Stability of gentamicin sulfate and tobramycin sulfate in extemporaneously prepared ophthalmic solutions at 8 degrees C

The stability of gentamicin sulfate and tobramycin sulfate in fortified ophthalmic solutions stored under refrigeration was studied. Fortified gentamicin ophthalmic solution and fortified tobramycin ophthalmic solution were prepared to a final theoretical concentration of 13.6 mg/mL by using commercially available ophthalmic and injectable solutions. Volumes of each solution were packaged in plastic bottles and refrigerated at 4-8 degrees C. Samples of each solution were analyzed by fluorescence polarization immunoassay on days 0 (before refrigeration), 1, 2, 3, 4, 7, 14, 28, 63, and 91. To validate the method, identical solutions were prepared, stored under refrigeration at 4-8 degrees C, and analyzed by a stability-indicating high-performance liquid chromatographic assay on days 0 (before refrigeration), 9, 28, 56, and 91. Fluorescence polarization immunoassay showed the mean concentrations of gentamicin and tobramycin on day 91 to be 104.4% and 97.4%, respectively, of the time 0 concentrations; the difference was not significant in either case. HPLC validated these results; the mean concentration of gentamicin and tobramycin on day 91 was 103.3% and 101.2%, respectively, of the mean day 0 concentrations. Gentamicin and tobramycin in ophthalmic solutions prepared by mixing ophthalmic and injectable products and stored in plastic bottles at 4-8 degrees C were stable for three months.     

Compatibility of imipenem-cilastatin sodium with commonly used intravenous solutions

The stability of imipenem-cilastatin sodium (Primaxin, Merck Sharp & Dohme) in various intravenous fluids was determined after storage at 4 degrees C or 25 degrees C and after freezing. Samples of imipenem-cilastatin sodium were constituted with 100 mL of each of 17 i.v. fluids to concentrations of 2.5 mg/mL or 5.0 mg/mL of each drug component and stored in glass infusion bottles at constant room temperature (25 degrees C) or constant refrigerated temperature (4 degrees C). The concentration of each solution was determined immediately after constitution by a stability-indicating high-performance liquid chromatographic assay; the concentrations of both drugs were monitored in each i.v. fluid until the time that the concentration of either imipenem or cilastatin decreased to less than 90% of the initial concentration (t90). The exact value of t90 was determined for each solution by linear regression. The solutions were also assessed for changes in pH or color. Cilastatin sodium was more stable in all 17 i.v. fluids than imipenem. The stability of imipenem was dependent on the concentration of that drug in solution; solutions of imipenem 2.5 mg/mL were more stable than solutions of imipenem 5.0 mg/mL. The values of t90 for imipenem in solutions stored at 4 degrees C were greater than the values for solutions stored at 25 degrees C. Imipenem was most stable in 0.9% sodium chloride injection. The pH values of the solutions generally decreased during the study period.(ABSTRACT TRUNCATED AT 250 WORDS)     

Compatibility of ondansetron hydrochloride and methylprednisolone sodium succinate in multilayer polyolefin containers.

PURPOSE: The compatibility of ondansetron hydrochloride and methylprednisolone sodium succinate in 5% dextrose injection and 0.9% sodium chloride injection was studied. METHODS: Test solutions of ondansetron hydrochloride 0.16 mg/mL and methylprednisolone sodium succinate 2.4 mg/mL were prepared in triplicate and tested in duplicate. Total volumes of 4 and 2 mL of ondansetron hydrochloride solution and methylprednisolone sodium succinate solution, respectively, were added to 50-mL multilayer polyolefin bags containing 5% dextrose injection or 0.9% sodium chloride injection. Bags were stored for 24 hours at 20-25 degrees C and for 48 hours at 4-8 degrees C. Chemical compatibility was measured with high-performance liquid chromatography, and physical compatibility was determined visually. RESULTS: Ondansetron hydrochloride was stable for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C. Methylprednisolone sodium succinate was stable for up to 48 hours at 4-8 degrees C. When stored at 20-25 degrees C, methylprednisolone sodium succinate was stable for up to 7 hours in 5% dextrose injection and up to 24 hours in 0.9% sodium chloride injection. Compatibility data for solutions containing ondansetron hydrochloride plus methylprednisolone sodium succinate revealed that each drug was stable for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C. CONCLUSION: Ondansetron 0.16 mg/mL (as the hydrochloride) and methylprednisolone 2.4 mg/mL (as the sodium succinate) mixed in 50-mL multilayer polyolefin bags were stable in both 5% dextrose injection and 0.9% sodium chloride injection for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C.     

