Insights into the P-to-Q conversion in the catalytic cycle of methane monooxygenase from a synthetic model system

For the catalytic cycle of soluble methane monooxygenase (sMMO), it has been proposed that cleavage of the O–O bond in the (μ-peroxo)diiron(III) intermediate P gives rise to the diiron(IV) intermediate Q with an Fe₂(μ–O)₂ diamond core, which oxidizes methane to methanol. As a model for this conversion, (μ–oxo) diiron(III) complex 1 ([Fe^III₂(μ–O)(μ–O₂H₃)(L)₂]³⁺, L = tris(3,5-dimethyl-4-methoxypyridyl-2-methyl)amine) has been treated consecutively with one eq of H₂O₂ and one eq of HClO₄ to form 3 ([Fe^IV₂(μ–O)₂(L)₂]⁴⁺). In the course of this reaction a new species, 2, can be observed before the protonation step; 2 gives rise to a cationic peak cluster by ESI-MS at m/z 1,399, corresponding to the {[Fe₂O₃L₂H](OTf)₂}⁺ ion in which 1 oxygen atom derives from 1 and the other two originate from H₂O₂. Mössbauer studies of 2 reveal the presence of two distinct, exchange coupled iron(IV) centers, and EXAFS fits indicate a short Fe–O bond at 1.66 Å and an Fe–Fe distance of 3.32 Å. Taken together, the spectroscopic data point to an HO-Fe^IV-O-Fe^IV = O core for 2. Protonation of 2 results in the loss of H₂O and the formation of 3. Isotope labeling experiments show that the [Fe^IV₂(μ–O)₂] core of 3 can incorporate both oxygen atoms from H₂O₂. The reactions described here serve as the only biomimetic precedent for the conversion of intermediates P to Q in the sMMO reaction cycle and shed light on how a peroxodiiron(III) unit can transform into an [Fe^IV₂(μ–O)₂] core.     

Ag2O versus Cu2O in the Catalytic Isomerization of Coordinated Diaminocarbenes to Formamidines: A Theoretical Study

DFT theoretical calculations for the Ag₂O-induced isomerization process of diaminocarbenes to formamidines, coordinated to Mn(I), have been carried out. The reaction mechanism found involves metalation of an N-H residue of the carbene ligand by the catalyst Ag₂O and the formation of a key transition state showing a μ-η²:η² coordination of the formamidinyl ligand between manganese and silver, which allows a translocation process of Mn(I) and silver(I) ions between the carbene carbon atom and the nitrogen atom, before the formation of the formamidine ligand is completed. Calculations carried out using Cu₂O as a catalyst instead of Ag₂O show a similar reaction mechanism that is thermodynamically possible, but highly unfavorable kinetically and very unlikely to be observed, which fully agrees with experimental results.     

Nonlinear Optical Properties of Porphyrin,Fullerene and Ferrocene Hybrid Materials

In this research, we investigated the second-order nonlinear optical (NLO) properties of multicomponent hybrid materials formed by meso-tetraphenylporphyrin P (both as free base and Zn^II complex), carrying in 2 or 2,12 β-pyrrolic position an electron donor ferrocene (Fc), and/or an electron acceptor fullerene (C60) moiety, connected to the porphyrin core via an ethynyl or an ethynylphenyl spacer. We measured the NLO response by the electric-field-induced second-harmonic generation (EFISH) technique in CH₂Cl₂ solution with a 1907 nm incident wavelength, recording for all the investigated compounds unexpected negative values of μβ₁₉₀₇. Since density functional theory (DFT) calculations evidenced for P-Fc dyads almost null ground state dipole moments and very low values for P-C60 dyads and Fc-P-C60 triads, our EFISH results suggested a significant contribution to γ_EFISH of the purely electronic cubic term γ(−2ω; ω, ω, 0), which prevails on the quadratic dipolar orientational one μβ(−2ω; ω, ω)/5kT, as confirmed by computational evidence.     

