Development and Validation of RP-HPLC Method for Simultaneous Estimation of Cefpodoxime Proxetil and Dicloxacillin Sodium in Tablets

A simple, accurate, rapid and precise reversed-phase high-performance liquid chromatographic method has been developed and validated for simultaneous determination of cefpodoxime proxetil and dicloxacillin sodium in tablet. The chromatographic separation was carried out on kromasil C₁₈ analytical column (250×4.6 mm; 5 μm) with a mixture of acetonitrile:methanol:trifloroacetic acid (0.001%) with pH 6.5 (30:50:20, v/v/v) as mobile phase; at a flow rate of 1.0 ml/min. UV detection was performed at 235 nm. The dicloxacillin sodium and cefpodoxime proxetil were eluted at 1.92 and 3.35 min, respectively. The peaks were eluted with better resolution. Calibration plots were linear over the concentration range 0.5-20 μg/ml for cefpodoxime proxetil (r²=0.9996) and 5-50 μg/ml for dicloxacillin sodium (r²=0.9987). The method was validated for accuracy, precision, linearity and specificity. The method was very sensitive with limit of detection 0.0726, 0.3685 μg/ml and limit of quantification 0.220, 1.116 μg/ml for cefpodoxime proxetil and dicloxacillin sodium, respectively. The high recovery and low relative standard deviation confirm the suitability of the method for routine determination of cefpodoxime proxetil and dicloxacillin sodium in bulk drug and tablet dosage form.     

Formulation and Evaluation of Irinotecan Suppository for Rectal Administration

Irinotecan suppository was prepared using the moulding method with a homogeneous blend. A sensitive and specific fluorescence method was developed and validated for the determination of irinotecan in plasma using HPLC. The pharmacokinetics of intravenous administered and rectal administered in rabbits was investigated. Following a single intravenous dose of irinotecan (50 mg/kg), the plasma irinotecan concentration demonstrated a bi-exponential decay, with a rapid decline over 15 min. C_max, t_1/2, AUC_0–30h and AUC_0-∞ were 16.1 ± 2.7 g/ml, 7.6 ± 1.2 h, 71.3 ± 8.8 μg·h/ml and 82.3 ± 9.5 μg·h/ml, respectively. Following rectal administration of 100 mg/kg irinotecan, the plasma irinotecan concentration reached a peak of 5.3 ± 2.5 μg/ml at 4 h. The AUC_0–30h and AUC_0-∞ were 32.2 ± 6.2 μg·h/ml and 41.6 ± 7.2 μg·h/ml, respectively. It representing ∼50.6% of the absolute bioavailability.     

Development and Validation of a Liquid Chromatographic Method for Estimation of Dicyclomine Hydrochloride,Mefenamic Acid and Paracetamol in Tablets

Liquid chromatographic method was developed for simultaneous quantitative determination of dicyclomine hydrochloride, mefenamic acid and paracetamol in their combined dosage form. The separation was achieved using a C₁₈ column (250×4.6 mm id, 5 μm) using acetonitrile:20 mM potassium dihydrogen phosphate 70:30 (v/v) adjusted to pH 4 using orthophosphoric acid as mobile phase at a flow rate of 1 ml/min and detection at 220 nm. Separation was completed within 12 min. The retention times of dicyclomine hydrochloride, mefenamic acid and paracetamol were 3.8, 9.3 and 2.5 minutes respectively. The proposed method was found to have linearity in concentration range of 10–100 μg/ml for dicyclomine hydrochloride, 0.05-10 μg/ml for mefenamic acid and 0.1−20 μg/ml for paracetamol. The developed method has been statistically validated and was found to be simple, precise, reproducible and accurate. The developed and validated method was successfully used for the quantitative analysis of commercially available dosage form.     

