Accuracy of Le Fort I osteotomy in bimaxillary splint-based orthognathic surgery: focus on posterior maxillary movements

This retrospective study was performed to verify the accuracy of horizontal and vertical repositioning of the maxilla in bimaxillary osteotomy with a focus on posterior vertical displacement. Data from 39 orthognathic patients undergoing bimaxillary surgery including a one-piece Le Fort I osteotomy with pitch rotation and advancement at the University Hospitals of Leuven (Belgium), between January 2015 and April 2016, were included in the study. Preoperative and 1-week postoperative lateral cephalograms were digitized and imported into cephalometric software. Horizontal and vertical measurements of dental landmarks were used to assess the accuracy of maxillary repositioning, and errors were reported in terms of the mean and absolute mean. The horizontal advancements were randomly under- and over-corrected an average of 1.4 mm ± 1.2 mm. Vertical repositioning of the anterior maxilla followed the planning. A tendency for under-correction was found for posterior vertical intrusion of the maxilla. The same tendency towards under-correction of posterior maxillary inferior repositioning was detected when planned movements were greater than 3 mm. For all studied groups, no significant difference was found between the planning and the results achieved, validating the use of intermediate splints.     

Precision of maxillary repositioning during orthognathic surgery: A prospective study

The purpose of this study was to evaluate the accuracy of surgical splints and an external reference point to reposition the maxilla during orthognathic surgery. Before surgery, a radiological marker was inserted inside the orthodontic bracket of the first right maxillary molar. A surgical splint was utilized to reposition the maxilla in the sagittal and coronal planes after the osteotomy. The vertical position was established by measuring the distance between a Kirschner wire inserted at bony nasion and the orthodontic wire. Preoperative and postoperative cephalometric radiographs were obtained and manually traced. The radiological marker and the tip of the right maxillary incisor were used as specific landmarks. Their displacement on the pre- and postoperative radiographs was measured. The actual surgical movement of the maxilla was compared to the initial surgical planning. 23 patients met the inclusion criteria to participate in the study. The mean difference between the planned and executed movements of the maxilla was 0.1 mm (p = 0.71). The difference was not statistically significant for any given movements of the maxilla. The use of surgical splints made from model surgery combined with an external reference point at bony nasion is accurate methods for repositioning the maxilla during orthognathic surgery.     

Does a learning curve exist for accuracy in three-dimensional planning for maxillary positioning in bimaxillary orthognathic surgery?

The purpose of this study was to investigate the influence of time, and experience, on the accuracy of maxillary repositioning in bimaxillary orthognathic surgery performed using virtual surgical planning (VSP). Patients who had undergone bimaxillary orthognathic surgery were reviewed. Maxillary position on pre- and postoperative computed tomography scans was compared. The patients were divided into groups according to the year in which VSP was performed and surgery completed. Linear distances between upper jaw reference landmarks were measured in all three planes of space to determine accuracy between the preoperative VSP and the surgical outcome at various time points. One hundred subjects met the eligibility criteria for assessment and were allocated to groups: 2013 (n = 10), 2014 (n = 17), 2015 (n = 39), 2016 (n = 20), and 2017 (n = 14). Overall, the results demonstrated improved precision in maxillary position over the years, with more accurate results in patients who underwent surgery in 2015, 2016, and 2017. Mean linear differences between planned and obtained results demonstrated more accurate results in the horizontal direction, followed by transverse and vertical directions. An overall average difference within 1 mm was observed for 51.3% of the measurements included in the sample group. Time, and surgeon experience, can influence the accuracy of maxillary positioning in bimaxillary orthognathic surgery.     

