A 2-year prospective study on immediate loading with fluoride-modified implants in the edentulous mandible

Objectives: Chemically modified surfaces were introduced during the last decade to improve indications for implant treatment. The fluoride‐modified implant (Osseospeed^®) was launched in 2004 and clinical studies suggest a more rapid bone formation and stronger bone to implant contact. However, limited clinical data are available on marginal bone loss and the outcome after >1 year under immediate loading conditions is not fully understood. Hence, the purpose of this prospective study was to present implant survival and marginal bone level data when fluoride‐modified implants are supporting a fully functional rehabilitation from the day after surgery in the completely edentulous mandible. Materials and methods: Twenty‐five patients, completely edentulous in the mandible, were consecutively treated with five fluoride‐modified implants that were functionally loaded with a provisional screw retained restoration. Marginal bone loss was measured from day of surgery to 3, 6, 12 and 24 months. Implants were considered successful after 24 months if radiographic bone loss did not exceed 1 mm and no pain or mobility was caused under a torque of 20 N cm. Statistical analysis was carried out on both patient and implant levels. Results: All implants survived and mean bone loss on implant level after 3, 6, 12 and 24 months was 0.14, 0.13, 0.11 and 0.11 mm, respectively. Bone loss was only statistically significant between baseline and 3 months (P<0.001) and remained unchanged afterward. None of the implants lost >1 mm of bone after 2 years. On the patient level, the mean bone loss after 2 years was 0.12 mm (SD 0.14; range ?0.06 to 0.55) with probing pocket depth 2.45 mm (SD 0.43; range 1.3–3.1) and bleeding index 0.55% (SD 0.34; range 0–1). Conclusion: Immediate loading of fluoride‐modified implants is a predictable treatment yielding a high survival and success rate after 2 years. To cite this article:
Collaert B, Wijnen L, De Bruyn H. A 2‐year prospective study on immediate loading with fluoride‐modified implants in the edentulous mandible.
Clin. Oral Impl. Res. 22 , 2011; 1111–1116.
doi: 10.1111/j.1600‐0501.2010.02077.x     

Immediate and early loading of Straumann implants with a chemically modified surface (SLActive) in the posterior mandible and maxilla: 1-year results from a prospective multicenter study

Objective: Immediate and early loading of implants can simplify treatment and increase patient satisfaction. This 3‐year randomized‐controlled trial will therefore evaluate survival rates and bone‐level changes with immediately and early loaded Straumann implants with the SLActive surface. Material and methods: Partially edentulous patients ≥18 years of age were enrolled. Patients received a temporary restoration (single crown or two to four unit fixed partial denture) out of occlusal contact either immediately (immediate loading) or 28–34 days later (early loading group), with permanent restorations placed 20–23 weeks after surgery. The primary endpoint was change in crestal bone level from baseline (implant placement) to 12 months; the secondary variables were implant survival and success rates. Results: A total of 383 implants (197 immediate and 186 early) were placed in 266 patients; 41.8% were placed in type III and IV bone. The mean patient age was 46.3±12.8 years. Four implants failed in the immediate loading group and six in the early loading group, giving implant survival rates of 98% and 97%, respectively (P=NS). There were no implant failures in type IV bone. The overall mean bone level change from baseline to 12 months was 0.77±0.93 mm (0.90±0.90 and 0.63±0.95 mm in the immediate and early groups, respectively; P<0.001). However, a significant difference in implantation depth between the two groups (P<0.0001) was found. After adjusting for this slight difference in initial surgical placement depth, time to loading no longer had a significant influence on bone‐level change. Significant influence was found for: center (P<0.0001), implant length (P<0.05) and implant position (P<0.0001). Bone gain was observed in approximately 16% of implants. Conclusions: The results demonstrated that Straumann implants with the SLActive surface are safe and predictable when used in immediate and early loading procedures. Even in poor‐quality bone, survival rates were comparable with those from conventional or delayed loading. The mean bone‐level change was not deemed to be clinically significant and compared well with the typical bone resorption observed in conventional implant loading.     

