Design,statistical optimisation,characterisation and pharmacodynamic studies on Pioglitazone hydrochloride floating microparticles

Abstract

The purpose of this study was to develop floating microparticles containing Pioglitazone HCl, for controlled release and perform pharmacodynamic studies. The FTIR and DSC studies revealed that there is no interaction between drug and excipients used. The 2² factorial design was employed to evaluate the effect of drug: polymer (total) and Eudragit RS 100: Eudragit RL 100. The floating microparticles were prepared by solvent evaporation technique. The predicted and actual values of drug release at 1?h, 8?h and drug entrapment were 38.307%, 77.76%, 84.25% and 38.712%, 76.237% and 84.62%, respectively. XRD and SEM studies showed reduced crystallinity of drug and spherical microparticles. Buoyancy studies revealed good floating of particles for 12?h. Pharmacodynamic studies showed significant reduction in blood glucose levels in male New Zealand rabbits. The results demonstrate the feasibility of the factorial design in successfully developing floating microparticles of Pioglitazone HCl for controlled release.     

Development of Extended-Release Solid Dispersions of Nonsteroidal Antiinflammatory Drugs with Aqueous Polymeric Dispersions: Optimization of Drug Release via a Curve-Fitting Technique

Extended-release solid dispersions of nonsteroidal antiinflammatory drugs were prepared by using aqueous polymeric dispersions of Eudragit RS30D and Eudragit RL30D as the inert carriers. The effects of different polymer ratios of Eudragit RS30D and Eudragit RL30D, different particle sizes, and different combination of various formulations of solid dispersions on the in vitro release kinetics of drugs from the dosage forms were investigated. A computer curve-fitting process was developed to choose the optimum formulation of the solid dispersion with the desired drug release profile. This process might offer the advantages of efficiency and simplicity in the formulation development of extended-release solid dispersions.     

Preparation and in vitro evaluation of slow release ketoprofen microcapsules formulated into tablets and capsules

Abstract

Ketoprofen powder was encapsulated with Eudragit RL/RS polymer solutions in isopropanol-acetone 1:1, using a simple and rapid method. Microcapsules were prepared using Eudragit solutions with different RL/RS ratios. The encapsulation process produces free-flowing microcapsules with good drug content and marked decrease in dissolution rate. The retardation in release profile of ketoprofen from microcapsules was a function of the polymer ratio employed in the encapsulation process. In vitro release of ketoprofen from microcapsules either filled in gelatin capsules or compressed into tablets, using calcium sulphate as diluent, confirmed the efficiency of the encapsulation process for preparing prolonged release medication. A capsule formulation with optimum sustained-release profile was suggested.     

Sustained release spherical agglomerates of polymethacrylates containing mefenamic acid: in vitro release,micromeritic properties and histological studies

Mefenamic acid (MA) spherical agglomerates (SAs) were prepared with various polymethacrylates having different permeability characteristics (Eudragit RS 100, Eudragit RL 100 and Eudragit L 100) and also with combination of Eudragit RS 100 and Eudragit L 100 in different ratios. SAs were prepared by spherical crystallization method using ethanol/dichloromethane solvent (crystallization) system. The influence of various formulation factors on the encapsulation efficiency, as in vitro drug release, and micromeritic properties was investigated. Target release profile of MA was also drawn. The yields of preparation and the encapsulation efficiencies were high for all formulations. The shape and surface characteristics of SAs were observed by a scanning electron microscope. The particle sizes are in the range of 0.219?±?0.1 to 0.482?±?0.25?mm (mean ± confidence interval t_95%). In addition, histological studies showed that the administration of MA in SAs containing Eudragit RS/L provided a distinct tissue protection in the stomach and duodenum. Differential scanning calorimetry and X-ray diffraction of powder studies showed that MA particles crystallized in the presence of polymethacrylates did not undergo structural modifications.     

