observation of platelet's adhesion showed that the platelets gathered together on the pure polyurethane films, but the amount of platelets which were adherent on the surface covered by the liquid crystal phase was fewer than that of pure polyurethane film when platelet-rich plasma was allowed to be in contact with the membranes for 1 h at room temperature. The determination of blood clotting time and haemolysis ratio showed that these polyurethane/liquid crystal composite membranes, in which the content of liquid crystal was more than 30% (wt), appear to be beneficial in improving the blood compatibility and reducing the thrombogenicity.     

Cytokine profiling using monocytes/macrophages cultured on common biomaterials with a range of surface chemistries

Cytokines, chemokines, and growth factors were assayed from the supernatants of monocytes and macrophages cultured on common biomaterials with a range of surface chemistries. TNF-alpha, MCP-1, MIP-1alpha, IL-8, IL-6, IL-1beta, VEGF, IL-1ra, and IL-10 were measured from monocyte/macrophage cultures at different stages of activation and differentiation seeded onto polyethylene, polyurethane, expanded polytetrafluoroethylene, polymethyl methacrylate, and a hydrogel copolymer of 2-hydroxyethyl methacrylate, 1-vinyl-2-pyrrolidinone, and polyethylene glycol acrylate in tissue culture polystyrene (TCPS) plates. Empty TCPS wells and organo-tin polyvinyl chloride served as "blanks" and positive controls, respectively. Results showed an overall increase in cytokine, chemokine, and growth factor production as monocytes are activated or differentiated into macrophages and that proinflammatory and anti-wound healing cytokines and chemokines dominate this profile. However, cytokine production was only modestly affected by the surface chemistry of these four stable and noncytotoxic biomaterials.     

Reduced platelet adhesion on the surface of polyurethane bearing structure of sulfobetaine

Poly(etherurethane)s are widely used as blood-contacting biomaterials due to their good biocompatibility and mechanical properties. Nevertheless, their blood compatibility is still not adequate for the more demanding applications. Surface modification is an effective way to improve the blood compatibility and retain the bulk properties of biomaterials. The purpose of present study was to design and synthesize a novel nonthrombogenic biomaterial by modifying the surface of poly(etherurethane) with zwitterionic monomer. Films of polyurethane were grafted with sulfobetaine by a three-step procedure. In the first step, the film surfaces were treated with hexamethylene diisocyanate (HDI) in toluene at 50 degrees C in the presence of di-n-butyl tin dilaurate (DBTDL) as a catalyst. The extent of the reaction was measured by ATR-IR spectra; a maximum number of free NCO group was obtained after a reaction time of 90 min. In the second step, the hydroxyl group of 4-dimethylamino-1-butanol (DMAB) was allowed to react in toluene with isocyanate groups bound on the surface. In the third step, sulfobetaine was formed on the surface through the ring-opening reaction between tertiary amine of DMAB and 1,3- propane-sultone (PS). It was characterized by ATR-IR, XPS. The data showed that the grafted surfaces were composed of sulfobetaine. The results of the contact angle measurements showed that they were strongly hydrophilic. The state of platelet adhesion and shape variation for the attached platelets was described. The modified surface shows excellent blood compatibility feature by the low platelet adhesion.     

