Condylar movement analysis in subjects with clinically normal temporomandibular joints,utilizing an amorphous sensor

The purpose of this study was to determine the range of condylar movements in normal subjects, by the use of an amorphous sensor. The pair-matched sample consisted of 17 Caucasian males (aged 25.8 +/- 2.5 years) and 17 Caucasian females (aged 25.5 +/- 2.8 years) who had no subjective or objective symptoms related to temporomandibular joint (TMJ) sounds. Bilateral condylar and jaw movements were recorded simultaneously. The results showed that the typical condylar movement points plotted on the X-Y coordinates indicated a uniform or approximately straight line, that is X = Y. The mean +/- standard deviation (s.d.) for the maximum velocity of condylar movement during the opening and closing phases was 32.6 +/- 16.9 and 39.8 +/- 21.5 mm s-1, respectively. The mean +/- s.d. for the degree of jaw opening at the turning point of condylar movement was 36.9 +/- 21.7%. Significant correlations existed between any two measurements of maximum velocity of condylar movement. Moreover, significant correlations existed between the left and right sides in the degree of jaw opening at the turning point of condylar movement. These results suggest that a range of normal values of condylar movements can be developed when utilizing the amorphous sensor method.     

Frequency spectrum of condylar movement in clinically normal subjects, using an amorphous sensor

The purpose of this study was to determine the properties of the frequency spectrum produced by condylar movements in normal subjects, by the use of an amorphous sensor. The gender-matched sample consisted of white people (17 males and 17 females, aged 25.8 +/- 2.5 and 25.5 +/- 2.8 years, respectively) who had no subjective or objective symptoms related to temporomandibular joint sounds. Bilateral condylar and jaw movements were recorded simultaneously. The results showed that the mean +/- standard deviation (s.d.) for the mean frequency of condylar movement during the opening and closing phases was 45.0 +/- 5.2 and 47.0 +/- 3.5 Hz, respectively. The mean +/- s.d. for the peak frequency of condylar movement during the opening and closing phases was 46.6 +/- 8.0 and 49.7 +/- 4.5 Hz, respectively. Significant correlations existed between the left and right sides in the mean frequency as well as the peak frequency during the opening phase. However, there were no significant correlations between the left and right sides in the mean frequency or the peak frequency during the closing phase. These results suggest that the frequency spectrum of normal condylar movement can be obtained when using the amorphous sensor.     

髁突运动中心大张口轨迹与关节窝形态的关系及临床应用探讨

目的　探讨髁突运动中心大张口轨迹与关节窝形态的关系 ,对TMD患者髁突运动中心轨迹特征进行初步研究。方法　利用自行开发的髁突运动中心轨迹显示分析系统 ,分别以运动中心、终末绞链轴点作为参考点 ,观察 10名健康人和 7例临床检查怀疑盘前移位的TMD患者大张口轨迹 ,与磁共振成像得到的相应关节窝形态及关节盘位置诊断结果进行比较。结果　健康人左右侧运动中心轨迹与关节窝形态曲线重合率分别为 80 % (8/ 10 )和 90 % (9/ 10 ) ;终末绞链轴点轨迹与关节窝形态重合率均为 0 (0 / 10 )。TMD患者中 ,11侧盘前移位关节 ,除 1侧可复性盘前移位关节外 ,髁突运动中心轨迹均与正常的轨迹明显不同 ,出现各种改变 ;3侧正常盘位关节 ,髁突运动中心轨迹均与健康人的轨迹相似。结论　运动中心轨迹较终末绞链轴点个体稳定 ,可认为是较理想的研究髁突运动轨迹的参考点     

Nonsurgical Treatment of Anterior Disk Displacement Without Reduction of the Temporomandibular Joint: A Case Report on the Relationship between Condylar Rotation and Translation

Farrar reported that in chronic anterior disk displacement without reduction (ADD w/o R) of the temporomandibular joint (TMJ), the range of mandibular movement gradually increases and the condylar movement normal-disk is still displaced anteriorly. The relationship between condylar rotation and translation was studied in opening/closing jaw movements before and after joint stabilization splint therapy in a patient with ADD w/o R. Movements were recorded by means of an optoelectronic jaw tracking system (Metropoly, Jaws-3D) consisting of three cameras that register the position of six light-emitting diodes (LEDs) mounted on two target frames separately attached to the upper and lower jaw. A computer produced plots of the condylar paths in the sagittal, frontal, and horizontal plane, as well as the opening angle against the anterior condylar translation. Results indicated some variations in the relationship between condylar rotation and translation during jaw opening movement. In the joint with ADD w/o R an increase in anterior condylar translation was found and the relationship between rotation and translation became more linear after joint stabilization therapy. This study supported a hypothesis of Farrar's that condylar movement in chronic ADD w/o R is similar to that expected in asymptomatic TMJs.     

