Environment-sensitive hydrogels for drug delivery.

Environmentally sensitive hydrogels have enormous potential in various applications. Some environmental variables, such as low pH and elevated temperatures, are found in the body. For this reason, either pH-sensitive and/or temperature-sensitive hydrogels can be used for site-specific controlled drug delivery. Hydrogels that are responsive to specific molecules, such as glucose or antigens, can be used as biosensors as well as drug delivery systems. Light-sensitive, pressure-responsive and electro-sensitive hydrogels also have the potential to be used in drug delivery and bioseparation. While the concepts of these environment-sensitive hydrogels are sound, the practical applications require significant improvements in the hydrogel properties. The most significant weakness of all these external stimuli-sensitive hydrogels is that their response time is too slow. Thus, fast-acting hydrogels are necessary, and the easiest way of achieving that goal is to make thinner and smaller hydrogels. This usually makes the hydrogel systems too fragile and they do not have mechanical strength necessary in many applications. Environmentally sensitive hydrogels for drug delivery applications also require biocompatibility. Synthesis of new polymers and crosslinkers with more biocompatibility and better biodegradability would be essential for successful applications. Development of environmentally sensitive hydrogels with such properties is a formidable challenge. If the achievements of the past can be extrapolated into the future, however, it is highly likely that responsive hydrogels with a wide array of desirable properties can be made.     

Thermosensitive hydrogels for drug delivery

INTRODUCTION: Controlled drug delivery has been widely applied in areas such as cancer therapy and tissue regeneration. Thermosensitive hydrogel-based drug delivery systems have increasingly attracted the attention of the drug delivery community, as the drugs can be readily encapsulated and released by the hydrogels. AREAS COVERED: Thermosensitive hydrogels that can serve as drug carriers are discussed in this paper. Strategies used to control hydrogel properties, in order to tailor drug release kinetics, are also reviewed. This paper also introduces applications of the thermosensitive hydrogel-based drug delivery systems in cancer therapy and tissue regeneration. EXPERT OPINION: When designing a drug delivery system using thermosensitive hydrogels, one needs to consider what type of thermosensitive hydrogel needs to be used, and how to manipulate its properties to meet the desired drug release kinetics. For material selection, both naturally derived and synthetic thermosensitive polymers can be used. Various methods can be used to tailor thermosensitive hydrogel properties in order to achieve the desired drug release profile.     

基于动态共价键的多糖水凝胶在药物递送及组织修复中的应用研究进展

水凝胶具有良好的生物相容性和生物降解性,广泛应用于药物递送、伤口敷料和组织工程等生物医学领域。按照材料来源可分为合成材料水凝胶和天然材料水凝胶,其中天然多糖水凝胶不仅可以作为材料应用,还具有独特的药理活性和较好的机械性能,逐渐成为首选材料。动态共价键水凝胶由于其结构灵活性、自愈合性能和环境响应性备受关注。本文对采用动态键方式的天然多糖水凝胶体系进行归类和总结,并对该类水凝胶在药物递送以及组织修复方面的研究现状进行概述,以期为新型多糖水凝胶的临床应用提供借鉴。     

In situ forming hydrogels based on chitosan for drug delivery and tissue regeneration

In situ forming hydrogels with simple sol–gel transition are more practicable as injectable hydrogels for drug delivery and tissue regeneration. State-of-the-art in situ gelling systems can easily and efficiently be formed by different mechanisms in situ. Chitosan is a kind of natural polysaccharide that is widely exploited for biomedical applications due to its good biocompatibility, low immunogenicity and specific biological activities. Chitosan-based in situ gelling systems have already gained much attention as smart biomaterials in the development of several biomedical applications, such as for drug delivery systems and regeneration medicine. Herein, we review the typical in situ gelling systems based on chitosan and mechanisms involved in hydrogel forming, and report advances of chitosan-based in situ gels for the applications in drug delivery and tissue regeneration. Finally, development prospects of in situ forming hydrogels based on chitosan are also discussed in brief.     