Engineering polymer blend microparticles: An investigation into the influence of polymer blend distribution and interaction

The aim of this work was to understand the influence of polymer interaction and distribution on drug release from microparticles fabricated from blends of polymers. Blends of pH dependent polymer (Eudragit S, soluble above pH 7) and pH independent polymer (Eudragit RL, Eudragit RS or ethylcellulose) were incorporated into prednisolone loaded microparticles using a novel emulsion solvent evaporation method. Microparticles fabricated from blends of Eudragit S and Eudragit RL or RS did not modify drug release compared to microparticles fabricated from Eudragit S alone. This can be attributed to the high degree of miscibility of Eudragit S with Eudragit RS or Eudragit RL within the microparticles as confirmed by glass transition temperature measurements and confocal laser scanning microscopy. In contrast, microparticles prepared from blends of Eudragit S (75%) and ethylcellulose (25%) extended the release of prednisolone at pH 7.4 (compared to Eudragit S microparticles). This change in release profile was related to the immiscibility of Eudragit S and ethylcellulose as assessed by thermal analysis, and confirmed by microscopy which showed pores within the microparticle structures following dissolution of the Eudragit S domains. The ability of water insoluble polymers to extend drug release from enteric polymer microparticles is dependent on the miscibility and interaction of the polymers. This knowledge is important in the design of pH responsive microparticles capable of extending drug release in the gastrointestinal tract.     

酒石酸美托洛尔缓释微丸的制备及处方因素考察

目的：选用Eudragit RS 30 D与Eudragil RL30D两种包衣材料，制备日服2次的酒石酸美托洛尔缓释徽丸，并对其处方因素进行考察。方法：采用Glatt流化床底喷溶液上药法制备载药微丸，考察缓释聚合物Eudragit RS 30D与Eudragit RL 30D的不同质量配比（2：3，7：3和9：1）、聚合物包衣增重（10％，20％和30％）以及增塑利嗣量（10％，20％和40％）和放置时间对药物释放的影响。结果：当Eudragit RS 30D与Eudragit RL 30D的质量比为9：1，聚合物包衣增重为20％，增塑剂用量为20％时，药物的释放行为符合中国药典对缓释制剂释放度的相关规定。结论：通过调整Eudragit RS 30D与Eudragit RL 30D之间的比例，或提高聚合物包衣增重等手段，能使酒石酸美托洛尔载药徽丸具备较理想的缓释效果。     

Preparation and in vitro evaluation of Eudragit microspheres containing acetazolamide

The aim of this study was to prepare and evaluate Eudragit (RS and RL) microspheres containing acetazolamide. Microspheres were prepared by solvent evaporation method using acetone/liquid paraffin system. The influence of formulation factors (stirring speed, polymer:drug ratio, type of polymer, ratio of the combination of polymers) on particle size, encapsulation efficiency and in vitro release characteristics of the microspheres were investigated. The yields of preparation and the encapsulation efficiencies were high for all formulations the microspheres were obtained. Mean particle size changed by changing the polymer:drug ratio or the stirring speed of the system. Although acetazolamide release rates from Eudragit RS microspheres were very slow and incomplete for all formulations, they were fast from Eudragit RL microspheres. When Eudragit RS was added to Eudragit RL microsphere formulations, release rates slowed down and achieved the release profile suitable for peroral administration.     

硝苯地平膜控型控释微丸的制备及体外评价

目的研究硝苯地平(NF)膜控型24 h控释微丸的处方与工艺,并考察其体外释放特性。方法采用液相层积、丸芯上药法制备载药速释微丸,以Eudragit RL100、RS100为包衣材料,流化床悬浮包衣法制备膜控型控释微丸,并对影响微丸释放的处方因素进行了考察。通过与市售渗透泵片拜新同的体外释放度的对比研究,探讨硝苯地平膜控型控释微丸的体外释药特征。结果调整Eudragit RL100、RS100的比例、衣层厚度、致孔剂的用量,可以改变药物的释放速率。当Eudragit RL100、RS100的比例为3∶7,包衣增重为6%时,制备的控释微丸体外释药与市售渗透泵片相似(f2=62.8),具有良好的零级释放特性。结论以丸芯上药法,Eudragit RL100、RS100为控释材料制备的NF膜控型控释微丸,具有良好的零级释放特性,结果可为硝苯地平多单元控释制剂的研究开发提供参考。     

