Failure of hydroxyapatite-coated acetabular cups. Ten-year follow-up of 85 Landos Atoll arthroplasties

Between March 1990 and May 1991 we performed 85 primary total hip replacements in 74 patients using the Landos Atoll hydroxyapatite (HA)-coated cup and the Corail HA-coated stem. The patients were followed up for a mean of ten years. Of the 85 cups, 26 (31%) have already been revised and a further six are radiologically unstable and awaiting revision. Two femoral stems have been revised for infection without loosening. The retrieved acetabular cups were studied by SEM and image-processing techniques to quantify the amount of residual HA on the cup. This was correlated with the clinical variables and modes of failure. The residual HA (as a percentage of the surface) on the loose cups correlated negatively with the duration of implantation (r = -0.732, p < 0.001). Six cups were stable at revision and had more residual HA coating than those which were loose (p < 0.01). The rate of failure of the Landos Atoll HA-coated, smooth hemispherical cup with screw fixation is unacceptably high. Resorption of the HA coating is markedly increased in loose cups compared with stable cups. HA coating cannot substitute for stable mechanical fixation.     

Measurement of extent of bone ongrowth and hydroxyapatite absorption in retrieved acetabular cups

BACKGROUND: To understand why hydroxyapatite (HA)-coated acetabular cups did not produce satisfactory results, we measured the extent of bone ongrowth and HA absorption of the retrieved cups. METHODS: Between March 1992 and June 1998, a total of 289 patients underwent total hip arthroplasty with an HA-coated ABG (Anatomical Benoist Giraud) prosthesis in our hospital. We revised 71 cups in our hospital, 43 of which were included in this study. The cups were in situ for an average of 80.4 months. We revised 21 cups for polyethylene wear and osteolysis, 20 for loosening, and 2 for recurrent dislocation. The outer surfaces of the cups were subdivided by two circular grooves into three areas: central, middle, peripheral. Bone ongrowth and HA absorption was measured in terms of area and thickness. The areas were graphically calculated using a computer imaging analysis system. The thickness of the HA coating remaining on the retrieved cup was measured by an x-ray coating thickness measurement instrument. RESULTS: Of the 43 cups, 37 had bone ongrowth. Bone ongrowth was observed on the central surface in 23 cups, on the middle surface in 27 cups, and on the peripheral surface in 15 cups; 6 of the 37 cups had bone ongrowth only in the groove. Altogether, 37 cups showed bone ongrowth on 6.43% of the outer acetabular surface. HA absorption appeared in all 43 cups, and an average 63.21% of the HA coating area was absorbed. there was a proportional relation between the rate of HA absorption and implantation duration, but there was no consistent trend between the thickness of the HA coating and implantation duration. CONCLUSIONS: We suggest that progressive HA absorption and minimal bone ongrowth are related to the failure of HA-coated acetabular cups at long-term follow-up after total hip arthroplasty.     

High osteolysis and revision rate with the hydroxyapatite-coated ABG hip prostheses65 hips in 56 young patients followed for 5–9 years

Background?There are few reports on the outcome of uncemented HA-coated cups in young patients.Patients?I evaluated the 7-year (5–9) results of HA-coated hip prosthesis (ABG, Stryker) in a consecutive series of 65 primary arthroplasties on 56 patients (mean age 44 years). 2 patients were lost to follow-up and 3 died.Results?The cumulative survival rate with revision for any reason as endpoint at 9 years was 98% (95% CI, 96–100) for the stem, 69% (61–77) for the acetabular metal backing, and 59% (50–67) for the polyethylene liner. 15 of 65 cups were revised on average 6 years after the primary operation and 3 more are planned. Revisions were done in 3 hips because of loosening and migration of the cup, and in 12 hips because of wear and progressive osteolysis around stable components. Only hips with migration had clinical symptoms. Visual inspection of polyethylene liners revealed wear of the articulation in all cases, loosening of the locking mechanism in 10 cases and nonarticular surface deformity in 7 hips. All original stems are in situ although femoral osteolysis was seen in 12 cases and 1 hip was reoperated because of periprosthetic traumatic fracture. Despite the high revision rate, the clinical improvement was good: the average pre- and postoperative Harris Hip Scores at the most recent follow-up were 41 and 90, respectively.Interpretation?While the results on the femoral side were good, the survival rates of the acetabular cups were poor and we stopped using ABG I hip prostheses.     