Phenotypic dichotomies in the foreign body reaction

To better understand the relationship between macrophage/foreign body giant cell adhesion and activation on surface-modified biomaterials, quantitative assessment of adherent cell density (cells per mm(2)) and cytokine production (pgs per mL) were determined by ELISA. Further analysis to identify cellular activation was carried out by normalizing the cytokine concentration data to provide a measure of cellular activation. This method of analysis demonstrated that hydrophobic surfaces provided statistically significantly greater adherent cell densities than hydrophilic/neutral surfaces. However, when cell activation parameters were determined by normalization to the adherent cell density, the hydrophilic/neutral surfaces demonstrated statistically significantly greater levels of activation and production of IL-10, IL-1beta, IL-6, IL-8, and MIP-1beta. With increasing time, production of the anti-inflammatory cytokine IL-10 increased, whereas IL-1beta, IL-6, and IL-8 decreased and MIP-1beta was relatively constant over the culture time period. This observed dichotomy or disparity between adhesion and activation may be related to surface-induced adherent cell apoptosis. Further evaluation of macrophage activation on biomaterial surfaces indicated that an apparent phenotypic switch in macrophage phenotype occurred over the course of the in vitro culture. Analysis of cytokine/chemokine profiles with surface-modified biomaterials revealed similarities between the classically activated macrophages and the biomaterial-adherent macrophages early (day 3) in culture, while at later timepoints the biomaterial-adherent macrophages produced profiles similar to alternatively activated macrophages. Classically activated macrophages are those commonly activated by lipopolysaccharide (LPS) or interferon-gamma (IFN-gamma) and alternatively activated macrophages are those activated by IL-4/IL-13 or IL-10. Surface modification of biomaterials offer an opportunity to control cellular activation and cytokine profiles in the phenotypic switch, and may provide a means by which macrophages can be induced to regulate particular secretory proteins that direct inflammation, the foreign body reaction, wound healing, and ultimately biocompatibility.     

Tissue anti-adhesion potential of biodegradable PELA electrospun membranes

The most commonly used anti-adhesion device for separation and isolation of wounded tissues after surgery is the polymeric membrane. In this study, a new anti-adhesion membrane from polylactide–polyethylene glycol tri-block copolymer (PELA) has been synthesized. The synthesized copolymers were characterized by gel permeation chromatography and ¹H nuclear magnetic resonance spectroscopy. PELA membrane was prepared by electrospun. The prepared copolymer membranes were more flexible than the control poly-d-l-lactic acid (PDLLA) membrane, as investigated by the measurements of glass transition temperature. Its biocompatibility and anti-adhesion capabilities were also evaluated. In vitro cell adhesions on the PELA copolymer membrane and PDLLA membrane were compared by the culture of mouse fibroblasts L929 on the surfaces. For in vivo evaluation of tissue anti-adhesion potential, the PDLLA and PELA copolymer membranes were implanted between cecum and peritoneal wall defects of rats and their tissue adhesion extents were compared. It was observed that the PELA copolymer membrane was very effective in preventing cell or tissue adhesion on the membrane surface, probably owing to the effects of hydrophilic polyethylene glycol.     

等离子体处理聚氨酯-胶原-硫酸软骨素复合材料的制备及性能评价

BACKGROUND: Polyurethane has excellent mechanical properties and perfect biocompatibility. But its hydrophobicity is not conductive to the adhesion and growth of cells, which limits its use as the scaffold of the skin. OBJECTIVE: To modify a polyurethane scaffold by plasma processing and crosslinking then to test its hydrophilic, mechanical properties and cytotoxicity in vitro. METHODS: Polyurethane porous materials were prepared into membranous materials by eletrospinning method and modified by CO2 and NH3 plasma. Then the plasma-modified polyurethane-collagen- chondroitin sulfate composite materials were prepared by crosslinking with collagen type I and chondroitin sulfate at the same time, which was named Group A. Polyurethane porous materials which were electrospun and modified by plasma were soaked into a mixed solution of collagen and chondroitin sulfate without crosslinking agent. After being air-dryed, the materials were prepared, named Group B. Polyurethane porous materials which were electrospun and modified by plasma were named Group C. Electrospun polyurethane porous materials without other treatments were named Group D. Then the morphology, hydrophilicity, mechanical property and in vitro cytotoxicity of the four groups were compared. RESULTS AND CONCLUSION: The plasma-modified polyurethane-collagen-chondroitin sulfate composite materials enjoy excellent fiber morphology, hydrophilicity and mechanical properties. It can also promote cell adhesion, proliferation and have no cytotoxicity.     

