Synthesis of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[Methyl‐11C]thymine ([11C]FMAU) via a Stille cross‐coupling reaction with [11C]methyl iodide

1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[methyl‐¹¹C]thymine ([¹¹C]FMAU) [¹¹C]‐ 1 was synthesised via a palladium‐mediated Stille coupling reaction of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐5‐(trimethylstannyl)uracil 2 with [¹¹C]methyl iodide in a one‐pot procedure. The reaction conditions were optimized by screening various catalysts and solvents, and by altering concentrations and reaction temperatures. The highest yield was obtained using Pd₂(dba)₃ and P(o‐tolyl)₃ in DMF at 130°C for 5 min. Under these conditions the title compound [¹¹C]‐ 1 was obtained in 28±5% decay‐corrected radiochemical yield calculated from [¹¹C]methyl iodide (number of experiments=7). The radiochemical purity was >99% and the specific radioactivity was 0.1 GBq/μmol at 25 min after end of bombardment. In a typical experiment 700–800 MBq of [¹¹C]FMAU [¹¹C]‐ 1 was obtained starting from 6–7 GBq of [¹¹C]methyl iodide. A mixed ¹¹C/¹³C synthesis to yield [¹¹C]‐ 1 /(¹³C)‐ 1 followed by ¹³C‐NMR analysis was used to confirm the labelling position. The labelling procedure was found to be suitable for automation. Copyright © 2002 John Wiley & Sons, Ltd.     

Preparation of [11C]methyl nona‐fluorobutyl‐1‐sulfonate ([11C]MeONf) and its use in the synthesis of [11C]‐6‐OH‐BTA‐1

The rapid, simple and high‐yield synthesis of the extraordinarily reactive ¹¹C‐methylating agent, [¹¹C]methyl nona‐fluorobutyl‐1‐sulfonate ([¹¹C]MeONf), and its use in the synthesis of the promising β‐amyloid imaging agent, [¹¹C]‐6‐OH‐BTA‐1, is reported. In terms of radioactive methylation yields, [¹¹C]MeONf seems to surpass [¹¹C]methyl trifluoromethansulfonate ([¹¹C]MeOTf) as a methylating agent in this particular case giving the ¹¹C‐labelled compound in high‐preparative radiochemical yields between 27 and 29% EOS with a minimum formation of radioactive by‐products. Copyright © 2007 John Wiley & Sons, Ltd.     

Nitroaldol reaction of nitro[11C]methane to form 2‐(hydroxymethyl)‐2‐nitro[2‐11C]propane‐1,3‐diol and [11C]Tris

The nitroaldol reaction of nitro[¹¹C]methane and formaldehyde, which yields 2‐(hydroxymethyl)‐2‐nitro[2‐¹¹C]propane‐1,3‐diol, is explored. The fluoride‐ion‐assisted nitroaldol reaction using (C₄H₉)₄NF was rapid and provided the desired nitrotriol in more than 97% radiochemical conversion (decay‐corrected) in 3 min at room temperature. Neither 2‐nitro[2‐¹¹C]ethanol nor 2‐nitro[2‐¹¹C]propane‐1,3‐diol was observed under the reaction conditions. The preparation of 2‐amino‐2‐(hydroxymethyl)‐[2‐¹¹C]propane‐1,3‐diol ([¹¹C]Tris) was described, which was followed by the nitro‐group reduction using NiCl₂ and NaBH₄ in aqueous MeOH. The decay‐corrected radiochemical conversion to [¹¹C]Tris was 68.0±6.5% in two steps. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of 1,1′ [11C]‐methylene‐di‐(2‐naphthol) ([11C]ST1859) for PET studies in humans