Oscillatory Behaviour of Ni Supported on ZrO2 in the Catalytic Partial Oxidation of Methane as Determined by Activation Procedure

Ni/ZrO₂ catalysts, active and selective for the catalytic partial oxidation of methane to syngas (CH₄-CPO), were prepared by the dry impregnation of zirconium oxyhydroxide (Z_hy) or monoclinic ZrO₂ (Z_m), calcination at 1173 K and activation by different procedures: oxidation-reduction (ox-red) or direct reduction (red). The characterization included XRD, FESEM, in situ FTIR and Raman spectroscopies, TPR, and specific surface area measurements. Catalytic activity experiments were carried out in a flow apparatus with a mixture of CH₄:O₂ = 2:1 in a short contact time. Compared to Z_m, Z_hy favoured the formation of smaller NiO particles, implying a higher number of Ni sites strongly interacting with the support. In all the activated Ni/ZrO₂ catalysts, the Ni–ZrO₂ interaction was strong enough to limit Ni aggregation during the catalytic runs. The catalytic activity depended on the activation procedures; the ox-red treatment yielded very active and stable catalysts, whereas the red treatment yielded catalysts with oscillating activity, ascribed to the formation of Ni^δ+ carbide-like species. The results suggested that Ni dispersion was not the main factor affecting the activity, and that active sites for CH₄-CPO could be Ni species at the boundary of the metal particles in a specific configuration and nuclearity.     

Molecular dynamics study displays near in-line attack conformations in the hammerhead ribozyme self-cleavage reaction

We have performed molecular dynamics (MD) calculations by using one of the recently solved crystal structures of a hammerhead ribozyme. By rotating the α, β, γ, δ, , and ζ torsion angles of the phosphate linkage of residue 17, the nucleobase at the cleavage site was slightly rotated out of the active site toward the solution. Unconstrained MD simulations exceeding 1 ns were performed on this starting structure solvated in water with explicit counter ions and two Mg²⁺ ions at the active site. Our results reveal that near attack conformations consistently were formed in the simulation. These near attack conformations are characterized by assumption of the 2′-hydroxyl to a near in-line position for attack on the -O-(PO₂⁻)-O- phosphorous. Also during the time course of the MD study, one Mg²⁺ moved immediately to associate with a pro-R phosphate oxygen in the conserved core region, and the second Mg²⁺ remained associated with the pro-R oxygen on the phosphate linkage undergoing hydrolysis. These results are in accord with a one-metal ion mechanism of catalysis and give insight into the possible roles of many of the conserved residues in the ribozyme.     

A synthetic precedent for the [FeIV2(mu-O)2] diamond core proposed for methane monooxygenase intermediate Q

Intermediate Q, the methane-oxidizing species of soluble methane monooxygenase, is proposed to have an [Fe^IV₂(μ-O)₂] diamond core. In an effort to obtain a synthetic precedent for such a core, bulk electrolysis at 900 mV (versus Fc^+/0) has been performed in MeCN at −40°C on a valence-delocalized [Fe^IIIFe^IV(μ-O)₂(L^b)₂]³⁺ complex (1b) (E_1/2 = 760 mV versus Fc^+/0). Oxidation of 1b results in the near-quantitative formation of a deep red complex, designated 2b, that exhibits a visible spectrum with λ_max at 485 nm (9,800 M⁻¹·cm⁻¹) and 875 nm (2,200 M⁻¹·cm⁻¹). The 4.2 K Mössbauer spectrum of 2b exhibits a quadrupole doublet with δ = −0.04(1) mm·s⁻¹ and ΔE_Q = 2.09(2) mm·s⁻¹, parameters typical of an iron(IV) center. The Mössbauer patterns observed in strong applied fields show that 2b is an antiferromagnetically coupled diiron(IV) center. Resonance Raman studies reveal the diagnostic vibration mode of the [Fe₂(μ-O)₂] core at 674 cm⁻¹, downshifting 30 cm⁻¹ upon ¹⁸O labeling. Extended x-ray absorption fine structure (EXAFS) analysis shows two O/N scatterers at 1.78 Å and an Fe scatterer at 2.73 Å. Based on the accumulated spectroscopic evidence, 2b thus can be formulated as [Fe^IV₂(μ-O)₂(L^b)₂]⁴⁺, the first synthetic complex with an [Fe^IV₂(μ-O)₂] core. A comparison of 2b and its mononuclear analog [Fe^IV(O)(L^b)(NCMe)]²⁺ (4b) reveals that 4b is 100-fold more reactive than 2b in oxidizing weak CH bonds. This surprising observation may shed further light on how intermediate Q carries out the hydroxylation of methane.     