Thermosensitive hydrogels for drug delivery

Introduction: Controlled drug delivery has been widely applied in areas such as cancer therapy and tissue regeneration. Thermosensitive hydrogel-based drug delivery systems have increasingly attracted the attention of the drug delivery community, as the drugs can be readily encapsulated and released by the hydrogels.

Areas covered: Thermosensitive hydrogels that can serve as drug carriers are discussed in this paper. Strategies used to control hydrogel properties, in order to tailor drug release kinetics, are also reviewed. This paper also introduces applications of the thermosensitive hydrogel-based drug delivery systems in cancer therapy and tissue regeneration.

Expert opinion: When designing a drug delivery system using thermosensitive hydrogels, one needs to consider what type of thermosensitive hydrogel needs to be used, and how to manipulate its properties to meet the desired drug release kinetics. For material selection, both naturally derived and synthetic thermosensitive polymers can be used. Various methods can be used to tailor thermosensitive hydrogel properties in order to achieve the desired drug release profile.     

Chitosan-based hydrogels for controlled, localized drug delivery

Hydrogels are high-water content materials prepared from cross-linked polymers that are able to provide sustained, local delivery of a variety of therapeutic agents. Use of the natural polymer, chitosan, as the scaffold material in hydrogels has been highly pursued thanks to the polymer's biocompatibility, low toxicity, and biodegradability. The advanced development of chitosan hydrogels has led to new drug delivery systems that release their payloads under varying environmental stimuli. In addition, thermosensitive hydrogel variants have been developed to form a chitosan hydrogel in situ, precluding the need for surgical implantation. The development of these intelligent drug delivery devices requires a foundation in the chemical and physical characteristics of chitosan-based hydrogels, as well as the therapeutics to be delivered. In this review, we investigate the newest developments in chitosan hydrogel preparation and define the design parameters in the development of physically and chemically cross-linked hydrogels.     

Flow control with hydrogels

With the advent of the genomic revolution and the sequencing of the human genome complete, the majority of pharmaceuticals under development are proteins. Consequently, new techniques to more effectively administer these new protein therapeutics need to be developed. One method that is gaining popularity in the research community involves the use of responsive hydrogel actuators for flow control in drug delivery devices. Responsive hydrogels are materials able to undergo a volume change in response to a stimulus from their local environment. The following paper overviews recent advances made using hydrogel actuators for flow control such as resistance based valves, hydrogel jacket valves, hybrid hydrogel membrane valve, electrically triggered valves, and biomimetic valves. Also reviewed are several hydrogel flow control systems such as a flow sorter and pH-regulation system. The chemistry of the hydrogel actuators can be tweaked to allow physiological variables to trigger the volume expansion of the hydrogel actuators as demonstrated by several glucose sensitive hydrogel valves reviewed below. Therefore, the door to physiological feedback controlling the infusion rate in a drug delivery device is opened and has the potential to revolutionize protein pharmaceutical drug delivery.     

Methods of synthesis of hydrogels … A review

Hydrogels are being investigated recently for the bioactive molecules (in particular pharmaceutical proteins) controlled release, such as matrices, and for the living cells encapsulation. Biodegradable nature of hydrogels has created much interest for drug delivery systems. The original three-dimensional structure disintegrates into nontoxic substances to ascertain an excellent biocompatibility of the gel. Chemical cross-linking is the highly resourceful method for the formation of hydrogels having an excellent mechanical strength. Cross-linkers used in hydrogel preparation should be extracted from the hydrogels before use due to their reported toxicity. Physically cross-linked methods for preparation of hydrogel are the alternate solution of cross-linker toxicity.     

Structure and interactions in chitosan hydrogels formed by complexation or aggregation for biomedical applications.