Effects of molecular architecture of phospholipid polymers on surface modification of segmented polyurethanes

To modify the surface properties of segmented polyurethane (SPU), effects of the molecular architecture of the 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers on the performance of the SPU/MPC polymer membrane were investigated. We combined the random-type, block-type, and graft-type of the MPC polymers with a typical SPU, Tecoflex^® using double solution casting procedure. The graft-type MPC polymers composed of a poly(MPC) main chain and poly(2-ethylhexyl methacrylate (EHMA)) side chains were synthesized through the combination of two different living radical polymerization techniques to regulate the density and chain length of the side chains. The SPU membranes modified with the MPC polymers were characterized using X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The results revealed that the MPC units were located on the SPU surface. Although the breaking strength of the SPU membranes modified with block-type poly(MPC-block-EHMA) and graft-type poly(MPC-graft-EHMA) was lower than that of SPU membranes modified with random-type poly(MPC-random-EHMA), their breaking strengths were adequate for manufacturing medical devices. On the other hand, better stability was observed in the MPC polymer layer on the SPU membrane after immersion in an aqueous medium, wherein the SPU membrane had been modified with the poly(MPC-graft-EHMA). This was because of the intermixing of the hydrophobic poly(EHMA) segments in the domain of the hard segments in the SPU membrane. After this modification, each SPU/MPC polymer membrane showed hydrophilic nature based on the MPC polymers and a dramatic suppression of protein adsorption. From these results, we concluded that the SPU membrane modified with the poly(MPC-graft-EHMA) was one of the promising polymeric biomaterials for making blood-contacting medical devices.     

In vivo leukocyte cytokine mRNA responses to biomaterials are dependent on surface chemistry

An in vivo mouse cage implant system was used to determine whether leukocyte cytokine mRNA responses to implanted biomaterials were dependent on surface chemistry. Surfaces displaying various chemistries (hydrophobic, hydrophilic, anionic, and cationic) were placed into stainless steel cages and implanted subcutaneously. Semiquantitative RT-PCR analyses revealed that hydrophilic surfaces showed a decreased expression of proinflammatory cytokines, IL-6 and IL-8, and pro-wound healing cytokines, IL-10 and TGF-beta by adherent cells, and mRNA levels of the proinflammatory cytokine, IL-1beta, and the pro-wound healing cytokine IL-13 were decreased in surrounding, exudate cells. Cytokine responses by adherent and exudate cells to hydrophobic, anionic and cationic surfaces were similar and indicative of a strong inflammatory response at the earliest time point followed by a wound healing response at later time points. However, no differences in the types or levels of exudate cells for any of the surfaces or the empty cage at each of the respective time points were observed, indicating their respective biocompatibility. These studies identify hydrophilic surface chemistries as having significant effects on leukocyte cytokine responses in vivo by decreasing the expression of inflammatory and wound healing cytokines by inflammatory cells adherent to the biomaterial as well as present in the surrounding exudate.     

New modified polyetheretherketone membrane for liver cell culture in biohybrid systems: adhesion and specific functions of isolated hepatocytes

There has been growing interest in innovative materials with physico-chemical properties that provide improved blood/cell compatibility. We propose new polymeric membranes made of modified polyetheretherketone (PEEK-WC) as materials with potential for use in biohybrid devices. PEEK-WC exhibits high chemical, thermal stability and mechanical resistance. Owing to its lack of crystallinity this polymer can be used for preparing membranes with cheap and flexible methods. We compared the properties of PEEK-WC membranes to polyurethane membranes prepared using the same phase inverse technique and commercial membranes. The physico-chemical properties of the membranes were characterised by contact angle measurements. The different parameters acid (gamma+), base (gamma-) and Lifshitz-van der Waals (gammaLW) of the surface free energy were calculated according to Good-van Oss's model. We evaluated the cytocompatibility of PEEK-WC membranes by culturing hepatocytes isolated from rat liver. Cell adhesion and metabolic behaviour in terms of ammonia elimination, urea synthesis and protein synthesis were evaluated during the first days of culture. Liver cells adhered and formed three-dimensional aggregates on the most tested membranes. PEEK-WC membranes promoted hepatocyte adhesion most effectively. Urea synthesis, ammonia elimination and protein synthesis improved significantly when cells adhered to PEEK-WC membrane. The considerable metabolic activities of cells cultured on this membrane confirmed the good structural and physico-chemical properties of the PEEK-WC membrane that could be a promising biomaterial for cell culture in biohybrid devices.     