Vibrational analysis of peptides, polypeptides, and proteins: Characteristic amide bands of beta-turns

Normal vibration calculations have been done for a type I β-turn of CH₃-CO-(Ala)₄-NH-CH₃ and a type II β-turn of CH₃-CO-(Ala)₂-Gly-Ala-NH-CH₃. The force field was the one we refined for β-sheet and α-helical structures. A calculation was also done for CH₃-O-CO-Gly-(Ala)₂-Gly-O-CH₃, which is an appropriate model for two tetrapeptides for which infrared data are available. The agreement between observed and calculated frequencies in this case is good, thus supporting the conclusions drawn from the above β-turn calculations. The most important result of the calculations is the prediction of bands near 1690 cm^-1, a region heretofore associated only with the antiparallel-chain pleated sheet structure. This means that bands observed in proteins near 1690 cm^-1 should be associated with the presence of β-turns as well as of β-sheets. We also find that a band near 1665 cm^-1 is characteristic of type II turns.     

One-Pot Self-Assembly of Dinuclear,Tetranuclear, and H-Bonding-Directed Polynuclear Cobalt(II), Cobalt(III), and Mixed-Valence Co(II)/Co(III) Complexes of Schiff Base Ligands with Incomplete Double Cubane Core

The reaction of 2,6-diformyl-4-methylphenol (DFMF) with 1-amino-2-propanol (AP) and tris(hydroxymethyl)aminomethane (THMAM) was investigated in the presence of Cobalt(II) salts, (X = ClO₄⁻, CH₃CO₂⁻, Cl⁻, NO₃⁻), sodium azide (NaN₃), and triethylamine (TEA). In one pot, the variation in Cobalt(II) salt results in the self-assembly of dinuclear, tetranuclear, and H-bonding-directed polynuclear coordination complexes of Cobalt(III), Cobalt(II), and mixed-valence Co^IICo^III: [Co₂^III(H₂L⁻¹)₂(AP⁻¹)(N₃)](ClO₄)₂ (1), [Co₄(H₂L⁻¹)₂(µ₃-1,1,1-N₃)₂(µ-1,1-N₃)₂Cl₂(CH₃OH)₂]·4CH₃OH (2), [Co₂^IICo₂^III(HL⁻²)₂(µ-CH₃CO₂)₂(µ₃-OH)₂](NO₃)₂·2CH₃CH₂OH (3), and [Co₂^IICo₂^III (H₂L1²⁻)₂(THMAM⁻¹)₂](NO₃)₄ (4). In 1, two cobalt(III) ions are connected via three single atom bridges; two from deprotonated ethanolic oxygen atoms in the side arms of the ligands and one from the1-amino-2-propanol moiety forming a dinuclear unit with a very short (2.5430(11) Å) Co-Co intermetallic separation with a coordination number of 7, a rare feature for cobalt(III). In 2, two cobalt(II) ions in a dinuclear unit are bridged through phenoxide O and μ₃-1,1,1-N₃ azido bridges, and the two dinuclear units are interconnected by two μ-1,1-N₃ and two μ₃-1,1,1-N₃ azido bridges generating tetranuclear cationic [Co₄(H₂L⁻¹)₂(µ₃-1,1,1-N₃)₂(µ-1,1-N₃)₂Cl₂(CH₃OH)₂]²⁺ units with an incomplete double cubane core, which grow into polynuclear 1D-single chains along the a-axis through H-bonding. In 3, HL²⁻ holds mixed-valent Co(II)/Co(III) ions in a dinuclear unit bridged via phenoxide O, μ-1,3-CH₃CO₂⁻, and μ₃-OH⁻ bridges, and the dinuclear units are interconnected through two deprotonated ethanolic O in the side arms of the ligands and two μ₃-OH⁻ bridges generating cationic tetranuclear [Co₂^IICo₂^III(HL⁻²)₂(µ-CH₃CO₂)₂(µ_3-OH)₂]²⁺ units with an incomplete double cubane core. In 4, H₂L1⁻² holds mixed-valent Co(II)/Co(III) ions in dinuclear units which dimerize through two ethanolic O (μ-RO⁻) in the side arms of the ligands and two ethanolic O (μ₃-RO⁻) of THMAM bridges producing centrosymmetric cationic tetranuclear [Co₂^IICo₂^III (H₂L1⁻²)₂(THMAM⁻¹)₂]⁴⁺ units which grow into 2D-sheets along the bc-axis through a network of H-bonding. Bulk magnetization measurements on 2 demonstrate that the magnetic interactions are completely dominated by an overall ferromagnetic coupling occurring between Co(II) ions.     

