Preparation and pharmacokinetics evaluation of oral self-emulsifying system for poorly water-soluble drug Lornoxicam

Abstract

The present work was performed aiming to develop a new solid self-emulsifying system (SMEDDS) for poorly water-soluble drug Lornoxicam and evaluate the bioavailability in Wister rats by oral gavage. Liquid SMEDDS of Lornoxicam was formulated with Labrafil M 1944 CS as oil phase, Kolliphor HS 15 as a surfactant and Transcutol HP as a cosurfactant after screening various vehicles. The microemulsion system selected from the phase diagram and optimized by central composite design (CCD) response surface method was transformed into solid-SMEDDS (S-SMEDDS) by lyophilization using sucrose as cryoprotectant. The formulations were further characterized by the particle size, poly dispersity index (PDI), self-emulsifying time, zeta potential, transmission electron microscope (TEM), differential scanning calorimeter (DSC), in vitro drug release and in vivo pharmacokinetics. Results of DSC studies confirmed that the drug was incorporated in the S-SMEDDS. The in vitro drug release from Lornoxicam SMEDDS was found to be greatly higher in comparison with that from the commercial tablets. It was indicated that SMEDDS might be effective in reducing the effect of pH variability of Lornoxicam and improving the release performance of Lornoxicam. HPLC system was applied to study the concentration of Lornoxicam in the plasma of the Wister rats after oral administration of Lornoxicam SMEDDS and Lornoxicam commercial tablets. The pharmacokinetics parameters of the rats were C_max 1065.91?±?224.90 and 1855.22?±?748.25?ngmL^?1, T_max were 2.5?±?0.4?h and 1.8?±?0.5?h, and AUC_0～t were 5316.35?±?323.62 and 7758.07?±?241.57?ngmL^?1?h, respectively. Calculated by AUC_0～∞, the relative bioavailability of Lornoxicam S-SMEDDS was 151.69?±?15.32%. It suggested that this S-SMEDDS could be used as a successful oral solid dosage form to improve the solubility and bioavailability of poorly water-soluble drug Lornoxicam as well.     

紫杉醇超饱和自微乳化给药系统的制备及大鼠体内药动学研究

目的:制备紫杉醇超饱和自微乳化给药系统(supersaturatable self-microemulsifying drug delivery system,S-SMEDDS),并对其在大鼠体内的药动学进行研究。方法:采用伪三元相图的方法,优化紫杉醇自微乳化给药系统(SMEDDS)的处方。18只大鼠随机分为3组,分别灌胃给予10 mg/kg紫杉醇溶液、SMEDDS和S-SMEDDS,测定紫杉醇的血药浓度c、max、AUC和tmax,计算相对生物利用度。结果:确定紫杉醇SMEDDS最优处方为:油相∶表面活性剂∶助表面活性剂=50∶33∶17。油相为Lauroglycol FCC∶橄榄油(2∶1),表面活性剂为Cremophor EL∶吐温-80(1∶1),助表面活性剂为PEG-400。S-SMEDDS在此处方基础上添加5%羟丙基甲基纤维素。稀释对制剂的粒径无显著影响。SMEDDS和S-SMEDDS的粒径分别为(92.7±47.7)和(93.6±36.8)nm,粒径分布呈高斯分布。SMEDDS和S-SMEDDS的cmax和AUC显著高于溶液剂,tmax<溶液剂,生物利用度分别为333.9%和719.3%。结论:紫杉醇S-SMEDDS的口服吸收强于溶液剂和SMEDDS。     

口服固体自微乳化给药系统的研究进展

目的对新近发展的固体自微乳化给药系统（S-SMEDDS）文献进行综述。方法查阅近年国内外相关文献并进行归纳和总结。结果对固体自微乳的载体、固化技术以及缓控释制剂进行了探讨,为研究水难溶性药物的生物利用度及适合药物释放特性的S-SMEDDS技术提供相关参考。结论固体自微乳化系统可以显著提高难溶性药物的口服生物利用度,且兼顾了液态自微乳和固体制剂二者的优势,是一个极具潜力的新型制剂。     

Self-microemulsifying drug delivery system for improved oral bioavailability of dipyridamole: Preparation and evaluation