Accuracy of maxillary repositioning surgery using CAD/CAM customized surgical guides and fixation plates

The advent of three-dimensional imaging and computer-aided surgical simulation (CASS) have brought about a paradigm shift in surgical planning. The aim of this study was to assess the accuracy of maxillary repositioning surgery using computer-aided design and manufacturing (CAD/CAM) customized titanium surgical guides and fixation plates. Thirty consecutive adult patients, 13 male and 17 female, with a mean age of 29.2 years and 25.5 years, respectively, requiring Le Fort I maxillary osteotomy, with or without simultaneous mandibular surgery, were evaluated retrospectively. All orthognathic surgeries were performed by one experienced surgeon. The pre-surgical and post-surgical volumetric imaging were superimposed to assess the linear and angular differences between the planned and actual positions of the maxilla following surgery. With the use of the CAD/CAM titanium surgical guides and fixation plates, all surgical movements were within 2 mm and 4° of the planned movements, which is considered clinically insignificant. The overall root mean square error between the planned and actual surgical movements was 0.38 mm in the transverse dimension, 0.64 mm in the anteroposterior dimension, and 0.55 mm in the vertical dimension. In regard to the centroid of the maxilla, the absolute angular difference of the maxillary centroid was 1.06° in pitch, 0.47° in roll, and 0.49° in yaw. Maxillary repositioning surgery can be performed with high accuracy using CAD/CAM titanium surgical guides and fixation plates.     

Accuracy of maxillary repositioning in two-jaw surgery with conventional articulator model surgery versus virtual model surgery

The purpose of this study was to compare the accuracy of maxillary repositioning using the recently introduced computerized virtual model surgery (VMS) with conventional articulator model surgery (AMS). Forty-two patients who had undergone bimaxillary surgery were investigated retrospectively in this study. The patients were divided into two groups: conventional AMS (n = 23) and VMS (n = 19) for intermediate splint fabrication in maxillary positioning. Planned surgical movements and actual postsurgical changes of the lateral and frontal cephalometric measurements were compared. Although variations from the planned surgical movements were relatively small, both methods had statistically significant errors in some of the linear measurements. Both groups had a similar range of errors. The overall absolute mean discrepancy between the planned and actual surgical movements for the linear measurements was 1.17 mm (0–3.6 mm) in AMS and 0.95 mm (0–3.2 mm) in VMS. Of the total measurements, measurements reflecting a surgical discrepancy of more than 2 mm or 2° comprised 12.0% of the cases in AMS and 7.9% in VMS. The surgical accuracy of maxillary positioning with VMS was comparable to conventional AMS. Because VMS has the definitive advantage of eliminating the complex laboratory step and shortening the laboratory time, this can be accepted as an alternative to AMS.     

Comparison of three different types of splints and templates for maxilla repositioning in bimaxillary orthognathic surgery: a randomized controlled trial

The selection and implementation of a plan for maxillary surgery is of the utmost importance in achieving the desired outcome for the patient undergoing two-jaw orthognathic surgery. Some splint-based and splintless methods, accompanied by computer-assisted techniques, are helpful in improving surgical plan implementation. However, randomized controlled trials focused on this procedure are lacking. This study included 61 patients who underwent bimaxillary surgeries. The patients were randomly assigned to a conventional resin occlusal splint (CROS) group, a digital occlusal splint (DOS) group, or a digital templates (DT) group, in a 1:1:1 ratio. The mean linear distance between the planned and actual postoperative positions of eight selected points on the surfaces of the maxillary teeth was selected as the outcome measure. The distance was significantly smaller in the DT group (1.17 ± 0.66 mm) when compared to both the CROS group (2.55 ± 0.95 mm, P < 0.05) and DOS group (2.15 ± 1.12 mm, P < 0.05). However, the difference between the CROS group and DOS group was not statistically significant. These findings indicate that using digital templates results in the best performance in transferring the surgical plan to the operation environment as compared to the other two types of splints. This suggests that the application of digital templates could provide a reliable treatment option.     

Comparison of the accuracy of maxillary position between conventional model surgery and virtual surgical planning

The aim of this study was to determine whether virtual surgical planning (VSP) is an accurate method for positioning the maxilla when compared to conventional articulator model surgery (CMS), through the superimposition of computed tomography (CT) images. This retrospective study included the records of 30 adult patients submitted to bimaxillary orthognathic surgery. Two groups were created according to the treatment planning performed: CMS and VSP. The treatment planning protocol was the same for all patients. Pre- and postoperative CT images were superimposed and the linear distances between upper jaw reference points were measured. Measurements were then compared to the treatment planning, and the difference in accuracy between CMS and VSP was determined using the t-test for independent samples. The success criterion adopted was a mean linear difference of <2 mm. The mean linear difference between planned and obtained movements for CMS was 1.27 ± 1.05 mm, and for VSP was 1.20 ± 1.08 mm. With CMS, 80% of overlapping reference points had a difference of <2 mm, while for VSP this value was 83.6%. There was no statistically significant difference between the two techniques regarding accuracy (P > 0.05).     

