应用锥形束CT评估腭部种植体的植入部位

目的 对腭部种植体支抗植入部位的骨厚度和骨密度进行定量研究,为临床安全、稳定地植入腭部种植体提供参考依据.方法 测量34例正畸患者(18～35岁)腭部20个兴趣区的骨厚度、种植体可植入率高的10个部位的骨密度,将34例患者的头颅锥形束CT扫描数据导入EZ种植分析软件获得三维重建图像,以骨厚度、骨密度为指标的数据进行K均值聚类分析.结果 将可植入率高的10个部位分为3类(Ⅰ～Ⅲ类),骨厚度:Ⅱ类(8.3±0.4 mm)>Ⅰ类(6.2±0.5 mm)、Ⅲ类(5.4±0.4 mm);骨密度:Ⅲ类(638.6±42.5 HU)>Ⅰ类(514.6±63.6 HU)>Ⅱ类(414.8±11.1 HU):3类骨厚度、骨密度比较,差异有统计学意义(P<0.05).结论 应用锥形束CT评估腭部种植体支抗的植入部位,在一定程度上有助于种植体安全、稳定.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.     

应用锥形束CT评估腭部种植体的植入部位

Objective To investigate the vertical bone height and the bone density of the palate for implants placement using cone beam CT(CBCT)and to provide references to the safe and stable placement of palatal implants.Methods Three-dimensional reformatting images were reconstructed with the selected CBCT scanning data of 34 patients aged 18 to 35 yeras,by means of EZ implant software.The vertical bone height was measured at 20 interesting sites of palate.Bone density was measured at 10 sites that could support 3.0mm long implants.The data of the vertical bone height and bone density were analyzed by Kmeans cluster analysis.Results According to the cluster analysis results,the 10 sites were classified into 3 clusters.There were statistical differences among these three clusters in bone height and bone density(P＜0.05).The ISD result showed that the greatest mean value of vertical bone height was obtained in cluster 2,followed by cluster 1 and cluster 3;the highest bone density was founded in cluster 3,followed by cluster 1 and cluster 2.Conclusions Evaluation of the sites for palatal implant placement with cone beam CT would be helpful in safe and stable implantation.