联合动态MRI和下颌运动轨迹描记仪分析健康人开闭口时下颌运动轨迹特征

目的：结合动态MRl分析健康人开闭口时下颌运动轨迹特征。方法：18例健康人最大开闭口过程进行动态MRI和下颌运动轨迹描记仪检查，分析髁状突及下颌前牙切点的运动特点及范围。结果：动态MRI显示闭口位关节盘本体部呈双凹形，本体部位于髁状突横嵴的前方（盘分界角〈10。）。健康人下颁前牙切点运动轨迹平滑，双侧运动中心运动轨迹左右对称；运动轴始终保持平行，呈现开闭口初、末时密度比开闭口中时大；运动中心运动距离（13．2±3．1）mm，切点运动距离（41．1±3．8）mm。结论：下颌运动轨迹描记能记录髁状突运动轨迹并且间接反映颞下颌关节的关节盘在开闭口运动中的位置变化情况，为初步建立下颌运动轨迹描记对辅助诊断关节病的参考标准奠定了基础。     

Anatomical location of various condylar points for jaw movement analysis in Japanese women

Summary The aim of this study was to determine anatomical locations of the hinge axis point, kinematic axis point and reference point for the palpated lateral condylar pole on lateral cephalograms. Subjects comprised 18 Japanese women selected according to following criteria: normal occlusion; and absence of signs and symptoms of stomatognathic function. Jaw movement and the condylar reference points noted earlier were recorded three‐dimensionally with six degrees of freedom, and kinematic axis point and hinge axis point were determined using an optoelectronic jaw‐tracking system. Lateral cephalograms were used to determine anatomical locations of the three points in the condyle. Mean location of hinge axis point was 12·9 mm anterior of the porion and 5·3 mm inferior to the Frankfort horizontal plane, the kinematic axis point was situated in 12·8 mm anterior and 0·1 mm inferior, and the reference point for the palpated lateral condylar pole was situated 10·7 mm anterior and 0·8 mm inferior, respectively. The kinematic axis point was located outside the condyle in the majority of subjects. The reference point for the palpated lateral pole offers a useful indicator in the analysis of condylar movements.     

Postero-inferior condylar movement induced by artificial occlusal interference on the balancing side during fictive mastication in rabbits

ObjectiveTooth contact does not occur on the balancing side during mastication. Hence, it is possible that the presence of occlusal interference on the balancing side causes mandibular rotation followed by atypical condylar movement because the jaw-closing muscle activity on the working side is greater than on the balancing side. The aim of the present study was to investigate the relationship between occlusal contact on the balancing side and condylar movement during mastication.MethodsEMG activity of the masseter (MS), lateral pterygoid (LP) and digastric (DG) muscles and jaw movements were recorded. Condylar movements in the sagittal plane were recorded using a high speed charge-coupled device (CCD) camera. Incisal point movements were recorded using a magnet on the mentum and a magnetometric sensor on the nasal bone. A removable biting plate was used to introduce an artificial occlusal interference on the balancing side.ResultsNine of the 10 rabbits showed large postero-inferior condylar movement (Pi-Cm) when a biting plate was applied on the balancing side. Five rabbits showed very small Pi-Cm when a biting plate was applied on the balancing side. In the small Pi-Cm group, MS activity decreased markedly and LP and DG transient activity appeared in the early occlusal phase in the presence of the biting plate.ConclusionInterference on the balancing side always caused Pi-Cm on the ipsilateral side during mastication. However, the degree of Pi-Cm was often decreased by a jaw opening reflex response.     

