Development and characterization of itraconazole-loaded solid lipid nanoparticles for ocular delivery

Abstract

The purpose of this study was to investigate the feasibility of entrapping water-insoluble drug itraconazole into solid lipid nanoparticles (SLNs) for topical ocular delivery. The drug-loaded SLNs were prepared from stearic acid and palmitic acid using different concentrations of polyvinyl alcohol employed as emulsifier. SLNs were prepared by the melt-emulsion sonication and low temperature-solidification method and characterized for particle size, zeta potential, drug loading and drug entrapment efficiency. The mean particle size of SLNs prepared with stearic acid ranged from 139 to 199?nm, while the SLNs prepared with palmitic acid had particle size in the range of 126–160?nm. The SLNs were spherical in shape. Stearic acid-SLNs showed higher entrapment of drug compared with palmitic acid-SLNs. Differential scanning calorimetry (DSC) and X-ray diffraction measurements showed decrease in crystallinity of drug in the SLN formulations. The modified Franz-diffusion cell and freshly excised goat corneas were used to test drug corneal permeability. Permeation of itraconazole from stearic acid-SLNs was higher than that obtained with palmitic acid-SLNs. The SLNs showed clear zone of inhibition against Aspergillus flavus indicating antimicrobial efficacy of formulations.     

Influence of various lipid core on characteristics of SLNs designed for topical delivery of fluconazole against cutaneous candidiasis

Dermal delivery of fluconazole (FLZ) is still a major limitation due to problems relating to control drug release and achieving therapeutic efficacy. Recently, solid lipid nanoparticles (SLNs) were explored for their potential of topical delivery, possible skin compartments targeting and controlled release in the skin strata. The retention and accumulation of drug in skin is affected by composition of SLNs. Hence, the aim of this study was to develop FLZ nanoparticles consisted of various lipid cores in order to optimize the drug retention in skin. SLNs were prepared by solvent diffusion method and characterized for various in vitro and in vivo parameters. The results indicate that the SLNs composed of compritol 888 ATO (CA) have highest drug encapsulation efficiency (75.7?±?4.94%) with lower particle size (178.9?±?3.8?nm). The in vitro release and skin permeation data suggest that drug release followed sustained fashion over 24?h. The antifungal activity shows that SLNs made up of CA lipid could noticeably improve the dermal localization. In conclusion, CA lipid based SLNs are represents a promising carrier means for the topical treatment of skin fungal infection as an alternative to the systemic delivery of FLZ.     

Testosterone solid lipid microparticles for transdermal drug delivery. Formulation and physicochemical characterization

Purpose: The main objective of the study was to formulate and characterize testosterone (TS) solid lipid microparticles (SLM) to be applied as a transdermal delivery system.

Methods: Testosterone SLMs were formulated using an emulsion melt homogenization method. Various types and concentrations of fatty materials, namely glyceryl monostearate (GM), glyceryl distearate (GD), stearic acid (SA) and glyceryl behanate (GB) were used. The formulations contained 2.5 or 5?mg TS?g^?1. Morphology, particle size, entrapment efficiency (EE), rheological properties and thermal behaviour of the prepared SLM were examined. In vitro release characteristics of TS from various prepared SLM were also evaluated over 24?h using a vertical Franz diffusion cell. In addition, the effect of storage and freeze-drying on particle size and release pattern of TS from the selected formulation was evaluated.

Results: The results indicated that the type of lipid affected the morphology and particle size of SLM. A relatively high drug percentage entrapment efficiency ranging from 80.7–95.7% was obtained. Rheological studies showed plastic flow characteristics of the prepared formulations. DSC examination revealed that TS existed in amorphous form in the prepared SLM. Release studies revealed the following rank order of TS permeation through cellophane membrane after application of various formulations: 5% GM?<?5% GD?<?5% SA?<?5% GB?<?2.5% GM?<?2.5% SA?<?10% GD?<?10% GB. The drug permeation through excised abdomen rat skin after application of 10% GB–2.5?mg TS?g^?1 SLM was lower than that permeated through cellophane membrane. Moreover, SLM containing 10% GB–2.5?mg TS?g^?1 stored at 5°C showed good stability as indicated by the release study and particle size analysis. Trehalose showed high potential as a cryoprotectant during freeze drying of the selected SLM formulation.

