QLF is not readily suitable for in vivo denture plaque assessment

Objectives

Current methods available for denture plaque assessment utilise visual and planimetric techniques. This paper evaluates the use of the Quantitative Light-induced Fluorescence system (QLF™) in image capture of denture plaque and the suitability of these images for planimetric plaque measurement. It is proposed that fluorescence imaging could provide a valuable and sensitive standardising method for plaque assessment in clinical trials for denture cleansing products and denture hygiene. Indeed, the detection of red fluorescent plaque using the QLF system is indicative of black-pigmented obligate anaerobes and mature plaque.

Methods

The QLF system was evaluated in a clinical study for use in denture plaque assessment in comparison to white light based image capture.

Results

Despite appearing as a promising system for denture plaque quantification, this study revealed numerous problems associated with the QLF system including small focal depth, thus large numbers of images and processing time were required. In addition, differential fluorescence of acrylic made images unsuitable for plaque quantification.

Conclusion

QLF is unsuitable for in vivo denture plaque assessment. However, the visualisation of red autofluorescence, indicating mature plaque, remains an important clinical use of QLF for denture hygiene assessment.     

Evaluation of canting correction of the maxillary transverse occlusal plane and change of the lip canting in Class III two-jaw orthognathic surgery

Objective:To compare the effect of canting correction in anterior maxillary transverse occlusal planes (AMTOP) and posterior maxillary transverse occlusal planes (PMTOP) on the change of lip canting (LC) in two-jaw surgery (TJS) cases.Materials and Methods:The samples consisted of eight young adult patients (three males and five females, mean age  =  24.1 ± 4.5 years) who had skeletal Class III malocclusion (CIII), facial asymmetry (FA), and LC and who underwent TJS. Two-dimensional lateral and posteroanterior cephalograms and three-dimensional facial scanning taken 1 week before (T1) and 6 months after TJS (T2) were combined using the Morpheus 3D program. Six linear and angular variables were measured and statistically analyzed.Results:When comparing the values of the linear and angular variables at the T1 and T2 stages there was significant canting correction of AMTOP (1.7 mm vs −0.3 mm; 3.0° vs 0.1°), PMTOP (3.5 mm vs 0.1 mm, 3.3° vs −0.1°), and LC (3.0 mm vs 0.7 mm, 4.7° vs 2.1°) (all P < .05). Although the angular change ratios (ΔLC/ΔAMTOP and ΔLC/ΔPMTOP) did not exhibit a significant difference (0.99 vs 0.83), the linear change ratio of ΔLC/ΔAMTOP was significantly higher than that of ΔLC/ΔPMTOP (1.67 vs 0.74, P < .05). The angular change of ΔLC showed a significant correlation with ΔAMTOP (r²  =  0.64; P < .05). However, the linear change of ΔLC was significantly correlated with both the angular and linear changes of ΔAMTOP (r²  =  0.62 and 0.66; both P < .05). Therefore, the amount of LC change was more related to the canting correction of AMTOP than to that of PMTOP.Conclusion:In TJS cases with CIII, FA, and LC, the amount of canting correction of the AMTOP should be considered to predict the actual LC change.     

The short-term treatment effects of face mask therapy in Class III patients based on the anchorage device: Miniplates vs rapid maxillary expansion

Objective:To compare the short-term treatment effects of face mask therapy with miniplates (FM-MP) and face mask therapy with rapid maxillary expansion appliance (FM-RME) in growing Class III malocclusion patients with maxillary hypoplasia.Materials and Methods:Twenty patients were allocated into two groups according to the anchorage device: FM-MP group (n  =  10; mean age  =  11.2 ± 1.2 years; miniplates in the zygomatic buttress area) and FM-RME group (n  =  10; mean age  =  10.7 ± 1.3 years; bonded or banded RME). The face mask was applied for 12 to 14 hours/day in both groups with a force of 400 g/side directed 30° downward and forward from the occlusal plane. Lateral cephalograms were taken before (T1) and after FM-MP or FM-RME therapy (T2). Skeletodental and soft-tissue variables were measured. Paired and independent t-tests were performed for statistical analysis.Results:Both groups exhibited significant forward movement of point A and posterior repositioning and opening rotation of the mandible from T2 to T1. The FM-MP group showed significant protraction of orbitale (ΔSNO), and the FM-RME group showed a decrease in overbite and an increase in Björk sum. Comparing the amount of changes between the two groups, the FM-MP group displayed greater forward movement of the maxilla than the FM-RME group (ΔSNA, ΔA to N perp, all P < .05). However, the FM-RME group exhibited a greater opening rotation of the mandible (ΔSNB, Björk sum, all P < .01; ΔPog to N-perp, P < .05) and labioversion of the maxillary incisors (ΔU1-FH, P < .05).Conclusion:FM-MP therapy induces a greater advancement of the maxilla, less posterior repositioning and opening rotation of the mandible, and less proclination of the maxillary incisors than FM-RME therapy.     