Dipyridamole shows poor and variable bioavailability after oral administration due to pHdependent solubility, low biomembrane permeability as well as being a substrate of P-glycoprotein. In order to improve the oral absorption of dipyridamole, a self-microemulsifying drug delivery system (SMEDDS) for dipyridamole was prepared and evaluated in vitro and in vivo. The optimum formulation was 18% oleic acid, 12% Labrafac lipophile WL 1349, 42% Solutol HS 15 and 28% isopropyl alcohol. It was found that the performance of self-microemulsification with the combination of oleic acid and Labrafac lipophile WL 1349 increased compared with just one oil. The results obtained from an in vitro dissolution assay indicated that dipyridamole in SMEDDS dissolved rapidly and completely in pH 6.8 aqueous media, while the commercial drug tablet was less soluble. An oral bioavailability study in rats showed that dipyridamole in the SMEDDS formulation had a 2.06-fold increased absorption compared with the simple drug suspension. It was evident that SMEDDS may be an effective approach to improve the oral absorption for drugs having pH-dependent solubility.     

Enhancement of solubility and therapeutic potential of poorly soluble lovastatin by SMEDDS formulation adsorbed on directly compressed spray dried magnesium aluminometasilicate liquid loadable tablets: A study in diet induced hyperlipidemic rabbits

The aim of present study was to formulate and evaluate a self-microemulsifying drug delivery systems (SMEDDS) containing lovastatin and to further explore the ability of porous Neusilin^® US2 tablet as a solid carrier for SMEDDS. SMEDDS formulations of varying proportions of peceol, cremophor RH 40 and transcutol-P were selected and subjected to in-vitro evaluation, including dispersibility studies, droplet size, zeta potential measurement and release studies. The results indicated that the drug release profile of lovastatin from SMEDDS formulations was statistically significantly higher (p-value < 0.05) than the plain lovastatin powder. Thermodynamic stability studies also confirmed the stability of the prepared SMEDDS formulations. The optimized formulation, which consists of 12% of peceol, 44% of cremophor RH 40, and 44% of transcutol-P was loaded into directly compressed liquid loadable tablet of Neusilin^® US2 by simple adsorption method. In order to determine the ability of Neusilin^® US2 as a suitable carrier pharmacodynamics study were also carried out in healthy diet induced hyperlipidemic rabbits. Animals were administered with both liquid SMEDDS and solid SMEDDS as well. From the results obtained, Neusilin^® was found to be a suitable carrier for SMEDDS and was equally effective in reducing the elevated lipid profile. In conclusion, liquid loadable tablet (LLT) is predicted to be a promising technique to deliver a liquid formulation in solid state.     

A Self-Microemulsifying Drug Delivery System to Overcome Intestinal Resveratrol Toxicity and Presystemic Metabolism

A mixed lipid-mixed surfactant self-microemulsifying drug delivery system (SMEDDS) was developed to exploit the health benefits of resveratrol, a Biopharmaceutical Classification System Class 2 natural polyphenol, subject to extensive intestinal presystemic metabolism. SMEDDS with a mixed lipid phase (castor oil/Capmul MCM 1:1) and a mixed surfactant phase (Kolliphor EL/Kolliphor RH 40 1:1) was developed and evaluated for its self-emulsifying properties and in vitro dispersion. The impact of SMEDDS on the permeability properties of resveratrol and its metabolite fluxes through the rat intestine and Caco-2 cells was monitored. The inhibitory effect of selected SMEDDS components on the efflux transporters multidrug resistance-associated protein and P-gp as well as cytotoxicity was assessed on Caco-2 cells. The formulation allowed for high resveratrol loading (122.5 mg/g SMEDDS), excellent self-emulsifying properties, and very rapid release. When formulated in SMEDDS, resveratrol metabolite efflux significantly declined. The formulation (SMEDDS without incorporated resveratrol) and its individual components did not compromise in vitro cell vitality and integrity. Mixed lipid-mixed surfactant SMEDDS is a prospective formulation to improve resveratrol biopharmaceutical, pharmacokinetic, and toxicological properties, leading the way to resveratrol use not only as a supplement but also as a pharmacological drug. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:3491–3500, 2014     

Enhanced intestinal lymphatic absorption of saquinavir through supersaturated self-microemulsifying drug delivery systems