Relationship between condylar and incisor point displacement during habitual maximum open-close movements

SUMMARY The relationship between condylar movements and incisor point movements during habitual maximum open-close movements were studied in 10 healthy male and 10 healthy female subjects. Jaw movements were recorded by means of an opto-electronic jaw movement recording system, OKAS-3D, capable of recording the six degrees of freedom at a sample frequency of 300 Hz. The lower jaw position of the lateral pole of the condyles was found by means of palpation. In order to analyse the movements, the opening and closing path of the incisor point were divided into ten equal intervals and the corresponding condylar displacement in each interval was calculated. A displacement index was obtained by normalizing the condylar displacement with respect to the maximum condylar displacement. Due to the normalization, the displacement index is not sensitive to possible errors in the location of the lateral condylar point. A clear condylar displacement was already recorded in the first movement interval, right at the start of opening (average displacement index in the first opening interval was significantly greater than zero, P < 0.0005). The condylar displacements in the start and the end interval of opening and closing were smaller than in the intermediate movement intervals ( P < 0.00005).     

Correlation between facial morphology,mouth opening ability,and condylar movement during opening-closing jaw movements in female adults with normal occlusion

The aim of this study was to investigate the relationship between parameters of facial morphology, maximal voluntary mouth opening ability, and condylar movements in 21 adult females, aged between 20 and 24 years. The subjects had a normal occlusion without sign or symptoms of temporomandibular joint (TMJ) dysfunction. Mandibular movements were recorded using an opto-electric jaw movement recording system with six degrees of freedom under a series of maximal mouth opening-closing movements. Maximal jaw opening and coincident condylar movement were measured three-dimensionally. The mean values of the incisor and condylar path were 41.1 +/- 3.5 mm (range 35.6-50.9 mm) and 12.8 +/- 2.8 mm (range 8.1-19.2 mm), respectively. Although the positive correlation between maximal jaw opening and facial morphology was significant, none of the variables significantly differed between the value of the condylar path and facial morphology. The length of the path of maximum incisor movement and the condylar path during mandibular movement also did not correlate. Stepwise multiple regression analysis indicated a positive association between the maximal length of the incisor path and the cephalometric value of mandibular ramus inclination (R2 value was 0.369). The results of this study suggest that facial morphology size has a limited effect on maximal voluntary mandibular opening and condylar movements in normal adult female subjects.     

健康人髁突运动中心前伸和大张口轨迹特征的研究

目的 探讨髁突参考点选择不同对髁突运动轨迹形态的影响。方法 利用自行开发的髁突运动中心轨迹显示分析系统，分别以运动中心，终末绞链轴点作为参考点，研究30名健康人下颌前伸和大张口时髁突运动的矢状面轨迹。结果 运动中心位于终末绞链轴点的前上方，二者轨迹不同。健康人的髁突运动中心大张口迹轨，为一斜向前下方的平滑曲线，形态稳定，没有轨迹异常特征出现且左右侧对称，大张口运动轨迹起止点连线距离与前伸运动轨迹起止点连线距离的比值大于1．5。而终末绞链轴点大张口轨迹左右侧不对称，形态不稳定，会出现不规则形状，大张口运动轨起止点连线距离与前伸运动轨迹起止点连线距离的比值较小。结论 对于同一健康个体，运动中心轨迹较终末绞链轴点轨迹更恒定。     

下颌前突患者下颌支矢状劈开截骨术后髁突运动轨迹的改变

目的:研究双侧下颌支矢状劈开截骨术对下颌前突患者髁突运动轨迹的影响。方法:采用ARCUSdigma下颌三维运动轨迹描记仪,以髁突运动中心为参考点,研究30例正常受试者、14例下颌前突患者手术前后开口、前伸和左右侧向髁突运动的轨迹。用SPSSV11.0统计软件包进行配对t检验和成组t检验。结果:下颌前突患者术前、术后、正常组左侧髁突的运动轨迹与右侧基本相同,左侧髁突与右侧的开口、前伸和侧方运动范围无显著性差异(P>0.05)。术前组与正常组髁突运动轨迹差别较大,术前开口、前伸和侧方运动范围均小于正常组(P<0.05);术后与正常组髁突运动轨迹接近,术后开口、前伸和侧方运动范围与正常组无统计学差异;术前与术后组髁突运动轨迹差别较大,术前开口、前伸和侧方运动范围均显著小于术后组(P<0.05)。结论:下颌前突患者手术后,随着术后正畸治疗及咬合自我调整,建立了正常的咬合引导关系,使下颌功能运动趋向正常。     

Three‐dimensional analysis of jaw kinematic alterations in patients with chronic TMD – disc displacement with reduction