1,1′‐Methylene‐di‐(2‐naphthol) (ST1859), a candidate drug for the treatment of Alzheimer's disease, was radiolabelled with carbon‐11 with the aim to perform PET microdosing studies in humans. The radiosynthesis was automated in a commercial synthesis module (Nuclear Interface PET tracer synthesizer) and proceeded via reaction of [¹¹C]formaldehyde with 2‐naphthol. [¹¹C]formaldehyde was prepared by catalytic dehydrogenation of [¹¹C]methanol (conversion yield: 48±11% (n = 19)) employing a recently developed silver‐containing ceramic catalyst. Starting from 69±3 GBq of [¹¹C]carbon dioxide (n = 19), 4±1 GBq of [¹¹C]ST1859 (decay‐corrected to the end of bombardment), readily formulated for intravenous administration, could be obtained in an average synthesis time of 38 min. The specific radioactivity of [¹¹C]ST1859 at the end of synthesis exceeded 32 GBq/µmol. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of (±) 3‐(6‐nitro‐2‐quinolinyl)‐[9‐methyl‐11C]‐3,9‐diazabicyclo‐[4.2.1]‐nonane ([11C‐methyl]NS 4194)

(±) 3‐(6‐Nitro‐2‐quinolinyl)‐[9‐methyl‐¹¹C]‐3,9‐diazabicyclo‐[4.2.1]‐nonane ([¹¹C‐methyl]NS 4194), a selective serotonin reuptake inhibitor (SSRI), was synthesised within 35 min after end of bombardment with a radiochemical purity >98%. It had a decay‐corrected radiochemical yield of 7% after preparative HPLC, and a specific radioactivity around 37 GBq/μmol (EOS). A typical production starting with 40 GBq [¹¹C]CO₂ yielded 800 MBq of radiolabelled [¹¹C‐methyl]NS 4194 in a formulated solution. The synthesis of the precursor to [¹¹C‐methyl]NS 4194, (±) 9‐H‐3‐[6‐nitro‐(2‐quinolinyl)]‐3,9‐diazabicyclo‐[4.2.1]‐nonane, as well as the unlabelled analogue (±) 9‐methyl 3‐[6‐nitro‐(2‐quinolinyl)]‐3,9‐diazabicyclo‐[4.2.1]‐nonane (NS 4194), are also described. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]propyl and [1‐11C]butyl iodide from [11C]carbon monoxide and their use in alkylation reactions

A method to prepare [1‐¹¹C]propyl iodide and [1‐¹¹C]butyl iodide from [¹¹C]carbon monoxide via a three step reaction sequence is presented. Palladium mediated formylation of ethene with [¹¹C]carbon monoxide and hydrogen gave [1‐¹¹C]propionaldehyde and [1‐¹¹C]propionic acid. The carbonylation products were reduced and subsequently converted to [1‐¹¹C]propyl iodide. Labelled propyl iodide was obtained in 58±4% decay corrected radiochemical yield and with a specific radioactivity of 270±33 GBq/µmol within 15 min from approximately 12 GBq of [¹¹C]carbon monoxide. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Butyl iodide was obtained correspondingly from propene and approximately 8 GBq of [¹¹C]carbon monoxide, in 34±2% decay corrected radiochemical yield and with a specific radioactivity of 146±20 GBq/µmol. The alkyl iodides were used in model reactions to synthesize [O‐propyl‐1‐¹¹C]propyl and [O‐butyl‐1‐¹¹C]butyl benzoate. Propyl and butyl analogues of etomidate, a β‐11‐hydroxylase inhibitor, were also synthesized. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of N‐(2,5‐dimethoxybenzyl)‐N‐(5‐fluoro‐2‐phenoxyphenyl)[carbonyl‐11C]acetamide ([carbonyl‐11C]DAA1106) and analogues using [11C]carbon monoxide and palladium(0) complex

