Cementless Metasul metal-on-metal total hip arthroplasties at 13 years

Second-generation metal-on-metal bearings have been used since the late 1980s as alternative bearings to eliminate aseptic loosening due to polyethylene wear. The aim of the present study was to evaluate the long-term results of a series of Metasul (Zimmer GmbH, Winterthur, Switzerland) metal-on-metal total hip arthroplasty (THA). One hundred forty-nine cementless THAs with a 28-mm Metasul articulation were performed in 111 consecutive patients. The results were retrospectively reviewed at 13 years postoperatively. Clinical and radiographic evaluations and implant survivorship were performed. Seven hips (4.7%) were revised. The overall survivorship with revision for any reason as the end point was 0.94. The average Harris hip score was 91.4. Expansive osteolysis was found adjacent to the stem in 4 hips. Metal wear-related aseptic loosening was not the major reason for failure in our Metasul metal-on-metal THAs. Recurrent dislocation was the main reason for revision in our series.     

Midterm results of Metasul metal-on-metal total hip arthroplasty

We assessed 106 total hip arthroplasties performed with a new metal-on-metal hip system; the patients were monitored for at least 5 years. The average Harris Hip Score of the patients was 39.5 points before surgery and 87.8 points at final follow-up evaluation. Radiographically, the acetabular component was stable in 103 hips and possibly unstable in 3 hips. The femoral component was bone ingrown in 97 hips and stable and fibrous in 9. After surgery, 6 hips dislocated. The polyethylene liner dissociated in one patient. No patient exhibited clear signs of loosening, migration, or osteolysis. Distal femoral cortical hypertrophy was seen in 35.8% of the cases. Survival at the mean follow-up point (6.4 years) was 99.1%. There was no significant difference in serum chromium concentration between metal-on-metal bearings and polyethylene-on-metal bearings (control subjects). This study found that metal-on-metal total hip arthroplasty produces excellent midterm results.     

Cementless Metasul metal-on-metal total hip arthroplasty in patients less than fifty years old

BACKGROUND: Durable results of total hip arthroplasty have been difficult to achieve in young patients. We reviewed the intermediate-term clinical and radiographic results in a series of active, higher-demand patients who were less than fifty years old when they underwent cementless total hip arthroplasty with the use of the Metasul metal-on-metal articulation. METHODS: Seventy total hip arthroplasties were performed in sixty-two patients who were younger than fifty years of age (average age, thirty-seven years). Two patients (two hips) had had a resection arthroplasty because of deep infection less than five years postoperatively and were excluded. Sixty patients (sixty-eight hips) were available for complete clinical and radiographic analysis after a mean duration of follow-up of seven years. RESULTS: The mean preoperative Harris hip score of 49 points improved to 95 points at the time of final follow-up; fifty-six patients (93%) had an excellent result. No component was seen to be loose radiographically at the time of final follow-up. Only one focal area of pelvic osteolysis in one patient and two small focal areas of femoral osteolysis in another patient were identified. The hip with focal pelvic osteolysis underwent revision surgery with a liner change and bone-grafting of the osteolytic lesion around a stable component. CONCLUSIONS: At a mean of seven years after arthroplasties with a Metasul metal-on-metal articulation, there was a low rate of osteolysis and aseptic loosening in this group of young patients. However, additional follow-up is necessary to determine any possible long-term deleterious effects associated with this metal-on-metal articulation.     

Total hip arthroplasty with use of the Metasul metal-on-metal articulation. Four to seven-year results