The aim of this review was to provide a detailed overview of physical chitosan hydrogels and related networks formed by aggregation or complexation, which are intended for biomedical applications. The structural basis of these systems is discussed with particular emphasis on the network-forming interactions, the principles governing their formation and their physicochemical properties. An earlier review discussing crosslinked chitosan hydrogels highlighted the potential negative influence on biocompatibility of covalent crosslinkers and emphasised the need for alternative hydrogel systems. A possible means to avoid the use of covalent crosslinkers is to prepare physical chitosan hydrogels by direct interactions between polymeric chains, i.e. by complexation, e.g. polyelectrolyte complexes (PEC) and chitosan/poly (vinyl alcohol) (PVA) complexes, or by aggregation, e.g. grafted chitosan hydrogels. PEC exhibit a higher swelling sensitivity towards pH changes compared to covalently crosslinked chitosan hydrogels, which extends their potential application. Certain complexed polymers, such as glycosaminoglycans, can exhibit interesting intrinsic properties. Since PEC are formed by non-permanent networks, dissolution can occur. Chitosan/PVA complexes represent an interesting alternative for preparing biocompatible drug delivery systems if pH-controlled release is n/ot required. Grafted chitosan hydrogels are more complex to prepare and do not always improve biocompatibility compared to covalently crosslinked hydrogels, but can enhance certain intrinsic properties of chitosan such as bacteriostatic and wound-healing activity.     

一种pH敏感水凝胶的性质及用于胰岛素口服给药的研究

目的研究pH敏感水凝胶的性质及其用于胰岛素口服给药的降血糖作用。方法制备了聚(甲基丙烯酸 泊洛沙姆 )共聚物水凝胶 ;在不同pH值的介质中研究凝胶溶胀、药物扩散和药物释放性质 ;含胰岛素的凝胶经口服给予糖尿病大鼠。结果水凝胶具有 pH敏感的性质 ;糖尿病大鼠口服给予含胰岛素的聚合物后有明显的剂量依赖的降血糖作用。结论这种水凝胶有望用作药物传递的载体。     

A novel thermoresponsive hydrogel based on chitosan.

Injectable thermosetting chitosan hydrogels are attractive systems for drug delivery and tissue engineering that combine biodegradability, biocompatibility and the ability to form in situ gel-like implants. Thermally-induced gelation relies advantageously on biopolymer secondary interactions, avoiding potentially toxic polymerization reactions that may occur with in situ polymerizing formulations. In view of a biomedical use, such formulations have to be sterilizable and storable on extended periods without losing their thermosetting properties. These two key features have been studied in the present paper. Chitosans from two different sources were added with several phosphate-free polyols or polyoses as gelling agents. Despite a reduction in chitosan molecular weight following autoclaving, the hydrogels prepared with autoclaved chitosan showed the desired thermosetting properties. Hence, chitosan steam sterilization combined with aseptic preparation of the hydrogel allows a sterile formulation to be obtained. Whereas thermosetting hydrogels were shown to be unstable when refrigerated, freezing was shown to be conceivable as a storage method. When trehalose or mannitol was used as stabilizing agent, the formulation reconstituted from a lyophilizate displayed thermosetting properties and was still injectable, paving the way to the development of a clinically utilizable, novel chitosan thermosetting hydrogel.     

Auto-associative amphiphilic polysaccharides as drug delivery systems

Self-assembly of amphiphilic polysaccharides provides a positive outlook for drug delivery systems without the need for solvents or surfactants. Various polymeric amphiphilic polysaccharides undergo intramolecular or intermolecular associations in water. This type of association, promoted by hydrophobic segments, led to the formation of various drug delivery systems such as micelles, nanoparticles, liposomes and hydrogels. Here, we review a selection of the most important amphiphilic polysaccharides used as drug delivery systems and their pharmaceutical applications. Attention focuses on amphiphilic chitosan owing to its unique properties such as excellent biocompatibility, non-toxicity and antimicrobial and bioadhesive properties.     

