首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
OBJECTIVE: To evaluate the physical compatibility and chemical stability of linezolid (Zyvox-Pharmacia) 200 mg/100 mL admixed with cefazolin sodium 1 gram, ceftazidime 2 grams, and ceftriaxone sodium 1 gram for 7 days at 4 degrees C and 23 degrees C. DESIGN: Controlled experimental trial. SETTING: Laboratory. INTERVENTIONS: The test samples were prepared by adding the required amount of the cephalosporin antibiotic to bags of linezolid injection 200 mg/100 mL. MAIN OUTCOME MEASURES: Physical stability and chemical stability based on drug concentrations initially and after 1, 3, 5, and 7 days of storage at 4 degrees C and 23 degrees C protected from light. RESULTS: All of the linezolid admixtures with cephalosporins were clear when viewed in normal fluorescent room light and with a Tyndall beam. Measured turbidity and particulate content were low and exhibited little change. The cefazolin sodium-containing samples were colorless throughout the study. The admixtures with ceftazidime and ceftriaxone sodium had a slight yellow tinge initially, and the room temperature samples became a frank yellow color after 5 days. The refrigerated samples did not change color. High-performance liquid chromatography analysis found little or no loss of linezolid in any sample stored at either temperature throughout the study. Cefazolin sodium and ceftazidime in the linezolid admixtures at 4 degrees C remained stable for 7 days, but at 23 degrees C cefazolin sodium was stable for 3 days and ceftazidime for only 24 hours before cephalosporin decomposition exceeded 10%. Ceftriaxone sodium was less stable in the admixtures; 10% loss occurred in 3 days at 4 degrees C and more than 20% loss occurred in 24 hours at 23 degrees C. CONCLUSION: Admixtures of linezolid 200 mg/100 mL with cefazolin sodium 1 gram and ceftazidime 2 grams were physically compatible and chemically stable for at least 7 days stored at 4 degrees C protected from light and for 3 days and 1 day, respectively, at 23 degrees C protected from light. Admixtures of linezolid with ceftriaxone sodium 1 gram exhibited a rapid rate of cephalosporin loss at 23 degrees C, which precludes admixture of the two drugs.  相似文献   

2.
OBJECTIVE: To evaluate the physical and chemical stabilities of methylprednisolone sodium succinate solutions packaged in sterile AutoDose Infusion System bags. SETTING: Laboratory. INTERVENTIONS: The test samples were prepared by reconstituting the methylprednisolone sodium succinate, adding the required amount of drug to the AutoDose Infusion System bags, and diluting to the target concentrations of 100 mg/100 mL and 1 gram/100 mL with 0.9% Sodium Chloride Injection. MAIN OUTCOME MEASURES: Physical stability and chemical stability based on drug concentrations initially and at appropriate intervals over periods up to 3 days at 23 degrees C and 30 days at 4 degrees C. RESULTS: The admixtures initially were clear when viewed in normal fluorescent room light and with a Tyndall beam. Measured turbidity and particulate content were low initially and exhibited little change. All samples were essentially colorless throughout the study. High-performance liquid chromatography analysis revealed some decomposition in the samples. Methylprednisolone sodium succinate exhibited about 8% loss after 2 days and about 13% loss after 3 days at 23 degrees C. In the samples stored at 4 degrees C, methylprednisolone sodium succinate exhibited acceptable stability through 21 days of storage, but losses exceeded 10% after 30 days. CONCLUSION: Methylprednisolone sodium succinate exhibited physical and chemical stabilities consistent with those found in previous studies. The AutoDose Infusion System bags did not adversely affect the physical or chemical stability of this drug.  相似文献   