The therapeutic potential of saquinavir, a specific inhibitor of human immunodeficiency virus (HIV)-1 and HIV-2 protease enzymes, has been largely limited because of a low solubility and consequnt low bioavailability. Thus, we aimed to design a supersaturated self-microemulsifying drug delivery system (S-SMEDDS) that can maintain a high concentration of saquinavir in gastro-intestinal fluid thorugh inhibiting the drug precipitation to enhance the lymphatic transport of saquinavir and to increase the bioavailability of saquinavir considerably. Solubilizing capacity of different oils, surfactants, and cosurfactants for saquinavir was evaluated to select optimal ingredients for preparation of SMEDDS. Through the construction of pseudo-ternary phase diagram, SMEDDS formulations were established. A polymer as a precipitation inhibitor was selected based on its viscosity and drug precipitation inhibiting capacity. The S-SMEDDS and SMEDDS designed were administered at an equal dose to rats. At predetermined time points, levels of saquinavir in lymph collected from the rats were assessed. SMEDDS prepared presented a proper self-microemulsification efficiency and dispersion stability. The S-SMEDDS fabricated using the SMEDDS and hydroxypropyl methyl cellulose 2910 as a precipitation inhibitor exhibited a signficantly enhanced solubilizing capacity for saquinavir. The drug concentration in a simulated intestinal fluid evaluated with the S-SMEDDS was also maintained at higher levels for prolonged time than that examined with the SMEDDS. The S-SMEDDS showed a considerably enhanced lymphatic absoprtion of saquinavir in rats compared to the SMEDDS. Therefore, the S-SMEDDS would be usefully exploited to enhance the lymphatic absorption of hydrophobic drugs that need to be targeted to the lymphatic system.     

Enhancing both oral bioavailability and brain penetration of puerarin using borneol in combination with preparation technologies

Now there are few good oral preparations of puerarin used in cerebrovascular diseases because of its poor oral absorption caused by the low water solubility and the poor penetration into brain. In this study, three oral formulations of puerarin, nanocrystals suspension (NCS), inclusion compounds solution (ICS) and self-microemulsifying drug delivery system (SMEDDS) were prepared with borneol as an oral brain-targeting enhancer. A rat syngeneic in vitro model of the brain–blood barrier (BBB) was established to investigate effects of borneol on the permeability of puerarin across the BBB. The pharmacokinetics of puerarin in mice after oral administration was investigated by a high performance liquid chromatography-mass spectrometry/mass spectrometry (HPLC-MS/MS) method. The in vitro BBB model study showed the permeability of puerarin was increased significantly (p?p?plasma) and in brain (AUC_brain) for SMEDDS were significantly higher than those for NCS (p?p?相似文献   

Biowaiver extension potential and IVIVC for BCS Class II drugs by formulation design: Case study for cyclosporine self-microemulsifying formulation

The objective of this work was to suggest the biowaiver potential of biopharmaceutical classification system (BCS) Class II drugs in self-microemulsifying drug delivery systems (SMEDDS) which are known to increase the solubility, dissolution and oral absorption of water-insoluble drugs. Cyclosporine was selected as a representative BCS Class II drug. New generic candidate of cyclosporine SMEDDS (test) was applied for the study with brand SMEDDS (reference I) and cyclosporine self-emulsifying drug delivery systems (SEDDS, reference II). Solubility and dissolution of cyclosporine from SMEDDS were critically enhanced, which were the similar behaviors with BCS class I drug. The test showed the identical dissolution rate and the equivalent bioavailability (0.34, 0.42 and 0.68 of p values for AUC_0→24h, C_max and T_max, respectively) with the reference I. Based on the results, level A in vitro-in vivo correlation (IVIVC) was established from these two SMEDDS formulations. This study serves as a good example for speculating the biowaiver extension potential of BCS Class II drugs specifically in solubilizing formulation such as SMEDDS.     