Drug delivery applications for superporous hydrogels

INTRODUCTION: Considerable advances have been made to hydrogels with the development of faster swelling superporous hydrogels (SPHs). These new-generation hydrogels have large numbers of interconnected pores, giving them the capacity to absorb large amounts of water at an accelerated rate. This gives SPHs the ability to be used in a variety of novel drug delivery applications, such as gastric retention and peroral intestinal delivery of proteins and peptides. AREAS COVERED: This review focuses on the applications of SPHs for drug transport and targeted drug therapies, as well as the characteristics and historical advancements made to SPH synthesis as it pertains to drug delivery. Manufacturing considerations and challenges that must be overcome are also discussed, such as scale-up, biocompatibility and safety. EXPERT OPINION: Modern SPHs have high swelling and high mechanical strength making them suitable for many diverse pharmaceutical and biomedical applications. However, demonstrative preclinical animal studies still need to be confirmed in human trials, to further address safety issues and confirm therapeutic success when using SPHs as platforms for drug delivery. The focus of forthcoming applications of SPHs is likely to be in the area of oral site-specific delivery and regenerative medicine.     

Intelligent hydrogels for drug delivery system

Intelligent hydrogel, also known as smart hydrogels, are materials with great potential for development in drug delivery system. Intelligent hydrogel also has the ability to perceive as a signal structure change and stimulation. The review introduces the temperature-, pH-, electric signal-, biochemical molecule-, light- and pressure- sensitive hydrogels. Finally, we described the application of intelligent hydrogel in drug delivery system and the recent patents involved for hydrogel in drug delivery.     

Photoresponsive hydrogels for biomedical applications

Hydrogels are soft materials composed of a three-dimensional network which contain a high percentage of water similar to body tissue and are therefore regarded as a biocompatible material. Hydrogels have various potential applications in the biomedical field such as drug delivery and as scaffold for tissue engineering. Control over the physical properties of a hydrogel by an external stimulus is highly desirable and is therefore actively studied. Light is a particularly interesting stimulus to manipulate the properties of a hydrogel as it is a remote stimulus that can be controlled spatially and temporally with great ease and convenience. Therefore in recent years photoresponsive hydrogels have been investigated as an emerging biomaterial. Here we will review recent developments and discuss these new materials, and their applications in the biomedical field.     

Cytotoxicity and biocompatibility evaluation of a poly(magnesium acrylate) hydrogel synthesized for drug delivery

We report the synthesis and characterization as well as cytotoxicity and biocompatibility studies of a poly(magnesium acrylate) hydrogel (PAMgA) developed for drug delivery applications. Two hydrogels with different mesh sizes, large and short, were synthesized (L-C PAMgA and S-C PAMgA). The hydrogels were characterized through swelling, FT-IR and DSC. Cytotoxicity in vitro was evaluated on cell line NIH-3T3 fibroblasts via direct contact and two indirect contact methods (MTT and flow citometry). Both PAMgA hydrogels exhibited low cytotoxicity with survival rates higher than 90%. To select their administration route, biocompatibility was evaluated after intraperitoneal, subcutaneous, and oral administration to mice of both hydrogels at different dose ranges. Swelling percentages obtained were 33.3 ± 4.2% and 166.7 ± 8.3% for L-C PAMgA and S-C PAMgA respectively, showing a great difference in both hydrogels. Among the administration routes assayed, the hydrogels were well tolerated after oral administration of a wide dose range (10-500 mg/kg), thereby indicating that both PAMgA hydrogels are excellent candidates for oral administration due to their in vitro biocompatibility and oral non-toxicity. These results together with the fact that their synthesis is simple and inexpensive make them good candidates for the design of oral drug delivery devices.     

Hydrogels in controlled release formulations: network design and mathematical modeling

Over the past few decades, advances in hydrogel technologies have spurred development in many biomedical applications including controlled drug delivery. Many novel hydrogel-based delivery matrices have been designed and fabricated to fulfill the ever-increasing needs of the pharmaceutical and medical fields. Mathematical modeling plays an important role in facilitating hydrogel network design by identifying key parameters and molecule release mechanisms. The objective of this article is to review the fundamentals and recent advances in hydrogel network design as well as mathematical modeling approaches related to controlled molecule release from hydrogels. In the first section, the niche roles of hydrogels in controlled release, molecule release mechanisms, and hydrogel design criteria for controlled release applications are discussed. Novel hydrogel systems for drug delivery including biodegradable, smart, and biomimetic hydrogels are reviewed in the second section. Several mechanisms have been elucidated to describe molecule release from polymer hydrogel systems including diffusion, swelling, and chemically-controlled release. The focus of the final part of this article is discussion of emerging hydrogel delivery systems and challenges associated with modeling the performance of these devices.     