Conclusions: The developed TS SLM delivery system seemed to be promising as a TS transdermal delivery system.     

Topical ketoprofen nanogel: artificial neural network optimization,clustered bootstrap validation,and in vivo activity evaluation based on longitudinal dose response modeling

Objectives: This work aimed at investigating the potential of solid lipid nanoparticles (SLN) as carriers for topical delivery of Ketoprofen (KP); evaluating a novel technique incorporating Artificial Neural Network (ANN) and clustered bootstrap for optimization of KP-loaded SLN (KP-SLN); and demonstrating a longitudinal dose response (LDR) modeling-based approach to compare the activity of topical non-steroidal anti-inflammatory drug formulations.

Methods: KP-SLN was fabricated by a modified emulsion/solvent evaporation method. Box–Behnken design was implemented to study the influence of glycerylpalmitostearate-to-KP ratio, Tween 80, and lecithin concentrations on particle size, entrapment efficiency, and amount of drug permeated through rat skin in 24?hours. Following clustered bootstrap ANN optimization, the optimized KP-SLN was incorporated into an aqueous gel and evaluated for rheology, in vitro release, permeability, skin irritation and in vivo activity using carrageenan-induced rat paw edema model and LDR mathematical model to analyze the time course of anti-inflammatory effect at various application durations.

Results: Lipid-to-drug ratio of 7.85 [bootstrap 95%CI: 7.63–8.51], Tween 80 of 1.27% [bootstrap 95%CI: 0.601–2.40%], and Lecithin of 0.263% [bootstrap 95%CI: 0.263–0.328%] were predicted to produce optimal characteristics. Compared with profenid® gel, the optimized KP-SLN gel exhibited slower release, faster permeability, better texture properties, greater efficacy, and similar potency.

Conclusions: SLNs are safe and effective permeation enhancers. ANN coupled with clustered bootstrap is a useful method for finding optimal solutions and estimating uncertainty associated with them. LDR models allow mechanistic understanding of comparative in vivo performances of different topical formulations, and help design efficient dermatological bioequivalence assessment methods.     

Development of solid dispersion lipid nanoparticles for improving skin delivery

Applications of poorly water-soluble drugs in skin delivery pose several challenges to pharmaceutical formulation. This research originally developed solid lipid nanoparticles (SLNs) packaging a modified core of a solid dispersion (SD) in the lipid matrix to modulate the skin release patterns. Curcumin (CUR) was selected as the poorly water-soluble drug applied in the formulation. The designed system, so-called solid dispersion lipid nanoparticles (SD-SLNs), was fabricated by incorporating a solidifying SD or a non-solidifying SD into the core of the SLNs by ultrasonication. Release studies illustrated an important enhancement in the drug release of the proposed system compared to pure CUR and SLN formulations without the presence of SD as the modified core, which indicated the positive effect of the combined colloidal method of SD and SLNs. The physicochemical properties of the SD-SLN systems were also elucidated using powder X-ray diffraction, Fourier transform infrared spectroscopy, and particle size analysis. The drug was found to change to an amorphous state without any molecular interactions along with a marked particle size reduction. This work demonstrated the strong potential of applying a novel SD-SLN system for the skin delivery of a drug with poor water solubility.     