Parallel screw cylinder implants: comparative analysis between immediate loading and two-stage healing of 1,005 dental implants with a 2-year follow up

Background Recently, several authors have focused on the possibility of an immediate functional loading of dental implants to minimize the delay between surgical and prosthetic phases. Purpose The aim of this study was a reevaluation of the XiVE® dental implant (Dentsply‐Friadent, Mannheim, Germany) with: (1) a longer follow‐up period; (2) a higher number of fixture; and (3) a proper statistical method. Materials and Methods In July 2001 and December 2002, 371 patients (180 males and 191 females; ages ranging from 17 to 83; mean age, 53 years) were consecutively enrolled in this study. In 371 patients, a total of 1005 XiVE dental implants were distributed as follows: 484 immediately loaded implants (test group) were inserted in 130 patients, whereas 521 unloaded implants were inserted in 241 patients (control group). Results The implant survival was 98.7 and 99.4% in immediate loading and control group, respectively. Univariate analysis showed no statistically significant difference between the two groups. Conclusion In a previous report, we showed that immediate loading offered a predictable and reliable procedure also for XiVE implants, at least in the short period. In this study, we confirmed the results of the previous study and added information regarding the survival rate and marginal bone level stability with a 2‐year follow up.     

Comparative analysis of immediate functional loading and immediate nonfunctional loading to traditional healing periods: a 5-year follow-up of 550 dental implants

Background: Clinical, radiographical, and histological findings have shown that immediately loaded implants show the presence of mineralized tissues at the interface.
Purpose: The aim of this study was to compare an immediate loading protocol with a two-staged one using an implant with a square thread design.
Materials and Methods: One hundred fifty-five consecutive patients (71 men, 84 women), aged between 18 and 78 years (mean: 54 years) participated in this study. A total of 550 implants (Maestro; BioHorizons, Birmingham, AL, USA) were inserted. In group A, 264 implants were inserted in 82 patients with immediate functional loading with occlusal contact if the patients were completely edentulous, or with immediate nonfunctional loading without occlusal contact if the patients were partially edentulous. In group B, 286 implants were inserted in 73 patients with a one-stage or two-stage surgical procedure. All patients were followed for at least 5 years.
Results: In the immediately loaded implants group, three implants failed, all in posterior mandibular sites, with an overall 98.8% 5-year survival rate. In the control group, no implant failed, with a 100% 5-year survival rate. No statistically significant differences were found in the survival rates of the implants in the two groups.
Discussion: A very high implant survival rate was also present in our series for the immediately loaded implants. All the three failed implants were retrieved from the same patient, who had poor oral hygiene, after a loading period of 5 years. These data can suggest that, from a clinical point of view, an abbreviated healing period is compatible with the development and maintenance over a longer time period (5 years) of mineralized tissues at the interface with dental implants.
Conclusion: We can then conclude that shorter healing periods can be highly satisfactory from a clinical point of view.     

Immediate and early non-occlusal loading of Straumann implants with a chemically modified surface (SLActive) in the posterior mandible and maxilla: interim results from a prospective multicenter randomized-controlled study

Objective: Immediate and early loading of dental implants can simplify treatment and increase overall patient satisfaction. The purpose of this 3‐year prospective randomized‐controlled multicenter study was to assess the differences in survival rates and bone level changes between immediately and early‐loaded implants with a new chemically modified surface (SLActive). This investigation shows interim results obtained after 5 months. Material and methods: Patients ≥18 years of age missing at least one tooth in the posterior maxilla or mandible were enrolled in the study. Following implant placement, patients received a temporary restoration either on the day of surgery (immediate loading) or 28–34 days after surgery (early loading); restorations consisted of single crowns or two to four unit fixed dental prostheses. Permanent restorations were placed 20–23 weeks following surgery. The primary efficacy variable was change in bone level (assessed by standardized radiographs) from baseline to 5 months; secondary variables included implant survival and success rates. Results: A total of 266 patients were enrolled (118 males and 148 females), and a total of 383 implants were placed (197 and 186 in the immediate and early loading groups, respectively). Mean patient age was 46.3±12.8 years. After 5 months, implant survival rates were 98% in the immediate group and 97% in the early group. Mean bone level change from baseline was 0.81±0.89 mm in the immediate group and 0.56±0.73 mm in the early group (P<0.05). Statistical analysis revealed a significant center effect (P<0.0001) and a significant treatment × center interaction (P=0.008). Conclusions: The results suggested that Straumann implants with an SLActive can be used predictably in time‐critical (early or immediate) loading treatment protocols when appropriate patient selection criteria are observed. The mean bone level changes observed from baseline to 5 months (0.56 and 0.81 mm) corresponded to physiological observations from other studies, i.e., were not clinically significant. The presence of a significant center effect and treatment × center interaction indicated that the differences in bone level changes between the two groups were center dependent.     

