Long-term results of alumina-on-alumina hip arthroplasty for osteonecrosis

Alumina-on-alumina bearings in THR may, in theory, provide an effective answer to osteolysis in young patients with ON of the femoral head. The purpose of this retrospective study was to report the long-term results of a series of 52 consecutive alumina THAs (41 patients) done for ON. The mean age of the patients at surgery was 41 years (range, 22-79 years). Cemented femoral stems with a 32-mm alumina head were used. Plain alumina cups were used and were either cemented (39 hips) or press-fit (13 hips). No patients were lost to followup. Sixteen hips have been revised. Aseptic loosening of the socket was the main cause of failure. At an average 16-year followup (range, 11-23.65 years), 26 hips were rated excellent and one hip was rated good. No osteolysis was observed and wear was undetectable. If revision for aseptic loosening was the end point, the rate of survival was 88.5% at 10 years for the socket and 100% at 10 years for the stem. With the alumina-on-alumina hip replacement done for ON, absence of osteolysis can be expected for as many as 24 years after the operation. New methods of socket fixation now are being explored.     

Total hip arthroplasty using an Omniflex modular system: 5 to 12 years followup

We evaluated intermediate-term results of primary cementless Omniflex prostheses. Forty-nine patients (57 hips) with a mean age of 44 years were observed for an average of 8.6 years. The average Harris hip score was 46 points before surgery and 87 points at final followup. Revision was done in five hips (9%) in five patients. Two acetabular components (4%) were revised because of breakage of the polyethylene insert. Three femoral components (5%) were revised because of aseptic loosening. Six femoral components (10%) were radiographically loose. Overall, 11 hips (19%) were considered mechanical failures. Osteolysis was identified around three acetabular components (5%) and around 20 femoral components (35%). Nine hips (16%) had femoral osteolysis around the distal stem tip. The average annual polyethylene liner wear was 0.18 mm. These results were inferior to those using other recent cementless total hip systems.     

Long-term results using the anatomic medullary locking hip prosthesis.

Since the introduction of cementless total hip arthroplasty in the early 1980s, concern has shifted from component loosening toward polyethylene wear and osteolysis. The current review of 223 consecutive unselected Anatomic Medullary Locking femoral and acetabular components extends the followup on a series of patients previously reported on at 5 and 10 years. The purposes are to describe the reasons for revisions and to assess the onset and size of osteolytic lesions, with the hypothesis that osteolysis represents an important cause of loosening. The population included 204 patients (211 hips) with mean followup of 13.9 years (range, 2-18 years). Among them, 122 patients (129 hips) had a minimum 15-year followup. Minimum 2-year radiographs with a mean radiographic followup of 12.2 years (range, 2-18 years) were available for 204 hips (197 patients). Of the entire study group, 39 hips (38 patients) had 44 component revisions, increasing the number of revisions by 24 since this series was reported previously. Twenty-six patients (27 hips) had their first revision surgery more than 10 years after the primary surgery. The most common reason for revision of original components was wear or osteolysis occurring in 22 of the 39 hips (21 of 38 patients). The overall loosening rate was 3.4% (seven of 204) for femoral components and 5.4% (11 of 204) for acetabular components. Twenty-four percent of hips (48 of 204) had evidence of femoral or pelvic osteolytic lesions larger than 1.5 cm2. Femoral osteolysis was not associated with any case of femoral loosening, whereas seven of the 11 loose acetabular components were associated with pelvic lesions larger than 1.5 cm2.     

Similar Wear in Total Hip Arthroplasties with Metallic or Zirconia Femoral Heads

Ceramic femoral heads have been used in an attempt at reducing polyethylene wear of total hip arthroplasties. Clinical results with zirconia femoral heads have been mixed. This study was undertaken to compare the polyethylene wear and incidence of periprosthetic osteolysis in total hip replacements performed using a 28-mm zirconia versus a 28-mm cobalt chromium femoral head. Thirty-five hips with a 28-mm cobalt chromium head and 68 hips with a 28-mm zirconia head were evaluated after a minimum follow-up of 2 years (average, 4.0 years; range, 2.0 to 9.1 years). A monoblock acetabular component was used in all patients. Polyethylene wear was measured in serial radiographs from 58 of the hips utilizing a computer-assisted vector wear technique. Periacetabular osteolysis developed in three patients (two with a zirconia head and one with a cobalt chromium head). The total wear and the annual wear rate were 0.48 mm and 0.11 mm/year for the cobalt chromium heads and 0.53 mm and 0.14 mm/year for the zirconia heads, respectively. We found no benefit with respect to the rate of polyethylene wear or incidence of osteolysis with the use of zirconia femoral heads.     