Skin permeation of buprenorphine and its ester prodrugs from lipid nanoparticles: lipid emulsion,nanostructured lipid carriers and solid lipid nanoparticles

The aim of this study was to develop and characterize lipid nanoparticle systems for the transdermal delivery of buprenorphine and its prodrugs. A panel of three buprenorphine prodrugs with ester chains of various lengths was synthesized and characterized by solubility, capacity factor (log K′), partitioning between lipids and water and the ability to penetrate nude mouse skin. Colloidal systems made of squalene (lipid emulsion, LE), squalene + Precirol (nanostructured lipid carriers, NLC) and Precirol (solid lipid nanoparticles, SLN) as the lipid core material were prepared. Differential scanning calorimetry showed that the SLN had a more-ordered crystalline lattice in the inner matrix compared to the NLC. The particle size ranged from 220–300 nm, with NLC showing the smallest size. All prodrugs were highly lipophilic and chemically stable, but enzymatically unstable in skin homogenate and plasma. The in vitro permeation results exhibited a lower skin delivery of drug/prodrug with an increase in the alkyl chain length. SLN produced the highest drug/prodrug permeation, followed by the NLC and LE. A small inter-subject variation was also observed with SLN carriers. SLN with soybean phosphatidylcholine (SLN-PC) as the lipophilic emulsifier showed a higher drug/prodrug delivery across the skin compared to SLN with Myverol, a palmitinic acid monoglyceride. The in vitro permeation of the prodrugs occurred in a sustained manner for SLN-PC. The skin permeation of buprenorphine could be adjusted within a wide range by combining a prodrug strategy and lipid nanoparticles.     

Formulation,characterisation and in vivo evaluation of lipid-based nanocarrier for topical delivery of diflunisal

Diflunisal (DIF) is non-steroidal anti-inflammatory drug used in the treatment of rheumatoid arthritis, osteoarthritis. The current engrossment was aimed at formulation and assessment of DIF-loaded solid lipid nanoparticles (SLNs) for topical/dermal application. SLNs formulated by hot homogenisation method based on microemulsification technique were spherical with a mean size of 124.0?±?2.07?nm; PDI 0.294?±?0.15. The cumulative amount permeated/area was 109.99?±?0.008?μg/cm², along with permeation flux (6.30?±?0.09?μg/cm²/h) and skin retention (11.74?±?0.155?μg/cm²) across mice skin. The SLNs of DIF showed significant decrease in fluid volume, granuloma tissue weight, leukocyte count/mm³ after application of SLN formulation in mice air pouch model. Similarly, in mice ear oedema and rat paw oedema model, there was 2.30 and 1.29 time increase in percentage inhibition of oedema after SLN formulation application, respectively, as compared with conventional cream. Hence, the SLNs of DIF may prove to be a potential nanocarrier to effectively treat the local inflammatory conditions associated with arthritis.     

Solid lipid nanoparticles (SLN) as carriers for the topical delivery of econazole nitrate: in-vitro characterization, ex-vivo and in-vivo studies

Solid lipid nanoparticles (SLN) designed for topical administration of econazole nitrate (ECN), were prepared by o/w high-shear homogenization method using different ratios of lipid and drug (5:1 and 10:1). SLN were characterized in terms of particle size, morphology, encapsulation efficiency and crystalline structure. After incorporation of SLN into hydrogels, rheological measurements were performed, and ex-vivo drug permeation tests were carried out using porcine stratum corneum (SC). In-vivo study of percutaneous absorption of ECN as a function of application time and composition of gels was carried out by tape-stripping technique. Penetration tests of the drug from a conventional gel were performed as comparison. High-shear homogenization method resulted in a good technique for preparation of ECN-loaded SLN. Particles had a mean diameter of about 150 nm and a regular shape and smooth surface. The encapsulation efficiency values were about 100%. Ex-vivo tests showed that SLN were able to control the drug release through the SC; the release rate depended upon the lipid content on the nanoparticles. In-vivo studies demonstrated that SLN promoted a rapid penetration of ECN through the SC after 1 h and improved the diffusion of the drug in the deeper skin layers after 3 h of application compared with the reference gel.     