Esthetic comparison of white-spot lesion treatment modalities using spectrometry and fluorescence

Objective:To compare the esthetic improvements of white-spot lesions (WSLs) treated by fluoride, casein phosphopeptide amorphous calcium phosphate (CPP-ACP), or resin infiltration.Materials and Methods:WSLs were created on human enamel and randomly assigned to four groups: NaF (500 ppm), CPP-ACP, resin infiltration (Icon), or distilled deionized water (DDW; control group). The color change (ΔE) of each specimen was measured with a Crystaleye spectrophotometer, and fluorescence loss (ΔQ) was measured by quantitative light-induced fluorescence (QLF), at different time points after treatment: baseline (0 weeks), 2 weeks, 4 weeks, and 6 weeks.Results:The ΔE and ΔQ baseline values for the four groups before the treatments did not differ significantly. Icon treatment improved the WSL color significantly and gave the lowest ΔE (2.9 ± 1.2 on average) compared with other treatments (P < .01). The Icon treatment also resulted in a significant change in the ΔQ of WSLs compared with baseline (P < .01). In the NaF and CPP-ACP treatment groups, ΔQ showed significant recovery compared with the baseline values only after 4 weeks after treatment (P < .05).Conclusions:Resin infiltration is more effective than NaF or CPP-ACP in providing esthetic improvement of WSLs.     

Do total or partial etching procedures effect the rate of white spot lesion formation? A single-center,randomized, controlled clinical trial

Objective:To determine whether total or partial etching procedures influence the appearance of white spot lesions (WSLs).Materials and Methods:This split-mouth, double-blind, controlled, randomized study included 20 patients (mean age 16.75 years), who had class I malocclusion, mild crowding, and satisfactory oral hygiene. A total of 40 maxillary quadrants were randomly allocated to be treated using a total etching (TE) or partial etching (PE) protocol. Quantitative light fluorescence images were captured at the beginning and at 3 (T1) and 6 (T2) months after beginning orthodontic treatmen, as well as when the debonding phase of orthodontic treatment was complete (T3). The presence of pre- and posttreatment WSLs was assessed with quantitative light fluorescence software and analyzed with Student''s t-test.Results:The analyses showed that, at T2, the total etching group had significantly higher ΔQ and A scores than the partial etching group (P < .05). The ΔF scores increased significantly at all timepoints in the TE group, but only at T1 and T3 in the PE group. However, no differences were noted at T3 between the TE and PE groups (P > .05). The inclusion of only right-handed people may have limited the generalizability of the findings. The absence of analyses of the plaque and gingivitis scores of patients was another limitation of this study.Conclusions:WSL formation was observed mostly in maxillary lateral incisor teeth irrespective of the etching technique. Although PE seems to be more successful in the first 6 months, no difference was observed between PE and TE in the long term for WSL formation.     

The longevity of casein phosphopeptide–amorphous calcium phosphate fluoride varnish's preventative effects: Assessment of white spot lesion formation

Objectives:To test how long casein phosphopeptide–amorphous calcium phosphate (CPP-ACP) fluoride varnish prevents enamel demineralization in vitro.Materials and Methods:Human molars and premolars were sectioned buccolingually and randomly assigned to two groups. Standardized pretreatment images of enamel surfaces were obtained using FluoreCam. The control group received no treatment, and the experimental group received an application of CPP-ACP fluoride varnish. Over simulated periods of 2, 4, 8, and 12 weeks, specimens were placed in a toothbrushing simulator, thermocycled, subjected to 9 days of pH cycling, and imaged with FluoreCam. Samples were sectioned and polished for polarized light microscope (PLM) evaluation.Results:There were statistically significant time (P < .001) and varnish (P < .001) effects on area, intensity, and impact of enamel demineralization. The control group showed significant and progressive demineralization over the 12 weeks (P < .001). The experimental group revealed no significant demineralization during the first 4 weeks (P > .05) and significant (P < .001) increases thereafter. Experimental demineralization after 12 weeks was comparable to 2-week demineralization in the controls, with significant between-group differences (P < .001) in enamel demineralization at all time points. PLM of the control and experimental groups revealed lesion depths of 90 ± 34 μm and 37 ± 9 μm, respectively.Conclusions:Within the limitations of this in vitro study, CPP-ACP fluoride varnish prevents enamel demineralization for at least 4 weeks and limits demineralization up to 12 weeks.     