Poly(epsilon-caprolactone) and Eudragit microparticles containing fludrocortisone acetate

Substitutive hormonal therapies have to be administered for long periods. Thus, the development of sustained-release forms, as microparticle suspensions, is interesting in order to improve patient compliance by reducing dosing frequencies and side effects. The aim of this work was to compare different formulations of fludrocortisone microparticles for the treatment of mineralocorticoid insufficiency. The study was done with different polymers (poly(epsilon-caprolactone), Eudragit RS and Eudragit RL) and different processes (O/W solvent evaporation methods and S/O/W evaporation methods). The use of a suspension of micronized drug in dichloromethane as dispersed phase (S/O/W method) significantly improved the process. Whereas low concentrations of FLU dissolved in the dispersed phase led to smooth-surface homogeneous microparticles and poor incorporation efficiency (5.8-7.3%); suspensions of FLU led to microparticles with numerous crystals on their surfaces (S/O/W microparticles) and high incorporation efficiency (about 79%). However, the best release profiles were obtained with microparticles prepared with 7.5 mg/ml of dichloromethane, near saturation. Moreover, the use of mixtures of poly(epsilon-caprolactone), Eudragit RS and RL did not improve the release profiles.     

Preparation and evaluation of slow-release pan-coated indomethacin granules

Abstract

Granules containing indomethacin crystals are coated with Eudragit solutions of different RL/RS ratios using a pan coating technique. The process is reproducible with regard to drug content, inexpensive and the formed granules were directly compressed into tablets. In vitro release of indomethacin from coated granules, tablets and capsules was studied as a function of different ratios of Eudragit RL/RS in the coating solution. The release of the drug was significantly reduced by the coating process in comparison with a formulation made from uncoated granules, prepared using 10 per cent gelatin solution as a binder. Release data were found to follow a diffusion-controlled model.     

Novel Biomaterial for Transdermal Application: In vitro and In vivo Characterization

The objective of the present study was to evaluate a novel film forming biomaterial for its potential application in the preparation of unilaminate transdermal adhesive matrix systems. The biomaterial, Damar Batu (DB), was tried alone and in combination with Eudragit RL100 as a matrixing agent in the preparation of transdermal patches. Developed transdermal patches of Diltiazem hydrochloride (DH) were evaluated for thickness uniformity, weight uniformity, folding endurance and drug content. USP dissolution apparatus V was used for in vitro drug release studies. Modified Franz diffusion cell used for permeation study using excised human cadaver skin. Total 6 formulations were developed and on the basis of in vitro drug release and in vitro skin permeation profile F5 composed of DB: Eudragit RL100 (60:40) and carrying 20 %w/w DH was selected as an optimized formulation for in vivo study. The in vivo study results showed that F5 achieved the Cmax of about 269.76?±?1.52?ng/mL in 6?h and sustained the release of the drug till 24?h. The skin irritation study results proved that the novel biomaterial is non-sensitizing and non-irritating. Drug-polymer interaction study carried out to check the compatibility of drug and polymer showed the intactness of the drug in the formulation proving the compatibility of the polymer. It can be proposed from the outcome of the present study that by applying suitable adhesive layer and backing membrane, DB: Eudragit RL100 (60:40) transdermal patches can be of potential therapeutic use.     