Stability and compatibility of reconstituted ertapenem with commonly used i.v. infusion and coinfusion solutions.

PURPOSE: The stability of ertapenem sodium in various commonly used i.v. infusion solutions and its compatibility with coinfusion solutions was studied. METHODS: Ertapenem was reconstituted with sterile water for injection and then diluted with various commercial i.v. infusion solutions to concentrations of 10 and 20 mg/mL. The solutions were stored in flexible polyvinyl chloride containers at 4 and 25 degrees C and in sterile glass vials at -20 degrees C. The drug's stability at 4 degrees C was monitored daily for up to 10 days, at 25 degrees C at appropriate hourly intervals for up to 30 hours, and at -20 degrees C. The daily for up to 14 days. Compatibility with the coinfusion solutions was monitored for up to eight hours at room temperature. Stability assays were conducted until the ertapenem concentration decreased by 10% or the corresponding degradation products exceeded the approved specifications. Ertapenem concentrations were determined by a stability-indicating high-performance liquid chromatography assay. RESULTS: Ertapenem was more stable in solutions stored at 4 degrees C versus 25 degrees C. Samples frozen at -20 degrees C showed extreme variability. Ertapenem 10 mg/mL was stable for a longer time than at the 20-mg/mL concentration. Ertapenem demonstrated the greatest stability in 0.9% and 0.225% sodium chloride solutions. CONCLUSION: Ertapenem sodium injection 10 and 20 mg/mL are relatively stable in sodium chloride injections and Ringer's solution when stored at 25 and 4 degrees C, but are unstable in mannitol and dextrose solutions. The drug can be coinfused with hetastarch, heparin sodium, and potassium chloride over several hours.     

Stability of acetazolamide in suspension compounded from tablets

The stability of acetazolamide in an extemporaneous suspension compounded from tablets was studied. Acetazolamide 25-mg/mL suspension was prepared by levigating the comminuted 250-mg tablets with 70% sorbitol solution. The mixture was incorporated into a suspension vehicle containing magnesium aluminum silicate and carboxymethylcellulose sodium. Appropriate sweeteners, flavoring agents, preservatives, humectants, and pH adjusters were then added. The suspension was stored in amber glass bottles at 5, 22, 30, 40, and 50 degrees C. Samples were analyzed for the concentration of acetazolamide by stability-indicating high-performance liquid chromatography on days 3, 7, 11, 18, 24, 32, 42, 54, and 79. For batches stored at 5, 22, and 30 degrees C, the initial acetazolamide concentration was maintained during the entire 79 days of the study. However, the concentrations in the batches stored at 40 and 50 degrees C were below 90% of the initial value after 79 and 32 days, respectively. The Arrhenius plot was used to predict a shelf life of the suspension at room temperature of 371 days. Acetazolamide oral suspension 25 mg/mL was stable for at least 79 days at 5, 22, and 30 degrees C. The formulation should be maintained at pH 4-5 and stored in amber glass bottles.     

Stability of tiagabine in two oral liquid vehicles.