Porcelain Surface Alterations and Refinishing After Use of Two Orthodontic Bonding Methods

Objective:To compare porcelain surfaces at debonding after use of two surface preparation methods and to evaluate a method for restoring the surface.Materials and Methods:Lava Ceram feldspathic porcelain discs (n  =  40) underwent one of two surface treatments prior to bonding orthodontic brackets. Half the discs had sandblasting, hydrofluoric acid, and silane (SB + HF + S), and the other half, phosphoric acid and silane (PA + S). Brackets were debonded using bracket removing pliers, and resin was removed with a 12-fluted carbide bur. The surface was refinished using a porcelain polishing kit, followed by diamond polishing paste. Measurements for surface roughness (Ra), gloss, and color were made before bonding (baseline), after debonding, and after each step of refinishing. Surfaces were also examined by scanning electron microscopy (SEM). Data was analyzed with 2-way ANOVA followed by Tukey HSD tests (α  =  0.05).Results:The SB + HF + S bonding method increased Ra (0.160 to 1.121 µm), decreased gloss (41.3 to 3.7) and altered color (ΔE  =  4.37; P < .001). The PA + S method increased Ra (0.173 to 0.341 µm; P < .001), but the increase in Ra was significantly less than that caused by the SB + HF + S bonding method (P < . 001). The PA + S method caused insignificant changes in gloss (41.7 to 38.0) and color (ΔE  =  0.50). The measurements and SEM observations showed that changes were fully restored to baseline with refinishing.Conclusions:The PA + S method caused significantly less damage to porcelain than the SB + HF + S method. The refinishing protocol fully restored the porcelain surfaces.     

The effect of changes in primary attending doctor coverage frequency on orthodontic treatment time and results

Objective:To determine whether changes in primary attending (PA) doctor coverage frequency caused an increase in orthodontic treatment time or a decrease in the quality of treatment results in a postgraduate orthodontic clinic. The effect of T1 Peer Assessment Rating (PAR) scores on PA doctor coverage frequency, treatment times, and results was also evaluated.Materials and Methods:A sample of 191 postorthodontic subjects was divided into three groups based on PA doctor coverage (high, medium, or low). Treatment times, treatment results, and other variables were compared between the three PA coverage groups. Additionally, the sample was divided into three groups based on T1 PAR scores. Attending coverage frequency, treatment times, and results were compared between the T1 PAR groups.Results:No statistically significant differences were found in treatment time (P  =  .128) or results (P  =  .052). There were no statistically significant differences in the mean scores for T1 PAR (P  =  .056), T2 PAR (P  =  .602), patient age at T1 (P  =  .747), total appointments (P  =  .128), missed appointments (P  =  .177), or cancelled appointments (P  =  .183). Statistically significant differences were found between the low T1 PAR group and the medium and high T1 PAR groups (attending coverage, P  =  .008; results, P < .001; treatment time, P  =  .001).Conclusions:Under the conditions of this study, variations in PA doctor coverage frequency did not lengthen orthodontic treatment or reduce the quality of treatment results. Low T1 PAR scores were associated with less PA coverage, less change in PAR, and shorter treatment times.     

Effect of posterior impaction and setback of the maxilla on retropalatal airway and velopharyngeal dimensions after two-jaw surgery in skeletal Class III patients