High osteolysis and revision rate with the hydroxyapatite-coated ABG hip prostheses: 65 hips in 56 young patients followed for 5-9 years

BACKGROUND: There are few reports on the outcome of uncemented HA-coated cups in young patients. PATIENTS: I evaluated the 7-year (5-9) results of HA-coated hip prosthesis (ABG, Stryker) in a consecutive series of 65 primary arthroplasties on 56 patients (mean age 44 years). 2 patients were lost to follow-up and 3 died. RESULTS: The cumulative survival rate with revision for any reason as endpoint at 9 years was 98% (95% CI, 96-100) for the stem, 69% (61-77) for the acetabular metal backing, and 59% (50-67) for the polyethylene liner. 15 of 65 cups were revised on average 6 years after the primary operation and 3 more are planned. Revisions were done in 3 hips because of loosening and migration of the cup, and in 12 hips because of wear and progressive osteolysis around stable components. Only hips with migration had clinical symptoms. Visual inspection of polyethylene liners revealed wear of the articulation in all cases, loosening of the locking mechanism in 10 cases and nonarticular surface deformity in 7 hips. All original stems are in situ although femoral osteolysis was seen in 12 cases and 1 hip was reoperated because of periprosthetic traumatic fracture. Despite the high revision rate, the clinical improvement was good: the average pre- and postoperative Harris Hip Scores at the most recent follow-up were 41 and 90, respectively. INTERPRETATION: While the results on the femoral side were good, the survival rates of the acetabular cups were poor and we stopped using ABG I hip prostheses.     

High osteolysis and revision rate with the hydroxyapatite-coated ABG hip prostheses

Background There are few reports on the outcome of uncemented HA-coated cups in young patients.

Patients I evaluated the 7-year (5-9) results of HA-coated hip prosthesis (ABG, Stryker) in a consecutive series of 65 primary arthroplasties on 56 patients (mean age 44 years). 2 patients were lost to follow-up and 3 died.

Results The cumulative survival rate with revision for any reason as endpoint at 9 years was 98% (95% CI, 96-100) for the stem, 69% (61-77) for the acetabular metal backing, and 59% (50-67) for the polyethylene liner. 15 of 65 cups were revised on average 6 years after the primary operation and 3 more are planned. Revisions were done in 3 hips because of loosening and migration of the cup, and in 12 hips because of wear and progressive osteolysis around stable components. Only hips with migration had clinical symptoms. Visual inspection of polyethylene liners revealed wear of the articulation in all cases, loosening of the locking mechanism in 10 cases and nonarticular surface deformity in 7 hips. All original stems are in situ although femoral osteolysis was seen in 12 cases and 1 hip was reoperated because of periprosthetic traumatic fracture. Despite the high revision rate, the clinical improvement was good: the average pre- and postoperative Harris Hip Scores at the most recent follow-up were 41 and 90, respectively.

Interpretation While the results on the femoral side were good, the survival rates of the acetabular cups were poor and we stopped using ABG I hip prostheses.     

The performance of two hydroxyapatite-coated acetabular cups compared with Charnley cups. From the Norwegian Arthroplasty Register

We have compared the survival of two hydroxyapatite (HA)-coated cups, 1208 Atoll hemispheric and 2641 Tropic threaded, with cemented Charnley all-polyethylene cups (16 021) using the Cox regression model. The Tropic cup used in combination with an alumina ceramic femoral head, had good results, similar to those of the Charnley cup. When used in combination with a stainless-steel head, however, the risk of revision beyond four years was increased 3.4 times for the Tropic cup compared with the Charnley cup (p < 0.001). Over the same period, the Atoll cup had an increased risk of revision of 3.8 times when used with the alumina heads (p < 0.001) and an increased risk of 6.1 times when used with stainless-steel heads (p < 0.001). Revision because of wear and osteolysis was more common with both types of HA-coated cup than with the Charnley cup. The rate of revision of the Atoll cup because of aseptic loosening was also increased. We found that HA-coated cups did not perform better than the Charnley cup.     