Quality by Design Approach for Simultaneous Estimation of Doxycycline Hyclate and Curcumin by RP-HPLC Method

A simple, rapid, reliable, robust and optimized reversed phase high performance liquid chromatographic method for simultaneous estimation of doxycycline hyclate and curcumin was successfully developed and validated as per International Conference on Harmonization guidelines. The objective was achieved in terms of well separated peaks within 10 min on a Waters Sunfire C8 column with dimensions of 250×4.6 mm, particle size 5.0 μm using mobile phase consisting of 30 volumes of potassium dihydrogen phosphate buffer (50 mM) adjusted to pH 6.5±0.1 with triethylamine and 70 volumes of methanol at flow rate of 0.85 ml/min. The column effluents were monitored at 400 nm maintained at ambient column temperature (28^o). The developed method was found linear over the concentration range of 200-700 μg/ml for doxycycline hyclate and 8-28 μg/ml for curcumin, the detection and quantitation limit was found to be 26.063 and 78.97 μg/ml for doxycycline hyclate; 0.795 and 2.13 μg/ml for curcumin, respectively. The developed method was optimized using Minitab software version 16 to meet the current quality by design requirements. The method validation was done for linearity, range, detection and quantitation limit, accuracy, precision, specificity, system suitability testing, and robustness.     

Development and Validation of New HPLC Method for Simultaneous Estimation of L-Lysine Hydrochloride and L-Carnitine-L-Tartrate in Pharmaceutical Dosage Form

A new analytical method is developed and validates for simultaneous estimation of L-lysine hydrochloride and L-carnitine-L-tartrate in single pharmaceutical dosage form by means of high resolution HPLC. The chromatographic procedure was carried out using C₁₈-5 μm (4.6 mm × 250 mm), column. Optimally suited mobile phase was made to run in an isocratic elution mode whose composition was 10 mM of potassium dihydrogen phosphate adjusted with triethylamine to a pH of 7.5 and pumped at a flow rate of 0.50 ml/min through chromatographic system. The detector''s wavelength was 214 nm. The accuracy of the analytical method was determined keeping into account the recovery of analytes, which in this case remains well within the accepted standards that is 95-105%. Detection limit for L-lysine hydrochloride and L-carnitine-L-tartrate are 1.47 μg/ml and 0.85 μg/ml while quantitation limit for L-lysine hydrochloride and L-carnitine-L-tartrate is 4.41 and 2.55 μg/ml, respectively. All the statistical results were validated performing precision, accuracy, linearity, specificity studies for analytes concentration from 70-130%. The outcome of results confirmed that the method was in consonance with the acceptance criteria.     

A Validated RP-HPLC Method for the Estimation of Lapatinib in Tablet Dosage form using Gemcitabine Hydrochloride as an Internal Standard

A simple, selective, rapid, precise and economical reverse-phase high-performance liquid chromatography method has been developed for the determination of lapatinib in tablet using gemcitabine hydrochloride as an internal standard. Chromatography was carried out on an ODS C-18 RP column (4.6 mm i.d. ×250 mm) using a mixture of acetonitrile and water (50:50 v/v) as the mobile phase at a flow rate of 1.0 ml/min. The drug was monitored at 232 nm. The retention times for lapatinib and gemcitabine hydrochloride were found to be 4.25±0.05 and 6.10±0.05 min, respectively. The method produced linear responses in the concentration range of 2-60 μg/ml of lapatinib. The limit of detection and limit of quantitation were 0.265 and 0.884 μg/ml, respectively.     

Development and Validation of a Reversed-Phase High-performance Liquid Chromatography Method for Determination of Desmopressin in Chitosan Nanoparticles

A simple isocratic reversed-phase high performance liquid chromatographic method was developed for determination of released desmopressin from chitosan nanoparticles in the in vitro media. The chromatographic separation was achieved with acetonitrile/water (25:75, v/v), in which water contained 0.1% v/v trifluoroacetic acid with pH=2.5 as mobile phase, a Chromolith^® Performance RP-18e column (150×4.6 mm; 5 μm) kept at 40° and ultraviolet detection at 220 nm. The compound was eluted isocritically at a constant flow rate of 1.6 ml/min. The method was validated according to the International Conference on Harmonisation guidelines. The validation characteristics included accuracy, precision, linearity rang, selectivity, limit of detection, limit of quantitation and robustness. The calibration curve was linear (r>0.9999) over the concentration rang 0.5-100 μg/ml. The limit of detection and limit of quantitation in the release media were 0.05 and 0.5 μg/ml, respectively. The proposed method had an accuracy of and intra- and inter-day precision <4.2. Furthermore, to evaluate the performance of the proposed method, it was used in the analysis of desmopressin level in real samples containing chitosan nanoparticles in the in vitro media.     