Objective:To evaluate the changes in retropalatal airway and velopharyngeal dimensions after posterior impaction (PI) only or PI and setback (PI/SB) of the maxilla in patients with skeletal Class III undergoing two-jaw surgery.Materials and Methods:Subjects consisted of 60 Class III patients treated with two-jaw surgery. They were divided into two groups: group 1 (n  = 30; PI of the maxilla; mean  =  2.6 mm) and group 2 (n = 30; PI/SB of the maxilla; mean  =  2.8 mm and 1.8 mm, respectively). Using three dimensional computed tomography images taken 1month before surgery (T0) and at least 6 months after surgery (T1), retropalatal airway volume, minimum cross-sectional area, and lateral and anteroposterior (AP) dimensions of minimum cross-sectional area, soft palate angle, soft palate length, and pharyngeal depth were measured. A paired t-test and independent t-test were used for statistical analysis.Results:Group 1 showed increase in retropalatal airway volume and minimum cross-sectional area (P < .01 and P < .05, respectively). Group 2 exhibited decrease in retropalatal airway volume, minimum cross-sectional area, and lateral and AP dimensions of minimum cross-sectional area (all P < .01). Although groups 1 and 2 showed an increase in soft palate length (P < .01 and P < .001, respectively), pharyngeal depth significantly increased only in group 1 (P < .01). Groups 1 and 2 were significantly different in retropalatal airway volume, minimum cross-sectional area, and AP dimension (P < .05, P < .001, and P < .05, respectively).Conclusion:Because the direction of surgical movement in the maxilla can determine the changes in the retropalatal airway and velopharyngeal dimensions, it is recommended that clinicians investigate whether patients suffer from sleep-related breathing disorders before performing PI/SB of the maxilla.     

Factors affecting orthodontists' management of the retention phase

Objective: To test the null hypothesis that orthodontist characteristics and factors related to retainer choice do not influence the management of the retention phase with regard to frequency and duration of follow-up care provided.Materials and Methods:Orthodontists (n  =  1000) were randomly selected to participate in an online survey divided into three categories: background, retainer choice, and time management.Results:Of the 1000 selected participants, 894 responded. When deciding the type of retainer to use, the following were considered most frequently: pretreatment malocclusion (91%), patient compliance (87%), patient oral hygiene (84%), and patients'' desires (81%). Orthodontists who considered the presence of third molars (P  =  .03) or “special needs” patients (P  =  .02) had significantly more follow-up visits than those who did not. When vacuum-formed retainers (VFRs) were prescribed, there were significantly fewer visits (P  =  .02) compared to when other types of retainers were used. As practitioner experience increased, so did the number of visits (P < .0001). Orthodontists who considered the primary responsibility of retention to fall on the patient had significantly fewer follow-up visits (P < .0001) than those who considered it either a joint or orthodontist-only responsibility.Conclusions:The null hypothesis was rejected because the number of follow-up visits during the retention phase was affected by practitioner experience, whether VFRs were used, whether the orthodontist considered the presence of third molars or special-needs patients when choosing the type of retainer, and to whom the orthodontist attributed responsibility during the retention phase.     

Assessment of pharyngeal airway volume in adolescent patients affected by bilateral cleft lip and palate using cone beam computed tomography

Objective:To test the null hypothesis that there were no significant differences for pharyngeal airway volumes between the adolescent patients affected by bilateral cleft lip and palate (BCLP) and well-matched controls using cone beam computed tomography.Materials and Methods:The study sample consisted of 16 patients (11 female and 5 male; mean [SD] age 14.1 [2.1] years) affected by BCLP and 16 patients (10 female and 6 male; mean [SD] age 13.4 [2.0] years) as age- and sex-matched control group. Craniofacial measurements and pharyngeal airway dimension, area, and volume measurements of patients in both groups were calculated and statistically examined using Student''s t-test and multiple linear regression analyses.Results:Statistically significant differences were found between the BCLP and control groups for SNB (P < .05), SN-GoGn (P < .05), Co-A (P < .05), PAS (P < .01), minAx (P < .01), and oropharyngeal airway volume (P < .05). The most predictive variables for oropharyngeal airway volume were found as PAS (r  =  .655 and P  =  .000) and minAx (r  =  .787 and P  =  .000).Conclusions:The null hypothesis was rejected. Oropharyngeal (P < .05) and total (P > .05) airway volumes were found to be less in the BCLP group, and thus the treatment choice in these patients should have positive effects on the pharyngeal airway.     