N‐(2,5‐Dimethoxybenzyl)‐N‐(5‐fluoro‐2‐phenoxyphenyl)acetamide (DAA1106), a potent and selective ligand for peripheral benzodiazepine receptor, and eight structurally related analogues were labelled with ¹¹C at the carbonyl position using a low concentration of [¹¹C]carbon monoxide and the micro‐autoclave technique. A combinatorial approach was applied to synthesize the analogues using similar reaction conditions. Palladium‐mediated carbonylation using tetrakis(triphenylphosphine)palladium, various amines and methyl iodide or iodobenzene was employed in the synthesis. The ¹¹C‐labelled products were obtained with 10–55% decay‐corrected radiochemical yields and the final product was more than 97% pure in all cases. Specific radioactivity was determined for the compound [carbonyl‐¹¹C]DAA1106 using a single experiment and a 10‐µA h bombardment. The specific radioactivity, measured 36 min after end of bombardment, was 455 GBq/µmol. Synthetic routes to the precursors and reference compounds were also developed. The presented approach is a novel method for the synthesis of [carbonyl‐¹¹C]DAA1106 and its analogues, and allows the formation of a library of ¹¹C‐labelled DAA1106 analogues which can be used to optimize the performance as a potential positron emission tomography tracer. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of (E)‐2,3′,4,5′‐tetramethoxy[2‐11C]stilbene

In this paper, we describe the radiosynthesis of the compound (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene, a potential, universal tumour positron emission tomography imaging agent. The production of (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was carried out via ¹¹C‐methylation of (E)‐2‐(hydroxy)‐3′,4,5′‐trimethoxystilbene by using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was obtained with a radiochemical purity greater than 95% in a 20 ± 2% decay‐corrected radiochemical yield, based upon [¹¹C]carbon dioxide. Synthesis, purification and formulation were completed on an average of 30 min following the end of bombardment (EOB). The specific radioactivity obtained was 1.9 ± 0.6 GBq/µmol at EOB. Copyright © 2007 John Wiley & Sons, Ltd.     

Reductive N‐alkylation of secondary amines with [2‐11C]acetone

The development of a labeling method for secondary amines with [2‐¹¹C]acetone is described since the R₂N‐isopropyl moiety is present in many biologically active compounds. The influence of a variety of parameters (e.g. reagents, solvents, temperature, and time) on the reaction outcome is discussed. Under the optimal reaction conditions, [¹¹C]1‐isopropyl‐4‐phenylpiperazine ([¹¹C]iPPP) was synthesized from [2‐¹¹C]acetone and 1‐phenylpiperazine in a decay‐corrected radiochemical yield of 72%. The overall synthesis time, from EOB to HPLC analysis of [¹¹C]iPPP, was 20 min. Specific activity was 142–208 GBq/μmol at the end of synthesis. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of (S)‐5‐methoxymethyl‐3‐[6‐(4,4,4‐trifluorobutoxy)benzo[d]isoxazol‐3‐yl] oxazolidin‐2‐[11C]one ([11C]SL25.1188), a novel radioligand for imaging monoamine oxidase‐B with PET

Within a novel series of 2‐oxazolidinones developed in the past by Sanofi‐Synthélabo, SL25.1188 ((S)‐5‐methoxymethyl‐3‐[6‐(4,4,4‐trifluorobutoxy)benzo[d]isoxazol‐3‐yl]oxazolidin‐2‐one), a compound that inhibits selectively and competitively MAO‐B in human and rat brain (Ki values of 2.9 and 8.5 nM for MAO‐B, respectively, and ED_{50 (rat)}: 0.6 mg/kg p.o.), was considered an appropriate candidate for imaging this enzyme with positron emission tomography. SL25.1188 was labelled with carbon‐11 (T_1/2: 20.38 min) in one chemical step using the following process: (i) reaction of [¹¹C]phosgene with the corresponding ring‐opened precursor (1.2–2.5 mg) at 100°C for 2 min in dichloromethane (0.5 mL) followed by (ii) concentration to dryness of the reaction mixture and finally (iii) semi‐preparative HPLC purification on a Waters Symmetry^® C18. A total of 300–500 MBq of [¹¹C]SL25.1188 (>95% chemically and radiochemically pure) could be obtained within 30–32 min (Sep‐pak‐based formulation included) with specific radioactivities ranging from 50 to 70 GBq/µmol (3.5–7% decay‐corrected radiochemical yield, based on starting [¹¹C]CH₄). Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of a 11C‐labelled taxane derivative by [1‐11C]acetylation