Accuracy of mandible-independent maxillary repositioning using pre-bent locking plates: a pilot study

The double splint method is considered the gold standard for maxillary repositioning, but the procedure is lengthy and prone to error. Recent splintless methods have shown high repositioning accuracy; however, high costs and technical demands make them inaccessible to many patients. Therefore, a new cost-effective method of mandible-independent maxillary repositioning using pre-bent locking plates is proposed. Plates are bent on maxillary models in the planned position prior to surgery. The locations of the plate holes are replicated during surgery using osteotomy guides made from thermoplastic resin sheets. Pre-bent plates are subsequently fitted onto the maxilla, and plate holes are properly set to reposition the maxilla. The purpose of this study was to evaluate the accuracy of this method for maxillary repositioning and the reproducibility of the plate holes. Fifteen orthognathic surgery patients were evaluated retrospectively by superimposing preoperative simulations over their postoperative computed tomography models. The median deviations in maxillary repositioning and plate hole positioning between the preoperative plan and postoperative results were 0.43 mm (range 0–1.55 mm) and 0.33 mm (range 0–1.86 mm), respectively. There was no significant correlation between these deviations, suggesting that the method presented here allows highly accurate and reliable mandible-independent maxillary repositioning.     

Splintless orthognathic surgery in edentulous patients—a pilot study

The aim of this pilot study was to evaluate the accuracy and predictability of a splintless treatment protocol for edentulous patients undergoing orthognathic surgery in four consecutive cases. All operations were virtually planned, followed by computer-aided design of individual osteotomy guides and patient-specific fixation implants, which were three-dimensionally printed in titanium. In order to evaluate the discrepancy between the planned and the achieved postoperative result, the postoperative outcome was compared to the virtual treatment plan. Rotational and translational movement and discrepancies with the planned movements were quantified for the maxilla; the advancement was quantified for the mandible. For the maxilla, there was a mean translation discrepancy of 0.6 mm. With regard to rotation, there was a mean discrepancy of 1.9°, 0.1°, and 0.4° for pitch, yaw, and roll, respectively. The mean discrepancy in translation of the mandible was 0.4 mm. The results of this pilot study indicate that the splintless treatment protocol for orthognathic surgery in edentulous patients presented here is accurate and predictable.     

Assessment of condylar changes after orthognathic surgery using computed tomography regional superimposition

This study aimed to investigate the effects of bimaxillary advancement orthognathic surgery on the condylar remodeling of the temporomandibular joint (TMJ) using voxel-based regional superimposition of cone-beam computed tomography (CBCT).In this retrospective study, the sample comprised 56 condyles from 28 healthy patients (aged from 16 to 50 years) with mandibular retrognathism treated with bimaxillary advancement. CBCT scans were taken preoperatively and at 14.3 ± 4.2 months postoperatively. The scans at the two time points were superimposed using regional voxel-based registration to assess condylar changes in the follow-up period. The linear alterations were measured in six different areas of each condyle to determine the pattern of condylar remodeling.Although no significant correlation was observed between changes in condylar surfaces, bone resorption occurred predominantly in the posterior and superior regions, while bone formation was predominantly on the anterior surface. Medial and lateral surfaces presented fewer bone changes. The overall bone changes were smaller than 1 mm bilaterally in 21 patients (75%) and, considering each condyle individually, were smaller than 1 mm in 48 condyles (85.7%).The results suggested that mild condylar remodeling in healthy patients is a common finding after orthognathic surgery. Future studies may clarify the mechanisms involved in the remodeling and help to understand the reasons for the remodeling pattern.     