Early loading of endosseous implants in the augmented maxilla: a 1-year prospective study

In 10 patients, 68 endosseous implants were inserted in the augmented edentulous maxilla using a one-stage implant placement technique. Three months before implant insertion, the width and height of the alveolar crest were augmented with autologous bone grafts from the iliac crest. In all cases, the resulting bone volume was sufficient for implant insertion. According to an early loading protocol, the implant-supported overdenture was fabricated 2 months after insertion of the implants. Evaluation was performed according to a standardised protocol immediately and 1 year after fabrication of the prosthetic construction. The protocol included assessment of both clinical (bleeding score, pocket depth, implant mobility) and radiographic (marginal bone level on standardised radiographs) parameters. Three implants in two patients in the upper jaw were lost (survival rate: 95.6%). The peri-implant tissues had a healthy appearance and bone loss was minimal. Overall, the patients were very satisfied with the prosthetic construction. From this preliminary study, it is concluded that in selected cases, early loading of implants may develop into a predictable treatment modality after augmentation of the maxilla.     

Direct loading of Nobel Direct and Nobel Perfect one-piece implants: a 1-year prospective clinical and radiographic study

OBJECTIVES: The aim of this prospective study was to evaluate the Nobel Direct and Nobel Perfect one-piece implants (OPIs) when used for immediate function. MATERIAL AND METHODS: Forty-eight patients were provided with 115 OPIs for loading with a provisional crown or a bridge within 24 h and followed for at least 12 months with clinical and radiographic examinations. A group of 97 patients previously treated under identical conditions by the same team with 380 two-piece implants (TPIs) for immediate loading in the mandible and maxilla served as the reference group. RESULTS: Six (5.2%) OPIs failed during the follow-up due to extensive bone loss. Five (1.3%) implants failed in the reference group. After 1 year, the mean marginal bone loss was 2.1 mm (SD 1.3) for OPIs and 0.8 mm (SD 1) for TPIs. 20% of OPIs showed more than 3 mm of bone loss compared with 0.6% for TPIs. When compensating for vertical placement depth, OPIs still showed a lower marginal bone level and thus more exposed threads than TPIs. Depending on the criteria used, the success rate for OPIs was 46.1% or 72.2% compared with 85% or 91.6% for TPIs. CONCLUSIONS: The Nobel Direct and Nobel Perfect OPIs show lower success rates and more bone resorption than TPIs after 1 year in function. Factors such as implant design, insertion depth, rough surface towards the mucosa, in situ preparation and immediate loading may have an influence on the clinical outcome.     

Immediate loading of single-tooth ITI implants in the anterior maxilla: a prospective 5-year pilot study

The aim of the present study was to evaluate the success rate of immediately loaded single-tooth ITI solid plasma-sprayed (TPS) implants in the maxilla. Eight implants were loaded immediately after placement in eight different patients, and were followed for five years. Temporary acrylic resin restorations, which were fabricated from impressions that were taken immediately after implant placement, were connected one week later. These temporary restorations were adjusted in order to avoid any direct occlusive contacts. After six months, the provisional crowns were replaced by definitive ceramic crowns. Regular follow-ups were performed during the investigation period. No implants were lost, and the mean marginal bone level for the eight implants increased by 0.53 mm (range - 0.83 to + 1.54 mm) from placement to the final examination. Only minor complications were noted, and overall patient satisfaction was high.     