Development and Validation of Stability-indicating RP-HPLC Method for Estimation of Pamabrom in Tablets

The present study depicts the development of a validated RP-HPLC method for the determination of the pamabrom in presence of degradation products or other pharmaceutical excipients. Stress study was performed on pamabrom and it was found that it degrade sufficiently in acidic, alkali and oxidative condition but less degradation was found in thermal and photolytic condition. The separation was carried out on Enable G 120 A⁰ (250×4.6 mm, 5 μ) column having particle size 5 μ using methanol: water (75:25 v/v) with pH 4.0 adjusted with ortho phosphoric acid as mobile phase at flow rate of 1 ml/min. The wavelength of the detection was 280nm. A retention time (R_t) nearly 3.9 min was observed. The calibration curve for pamabrom was linear (r² = 0.9997) from range of 10-60 μg/ml with limit of detection and limit of quantification of 1.41 μg/ml and 4.28 μg/ml, respectively. Analytical validation parameter such as selectivity, specificity, linearity, accuracy and precision were evaluated and relative standard deviation value for all the key parameters were less than 2.0%. The recovery of the drug after standard addition was found to be 101.35%. Thus, the developed RP-HPLC method was found to be suitable for the determination of pamabrom in bulk as well as stability samples of tablets containing various excipients.     

Stability-indicating High-performance Liquid Chromatography Method for Simultaneous Determination of Aminophylline and Chlorpheniramine Maleate in Pharmaceutical Formulations

The present work deals with the development and validation of method for simultaneous determination of antihistaminic drugs in pharmaceutical formulations. A precise, specific and accurate reverse phase-high-performance liquid chromatography method for the simultaneous measurement of aminophylline and chlorpheniramine maleate was developed. The separation of drugs was achieved on C-18 (5 μm, 250×4.6 mm) high-performance liquid chromatography column. The runtime for analysis was 10 min. Mobile phase is mixture containing dilute H₂SO₄:methanol (60:40% v/v) with flow rate adjusted at 1.5 ml/min. The detection of components was performed at a wavelength of 264 nm. Retention times of aminophylline and chlorphinramine maleate were found to be 2.00 and 3.25 min, respectively. Linearity was found in the range of 16-24 μg/ml for chlorpheniramine maleate and 102.4-153.6 μg/ml for aminophylline with a correlation coefficient of 0.9998 and 0.9996, respectively. High peak purity index of 99.99% indicated the complete separation of analytes in the presence of degradation products is justification of method stability. Linearity, accuracy, specificity, precision and robustness studies were performed for method validation.     

Stability-Indicating RP-HPLC Method for the Simultaneous Estimation of Doxofylline and Terbutalinesulphate in Pharmaceutical Formulations

An isocratic, stability-indicating, reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed for the quantitative determination of doxofylline and terbutaline sulphate, used for the treatment of respiratory problems. The chromatographic separation was achieved on a Zorbax-SB Phenyl 250 × 4.6mm × 5 μm column with the mobile phase consisting of a mixture of 25 mM ammonium acetate (pH 5.0) : acetonitrile (85:15 %v/v) at a flow rate of 1.0 ml/min. The eluate was monitored at 274 nm using a PDA detector. Forced degradation studies were performed on the bulk sample of doxofylline and terbutaline sulphate using acid (0.1N HCl), base (0.1N NaOH), oxidation (10% hydrogen peroxide), photolytic, and thermal degradation conditions. Good resolution was observed between the degradants and analytes. Degradation products resulting from the stress studies did not interfere with the detection of doxofylline and terbutaline sulphate, thus the assay is stability-indicating. The method has the requisite accuracy, selectivity, sensitivity, and precision for the simultaneous estimation of doxofylline and terbutaline sulphate in bulk and pharmaceutical dosage forms. The limit of quantitation and limit of detection were found to be 1.16 μg/ml and 0.38 μg/ml for doxofylline, 2.08 μg/ml and 0.62 μg/ml for terbutaline sulphate, respectively.     

