Multifunctional unimolecular micelles for cancer-targeted drug delivery and positron emission tomography imaging

A multifunctional unimolecular micelle made of a hyperbranched amphiphilic block copolymer was designed, synthesized, and characterized for cancer-targeted drug delivery and non-invasive positron emission tomography (PET) imaging in tumor-bearing mice. The hyperbranched amphiphilic block copolymer, Boltorn(?) H40-poly(L-glutamate-hydrazone-doxorubicin)-b-poly(ethylene glycol) (i.e., H40-P(LG-Hyd-DOX)-b-PEG), was conjugated with cyclo(Arg-Gly-Asp-D-Phe-Cys) peptides (cRGD, for integrin α(v)β(3) targeting) and macrocyclic chelators (1,4,7-triazacyclononane-N, N', N'-triacetic acid [NOTA], for (64)Cu-labeling and PET imaging) (i.e., H40-P(LG-Hyd-DOX)-b-PEG-OCH(3)/cRGD/NOTA, also referred to as H40-DOX-cRGD). The anti-cancer drug, doxorubicin (DOX) was covalently conjugated onto the hydrophobic segments of the amphiphilic block copolymer arms (i.e., PLG) via a pH-labile hydrazone linkage to enable pH-controlled drug release. The unimolecular micelles exhibited a uniform size distribution and pH-sensitive drug release behavior. cRGD-conjugated unimolecular micelles (i.e., H40-DOX-cRGD) exhibited a much higher cellular uptake in U87MG human glioblastoma cells due to integrin α(v)β(3)-mediated endocytosis than non-targeted unimolecular micelles (i.e., H40-DOX), thereby leading to a significantly higher cytotoxicity. In U87MG tumor-bearing mice, H40-DOX-cRGD-(64)Cu also exhibited a much higher level of tumor accumulation than H40-DOX-(64)Cu, measured by non-invasive PET imaging and confirmed by biodistribution studies and ex vivo fluorescence imaging. We believe that unimolecular micelles formed by hyperbranched amphiphilic block copolymers that synergistically integrate passive and active tumor-targeting abilities with pH-controlled drug release and PET imaging capabilities provide the basis for future cancer theranostics.     

Multi-functional self-fluorescent unimolecular micelles for tumor-targeted drug delivery and bioimaging

A novel type of self-fluorescent unimolecular micelle nanoparticle (NP) formed by multi-arm star amphiphilic block copolymer, Boltron^® H40 (H40, a 4th generation hyperbranched polymer)-biodegradable photo-luminescent polymer (BPLP)-poly(ethylene glycol) (PEG) conjugated with cRGD peptide (i.e., H40-BPLP-PEG-cRGD) was designed, synthesized, and characterized. The hydrophobic BPLP segment was self-fluorescent, thereby making the unimolecular micelle NP self-fluorescent. cRGD peptides, which can effectively target α_vβ₃ integrin-expressing tumor neovasculature and tumor cells, were selectively conjugated onto the surface of the micelles to offer active tumor-targeting ability. This unique self-fluorescent unimolecular micelle exhibited excellent photostability and low cytotoxicity, making it an attractive bioimaging probe for NP tracking for a variety of microscopy techniques including fluorescent microscopy, confocal laser scanning microscopy (CLSM), and two-photon microscopy. Moreover, this self-fluorescent unimolecular micelle NP also demonstrated excellent stability in aqueous solutions due to its covalent nature, high drug loading level, pH-controlled drug release, and passive and active tumor-targeting abilities, thereby making it a promising nanoplatform for targeted cancer theranostics.     

Amphiphilic multi-arm-block copolymer conjugated with doxorubicin via pH-sensitive hydrazone bond for tumor-targeted drug delivery