Early loading of non-submerged titanium implants with a sandblasted and acid-etched surface. 5-year results of a prospective study in partially edentulous patients

OBJECTIVES: The aim of this prospective cohort study was to evaluate the success rate of titanium screw-type implants with the sandblasted and acid-etched (SLA) surface loaded early, after 6 weeks of healing. MATERIAL AND METHODS: A total of 104 implants were inserted into posterior sites of 51 partially edentulous patients exhibiting bone densities of class I-III. After a healing period of 6 weeks, all implants were functionally loaded with cemented crowns or fixed partial dentures. The patients were recalled at 3, 12, 24, 36, 48 and 60 months for clinical and radiographic examination. RESULTS: One implant failed to integrate during healing, and three implants were lost to follow-up and were considered drop-outs. The remaining 100 implants showed favorable clinical and radiographic findings at the 5-year examination. The peri-implant soft tissues were stable over time; the mean probing depths and mean attachment levels did not change during the follow-up period. None of the radiographs exhibited signs of continuous peri-implant radiolucency, which confirmed ankylotic stability for all 100 implants. The measurement of the bone crest levels (DIB values) indicated stability as well. Based on strict success criteria, all 100 implants were considered successfully integrated, resulting in a 5-year success rate of 99%. CONCLUSION: This prospective study using an early loading protocol with 6 weeks of healing demonstrated that titanium implants with the SLA surface can achieve and maintain successful tissue integration with high predictability for at least 5 years of follow-up in selected patients and sites.     

Bone level changes around axial and tilted implants in full-arch fixed immediate restorations. Interim results of a prospective study

Purpose: The aim of this prospective study was to assess clinical outcomes and peri‐implant bone level changes around tilted and axial implants supporting full‐arch fixed immediate rehabilitations up to 60 months of loading. Material and Methods: Forty‐seven patients (22 women and 25 men) were included in the study. Each patient received a full‐arch fixed bridge supported by two axial and two distal tilted implants. Loading was applied within 48 hours of surgery. Patients were scheduled for follow‐up at 6, 12, 18, 24 months, and annually up to 5 years. At each follow‐up, plaque level and bleeding scores were assessed and radiographic evaluation of marginal bone level change was performed. Periapical radiographs were taken using a paralleling technique, and subsequently scanned at 600 dpi. An image analysis software was used to assess bone level. Results: A total of 33 mandibles and 16 maxillae were rehabilitated (two patients received a fixed prosthesis in both arches). One hundred ninety‐six Nobel Biocare implants of 4 mm diameter were placed. The mean follow‐up duration was 52.8 months (range 30–66 months) in the mandible, and 33.8 months (range 22–40 months) in the maxilla. All subjects attended the scheduled follow‐up visits. No implant was lost. No significant difference in marginal bone loss was found between axial and tilted implants in both jaws, at each follow‐up. No significant difference in bone loss was found between mandible and maxilla, for both axial and tilted implants at each comparable time frame, although slightly higher mean values were always found for the mandible. Conclusion: The use of tilted implants in the immediate rehabilitation of fully edentulous jaws is safe and is not associated to a higher marginal bone loss as compared to axially placed implants.     

Stability, marginal bone loss and survival of standard and modified sand-blasted, acid-etched implants in bilateral edentulous spaces: a prospective 15-month evaluation

Objectives: Chemical modification of the already proven sand‐blasted and acid‐etched (SLA) implant had increased its surface wettability and consequent early‐term osseointegration characteristics. The aim of this clinical trial was to compare the stability changes, success, survival, peri‐implant parameters and marginal bone loss (MBL) of the early‐loaded standard (SLA) and modified sand‐blasted, acid‐etched (modSLA) implants. Material and methods: A total of 96 SLA and modSLA implants were placed in a bi‐lateral, cross‐arch position to the jaws of 22 patients. Resonance frequency analysis (RFA) was used to measure the implant stability in the surgery and following healing after 1, 3 and 6 weeks. At the stage of loading, a panoramic X‐ray was obtained and RFA measurement was repeated for all implants. Implants were restored by metal–ceramic crowns and followed for 1 year to determine the success, survival rate, peri‐implant parameters and MBL. Results were compared by one‐ and two‐way ANOVA, log‐rank test and generalized linear mixed models (P<0.05). Results: One modSLA implant was lost after 3 weeks following the surgery yielding to a 100 and 97.91% success rate for SLA and modSLA implants, respectively (P=0.323). At the loading stage, modSLA implants showed significantly lower MBL (0.18 ± 0.05 mm) than SLA implants (0.22 ± 0.06 mm; P=0.002). In the loading stage, RFA value of the modSLA implants (60.42 ± 6.82) was significantly higher than the both implant types in the surgical stage (55.46 ± 8.29 and 56.68 ± 8.19), and following 1 (56.08 ± 7.01 and 55.60 ± 9.07) and 3 weeks of healing (55.94 ± 5.95 and 55.40 ± 6.50 for SLA and modSLA implants, respectively). Conclusions: modSLA implants demonstrated a better stability and a reduced MBL at the loading stage. Both SLA and modSLA implants demonstrated a favorable success and survival at the end of 15‐month follow‐up. To cite this article :
Karabuda ZC, Abdel‐Haq J. Arιsan V. Stability, marginal bone loss and survival of standard and modified sand‐blasted, acid‐etched implants in bilateral edentulous spaces: a prospective 15‐month evaluation.
Clin. Oral Impl. Res. 22 , 2011; 840–849
doi: 10.1111/j.1600‐0501.2010.02065.x     