Development and Validation of Stability-indicating HPLC Method for Simultaneous Estimation of Cefixime and Linezolid

A stability-indicating reverse phase high performance liquid chromatography method was developed and validated for cefixime and linezolid. The wavelength selected for quantitation was 276 nm. The method has been validated for linearity, accuracy, precision, robustness, limit of detection and limit of quantitation. Linearity was observed in the concentration range of 2-12 μg/ml for cefixime and 6-36 μg/ml for linezolid. For RP-HPLC, the separation was achieved by Phenomenex Luna C₁₈ (250×4.6 mm) 5 μm column using phosphate buffer (pH 7):methanol (60:40 v/v) as mobile phase with flow rate 1 ml/min. The retention time of cefixime and linezolid were found to be 3.127 min and 11.986 min, respectively. During force degradation, drug product was exposed to hydrolysis (acid and base hydrolysis), H₂O₂, thermal degradation and photo degradation. The % degradation was found to be 10 to 20% for both cefixime and linezolid in the given condition. The method specifically estimates both the drugs in presence of all the degradants generated during forced degradation study. The developed methods were simple, specific and economic, which can be used for simultaneous estimation of cefixime and linezolid in tablet dosage form.     

A new bioassay for glucagon

1 The relaxant action of glucagon has been studied in strips of rabbit renal arteries partially contracted by a low concentration (1 ng/ml) of noradrenaline.

2 The preparation was relaxed in a dose-dependent manner by concentrations of glucagon varying between 25 ng/ml and 420 ng/ml.

3 The relaxant effect of glucagon (0.1 μg/ml ED₆₀) on this preparation was not affected by propranolol (5.0 μg/ml), cimetidine (10 μg/ml), diphenhydramine (10 μg/ml), indomethacin (5.0 μg/ml), phentolamine (1.2 μg/ml), atropine (10 μg/ml) and 8-Leu-AT_II (1.0 μg/ml) but was slightly potentiated by Des-Arg⁹ Leu-OMe⁸-Bk (25 μg/ml) and indomethacin (50 μg/ml).

4 The dose-response curve to glucagon remained parallel in the presence of papaverine (2.5 μg/ml) but was shifted to the left by a factor of 2.5 to 2.8. Theophylline (250 μg/ml) also potentiated the vascular relaxation induced by glucagon.

5 Insulin (10 μg/ml) did not influence the relaxant effect of glucagon.

6 The removal of the N-terminal amino acid (His) of glucagon reduced by 89% the biological activity of this fragment on the vascular preparation. The removal of the C-terminal amino acids Met-27, Asn-28 and Thr-29 of glucagon resulted in a fragment which was inactive either as an agonist or as an antagonist when tested at concentrations as high as 925 ng/ml.

7 It is concluded that the relaxation of partially contracted strips of rabbit renal arteries by glucagon constitutes a simple, sensitive, relatively specific and reliable bioassay which may be useful for the determination of glucagon in biological materials and for structure-activity relationship studies with this hormone.

     

A new spectrophotometric method for the determination of methyldopa

A new, simple and low cost spectrophotometric method for the determination of methyldopa in pharmaceutical preparations was developed. The method was based on the coupling of methyldopa with 2,6-dichloroquinone-4-chlorimide (DCQ). The absorbance maximum (λ_max) of the resulted colored product was at 400 nm. Different buffers were used to determine the optimal pH for the reaction. About 1% w/v acetate buffer with pH 8.0 gave the optimal pH required for the reaction. Of the different solvents tried, water and ethanol were found to be the most suitable solvents. Beer’s law was obeyed in concentration range of 4–20 μg/ml methyldopa. The correlation coefficient was found to be (r = 0.9975). The limit of detection and limit of quantification were 1.1 μg/ml and 3.21 μg/ml, respectively. The reaction ratio between methyldopa and DCQ was studied and found to be 1:3. The work included the study of the possible interference of hydrochlorothiazide found in combination with methyldopa tablets. The method was validated and results obtained for the assay of two different brands of methyldopa tablets were compared with the BP method (colorimetric). The repeatability and reproducibility of the developed method were evaluated and the obtained results quoted. The derivative formed as a result of the reaction of methyldopa with DCQ was isolated and its possible mechanistic pathway was suggested.     