Modeling the effect of sonication parameters on size and dispersion temperature of solid lipid nanoparticles (SLNs) by response surface methodology (RSM)

Abstract

The objective of this study was to evaluate the effect of sonication time and pulse frequency on average dispersion temperature (ART), particle size and zeta potential of solid lipid nanoparticles (SLNs). A two-factor, three-level response surface methodology (RSM) was used to optimize sonication time between 5 and 15?min and pulse frequency from 30 to 90%. SLNs made from stearyl alcohol (SA) and cetyl trimethylammonium bromide (CTAB) blend at 1:3 ratio were prepared by applying high-shear homogenization and sonication. Pulse frequency and time were found to have a significant effect on particle size and ART. The effect of sonication parameters on zeta potential, however, was insignificant. The optimal sonication parameters for preparing 100?nm SLNs made from a SA/CTAB blend was 60% pulse frequency at 40% power for 10?min. Optimized sonication parameters were then used to investigate the effect of lipid type on SLN size and zeta potential. The mean particle sizes of SLNs made with SA, cetyl palmitate, Precirol®, Dynasan118® and Compritol® were 98, 190, 350, 350 and 280?nm, respectively. In conclusion, pulse frequency and time were found to be critical for obtaining SLNs with desirable size, whereas the stability of the SLNs was dependent on their lipid content.     

卡莫氟固体脂质纳米粒的制备及工艺研究

目的:制备卡莫氟固体脂质纳米粒并考察其药剂性质。方法:采用高压均质法制备卡莫氟固体脂质纳米粒混悬液,以单因素考察和正交设计法筛选处方和工艺,并考察其形态、粒径、载药量及包封率。结果:优选出的较佳处方大豆卵磷脂、泊洛沙姆188、吐温-80和硬脂酸用量分别为8.0、12.0、1.0、7.5mg·mL-1;所制得的固体脂质纳米粒为圆整的实体粒子,表面光滑,平均粒径为78.7nm,载药量为23.47%,包封率为82.33%。结论:高压均质法可用于卡莫氟类脂溶性药物固体脂质纳米粒的制备。     

Solid lipid nanoparticles-loaded topical gel containing combination drugs: an approach to offset psoriasis

Aim: The primary aim of present work was to develop effective combination drug therapy for topical treatment of psoriasis.

Methods: Betamethasone dipropionate and calcipotriol loaded solid lipid nanoparticles (CT-BD-SLNs) were prepared by hot melt high shear homogenization technique, which were then incorporated in Carbopol gel matrix. The anti-psoriatic potential was tested by sequential in vitro (skin permeation and dermal distribution, anti-proliferative effect in HaCaT cells) and in vivo (Draize patch irritation, transepidermal water loss (TEWL) and anti-psoriatic mouse tail studies) experiments.

Results: A negligible amount in receptor compartment, yet confined distribution of drugs to epidermal and dermal region of skin was observed in case of SLNs, which is essential for safe and effective anti-psoriatic therapy. Draize patch test and TEWL demonstrated negligible skin irritation and better skin tolerability of SLNs. The in vitro HaCaT cell line study demonstrated that SLNs delayed the abrupt growth of keratinocytes, while in vivo mouse tail model showed that SLNs gel significantly decreased the epidermal thickness and increased melanocyte count in comparison to commercial Daivobet® ointment.

Conclusions: The developed SLNs gel is expected to be potential strategies for treatment of psoriasis and other topical diseases.     

Preparation and characterization of nocodazole-loaded solid lipid nanoparticles

Abstract

Nocodazole (NCD) has more carcinogenic effect than similar drugs. Moreover, it has low drug release time and high particle size. Solid Lipid Nanoparticles (SLNs) have been evaluated for decrease in particle size and therefore increase in drug release time, for such drugs. In this study, NCD has been successfully incorporated into SLNs systems and remained stable for a period of 90 days. NCD structure related to the chemical nature of solid lipid is a key factor to decide whether anticarcinogenic agent will be incorporated in the long term and for a controlled optimization of active ingredient incorporation and loading, intensive characterization of the physical state of the lipid particles were highly essential. Thus, NMR, FT-IR, DSC (for thermal behavior) analyses were performed and the results did not indicate any problem on stability. Moreover, SLNs were decreased size of NCD in addition to increase in time of the drug release. After SLN preparation, particle size, polydispersity index, electrical conductivity and zeta potential were measured and drug release from NCD-loaded SLNs were performed. These values seem to be of the desired range.     