Wear and periprosthetic osteolysis of modular, hemispheric acetabular cups]

Osteolysis associated with polyethylene wear has become one of the most prevalent complications associated with uncemented modular, hemispherical cups. Sixty-five consecutive total hip arthroplasties (ABG i, Howmedica, Stryker) were followed 6-12 years. Cumulative survivorship for the cup was 55.7% after 10 years. There were 20 cups revisions because of polyethylene wear and periprosthetic osteolysis (14 cups) or cup loosening (6 cups). Stability was assessed intraoperatively, 14 cups were revised, whereas 6 new polyethylene cups were cemented into stable metal-back of acetabular component. The average annual wear of revised cups was 0.32 mm. The annual wear of not revised cups was 0.12 mm. The differences were statistically significant (p = 0.002). The mean area of osteolysis was 472 mm2 (SD 257 mm2). There was no significant correlation between wear and area of osteolysis. There was significant correlation R = 0.54, p = 0.014) between time to revision and area of osteolysis. There were no significant differences of wear of polyethylene inlay or area of osteolysis between stable and unstable acetabular cups.     

13-Jahres-Ergebnisse der CLS-Spreizpfanne in der primären Hüftendoprothetik

BACKGROUND: Clinical studies of the CLS expansion cup in hybrid hip arthroplasty generally show good results. However, follow-up times are limited to between 5 and 10 years. The aim of our study was to assess the clinical and radiological outcome of the CLS cup after more than 10 years. MATERIAL AND METHOD: After a follow-up of 13 years (10-15 years), 41 of 186 patients with a total of 41 CLS cups were available for clinical and radiological evaluation. In addition, a digital analysis of all radiographs was done. This included measurement of the migration, inclination, polyethylene wear, shaft subsidence, and osteolytic lesions. RESULTS: The average preoperative Harris hip score was 48, which increased to 81 at final follow-up. No acetabular loosening was found. Two cups (5%) showed osteolytic lesions not exceeding 50% of the specific zone according to DeLee and Charnley and were considered stable. There was no migration or inclination of the cups. The average polyethylene wear corresponded to 0.1 mm/year. Sixteen patients (39%) showed osteolyses around the stem and were considered loose. CONCLUSION: The CLS expansion cup provides excellent clinical results after 13 years in hybrid total hip arthroplasty. Time-correlative polyethylene wear and the extremely high rate of stem loosening have no consequences for the cup stability in our patient group. Acetabular osteolysis is rare.     

The Harris-Galante Porous acetabular component at intermediate follow-up

Outcome of the acetabular component in 90 consecutive primary noncemented total hip arthroplasties (THAs) was prospectively studied. The acetabular cup consisted of a hemispherical titanium alloy shell with a titanium fiber-mesh porous coating and a modular polyethylene liner (Harris-Galante Porous-1, Zimmer, Warsaw, Ind). The cup was implanted using line-to-line reaming with adjunctive dome screw fixation. The femoral component consisted of a titanium alloy stem with titanium fiber-mesh porous coating and a 28-mm cobalt-chrome modular head. Mean patient age was 53 years (range: 27-75 years); male:female ratio was 48:42; and mean follow-up was 6 years (range: 4.5-8 years). One acetabular component was revised for aseptic loosening. Of 81 unrevised hips available for follow-up, mean Harris hip score was 57 preoperatively and 96 at final follow-up (72% excellent, 15% good, 1 3% fair, and none poor). Of 61 unrevised hips with adequate radiographic follow-up, radiographic failure (complete periprosthetic radiolucency) was evident in 3 (4.9%) and periacetabular osteolysis in none. Radiographic failure did not correlate with poor clinical outcome. Linear polyethylene wear rate (mean: 0.13 mm/year) did not correlate with age, gender, weight, outcome, or cup abduction angle, but did correlate with the presence of femoral periprosthetic osteolysis (0.18 mm/year with femoral osteolysis versus 0.11 mm/year without; P= .01). This series of porous-coated hemispherical cups demonstrated excellent intermediate-term clinical and radiographic outcome, comparable with similarly favorable results reported by the prosthesis designers. A potentially adverse effect of polyethylene wear on the longevity of a THA was supported by a positive correlation between polyethylene wear rate and femoral osteolysis.     