BACKGROUND: Total hip replacements with a metal-on-metal articulation were commonly used until the mid-1970s; most were then abandoned in favor of hip replacement with a metal-on-polyethylene articulation. The reason for this change was primarily early cup loosening, which was more prevalent with these metal-on-metal designs than it was with metal-on-polyethylene designs. In the late 1980s, a metal-on-metal design with improved clearance (adequate space between the femoral head and the acetabular articulation surface to allow fluid film lubrication and clearance of any debris from within this joint), metal hardness, and reproducible surfaces was introduced by Sulzer Orthopedics in Switzerland. Orthopaedic surgeons were interested in this Metasul articulation because the contribution of polyethylene wear particles to the failure of total hip replacements had become evident. This study was undertaken to review the clinical performance of this implant and to determine if early acetabular loosening or revision and wear and osteolysis were prevalent. METHODS: Between 1991 and 1994, seventy patients (seventy hips) had a total hip replacement with the Metasul metal-on-metal articulation and a cemented Weber cup. Nine patients died less than four years after the replacement; none of these deaths were related to the operation. Five patients were not available for radiographic evaluation, but they were contacted and it was known that the hip was not painful and had not been revised. Fifty-six patients (fifty-six hips) had complete clinical and radiographic data four to 6.8 years after the operation, and they made up the study group. The patients were evaluated with use of the Harris hip score, a patient-self-assessment form, and radiographs. RESULTS: At an average of 5.2 years (range, four to 6.8 years) after the operation, the average total Harris hip score for the fifty-three patients who did not have a revision was 89.6 points (range, 62 to 100 points). The average Harris pain score was 41.0 points (range, 30 to 44 points), and the average Harris limp score was 9.4 points (range, 5 to 11 points). One patient had revision of a loose cup, but there were no other loose acetabular components in the series. Two patients had revision of the acetabular component because of dislocation. No patient had a loose or revised femoral component. Therefore, the mechanical failure rate was one (2 percent) of fifty-six patients. Thirty-six of forty-seven patients who completed the patient-self-assessment form rated their result as excellent; seven, as very good; two, as good; one, as fair; and one, as poor. Wear could not be measured on radiographs because of the metal-on-metal articulation. No hip had radiographic evidence of acetabular osteolysis and two hips had calcar resorption, but there was no other radiographic evidence of focal osteolysis. CONCLUSIONS: Our four to seven-year experience with this articulation surface indicates that the clinical results are similar to those of total hip replacements with a metal-on-polyethylene articulation. We believe that the Metasul articulation may have a role in reducing the wear that occurs with total hip replacement. The Metasul articulation appears to be particularly indicated for more active patients. A historical comparison with the reports in the literature of which we are aware indicated that the hips in our study had a lower rate of acetabular revision and loosening than did those with previous metal-on-metal designs and that they had no more acetabular loosening or osteolysis than did those with metal-on-polyethylene articulations followed for an average of five years.     

The argument for the use of Metasul as an articulation surface in total hip replacement

Metasul metal-on-metal articulations have been used for 15 years in approximately 300,000 total hip replacements. We have used Metasul articulations in three clinical studies and have shown clinical success as measured by Harris hip scores and patient self-assessment; we also have had the usual mechanical complications. The only complications have been mechanical, including two cup loosenings and 24 dislocations in a total of 582 patients (619 hips; 3.8%) who had Metasul articulations and were included in these studies. In the randomized study, the group who had Metasul articulations had no clinical results or complications different from the control ceramic-on-polyethylene group. Authors of retrieval results in the literature report low annual linear wear rates and no consequences of elevated Co ion levels. Currently, the scientific evidence of the results of using the Metasul articulation would recommend its continued use in any patient who does not have compromised renal function.     

Survivorship of second-generation metal-on-metal primary total hip replacement

Background  

Second generation metal-on-metal total hip replacements (THR) were introduced in the late 1980s and various studies reported conflicting data on their outcome.     

Zweymueller with metal-on-metal articulation: clinical,radiological and histological analysis of short-term results

BACKGROUND: This is a prospective study. METHOD:. A total of 266 consecutive patients, who received 350 third-generation Zweymueller-SL total hip arthroplasties with metal-on-metal articulation for primary or secondary osteoarthritis, was followed and evaluated clinically, radiologically and histologically. The age of the patients at the time of surgery was 55+/-9 years, (range 25-70 years). Seven ( 3%) patients did not return for their last follow-up evaluation for reasons unrelated to their hip operation. RESULTS: The mean follow-up was 52 months (range 37-92 months). The preoperative Harris hip score was 45+/-19 and increased to 96+/-4 postoperatively. The invalidity of the patients was significantly improved postoperatively ( p<0.001). In all, 97% of the patients were satisfied or very satisfied with the result of the operation. There was no aseptic loosening noted in this series. Revision was done in 6 (1.8%) hips because of septic loosening ( n=5, 1.5%) or technical error ( n=1, 0.3%) during implantation. Dislocation of the prosthesis occurred in the early postoperative period in 2 (0.6%) hips. Periarticular ossification was observed in 30% of the hips (5% Brooker grades III and IV), but without associated disability. During revision surgery, no macroscopic metalosis could be identified in the newly formed hip joint membrane; however microscopic evidence for metalosis (Mirra grades 1 and 2) was seen in all revised hips. The survival for Zweymueller screw socket and stem 7.6 years after implantation was 99.4% and 96.8%, respectively. CONCLUSIONS: This study showed that the short-term results of Zweymueller total hip arthroplasty with metal-on-metal articulation were just as satisfactory as those of a conventional polyethylene on ceramic articulation, while the metal-on-metal articulation does not seem to give rise to new problems or complications.     