西罗莫司自乳化给药系统及其固体化研究

目的 筛选西罗莫司自微乳给药系统处方,并制备微丸。方法 通过溶解度试验确定助乳化剂、油相和乳化剂的选择范围;采用三元相图法、星点设计和效应面法对该体系优化制备工艺及处方。采用挤出-滚圆法制备不同处方的西罗莫司自微乳化微丸。结果 西罗莫司自微乳微丸的最终处方为:西罗莫司0.4%、油酸聚乙二醇甘油酯9.3%、聚氧乙烯-35-蓖麻油15.9%、二乙二醇单乙基醚8.0%、微晶纤维素49.8%、乳糖13.3%、羧甲基淀粉钠3.3%。溶出度试验显示,西罗莫司固体自微乳微丸在水中的溶出度远大于市售西罗莫司片,在0.4%SDS溶液中,两制剂的溶出度相当。结论 自微乳化给药系统可用于提高西罗莫司的体外溶出度。     

Development and evaluation of self-microemulsifying liquid and pellet formulations of curcumin,and absorption studies in rats

This study describes the development and characterization of self-microemulsifying drug delivery systems (SMEDDS) in liquid and pellet forms that result in improved solubility, dissolution, and in vivo oral absorption of the poorly water-soluble compound curcumin. Solubility of curcumin was determined in various vehicles, including oils, surfactants and co-surfactants. Pseudo-ternary phase diagrams were constructed to identify the most efficient self-emulsification region. The optimized SMEDDS used for curcumin formulations in liquid and pellet forms contained 70% mixtures of two surfactants: Cremophor EL and Labrasol (1:1), and 30% mixtures of oil: Labrafac PG and Capryol 90 (1:1). The curcumin-SMEDDS in liquid and pellet formulations rapidly formed fine oil-in-water microemulsions, with particle size ranges of 25.8–28.8 nm and 29.6–32.8 nm, respectively. The in vitro rate and extent of release of curcumin from liquid SMEDDS and SMEDDS pellets was about 16-fold higher than that of unformulated curcumin. Plasma concentration–time profiles from pharmacokinetic studies in rats dosed with liquid and pelleted SMEDDS showed 14- and 10-fold increased absorption of curcumin, respectively, compared to the aqueous suspensions of curcumin. Curcumin-SMEDDS liquid and curcumin-SMEDDS pellets were found to be stable up to 6 months under intermediate and accelerated conditions. These studies demonstrate that the new self-microemulsifying systems in liquid and pellet forms are promising strategies for the formulation of poorly soluble lipophilic compounds with low oral bioavailability.     

Development and evaluation of self-microemulsifying liquid and granule formulations of Brucea javanica oil

The aim of this study was to develop and characterize a self-microemulsifying drug delivery system (SMEDDS) of Brucea javanica oil (BJO) and transform the liquid formulation into solid granules. Solubility studies of BJO and pseudo-ternary phase diagrams were used to identify the most efficient self-emulsification region. A methyl thiazolyl tetrazolium (MTT) assay was performed to identify cell apoptosis. Antitumor activity studies were also employed to evaluate the BJO SMEDDS. The optimized BJO SMEDDS in liquid and granule formulations rapidly formed fine oil-in-water microemulsions with particle sizes <50 nm. Additionally, the MTT assay demonstrated that BJO SMEDDS had a significant effect on cancer cells, and antitumor activity studies showed remarkable inhibition of S180 tumors. The BJO SMEDDS, optimized to have good characteristics, was successfully transformed into solid granules by adsorbing onto crospovidone. The studies of the release of the BJO SMEDDS of liquid and granules in vitro suggested that the release of BJO was enhanced by the SMEDDS. These studies revealed that the new self-microemulsifying systems of liquid and granule forms might be promising strategies for the oral delivery of the poorly water-soluble drug BJO.     

Co-delivery of honokiol,a constituent of Magnolia species,in a self-microemulsifying drug delivery system for improved oral transport of lipophilic sirolimus

Sirolimus is recognized as a P-glycoprotein (P-gp) substrate with poor water-solubility. To improve its solubility and bioabsorption, self-microemulsifying drug delivery systems (SMEDDS) containing a novel P-gp inhibitor, honokiol, were prepared. The aim of this work was to evaluate the enhanced transport of sirolimus SMEDDS as well as the roles of honokiol. In situ single-pass intestinal perfusion and in vitro human colon adenocarcinoma (Caco-2) cell models were applied to study the effects of honokiol within SMEDDS on the transport of sirolimus. The results indicated that a combination of honokiol with sirolimus in SMEDDS did not significantly alter the particle size, polydispersity index and release of drugs. In addition, the absorption rate constant (K_a) as well as the effective permeability coefficients (P_eff) of sirolimus in situ intestinal absorption, and the apparent permeability coefficients (P_app) of sirolimus in caco-2 cells were significantly enhanced by cremophor EL-based SMEDDS with honokiol as compared with those of SMEDDS without honokiol. Rhodamine123 uptake rate in caco-2 cells and in vitro cytotoxicity of sirolimus were enhanced by honokiol in SMEDDS indicating a substantial P-gp inhibition of honokiol. In conclusion, coadministration of honokiol with poor soluble P-gp substrate in SMEDDS, could serve as a favorable approach for oral delivery.     