3.
The stability of cefazolin sodium reconstituted in four artificial tear solutions, two acetate buffer solutions, phosphate buffer solution, and 0.9% sodium chloride injection was studied. Cefazolin was reconstituted in Tearisol, Isopto Tears, Liquifilm Forte, and Liquifilm Tears; acetate buffer solution at pH 4.5 and pH 5.7; phosphate buffer solution at pH 7.5; and 0.9% sodium chloride injection. The solutions were stored at 4 degrees C, 25 degrees C, and 35 degrees C for seven days. All of the solutions were inspected for particulates, turbidity, color, and odor. Five assay determinations on each of three samples of each formulation were performed using a stability-indicating high-performance liquid chromatographic assay. Cefazolin stability was influenced primarily by pH and storage temperature. Reconstitution of cefazolin sodium in the alkaline tear solutions Isopto Tears and Tearisol and in phosphate buffer solution resulted in particulate and color formation at 25 degrees C and 35 degrees C. Turbidity was noted after cefazolin sodium was reconstituted in Isopto Tears. No color or precipitate formation was evident after seven days at 25 degrees C and 35 degrees C in the formulations of acidic pH containing Liquifilm Tears, Liquifilm Forte, 0.9% sodium chloride injection or acetate buffer solution as the vehicles. The extent of degradation of cefazolin was substantially higher in the formulations of alkaline pH than in those of acidic pH at 35 degrees C and 25 degrees C. All of the formulations retained more than 90% of their initial concentration when stored at 4 degrees C. Cefazolin sodium, when reconstituted in artificial tear solutions with an acidic pH, is stable for up to three days at room temperature.  相似文献   

4.
OBJECTIVE: To evaluate the physical compatibility and chemical stability of linezolid (Zyvox-Pharmacia) 200 mg/100 mL admixed with aztreonam (Azactam-Squibb) 2 grams and separately with piperacillin sodium (Pipracil-Lederle) 3 grams over 7 days at 4 degrees C and 23 degrees C. DESIGN: Controlled experimental trial. SETTING: Laboratory. INTERVENTIONS: Test samples were prepared by adding the required amount of aztreonam or piperacillin sodium to separate bags of linezolid injection 200 mg/100 mL. MAIN OUTCOME MEASURES: Physical compatibility and chemical stability based on drug concentrations initially and after 1, 3, 5, and 7 days of storage at 4 degrees C and 23 degrees C. RESULTS: All of the linezolid admixtures with aztreonam and with piperacillin sodium were clear when viewed in normal fluorescent room light and with a Tyndall beam. Measured turbidity and particulate content were low and exhibited little change throughout the study at both storage temperatures. High-performance liquid chromatography analysis found little or no loss of linezolid in any sample stored at either temperature throughout the study. Aztreonam in the linezolid admixtures was stable for 7 days, exhibiting less than 5% loss at 4 degrees C and 9% loss at 23 degrees C. Piperacillin sodium in the linezolid admixtures was stable for 7 days at 4 degrees C, exhibiting no loss, but was stable for only 3 days at 23 degrees C with losses of about 5%. Losses had increased to 9% to 12% after 5 days of storage at room temperature. CONCLUSION: Admixtures of linezolid 200 mg/100 mL with aztreonam 2 grams or piperacillin sodium 3 grams were physically compatible and chemically stable for at least 7 days stored at 4 degrees C and for 7 days or 3 days, respectively, at 23 degrees C.  相似文献   

5.
Stability of ceftazidime and amino acids in parenteral nutrient solutions   总被引:1,自引:0,他引:1  
The stability of ceftazidime was studied under conditions simulating administration via a Y-injection site into a primary infusion of parenteral nutrient (PN) solution; the stabilities of ceftazidime and amino acids when the drug was added directly to PN solutions were also studied. Three PN solutions containing 25% dextrose were used; the amino acid contents were 0, 2.5%, and 5%. Ceftazidime with sodium carbonate was used to prepare stock solutions of ceftazidime 40 mg/mL in both 0.9% sodium chloride injection and 5% dextrose injection; to simulate Y-site injection, samples were added to the three PN solutions to achieve ceftazidime concentrations of 10 and 20 mg/mL, or 1:1 and 1:3 ratios of drug solution to PN solution. Samples of these admixtures were assayed by high-performance liquid chromatography (HPLC) initially and after room-temperature (22 degrees C) storage for one and two hours. Additional solutions were prepared by adding sterile water for injection to ceftazidime with sodium carbonate; drug solutions were added to each PN solution in polyvinyl chloride bags to achieve ceftazidime concentrations of 1 and 6 mg/mL. The samples were assayed by HPLC for ceftazidime concentration after storage at 22 degrees C for 3, 6, 12, 24, and 36 hours and at 4 degrees C for 1, 3, 7, and 14 days. Amino acid stability was analyzed in admixtures containing 5% amino acids and ceftazidime 6 mg/mL after 24 and 48 hours at 22 degrees C and after 7 and 10 days at 4 degrees C.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