Eudragit? Microparticles for the Release of Budesonide: A Comparative Study

This study compares the behaviour of budesonide-containing microparticles made of Eudragit^®RS or Eudragit^®RS/Eudragit^®RL 70:30 (w/w) prepared either by solvent evaporation or spray-drying technique. The loading efficiency of budesonide within microparticles was about 72% for microparticles prepared by solvent evaporation and around 78% for spray-dried microparticles. Thermal analyses were assessed to collect information about the structural stability of budesonide within the polymeric microspheres. The in vitro release was performed using simulating gastric (fasted state simulated gastric fluid) and intestinal (fasted state simulated intestinal fluid) fluids as the receiving solutions. After 3 h the drug release from Eudragit^®RS/Eudragit^®RL microparticles was about 6-fold higher than that obtained in the case of monopolymer microparticles. Using fasted state simulated intestinal fluid the drug was released between 4 and 30% in both types of preparations. Eudragit^®RS microparticles showed a better protection of the drug from gastric acidity than those of Eudragit^®RS/Eudragit^®RL allowing us to propose Eudragit^®RS microparticles as a hypothetical system of colon specific controlled delivery.     

Ocular inserts for controlled delivery of pefloxacin mesylate: preparation and evaluation

Pefloxacin mesylate is a flouroquinolone antibacterial drug effective in the treatment of bacterial conjunctivitis. The objective of the present work was to develop ocular inserts of pefloxacin mesylate and evaluate their potential for sustained ocular delivery. Reservoir-type ocular inserts were prepared by the film casting technique in teflon coated Petri dishes and characterized in vitro by drug release studies using a flow-through apparatus that simulated the eye conditions. Six formulations were developed, which differed in the ratio of polymers Eudragit RS 100 and Eudragit RL 100 used for the preparation of the rate controlling membrane. All formulations carried 0.72 mg pefloxacin mesylate, 2.69 mg polyvinyl pyrrolidone (PVP) K-30, plasticizers, propylene glycol (10% m/m) and dibutyl phthalate (15%, m/m). The optimized formulation was subjected to microbiological studies, in vivo studies, interaction studies, and stability studies to assess the effectiveness of the formulation. Cumulative drug released from the formulation ranged from 90-98% within 48 to 120 hours. On the basis of in vitro drug release studies, the formulation with Eudragit RS 100/Eudragit RL 100 (4:1) was found to be better than the other formulations and it was selected as an optimized formulation. On the basis of in vitro, microbiological, in vivo drug release, interaction and stability studies, it can be concluded that this ocular insert formulation provided the desired drug release in vitro for 5 days and remained stable and intact at ambient conditions.     

Sustained release spherical agglomerates of polymethacrylates containing mefenamic acid: in vitro release, micromeritic properties and histological studies

Mefenamic acid (MA) spherical agglomerates (SAs) were prepared with various polymethacrylates having different permeability characteristics (Eudragit RS 100, Eudragit RL 100 and Eudragit L 100) and also with combination of Eudragit RS 100 and Eudragit L 100 in different ratios. SAs were prepared by spherical crystallization method using ethanol/dichloromethane solvent (crystallization) system. The influence of various formulation factors on the encapsulation efficiency, as in vitro drug release, and micromeritic properties was investigated. Target release profile of MA was also drawn. The yields of preparation and the encapsulation efficiencies were high for all formulations. The shape and surface characteristics of SAs were observed by a scanning electron microscope. The particle sizes are in the range of 0.219 ± 0.1 to 0.482 ± 0.25 mm (mean ± confidence interval t(95%)). In addition, histological studies showed that the administration of MA in SAs containing Eudragit RS/L provided a distinct tissue protection in the stomach and duodenum. Differential scanning calorimetry and X-ray diffraction of powder studies showed that MA particles crystallized in the presence of polymethacrylates did not undergo structural modifications.     

Eudragit microparticles as a possible tool for ophthalmic administration of acyclovir

This paper describes the production and characterization of polyacrylic polymer (Eudragit RL, RS and NE) microparticles by spray drying method. Microparticles were designed for ophthalmic administration of acyclovir. Microparticle morphology was characterized by optical and electron microscopy. The release kinetics of the drug from microspheres were determined by a dialysis method. The spray drying method described allows the production of microparticles with acceptable encapsulation efficiency and appropriate dimensional characteristics for ophthalmic administration. Release profile data indicate that acyclovir is released from microparticles in a controlled manner. In addition the release pattern of the drug is influenced by the type of Eudragit used for microparticle production. Moreover the plaque reduction efficiency of acyclovir containing microparticles (except for RS/NE microspheres) is comparable to that displayed by the free drug. Finally our results suggest that acyclovir containing microparticles could represent an interesting system for the release of this antiviral drug at the eye site.     