A prospective,multi‐center study assessing early loading with short implants in posterior regions. A 3‐year post‐loading follow‐up study

Background

Few prospective studies about early loading of short implant have been available and very little evidence exists on the outcomes longer than 3 years.

Purpose

To assess clinical and radiographic outcomes of 6 mm‐short implants placed in the posterior maxilla and mandible applying an early loading protocol.

Materials and methods

Ninety‐five short implants (6 mm‐short, Ø 4 mm) were placed in 45 subjects at 3 study sites, 2 or 3 implants per subject, using a one‐stage surgical procedure and loaded with a screw‐retained splinted fixed prosthesis 6 weeks later. Follow‐up took place at 6, 12, 24, and 36 months after loading. Marginal bone level changes, implant survival, clinical variables, and adverse events were assessed.

Results

The survival rate for all implants placed was 95.8%. From implant loading to 3 years follow‐up, mean marginal bone level changes were minimal (0.07 ± 0.49 mm) and the peri‐implant soft tissue status was healthy. No major technical or biological complications occurred except for the 4 early implant losses.

Conclusion

Three‐year data indicates that the use of splinted 6 mm‐short implants is a viable treatment in posterior regions with low marginal bone resorption. Early loading after 6 weeks should be taken cautiously in patients with known risk factors.     

Implant-retained mandibular overdentures with immediate loading: a 3- to 8-year prospective study on 328 implants

Purpose: The purpose of this study is to evaluate prospectively survival and success rates of implants placed in the inter‐foraminal area of edentulous mandibles and immediately loaded with an implant‐supported overdenture. Materials and Methods: Eighty‐two patients, 33 males and 49 females, aged between 42 and 87 years (mean age 58.6 yr), presenting edentulous mandibles were rehabilitated with an implant‐supported overdenture in the mandible. Three hundred twenty‐eight screw‐type osseointegrated implants (164 Ha‐Ti, Mathys Dental, Bettlach, Switzerland; 84 ITI Dental Implant System, Straumann Institute, Waldenburg, Switzerland; 40 Brånemark Conical, Nobel Biocare AB, Gothenburg, Sweden; 40 Frialoc, Friatec, AG Mannheiti, Germany), were placed in the intraforaminal area of the mental symphysis (4 implants per patient). Immediately after implant placement, a U‐shaped gold or titanium bar was fabricated and implants were rigidly connected with the bar and immediately loaded with an implant‐retained overdenture. Success rate of implants was evaluated clinically and radiographically every year after the loading of the prostheses according to the following parameters: (1) absence of clinical mobility of implants tested individually after bar removal, (2) absence of periimplant radiolucency evaluated on panoramic radiographs, (3) absence of pain and radiologic or clinical signs of neural lesion, and (4) peri‐implant bone resorption mesial and distal to each implant less than 0.2 mm after the first year of prosthetic load. Results: Of 328 implants placed, 296 were followed up from a minimum of 36 months to a maximum of 96 months, with a mean follow‐up of 62 months. Seven implants in 6 different patients were removed owing to loss of osseointegration, whereas 18 implants, although still osseointegrated, did not fulfill success criteria due to bone resorption > 0.2 mm/year after the first year of loading. Despite implant losses, all patients maintained their bars supporting overdentures, although in 6 patients they were supported by 3 instead of 4 implants. The only patient who lost 2 implants received 2 new implants, which survived normally. Therefore, the absolute success and survival rates were 91.6% and 97.6%, respectively, whereas the cumulative survival and success rates of implants obtained with a life table analysis were 96.1% and 88.2%, respectively. Conclusions: Results of this study seem to demonstrate that survival and success rates of immediately loaded implants placed in the intraforaminal area of the mandible and rigidly connected with a bar through an implant‐supported over‐denture are consistent with those reported in the international literature as far as delayed loading is concerned after 3 years of loading. After longer observation times, this study demonstrated that, while survival rates of implants and bar‐supported overdentures are still consistent with results published in the international literature pertaining to delayed loading, a moderate decrease in success rates of implants was found. Nevertheless, it must be stressed that this decrease (88.8 and 90.4% after a 7‐ to 8‐year observation period for Ha‐Ti and ITI implants) is related only to two implant systems; no data are available for the other two implant systems because of the shorter follow‐up period.     