Splintless surgery using patient-specific osteosynthesis in Le Fort I osteotomies: a randomized controlled multi-centre trial

The accuracy of orthognathic surgery has improved with three-dimensional virtual planning. The translation of the planning to the surgical result is reported to vary by >2 mm. The aim of this randomized controlled multi-centre trial was to determine whether the use of splintless patient-specific osteosynthesis can improve the accuracy of maxillary translation. Patients requiring a Le Fort I osteotomy were included in the trial. The intervention group was treated using patient-specific osteosynthesis and the control group with conventional osteosynthesis and splint-based positioning. Fifty-eight patients completed the study protocol, 27 in the patient-specific osteosynthesis group and 31 in the control group. The per protocol median anteroposterior deviation was found to be 1.05 mm (interquartile range (IQR) 0.45–2.72 mm) in the patient-specific osteosynthesis group and 1.74 mm (IQR 1.02–3.02 mm) in the control group. The cranial–caudal deviation was 0.87 mm (IQR 0.49–1.44 mm) and 0.98 mm (IQR 0.28–2.10 mm), respectively, whereas the left–right translation deviation was 0.46 mm (IQR 0.19–0.96 mm) in the patient-specific osteosynthesis group and 1.07 mm (IQR 0.62–1.55 mm) in the control group. The splintless patient-specific osteosynthesis method improves the accuracy of maxillary translations in orthognathic surgery and is clinically relevant for planned anteroposterior translations of more than 3.70 mm.     

Posterior maxillary alveolar vertical distraction osteogenesis by bi-directional distractor

A patient with severe posterior maxillary hypoplasia was simulated using a 3-dimensional model by rapid prototyping, and segmental vertical distraction osteogenesis was planned to advance the posterior maxillary segment. The bi-directional distractor was adapted to the alveolar ridge and zygomatic buttress. After a 7-day latency period, we started distraction at a rate of 0.35 mm every 12 h. 12 mm of advancement of the posterior maxillary segment was achieved. This distraction osteogenesis using a bi-directional distractor with proper therapeutic planning and good surgical technique will help ensure adequate vector control to predictably regenerate the hard and soft tissues during alveolar distraction.     

Orthognathic treatment with maxillary and mandibular anterior segmental osteotomy

This case report presents a case that underwent orthognathic treatment with anterior segmental osteotomies on both jaws. The patient was a 26-year-old female with maxillary protrusion, lip incompetence with an everted vermilion border. The overbite was +1.0 mm, overjet +1.0 mm. The pre-surgical orthodontic treatment included the extraction of the four first premolars and a multi-bracket treatment was started. After 12 months of pre-surgical orthodontic treatment, both the anterior maxillary and the anterior mandibular segments were retracted surgically by 5.5 mm. The total treatment period was 18 months. An anterior segmental osteotomy can induce the remarkable structural changes for bimaxillary lip protrusion patients.     

Two-point nasomaxillary fixation of the Le Fort I osteotomy: assessment of stability at one year postoperative

The purpose was to assess maxillary position among patients undergoing Le Fort I maxillary advancement with internal fixation placed only at the nasomaxillary buttresses. This was a retrospective study of patients undergoing a Le Fort I osteotomy for maxillary advancement, with internal fixation placed only at the nasomaxillary buttresses. Demographic and cephalometric measures were recorded. The outcome of interest was the change in maxillary position between immediately postoperative (T1), 6 weeks postoperative (T2), and 1 year postoperative (T3). Fifty-eight patients were included as study subjects (32 male, 26 female; mean age 18.4 ± 1.8 years). Twenty-five subjects (43.1%) had a diagnosis of cleft lip and palate. Forty-three subjects (74.1%) had bimaxillary surgery, 16 (27.6%) had bone grafts, and 18 (31.0%) had segmental maxillary osteotomies. At T3, there were no subjects with non-union, malunion, malocclusion, or relapse requiring repeat surgery. Mean linear changes between T1 and T3 were ≤1 mm. Mean angular changes between T1 and T3 were <1°. There was no significant difference in stability in multi-segment maxillary osteotomies (P =  0.22) or with bone grafting (P =  0.31). In conclusion, anterior fixation alone in the Le Fort I osteotomy results in a stable maxillary position at 1 year postoperative.     