6.
The stability of cefazolin sodium, cefoxitin sodium, ceftazidime, and penicillin G sodium in prefilled drug reservoirs that were stored at -20 degrees C for 30 days, thawed at 5 degrees C for four days, and pumped at 37 degrees C for one day was studied. Each antimicrobial agent was diluted with sterile water for injection to a concentration representative of the most common dosage when administered via a portable infusion pump. Ten milliliters of each drug solution was placed in individual glass vials to serve as controls, and volumes appropriate to deliver the designated dosages were loaded into the drug reservoirs. Triplicate reservoirs were prepared for each drug. One-milliliter samples from all containers were taken on days 0, 30, 31, 32, 33, 34, 34.5, and 35. All solutions were observed for color change and precipitation. Drug concentrations were determined using high-performance liquid chromatography. Leaching of the plasticizer diethylhexyl phthalate (DEHP) was analyzed by packed-column gas chromatography on days 0 and 35. No color change or precipitation was observed. No DEHP concentrations above 1 ppm were detected. More than 90% of the initial concentrations of each drug remained, except penicillin G sodium, which had a mean concentration of 83.9 +/- 0.5% at the end of the study. Cefazolin sodium, cefoxitin sodium, and ceftazidime in admixtures with sterile water for injection are stable under the conditions of this study. Penicillin G sodium should not be administered for more than 12 hours after such a cycle of freezing and thawing.  相似文献   

7.
Parenteral aseptic preparations of piperacillin/tazobactam are used frequently in hospitals, but there is limited published information on their stability in polyvinyl chloride (PVC) and polyolefine laminate (non-PVC). The purpose of this study was to evaluate the stability in these containers and to determine the optimum validated shelf life so that the formulations may be prepared in bulk in appropriately licensed facilities. In the first study, the stability of piperacillin/tazobactam 45 mg/ml was determined in polyvinyl chloride and polyolefine laminate bags in 0.9% (w/v) sodium chloride at 7 degrees C, 25 degrees C/60% relative humidity (RH) and room temperature in the light (RTL) with storage up to 41 days for PVC bags and 98 days for non-PVC bags. In the second study, the stability of piperacillin/tazobactam 45 mg/ml was determined in non-PVC bags in a buffered sodium chloride formulation at 7 degrees C, 25 degrees C/60% RH and RTL with storage up to 201 days. Samples from each admixture were analysed for piperacillin concentration, tazobactam concentration and appearance of decomposition products by stability indicating high-performance liquid chromatography (HPLC). The pH and appearance of solution and container were also monitored. Shelf lives were calculated using the maximum rate method. Tazocin was found to be stable in 0.9% (w/v) sodium chloride in PVC bags for up to 5 days at 7 degrees C and 4 days at both 25 degrees C and RTL. In non-PVC bags, it was stable for 17, 4 and 3 days, respectively. It was stable in the buffered sodium chloride formulation in non-PVC bags for up to 58 days at 7 degrees C, 10 days at 25 degrees C and 7 days at RTL.  相似文献   

8.
OBJECTIVE: To evaluate the physical and chemical stability of etoposide phosphate solutions over 7 days at 32 degrees C and 31 days at 4 degrees C and 23 degrees C: (1) at etoposide concentrations of 0.1 and 10 mg/mL as phosphate in 0.9% sodium chloride injection and 5% dextrose injection and (2) at etoposide concentrations of 10 and 20 mg/mL as phosphate in bacteriostatic water for injection packaged in plastic syringes. DESIGN: Test samples of etoposide phosphate were prepared in polyvinyl chloride (PVC) bags of the two infusion solutions at etoposide concentrations of 0.1 and 10 mg/mL as phosphate. Additional test samples were prepared in bacteriostatic water for injection containing benzyl alcohol 0.9% at etoposide concentrations of 10 and 20 mg/mL as phosphate and were packaged in 5 mL plastic syringes. Evaluations for physical and chemical stability were performed initially; after 1 and 7 days of storage at 32 degrees C; and after 1, 7, 14, and 31 days of storage at 4 degrees C and 23 degrees C. Physical stability was assessed using visual observation in normal light and using a high-intensity monodirectional light beam. Turbidity and particle content were measured electronically. Chemical stability of the drug was evaluated by using a stability-indicating high-performance liquid chromatographic (HPLC) analytic technique. RESULTS: All samples were physically stable throughout the study. Little or no change in particulate burden and haze level were found. In the intravenous infusion solutions, little or no loss of etoposide phosphate occurred in any of the samples throughout the study period. The 10 and 20 mg/mL samples in bacteriostatic water for injection repackaged in syringes were also stable throughout the study, exhibiting a maximum of 6% or 7% loss after 31 days of storage at 23 degrees C and less than 4% in 31 days at 4 degrees C. CONCLUSION: Etoposide phosphate prepared as intravenous admixtures of etoposide 0.1 and 10 mg/mL as phosphate in 5% dextrose injection and 0.9% sodium chloride injection in PVC bags and as etoposide 10 and 20 mg/mL as phosphate in bacteriostatic water for injection packaged in plastic syringes is physically and chemically stable for at least 7 days at 32 degrees C and 31 days at 4 degrees C and 23 degrees C. This new water-soluble phosphate-ester of etoposide formulation solves the precipitation problems associated with the old organic solvent and surfactant-based formulation.  相似文献   