The ¹¹C‐labelling of the taxane derivative BAY 59‐8862 ( 1 ), a potent anticancer drug, was carried out as a module‐assisted automated multi‐step synthesis procedure. The radiotracer [¹¹C]1 was synthesized by reacting [1‐¹¹C]acetyl chloride ( 6 ) with the lithium salt of the secondary hydroxy group of precursor 3 followed by deprotection. After HPLC purification of the final product [¹¹C]1 , its solid‐phase extraction, formulation and sterile filtration, the decay‐corrected radiochemical yield of [¹¹C]1 was in the range between 12 and 23% (related to [¹¹C]CO₂; n=10). The total synthesis time was about 54 min after EOB. The radiochemical purity of [¹¹C]1 was greater than 96% and the chemical purity exceeded 80%. The specific radioactivity was 16.8±4.7 GBq/µmol (n=10) at EOS starting from 80 GBq of [¹¹C]CO₂. Copyright © 2006 John Wiley & Sons, Ltd.     

A new approach for 11C–C bond formation: Synthesis of 17α‐(3′‐[11C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol

A new approach for ¹¹C–C bond formation via a Sonogashira‐like cross‐coupling reaction of terminal alkynes with [¹¹C]methyl iodide was exemplified by the synthesis of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol. The LC‐purified title compound was obtained in decay‐corrected radiochemical yields of 27–47% (n=8) based on [¹¹C]methyl iodide within 21–27 min after EOB. In a typical synthesis starting from 9.6 GBq [¹¹C]methyl iodide, 1.87 GBq of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol was synthesized in radiochemical purity >99%. The specific radioactivity ranged between 10 and 19 GBq/µmol, and the labeling position was verified by ¹³C‐NMR analysis of the corresponding ¹³C‐labeled compound. Copyright © 2003 John Wiley & Sons, Ltd.     

Efficient syntheses of [11C]zidovudine and its analogs by convenient one‐pot palladium(0)–copper(I) co‐mediated rapid C‐[11C]methylation

The nucleosides zidovudine (AZT), stavudine (d4T), and telbivudine (LdT) are approved for use in the treatment of human immunodeficiency virus (HIV) and hepatitis B virus (HBV) infections. To promote positron emission tomography (PET) imaging studies on their pharmacokinetics, pharmacodynamics, and applications in cancer diagnosis, a convenient one‐pot method for Pd(0)–Cu(I) co‐mediated rapid C–C coupling of [¹¹C]methyl iodide with stannyl precursor was successfully established and applied to synthesize the PET tracers [¹¹C]zidovudine, [¹¹C]stavudine, and [¹¹C]telbivudine. After HPLC purification and radiopharmaceutical formulation, the desired PET tracers were obtained with high radioactivity (6.4–7.0 GBq) and specific radioactivity (74–147 GBq/µmol) and with high chemical (>99%) and radiochemical (>99.5%) purities. This one‐pot Pd(0)–Cu(I) co‐mediated rapid C‐[¹¹C]methylation also worked well for syntheses of [methyl‐¹¹C]thymidine and [methyl‐¹¹C]4′‐thiothymidine, resulting twice the radioactivity of those prepared by a previous two‐pot method. The mechanism of one‐pot Pd(0)–Cu(I) co‐mediated rapid C‐[¹¹C]methylation was also discussed.     

Synthesis of [1‐11C]ethyl iodide from [11C]carbon monoxide and its application in alkylation reactions

A method is presented for preparing [1‐¹¹C]ethyl iodide from [¹¹C]carbon monoxide. The method utilizes methyl iodide and [¹¹C]carbon monoxide in a palladium‐mediated carbonylation reaction to form a mixture of [1‐¹¹C]acetic acid and [1‐¹¹C]methyl acetate. The acetates are reduced to [1‐¹¹C]ethanol and subsequently converted to [1‐¹¹C]ethyl iodide. The synthesis time was 20 min and the decay‐corrected radiochemical yield of [1‐¹¹C]ethyl iodide was 55 ± 5%. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Ethyl iodide was used in two model reactions, an O‐alkylation and an N‐alkylation. Starting with approximately 2.5 GBq of [¹¹C]carbon monoxide, the isolated decay‐corrected radiochemical yields for the ester and the amine derivatives were 45 ± 0.5% and 25 ± 2%, respectively, based on [¹¹C]carbon monoxide. Starting with 10 GBq of [¹¹C]carbon monoxide, 0.55 GBq of the labelled ester was isolated within 40 min with a specific radioactivity of 36 GBq/µmol. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of [O‐methyl‐11C]‐4‐(1,3‐dimethoxy‐2‐propylamino)‐2,7‐dimethyl‐8‐(2,4‐dichlorophenyl)[1,5‐a]pyrazolo‐1,3,5‐triazine ([11C]DMP696): a potential PET ligand for CRF1 receptors