Inclusion of Digestible Surfactants in Solid SMEDDS Formulation Removes Lag Time and Influences the Formation of Structured Particles During Digestion

Solid self-microemulsifying drug delivery systems (SMEDDS) have received considerable attention in recent times attempting to overcome the drawbacks of liquid SMEDDS. Earlier literature reports on solid SMEDDS have focussed on formulation development; however, the digestibility and propensity for self-assembly of the digested components with endogenous bile salts and phospholipids are unknown. Therefore, as a starting point, previously reported solid SMEDDS containing Gelucire® 44/14 (GEL) and the non-digestible surfactants, Vitamin E TPGS (TPGS) and Lutrol® F 127 (F 127), were prepared, and their dispersion and digestion behaviours were studied using an in vitro lipolysis model, coupled with small-angle X-ray scattering (SAXS) to determine the formed colloidal structures during digestion in real time. GEL alone was digested (89%) and formed a lamellar phase (Lα). When surfactants were added at a 40:60%?w/w lipid to surfactants ratio, digestion was inhibited with a significant lag time being evident. However, increasing the fraction of GEL to 50%?w/w enabled digestion with reduced lag time. The substitution of the non-digestible surfactants with digestible surfactants, sucrose esters S-1670 (S-1670) and Span® 60 (S-60), eliminated the digestion lag time, and the formation of colloidal structures was more similar to that of GEL alone.     

微粉硅胶对固体自微乳化给药系统小肠吸收的影响

固体载体对固体自微乳化给药系统(solid self-microemulsifying drug delivery systems,S-SMEDDS)的体内外性质有重要影响。本文探讨微粉硅胶对S-SMEDDS药物吸收的影响,为选择适宜固体载体提供依据。通过研究微粉硅胶对小肠脂解和S-SMEDDS体外释放的影响,并采用新型体外脂解-吸收模型研究微粉硅胶对S-SMEDDS离体小肠吸收的影响。结果发现微粉硅胶既能提高脂解速率,增加脂解后水性分散相中药物分配,促进药物吸收;又会延缓S-SMEDDS体外释药,影响药物的吸收速度;最终导致对S-SMEDDS的离体小肠吸收没有显著性影响。而且微粉硅胶对脂解和释药的影响都与其用量有关,这提示微粉硅胶适合作为S-SMEDDS的固体载体,其用量需要进一步筛选优化。     

Preparation and evaluation of self-microemulsifying drug delivery system of oridonin

The objective of this study was to develop self-microemulsifying drug delivery system (SMEDDS) to enhance the oral bioavailability of the poorly water-soluble drug, oridonin. The influence of the oil, surfactant and co-surfactant types on the drug solubility and their ratios on forming efficient and stable SMEDDS were investigated in detail. The SMEDDS were characterized by morphological observation, droplet size and zeta-potential determination, cloud point measurement and in vitro release study. The optimum formulation consisted of 30% mixture of Maisine 35-1 and Labrafac CC (1:1), 46.7% Cremopher EL, and 23.3% Transcutol P. Invitro release test showed a complete release of oridonin from SMEDDS in an approximately 12h. The absorption of oridonin from SMEDDS showed a 2.2-fold increase in relative bioavailability compared with that of the suspension. Our studies demonstrated the promising use of SMEDDS for the delivery of oridonin by the oral route.     