The study investigated whether chronic TMD patients with disc displacement with reduction (DDR), performing non‐assisted maximum jaw movements, presented any changes in their mandibular kinematics with respect to an age‐matched control group. Moreover, it was examined whether jaw kinematics and a valid clinic measure of oro‐facial functional status have significant associations. Maximum mouth opening, mandible protrusion and bilateral laterotrusions were performed by 20 patients (18 women, 2 men; age, 18–34 years) and 20 healthy controls (17 women, 3 men; age, 20–31 years). The three‐dimensional coordinates of their mandibular interincisor and condylar reference points were recorded by means of an optoelectronic motion analyser and were used to quantitatively assess their range of motion, velocity, symmetry and synchrony. Three functional indices (opening–closing, mandibular rototranslation, laterotrusion – right and left – and protrusion) were devised to summarise subject's overall performance, and their correlation with the outcome of a clinical protocol, the oro‐facial myofunctional evaluation with scores (OMES), was investigated. TMD patients were able to reach maximum excursions of jaw movements comparable to healthy subjects’ performances. However, their opening and closing mandibular movements were characterised by remarkable asynchrony of condylar translation. They had also reduced jaw closing velocity and asymmetric laterotrusions. The functional indices proved to well summarise the global condition of jaw kinematics, highlighting the presence of alterations in TMD‐DDR patients, and were linearly correlated with the oro‐facial functional status. The jaw kinematic alterations seem to reflect both oro‐facial motor behaviour adaptation and a DDR‐related articular impairment.     

Trajectories of condylar points during nonworking side and protrusive movements of the mandible.

STATEMENT OF PROBLEM: During lateral excursive and protrusive jaw movements, condylar points are distant from any instantaneous rotational center. Therefore, it is likely that different condylar points would follow similar trajectories during these movements. PURPOSE: This study evaluated the effect of changes in condylar point location on trajectories of condylar points on the nonworking side and during a protrusive jaw movement and compared these changes with the effects described for open-close and working-side condylar movements in the same group of subjects. METHODS: The movements of 5 clinically determined condylar points were recorded in 44 subjects during a contralateral excursion and during protrusion (7 radiographically determined condylar points in 2 subjects). RESULTS: During any single jaw movement, the trajectory of each condylar point was similar in form and dimension to the other condylar points within that subject. CONCLUSION: Changes in condylar point location had little effect on the trajectories of condylar points on the nonworking side and during protrusive jaw movement.     

Clinical study on the relationship between chewing movements and temporomandibular joint abnormalities

Chewing movements are accomplished by the harmonious function of the stomatognathic system. Therefore, TMJs play important roles in chewing movements. Recently, significant findings on TMJ abnormalities have been obtained from many studies. However, the relationship between chewing movements and TMJ abnormalities remains unclear. The purpose of this study was to examine how TMJ abnormalities were reflected in chewing movements. Incisor point movements during chewing (chewing pattern) were investigated in 150 abnormal and 25 normal subjects using Sirognathograph Analysing System. Abnormal subjects were composed of 45 patients with anterior disk displacement with reduction (reciprocal click), 20 patients with anterior disk displacement without reduction (closed lock), 50 patients with osteoarthrosis and 35 patients with MPD syndrome. Analysis of condylar movements during chewing were also performed in 9 normal and 20 abnormal subjects. The results were as follow; 1. Subjects with TMJ abnormalities tended to show abnormal chewing patterns when chewing at their non-abnormal sides. 2. TMJ abnormality of each different type tended to show its respective characteristic chewing pattern. 1) Subjects with osteoarthrosis and reciprocal click without condylar posterior dislocation tended to show deviation of the turning point to the non-chewing side, with a convex opening path in the frontal plane and a lack of anteroposterior width in the sagittal plane. This finding was associated with the limitation in movement of the abnormal-side condyle. 2) Subjects with reciprocal click with condylar posterior dislocation tended to show a concave opening path and reversed or cross-over patterns in the frontal and horizontal planes, respectively. This finding was associated with the movement of the abnormal-side condyle in the medio-anterior direction during the initial phase of opening. 3) Subjects with closed lock without condylar posterior dislocation tended to show deviation of the turning point to the non-chewing side, with a concave opening path in the frontal plane and a lack of anteroposterior width in the sagittal plane. This finding was associated with the severe limitation in movement of the abnormal-side condyle. 4) Subjects with closed lock with condylar posterior dislocation characteristically tended to show reversed or cross-over patterns in the horizontal plane. This finding was associated with the movement of the abnormal-side condyle in the medio-anterior direction during the initial phase of opening. However, this movement was smaller than that of the reciprocal click. 3. Subjects with MPD syndrome showed chewing patterns similar to those of normal subjects. From the results, close relationships were found between chewing movements and TMJ abnormalities.     