One-year assessment of surgical outcomes in Class III patients using cone beam computed tomography

The purpose of this study was to apply a novel method to evaluate surgical outcomes at 1 year after orthognathic surgery for Class III patients undergoing two different surgical protocols. Fifty patients divided equally into two groups (maxillary advancement only and combined with mandibular setback) had cone beam computed tomography (CBCT) scans taken pre-surgery, at splint removal, and at 1-year post-surgery. An automatic cranial base superimposition method was used to register, and shape correspondence was applied to assess, the overall changes between pre-surgery and splint removal (surgical changes) and between splint removal and 1-year post-surgery at the end of orthodontic treatment (post-surgical adaptations). Post-surgical maxillary adaptations were exactly the same for both groups, with 52% of the patients having changes >2 mm. Approximately half of the post-surgical changes in the maxilla for both groups were vertical. The two-jaw group showed significantly greater surgical and post-surgical changes in the ramus, chin, and most of the condylar surfaces (P < 0.05). Post-surgical adaptation on the anterior part of the chin was also more significant in the two-jaw group (P < 0.05). Regardless of the type of surgery, marked post-surgical adaptations were observed in the regions evaluated, which explain the adequate maxillary–mandibular relationship at 1-year post-surgery on average, with individual variability.     

Comprehensive analysis of soft tissue changes in response to orthognathic surgery: mandibular versus bimaxillary advancement

This study was performed to compare soft tissue changes in response to mandibular and bimaxillary advancement osteotomy. Preoperative and postoperative cone beam computed tomography scans of 24 cases were analysed: 12 underwent bimaxillary advancement and 12 underwent mandibular advancement. The skeletal surgical movements were measured and soft tissue changes were displayed on a three-dimensional colour map. The intensity and shade of the colour indicated the magnitude and direction of the changes. In the bimaxillary advancement group, maxillary advancement was 5.5 ± 2.7 mm with anterior vertical impaction of 2.7 ± 2.5 mm; mandibular advancement was 4.6 ± 3.2 mm. Most of the mediolateral soft tissue changes were limited to the anatomical boundaries of the paranasal region – the columella together with the alar bases of the nose; these showed clear forward movement, which extended to involve most of the cheeks. In the mandibular surgery group, the mean advancement was 3.5 ± 2.6 mm. The chin region, lower lip, and inferior parts of the cheek showed forward shift with minimal changes at the vermilion border, which was only displaced in an upward direction. In conclusion, dense anatomical correspondence is a clinically meaningful method of producing a visual comprehensive analysis of the changes in response to orthognathic surgery.     

Maxillo-mandibular counter-clockwise rotation and mandibular advancement with TMJ Concepts® total joint prostheses: Part I - Skeletal and dental stability

The purpose of this study was to evaluate skeletal and dental stability in patients who had temporomandibular joint (TMJ) reconstruction and mandibular counterclockwise advancement using TMJ Concepts total joint prostheses (TMJ Concepts Inc. Ventura, CA) with maxillary osteotomies being performed at the same operation. All patients were operated at Baylor University Medical Center, Dallas TX, USA, by one surgeon (Wolford). Forty-seven females were studied; the average post-surgical follow-up was 40.6 months. Lateral cephalograms were analyzed to estimate surgical and post-surgical changes. During surgery, the occlusal plane angle decreased 14.9 ± 8.0°. The maxilla moved forward and upward. The posterior nasal spine moved downward and forward. The mandible advanced 7.9 ± 3.5 mm at the lower incisor tips, 12.4 ± 5.4 mm at Point B, 17.3 ± 7.0 mm at menton, 18.4 ± 8.5 mm at pogonion, and 11.0 ± 5.3 mm at gonion. Vertically, the lower incisors moved upward ?2.9 ± 4.0 mm. At the longest follow-up post surgery, the maxilla showed minor horizontal changes while all mandibular measurements remained stable. TMJ reconstruction and mandibular advancement with TMJ Concepts total joint prosthesis in conjunction with maxillary osteotomies for counter-clockwise rotation of the maxillo-mandibular complex was a stable procedure for these patients at the longest follow-up.     