Synthesis of [O‐methyl‐¹¹C]‐4‐(1,3‐dimethoxy‐2‐propylamino)‐2,7‐dimethyl‐8‐(2,4‐dichlorophenyl)[1,5‐a]pyrazolo‐1,3,5‐triazine ([¹¹C]DMP696), a highly selective CRF₁ antagonist has been achieved. The total time required for the synthesis of [¹¹C]DMP696 is 30 min from EOB using [¹¹C]methyl triflate in THF, with a 16% yield (EOS) and >99% chemical and radiochemical purities along with a specific activity of >2000 Ci/mmol (EOS). Copyright © 2004 John Wiley & Sons, Ltd.     

The automated radiosynthesis and purification of the opioid receptor antagonist, [6‐O‐methyl‐11C]diprenorphine on the GE TRACERlab FXFE radiochemistry module

[6‐O‐Methyl‐¹¹C]diprenorphine ([¹¹C]diprenorphine) is a positron emission tomography ligand used to probe the endogenous opioid system in vivo. Diprenorphine acts as an antagonist at all of the opioid receptor subtypes, that is, μ (mu), κ (kappa) and δ (delta). The radiosynthesis of [¹¹C]diprenorphine using [¹¹C]methyl iodide produced via the ‘wet’ method on a home‐built automated radiosynthesis set‐up has been described previously. Here, we describe a modified synthetic method to [¹¹C]diprenorphine performed using [¹¹C]methyl iodide produced via the gas phase method on a GE TRACERlab FX_FE radiochemistry module. Also described is the use of [¹¹C]methyl triflate as the carbon‐11 methylating agent for the [¹¹C]diprenorphine syntheses. [¹¹C]Diprenorphine was produced to good manufacturing practice standards for use in a clinical setting. In comparison to previously reported [¹¹C]diprenorphine radiosyntheisis, the method described herein gives a higher specific activity product which is advantageous for receptor occupancy studies. The radiochemical purity of [¹¹C]diprenorphine is similar to what has been reported previously, although the radiochemical yield produced in the method described herein is reduced, an issue that is inherent in the gas phase radiosynthesis of [¹¹C]methyl iodide. The yields of [¹¹C]diprenorphine are nonetheless sufficient for clinical research applications. Other advantages of the method described herein are an improvement to both reproducibility and reliability of the production as well as simplification of the purification and formulation steps. We suggest that our automated radiochemistry route to [¹¹C]diprenorphine should be the method of choice for routine [¹¹C]diprenorphine productions for positron emission tomography studies, and the production process could easily be transferred to other radiochemistry modules such as the TRACERlab FX C pro. © 2014 The Authors. Journal of Labelled Compounds and Radiopharmaceuticals Published by John Wiley & Sons Ltd.     

Novel synthesis of [1‐11C]γ‐vinyl‐γ‐aminobutyric acid ([1–11C]GVG) for pharmacokinetic studies of addiction treatment

γ‐Vinyl‐γ‐aminobutyric acid (GVG, Vigabatrin^®), a suicide inhibitor of GABA‐transaminase (GABA‐T), has been suggested as a new drug for the treatment of substance abuse. In order to better understand its pharmacokinetics and potential side effects, we have developed a radiosynthesis of carbon‐11 (t_1/2=20 min) labeled GVG for positron emission tomographic (PET) studies. We report here a novel synthetic strategy to prepare the precursor and to efficiently label GVG with C‐11. 5‐Bromo‐3‐(carbobenzyloxy)amino‐1‐pentene was synthesized in five steps from homoserine lactone, including reduction and methylenation. This was used in a one‐pot, two‐step radiosynthesis. Displacement of bromide with no‐carrier‐added [¹¹C]cyanide followed by acid hydrolysis afforded [1‐¹¹C]GVG with decay corrected radiochemical yields of 27±9% (n=6, not optimized) with respect to [¹¹C]cyanide in a synthesis time of 45 min. Copyright © 2002 John Wiley & Sons, Ltd.     