Folate-conjugated unimolecular micelles based on amphiphilic hyperbranched block copolymer, Boltorn^® H40-poly(l-aspartate-doxorubicin)-b-poly(ethylene glycol)/FA-conjugated poly(ethylene glycol) (H40-P(LA-DOX)-b-PEG-OH/FA), were synthesized as a carrier for tumor-targeted drug delivery. The anticancer drug DOX was covalently conjugated onto the hydrophobic segments of the amphiphilic block copolymer arms by pH-sensitive hydrazone linkage. The size of the unimolecular micelles was determined as 17–36 and 10–20 nm by dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. The release profiles of the DOX from the H40-P(LA-DOX)-b-PEG-OH/FA micelles showed a strong dependence on the environmental pH values. The DOX release rate increased in the acidic medium due to the acid-cleavable hydrazone linkage between the DOX and micelles. Cellular uptake of the H40-P(LA-DOX)-b-PEG-OH/FA micelles was found to be higher than that of the H40-P(LA-DOX)-b-PEG-OH micelles because of the folate-receptor-mediated endocytosis, thereby providing higher cytotoxicity against the 4T1 mouse mammary carcinoma cell line. Degradation studies showed that the H40-P(LA-DOX)-b-PEG-OH/FA copolymer hydrolytically degraded into polymer fragments within six weeks. These results suggest that H40-P(LA-DOX)-b-PEG-OH/FA micelles could be a promising nanocarrier with excellent in vivo stability for targeting the drugs to cancer cells and releasing the drug molecules inside the cells by sensing the acidic environment of the endosomal compartments.     

Dual pH‐Sensitive DOX‐Conjugated Cyclodextrin‐Core Star Nano‐Copolymer Prodrugs

Herein this study reports dual pH‐sensitive doxorubicin (DOX)‐conjugated β‐cyclodextrin‐core star copolymers with tailoring properties such as direct water‐solubility and stability prior to reaching target sites. For these purposes, three kinds of novel well‐defined β‐cyclodextrin‐core poly(2‐(diethylamino)ethyl methacrylate‐co‐4‐formylphenyl methacrylate)‐b‐poly(poly(ethylene glycol) methyl ether methacrylate) star copolymers (CD‐star‐P(DEA‐co‐FPMA)‐b‐PPEGMA, SPDFP1–3) with different poly(ethylene glycol) methyl ether methacrylate contents are designed and synthesized by atom transfer radical polymerization (ATRP) strategy. 4‐Formylphenyl methacrylate is introduced into the inner arm block of the star copolymers for conjugating DOX by imine bond formation. Interestingly, the DOX‐conjugated β‐cyclodextrin‐core star copolymers not only can directly dissolve in aqueous buffer solution of pH 7.0 to form unimolecular micelles without any aid of organic solvent, but also exhibit strong pH‐dependent DOX release. At normal pH 7.4 the DOX amount released is very small, whereas at pH 5.0 DOX can be released. By selecting SPDFP2–DOX as a representative, it is found that the SPDFP2–DOX micelles show less cytotoxicity compared to carrier‐free DOX and can be internalized by HeLa cells. It is expected that the exploration can provide new strategy for preparing drug delivery system.

     

Folate-conjugated amphiphilic hyperbranched block copolymers based on Boltorn® H40, poly(l-lactide) and poly(ethylene glycol) for tumor-targeted drug delivery

Folate-conjugated amphiphilic hyperbranched block copolymer (H40–PLA-b-MPEG/PEG–FA) with a dendritic Boltorn^® H40 core, a hydrophobic poly(l-lactide) (PLA) inner shell and a hydrophilic methoxy poly(ethylene glycol) (MPEG) and folate-conjugated poly(ethylene glycol) (PEG–FA) outer shell was synthesized as a carrier for tumor-targeted drug delivery. The block copolymer was characterized using ¹H NMR and gel permeation chromatography (GPC) analysis. Due to its core–shell structure, this block polymer forms unimolecular micelles in aqueous solutions. The micellar properties of H40–PLA-b-MPEG/PEG–FA block copolymer were extensively studied by dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). An anticancer drug, doxorubicin in the free base form (DOX) was encapsulated into H40–PLA-b-MPEG/PEG–FA micelles. The DOX-loaded micelles provided an initial burst release (up to 4 h) followed by a sustained release of the entrapped DOX over a period of about 40 h. Cellular uptake of the DOX-loaded H40–PLA-b-MPEG/PEG–FA micelles was found to be higher than that of the DOX-loaded H40–PLA-b-MPEG micelles because of the folate-receptor-mediated endocytosis, thereby providing higher cytotoxicity against the 4T1 mouse mammary carcinoma cell line. In vitro degradation studies revealed that the H40–PLA-b-MPEG/PEG–FA block copolymer hydrolytically degraded into polymer fragments within six weeks. These results indicated that the micelles prepared from the H40–PLA-b-MPEG/PEG–FA block copolymer have great potential as tumor-targeted drug delivery nanocarriers.     