Medium-term results of a modern metal-on-metal system in total hip replacement

Since 1988, metal-on-metal articulation from cobalt-chromium-molybdenum alloy was reintroduced into hip arthroplasty as an alternative to metal-on-polyethylene or ceramic-on-polyethylene components. Modular joint surfaces were developed for the second generation metal-on-metal articulation using newly introduced and proven prosthetic implants. Since 1990, 78 patients with 78 uncemented total hip replacements were followed up in a prospective study. The mean followup was 60 months. Three patients were lost to followup. The average age of the patients at the time of surgery was 48.8 years. Thirty-three patients had been operated on previously. No early infections occurred; one late infection occurred after 3 years. Dislocation of the prosthesis occurred in one patient who was lost to followup. In two patients ectopic ossifications were removed 17 and 27 months postoperatively. At revision surgery no metallosis could be identified. At the last followup examination, the Harris hip score was 96.8 points on average. There was no evidence that the metal-on-metal articulation gave rise to new problems or complications. Metal-on-metal articulation reduced wear considerably in the authors' previous experience. It is hoped that foreign body reactions are reduced significantly so that an alternative for total hip replacement in younger and active patients will be available.     

High failure rates with a large-diameter hybrid metal-on-metal total hip replacement: clinical, radiological and retrieval analysis

This study reports the mid-term results of a large-bearing hybrid metal-on-metal total hip replacement in 199 hips (185 patients) with a mean follow-up of 62 months (32 to 83). Two patients died of unrelated causes and 13 were lost to follow-up. In all, 17 hips (8.5%) have undergone revision, and a further 14 are awaiting surgery. All revisions were symptomatic. Of the revision cases, 14 hips showed evidence of adverse reactions to metal debris. The patients revised or awaiting revision had significantly higher whole blood cobalt ion levels (p = 0.001), but no significant difference in acetabular component size or position compared with the unrevised patients. Wear analysis (n = 5) showed increased wear at the trunnion-head interface, normal levels of wear at the articulating surfaces and evidence of corrosion on the surface of the stem. The cumulative survival rate, with revision for any reason, was 92.4% (95% confidence interval 87.4 to 95.4) at five years. Including those awaiting surgery, the revision rate would be 15.1% with a cumulative survival at five years of 89.6% (95% confidence interval 83.9 to 93.4). This hybrid metal-on-metal total hip replacement series has shown an unacceptably high rate of failure, with evidence of high wear at the trunnion-head interface and passive corrosion of the stem surface. This raises concerns about the use of large heads on conventional 12/14 tapers.     

The results at ten years of the Insall-Burstein II total knee replacement. Clinical, radiological and survivorship studies.

We reviewed the outcome of 146 Insall-Burstein II total knee replacements carried out in 121 patients over a period of nearly four years in a general orthopaedic unit. At a mean follow-up of ten years, 94 knees in 78 patients were available for review. Six patients (7 knees) were lost to follow-up and 37 (45 knees) had died. The clinical outcome using the scoring system of the Hospital for Special Surgery (HSS) was excellent or good in 79% of patients, fair in 14% and poor in 7%. The mean preoperative HSS score was 31, improving to 79 at the latest review. Using the newer rating system of the Knee Society, the mean score at ten years was 87 and the mean functional score 56. The arc of flexion improved from a mean preoperative value of 88 degrees to 100 degrees. The 18 patients who had had a previous high tibial osteotomy were analysed separately and were found to have benefited equally from the operation. Nine prostheses were revised, giving a cumulative survival rate of 92.3% at ten years. Radiological evaluation of 104 radiographs showed radiolucent lines around ten tibial components, none of which required revision. Anterior knee pain was a significant problem.     

