Total hip arthroplasty with the use of nonmodular cementless acetabular component

Sixty-seven hips in 63 patients who underwent total hip arthroplasties with the use of the nonmodular cementless acetabular component and alumina-on-polyethylene bearing surface were available for complete clinical and radiographic review at a mean follow-up period of 7 (range 5-9) years. The mean age was 59 years (range 34-75) years. The mean preoperative Harris hip score of 50 points improved to 93 points at final follow-up. One (1.5%) hip required revision for a recurrent dislocation. No component was loose radiographically at final follow-up. The mean linear wear rate was 0.07 (range 0.01-0.23) mm/y. At a mean follow-up of 7 years, there was no aseptic loosening. Further follow-up, however, is necessary to determine the potential advantage of nonmodular acetabular component for the development of pelvic osteolysis.     

The optimal fixation of the cementless acetabular component in primary total hip arthroplasty.

The optimal fixation of the acetabular component in primary total hip arthroplasty remains controversial. Long-term follow-up studies show that significant loosening rates occur with cemented acetabular components and that these problems persist despite attempts to improve cementing technique. Cementless acetabular components that rely on biologic fixation can have lower rates of radiographic loosening at 10 years compared with cemented acetabular components. Although revision rates for both modes of fixation are largely equivalent at 10 years, the superior radiographic performance of cementless acetabular components at 10 years suggests that biologic fixation through bone ingrowth may provide more durable long-term implant survival compared with cemented fixation. Osteolysis is the major obstacle to long-term cementless acetabular component survival. Potential future options that may inhibit osteolysis include decreasing bone resorption that results from debris-stimulated foreign body response through the use of medications; decreasing the number of particles generated by using alternative bearing surfaces; and improving bone ingrowth, particularly through the use of growth factors and improved implant materials and designs.     

Revision total hip arthroplasty using a cementless acetabular component: technique and results

One hundred thirty-eight acetabular revisions for aseptic loosening were performed in 132 patients using a cementless hemispherical component coated with titanium mesh and inserted with supplemental screw fixation. Twelve patients died, 9 were lost to follow-up and 6 could not return, leaving 111 patients (115 hips) at mean 100 months follow-up. Thirteen hips required revision (11%); 4 for recurrent dislocations, 6 for sepsis, and 3 stable cups were revised (at the time of stem revision). No cup was revised for aseptic loosening. Radiographic review was available for 105 patients (109 hips) at mean 98 month follow-up (78 to 135 months). One hundred cups (91%) were considered stable. Seven cups were possibly unstable (7%), one cup was probably unstable (1%), and one septic hip had an unstable cup (1%). Four percent of the cups showed a complete radiolucency. A partial progressive radiolucency was seen in 3%, a partial nonprogressive radiolucency in 54%, and no radiolucency was present in 39%. A screw radiolucency was seen in 2%, and osteolysis at the cup margin in 4%. Revision of the acetabulum with a cementless porous-coated hemispherical fiber-metal component seems to be superior to the results reported for acetabular revisions with cement at similar follow-up.     

Isoelastic femoral component in primary cementless total hip arthroplasty

We followed 100 patients (111 hips) who underwent primary total hip arthroplasty between July 1988 and June 1995 using the isoelastic femoral component. The average age was 61 (30-70) years. Mean follow-up time was 8.4 (5-12) years. Three femoral components were revised for aseptic loosening and one for disabling thigh pain. Six additional femoral components were considered probably loose by the radiographic criteria. Osteolysis around the femoral component was noted in only two patients who were clinically asymptomatic. A high incidence (41%) of lateral migration of the tip of the femoral components was noted, but there was no significant distal migration. Nine patients complained of thigh pain, which interfered with their daily activities. The average Harris hip score improved from 49 to 80 at the latest follow-up. We believe that the principle of isoelasticity in hip replacement is important; however, improvements in the material and the design of the femoral component are required.     