Development and Validation of Stability-indicating High Performance Liquid Chromatographic Method for the Estimation of Everolimus in Tablets

The present study depicts the development of a validated reversed-phase high performance liquid chromatographic method for the determination of the everolimus in presence of degradation products or pharmaceutical excipients. Stress study was performed on everolimus and it was found that it degrade sufficiently in oxidizing and acidic conditions but less degradation was found in alkaline, neutral, thermal and photolytic conditions. The separation was carried out on Hypersil BDS C18 column (100×4.6 mm, 5 μ) column having particle size 5 μ using acetate buffer:acetonitrile (50:50 v/v) with pH 6.5 adjusted with orthophosphoric acid as mobile phase at flow rate of 1 ml/min. The wavelength of the detection was 280 nm. A retention time (R_t) nearly 3.110 min was observed. The calibration curve for everolimus was linear (r²=0.999) from range of 25-150 μg/ml with limit of detection and limit of quantification of 0.036 μg/ml and 0.109 μg/ml, respectively. Analytical validation parameters such as selectivity, specificity, linearity, accuracy and precision were evaluated and relative standard deviation value for all the key parameters were less than 2.0%. The recovery of the drug after standard addition was found to be 100.55%. Thus, the developed RP-HPLC method was found to be suitable for the determination of everolimus in tablets containing various excipients.     

Development and Validation of an RP-HPLC Method for Quantitative Estimation of Eslicarbazepine Acetate in Bulk Drug and Tablets

A convenient, simple, accurate, precise and reproducible RP-HPLC method was developed and validated for the estimation of eslicarbazepine acetate in bulk drug and tablet dosage form. Objective was achieved under optimised chromatographic conditions on Dionex RP-HPLC system with Dionex C18 column (250×4.6 mm, 5 μm particle size) using mobile phase composed of methanol and ammonium acetate (0.005 M) in the ratio of 70:30 v/v. The separation was achieved using an isocratic elution method with a flow rate of 1.0 ml/ min at room temperature. The effluent was monitored at 230 nm using diode array detector. The retention time of eslicarbazepine acetate is found to be 4.9 min and the standard calibration plot was linear over a concentration range of 10-90 μg/ml with r²=0.9995. The limit of detection and quantification were found to be 3.144 and 9.52 μg/ml, respectively. The amount of eslicarbazepine acetate in bulk and tablet dosage form was found to be 99.19 and 97.88%, respectively. The method was validated statistically using the percent relative standard deviation and the values are found to be within the limits. The recovery studies were performed and the percentage recoveries were found to be 98.33± 0.5%.     

Simple HPLC-UV method for the quantification of metformin in human plasma with one step protein precipitation

This study presents the optimization of a simple HPLC-UV method for the determination of metformin in human plasma. Ion pair separation followed by UV detection was performed on deproteinized human plasma samples. The separation was carried out on a Discovery Reversed Phase C-18 column (250 × 4.6 mm, 5 μm) with UV detection at 233 nm. The mobile phase contained 34% acetonitrile and 66% aqueous phase. Aqueous phase contained 10 mM KH₂PO₄ and 10 mM sodium lauryl sulfate. Aqueous phase pH was adjusted to 5.2. The mobile phase was run isocratically. The flow rate of the mobile phase was maintained at 1.3 ml/min. The linearity of the calibration curve was obtained in the concentration range of 0.125–2.5 μg/ml and coefficient of determination (R²) was found to be 0.9951. The lowest limit of quantification and detection was 125 and 62 ng/ml respectively. No endogenous substances were found to interfere with the peaks of drug and internal standard. The intra-day and inter-day coefficient of variations was 6.97% or less for all the selected concentrations. The relative errors at all the studied concentrations were 5.60% or less. This method is time efficient and samples are easy to prepare with minimum dilution. So, it can be applied for monitoring metformin in human plasma.     

Stability-indicating RP-HPLC Method for the Simultaneous Determination of Sitagliptin and Simvastatin in Tablets

A new stability-indicating high-performance liquid chromatographic method for simultaneous analysis of sitagliptin and simvastatin in pharmaceutical dosage form was developed and validated. The mobile phase consisted of methanol and water (70:30, v/v) with 0.2 % of n-heptane sulfonic acid adjusted to pH 3.0 with ortho phosphoric acid was used. Retentions of sitagliptin and simvastatin were 4.3 min and 30.4 min, respectively with a flow rate of 1 ml/min on C₈ (Qualisil BDS, 250×4.6 mm, 5 μ). Eluents were detected at 253 nm using photodiode diode array detector. The linear regression analysis data for the linearity plot showed correlation coefficient values of 0.9998 and 0.9993 for sitagliptin and simvastatin, with respective concentration ranges of 20-150 μg/ml and 8-60 μg/ml. The relative standard deviation for inter-day precision was lower than 2.0%. The assay of sitagliptin and simvastatin was determined in tablet dosage form was found to be within limits. Both drugs were subjected to a variety of stress conditions such as acidic, basic, oxidation, photolytic, neutral and thermal stress in order to achieve adequate degradation. Results revealed that considerable degradation was found in all stress conditions except oxidative degradations. The method has proven specificity for stability indicating assay method.     