Dermal delivery of doxorubicin-loaded solid lipid nanoparticles for the treatment of skin cancer

Objective: Dermal delivery of Doxorubicin (Dox) would be an ideal way in maximising drug efficiency against skin cancer accompanying with minimising side effects. We investigated the potential of Dox-loaded Solid lipid nanoparticles (SLNs) for topical delivery against skin cancer.

Methods: In vitro and in vivo cytotoxicity of optimised formulation were evaluated on murine melanoma (B16F10) cells by MTT assay and melanoma induced Balb/C mice, respectively. Animal study followed by histological analysis.

Results: Optimised formulation showed mean particle size and encapsulation efficiency (EE) of 92?nm and 86% w/w (0.86% w/w value of encapsulated Dox in the lipid matrix), respectively. FTIR experiment confirmed drug–lipid interaction interpreting the observed high EE value for Dox. In vitro and in vivo results indicated the superiority of cytotoxic performance of Dox-loaded SLN compared to Dox solution.

Conclusion: Our findings may open the possibilities for the topical delivery of Dox to the skin cancerous tissues.     

Galactosylated solid lipid nanoparticles with cucurbitacin B improves the liver targetability

This study intended to prepare liver-targeting solid lipid nanoparticles (SLNs) with a hepatoprotective drug, cucurbitacin B (Cuc B), using a galactosylated lipid, N-hexadecyl lactobionamide (N-HLBA). The galactosyl-lipid N-HLBA was prepared via the lactone form intermediates of lactobionic acid and synthesized by anchoring galactose to hexadecylamine lipid. The Cuc B-loaded galactosylated and conventional SLNs were successfully prepared by a high-pressure homogenization method. The two SLNs showed similar physical and pharmaceutical properties, including: the particle size measured by laser diffraction was 135?nm for galactosylated SLN (GalSLN) and 123?nm for conventional SLNs (CSLN); zeta potentials were ?31.6 mV (GalSLN) and ?34.3 mV(CSLN); in vitro release behavior of the two SLNs was similar, and both showed the biphasic drug release pattern with burst release at the initial stage and prolonged release afterwards. In contrast, the two SLNs demonstrated a marked difference in in vitro cellular cytotoxicity and in vivo tissue distribution performances. The IC₅₀ values of Cuc B in the two SLNs were by far lower than those of Cuc B solution and further Cuc B-GalSLN had about half the IC₅₀ value of Cuc B-CSLN. These results indicated that the encapsulation of Cuc B in SLNs resulted in the enhancement of cytotoxic activity, and galactosyl ligand could further enhance the cellular accumulation and cytotoxicity of Cuc B. The weighted-average overall drug targeting efficiency (Te) was used to evaluate the liver targetability. Cuc B-GalSLN gave a relatively high (Te)_liver value of 63.6%, ～ 2.5-times greater than that of Cuc B-CSLN (25.3%) and Cuc B solution (23.8%). In summary, the incorporation of N-HLBA into SLNs significantly enhanced the liver targetability of Cuc B-loaded SLNs and GalSLN had a great potential as a drug delivery carrier for improved liver targetability.     

Vincristine and temozolomide combined chemotherapy for the treatment of glioma: a comparison of solid lipid nanoparticles and nanostructured lipid carriers for dual drugs delivery

Context: Glioma is a common malignant brain tumor originating in the central nervous system. Efficient delivery of therapeutic agents to the cells and tissues is a difficult challenge. Co-delivery of anticancer drugs into the cancer cells or tissues by multifunctional nanocarriers may provide a new paradigm in cancer treatment.