Plasma spray-coated Ti femoral component for cementless total hip arthroplasty

A retrospective study of the clinical and radiographic results of Mallory Head total hip arthroplasties in 67 patients (76 hips) with a mean age of 50.1 years was undertaken. The mean follow-up period was 10.1 years (9-13years). In this study, excellent or good clinical results were found for 64 patients. Minimal thigh pain was found in 3 patients (4.4%). Seventy-one hips (93.4%) showed fixation by bony ingrowth and 3 (3.9%) showed stable fibrous fixation. Bony ongrowth and ingrowth were also seen in 16 hips (21%) at distal smooth and grit-blast areas. Two femoral components were revised (survival rate, 97.3%), one for subsidence and other for recurrent infection. We believe that these good results were caused by excellent bony ingrowth on the proximal two thirds of the femoral surface area. In conclusion, proximal plasma-spray coating and the tapered shape of the Ti stem showed excellent bony ingrowth and initial stability. Our results indicate that the tapered shape will be an important element in the design of a cementless Ti stem.     

Radiographic and clinical analysis of cementless acetabular fixation in total hip arthroplasty

Tofruetancloc nthisoitpnru sac.rttih oOrnorpig ltaiensctahylln y(i,qTuH emAa)jfoo irrs a Td HweteAelrli-o etrseatctaehbdnliiqs huheeidpsutilized bone cement for fixation,but loosening rate ofthe acetabular component was very high because ofbone cement tec…     

髋关节发育不良患者全髋关节置换术的髋臼中心化

目的 探讨采用全髋关节置换术(THA)治疗髋关节发育不良继发骨关节炎术中髋臼杯假体放置的方法及其对手术疗效的影响。方法 对38例(44髋)于1989年9月至2003年4月接受全髋人工关节置换术的髋关节发育不良继发骨关节炎患者进行了随访。其中男14例,女24例,平均年龄51．2岁(29～80岁),平均随访36．4个月(8～168个月)。按Crowe方法进行分类：Ⅰ型12髋,Ⅱ型24髋,Ⅲ型7髋,Ⅳ型1髋。测量泪滴与髋旋转中心的水平距离并与术后测量结果比较。结果 髋臼杯假体中心化放置者24髋,未加深髋臼者20髋。术后两组Harris评分分别为90．2分、86．3分。结论 对于多数髋关节发育不良患者在行THA时,术中加深髋臼而将髋旋转中心内移和下移,可使髋臼杯假体置于中心化位置得到牢固固定及满意的骨覆盖,术后获得良好的临床疗效。     

Three- to five-year results with the cementless Harris-Galante acetabular component used in hybrid total hip arthroplasty

Summary In this paper we present our 3- to 5-year results after hybrid total hip replacement using the cementless porous coated Harris-Galante acetabular component and the cemented Griss femoral component in 39 patients with 40 implantations. Postoperatively, mild to moderate pain was experienced by 16.1% of patients, mostly following hard activity. A slight to moderate limp occurred in 24.2%. All patients were able to walk more than 1000 m. Full-time use of support was required by 2.8%. The postoperative range of motion was increased in 93.9%. Radiographically, none of the acetabular or femoral components had to be classified as unstable. Only one acetabular component displayed complete (i.e., along all interface zones) radiolucency and was therefore classified as possibly unstable.     

Fate of cementless acetabular components retained during revision total hip arthroplasty

BACKGROUND: Removal of a well-fixed cementless acetabular component can result in increased operative time and postoperative morbidity. The objectives of this retrospective study were to determine whether retention of a well-fixed acetabular component at the time of isolated femoral revision was compatible with long-term socket survival. METHODS: The records of eighty-three consecutive patients (ninety hips) in whom a well-fixed cementless socket had been retained during revision of a femoral component were reviewed. The mean age of the patients was 48.7 years at the time of the primary arthroplasty and 54.1 years at the time of femoral revision. The radiographic analysis was based on anteroposterior radiographs and was performed by a single independent reviewer. The intraoperative criterion for stability of the socket was the absence of movement at the bone-implant interface during the application of direct pressure to the edges of the socket in four quadrants with use of a metallic pusher. RESULTS: At the time of the isolated femoral revision, no socket demonstrated a radiolucent line measuring >1 mm in any two zones and forty of the ninety hips had periacetabular osteolysis. The mean size of the osteolytic lesions was 5.71 cm(2) (range, 0.4 to 24.2 cm(2)), and twenty-eight of the forty hips underwent bone-grafting. The mean duration of follow-up was 9.7 years after the isolated femoral revision and 14.9 years after the primary arthroplasty. Five acetabular sockets were revised at a mean of 6.8 years after the femoral revision. Only one of these sockets had failed because of aseptic loosening. With revision of the acetabular component for any reason as the end point, the survival rate was 98.7% at five years and 93.5% at ten years after the femoral revision and 100% at ten years and 93.9% at fifteen years after the primary arthroplasty. No hip showed recurrence or expansion of periacetabular osteolysis. The prevalence of dislocation was 16% (fourteen of ninety). CONCLUSIONS: Revision of a stable, cementless acetabular component solely on the basis of its duration in vivo or the presence of periacetabular osteolysis does not appear to be warranted. Retention of the socket with grafting of larger periacetabular osteolytic lesions appears to be consistent with satisfactory socket longevity.     