The stability of tiagabine hydrochloride in two extemporaneously prepared oral suspensions stored at 4 and 25 degrees C for three months was studied. Tiagabine is used for adjunctive therapy for the treatment of refractory partial seizures. It is currently available in a tablet dosage form, which cannot be used in young children who are unable to swallow and given doses in milligrams per kilogram of body weight. No stability data are available for tiagabine in any liquid dosage form. Five bottles contained tiagabine 1 mg/mL in 1% methylcellulose:Simple Syrup, NF (1:6), and another five bottles had tiagabine 1 mg/mL in Ora-Plus:Ora-Sweet (1:1). Three samples were collected from each bottle at 0, 7, 14, 28, 42, 56, 70, and 91 days and analyzed by a stability-indicating high-performance liquid chromatographic method (n = 15). At 4 degrees C, the mean concentration of tiagabine exceeded 95% of the original concentration for 91 days in both formulations. At 25 degrees C, the mean concentration of tiagabine exceeded 90% of the original concentration for 70 days in Ora-Plus:Ora-Sweet formulation and for 42 days in 1% methylcellulose:syrup formulation. No changes in pH or physical appearance were seen during this period. The stability data for two formulations would provide flexibility for compounding tiagabine. Tiagabine hydrochloride 1 mg/,mL in extemporaneously prepared liquid dosage forms and stored in plastic bottles remained stable for up to three months at 4 degrees C and six weeks at 25 degrees C.     

Stability and sorption of FK 506 in 5% dextrose injection and 0.9% sodium chloride injection in glass, polyvinyl chloride, and polyolefin containers.

The effects of the diluent, the storage container, light, and infusion through various types of tubing on the stability and sorption of FK 506 were studied. Solutions of FK 506 in 0.9% sodium chloride injection or 5% dextrose injection were stored at room temperature (24 +/- 2 degrees C) in glass i.v. bottles, polyvinyl chloride (PVC) minibags, and polyolefin containers. FK 506 solution in 0.9% sodium chloride injection was stored in plastic syringes at room temperature and either exposed to normal room light or stored in the dark. FK 506 solution in 5% dextrose injection was placed in plastic syringes and infused through PVC anesthesia extension tubing, PVC i.v. administration set tubing, and fat emulsion tubing over a two-hour period. The infused samples and samples collected from the containers and syringes at intervals up to 48 hours were analyzed for FK 506 concentration by high-performance liquid chromatography. FK 506 concentrations remained greater than 90% of initial concentration for admixtures in 5% dextrose injection stored in glass bottles for 48 hours and for admixtures in 5% dextrose injection or 0.9% sodium chloride injection stored in polyolefin containers for 48 hours. No change in concentration was measured for admixtures in 0.9% sodium chloride injection stored in plastic syringes, and exposure to light did not affect the stability of FK 506 solution. No substantial change in concentration occurred in FK 506 solution in 5% dextrose injection infused through PVC anesthesia extension tubing, PVC i.v. administration set tubing, or fat emulsion tubing. FK 506 admixtures prepared with 5% dextrose injection or 0.9% sodium chloride injection should be stored in polyolefin containers. If polyolefin containers are not available, solutions should be prepared with 5% dextrose injection and stored in glass bottles.     

Stability of cefazolin sodium in various artificial tear solutions and aqueous vehicles

The stability of cefazolin sodium reconstituted in four artificial tear solutions, two acetate buffer solutions, phosphate buffer solution, and 0.9% sodium chloride injection was studied. Cefazolin was reconstituted in Tearisol, Isopto Tears, Liquifilm Forte, and Liquifilm Tears; acetate buffer solution at pH 4.5 and pH 5.7; phosphate buffer solution at pH 7.5; and 0.9% sodium chloride injection. The solutions were stored at 4 degrees C, 25 degrees C, and 35 degrees C for seven days. All of the solutions were inspected for particulates, turbidity, color, and odor. Five assay determinations on each of three samples of each formulation were performed using a stability-indicating high-performance liquid chromatographic assay. Cefazolin stability was influenced primarily by pH and storage temperature. Reconstitution of cefazolin sodium in the alkaline tear solutions Isopto Tears and Tearisol and in phosphate buffer solution resulted in particulate and color formation at 25 degrees C and 35 degrees C. Turbidity was noted after cefazolin sodium was reconstituted in Isopto Tears. No color or precipitate formation was evident after seven days at 25 degrees C and 35 degrees C in the formulations of acidic pH containing Liquifilm Tears, Liquifilm Forte, 0.9% sodium chloride injection or acetate buffer solution as the vehicles. The extent of degradation of cefazolin was substantially higher in the formulations of alkaline pH than in those of acidic pH at 35 degrees C and 25 degrees C. All of the formulations retained more than 90% of their initial concentration when stored at 4 degrees C. Cefazolin sodium, when reconstituted in artificial tear solutions with an acidic pH, is stable for up to three days at room temperature.     