Skeletal and Soft Tissue Point A and B Changes Following Orthodontic Treatment of Nepalese Class I Bimaxillary Protrusive Patients

Objectives:To test the hypothesis that there is no correlation in the interrelationships of skeletal and soft tissue points A and B with anterior teeth retraction.Materials and Methods:Thirty adult Class I bimaxillary protrusion patients treated with preadjusted appliances after first premolar extraction were included. Pretreatment and posttreatment variables were compared using paired t-test, and the relationship of soft and hard tissue variables was studied using Pearson correlation coefficient and linear regression equation.Results:Mean point A and soft tissue point A (sA) were retracted 2.7 mm (P < .001) and 1.7 mm (P < .001), and mean point B and soft tissue point B (sB) were retracted 2.1 mm (P < .001) and 1.2 mm (P < .001), respectively. Mean ratio of retraction of point A with sA and point B with sB was 1.5∶1 and 1.7∶1, respectively. A significant degree of correlation existed between retraction of point A and soft tissue point A (r  =  0.648, P < .01) and point B and soft tissue point B (r  =  0.806, P < .01). Linear regression analysis used to predict the changes in sA and sB showed significant relationship between point A and sA (r  =  0.543, F  =  11.7, R²  =  0.29, P < .001) and point B and sB (r  =  0.825, F  =  59.7, R²  =  0.68, P < .001). Decreases in hard and soft tissue convexity were due to the retraction of the skeletal and soft tissue points A and B in addition to the lips retraction.Conclusions:The hypothesis is rejected. Retraction of skeletal point A and B lead to retraction of sA and sB under controlled root positions. Nearly proportionate changes existed in the skeletal points and overlying corresponding soft tissue points.     

Changes in temporomandibular joint disc position and form following Herbst and fixed orthodontic treatment

Objective:To determine the changes in the position and form of the temporomandibular joint articular disc in adolescents with Class II division 1 malocclusion and mandibular retrognathism treated with the Herbst appliance (phase I) and fixed orthodontic appliance (phase II).Materials and Methods:Thirty-two consecutive adolescents went through phase I of treatment and 23 completed phase II. The temporomandibular joints were evaluated qualitatively by means of magnetic resonance images at the beginning of treatment (T1), during phase I (T2), at the end of phase I (T3), and at the end of phase II (T4).Results:Significant changes in disc position were not observed with the mouth closed between T1 × T3 (P  =  .317), T3 × T4 (P  =  .287), or T1 × T4 (P  =  .261). At T2, on average, the disc was positioned regressively. With the mouth open, no difference was observed between T1 × T3 (P  =  .223) or T1 × T4 (P  =  .082). We did observe a significant difference between T3 × T4 (P < .05). Significant changes in the disc form were found with the mouth closed between T1 × T2 (P < .001) and T2 × T3 (P < .001).Conclusions:At the end of the two-phase treatment, in general terms, the position and form of the initial articular discs were maintained; however, in some temporomandibular joints some seemingly adverse effects were observed at T4.     

Periodontal health of anterior teeth with two types of fixed retainers

Objective:To compare the periodontal health of maxillary and mandibular anterior teeth retained with two types of fixed retainers.Materials and Methods:A fixed straight retainer (SR) group had 39 subjects, and a fixed wave retainer (WR) group had 35 subjects. Subjects were between the ages of 13 and 22 years and had been in fixed retention for 2 to 4 years. Pocket probing depths, bleeding on probing, plaque index, calculus index, recession, and gingival crevicular fluid volume were compared between the two retainer groups. A four-question oral hygiene survey was given to each subject. The Mann-Whitney U-test and Fisher exact test was used to analyze the data.Results:There was no clinically significant difference between the retainer groups regarding plaque index, gingival crevicular fluid volume, calculus index, recession, bleeding on probing, and pocket probing depths. A statistically significant increase in the reported frequency of flossing (P  =  .006) and ease of flossing (P < .001) was associated with the WR group. There was no significant difference between the groups in reported frequency of brushing and comfort of the retainer.Conclusions:Under the conditions of this study, no clinical difference was found in the periodontal health of anterior teeth retained with a SR or WR for a period of 2 to 4 years. Subjects in the WR group reported an increase in frequency and ease of flossing.     