Multiarm cationic star polymers by atom transfer radical polymerization from β-cyclodextrin cores: Influence of arm number and length on gene delivery

Controlled β-cyclodextrin (β-CD) core-based cationic star polymers have attracted considerable attention as non-viral gene carriers. Atom transfer radical polymerization (ATRP) could be readily used to produce the star-shaped polymers. The precise control of the number of initiation sites on the multifunctional core was of crucial importance to the investigation of the structure–property relationship of the functional star gene carriers. Herein, the controlled multiarm star polymers consisting of a β-CD core and various arm lengths of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) were prepared via ATRP from the chloroacetylated β-CD with well-designed initiation sites. Generally, these star polycations can condense plasmid DNA into 100–150 nm nanoparticles with positive zeta potentials of 30–40 mV at N/P ratios (star polymer to DNA ratios) of 17 or higher. The effects of arm numbers and lengths on gene delivery were investigated in detail. With a fixed length of the PDMAEMA arm, the fewer the number of arms, the lower the toxicity. The star polycations with suitable arm numbers possess the best transfection ability. On the other hand, with the fixed molecular weights, the shorter the arms, the lower the toxicity. The polymers with 21 arms possess the lowest transfection efficiency.     

New Improved Thermosets Obtained From Diglycidylether of Bisphenol A and a Multiarm Star Copolymer Based on Hyperbranched Poly(glycidol) Core and Poly(methyl methacrylate) Arms

A well‐defined multiarm star copolymer, hyperbranched poly(glycidol)‐b‐poly(methyl methacrylate) (PGOH‐b‐PMMA), is used as a modifier in the curing of diglycidylether of bisphenol A (DGEBA) using 1‐methyl imidazole (1MI) as anionic initiator. The effect of the polymer topology on the curing and gelation processes is studied. The addition of the PGOH‐b‐PMMA to the resin leaves the complex viscosity unaltered. The addition of the modifier decreases the shrinkage after gelation compared to that measured in the curing of the neat resin. By DMTA a single relaxation process in the pure DGEBA and modified thermoset is found. The addition of the star‐like modifier led to an improvement on the mechanical characteristics such as the impact strength and microhardness in comparison to the neat material.     

pH‐Switchable Complexation between Double Hydrophilic Heteroarm Star Copolymers and a Cationic Block Polyelectrolyte

Double hydrophilic heteroarm star copolymers of poly(methacrylic acid) (PMAA) and poly(ethylene oxide) (PEO) were synthesized via atom‐transfer radical polymerization (ATRP) using the “in‐out” method. The synthesis consisted of three steps. Namely, ATRP was applied to the preparation of a star macroinitiator with PEO arms and a cross‐linked core resulting from the polymerization of divinylbenzene (DVB) in the first step, chain extension with tert‐butyl methacrylate (tBMA) under ATRP conditions, and subsequent hydrolysis of the tert‐butyl groups afforded (PEO)_n‐PDVB‐(PMAA)_n heteroarm star copolymers with a cross‐linked microgel core. This novel type of double hydrophilic heteroarm star copolymer can be considered as unimolecular micelles with hybrid coronas. The star copolymers exhibited pH‐dependent solubility in water, being soluble at high pH and insoluble at low pH, due to the formation of hydrogen‐bonded complexes between the PEO and PMAA arms. A mixed solution of the heteroarm star copolymer and a PEO‐b‐PQDMA diblock copolymer, where PQDMA is poly(2‐(dimethylamino)ethyl methacrylate) fully quaternized with methyl iodide, remained stable in the whole pH range, and exhibited an intriguing pH‐switchable complexation behavior accompanied with structural rearrangement.

