Laser Florence Youth 2006 - Abstracts

Abstracts

Laser Florence Youth 2006 - Abstracts     

Laser Florence 2009

In this study, we compared the microleakage of composite fillings cured with halogen bulb, LED and argon ion laser (488 nm). Twenty-four extracted human molars were divided randomly in three groups. Six cavities were prepared on the coronal part of each tooth. Standard cavities (1.7 × 2 mm) were prepared. Cavities were acid etched, sealed with Scotch Bond 1 and filled by a hybrid composite. Cavities were exposed to one light source, thermocycled and immersed in a 2% methylene blue dye solution. Dye penetration in the leakage of cavities was recorded using a digital optical microscope. Mean values of percentage of dye penetrations in microleakages of cavities were 49.303 ± 5.178% for cavities cured with LED, 44.486 ± 6.075% with halogen bulb and 36.647 ± 5.936% for those cured by argon laser. Statistically significant difference exists between cavities cured by halogen vs LED (P < 0.01), halogen vs laser (P < 0.001) and LED vs laser (P < 0.001). The lowest microleakage was observed in the cavities and composites cured with argon ion laser.     

Laser Florence 2008

Patients sustaining acute myocardial infarction (AMI) often require urgent percutaneous revascularization within the first 24 h from onset of the infarction due to continuous ischemia and hemodynamic instability. Upon arrival to the cardiac catheterization, the electrocardiogram of AMI patients may exhibit acute ST-elevation (STEMI) with or without accompanying Q-wave or depression of the ST segment (non-STEMI or non-Q-wave infarction). Data comparing acute outcome of device application in patients presenting for urgent revascularization with established Q-wave myocardial infarction (QWMI) versus those with non-STEMI (NQMI) are sparse. Excimer laser is a revascularization modality applied for debulking of atherosclerotic plaque and vaporization of associated thrombus in the setting of AMI. One hundred fifty-one AMI patients with continuous chest pain and ischemia who enrolled into a multicenter study and underwent urgent revascularization were divided for the purpose of a retrospective analysis into two groups. One group presented with established electrocardiographic Q-wave, whereas the other had ST-depression (NQMI). In comparison with the NQMI group, the QWMI patients had a higher incidence of failed thrombolytic therapy (17% vs 3, p = 0.006), cardiogenic shock (20 vs 6%, p = 0.01), left anterior descending as a culprit infarct-related vessel (46 vs 14%, p < 0.0001), a higher incidence of TIMI 0 flow (48 vs 24%, p = 0.04), a heavier thrombus burden (grade 4 TIMI thrombus, 58 vs 23%; p = 0.0001), and higher CPK (1272 ± 2180 vs 404 ± 577, p = 0.001) and troponin levels (62 ± 95 vs 14 ± 48, p = 0.0003). Both groups underwent laser angioplasty and stenting for relief of continuous chest pain and ischemia within 24 h of infarction onset. Quantitative coronary arteriography in an independent core laboratory measured similar improvement in baseline minimal luminal diameter and percent diameter stenosis by application of laser energy in both groups. Among the QWMI patients, a significantly higher acute gain was recorded with the laser treatment in lesions containing a large/extensive thrombus burden as compared with lesions containing only a small clot burden (1.2 ± 0.7 vs 0.8 ± 0.5, p = 0.01). Such a phenomenon was not detected among the NQMI patients (1.0 ± 0.5 vs 0.8 ± 0.6, p=ns). Baseline TIMI flow grade (0.9 ± 1.0 for QWMI vs 1.5 ± 1.2 for NQMI, p = 0.0001) increased with laser emission to 2.8 ± 0.5 and subsequently reached a final level of TIMI 3 in both groups. In comparison with the QWMI patients, there was a trend toward a reduced rate of major adverse coronary events among the NQMI patients (12% QWMI vs 4% NQMI, p = 0.09). Significant differences in baseline clinical characteristics, extent of myocardial damage, location of infarct related vessel, thrombus burden, and TIMI flow exist between QWMI and NQMI patients who require urgent intervention. However, application of excimer laser results in similar high procedural success and low complication rates in both groups. Maximal acute laser gain is achieved among QWMI patients whose lesions are laden with a heavy thrombus burden.     

Laser Florence 2011

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D₁ threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D₁ and D₂ (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D₁ and D₂) and accuracy (at D₁) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D₁ and D₂), specificity and accuracy (both at D₁) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.     

Laser Florence 2010

Considering the increase in esthetic restorative materials and need for improvement in unsatisfactory restoration substitution with minimal inadvertent removal of healthy tissues, this study assessed the efficacy of erbium:yttrium–aluminum–garnet (Er:YAG) laser for composite resin removal and the influence of pulse repetition rate on the morphological analyses of the cavity by scanning electron microscope. Composite resin fillings were placed in cavities (1.0 mm deep) prepared in bovine teeth, and the 75 specimens were randomly assigned to five groups according to the technique used for composite filling removal (high-speed diamond bur, group I, as a control, and Er:YAG laser, 250 mJ output energy and 80 J/cm² energy density, using different pulse repetition rates: group II, 2 Hz; group III, 4 Hz; group IV, 6 Hz; group V, 10 Hz). After the removal, the specimens were split in the middle, and we analyzed the surrounding and deep walls to check for the presence of restorative material. The estimation was qualitative. The surfaces were examined with a scanning electron microscope. The results revealed that the experimental groups presented bigger amounts of remaining restorative material. The scanning electron microscopy (SEM) analyses showed irregularities of the resultant cavities of the experimental groups that increased proportionally with increase in repetition rate.