Stability of phenylephrine hydrochloride injection in polypropylene syringes.

PURPOSE: The stability of extemporaneously prepared phenylephrine hydrochloride injection stored in polypropylene syringes was studied. METHODS: Dilution of phenylephrine hydrochloride to a nominal concentration of 100 mug/mL was performed under aseptic conditions by adding 100 mg of phenylephrine hydrochloride (total of 10 mL from two 5-mL 10-mg/mL vials) to 1000 mL of 0.9% sodium chloride injection. The resulting solution was drawn into 10-mL polypropylene syringes and sealed with syringe caps. The syringes were then frozen (-20 degrees C), refrigerated (3-5 degrees C), or kept at room temperature (23-25 degrees C). Four samples of each preparation were analyzed on days 0, 7, 15, 21, and 30. Physical stability was assessed by visual examination. The pH of each syringe was also measured at each time point. Sterility of the samples was not assessed. Chemical stability of phenylephrine hydrochloride was evaluated using high-performance liquid chromatography. To demonstrate the stability-indicating nature of the assay, forced degradation of phenylephrine was conducted. Samples were considered stable if there was less than 10% degradation of the initial concentration. RESULTS: Phenylephrine hydrochloride diluted to 100 microg/mL with 0.9% sodium chloride injection was physically stable throughout the study. No precipitation was observed. Minimal to no degradation was observed over the 30-day study period. CONCLUSION: Phenylephrine hydrochloride diluted to a concentration of 100 mug/mL in 0.9% sodium chloride injection was stable for at least 30 days when stored in polypropylene syringes at -20 degrees C, 3-5 degrees C, and 23-25 degrees C.     

Stability of ganciclovir sodium in 5% dextrose injection and in 0.9% sodium chloride injection over 35 days.

The stability of ganciclovir 1 and 5 mg/mL in 5% dextrose injection and in 0.9% sodium chloride injection was studied at 25 degrees C and 5 degrees C over 35 days. Ganciclovir (as the sodium salt) was added to 120 polyvinyl chloride bags containing either 5% dextrose injection or 0.9% sodium chloride injection to attain ganciclovir concentrations of 1 and 5 mg/mL. Thirty bags were prepared for each combination of drug concentration and i.v. solution. Half of the bags in each group were stored at 25 degrees C; the other half were stored at 5 degrees C. Samples withdrawn from all 120 bags immediately after preparation were frozen for later determination of initial concentration. At 7, 14, 21, 28, and 35 days after preparation, approximately 5-mL samples representing each test condition were withdrawn for analysis. The samples were visually examined, tested for pH, and assayed by high-performance liquid chromatography. There was no significant loss of ganciclovir under any of the study conditions over 35 days. All solutions were clear throughout the study period. The pH decreased slightly in both diluents at both ganciclovir concentrations but did not deviate from the manufacturer's range (9-11). Admixtures containing ganciclovir 1 and 5 mg/mL (as the sodium salt) in 5% dextrose injection and 0.9% sodium chloride injection were stable in polyvinyl chloride bags stored at 25 degrees C and 5 degrees C for 35 days.     