9.
目的研究头孢呋辛钠、头孢曲松钠、头孢他啶三种头孢类药物的输液在5%葡萄糖注射液和0.9%氯化钠注射液中稳定性影响因素。方法在不同光照、不同温度以及不同时间条件下测定三种头孢类药物输液中药物的含量、pH值及不溶性微粒等。结果在不同光照和温度条件下,三种药物与两种输液配伍后3个小时以内含量基本稳定,头孢呋辛钠和头孢曲松钠在输液中的有关物质随着放置时间延长明显增加,头孢他啶相对不明显。结论三种头孢类药物与5%葡萄糖注射液和0.9%氯化钠注射液配伍在3个小时以内可以任意选择静脉滴注时间,但最好即配即用,其中头孢呋辛钠和头孢曲松钠最好避光滴注。在配药过程中,了解药物在输液中的稳定性影响因素有利于提高药物的临床疗效,促进合理用药。  相似文献   

10.
The stability of ranitidine in concentrations of 0.5, 1.0, and 2.0 mg/mL in admixtures with commonly used i.v. fluids was studied. The admixture vehicles were 0.9% sodium chloride, 5% dextrose, 10% dextrose, 5% dextrose and 0.45% sodium chloride, and 5% dextrose with lactated Ringer's (DLR) injections in polyvinyl chloride bags. Three bags were prepared for each test solution and stored under each of the following conditions: seven days at room temperature (23 +/- 1 degrees C) in normal laboratory lighting, 30 days at 4 degrees C, and 60 days at -20 degrees C followed by either seven days at room temperature (in light) or 14 days at 4 degrees C. Ranitidine content was determined by high-performance liquid chromatography at several intervals. Color, clarity, and pH were also examined. Ranitidine concentrations remained greater than or equal to 90% of initial concentrations under all storage conditions except in the frozen DLR admixtures. Drug loss in the DLR admixtures was greatest at the lower ranitidine concentrations. The only visual changes were yellow color in the thawed DLR admixtures and those containing ranitidine 2.0 mg/mL in 5% dextrose and 0.45% sodium chloride. Slight increases in the pH of some admixtures were noted. Ranitidine is stable for seven days at room temperature and 30 days at 4 degrees C at all concentrations and in all vehicles studied. At the studied concentrations, the drug is stable in admixtures frozen for 60 days and stored for seven days at room temperature or 14 days refrigerated, except in DLR admixtures; these admixtures should not be stored frozen.  相似文献   

11.

Background:

Cefazolin is a semisynthetic penicillin derivative with a narrow spectrum of activity covering some gram-positive organisms and a few gram-negative aerobic bacteria.

Objective:

To determine the physical and chemical stability of cefazolin sodium reconstituted with sterile water for injection and stored in polypropylene syringes or diluted with either 5% dextrose in water (D5W) or 0.9% sodium chloride (normal saline [NS]) and stored in polyvinylchloride (PVC) minibags.

Methods:

Reconstituted solutions of cefazolin (100 or 200 mg/mL) were packaged in polypropylene syringes. More dilute solutions (20 or 40 mg/mL) were prepared in D5W or NS and packaged in PVC minibags. For each concentration–diluent–container combination, 3 containers were designated for each day of analysis (days 7, 14, 21, and 30). Containers were stored under refrigeration (5°C) with protection from light until the designated day of analysis, at which time one 5-mL sample was collected from each the designated container. The designated containers were then stored at room temperature (21°C to 25°C) with exposure to light for an additional 72 h, and additional samples were drawn. The samples were assayed using a validated, stability-indicating high-performance liquid chromatography method. The colour and clarity of the solutions, as well as their pH, were also monitored on each sampling day.