     

Image-guided and tumor-targeted drug delivery with radiolabeled unimolecular micelles

Unimolecular micelles formed by dendritic amphiphilic block copolymers poly(amidoamine)–poly(l-lactide)-b-poly(ethylene glycol) conjugated with anti-CD105 monoclonal antibody (TRC105) and 1,4,7-triazacyclononane-N, N′, N-triacetic acid (NOTA, a macrocyclic chelator for ⁶⁴Cu) (abbreviated as PAMAM–PLA-b-PEG–TRC105) were synthesized and characterized. Doxorubicin (DOX), a model anti-cancer drug, was loaded into the hydrophobic core of the unimolecular micelles formed by PAMAM and PLA via physical encapsulation. The unimolecular micelles exhibited a uniform size distribution and pH-sensitive drug release behavior. TRC105-conjugated unimolecular micelles showed a CD105-associated cellular uptake in human umbilical vein endothelial cells (HUVEC) compared with non-targeted unimolecular micelles, which was further validated by cellular uptake in CD105-negative MCF-7 cells. In 4T1 murine breast tumor-bearing mice, ⁶⁴Cu-labeled targeted micelles exhibited a much higher level of tumor accumulation than ⁶⁴Cu-labeled non-targeted micelles, measured by serial non-invasive positron emission tomography (PET) imaging and confirmed by biodistribution studies. These unimolecular micelles formed by dendritic amphiphilic block copolymers that synergistically integrate passive and active tumor-targeting abilities with pH-controlled drug release and PET imaging capabilities provide the basis for future cancer theranostics.     

Tetraphenylsilane‐Cored Star‐Shaped Amphiphilic Block Copolymers for pH‐Responsive Anticancer Drug Delivery

Four‐arm star‐shaped poly[2‐(diethylamino)ethyl methacrylate]‐b‐poly[2‐hydroxyethyl methacrylate]s block copolymers using tetraphenylsilane (TPS) as a core with adjustable arm lengths are synthesized through two‐step atom transfer radical polymerizations. For comparison, a linear block copolymer with similar molecular weight is also prepared. The assembled star‐shaped copolymer micelles exhibit sizes of 102–139 nm and critical micelle concentrations of 1.49–3.93 mg L^?1. Moreover, the bulky and rigid TPS core is advantageous for propping up the four star‐shaped arms to generate large intersegmental space. As a result, the drug‐loading capacity in the micelles is up to 33.97 wt%, much surpassing the linear counterpart (8.92 wt%) and the previously reported star‐shaped copolymers prepared using pentaerythritol as the core. Furthermore, the micelles show sensitive pH‐responsive drug release when the pH changes from 7.4 to 5.0. The in vitro cytotoxicity to Hela cells indicates that the doxorubicin (DOX)‐loaded micelles have similar anticancer activity to the pristine DOX. The combination of excellent micelle stability, high drug‐loading, sensitive pH response, and good anticancer activity endows the copolymers with promising application in drug control delivery for anticancer therapy.     

Non-invasive temperature imaging with thulium 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetramethyl-1,4,7,10-tetraacetic acid (TmDOTMA-)

Non-invasive thermometry using hyperfine-shifted MR signals from paramagnetic lanthanide complexes has attracted attention recently because the chemical shifts of these complexes are many times more sensitive to temperature than the water 1H signal. Among all the lanthanide complexes examined thus far, thulium tetramethyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetate (TmDOTMA-) appears to be the most suitable for MR thermometry. In this paper, the feasibility of imaging the methyl 1H signal from TmDOTMA- using a frequency-selective radiofrequency excitation pulse and chemical shift-selective (CHESS) water suppression is demonstrated. A temperature imaging method using a phase-sensitive spin-echo imaging sequence was validated in phantom experiments. A comparison of regional temperature changes measured with fiber-optic probes and the temperatures calculated from the phase shift near each probe showed that the accuracy of imaging the temperature with TmDOTMA- is at least 0.1-0.2 degrees C. The feasibility of imaging temperature changes in an intact rat at 0.5-0.6 mmol/kg dose in only a few minutes is demonstrated. Similar to commonly used MRI contrast agents, the lanthanide complex does not cross the blood-brain barrier. TmDOTMA- may prove useful for temperature imaging in many biomedical applications but further studies relating to acceptable dose and signal-to-noise ratio are necessary before clinical applications.     