Stability of levodopa in 5% dextrose injection at pH 5 or 6

The stability of solutions of levodopa 1 mg/mL in 5% dextrose injection adjusted to pH 5 or 6 and stored at one of three temperatures was determined. Solutions were adjusted to pH 5 or 6 with sodium acetate injection or sodium phosphate injection, respectively. Three samples of solution adjusted to pH 5 were stored at each of three temperatures (4, 25, and 45 degrees C), and three samples of solution adjusted to pH 6 were stored at 25 degrees C. Samples were assayed for levodopa concentration by high-performance liquid chromatography at various times during the 21-day study period. All solutions maintained at least 90% of the initial concentration of levodopa for seven days. Discoloration of all solutions except those stored at 4 degrees C was noted at some point during the study period; solutions stored at 45 degrees C began to darken within 12 hours. The pH values of the solutions did not change during the study period. Under the conditions studied, solutions of levodopa 1 mg/mL in 5% dextrose injection adjusted to pH 5 or 6 are stable for seven days. Slight degradation of levodopa may cause a brownish-black discoloration of the admixtures.     

Stability of morphine sulfate in Cormed III (Kalex) intravenous bags

The stability of various concentrations of morphine sulfate solution stored in Cormed III (Kalex) i.v. bags at two temperatures was investigated. Solutions of morphine sulfate 0.5, 15, 30, and 60 mg/mL were prepared under a horizontal-laminar-airflow hood with 0.9% sodium chloride solution and placed into 100-mL Kalex bags. Two bags were prepared for each concentration; one was stored at 5 degrees C and the other at 37 degrees C. Samples were analyzed in triplicate by high-performance liquid chromatography on days 0, 2, 5, 9, and 14. All morphine sulfate solutions were stable for 14 days at 37 degrees C, and the 0.5-, 15-, and 30-mg/mL solutions were stable for 14 days at 5 degrees C. However, the 60-mg/mL solution stored at 5 degrees C was found to contain 57% of the actual initial concentration on day 9 and 51% on day 14; the decrease coincided with the appearance of a white precipitate. Beginning on day 5, all the solutions displayed a light brown color that darkened as the study proceeded. This qualitative change was not associated with any change in morphine concentration. Solutions of morphine sulfate 0.5 to 60 mg/mL stored at 5 or 37 degrees C were stable for 14 days in Kalex bags, except for 60-mg/mL solutions stored at 5 degrees C for nine days or longer.     

Stability of codeine phosphate in an extemporaneously compounded syrup.

PURPOSE: The stability of codeine phosphate in an extemporaneously compounded syrup is described. METHODS: Codeine phosphate 3-mg/mL syrup was prepared using commercially available Codeine Phosphate, USP, Sterile Water for Irrigation, USP, and Ora-Sweet syrup vehicle. Samples were stored in amber polyethylene terephthalate bottles with child-resistant caps. A second batch of codeine phosphate 3-mg/mL syrup was prepared and drawn into amber polyethylene oral syringes with silicon elastomer tips. All samples were stored at room temperature and in the dark. Samples were analyzed immediately and at 7, 14, 28, 42, 56, 70, and 98 days. Codeine phosphate concentrations were measured using a modified stability-indicating high-performance liquid chromatographic method. At each test interval, the density of the syrup was determined gravimetrically using a 10-mL amber oral syringe. Excessive degradation was defined as a greater than 7% loss of the initial concentration. RESULTS: The stock internal standard was stable for at least 98 days at room temperature. The compounded syrup retained more than 93% of the initial codeine phosphate concentration for at least 98 days at 22-25 degrees C. No changes in color, clarity, or odor and no visible solids or microbial growth were observed in any sample. The pH of the syrup was initially 4.2 and remained unchanged throughout the study. CONCLUSION: Codeine phosphate 3 mg/mL in Ora-Sweet syrup vehicle was stable in both amber polyethylene terephthalate bottles and amber polyethylene oral syringes for at least 98 days when stored at 22-25 degrees C and protected from light.