The Harris-Galante uncemented femoral component in primary total hip replacement at 10 years

Eighty-eight primary femoral reconstructions in 80 patients were performed with the Harris-Galante uncemented femoral stem by 1 surgeon between March 1984 and December 1987. Seventy-seven femoral components in 72 patients were followed for an average 126 months or until femoral revisions. The average age at operation was 54 years (range, 30-70 years). Fifty-two patients were men, and 20 were women. The present article documents the incidence of femoral osteolysis and femoral revision in this series of this type of femoral component at an average of 10 years. Fifteen femoral components (15 of 77, 19%) were revised, 14 (14 of 77, 18%) for aseptic loosening, osteolysis, or fracture through osteolysis. The remaining 62 femoral components were functioning well (average Harris Hip Score 89 points), but 7 (11%) were loose, and 32 (52%) had femoral endosteal lysis. Overall, 19 (25%) were revised or loose, and 46 (46 of 77, 60%) had lysis. The high incidence of femoral lysis and aseptic loosening with this early design of uncemented femoral stem continues to increase at 10-year follow-up.     

Improved results of primary total hip replacement

Background and purpose Over the past 20 years, several changes in treatment policy and treatment options have taken place regarding hip replacement. For this reason, we wanted to investigate the results after hip replacement in terms of revision rate, during a 21-year period among hip replacements reported to the Norwegian Arthroplasty Register.

Methods 110,882 primary total hip replacements were reported to the Norwegian Arthroplasty Register from 1987 through 2007. Risk of revision during the time periods 1993–1997, 1998–2002, and 2003–2007 was compared to that of the reference period 1987–1992. Adjusted Cox regression analyses were performed to compare the risk of revision in different time periods and extended analyses were done to investigate revision within the first postoperative year and after the first year.

Results There was an overall reduced risk of revision in the time periods 1993–1997, 1998–2002, and 2003–2007 compared to the reference period: RR = 0.81 (95% CI 0.77–0.86), 0.51 (CI 0.47–0.55), and 0.77 (CI 0.68–0.85), respectively. The improved results were due to a marked reduction in aseptic loosening of the femoral and acetabular components in all time periods and in all subgroups of prostheses. A change in the timing of revision took place, with more early revisions and fewer late revisions in the later time periods. Revision due to dislocation and infection increased over time.

Interpretation The risk of revision decreased during the study period, due to fewer cases of aseptic loosening of prosthetic components. The best results were obtained with the use of cemented prostheses. Prevention of dislocation and infection should be a major goal in the future, as revision due to these causes increased during the study period.     

Massive wear of an incompatible metal-on-metal articulation in total hip arthroplasty

We report on a case of massive wear because of an incompatible metal-on-metal combination. In a 62-year-old man, a cobalt-chromium (CoCr) inlay and a stainless steel head were paired by accident. Because of persistent pain, revision surgery was performed 7 months later. Histologic analysis of the surrounding tissue revealed massive metallosis. The wear volume was increased by a factor of 18 for the head and 2 for the cup compared with normal metal-on-metal articulation. The serum concentrations of chromium and cobalt were increased by a factor of 20 and 4 over levels of a healthy population, respectively. Incompatible metal-on-metal combinations should be revised immediately. In case of delayed diagnosis, no metal-on-metal articulation should be implanted because of the high volume of metal in the human body.     

28 mm Metasul™ bearings in primary total hip arthroplasty

Assessment of possible low-wear with some former metal-on-metal (MoM) total hip arthroplasties (THA) led to the reintroduction of metallic bearings in the late 80’s. The author reports on two studies of Metasul-28 mm cementless THA. In the first one in a general population, impingement has been the main cause of osteolysis and Co level survey has been a good indicator of Metasul bearing behaviour. In the second study, in a group of 83 less than 50-year-old and active patients, Metasul bearings showed good wear resistance at 7.2 years mean follow-up. In both studies, no general toxic effect could have been detected thus far. According to the current knowledge, it is always reasonable to expect low-wear and better THA longevity with use of MoM bearings under the following conditions: 1) use of a CoCr alloy with high carbide concentration; 2) reduce impingement risk (head without sleeve, slimmer as possible neck, perfectly adapted Morse cone from the same manufacturer, well — oriented components); and 3) prefer cementless acetabular fixation.