Immediate functional loading of implants in single tooth replacement: a prospective clinical multicenter study

Objectives: The aim of the present study was to evaluate the outcome of immediate functional loading of implants in single-tooth replacement using two different installation procedures.
Material and Methods: One hundred and fifty-one subjects, who required single-tooth rehabilitation in the area of 15–25 and 35–45, were enrolled in eight private clinics in Italy. The implant sites were randomly allocated to one of the following treatment groups. In the control group, in which a standard preparation procedure for implant placement and submerged healing of the implant was used, abutment connection and loading of the implants were performed 3 months after installation. In the test group 1, a standard preparation procedure for the implant placement and immediate functional loading of implant was carried out. In the test 2 group, however, a modified implant installation procedure (osteotome technique) was used followed by immediate functional loading of the implant. Clinical and radiographic examinations were performed at 3 and 12 months of follow-up at all sites.
Results: Three implants (5.5%) from the test 2 group (osteotome preparation) and one (2%) from the test 1 group (conventional drill preparation) failed to integrate and were removed one and three months after implant installation. The mean marginal bone loss assessed at 12 months was 0.31 mm (test 1), 0.25 mm (test 2) and 0.38 mm (control) (no statistically significant differences were found between the three treatment groups.)
Conclusion: It is suggested that immediate functional loading of implants that are placed with a conventional installation technique and with sufficient primary stability may be considered as a valid treatment alternative in a single-tooth replacement.     

Immediate loading of mandibular overdentures supported by unsplinted direct laser metal-forming implants: results from a 1-year prospective study

Background: At present, only some studies have dealt with immediate loading of unsplinted implants supporting mandibular overdentures. The aim of this prospective study is to evaluate treatment outcomes of mandibular overdentures supported by four one‐piece, unsplinted, immediately loaded, direct laser metal‐forming (DLMF) implants by assessing implant survival rate, implant success, marginal bone loss, and prosthetic complications. Methods: A total of 96 one‐piece DLMF implants were inserted in the edentulous mandible of 24 patients. Four implants were placed in each edentulous mandible. Immediately after implant placement, a mandibular overdenture was connected to the implants. At 1‐year follow‐up, clinical, radiographic, and prosthetic parameters were assessed. Success criteria included absence of pain, suppuration, and implant mobility; absence of continuous peri‐implant radiolucency; and distance between the implant shoulder and the first visible bone contact <1.5 mm. Results: After a 1‐year loading time, the overall implant survival rate was 98.9%, with only one implant lost. Among the surviving 95 implants, two did not fulfill the success criteria; therefore, the implant success rate was 97.8%. The mean distance between the implant shoulder and the first visible bone contact was 0.28 ± 0.30 mm (95% confidence interval, 0.24 to 0.32). Some prosthetic complications were reported. Conclusion: Based on the present results and within the limits of this study, the immediate loading of four unsplinted DLMF implants by means of ball attachment–supported mandibular overdentures seems to represent a safe and successful procedure.