Formulation design of self-microemulsifying drug delivery systems for improved oral bioavailability of celecoxib

Celecoxib is a hydrophobic and highly permeable drug belonging to class II of biopharmaceutics classification system. Low aqueous solubility of celecoxib leads to high variability in absorption after oral administration. Cohesiveness, low bulk density and compressibility, and poor flow properties of celecoxib impart complications in it's processing into solid dosage forms. To improve the solubility and bioavailability and to get faster onset of action of celecoxib, the self-microemulsifying drug delivery system (SMEDDS) was developed. Composition of SMEDDS was optimized using simplex lattice mixture design. Dissolution efficiency, t(85%), absorbance of diluted SMEDDS formulation and solubility of celecoxib in diluted formulation were chosen as response variables. The SMEDDS formulation optimized via mixture design consisted of 49.5% PEG-8 caprylic/capric glycerides, 40.5% mixture of Tween20 and Propylene glycol monocaprylic ester (3:1) and 10% celecoxib, which showed significantly higher rate and extent of absorption than conventional capsule. The relative bioavailability of the SMEDDS formulation to the conventional capsule was 132%. The present study demonstrated the suitability of mixture design to optimize the compositions for SMEDDS. The developed SMEDDS formulations have the potential to minimize the variability in absorption and to provide rapid onset of action of celecoxib.     

Development of polymeric nanoparticles with highly entrapped herbal hydrophilic drug using nanoprecipitation technique: an approach of quality by design

Abstract

The intention of this study is to achieve higher entrapment efficiency (EE) of berberine chloride (selected hydrophilic drug) using nanoprecipitation technique. The solubility of drug was studied in various pH buffers (1.2–7.2) for selection of aqueous phase and stabilizer. Quality by design (QbD)-based 3² factorial design were employed for optimization of formulation variables; drug to polymer ratio (X₁) and surfactant concentration (X₂) on entrapment efficiency (EE), particle size (PS) and polydispersity index (PDI) of the nanoparticles. The nanoparticles were subjected to solid state analysis, in vitro drug release and stability study. The aqueous phase and stabilizer selected for the formulations were pH 4.5 phthalate buffer and surfactant F-68, respectively. The formulation (F-6) containing drug to polymer ratio (1:3) and stabilizer (F-68) concentration of 50?mM exhibited best EE (82.12%), PS (196.71?nm), PDI (0.153). The various solid state characterizations assured that entrapped drug is amorphous and nanoparticles are fairly spherical in shape. In vitro drug release of the F-6 exhibited sustained release with non-Fickian diffusion and stable at storage condition. This work illustrates that the proper selection of aqueous phase and optimization of formulation variables could be helpful in improving the EE of hydrophilic drugs by nanoprecipitation technique.     

Development of novel flurbiprofen-loaded solid self-microemulsifying drug delivery system using gelatin as solid carrier

To develop a novel flurbiprofen-loaded solid self-microemulsifying drug delivery system (solid SMEDDS) with improved oral bioavailability using gelatin as a solid carrier, the solid SMEDDS formulation was prepared by spray-drying the solutions containing liquid SMEDDS and gelatin. The liquid SMEDDS, composed of Labrafil M 1944 CS/Labrasol/Transcutol HP (12.5/80/7.5%) with 2% w/v flurbiprofen, gave a z-average diameter of about 100?nm. The flurbiprofen-loaded solid SMEDDS formulation gave a larger emulsion droplet size compared to liquid SMEDDS. Unlike conventional solid SMEDDS, it produced a kind of microcapsule in which liquid SMEDDS was not absorbed onto the surfaces of carrier but formed together with carrier in it. However, the drug was in an amorphous state in it like conventional solid SMEDDS. It greatly improved the oral bioavailability of flurbiprofen in rats. Thus, gelatin could be used as a carrier in the development of solid SMEDDS with improved oral bioavailability of poorly water-soluble drug.     

星点设计-效应面法优化依托泊苷自微乳化释药系统

目的 研制稳定的依托泊苷自微乳制剂并评价其质量.方法 通过溶解度试验、处方配比、三元相图的绘制及星点设计-效应面法的优化,以粒径、溶解度和zeta电位为指标,筛选各组分的最佳组合和处方配比,并对依托泊苷自微乳的理化性质和体外溶出进行测定.结果 依托泊苷自微乳最佳处方为:依托泊苷(2.0％)、Capryol 90(15.1％)、Cremophor RH40(30.4％)、Transcutol HP(52.5％),平均粒径为18.31 nm,自乳化时间＜1min,乳化后载药量＞ 25 mg· mL-1.结论 制备的依托泊苷自微乳稳定性好,载药量高.