Heterofunctionalized Multiarm Star Polymers via Sequential Thiol‐para‐Fluoro and Thiol‐Ene Double “Click” Reactions

The successful postfunctionalization of multiarm star polystyrene (PS) with pentafluorophenyl and allyl moieties at the periphery is demonstrated employing modular thiol‐para‐fluoro and photoinduced radical thiol‐ene double “click” reactions, respectively. α‐Fluoro and α‐allyl functionalized PS (α‐fluoro‐PS and α‐allyl‐PS) are in situ prepared by atom transfer radical polymerization of styrene and their mixture is used as macroinitiator in a crosslinking reaction with divinyl benzene (DVB) yielding (fluoro‐PS)_m–polyDVB–(allyl‐PS)_m multiarm star polymer. It is found that the multiarm star polymer includes nearly identical number of arms possessing pentafluorophenyl and allyl moieties at the periphery. The obtained multiarm star polymer is then reacted with 1‐propanethiol through thiol‐para‐fluoro “click” reaction to give (propyl‐PS)_m–polyDVB–(allyl‐PS)_m multiarm star polymer, which is subsequently reacted with N‐acetyl‐l ‐cysteine methyl ester via radical thiol‐ene “click” reaction in order to give well‐defined heterofunctionalized (propyl‐PS)_m–polyDVB–(cysteine‐PS)_m multiarm star polymer, with higher molecular weight and narrow molecular weight distribution. Multiarm star polymers are characterized by using viscotek triple detection gel permeation chromatography, ¹H, and ¹⁹F NMR.

     

pH-sensitive micelles self-assembled from multi-arm star triblock co-polymers poly(ε-caprolactone)-b-poly(2-(diethylamino)ethyl methacrylate)-b-poly(poly(ethylene glycol) methyl ether methacrylate) for controlled anticancer drug delivery

A series of amphiphilic 4- and 6-armed star triblock co-polymers poly(ε-caprolactone)-b-poly(2-(diethylamino)ethyl methacrylate)-b-poly(poly(ethylene glycol) methyl ether methacrylate) (4/6AS-PCL-b-PDEAEMA-b-PPEGMA) were developed by a combination of ring opening polymerization and continuous activators regenerated by electron transfer atom transfer radical polymerization. The critical micelle concentration values of the star co-polymers in aqueous solution were extremely low (2.2–4.0 mg l^–1), depending on the architecture of the co-polymers. The self-assembled blank and doxorubicin (DOX)-loaded three layer micelles were spherical in shape with an average size of 60–220 nm determined by scanning electron microscopy and dynamic light scattering. The in vitro release behavior of DOX from the three layer micelles exhibited pH-dependent properties. The DOX release rate was significantly accelerated by decreasing the pH from 7.4 to 5.0, due to swelling of the micelles at lower pH values caused by the protonation of tertiary amine groups in DEAEMA in the middle layer of the micelles. The in vitro cytotoxicity of DOX-loaded micelles to HepG2 cells suggested that the 4/6AS-PCL-b-PDEAEMA-b-PPEGMA micelles could provide equivalent or even enhanced anticancer activity and bioavailability of DOX and thus a lower dosage is sufficient for the same therapeutic efficacy. The results demonstrate that the pH-sensitive multilayer micelles could have great potential application in delivering hydrophobic anticancer drugs for improved cancer therapy.     

N‐Isopropylacrylamide/2‐Hydroxyethyl Methacrylate Star Diblock Copolymers: Synthesis and Thermoresponsive Behavior

Summary: Tri‐arm star diblock copolymers, poly(2‐hydroxyethyl methacrylate)‐block‐poly(N‐isopropylacrylamide) [P(HEMA‐b‐NIPAAm)] with PHEMA and PNIPAAm as separate inner and outer blocks were synthesized via a two‐step ATRP at room temperature. The formation, molecular weight and distribution of polymers were examined, and the kinetics of the reaction was monitored. The PDI of PHEMA was shown to be lower, indicating well‐controlled polymerization of trifunctional macro‐initiator and resultant star copolymers. The thermoresponsive behavior of diblock copolymer aqueous solution were studied by DSC, phase diagrams, temperature‐variable ¹H NMR, TEM and DLS. The results revealed that introducing a higher ratio of HEMA into copolymers could facilitate the formation of micelles and the occurrence of phase transition at lower temperatures. TEM images showed that I‐(HEMA₄₀‐NIPAAm₃₂₀)₃ solutions developed into core‐shell micelles with diameters of approximately 100 nm. I‐(HEMA₄₀‐NIPAAm₃₂₀)₃ was used as a representative example to elucidate the mechanism underlying temperature‐induced phase transition of copolymer solution. In this study we proposed a three‐stage transition process: (1) separately dispersed micelles state at ≈17–22 °C; (2) aggregation and fusion of micelles at ≈22–29 °C; (3) sol‐gel transition of PNIPAAm segments at ≈29–35 °C, and serious syneresis of shell layers.