Ammonia binding to the oxygen-evolving complex of photosystem II identifies the solvent-exchangeable oxygen bridge (μ-oxo) of the manganese tetramer

The assignment of the two substrate water sites of the tetra-manganese penta-oxygen calcium (Mn₄O₅Ca) cluster of photosystem II is essential for the elucidation of the mechanism of biological O-O bond formation and the subsequent design of bio-inspired water-splitting catalysts. We recently demonstrated using pulsed EPR spectroscopy that one of the five oxygen bridges (μ-oxo) exchanges unusually rapidly with bulk water and is thus a likely candidate for one of the substrates. Ammonia, a water analog, was previously shown to bind to the Mn₄O₅Ca cluster, potentially displacing a water/substrate ligand [Britt RD, et al. (1989) J Am Chem Soc 111(10):3522–3532]. Here we show by a combination of EPR and time-resolved membrane inlet mass spectrometry that the binding of ammonia perturbs the exchangeable μ-oxo bridge without drastically altering the binding/exchange kinetics of the two substrates. In combination with broken-symmetry density functional theory, our results show that (i) the exchangable μ-oxo bridge is O5 {using the labeling of the current crystal structure [Umena Y, et al. (2011) Nature 473(7345):55–60]}; (ii) ammonia displaces a water ligand to the outer manganese (Mn_A4-W1); and (iii) as W1 is trans to O5, ammonia binding elongates the Mn_A4-O5 bond, leading to the perturbation of the μ-oxo bridge resonance and to a small change in the water exchange rates. These experimental results support O-O bond formation between O5 and possibly an oxyl radical as proposed by Siegbahn and exclude W1 as the second substrate water.     

A model for the CO-inhibited form of [NiFe] hydrogenase: synthesis of (CO)3Fe(μ-StBu)3Ni{SC6H3-2,6-(mesityl)2} and reversible CO addition at the Ni site

A [NiFe] hydrogenase model compound having a distorted trigonal-pyramidal nickel center, (CO)₃Fe(μ-S^tBu)₃Ni(SDmp), 1 (Dmp = C₆H₃-2,6-(mesityl)₂), was synthesized from the reaction of the tetranuclear Fe-Ni-Ni-Fe complex [(CO)₃Fe(μ-S^tBu)₃Ni]₂(μ-Br)₂, 2 with NaSDmp at -40 °C. The nickel site of complex 1 was found to add CO or CN^tBu at -40 °C to give (CO)₃Fe(S^tBu)(μ-S^tBu)₂Ni(CO)(SDmp), 3, or (CO)₃Fe(S^tBu)(μ-S^tBu)₂Ni(CN^tBu)(SDmp), 4, respectively. One of the CO bands of 3, appearing at 2055 cm^-1 in the infrared spectrum, was assigned as the Ni-CO band, and this frequency is comparable to those observed for the CO-inhibited forms of [NiFe] hydrogenase. Like the CO-inhibited forms of [NiFe] hydrogenase, the coordination of CO at the nickel site of 1 is reversible, while the CN^tBu adduct 4 is more robust.     

Transformation of Tri-Titanium(IV)-Substituted α-Keggin Polyoxometalate (POM) into Tetra-Titanium(IV)-Substituted POMs : Reaction Products of Titanium(IV) Sulfate with the Dimeric Keggin POM Precursor under Acidic Conditions

Reaction products of titanium(IV) sulfate in HCl-acidic aqueous solution with the dimeric species linked through three intermolecular Ti-O-Ti bonds of the two tri-titanium(IV)-substituted α-Keggin polyoxometalate (POM) subunits are described. Two novel titanium(IV)-containing α-Keggin POMs were obtained under different conditions. One product was a dimeric species through two intermolecular Ti-O-Ti bonds of the two tetra-titanium(IV)-substituted α-Keggin POM subunits, i.e., [[{Ti(H₂O)₃}₂(μ-O)](α-PW₉Ti₂O₃₈)]₂^6- (1). The other product was a monomeric α-Keggin species containing the tetra-titanium(IV) oxide cluster and two coordinated sulfate ions, i.e., [{Ti₄(μ-O)₃(SO₄)₂(H₂O)₈}(α-PW₉O₃₄)]^3- (2). Molecular structures of 1 and 2 were also discussed based on host (lacunary site)-guest (titanium atom) chemistry.     