Bimaxillary protrusion trait in the Indian population: A cephalometric study of the morphological features and treatment considerations

PurposeThe orthodontic literature is discordant with the diagnosis of bimaxillary protrusion with no single anatomic answer and the anomaly has been referred in the literature with protean characteristics. The trait denotes a particular facial configuration and its cephalometric representation in certain ethnic and racial groups revealed a mixed pattern with individual variations. The present study was aimed at analyzing the dento-skeletal characteristics of bimaxillary protrusion in a sample of Indian men and women.Materials and methodsForty-six Indian subjects (28 women and 18 men; 19 ± 3.6 years of age) with Class I malocclusion and interincisal angle ≤110°, who attended orthodontic clinics for a comprehensive fixed orthodontic treatment were included for the study. The lateral films were hand traced and 27 parameters were measured. The data were imported to SPSS version 13 US package and statistical manipulation included means, standard deviation, and coefficient of variation (%). Male and female data were compared by Student's t-test (unpaired). Correlation and regression analysis were performed to assess any relationship between different parameters.ResultsThere was a marked increase in proclination of the maxillary incisors both to the maxillary plane (125.3 ± 5.7°), the NA line (35.1 ± 5.0°) and to sella–nasion (117.7 ± 5.5°). The positional relationship of the mandible to the maxilla with reference to the cranial base was within the normal limits (ANB = 3.1 ± 1.3°) and the skeletal pattern was Class I. The effective lengths of maxilla and mandible did not correlate significantly with sagittal skeletal discrepancy.ConclusionUnlike in other ethnic and racial groups, bimaxillary protrusion in Indian subjects is likely a bidental protrusion over normal dento-alveolar bases. The skeletal characteristics suggested a normal relationship of the functional components of the face. The condition could be treated successfully with orthodontic mechanotherapy alone.     

Postoperative stability of conventional bimaxillary surgery compared with maxillary impaction surgery with mandibular autorotation for patients with skeletal class II retrognathia

We aimed to compare the postoperative stability of conventional bimaxillary surgery (with bilateral sagittal split osteotomy) with that of maxillary impaction surgery (with mandibular autorotation without bilateral sagittal split osteotomy) in patients with skeletal class II retrognathia. Patients were assigned to have conventional bimaxillary surgery (conventional group, n = 6) or mandibular autorotation (experimental group, n = 7). Measurements were made using serial lateral cephalometric radiographs taken immediately preoperatively (T0), immediately postoperatively (T1), and one year later (T2) to assess the variation in operative change (T1-T0) and relapse (T2-T1). There was no significant difference in median (range) surgical change in the anterior movement at point B (conventional group, 4.5 (3.0–11.0) mm; experimental group 4.1 (2.1–6.4) mm). However, there was a significant difference in median (range) surgical posterior movement relapse at point B (conventional group −1.7 (−2.3 to −0.5) mm; experimental group −0.6 (−1.0 to 1.0) mm; p = 0.032). Mandibular advancement with mandibular autorotation is therefore a more stable procedure than mandibular advancement with bilateral sagittal split osteotomy in patients with skeletal class II retrognathia.     

Volumetric changes of the upper airway following maxillary and mandibular advancement using cone beam computed tomography

The objective of this project was to retrospectively evaluate changes in volume of different compartments of the upper airway in response to maxillary, mandibular, and bimaxillary advancement surgeries and to predict the extent of volumetric changes associated with these surgical movements. Pre- and post-surgical cone beam computed tomography scans of 36 patients were evaluated for changes in nasal cavity, nasopharyngeal, oropharyngeal, and hypopharyngeal compartments. The amount of movement for each surgery was measured from skeletal landmarks to reference planes and was correlated with volumetric changes. Maxillary advancement of 4.0 ± 2.2 mm increased the oropharyngeal volume significantly (41.40%), and mandibular advancement of 3.8 ± 1.6 mm also significantly increased the oropharyngeal volume (21.17%). Bimaxillary advancement of 5.1 ± 1.3 mm for the maxilla and 6.4 ± 3.1 mm for the mandible significantly increased nasopharyngeal (27.45%), oropharyngeal (66.39%), and hypopharyngeal (52.48%) volumes. Furthermore, for every millimeter anterior movement, oropharyngeal volume increased by 2319.2 ± 771.8 mm³. Bimaxillary advancement showed a greater increase than isolated maxillary and mandibular advancement in all pharyngeal compartments. Every millimeter of advancement in the bimaxillary group led to a significant increase in oropharyngeal volume, while every millimeter downward movement showed a significant increase in nasopharyngeal volume.