Results:

All samples remained clear for the duration of the study; they had a slight yellow colour that darkened over time, and there was an increase in pH. Solutions diluted with sterile water for injection and stored in polypropylene syringes retained at least 94.5% of the initial concentration after 30 days of refrigerated storage and at least 92.1% after an additional 72 h at room temperature with exposure to light. Samples diluted in D5W or NS and stored in PVC minibags retained at least 95.8% of the initial concentration after 30 days of refrigerated storage and at least 91.8% after an additional 72 h at room temperature with exposure to light.

Conclusions:

Cefazolin at various concentrations stored in polypropylene syringes or PVC minibags was stable for up to 30 days with storage at 5°C with protection from light, followed by an additional 72 h at 21°C to 25°C with exposure to light.  相似文献   

12.

Background:

The Accufuser silicone-based elastomeric infusion device has recently been approved for the Canadian market.

Objective:

To evaluate the stability of 5 antibiotics (cefazolin, ceftazidime, ceftriaxone, clindamycin, and vancomycin) in either 5% dextrose in water (D5W) or 0.9% sodium chloride in water (NS) after storage in Accufuser disposable silicone balloon infusers.

Methods:

The study drugs were reconstituted, according to the manufacturers’ directions, in polyvinyl chloride minibags with either D5W or NS, at 2 different concentrations. The resulting solutions were transferred to disposable silicone balloon infusers for storage at 4°C or at room temperature (23°C). The concentration of each drug in each solution was determined by validated stability-indicating liquid chromatographic methods after storage for 14 to 31 days.

Results:

Solutions of ceftriaxone in either diluent retained more than 95.2% of the initial concentration for 2 days at room temperature and more than 91.6% of the initial concentration for 14 days at 4°C. Solutions of cefazolin in D5W or NS retained more than 90% of the initial concentration for at least 3 days at room temperature and for at least 26 days at 4°C. Solutions of ceftazidime in D5W or NS retained more than 90% of the initial concentration for only 1 day when stored at room temperature and for at least 4 days at 4°C. Solutions of clindamycin or vancomycin in D5W or NS retained 90% of the initial concentration for at least 7.5 days at room temperature and at least 90% of the initial concentration for at least 27.8 days at 4°C.

Conclusions:

Previously reported expiration dates for solutions stored in elastomeric infusion devices were not based on 95% confidence intervals and were often longer than expiration dates determined from the studies reported here, which are based on 95% confidence intervals. Comparison of the observed concentrations remaining between previously published studies and the studies reported here indicates that the Accufuser elastomeric infusion device did not adversely affect the stability of these drugs.  相似文献   

13.
Parenteral aseptic preparations of hydrocortisone sodium succinate (HSS) are used frequently in hospitals, but little definitive stability information is available. The purpose of this study was to obtain ultimate shelf lives for typical formulations so that they may be prepared in bulk in appropriately licensed facilities. In the first study, the stability of HSS, 1mg/ml, was determined in polyvinyl chloride (PVC) bags and polyolefine (non-PVC) bags, in 0.9% (w/v) sodium chloride at 7 degrees C, 25 degrees C/60% relative humidity (RH) and room temperature in the light (RTL) with storage for up to 135 days. In the second study, the stability of HSS, 50 mg/ml was determined in polypropylene syringes at 5 degrees C and 25 degrees C/60%RH with storage for up to 120 days. Samples from each admixture were analysed by stability indicating high performance liquid chromatography (HPLC) and were monitored for pH, appearance of solution and container, and the rate of appearance of decomposition products. Shelf lives were calculated using the maximum rate method. HSS at a concentration of 1 mg/ml in PVC bags was stable for up to 41 days at 7 degrees C, 8 days at 25 degrees C and 7 days at RTL. It was stable in non-PVC bags for up to 48, 8 and 6 days, respectively. HSS in polypropylene syringes at a strength of 50 mg/ml was stable for up to 81 days at 5 degrees C and 6 days at 25 degrees C.  相似文献   