Evaluation of in vitro toxicity of peptide (N-acetyl-Leu-Gly-Leu-COOH)-substituted-β-cyclodextrin derivative,a novel drug carrier,in PC-12 cells

Background

Cyclodextrins (CDs) have been shown to improve physicochemical and biopharmaceutical properties of drugs when low solubility and low safety limit their use in the pharmaceutical field. Recently, a new amphiphilic peptide-substituted-β-CD, hepta-(N-acetyl-Leu-Gly-Leu)-β-CD (hepta-(N-acetyl-LGL)-β-CD), is developed which exhibited good solubility, strong inclusion ability and an appropriate average molecular weight. However, there is limited information available about its toxic effects. This study was designed to evaluate cytotoxic effects of the hepta-(N-acetyl-LGL)-β-CD (50, 200, 400, and 800 μg/ml) on rat pheochromocytoma PC-12 cells.

Results

A significant reduction of cell viability with IC₅₀ values of 1115.0 μg/ml, 762.4 μg/ml, and 464.9 μg/ml at 6, 12, and 24 h post-treatment, respectively, as well as increased lipid peroxide levels and DNA damage were observed.

Conclusions

In conclusion, hepta-(N-acetyl-Leu-Gly-Leu)-β-CD exhibit significant toxic properties at high concentrations, probably through induction of oxidative stress and genotoxicity.     

Nanoprecipitation is more efficient than emulsion solvent evaporation method to encapsulate cucurbitacin I in PLGA nanoparticles

Cucurbitacin I is a hydrophobic molecule that exerts a degree of polarity, which is expected to complicate its loading in PLGA nanoparticles by the classical emulsion solvent evaporation technique. In the current study, variants of emulsion solvent evaporation method were used to prepare PLGA nanoparticles of cucurbitacin: CI-NP1 (single emulsion starting with 1000 μg drug), CI-NP2 (double emulsion starting with 250 μg drug), and CI-NP3 (double emulsion starting with 500 μg drug). On the other hand, CI-NP4 was prepared by nanoprecipitation (starting with 1000 μg drug). In CI-NP1, cucurbitacin I encapsulation efficiency (EE) was 1.29%. The employment of double emulsion, in CI-NP2 and CI-NP3, increased cucurbitacin I EE to 4.8% and 7.96%, respectively. Nanoprecipitation significantly increased the EE of cucurbitacin I to 48.79% in CI-NP4. It is likely that cucurbitacin I escapes with the organic solvent after the emulsification step to the aqueous phase leading to ineffective entrapment in the polymeric matrix. Avoiding emulsification seems efficient in increasing cucurbitacin I disposition in the instantly-precipitating NPs. Therefore, nanoprecipitation method increases cucurbitacin I entrapment in PLGA NPs and possibly other water-insoluble polar drugs.     

Development and Validation of Reversed-Phase High Performance Liquid Chromatographic Method for Hydroxychloroquine Sulphate

In the present work new, simple reversed-phase high performance liquid chromatographic method was developed and validated for the determination of hydroxychloroquine sulphate in blood plasma. Chloroquine sulphate was used as an internal standard. The chromatographic separation was achieved with octadecyl silane Hypersil C₁₈ column (250×6 mm, 5 μm) using water and organic (acetonitrile:methanol: 50:50, v/v) mobile phase in 75:25 v/v ratio, with sodium 1-pentanesulfonate and phosphoric acid. This organic phase was maintained at pH 3.0 by orthophosphoric acid. The flow rate of 2.0 ml/min^. with detection at 343 nm was used in the analysis. The calibration curve of standard hydroxychloroquine sulphate was linear in range 0.1-20.0 μg/ml. The method was validated with respected to linearity, range, precision, accuracy, specificity and robustness studies according to ICH guidelines. The method was found to be accurate and robust to analyze the hydroxychloroquine sulphate in plasma samples.