Radiosynthesis of [N‐methyl‐11C]methylene blue

In this paper we present the radiochemical synthesis of the novel compound [N‐methyl‐¹¹C]methylene blue. The synthesis of [N‐methyl‐¹¹C]methylene blue was accomplished by means of ¹¹C‐methylation of commercially available Azure B using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). Following purification [N‐methyl‐¹¹C]methylene blue was obtained with a radiochemical purity greater than 97% in a 4–6% decay corrected radiochemical yield. The synthesis was completed in an average of 35 min following the end of bombardment. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of a 2‐substituted 4,5‐dihydro‐1H‐[2‐11C] imidazole: the I2 imidazoline receptor ligand [11C] benazoline

Benazoline (2‐naphthalen‐2‐yl‐4,5‐dihydro‐1H‐imidazole) is a selective high‐affinity ligand for the imidazoline I₂ receptor. This compound was labelled with carbon‐11 (T_1/2=20.4 min) at the number two carbon atom of its 2‐imidazoline ring. Cyclotron‐produced [¹¹C]carbon dioxide reacted with 2‐naphthylmagnesium bromide to give 2‐[carboxyl‐¹¹C]naphthoic acid in 60% radiochemical yield. The latter was heated with a mixture of ethylenediamine and its dihydrochloride at 300°C to give [¹¹C]benazoline in 16% overall yield, relative to [¹¹C]carbon dioxide and with a specific radioactivity of 54 GBq/μmol, decay corrected for end of irradiation. The procedure requires about 45 min from end of cyclotron irradiation. This method should be extendable to other imidazolines. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of 11C‐labeled ubiquinone and ubiquinol via Pd0‐mediated rapid C‐[11C]methylation using [11C]methyl iodide and 39‐demethyl‐39‐(pinacolboryl)ubiquinone

To enable positron emission tomography (PET) imaging of the in vivo kinetics of ubiquinone and ubiquinol, which is referred to as coenzyme Q₁₀, their ¹¹C‐radiolabeled counterparts were synthesized herein. ¹¹C‐Labeled ubiquinone [¹¹C]‐ 1 was realized by Pd‐mediated rapid C‐[¹¹C]methylation of [¹¹C]CH₃I with 39‐demethyl‐39‐(pinacolboryl)ubiquinone, prepared by Ru‐catalyzed olefin metathesis of unradiolabeled ubiquinone with 2‐(pinacolboryl)propene. Subsequent reduction of [¹¹C]‐ 1 using Na₂S₂O₄ yielded ¹¹C‐labeled ubiquinol [¹¹C]‐ 2 . The synthesis time and [¹¹C]CH₃I‐based radiochemical yield of [¹¹C]‐ 1 were within 36 minutes and up to 53%, while those of [¹¹C]‐ 2 were within 38 minutes and up to 39%, respectively. After radiopharmaceutical formulation, the qualities of [¹¹C]‐ 1 and [¹¹C]‐ 2 were confirmed to be applicable for animal PET studies. The analytical values of [¹¹C]‐ 1 and [¹¹C]‐ 2 are as follows: radioactivity of up to 3.5 and 1.4 GBq, molar activity of 21 to 78 and 48 to 76 GBq/μmol, radiochemical purity of greater than 99% and greater than 95%, and chemical purity of greater than 99% and 77%, respectively. The concept behind this radiolabeling procedure is that unradiolabeled natural ubiquinone can be converted to ¹¹C‐radiolabeled ubiquinone and ubiquinol via a pinacolborane‐substituted ubiquinone derivative. Each PET probe was used for molecular imaging using rats to investigate the in vivo kinetics and biodistribution of the coenzyme Q₁₀.