Catechin-loaded Eudragit microparticles for the management of diabetes: formulation,characterization and in vivo evaluation of antidiabetic efficacy

Catechin (CT) is natural molecule proved for antidiabetic activity. Clinical application of CT is highly restricted because of its low bioavailability and ineffectiveness in in vivo conditions. Therefore, the main objective of the present investigation was to formulate CT-loaded Eudragit RS 100 microparticles and evaluated for its potential against diabetes. CT microparticles showing highest entrapment efficiency of 92.3?±?6.5% and higher percentage yield of 63.46?±?4.3% was selected as optimised formulation. CT microparticles treated rats showed significantly lower blood glucose, cholesterol, LDL, free fatty acid and triglyceride concentrations in comparison to pristine CT-treated rats. The glucose and lipid profiles of microparticle formulation were akin to normal rats. Moreover, CT microparticles did not produce obesity even after 60 days which is a comment side effect of antidiabetic drugs. These results indicate that the CT microparticles can be applied as potential and safe carrier for the treatment of diabetes.     

In vitro and In vivo characterization of the transdermal delivery of sertraline hydrochloride Films

Background and the purpose of the study

Sertraline hydrochloride is a selective serotonin reuptake inhibitor principally used in the treatment of major depressive disorder. To maintain the therapeutic plasma drug concentration of the drug for prolonged period, the transdermal drug delivery has been chosen as an alternative route of drug delivery. The pharmacokinetic properties of sertraline hydrochloride make it suitable for transdermal delivery. The purpose of the study was to investigate the effect of polymers and penetration enhancers on the transdermal delivery of the drug in order to improve its therapeutic efficacy.

Methods

In the preparation of films, Eudragit RL 100, Eudragit RS 100, hydroxy propyl methyl cellulose (HPMC) and ethyl cellulose were used as polymers. The films were characterized for thickness, tensile strength, drug content, moisture uptake, moisture content, water vapor transmission rate and drug release. The films exhibiting higher rates of drug release were subjected to study the effect of oleic acid and propylene glycol as penetration enhancers on skin permeation of sertraline hydrochloride. In vivo and skin irritation studies were performed for the optimized film.

Results

Films containing Eudragit RL 100, Eudragit RL 100 and HPMC showed the highest drug release of 94.34% and 96.90% respectively in a period of 42 hrs. The release data fitted into kinetic equations, yielded zero-order and fickian mechanism of drug release. There was a two-fold increase in skin permeation of sertraline hydrochloride in the presence of penetration enhancers in the film. The physical evaluation indicated the formation of smooth, flexible and translucent films. No skin irritation occurred on rabbit skin and the infrared studies showed the compatibility of the drug with the formulation excipients. The in vivo study revealed a constant plasma concentration of drug for long periods and the films containing penetration enhancers had achieved adequate plasma levels of the drug.

Conclusions

The obtained results indicated the feasibility for transdermal delivery of sertraline hydrochloride using eudragit RL 100 and HPMC.     

Dissolution stability studies of suspensions of prolonged-release diclofenac microcapsules prepared by the Wurster process: I. Eudragit-based formulation and possible drug-excipient interaction