Detection of charges and their distribution on dialysis membranes with cationic/anionic dyes using confocal laser scanning microscopy.

Methods for the detection of positive or negative charges on the surface of biomaterials/membranes and inside a membrane are important for the characterisation of such materials. We tested different dyes and optimized staining procedures. Under standardized conditions negatively charged membranes were stained with cationic triarylmethane compounds such as crystal violet and positively charged membranes with the anionic anthraquinone dye anthralan blue B. There was no staining of uncharged cellulose membranes. The applicability of these methods was demonstrated on membranes coated to varying degrees with charged compounds such as heparin, these changes in charge being detectible quantitatively by photometry. The distribution of charges inside a membrane was detected by optical sectioning across the stained (FITC labelled poly-L-lysine) membrane using confocal laser scanning microscopy (LSM). LSM offers a completely new application possibility in biomaterial and biocompatibility research.     

Evaluation of a poly(vinyl pyrollidone)-coated biomaterial for urological use

The associated problems of bacterial biofilm formation and encrustation that may cause obstruction or blockage of urethral catheters and ureteral stents often hinders the effective use of biomaterials within the urinary tract. In this in vitro study, we have investigated the surface properties of a hydrophilic poly(vinyl pyrollidone) (PVP)-coating applied to polyurethane and determined its suitability for use as a urinary tract biomaterial by comparing its lubricity and ability to resist bacterial adherence and encrustation with that of uncoated polyurethane and silicone. The PVP-coated polyurethane was significantly more hydrophilic and more lubricious than either uncoated polyurethane or silicone. Adherence of a hydrophilic Escherichia coli isolate to PVP-coated polyurethane and uncoated polyurethane was similar but significantly less than adherence to silicone. Adherence of a hydrophobic Enterococcus faecalis isolate to PVP-coated polyurethane and silicone was similar but was significantly less than adherence to uncoated polyurethane. Struvite encrustation was similar on the PVP-coated polyurethane and silicone but significantly less than on uncoated polyurethane. Furthermore, hydroxyapatite encrustation was significantly less on the PVP-coated polyurethane than on either uncoated polyurethane or silicone. The results suggest that the PVP-coating could be useful in preventing complications caused by bacterial biofilm formation and the deposition of encrustation on biomaterials implanted in the urinary tract and, therefore, warrants further evaluation.     

Preparation and Characterization of a Porous Scaffold Based on Poly(D,L-Lactide) and N-Hydroxyapatite by Phase Separation

In this study, a series of porous scaffolds were prepared from poly(D,L-lactide) (PLA) and nanohydroxyapatite (HA) using the phase separation method. HA/PLA composite membranes and PLA membranes with a microporous structure (pore size around 10–20 μm) were observed by scanning electron microscopy and these micropores were well distributed throughout the PLA membranes. The surface morphology of HA/PLA composite membranes was significantly improved compared to pure PLA membrane. Also, the mechanical property and contact angle of composite membranes were different from that of pure PLA films. The immortalized rat osteoblastic ROS 17/2.8 cell line was used in this research to study the cell adhesion and proliferation behavior, and the results indicated that composite membranes had great cell affinity and good biocompatibility.     

Preparation and characterization of a porous scaffold based on poly(D,L-lactide) and N-hydroxyapatite by phase separation

In this study, a series of porous scaffolds were prepared from poly(D,L-lactide) (PLA) and nanohydroxyapatite (HA) using the phase separation method. HA/PLA composite membranes and PLA membranes with a microporous structure (pore size around 10-20 μm) were observed by scanning electron microscopy and these micropores were well distributed throughout the PLA membranes. The surface morphology of HA/PLA composite membranes was significantly improved compared to pure PLA membrane. Also, the mechanical property and contact angle of composite membranes were different from that of pure PLA films. The immortalized rat osteoblastic ROS 17/2.8 cell line was used in this research to study the cell adhesion and proliferation behavior, and the results indicated that composite membranes had great cell affinity and good biocompatibility.     