The Harris-Galante total hip arthroplasty: a minimum 8-year follow-up study

A total of 93 Harris-Galante Porous I (HGP- I) prostheses were analyzed with a mean follow-up of 10.2 years. Thigh pain (28 hips) correlated with unstable fixation (P<.005), female gender (P<.045), young age (P<.05), poor distal femoral fill (P<.002), subsidence (P<.0001), and osteolysis (P<.05). Thirteen stems and 6 metallic shell cups were revised. Kaplan-Meier analysis showed 13-year survival rates of 92.5% +/- 5.8% for the metallic shell cup, 79.7% +/- 13% for the HGP-I cup, and 76.3% +/- 14.0% for the stem. Five polyethylene liners were changed because of wear >1 mm. Radiographic loosening occurred in 8 cups. Radiographic bone ingrowth was present in 54 stems, stable fibrous fixation was present in 24 stems, and unstable fixation was present in 15 stems. The mean polyethylene wear was 0.17 mm/y. Eleven hips (11.8%) had acetabular osteolysis, and 24 (25.8%) had femoral osteolysis, the latter being more frequent in unstable stems (P<.007). The HGP-I metallic cup shows better clinical and radiographic results than the stem, which frequently is associated with pain, unstable fixation, and osteolysis. Excessive polyethylene wear is frequent.     

Results of the uncemented total hip arthroplasty in avascular necrosis of the femoral head]

AIM OF THE STUDY: The results from 56 patients with osteonecrosis of the femoral head who underwent 66 uncemented total hip replacements were analyzed and compared with current reports in the literature on cemented endoprosthesis. METHODS: In the retrospective study in 30 of those cases the Zweymüller and in 25 cases the HA-coated ABG prosthesis were used. In addition the results of 11 patients with a polyethylene Endler cup in combination with a Zweymüller stem are presented. The mean age at surgery was 48 years, the mean follow-up was 5.9 years. Clinical examination, registration of the Merle d'Aubigné score and a radiological examination were performed. RESULTS: The clinical results did not show any differences between the used prostheses. A more favourable outcome with regard to the Merle d'Aubigné score was demonstrated for the Zweymüller and ABG prostheses. No loosening of the stem was found. Revision as a consequence of aseptic loosening of the acetabular component was done in 7,5 % (27,3 % of the Endler cups and 8 % of the ABG cups). 20 % of the patients with an ABG prosthesis showed acetabular osteolysis of various degrees. This seems to be correlated with an increased polyethylene wear. CONCLUSION: Recent reports in the literature about a favourable outcome in uncemented total hip arthroplasty in osteonecrosis of the femoral head can be confirmed. The unsatisfactory results of the Endler cup indicate that established types of endoprostheses should be preferred.     

Experiences with the Plasmacup--early stability, wear, remodelling, and outcome

Whilst advances in cementing technique have led to improvement in the survival of cemented femoral stems in total hip arthroplasty (THA), cup failure due to aseptic loosening remains a major clinical problem. These observations have led to a move away from cemented cup designs, particularly in young patients, towards uncemented implants. The Plasmacup is a hemispherical, press-fit, cementless, titanium-shelled, acetabular component with a polyethylene liner. In this article we review our experience of its pattern of early migration, wear, bone remodelling, and mid-term survival. In 18 cups followed for 2 years in subjects with a mean age at operation of 58 years, the mean total vectorial cup migration was 0.75 mm, and cup orientation remained stable (EBRA method). The mean polyethylene linear wear rate over this period was 0.21 mm/year. In 27 cups followed for 6 months using dual-energy X-ray absorptiometry (DXA), average bone loss was -5%, and the pelvic bone-remodelling pattern was consistent with the rim-loading principle of the cup design. In a clinical review of the outcome of 128 cups in 104 patients with a mean age at operation of 51 years and follow-up of 59 months, we found that 82% of patients had a good or very good Merle D'Aubigne score, and cup survival rate was 98% (Kaplan-Meier). Four cups had small radiographic areas of focal osteolysis and three had been revised (two for recurrent dislocation and one for deep sepsis; none were revised for aseptic loosening). The mean linear wear rate in this series was 0.14 mm/year. In conclusion, the Plasmacup shows satisfactory early stability, a wear rate similar to other uncemented cups, and favourable mid-term clinical function and survival rates.     