Ipsilateral interferences and working-side condylar movements

There is limited knowledge of the effects of the occlusion on temporomandibular joint function. AIM: The aim was to investigate the influence of a working-side occlusal alteration (OA, i.e. interference) on trajectories of working-side condylar points during standardized lateral jaw movements (laterotrusion) tracked by a jaw-tracking system. METHODS: Ten trials of right laterotrusion were repeated under: control 1 (before OA), OA (immediately after placement of a working-side interference) and control 2 (immediately after removal of OA) conditions. RESULTS: During right jaw movement, the paths of the working-side condylar points under OA were significantly more inferior and anterior to those under control at the same amount of mid-incisor-point displacement from the intercuspal position. The OA significantly reduced the rotation of the mandible about the antero-posterior and supero-inferior axes and significantly increased the opening angle. Controls 1 and 2 were not significantly different. CONCLUSIONS: A working-side interference has an immediate, significant effect on working-side condylar movement.     

Lengths of condylar pathways measured with computerized axiography (CADIAX®) and occlusal index in patients and volunteers

The lengths of the condylar pathways during protrusive and opening movements were investigated with computerized axiography in 100 individuals. Forty‐two patients suffering from anterior disk displacement with reduction (ADD) in one or both temporomandibular joints (TMJ) and 28 patients with anterior overrotation clicking (AOC) of the TMJ were compared with 30 asymptomatic volunteers. Patients suffering from ADD showed significantly shorter tracings than did the two other groups. A significant difference of length of TMJ movement between men and women was found only in one group. The occlusal indices (OI) of the three groups were assessed and compared with each other. Here, a significant difference was found between volunteers and patients suffering ADD and between volunteers and patients with AOC. Between men and women a significant difference of the OI was found in the group with AOC, women presenting higher scores than men. Except for the group of patients with ADD, who showed shorter average lengths, volunteers as well as patients with AOC, were within the normal limits given in the literature for TMJ movement lengths recorded with axiography. The results of this examination therefore indicate that when considering movement length alone no discrimination between healthy and diseased TMJ can be made.     

Rotational head motion concurrent to rhythmical mandibular opening movements

We have previously demonstrated the existence of a functional-rhythmical coupling between the head and the mandible using maxillary and mandibular incisal tracking points. However, that data did not provide information neither on the movement of the head as a whole nor on the location of its instantaneous centre of rotation. Thus, the objective of the present study was to determine whether the head undergoes a rotational motion during mouth opening and to locate its putative instantaneous centre of rotation. The same 6 d.f. (degree of freedom) measuring device employed in our previous studies was used again to analyse data from five male adults (age range: 26-29 years old) chosen as subjects. Concomitant head and mandibular movements were assessed in the sagittal plane by allocating several reference points in the head (upper incisor, cranial base, occipital and parietal points) and a mandibular incisor point during maximal mouth open-close movements. Then, the magnitude and inclination of the vectors of motion in each reference point during the opening phase were calculated. The instantaneous centre of rotation was defined as the point showing the least amount of motion in a determined area around each head reference point. The mandibular incisal point and the maxillary incisal point showed concomitant movements; that is, during opening the mandibular point moved downwards and the maxillary incisor point upwards. Making a large jaw opening movement caused an inferior-anterior displacement in the O point, a posterior-inferior displacement of the P point, and an anterior-superior displacement in the C point in all subjects. During jaw closing all points followed a trajectory opposite to that described above. In other words, during opening the head moved clockwise and counter-clockwise during closing, at least in the sagittal plane of the subjects' left side. These results suggest that the head undergoes a rotation-like sagittal movement during mouth opening whose rotation centre seems to be located above the cranial base point, which was set close to the centre of mass of the head. However, its location varies according to the magnitude of mouth opening.     