14.
The stability of aztreonam and cefazolin in intravenous admixtures was studied. Each of the following combinations of drugs was added to both 5% dextrose injection and 0.9% sodium chloride injection in polyvinyl chloride containers: aztreonam 20 mg/mL and cefazolin 20 mg/mL (as the sodium salt); aztreonam 10 mg/mL and cefazolin 5 mg/mL; aztreonam 20 mg/mL and cefazolin 5 mg/mL; and aztreonam 10 mg/mL and cefazolin 20 mg/mL. One of each of these admixtures was stored at 23-25 degrees C for 48 hours and at 4-5 degrees C for seven days. At various storage times the admixtures were inspected for visual changes, and 1-mL samples were tested for pH and assayed using a stability-indicating high-performance liquid chromatographic assay. No visual changes were observed, and changes in pH were negligible. Concentrations of aztreonam and cefazolin under both storage conditions decreased by less than 3%. Intravenous admixtures of aztreonam and cefazolin at the concentrations studied are stable for at least 48 hours at 23-25 degrees C and for seven days at 4-5 degrees C.  相似文献   

15.
Physical and chemical stability of gemcitabine hydrochloride solutions.   总被引:1,自引:0,他引:1  
OBJECTIVE: To evaluate the physical and chemical stability of gemcitabine hydrochloride (Gemzar-Eli Lilly and Company) solutions in a variety of solution concentrations, packaging, and storage conditions. DESIGN: Controlled experimental trial. SETTING: Laboratory. INTERVENTIONS: Test conditions included (1) reconstituted gemcitabine at a concentration of 38 mg/mL as the hydrochloride salt in 0.9% sodium chloride or sterile water for injection in the original 200 mg and 1 gram vials; (2) reconstituted gemcitabine 38 mg/mL as the hydrochloride salt in 0.9% sodium chloride injection packaged in plastic syringes; (3) diluted gemcitabine at concentrations of 0.1 and 10 mg/mL as the hydrochloride salt in polyvinyl chloride (PVC) minibags of 0.9% sodium chloride injection and 5% dextrose injection; and (4) gemcitabine 0.1, 10, and 38 mg/mL as the hydrochloride salt in 5% dextrose in water and 0.9% sodium chloride injection as simulated ambulatory infusions at 32 degrees C. Test samples of gemcitabine hydrochloride were prepared in the concentrations, solutions, and packaging required. MAIN OUTCOME MEASURES: Physical and chemical stability based on drug concentrations initially and after 1, 3, and 7 days of storage at 32 degrees C and after 1, 7, 14, 21, and 35 days of storage at 4 degrees C and 23 degrees C. RESULTS: The reconstituted solutions at a gemcitabine concentration of 38 mg/mL as the hydrochloride salt in the original vials occasionally exhibited large crystal formation when stored at 4 degrees C for 14 days or more. These crystals did not redissolve upon warming to room temperature. All other samples were physically stable throughout the study. Little or no change in particulate burden or the presence of haze were found. Gemcitabine as the hydrochloride salt in the solutions tested was found to be chemically stable at all concentrations and temperatures tested that did not exhibit crystallization. Little or no loss of gemcitabine occurred in any of the samples throughout the entire study period. However, refrigerated vials that developed crystals also exhibited losses of 20% to 35% in gemcitabine content. Exposure to or protection from light did not alter the stability of gemcitabine as the hydrochloride salt in the solutions tested. CONCLUSION: Reconstituted gemcitabine as the hydrochloride salt in the original vials is chemically stable at room temperature for 35 days but may develop crystals when stored at 4 degrees C. The crystals do not redissolve upon warming. Gemcitabine prepared as intravenous admixtures of 0.1 and 10 mg/mL as the hydrochloride salt in 5% dextrose injection and 0.9% sodium chloride injection in PVC bags and as a solution of 38 mg/mL in 0.9% sodium chloride injection packaged in plastic syringes is physically and chemically stable for at least 35 days at 4 degrees C and 23 degrees C. Gemcitabine as the hydrochloride salt is stable for at least 7 days at concentrations of 0.1, 10, and 38 mg/mL in 5% dextrose injection and 0.9% sodium chloride injection stored at 32 degrees C during simulated ambulatory infusion.  相似文献   