Three-dimensional analysis of molar compensation in patients with facial asymmetry and mandibular prognathism

Objective:To evaluate the characteristic transverse dental compensations in patients with facial asymmetry and mandibular prognathism and to compare features of dental compensations between two types of mandibular asymmetry using 3-dimensional (3D) cone-beam computed tomography (CBCT).Materials and Methods:Seventy-eight adult patients with skeletal Class I (control group; n  =  33; 19 men and 14 women) or skeletal Class III with facial asymmetry (experimental group; n  =  45; 23 men and 22 women) were included. The experimental group was subdivided into two groups according to the type of mandibular asymmetry: translation type (T-type; n  =  20) and roll type (R-type; n  =  19). CBCT images were acquired before orthodontic treatment and 3D analyses were performed.Results:The transverse dental distance was significantly different between the two groups only at the palatal root apex of the maxillary first molar (P < .05). In the experimental group, the first molar axes were compensated significantly on both arches except the maxillary nondeviated side. The vertical molar heights were different between the two groups only on the maxillary arch (P < .001). The R-type showed greater mandibular ramal length difference and menton deviation than the T-type (P < .001). In the R-type, transverse compensation of the maxillary first molars was more obvious than with the T-type, which resulted in canting in the maxillary occlusal plane.Conclusions:Mandibular asymmetry with prognathism showed a characteristic transverse dental compensation pattern. The mandibular asymmetry type influenced the amount and direction of molar compensation on the maxillary arch.     

Morphometric evaluation of changes in the alveolar bone and roots of the maxillary anterior teeth before and after en masse retraction using cone-beam computed tomography

Objective:To evaluate the morphometric changes in the alveolar bone and roots of the maxillary anterior teeth (MXAT) after en masse retraction with maximum anchorage (EMR-MA).Materials and Methods:The samples consisted of 37 female adult patients who had Class I dentoalveolar protrusion (CI-DAP) and were treated by extraction of the first premolars and EMR-MA. Using three-dimensional cone-beam computed tomography taken before treatment and after space closure, the maxillary central incisors (MXCI, N  =  66), lateral incisors (MXLI, N  =  69), and canines (MXC, N  =  69) were superimposed using individual reference planes. After alveolar bone area (ABA), vertical bone level (VBL), root length (RL), root area (RA), and prevalence of dehiscence (PD) were measured at the cervical, middle, and apical levels, statistical analyses were performed.Results:On the palatal side, ABA significantly decreased in all levels of MXAT (P < .001; middle of MXC, P < .01). MXCI and MXLI exhibited a greater decrease in the ratio of change in palatal ABA than did MXC (cervical, P < .01; middle and apical, P < .05; total, P < .001). Palatal/labial ABA ratios decreased in MXCI (cervical, middle, total, P < .001; apical, P < .05) and MXLI (cervical, P < .001; apical, P < .05). They showed greater amounts and ratios of change in VBL on the palatal side compared to the labial side (all P < .001). The palatal side showed more PD in the cervical area than did the labial side (MXCI and MXLI, P < .001; MXC, P < .01). Significant root resorption occurred in MXAT (RL and RA, all P < .001).Conclusions:During EMR-MA in cases with CI-DAP, ABA and VBL on the palatal side and RL and RA of MXCI and MXLI were significantly decreased.     

Dentoskeletal changes following mini-implant molar intrusion in anterior open bite patients

Objective:To evaluate skeletal and dental changes after intrusion of the maxillary molars in subjects with anterior open bite.Materials and Methods:This retrospective cephalometric study evaluated skeletal and dental changes resulting from the use of maxillary orthodontic mini-implants in 31 consecutively treated patients. Radiographs were taken at the start and end of maxillary molar intrusion to evaluate the associated changes. Statistical analysis was performed using a one-sample t-test.Results:The mean treatment observation time was 1.31 years (SD  =  2.03). The maxillary first molars (P  =  0.0026) and second molars (P  =  0.039) were intruded. However, the mandibular first molars (P  =  0.0004) and second molars (P  =  0.003) erupted in adolescent patients. Both the maxillary and mandibular first molars inclined distally (P  =  0.025 and P  =  0.044, respectively). The mandibular plane angle decreased (P  =  0.036), lower facial height decreased (P  =  0.002), and the occlusal plane angle increased (P  =  0.009). The overbite increased (P < .0001). The ANB angle decreased (P < .0001). Mandibular dental and skeletal changes were more apparent in adolescents, while adults tended toward maxillary changes.Conclusions:Vertical traction from orthodontic mini-implants reduces the maxillary posterior dentoalveolar height, thereby assisting orthodontic closure of anterior open bite. However, simultaneous eruption or extrusion of the mandibular molars should be controlled. Adolescent patients tend to demonstrate more favorable effects of mandibular autorotation than do adults.     