Modifier Effect in Silica-Supported FePO4 and Fe-Mo-O Catalysts for Propylene Glycol Oxidation

Currently, catalytic processing of biorenewable raw materials into valuable products attracts more and more attention. In the present work, silica-supported FePO₄ and Fe-Mo-O catalysts are prepared, their phase composition, and catalytic properties are studied in the process of selective oxidation of propylene glycol into valuable mono- and bicarbonyl compounds, namely, hydroxyacetone and methylglyoxal. A comparative analysis of the main routes of propylene glycol adsorption with its subsequent oxidative conversion into carbonyl products is carried out. The DFT calculations show that in the presence of adsorbed oxygen atom, the introduction of the phosphate moiety to the Fe-containing site strengthens the alcohol adsorption on the catalyst surface with the formation of the 1,2-propanedioxy (–OCH(CH₃)CH₂O–) intermediate at the active site. The introduction of the molybdenum moiety to the Fe-containing site in the presence of the adsorbed oxygen atom is also energetically favorable, however, the interaction energy is found by 100 kJ/mol higher compared to the case with phosphate moiety that leads to an increase in the propylene glycol conversion while maintaining high selectivity towards C₃ products. The catalytic properties of the synthesized iron-containing catalysts are experimentally compared with those of Ag/SiO₂ sample. The synthesized FePO₄/SiO₂ and Fe-Mo-O/SiO₂ catalysts are not inferior to the silver-containing catalyst and provide ~70% selectivity towards C₃ products, while the main part of propylene glycol is converted into methylglyoxal in contrast to the Ag/SiO₂ catalyst featuring the selective transformation of only the secondary C-OH group in the substrate molecule under the studied conditions with the formation of hydroxyacetone. Thus, supported Fe-Mo-O/SiO₂ catalysts are promising for the selective oxidation of polyatomic alcohols under low-temperature conditions.     

A First-Principles Study of the Cu-Containing β″ Precipitates in Al-Mg-Si-Cu Alloy

The nanostructured β″ precipitates are critical for the strength of Al-Mg-Si-(Cu) aluminum alloys. However, there are still controversial reports about the composition of Cu-containing β″ phases. In this work, first-principles calculations based on density functional theory were used to investigate the composition, mechanical properties, and electronic structure of Cu-containing β″ phases. The results predict that the Cu-containing β″ precipitates with a stoichiometry of Mg_4+xAl_2−xCuSi₄ (x = 0, 1) are energetically favorable. As the concentration of Cu atoms increases, Cu-containing β″ phases with different compositions will appear, such as Mg₄AlCu₂Si₄ and Mg₄Cu₃Si₄. The replacement order of Cu atoms in β″ phases can be summarized as one Si3/Al site → two Si3/Al sites → two Si3/Al sites and one Mg1 site. The calculated elastic constants of the considered β″ phases suggest that they are all mechanically stable, and all β″ phases are ductile. When Cu atoms replace Al atoms at Si3/Al sites in β″ phases, the values of bulk modulus (B), shear modulus (G), and Young’s modulus (E) all increase. The calculation of the phonon spectrum shows that Mg_4+xAl_2−xCuSi₄ (x = 0, 1) are also dynamically stable. The electronic structure analysis shows that the bond between the Si atom and the Cu atom has a covalent like property. The incorporation of the Cu atom enhances the electron interaction between the Mg2 and the Si3 atom so that the Mg2 atom also joins the Si network, which may be one of the reasons why Cu atoms increase the structure stability of the β″ phases.     