Objective: In this study, solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) were constructed for co-delivery of vincristine (VCR) and temozolomide (TMZ) to develop the synergetic therapeutic action of the two drugs. The antitumor effects of these two systems were compared to provide a better choice for gliomatosis cerebri treatment.

Methods: VCR- and TMZ-loaded SLNs (VT-SLNs) and NLCs (VT-NLCs) were formulated. Their particle size, zeta potential, drug encapsulation efficiency (EE) and drug loading capacity were evaluated. The single TMZ-loaded SLNs and NLCs were also prepared as contrast. Anti-tumor efficacies of the two kinds of carriers were evaluated on U87 malignant glioma cells and mice bearing malignant glioma model.

Results: Significantly better glioma inhibition was observed on NLCs formulations than SLNs, and dual drugs displayed the highest antitumor efficacy in vivo and in vitro than all the other formulations used.

Conclusion: VT-NLCs can deliver VCR and TMZ into U87MG cells more efficiently, and inhibition efficacy is higher than VT-SLNs. This dual drugs-loaded NLCs could be an outstanding drug delivery system to achieve excellent therapeutic efficiency for the treatment of malignant gliomatosis cerebri.     

Preparation,characterization, and evaluation of gatifloxacin loaded solid lipid nanoparticles as colloidal ocular drug delivery system

This article describes the preparation and characterization of solid lipid nanoparticles (SLNs) prepared with stearic acid (SLN-A) and a mixture of stearic acid and Compritol (SLN-B) as lipid matrix and poloxamer-188 as surfactant, using sodium taurocholate and ethanol as co-surfactant mixture, with a view to applying the SLN in topical ocular drug delivery. The SLNs were prepared by o/w microemulsion technique and characterized by time-resolved particle size analysis, polydispersity index, zeta(ζ )-potential, differential scanning calorimetry (DSC), IR-spectroscopy, and wide-angle X-ray diffractometry (WAXD). The results obtained in these studies were compared with SLN prepared with stearic acid alone. IR, WAXD, and DSC studies revealed low-crystalline SLN and were having positive ζ -potentials after three-months of storage. Results indicated mixed lipid-matrix produced SLN with low-crystallinity and smaller particle sizes and higher drug entrapment compared with SLN prepared with stearic acid alone, therefore SLN-B would be suitable for the preparation of nanosuspension. Nanosuspensions were subjected to rheological and physicochemical evaluation, in vitro drug release and ex vivo corneal permeation studies and their effect were evaluated on corneal hydration-level. SLN composed of stearic acid and compritol would prove to be a good ocular drug delivery system considering the smaller particle size, particle size stability, and physiologically tolerable components.     

Solid lipid microparticles: formulation,preparation, characterisation,drug release and applications

This review details the properties of solid lipid microparticles (SLMs): a promising drug carrier system that has been until now rather unexploited. First, the advantages of SLMs compared with other drug carrier systems are listed. Then an overview of SLM manufacturing compounds and techniques is presented. A detailed discussion of the characteristics of SLMs follows, and includes the determination of particle size distribution, the determination of SLM morphology, the solid-state analysis, the determination of SLM drug loading and the factors influencing it. The invitro drug release studies that have been carried out so far and the parameters affecting them are also described. Some preliminary invivo aspects (invivo drug release studies, b-iocompatibility studies and invivo fate) are also considered.     

Development of thermodynamically stable nanostructured lipid carrier system using central composite design for zero order permeation of Econazole nitrate through epidermis