Cementless total hip replacement: past, present, and future

Cementless total hip replacement (THR) is rapidly being accepted as the surgery for arthritic diseases of the hip joint. The bone-ingrowth rate in porous-type cementless implants was about 90% over 10 years after surgery, showing that biological fixation of cementless THR was well maintained on both the stem and cup sides. As for the stress shielding of the femur operated using a distal fixation-type stem, severe bone resorption was observed. The severe bone resorption group showed continuous progression for more than 10 years after surgery. Stem loosening directly caused by stress shielding has been considered less likely; however, close attention should be paid to bone resorption-associated disorders including femoral fracture. Cementless cups have several specific problems. It is difficult to decide whether a cup should be placed in the physiological position for the case of acetabular dysplasia by bone grafting or at a relatively higher position without bone grafting. The bone-ingrowth rate was lower in the group with en bloc bone grafting, and the reactive line was frequently noted in the bone-grafted region. Although no data indicated that en bloc bone grafting directly led to poor outcomes, such as loosening, cup placement at a higher site without bone grafting is now selected by most operators. The polyethylene liner in a cementless cup is thinned due to the metal cup thickness; however, it has been suggested that the apparent relation between the cup size and the wear rate was absent as long as a cementless cup is used. Comparative study indicated cementless THR was inferior with regard to the yearly polyethylene wear rate and incidence of osteolysis on both the stem and cup sides. Meta-analysis study on the survival rate between cement and cementless THR reported that cemented THR was slightly superior. It should be considered that specific problems for cementless THR, especially with regard to polyethylene wear, do occur. This instructional lecture was presented at the 81st annual meeting of the Japanese Orthopaedic Association, Sapporo, May 2008     

Ten to twelve-year results with the Zweymüller cementless total hip prosthesis

Between January 1987 and December 1990, 221 Zweymüller cementless total hip arthroplasties were performed in 211 patients with idiopathic osteoarthritis. A total of 136 patients (142 prostheses) were evaluated at a mean follow-up of 134 months (SD 9.5). The study group consisted of 78 Hochgezogen and 64 Stepless stem prostheses, all with a threaded titanium cup and ceramic head. No clinical and radiological differences were found between the 2 stem prostheses. Seven cups had been revised because of aseptic loosening; 17 cups showed radiolucent lines, osteolysis, or migration. Mean linear polyethylene wear of 105 (74%) cups was 0.46 mm (SD 0.27), with an annual wear of 0.04 mm (SD 0.02). Wear did not correlate with pain, cup migration, radiolucent lines, or osteolysis. Cumulative survival was 96%. Zweymüller cementless total hip arthroplasty showed good midterm results.     

Effect of augmented cup fixation on stability, wear, and osteolysis: a 5-year follow-up of total hip arthroplasty with RSA

To evaluate different modes of cementless fixation of hemispherical cups, we operated on 87 hips in 81 patients using 4 different means of cup fixation. The hips were randomly assigned to fixation with press-fit technique only (PF), or with augmentation with screws (S), pegs (P), or hydroxyapatite (HA) coating. The patients were evaluated with radiostereometric analysis (RSA) for cup migration and wear, conventional radiography for osteolysis, and Harris Hip Score for clinical outcome over 5 years. The fixation of the cups did not differ between the groups, but HA showed a tendency to decrease proximal migration. HA-coated cups displayed the best interface with hardly any signs of radiolucent lines, indicating a superior sealing effect of the HA coating. Cups with screws or pegs had more radiolucent lines and osteolytic lesions than the other groups. Radiolucent lines were correlated to higher proximal migration, young age, and female gender (r2=.2). The wear rate of the ethylene oxide-sterilized polyethylene liner was high (0.2 mm/y) but did not differ between the groups. Two cups with a perioperative fracture of the acetabular rim showed large initial migration but stabilized thereafter.     

Results at a minimum of 10 years of follow-up for AMS and PerFix HA-coated cementless total hip arthroplasty: impact of cross-linked polyethylene on implant longevity

Purpose

The purpose of this study was to report results at a minimum of 10 years for hydroxyapatite (HA) coating on the titanium arc-sprayed cementless total hip arthroplasty (THA) and to evaluate the impact of cross-linked polyethylene (XLPE) on implant longevity.