Low Wear Rates Seen in THAs With Highly Crosslinked Polyethylene at 9 to 14 Years in Patients Younger Than Age 50 Years

Background

Patients 50 years or younger are at high risk for wear-related complications of their total hip arthroplasty (THA) because of their generally higher levels of activity. Highly crosslinked polyethylene (HXLPE) is believed to be more durable for this population than conventional polyethylene because of its improved wear; however, limited information is available on the wear of HXLPE in this population, particularly the wear of HXLPE when it articulates with alternative bearings like Oxinium (Smith & Nephew, Memphis, TN, USA).

Questions/purposes

The purpose of this study was to evaluate two questions relative to this population of patients undergoing THA. First, what was the linear and volumetric wear rate of HXLPE in patients 50 years or younger at a minimum followup of 9 years and was osteolysis observed in any of these hips? Given the potential for damage to the Oxinium femoral head surface, was the wear of HXLPE in the patients with this material similar to the other bearings or was there accelerated or runaway wear that was visible in any of the patients?

Methods

From November 1999 to April 2005, 105 THAs were performed in 95 patients 50 years of age or younger (mean, 42 years; range, 20–50 years). The mean body mass index was 30 kg/m² (range, 17–51 kg/m²).The mean followup was 12 years (range, 9–14 years). Two patients died, five patients (one bilateral) were lost to followup, and one hip was revised elsewhere for pain. The patients’ information was not included in the study, which left 87 patients with 96 hips for analysis. Highly crosslinked polyethylene was the acetabular bearing for all of the hips. We analyzed the linear and volumetric wear of all of the hips using the Martell method. Eighty hips had the same diameter head (28 mm) allowing us to more accurately compare the different bearing materials. The type of femoral head used was related to our sequential use of materials beginning with cobalt chrome (14), ceramic (23) followed by Oxinium (43) in the hips with 28-mm heads. Although cobalt-chrome was used early in this study, our previous experience with ceramic on polyethylene encouraged us to use it as an alternative bearing. The Oxinium was used consecutively for the remaining hips.

Results

The mean wear of the HXLPE after 1 year of bedding-in (true linear wear)was 0.022 mm/year (95% confidence interval [CI], 0.015–0.030 mm/year). The mean volumetric wear of HXLPE after 1 year of bedding-in (true volumetric wear) was 9 mm³/year (95% CI, 4–14 mm³/year). None of the hip radiographs had evidence of loosening or osteolysis. Wear was not associated with femoral head material (p = 0.58 for linear wear/year versus head material and p = 0.52 for volumetric wear/year versus head material).

Conclusions

In our study of patients 50 years of age or younger undergoing THA, the linear and volumetric wear rates of HXLPE were very low regardless of the bearing surface material. The laboratory concerns of Oxinium surface damage are serious but at this time we have not seen high wear of the HXLPE or osteolysis in this population.

Level of Evidence

Level III, therapeutic study.     

Primary total hip arthroplasty with the AML total hip prosthesis

Primary total hip arthroplasty using an uncemented AML total hip prosthesis (trispiked cup and a 4/5 porous coated stem) was performed in 50 patients (52 hips). The average age of the patients at the time of surgery was 47.6 years (range, 19-68 years), and the diagnosis was osteonecrosis of the femoral head in 18 hips, osteoarthritis in 16, fracture of the femoral neck in 14, osteoarthrosis secondary to childhood pyogenic arthritis in two, childhood tuberculous arthritis in one, and traumatic arthritis in one. The average followup was 11.3 years (range, 11-12 years). The average preoperative Harris Hip Score was 59 points, which improved to 90 points. Twenty-five (48%) hips had excellent results, 14 (27%) had good results, three (6%) had fair results, and 10 (19%) had poor results. The overall rate of revision was 15% (eight hips). The rate of revision of the femoral component was 2% (one hip), and the rate of revision of the acetabular component was 15% (eight hips). Twenty (38%) hips had acetabular and femoral osteolysis. Nine (17%) hips had femoral osteolysis only. Thirty-four (65%) hips had an average of 3.3 mm (range, 2-12 mm) of wear in the polyethylene liner. The average wear rate was 0.29 mm (range, 0.17 to 1.04 mm) per year.     