Molecular architecture of Poly(HEMA‐b‐NIPAAm).     

Dendritic‐Linear Hybrid Multiarm Star Polymers: A Straightforward Synthesis of Polymer as Molecular Nanoparticles

Synthesis of multiarm star polymers via “core first” method but possibly through two different chain growth fashions has been described. Two distinct styrenyl‐TEMPO‐based G3 and G4 dendritic unimolecular initiators have been used for this method. Polymerization of styrene using these core‐cum‐initiators at 125 °C varying the monomer to initiator ratio and polymerization time yields multiarm star polymers with molecular weight (M_w) in the range of 1.71 × 10⁵ to 4.75 × 10⁵ g mol^?1 and polydispersity in the range of 1.34–1.46. Hydrolysis leading to degradation of inner polyurethane core yields highly narrow dispersed—PDI 1.00 to 1.04—polystyrene chains, and the SEC‐MALLS data of these chains confirm the accurate control on predetermination in the number of arms up to 48 of star polymers. The specific refractive index increment (dn/dc) of the polymers is found to be decreased with decreasing weight fraction of core. The transmission electron microscope (TEM) and atomic force microscopy (AFM) images and hydrodynamic radius of chosen polymers confirm the two different chain growth fashions leading to the formation of star polymers as discrete nanoparticle in the case of initiator in which TEMPO is anchored and formation of peripherally low entangled short chains in the case of initiators in which TEMPO is end‐capped.

     

Cooperative Entrapment of Xanthene Dyes by a Core‐Engineered Unimolecular Micelle

The cooperative entrapment of a specified guest is only available for a well‐defined host. Here it is reported that a common host conducts cooperative entrapment of guests. Alkylation of a hyperbranched polyethylenimine (PEI) by epoxy poly(ethylene glycol) monomethyl ethers (PEG1) leads to a water‐soluble PEI@PEG1 ( H1 ). The multifunctional core of H1 is modified to result in H2 – H4, with different polarities and ionic charges. H1 – H4 exist as unimolecular micelles, and can effectively entrap dyes of rose bengal (RB) or eosin Y (EY). Experiments indicate that the guest dyes are exclusively accommodated in the cores of H1 – H4 . The encapsulation proceeds in a cooperative manner, as analysis by the Hill equation (n > 1). It is found that the cooperativity stems from the enhanced π–π stacking of the dyes upon encapsulation, and a polar and ionic environment favors the cooperativity. This is the first example of a cooperative entrapment being realized by a common host.

     

Free radical “grafting from” hyperbranched polyesters based on polymeric azo initiators

Aromatic and aliphatic hyperbranched polyesters were prepared by AB₂ polycondensation process. The highly branched, functional structure of these polymers leads to excellent solubility in combination with low solution viscosities. Varied numbers of the functional groups of the hyperbranched structures were modified with azo functions which are able to initiate free radical polymerization. An increase in temperature in the presence of the vinyl monomers methyl methacrylate (MMA), butyl methacrylate (BMA), styrene (S), or acrylamide (AA) results in “grafting from” the hyperbranched structure. Using this method several graft products were synthesized with variations in structure, number, and size of the graft arms. Gel-permeation chromatography (GPC) with universal calibration and viscosity measurements indicate a strong influence of the hyperbranched core on the properties of the graft product. It was possible to control the phase behavior of the graft products from two phases to homogeneous by the ratio hyperbranched polyester: grafted monomer. The film forming properties which are very poor for unmodified hyperbranched polyester were improved by grafting with linear polymer chains.     