Revision total hip arthroplasty for large medial (protrusio) defects with a rim-fit cementless acetabular component

Seventeen patients (19 hips) with protrusio acetabuli resulting from a failed total hip arthroplasty, large medial bone defect, and an intact bony rim were treated with an oversized cementless acetabular component and medial morcelized allograft. An average of 55% of the revision component was not supported by host bone. At an average follow-up of 2.8 (range 2-6) years, none of the acetabular components required revision for loosening. The average cup position preoperatively was 10.5 mm medial to Köhler's line and postoperatively was 6.8 mm lateral to Köhler's line. Despite very large medial defects, reconstructions with this technique remained stable.     

The use of a constrained acetabular component to treat instability after total hip arthroplasty

BACKGROUND: Recurrent dislocation after total hip arthroplasty is a disabling complication that can be difficult to treat and may not be amenable to nonoperative management. The purpose of the present study was to evaluate the clinical and radiographic outcome associated with the use of a constrained acetabular component as a salvage treatment for instability after hip arthroplasty. METHODS: We retrospectively reviewed the clinical and radiographic outcome of 110 arthroplasties, in 109 patients, that had been performed with use of a single design of constrained acetabular component. In seventy-nine hips the constrained component was implanted for the treatment of recurrent instability, and in thirty-one hips it was implanted because of absent or grossly deficient soft-tissue attachments that were believed to be associated with a high risk for subsequent instability. RESULTS: The constrained acetabular device eliminated or prevented hip instability in all patients except two, who continued to have sensations of subluxation. The mean Harris hip score improved significantly, from 62.7 points preoperatively to 76.4 points at the time of the latest follow-up (p < 0.0001). There were no instances of dislocation or disassembly of the hip components. Radiographic analysis revealed radiolucent lines around the cup in fifteen hips (14%). There was a total of nine revisions: six for deep infection, two for acetabular component loosening, and one for a periprosthetic fracture of the femur. CONCLUSIONS: A constrained acetabular component reliably restores and maintains hip stability in patients with recalcitrant recurrent instability and can dependably prevent dislocation in those who are at high risk because of absent or deficient soft tissues about the hip. However, because of the early appearance of radiolucent lines around some components and concerns about long-term fixation, the use of these devices should be reserved for situations in which other methods are inadequate or have already failed.     

Matched-pair analysis of cemented and cementless acetabular reconstruction in primary total hip arthroplasty

In a matched-pair study of primary total hip arthroplasty, 45 all-polyethylene cemented acetabular components were compared with 45 cementless, hemispheric, titanium acetabular components. At 9 to 12 years, 1 of the cemented acetabular components was revised for aseptic loosening, and 14 (31%) were radiographically loose. Nine (20%) cemented acetabular components had pelvic osteolysis. In the cementless acetabular component group, 2 well-fixed components were revised. No components were radiographically loose, and 3 (7%) had pelvic osteolysis. Thirty-eight (97%) of the patients in each group were satisfied with the surgery. The clinical results of the cemented and cementless components were excellent. The cementless components had less loosening (P <.001) than the cemented components.     