Fixation, polyethylene wear, and pelvic osteolysis in primary total hip replacement

A multicenter retrospective review was performed analyzing 1081 primary total hip replacements in 944 patients using the Harris Galante-I cementless acetabular component with screw fixation. All patients were followed up for a minimum of 5 years with a mean followup of 81 months. Linear polyethylene wear averaged 0.11 mm/year (range, 0-0.86 mm/year). Pelvic osteolysis was seen in 25 patients (2.3%). Migration of the acetabular component was seen in four hips. A subgroup of patients was reanalyzed at a minimum followup of 10 years. The mean linear polyethylene wear rate remained 0.11 mm/year. In this group, only one socket had migrated. There was an association between wear rate and age. On average, younger patients had higher wear rates. The risk for having pelvic osteolysis develop and the need for revision surgery also was age-related. Twenty-two percent of hip replacements (15 hips) in patients younger than 50 years of age at the time of their index operation had pelvic osteolysis develop. In contrast, for patients older than 50 years of age at the time of surgery only 7.8% (eight hips) had osteolysis of the pelvis develop. For patients older than 70 years of age at the time of primary total hip replacement, none had pelvic osteolysis develop.     

Relationship of acetabular wear to osteolysis and loosening in total hip arthroplasty.

Polyethylene wear and the subsequent development of periprosthetic osteolysis are the major factors limiting the longevity of total hip arthroplasties. A minority eventually loosen, but no clinically applicable system exists for accurate early prediction of failure. The relationship between acetabular wear and the development of loosening, osteolysis, and revision was investigated in 235 Charnley low friction arthroplasties. The average age of the patient at surgery was 31.7 years (range, 17-39 years), and the duration of followup averaged 234 months (19.5 years; range, 74-364 months). Total wear averaged 2.1 mm (range, 0-7.2 mm), and the average wear rate was 0.11 mm per year (range, 0-0.55 mm/year), with the wear rate of revised components being twice that of surviving ones (0.19 mm/year versus 0.09 mm/year). The prevalence of osteolysis (33 hips, 14%) and of acetabular and femoral component loosening and revision rose significantly with increasing wear. Osteolysis also was associated significantly with femoral component loosening and revision, but the presence of calcar changes was not (90 hips, 38%). Twenty-five year survivorship exceeded 90% for arthroplasties with a wear rate less than 0.1 mm per year, but 20-year survivorship of acetabular components with a rate greater than 0.2 mm per year was below 30%, and none survived 25 years. For every additional millimeter of wear, the risk of acetabular revision in any one year increased by 45% and for the femur increased by 32%.     

Primary total hip arthroplasty with a cementless porous-coated anatomic total hip prosthesis: 10- to 12-year results of prospective and consecutive series.

We performed a prospective study in 108 consecutive patients (116 hips) who were followed for a minimum of 10 years (10-12 years) after primary total hip arthroplasty using an uncemented porous-coated anatomic (PCA) hip prosthesis. The average age of the patients at operation was 48.4 years (range, 19-85 years), and the diagnosis was avascular necrosis of the femoral head in 46 hips, neglected femoral neck fracture in 27, osteoarthrosis secondary to childhood pyogenic arthritis in 24, childhood tuberculous arthritis in 5, and miscellaneous in 14. The average preoperative Harris Hip Score was 55 points, which improved to 87 points at 11 years. Seventy-five hips (65%) were excellent, 11 (9%) were good, and 30 (39%) were poor. The overall rate of revision was 15% (17 of 116 hips). The rate of revision of the femoral component was 11% (13 of 116 hips), and the rate of revision of the acetabular component was 15% (17 of 116 hips). The prevalence of thigh pain was 28% at 11 years. The increase in the incidence of aseptic loosening of the femoral component was found to explain the high incidence of severe thigh pain at 11 years' follow-up. At 11 years, there was femoral osteolysis in 69 hips (59%) and acetabular osteolysis in 65 hips (56%). At 6 years, 20 hips (17%) showed definite wear of the polyethylene liner. At 11 years, 81 hips (70%) showed definite wear of the polyethylene liner. Because the complication rate of the PCA hip prosthesis with respect to loosening, osteolysis, and excessive wear in the polyethylene liner is high, we abandoned the use of this implant.