Dynamic stereometry of the temporomandibular joint

Studies on jaw kinematics have provided a good understanding of the motion of the mandible in space, but are of little biomechanical relevance because they could not relate the movements to anatomic structures. This is possible by the combination of three-dimensional reconstructions of the temporomandibular joint (TMJ) anatomy with jaw motion recordings. This technique allows us to analyze the variation of the relationship between the articular surfaces, providing indirect insight into disk deformation during function and parafunction as well as TMJ loading. As far as the variation of the condyle-fossa distance is concerned, data indicated that during chewing the distance was smaller 1) on closing than on opening; 2) on the balancing than on the working side; and 3) during chewing of hard than soft food. Moreover, during a forceful static biting, the condyle-fossa distance decreased more on the contralateral, i.e. on the balancing side than on the working side. The decrease was related to the degree of clenching force. These results support the content that both condyles are loaded during chewing and the balancing side joint more than the working one. Biomechanically, the development of osteoarthrosis is more likely related to the magnitude and frequency of stresses applied on the cartilage. Joint movements produce tractional forces that may cause shear stresses contributing to cartilage wear and fatigue. Tractional forces are the result of frictional forces caused by the cartilage surface rubbing and of plowing forces caused by the translation of a stress-field through the cartilage matrix, as the intra-articular space changes during motion. Translation of the stress-field in mediolateral direction seems to be particularly important for the integrity of the TMJ disk because of its anisotropic properties. Dynamic stereometry showed that stress-fields translate in mediolateral direction during opening/closing, protrusion and laterotrusion, and that their translatory velocity varies intraindividually and with the rate of the condylar movement. Furthermore, the results seem to indicate that the lateral area of the TMJ disk is more often exposed to shear stresses caused by stress-field translation than the medial one. In conclusion, dynamic stereometry provides a good visualization of the movement of the condyles in the respective fossae. This helps improving our understanding for the complexity of condylar movements. The technique may also contribute to ameliorate our knowledge of TMJ biomechanics and therefore of the etiology of degenerative joint diseases and possibly also of internal derangement.     

Evaluation of condylar surface CT values related to condylar height reduction after orthognathic surgery

This study was performed to evaluate the relationship between condylar height reduction and changes in condylar surface computed tomography (CT) values in jaw deformity patients following orthognathic surgery.Mandibular advancement by sagittal split ramus osteotomy (SSRO) with Le Fort I osteotomy was performed in class II patients, and mandibular setback by SSRO with Le Fort I osteotomy was performed in class III patients. The maximum CT values (pixel values) at five points on the condylar surface and the condylar height, ramus height, condylar square, ramus angle, and gonial angle in the sagittal plane were measured preoperatively and 1 year postoperatively. Disc position was classified as anterior disc displacement (ADD) or other types by using magnetic resonance imaging (MRI).Ninety-two condyles of 46 female patients were prepared for this study. Their temporomandibular joints (TMJs) were divided into two groups based on class (46 joints in class II and 46 joints in class III) and two groups based on the findings (25 joints with ADD and 67 joints with other findings). ADD with and without reduction was observed in two joints in the class III group and in 23 joints in the class II group. The distribution of ADD incidence had not changed 1 year after surgery. Condylar height decreased 1 year after surgery in both class II patients (mandibular advancement) (p < 0.0001) and class III patients (mandibular setback) (p = 0.0306). Similarly, condylar height decreased 1 year after surgery both in patients who showed ADD (p = 0.0087) and those with other types (p = 0.0023). Significant postoperative increases at all angle sites on the condylar surface were found in the class II (p < 0.05) and ADD (p < 0.05) groups.This study showed that an enhanced condylar surface CT value might be one sign of condylar height reduction related to sequential condylar resorption, in combination with ADD.     

Influence of balancing‐side occlusal interference on smoothness of working‐side condylar movement and intra‐articular space in chewing efforts

Response of temporomandibular joint (TMJ) articulation adapting to occlusal alteration has been sparsely known. For 10 healthy adults with acceptably good occlusion, an artificial occlusal interference (OI) was introduced to the lower molar on the balancing side of unilateral chewing. Subjects were asked to chew a gum on their preferred side. The chewing jaw movements with/without the OI were recorded using a video‐based optoelectronic system. The mandibular movements were generated in each individual's TMJ model reconstructed by magnetic resonance images. The smoothness of local condylar point movements towards the normal direction of the condylar surface and interarticular space on the working side was measured. Overall, the smoothness of condylar point movements in the closing phase was impaired immediately after introduction of the OI. In the intercuspal phase, the OI increased the joint space. After about 60 chewing cycles, the movement smoothness and joint space began to recover. These findings suggest that OI on the balancing side induced irregular stress field translation on the working‐side condylar surface followed by acute recovery process.