Response of the maxillary dentition to a statically determinate one-couple system with tip-back mechanics: A prospective clinical trial

Objective:To quantify the effects of tip-back mechanics on the maxillary first molars and incisors.Materials and Methods:Sixteen subjects with Class II end-on malocclusion were treated with an intrusion arch to achieve distalization of the maxillary molar through tip-back mechanics. Lateral cephalograms were taken prior to molar tip-back (T1), after molar tip-back (T2), and after molar root uprighting (T3). Data were analyzed using the Friedman’s and Wilcoxon signed rank tests to evaluate differences in time points (P ≤ .016).Results:The maxillary first molar distalized 1.53 mm (P = .001) with 6.65° (P = .001) of distal tipping and 0.86 mm (P = .001) of extrusion at T2. Minor relapse of the first molar (mesial direction) was seen at T3. The maxillary incisors flared labially 0.4 mm, and the incisor root apex moved palatally 1.19 mm (P = .005) at T2. At T3, the incisor root apex moved palatally 1.5 mm (P = .003) from T1. An angular change from T1 of 3.31° (P = .008) and 3.53° (P = .014) was seen at T2 and T3, respectively, as a result of palatal root movement of the maxillary incisors.Conclusions:A significant amount of distalization of maxillary molars was attained at the crown level with tip-back mechanics. Palatal root angulation change was significant in the incisors with minimal anteroposterior movement of the incisal edge.     

Analysis of smile esthetics in American Board of Orthodontic patients

Objective:To investigate the common denominators of an esthetically pleasing smile in patients who were considered to be successfully treated upon the submission to American Board Orthodontics (ABO) clinical examination.Material and Methods:A total of 462 patients were examined. Ninety subjects that fulfilled the inclusion criteria were included. Standardized digital smile photographs of the subjects were rated by 30 panel members, including orthodontists, general dentists, and parents of orthodontic patients, using a numeric version of the visual analog scale. Three groups were formed using the mean esthetic score ± standard deviation range: unattractive (n  =  21), average (n  =  47), and attractive (n  =  22) smiles. Eleven smile characteristics were digitally measured on the photographs and compared between the groups using one-way analysis of variance and χ² tests. Additionally, regression analyses were used to investigate the association of the smile characteristics with the esthetic score.Results:A significant difference was found between the three groups for the comparison of smile arc relationship (P < .001). When all the variables used in this study were entered in the regression analysis, a positive association was found (r  =  0.658; r²  =  0.434; P < .001). Additionally, two models were defined using stepwise regression. The first model included the smile arc (r  =  0.478; r²  =  0.228; P < .001), and the second model had both the smile arc and right gingival display/visible dentition display ratio (r  =  0.567; r²  =  0.321; P < .001).Conclusions:A harmonious smile arc relationship and less gingival display during a smile are significantly associated with smile attractiveness in patients considered successfully treated according to ABO standards.     

Assessing anteroposterior basal bone discrepancy with the Dental Aesthetic Index

Objective:To investigate dental appearance and cephalometric features, using a sample of orthognathic and/or orthodontic patients. A special interest was to identify the relationship of the Dental Aesthetic Index (DAI) with anteroposterior basal bone discrepancy (APBBD) and cephalometric indicators.Materials and Methods:A full sample of 159 patients in two Japanese hospitals was used. Each patient was assessed with a preorthodontic dental cast and cephalometric radiography.Results:Malocclusion with APBBD was more prevalent among high DAI subjects (P  =  .034, OR  =  1.04, 95% CI: 1.00–1.08), Class III malocclusion patients (P  =  .048, OR  =  2.32, 95% CI: 1.01–5.34) and male patients (P  =  .008, OR  =  2.96, 95% CI: 1.33–6.61). Participants scoring 88 points (the highest score in this sample) of the DAI had 16.84 times the risk of APBBD of those who scored 17 points (the lowest score in this sample). Patients with APBBD presented with a greater adjusted ANB angle (t  =  −8.10, P < .001) and a larger adjusted A-B/NF appraisal (t  =  −9.65, P < .001). The SNA angle (P < .001), the SNB angle (P  =  .002), the adjusted ANB angle (P  =  .001), and the adjusted A-B/NF appraisal (P  =  .035) were associated with DAI scores in cubic regression models.Conclusion:This study has demonstrated a relationship between the DAI and APBBD. Feasibility of using the adjusted ANB angle and the adjusted A-B/NF appraisal to assess severity of APBBD has been confirmed. The DAI may provide a supportive method to evaluate orthognathic needs. Future investigations are indicated.