Second-generation cementless total hip arthroplasty in patients with osteonecrosis of the femoral head

The results of cementless total hip arthroplasties in patients with osteonecrosis have been inferior to those in patients with other diagnoses. Fifty-eight primary total hip arthroplasties with insertion of a femoral stem with a circumferentially proximal porous coating and a cementless acetabular component were followed for a mean of 11.1 years. Fifty-seven (98%) of 58 stems were biologically stable, and one stem was loose. There were acetabular revisions in 18 hips (31%) because of polyethylene wear and osteolysis. One hip (1.7%) underwent revision of both acetabular and femoral components. Osteolysis around the acetabular component was seen on radiographs in 22 hips (37.9%). Femoral osteolysis was seen in 9 hips (15.5%), and there was no osteolysis below the lesser trochanter in any hip. Second-generation femoral prostheses provide excellent fixation in patients with osteonecrosis of the femoral head. However, a high rate of polyethylene wear and osteolysis in these high-risk patients remains a challenging problem.     

The influence of acetabular component position on wear in total hip arthroplasty

Our experience has implicated cup inclination as an important factor in wear, whereas others have suggested that the hip center of rotation (COR) must be closely reestablished to reduce wear. We conducted a retrospective study to determine the relative importance of these 2 factors. One hundred thirty-nine total hip arthroplasties were studied after a mean follow-up of 9.2 years (range, 6-3 years). Forty-nine of 139 operated hips had a contralateral normal hip, which allowed the most accurate measurement of the influence of change in the COR. Wear was related to the inclination of the cup but not to a change in the COR. Secondarily, wear was less with a ceramic-polyethylene polyarticular surface than with metal-polyethylene. The importance of this data is related to cup implantation techniques. The hip COR can be moved superiorly and/or medially to permit cup inclination below 45 degrees with correct cup coverage.     

Use of structural bone graft with cementless acetabular cups in total hip arthroplasty

We retrospectively studied 15 primary and 13 revision total hip arthroplasties in which structural acetabular bone grafts were used in conjunction with cementless acetabular cups (for 11 type I segmental acetabular defects and 17 type III combined segmental/cavitary acetabular defects). Mean follow-up was 7.7 years in the primary and 6.8 years in the revision group. Radiographic analysis was performed to assess graft incorporation, component migration, bone-implant radiolucencies, and polyethylene wear. Two acetabular components (7.1%) were radiographically loose and demonstrated component migration. One of the two patients with these components also showed evidence of eccentric polyethylene wear. Three patients (10.7%) exhibited eccentric polyethylene wear. All grafts were well-incorporated radiographically without evidence of resorption. Modified Harris hip scores for all patients improved postoperatively.     

Minimum 10-year radiographic follow-up of a cementless acetabular component for primary total hip arthroplasty with a bulk autograft

We radiographically investigated 36 hips in 34 patients with osteoarthritis of the hip who had undergone total hip arthroplasty. Their mean age was 59.2 years (range 36–79 years), and the mean follow-up period was 11.2 years (range 10–14 years). The long-term outcome and the chronological changes in the bulk autograft were examined. The acetabular component of the prosthesis was a Lord-type threaded cup with a smooth surface. At follow-up, bone absorption was minor in 17 joints, moderate in 11, and major in 8. The hips with graft coverage of 20% (group A) had a significantly higher loosening rate than hips with coverage of 20% (group B) (P 0.05). The cup position changed markedly in group A. Our findings indicate that graft coverage should be less than 20% when a bulk graft is used together with a smooth-surfaced cementless cup.     

非水泥臼杯处理髋臼内陷的全髋关节置换术

[目的]探讨全髋关节置换术(THA)中使用非水泥髋臼假体处理髋臼内陷的适应证、手术技术以及术后疗效.[方法]从1998～2009年,共38人(46髋)伴有髋臼内陷的患者接受非骨水泥臼杯的全髋关节置换术,男34髋,女12髋,平均年龄45岁.其中14髋术中行自体骨移植,术后随访1～8年(平均3年).回顾分析手术技术,使用Harris、Charnley评分标准进行临床疗效评估,用髋关节止侧位X线片进行影像学评估.[结果]平均Harris评分由术前的48.5分提高到末次随访的85.1分,平均Charley评分由9.1分提高到15.7分.术后股骨头中心位置较术前外移、下移.所有患者髋臼组件稳定,没有出现明确的假体松动、断裂、移位、脱位或移植骨的重吸收.[结论]使用非水泥臼杯的全髋关节置换术,根据骨缺损情况结合自体骨移植,能有效治疗各种程度的髋臼内陷,恢复髋臼旋转中心的解剖位置,短中期临床疗效满意.