The investigation was aimed at developing thermodynamically stable topical delivery system of nanostructured lipid carrier of econazole nitrate (EN) for the treatment of deep seated fungal infection by improving its permeability. Fifteen formulations (F1–F15) of nanostructured lipid carriers (NLCs) were prepared by solvent injection technique using central composite design and characterized for particle size and % entrapment efficiency. Closeness in the results, guided the selection of five NLC formulations which were formulated as hydrogels (G1–G5) using Carbopol 934. The permeation studies of gels demonstrated G3 with flux rate of 3.21?±?0.03 µg/cm²/min (> target flux of 1.46 µg/cm²/min) as the best formulation that exhibited zero order permeation. The amount of drug/unit area demonstrated linear dependency on flux rate. Confocal laser scanning microscopy demonstrated penetration of rhodamine red till the stratum basale due to hydration of stratum corneum. Hydrogel G3 containing NLC formulation (F5) was selected as the optimized topical gel. TEM of F5 revealed spherical particles that presented low recrystallization index of 72.35%. Stability profile for 90 days revealed insignificant change (p?<?0.05) in the particle size and zeta potential indicating substantial stability of the system. Thus, EN-loaded NLC indicated better permeability and thermodynamic stability as effective topical delivery system for deep seated fungal infection.     

Nanostructured lipid carriers,solid lipid nanoparticles,and polymeric nanoparticles: which kind of drug delivery system is better for glioblastoma chemotherapy?

Context: Glioblastoma is a malignant brain tumor originating in the central nervous system. Successfully therapy of this disease required the efficient delivery of therapeutic agents to the tumor cells and tissues. Delivery of anticancer drugs using novel nanocarriers is promising in glioma treatment.

Objective: Polymeric nanoparticles (PNPs), solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs) were constructed for the delivery of temozolomide (TMZ). The anti-tumor effects of the three kinds of nanocarriers were compared to provide the optimum choice for gliomatosis cerebri treatment.

Methods: TMZ-loaded PNPs (T-PNPs), SLNs (T-SLNs), and NLCs (T-NLCs) were formulated. Their particle size, zeta potential, drug encapsulation efficiency (EE), and drug loading (DL) capacity were evaluated. Anti-tumor efficacies of the three kinds of nanocarriers were evaluated on U87 malignant glioma cells (U87?MG cells) and mice-bearing malignant glioma model.

Results: T-NLCs displayed the best anti-tumor activity than other formulations in vivo and in vitro. The most significantly glioma inhibition was observed on NLCs formulations than PNPs and SLNs.

Conclusion: This work demonstrates that NLCs can deliver TMZ into U87MG cells more efficiently, with higher inhibition efficacy than PNPs and SLNs. T-NLCs could be an excellent drug delivery system for glioblastoma chemotherapy.     

雷公藤内酯醇固体脂质纳米粒的制备及理化性质

目的：以聚乙二醇单硬脂酸酯表面修饰材料结合到固体脂质纳米粒（solid lipid nanoparticles,SLN）,以雷公藤内酯醇（triptolide,TPL）为模型药,制备一种具有良好亲水亲脂性的雷公藤内酯醇固体脂质纳米粒。方法：采用熔融-乳化法制备固体脂质纳米粒。通过单因素考察、中心复合设计（central composite design,CCD）,考察脂质材料、聚山梨醇酯-80和PEG-stearate（PEG-SA）三个因素对TPL-SLN粒径、包封率和载药量的影响。通过透射电镜、热分析和X-射线衍射考察TPL-SLN的理化性质,并考察其固体脂质纳米粒的稳定性以及体外释放情况。用MTT法测定其对人正常肝L02细胞和肝癌细胞HepG2的增殖抑制作用并计算其IC₅₀。结果：最优的处方：脂质材料为7.5%,聚山梨醇酯80（Tween 80）为2%和PEG-SA为2%,其粒径（193.43±6.07）nm,包封率（87.63±0.09）%,载药量（0.33±0.01）%。透射电镜观察所制备的纳米粒的形态近似于球形,DSC分析和X-射线衍射证实TPL以非晶型的形式存在于固体脂质纳米粒中。稳定性考察发现纳米粒粒径在一个月的贮存期基本没有变化（P>0.05）,体外释放表明TPL-SLN具有体外缓释特性。TPL-SLN对肿瘤细胞的抑制作用强于正常肝细胞。结论：雷公藤内酯醇聚乙二醇修饰固体脂质纳米粒有望开发为临床口服用药新剂型。