16.
The stability of six antibiotics in intravenous fluids in polyvinyl chloride containers after freezing and microwave-thawing is reported. Tobramycin sulfate 160 mg, amikacin sulfate 1 g, ticarcillin disodium 3 g, clindamycin phosphate 300 mg, nafcillin sodium 1 g, and ampicillin sodium was also diluted in plastic bags of 0.9% sodium chloride injection 50 ml. For each antibiotic except ampicillin sodium, three bags were prepared and assayed immediately for antibiotic content. Two of the bags were frozen at -20 degrees C for 30 days and then thawed, one by exposure to room-temperature air and the other by microwave radiation. Each was assayed immediately and after 8 and 24 hours storage at room temperature. The third bag was not frozen, but was stored at room temperature and assayed at 8 and 24 hours. Five bags of ampicillin sodium were prepared-three in 0.9% sodium chloride, which were frozen at -20, -30, and -70 degrees C, and two in 5% dextrose, which were frozen at -30 and -70 degrees C. All ampicillin solutions were stored 30 days, assayed, microwave-thawed, and assayed again. All antibiotics except ampicillin retained 90% or more potency when microwave-thawed after storage at -20 degrees C for 30 days, and after subsequent storage at room temperature for 24 hours. Ampicillin sodium was stable in 0.9% sodium chloride when stored at -30 or -70 degrees C, microwave-thawed, and stored up to eight hours at room temperature. Ampicillin sodium was stable in 5% dextrose when stored at -70 degrees C and microwaved-thawed, but its potency declined to 70.5% after eight hours storage at room temperature.  相似文献   

17.
The stability of ceftazidime solutions (100 and 200 mg/mL) in plastic syringes and glass vials under various storage conditions was examined. Solutions of ceftazidime 100 and 200 mg/mL in sterile water were placed in polypropylene plastic syringes or glass vials and stored (1) at 21-23 degrees C for up to 8 hours, (2) at 4 degrees C for up to 96 hours, (3) at -20 degrees C for 28 days and then 21-23 degrees C for up to 8 hours, (4) at -20 degrees C for 28 days and then 4 degrees C for up to 96 hours, (5) at -20 degrees C for 91 days and then 21-23 degrees C for up to 8 hours, or (6) at-20 degrees C for 91 days and then 4 degrees C for up to 96 hours. Samples were withdrawn from each syringe and vial at designated times and assayed by high-performance liquid chromatography. Solutions were judged to be stable if drug concentrations remained above 90% of the initial values. The number of particles in each container under each storage condition was also evaluated. Ceftazidime was stable under all storage conditions. In all containers, particulate matter was within USP specifications for small-volume injections, with no change in particle count as a result of the freezing and thawing. Ceftazidime in sterile water in either glass vials or plastic syringes is stable for 8 hours at room temperature or 96 hours at 4 degrees C when such storage occurs (1) immediately after constitution, (2) after 28 days of frozen storage, or (3) after 91 days of frozen storage.  相似文献   

18.
The stability of vancomycin hydrochloride mixed with 5% dextrose and 0.9% sodium chloride injections was studied. Vancomycin hydrochloride powder was mixed with each of the two diluents in final concentrations of 5 mg/mL. Duplicate samples of each admixture were divided into four parts and stored at 24 degrees C in glass and in plastic i.v. bags for 17 days and at 5 degrees C and -10 degrees C in glass for 63 days. To additional samples, hydrochloric acid or phosphate buffer was added; these were stored at 24 degrees C for 17 days. At various storage times, clarity and pH of the samples were recorded and vancomycin concentrations were measured in triplicate by high-performance liquid chromatography. Except for the buffered samples, all solutions remained clear and pH was unchanged. Vancomycin concentrations decreased less than 6% during 17 days at room temperature. In the refrigerated and frozen samples, vancomycin concentrations decreased less than 1% throughout the study. Vancomycin hydrochloride is stable in admixtures with 5% dextrose injection and 0.9% sodium chloride injection for 17 days at 24 degrees C and for 63 days at 5 degrees C and -10 degrees C.  相似文献   

19.
The stability of ganciclovir sodium solutions stored in polypropylene syringes and PVC bags was tested in 0.9% sodium chloride at three concentrations 70, 200 and 350 mg/50 ml for polypropylene syringes, and two concentrations (70 and 350 mg/250 ml) for PVC bags and at three temperatures (-20 degrees C, + 4 degrees C, room temperature). The solutions, which had been initially frozen, were thawed by exposure to microwave radiations. The stability of each sample was determined by high-performance liquid chromatography. The results of this study indicate that admixtures of ganciclovir sodium at the concentration rates tested can be frozen for at least one year and are stable for at least 80 days at + 4 degrees C and 7 days at room temperature.  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号