Co-delivery of doxorubicin and tumor-suppressing p53 gene using a POSS-based star-shaped polymer for cancer therapy

In this work, a star-shaped polymer consisting of a cationic poly[2-(dimethylamino) ethyl methacrylate] (PDMAEMA) shell and a zwitterionic poly[N-(3-(methacryloylamino) propyl)-N,N-dimethyl-N-(3-sulfopropyl) ammonium hydroxide] (PMPD) corona was grafted from a polyhedral oligomeric silsesquioxanes (POSS)-based initiator via atomic transfer radical polymerization (ATRP). The reported star-shaped polymer could form stable micelles in aqueous solutions even in the presence of serum. In addition, anti-cancer drug doxorubicin and tumor-suppressing p53 gene were loaded in the process of micelle formation. The formed polyplex was biocompatible and highly efficient for both drug and gene delivery. Furthermore, the polyplex was able to cause a high apoptotic rate of tumor cells both in vitro and in vivo. This combination delivery strategy offers a promising method for cancer therapy and can be used for further clinical applications.     

Synthesis of Hyperbranched Polymers via Metal‐Free ATRP in Solution and Microemulsion

Atom transfer radical polymerization (ATRP), as one of the most successful controlled radical polymerization techniques, has been broadly used by polymer chemists and nonspecialists for synthesis of various functional materials, although the use of copper as traditional catalyst often results in undesired color or properties. The first homopolymerization of an initiable monomer, that is, inimer, is reported via metal‐free ATRP using 10‐phenylphenothiazine (Ph‐PTH) as photocatalyst in both solution and microemulsion media. Although polymerizations of inimers in both media can be carried out, only the microemulsion polymerization of methacrylate‐based inimer 1 effectively confines the random bimolecular reaction within each segregated latex and produces hyperbranched polymers with high molecular weight and low polydispersity. Several experimental parameters in the microemulsion polymerization of inimer 1 are subsequently studied, including the Ph‐PTH amount, the solids content of microemulsion, and the light source of irradiation. The results not only provide an effective method to tune the structure and molecular weights of hyperbranched polymers in confined‐space polymerization, but also expand the toolbox of using metal‐free ATRP method for synthesizing highly branched polymers in controlled manner.     

Folate-functionalized polymeric micelle as hepatic carcinoma-targeted,MRI-ultrasensitive delivery system of antitumor drugs

Targeted delivery is a highly desirable strategy to improve the diagnostic imaging and therapeutic outcome because of enhanced efficacy and reduced toxicity. In the current research, anticancer drug doxorubicin (DOX) and contrast agent for magnetic resonance imaging (MRI), herein superparamagnetic ion oxide Fe(3)O(4) (SPIO), were accommodated in the core of micelles self-assembled from amphiphilic block copolymer of poly(ethylene glycol) (PEG) and poly(varepsilon-caprolactone) (PCL) with a targeting ligand (folate) attached to the distal ends of PEG (Folate-PEG-PCL). The in vitro tumor cell targeting efficacy of these folate functionalized and DOX/SPIO-loaded micelles (Folate-SPIO-DOX-Micelles) was evaluated upon observing cellular uptake of micelles by human hepatic carcinoma cells (Bel 7402 cells) which overexpresses surface receptors for folic acid. In the Prussian blue staining experiments, cells incubated with Folate-SPIO-DOX-Micelles showed much higher intracellular iron density than the cells incubated with the folate-free SPIO-DOX-Micelles. According to the flow cytometry data, cellular DOX uptake observed for the folate targeting micelle was about 2.5 fold higher than that for the non-targeting group. Furthermore, MTT assay showed that Folate-SPIO-DOX-Micelles effectively inhibited cell proliferation, while the folate-free SPIO-DOX-Micelles did not show the same feat at comparable DOX concentrations. The potential of Folate-SPIO-DOX-Micelle as a novel MRI-visible nanomedicine platform was assessed with a 1.5 T clinical MRI scanner. The acquired MRI T (2) signal intensity of cells treated with the folate targeting micelles decreased significantly. By contrast, T (2) signal did not show obvious decrease for cells treated with the folate-free micelles. Our results indicate that the multifunctional polymeric micelles, Folate-SPIO-DOX-Micelles, have better targeting tropism to the hepatic carcinoma cells in vitro than their non-targeting counterparts, and the cell targeting events of micelles can be monitored using a clinical MRI scanner.