Initial adhesion and surface growth of Staphylococcus epidermidis and Pseudomonas aeruginosa on biomedical polymers

The infection risk of biomaterials implants varies between different materials and is determined by an interplay of adhesion and surface growth of the infecting organisms. In this study, we compared initial adhesion and surface growth of Staphylococcus epidermidis HBH(2) 102 and Pseudomonas aeruginosa AK1 on poly(dimethylsiloxane), Teflon, polyethylene, polypropylene, polyurethane, poly(ethylene terephthalate), poly(methyl methacrylate), and glass. Initial adhesion was measured in situ in a parallel plate flow chamber with microorganisms suspended in phosphate-buffered saline, while subsequent surface growth was followed in full and in 20 times diluted growth medium. Initial adhesion of both bacterial strains was similar to all biomaterials. In full growth medium, generation times of surface growing S. epidermidis ranged from 17 to 38 min with no relation to wettability, while in diluted growth medium generation times increased from 44 to 98 min with increasing surface wettability. For P. aeruginosa no influence of surface wettability on generation times was observed, but generation times increased with decreasing desorption rates, maximal generation times being 47 min and minimal values down to 30 min. Generally, generation times of adhering bacteria were shorter than of planktonic bacteria. In conclusion, surface growth of initially adhering bacteria is influenced by biomaterials surface properties to a greater extent than initial adhesion.     

Platelet adhesion onto segmented polyurethane surfaces modified by carboxybetaine

Polyurethanes are widely used as blood-contacting biomaterials due to their good biocompatibility and mechanical properties. Nevertheless, their blood compatibility is still not adequate for more demanding applications. Surface modification is an effective way to improve the hemocompatibility for biomaterials. The purpose of present study was to synthesize a novel nonthrombogenic biomaterial by modifying the surface of polyurethane with Zwitterions of carboxybetaine monomer. The films of polyurethane were grafted with two kinds of carboxybetaine by a three-step procedure. In the first step, the film surfaces were treated with hexamethylene diisocyanate (HDI) in toluene at 50 degrees C in the presence of di-n-butyl tin dilaurate (DBTDL) as a catalyst. The extent of the reaction was measured by ATR-FT-IR spectra: a maximum number of free NCO group was obtained after a reaction time of 90 min. In the second step, the hydroxyl group of N,N-dimethylethylethanolamine (DMEA) or 4-dimethylamino-1-butanol (DMBA) was allowed to react in toluene with isocyanate groups bound on surface. In the third step, carboxybetaines were formed in the surface through the ring-opening reaction between tertiary amine of DMEA or DMBA and beta-propiolactone (PL). It was characterized by ATR-FT-IR and XPS that the grafted surfaces were composed of carboxybetaine. The results of the contact angle measurements showed that they were strongly hydrophilic. Platelet adhesion tests showed that films grafted carboxybetaine have good blood compatibility, as featured by the low platelet adhesion.     

不同脱乙酰度对壳聚糖膜与角膜基质细胞相容性的影响

以分子量为30万．脱乙酰度分别为63．3％、73．7％、83％和97％的壳聚糖制备不同的壳聚糖膜，在不同脱乙酰度的壳聚糖膜上培养兔角膜基质细胞．通过观察角膜基质细胞在不同壳聚糖膜上的生长状态、贴附情况、生长曲线以及乳酸脱氢酶的活性，研究壳聚糖分子脱乙酰度对壳聚糖膜与角膜基质细胞生物相容性的影响。实验结果表明壳聚糖脱乙酰度越高。壳聚糖膜对细胞的损伤越小。越有利于细胞在膜上的生长和贴附，反之．低脱乙酰度的壳聚糖膜与角膜细胞的相容性较差。