Methods

A total of 131 consecutive primary THAs in 123 patients using an AMS acetabular cup and a PerFix HA stem were retrospectively reviewed. Conventional PE was used for 62 hips (CPE group) and cross-linked PE for 69 hips (XLPE group), with mean follow-up periods of 13 and 11.5 years, respectively. These patients were reviewed using the Japanese Orthopaedic Association (JOA) Hip Score and evaluated in terms of PE wear, osteolysis, and implant survival.

Results

The JOA score improved from 42.6 to 83.9 points at the final follow-up. The mean wear rate of 0.12 mm/year in the CPE group was significantly greater than that of XLPE at 0.007 mm/year. In the CPE group, ten (16.1 %) and two (3.2 %) hips, respectively, underwent PE exchange due to severe wear and acetabular revision due to loosening associated with osteolysis. Three patients had revision in the XLPE group: one cup for aseptic loosening, one PE for recurrent dislocation, and one stem for neck fracture. No evident osteolysis was seen in the XLPE group. Kaplan–Meier survivorship with any revision as the end point shows that the 12-year survival rate was 97.7 % for cups, 93.8 % for PE liners, and 99.2 % for stems. Multivariate analysis revealed that the use of XLPE significantly reduced the risk of revision, with the odds ratio (OR) of 4.3.

Conclusions

AMS and PerFix HA components in this series show excellent implant fixation; however, high rates of PE wear and subsequent osteolysis were limiting factors in long-term success. Low wear rates with XLPE suggest improved implant longevity.     

Th1 type lymphocyte reactivity to metals in patients with total hip arthroplasty

Introduction

Many kind of hydroxyapatite-coated cups were used, with favorable results in short term studies; it was supposed that its use could improve osteointegration of the cup, enhancing thus stability and survivorship. The purpose of this study is to analyze the long term behavior of the hemispheric HA coated, Dual Radius Osteonics cup and to discuss the way of failure through the exam of the revised components and of both periacetabular and osteolysis tissue.

Materials and Methods

Between 1994 and 1997, at the Department of Orthopedic Sciences of the Insubria University, using the posterolateral approach, were implanted 276 Dual Radius Osteonics^® in 256 patients, with mean age of 63 years.

Results

At a mean follow-up of 10 years (range 8–12 years), 183 cups in 165 patients, were available for clinical and radiographical evaluation. 22 Cups among the 183 were revised (11%). The cause of revision was aseptic loosening in 17 cases, septic loosening in one case, periprosthetic fracture in another case, osteolysis and polyethylene wear in two cases and, finally, recurrent dislocations in the last one. In the remaining patients, mean HHS increased from a preoperative value of 50,15 to a postoperative value of 92,69. The mean polyethylene wear was 1,25 mm (min. 0,08, max. 3,9 mm), with a mean annual wear of 0,17 mm. The mean acetabular migration on the two axis was 1,6 mm and 1,8 mm. Peri-acetabular osteolysis were recorded in 89% of the implants (163 cases). The cumulative survivorship (revision as endpoint) at the time was 88,9%.

Conclusion

Our study confirms the bad behavior of this type of cup probably related to the design, to the method of HA fixation. The observations carried out on the revised cup confirm these hypotheses but did not clarify if the third body wear could be a further problem. Another interesting aspect is the high incidence of osteolysis, which are often asymptomatic becoming a problem for the surgeon as the patient refuses the possibility of a revision.     

Primary Total Hip Arthroplasty With Duraloc Cup in Patients Younger Than 50 Years : A 5- to 7-Year Follow-Up Study

We evaluated the clinical and radiographic results of 67 (64 patients) cementless Duraloc-300 cups for young active patients after a mean follow-up period of 6.2 years. The preoperative mean Harris hip score improved from 46.24 to 96.5 points at 5 years. The survivorship of the cup, using radiographically confirmed aseptic loosening as the end point, was 100% at 5 years. The mean rate of liner wear was 0.125 mm/y (00-0.39 mm/y). Acetabular osteolysis was found in 14% (9 hips) of the 67 hips, and the osteolysis is related to polyethylene wear (P = .0024) and sex (P = .001). Although there was no aseptic loosening of the components, there was a high rate of liner wear of the polyethylene liner and acetabular osteolysis.