Preparation and characterization of superporous hydrogels as gastroretentive drug delivery system for rosiglitazone maleate

BACKGROUND AND THE PURPOSE OF THE STUDY: Many drugs which have narrow therapeutic window and are absorbed mainly in stomach have been developed as gastroretentive delivery system. Rosiglitazone maleate, an anti-diabetic, is highly unstable at basic pH and is extensively absorbed from the stomach. Hence there is a need to develop a gastroretentive system. In this study a superporous hydrogel was developed as a gastroretentive drug delivery system. METHODS: Chitosan/poly(vinyl alcohol) interpenetrating polymer network type superporous hydrogels were prepared using a gas foaming method employing glyoxal as the crosslinking agent for Rosiglitazone maleate. Sodium bicarbonate was applied as a foaming agent to introduce the porous structure. Swelling behaviors of superporous hydrogel in acidic solution were studied to investigate their applications for gastric retention device. The optimum preparation condition of superporous hydrogels was obtained from the gelation kinetics. FT-IR, scanning electron microscopy, porosity and swelling ratio studies were used to characterize these polymers. In vitro drug release studies were also carried out. RESULTS: The introduction of a small amount of Poly(Vinyl Alcohol) enhanced the mechanical strength but slightly reduced the swelling ratio. The prepared superporous hydrogels were highly sensitive to pH of swelling media, and showed reversible swelling and de-swelling behaviors maintaining their mechanical stability. The degradation kinetics in simulated gastric fluid showed that it had biodegradability. Swelling was dependent on the amount of chitosan and crosslinker. The drug release from superporous hydrogels was sustained for 6 hrs. MAJOR CONCLUSION: The studies showed that chitosan-based superporous hydrogels could be used as a gastroretentive drug delivery system for rosiglitazone maleate in view of their swelling and prolonged drug release characteristics in acidic pH.     

Hydrogels: Swelling,Drug Loading,and Release

Hydrogels have been used by many investigators in controlled-release drug delivery systems because of their good tissue compatibility and easy manipulation of swelling level and, thereby, solute permeability. The desired kinetics, duration, and rate of solute release from hydrogels are limited to specific conditions, such as hydrogel properties, amount of incorporated drug, drug solubility, and drug–polymer interactions. This review summarizes the compositional and structural effects of polymers on swelling, loading, and release and approaches to characterize solute release behavior in a dynamic state. A new approach is introduced to compensate drug effects (solubility and loading) with the release kinetics by varying the structure of heterogeneous polymers. Modulated or pulsatile drug delivery using functional hydrogels is a recent trend in hydrogel drug delivery.     

Interpenetrating Polymer Networks polysaccharide hydrogels for drug delivery and tissue engineering

The ever increasing improvements of pharmaceutical formulations have been often obtained by means of the use of hydrogels. In particular, environmentally sensitive hydrogels have been investigated as “smart” delivery systems capable to release, at the appropriate time and site of action, entrapped drugs in response to specific physiological triggers. At the same time the progress in the tissue engineering research area was possible because of significant innovations in the field of hydrogels. In recent years multicomponent hydrogels, such as semi-Interpenetrating Polymer Networks (semi-IPNs) and Interpenetrating Polymer Networks (IPNs) have emerged as innovative biomaterials for drug delivery and as scaffolds for tissue engineering. These interpenetrated hydrogel networks, which can be obtained by either chemical or physical crosslinking, in most cases show physico-chemical properties that can remarkably differ from those of the macromolecular constituents. Among the synthetic and natural polymers that have been used for the preparation of semi-IPNs and IPNs, polysaccharides represent a class of macromolecules of particular interest because they are usually abundant, available from renewable sources and have a large variety of composition and properties that may allow appropriately tailored chemical modifications. Sometimes both macromolecular systems are based on polysaccharides but often also synthetic polymers are present together with polysaccharide chains.