A FERM domain autoregulates Drosophila myosin 7a activity

Full-length Drosophila myosin 7a (myosin 7a-FL) has a complex tail containing a short predicted coiled coil followed by a MyTH4-FERM domain, an SH3 domain, and a C-terminal MyTH4-FERM domain. Myosin 7a-FL expressed in Sf9 cells is monomeric despite the predicted coiled coil. We showed previously that Subfragment-1 (S1) from this myosin has MgATPase of V_max ≈ 1s⁻¹ and K_ATPase ≈ 1 μM actin. We find that myosin 7a-FL has V_max similar to S1 but K_ATPase ≈ 30 μM. Thus, at low actin concentrations (5 μM), the MgATPase of S1 is fully activated, whereas that of myosin 7a-FL is low, suggesting that the tail regulates activity. Electron microscopy of myosin 7a-FL with ATP shows the tail is tightly bent back against the motor domain. Myosin 7a-FL extends at either high ionic strength or without ATP, revealing the motor domain, lever, and tail. A series of C-terminal truncations show that deletion of 99 aa (the MyTH7 subdomain of the C-terminal FERM domain) is sufficient to abolish bending, and the K_ATPase is then similar to S1. This region is highly conserved in myosin 7a. We found that a double mutation in it, R2140A-K2143A, abolishes bending and reduces K_ATPase to S1 levels. In addition, the expressed C-terminal FERM domain binds actin with K_d ≈ 30 μM regardless of ATP, similar to the K_ATPase value for myosin 7a-FL. We propose that at low cellular actin concentrations, myosin 7a-FL is bent and inactive, but at high actin concentrations, it is unfolded and active because the C-terminal FERM domain binds to actin.     

Ca2+-dependent and -independent interactions of the isoforms of the α1A subunit of brain Ca2+ channels with presynaptic SNARE proteins

Fast neurotransmission requires that docked synaptic vesicles be located near the presynaptic N-type or P/Q-type calcium channels. Specific protein–protein interactions between a synaptic protein interaction (synprint) site on N-type and P/Q-type channels and the presynaptic SNARE proteins syntaxin, SNAP-25, and synaptotagmin are required for efficient, synchronous neurotransmitter release. Interaction of the synprint site of N-type calcium channels with syntaxin and SNAP-25 has a biphasic calcium dependence with maximal binding at 10–20 μM. We report here that the synprint sites of the BI and rbA isoforms of the α_1A subunit of P/Q-type Ca²⁺ channels have different patterns of interactions with synaptic proteins. The BI isoform of α_1A specifically interacts with syntaxin, SNAP-25, and synaptotagmin independent of Ca²⁺ concentration and binds with high affinity to the C2B domain of synaptotagmin but not the C2A domain. The rbA isoform of α_1A interacts specifically with synaptotagmin and SNAP-25 but not with syntaxin. Binding of synaptotagmin to the rbA isoform of α_1A is Ca²⁺-dependent, with maximum affinity at 10–20 μM Ca²⁺. Although the rbA isoform of α_1A binds well to both the C2A and C2B domains of synaptotagmin, only the interaction with the C2A domain is Ca²⁺-dependent. These differential, Ca²⁺-dependent interactions of Ca²⁺ channel synprint sites with SNARE proteins may modulate the efficiency of transmitter release triggered by Ca²⁺ influx through these channels.     

Rapid Growth of Nanostructured Diamond Film on Silicon and Ti–6Al–4V Alloy Substrates

Nanostructured diamond (NSD) films were grown on silicon and Ti–6Al–4V alloy substrates by microwave plasma chemical vapor deposition (MPCVD). NSD Growth rates of 5 μm/h on silicon, and 4 μm/h on Ti–6Al–4V were achieved. In a chemistry of H₂/CH₄/N₂, varying ratios of CH₄/H₂ and N₂/CH₄ were employed in this research and their effect on the resulting diamond films were studied by X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and atomic force microscopy. As a result of modifying the stock cooling stage of CVD system, we were able to utilize plasma with high power densities in our NSD growth experiments, enabling us to achieve high growth rates. Substrate temperature and N₂/CH₄ ratio have been found to be key factors in determining the diamond film quality. NSD films grown as part of this study were shown to contain 85% to 90% sp³ bonded carbon.     