The aim was to evaluate possible interaction in solid and liquid state of the drug with formulation excipients consequent to very fast drug release of diclofenac-Eudragit® prolonged release microcapsules. The microcapsules were prepared by drug layering on calcium carbonate cores and coated with Eudragit® RS 30D and L30D-55 as previously reported. Suspension of the microcapsules was prepared using microcrystalline cellulose/sodium carboxymethyl cellulose (Avicel® CL-611) as medium. In vitro dissolution testing of the suspension was done, and, based on the dissolution results, possible interaction between diclofenac and Eudragit and Avicel in the medium was studied. Powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC) analyses were performed using 1:1 binary, 1:1:1 ternary mixtures and a ratio equivalent to that in the formulation. The mixtures were prepared by mixing the dispersions—Eudragit RS 30D or L30D-55 with the drug or other components, followed by drying at 60°C for 48?h. Dry mixing was done using the powder equivalents of the polymers, Eudragit RS PO and L100-55, Avicel and calcium carbonate. In vitro dissolution of the suspended microcapsules showed a very fast release after 48?h (T₅₀?=?<1?h) compared to the solid microcapsules (T₅₀?=?6?h). DSC curves of the formulation components or microcapsules did not show the characteristic endothermic peak of diclofenac at 287°C. Powder X-ray diffraction of the binary or ternary mixtures of diclofenac and Eudragit polymers indicated reduction, shift or modification of the crystalline peaks of the drug or excipients at 2θ of 12° and 18°, suggestive of interaction. Some changes in drug peak characteristics at 18° and 23° were observed for Avicel/drug mixture, though not significant. The DSC curves of the binary mixture of diclofenac co-dried with liquid forms of Eudragit (i.e. RS 30D or L30D-55) revealed greater interaction compared to the curves of drug and powdered forms of Eudragit (RS PO or L100-55). This was depicted by greater shift in fusion points of the mixtures relative to the drug. However, comparing the RS and L-type Eudragit, the latter generally showed greater interaction with the drug. Interaction between diclofenac and L-type Eudragit polymers can occur in liquid formulations.     

Effect of formulation variables on in vitro drug release and micromeritic properties of modified release ibuprofen microspheres

Modified release microspheres of the non-steroidal anti-inflammatory drug, ibuprofen, were formulated and prepared using the emulsion solvent diffusion technique. The contribution of various dispersed phase and continuous phase formulation factors on in vitro drug release and micromeritic characteristics of microspheres was examined. The results demonstrated that the use of Eudragit RS 100 and Eudragit RL 100 as embedding polymers modified the drug release properties as a function of polymer type and concentration. Eudragit RS 100 retarded ibuprofen release from the microspheres to a greater extent than Eudragit RL 100. The drug/polymer concentration of the dispersed phase influenced the particle size and drug release properties of the formed microspheres. It was found that the presence of emulsifier was essential for microsphere formation. Increasing the concentration of emulsifier, sucrose fatty acid ester F-70, decreased the particle size which contributed to increased drug release properties. Scanning electron microscopy revealed profound distortion in both the shape and surface morphology of the microspheres with the use of magnesium stearate as added emulsifier. The application of an additional Eudragit RS 100 coat onto formed microspheres using fluid bed technology was successful and modulated the drug release properties of the coated microspheres.     

Anticoagulant activity of heparin following oral administration of heparin-loaded microparticles in rabbits

Heparin-loaded microparticles, prepared according to the double emulsion method with biodegradable (PCL and PLGA) and nonbiodegradable (Eudragit RS and RL) polymers used alone or in combination, with or without gelatin, were characterized in vitro and in vivo after oral administration in rabbits. The entrapment efficiency and the release of heparin were determined by a colorimetric method with Azure II. The antifactor Xa activity of heparin released in vitro after 24 h was assessed. After oral administration of heparin-loaded microparticles in rabbits, the time course of modification of the clotting time estimated by the activated partial thromboplastin time (APTT) was followed over 24 h. Microparticles with a size ranging from 80 to 280 microm were obtained. Heparin entrapment efficiency as well as heparin release depended on both the nature of the polymers and the presence of gelatin. The Eudragit polymers increased the drug loading but slowed down the heparin release, whereas gelatin accelerated the release. No change in clotting time was observed after oral administration of gelatin microparticles. Heparin-loaded microparticles prepared with blends of PLGA and Eudragit displayed a prolonged duration of action characterized by a twofold increase in APTT and a enhancement of absorption. This study demonstrated the feasibility of encapsulating heparin within polymeric particles, and the significant increase in APTT confirmed the oral absorption of heparin released from polymeric microparticles.