Enhancement of Bentonite Materials with Cement for Gamma-Ray Shielding Capability

The gamma-ray shielding ability of various Bentonite–Cement mixed materials from northeast Egypt have been examined by determining their theoretical and experimental mass attenuation coefficients, μ_m (cm²g⁻¹), at photon energies of 59.6, 121.78, 344.28, 661.66, 964.13, 1173.23, 1332.5 and 1408.01 keV emitted from ²⁴¹Am, ¹³⁷Cs, ¹⁵²Eu and ⁶⁰Co point sources. The μ_m was theoretically calculated using the chemical compositions obtained by Energy Dispersive X-ray Analysis (EDX), while a NaI (Tl) scintillation detector was used to experimentally determine the μ_m (cm²g⁻¹) of the mixed samples. The theoretical values are in acceptable agreement with the experimental calculations of the XCom software. The linear attenuation coefficient (μ), mean free path (MFP), half-value layer (HVL) and the exposure buildup factor (EBF) were also calculated by knowing the μ_m values of the examined samples. The gamma-radiation shielding ability of the selected Bentonite–Cement mixed samples have been studied against other puplished shielding materials. Knowledge of various factors such as thermo-chemical stability, availability and water holding capacity of the bentonite–cement mixed samples can be analyzed to determine the effectiveness of the materials to shield gamma rays.     

Phosphatidylinositol 4,5-bisphosphate (PIP2) stimulates the electrogenic Na/HCO3 cotransporter NBCe1-A expressed in Xenopus oocytes

Bicarbonate transporters are regulated by signaling molecules/ions such as protein kinases, ATP, and Ca²⁺. While phospholipids such as PIP₂ can stimulate Na-H exchanger activity, little is known about phospholipid regulation of bicarbonate transporters. We used the patch-clamp technique to study the function and regulation of heterologously expressed rat NBCe1-A in excised macropatches from Xenopus laevis oocytes. Exposing the cytosolic side of inside-out macropatches to a 5% CO₂/33 mM HCO₃⁻ solution elicited a mean inward current of 14 pA in 74% of macropatches attached to pipettes (−V_p = −60 mV) containing a low-Na⁺, nominally HCO₃⁻-free solution. The current was 80–90% smaller in the absence of Na⁺, approximately 75% smaller in the presence of 200 μM DIDS, and absent in macropatches from H₂O-injected oocytes. NBCe1-A currents exhibited time-dependent rundown that was inhibited by removing Mg²⁺ in the presence or absence of vanadate and F⁻ to reduce general phosphatase activity. Applying 5 or 10 μM PIP₂ (diC8) in the presence of HCO₃⁻ induced an inward current in 54% of macropatches from NBC-expressing, but not H₂O-injected oocytes. PIP₂-induced currents were HCO₃⁻-dependent and somewhat larger following more NBCe1-A rundown, 62% smaller in the absence of Na⁺, and 90% smaller in the presence of 200 μM DIDS. The polycation neomycin (250–500 μM) reduced the PIP₂-induced inward current by 69%; spermine (100 μM) reduced the current by 97%. Spermine, poly-D-lysine, and neomycin all reduced the baseline HCO₃⁻-induced inward currents by as much as 85%. In summary, PIP₂ stimulates NBCe1-A activity, and phosphoinositides are regulators of bicarbonate transporters.     

Synthesis,Crystal Structure and Luminescent Property of Cd (II) Complex with N-Benzenesulphonyl-L-leucine

A new trinuclear Cd (II) complex [Cd₃(L)₆(2,2-bipyridine)₃] [L = N-phenylsulfonyl-L-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group P2₁2₁2₁ with a = 16.877(3) Å, b = 22.875(5) Å, c = 29.495(6) Å, α = β = γ = 90°, V = 11387(4) ų, Z = 4, D_c= 1.416 μg·m⁻³, μ = 0.737 mm⁻¹, F (000) = 4992, and final R₁ = 0.0390, ωR₂ = 0.0989. The complex comprises two seven-coordinated Cd (II) atoms, with a N₂O₅ distorted pengonal bipyramidal coordination environment and a six-coordinated Cd (II) atom, with a N₂O₄ distorted octahedral coordination environment. The molecules form one dimensional chain structure by the interaction of bridged carboxylato groups, hydrogen bonds and π-π interaction of 2,2-bipyridine. The luminescent properties of the Cd (II) complex and N-Benzenesulphonyl-L-leucine in solid and in CH₃OH solution also have been investigated.