Poly(3‐hexylthiophene)‐block‐poly(2‐ethyl‐2‐oxazoline) amphiphilic rod–coil diblock copolymers have been synthesized by a combination of Grignard metathesis (GRIM) and ring‐opening cationic polymerization. Diblock copolymers containing 5, 15, and 30 mol‐% poly(2‐ethyl‐2‐oxazoline) have been synthesized and characterized. The synthesized rod–coil block copolymers display nanofibrillar morphology where the density of the nanofibrills is dependent on the concentration of the poly(2‐ethyl‐2‐oxazoline) coil segment. The conductivity of the diblock copolymers was lowered from 200 to 35 S · cm?1 with an increase in the content of the insulating poly(2‐ethyl‐2‐oxazoline) block. By contrast, the field‐effect mobility decreased by 2–3 orders of magnitude upon the incorporation of the poly(2‐ethyl‐2‐oxazoline) insulating segment.
Summary: Poly(ethylene oxide)‐block‐poly(methylidene malonate 2.1.2) block copolymer (PEO‐b‐PMM 2.1.2) bearing an allyl moiety at the poly(ethylene oxide) chain end was synthesized by sequential anionic polymerization of ethylene oxide (EO) and methylidene malonate 2.1.2 (MM 2.1.2). This allyl functional group was subsequently modified by reaction with thiol‐bearing functional groups to generate carboxyl and amino functionalized biodegradable block copolymers. These end‐group reactions, performed in good yields both in organic media and in aqueous micellar solutions, lead to functionalized PEO‐b‐PMM 2.1.2 copolymers which are of interest for cell targeting purposes.
Synthetic route to α‐allyl functionalized PEO‐b‐PMM 2.1.2 copolymers. 相似文献
A polystyrene‐block‐poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double‐gyroid morphology when self‐assembled in the solid state, has been prepared with a PFEMS volume fraction ?PFEMS = 0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal‐containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self‐assembly of the diblock copolymer in the bulk showed a stable, double‐gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Iad space group.
Summary: Single‐walled carbon nanotubes (SWNTs) mechanically dispersed in HEPES buffer were incubated with a dispersion of A‐B‐A block telomers, composed of 2‐methacryloyloxyethyl‐D‐glucopyranoside telomers (A block) and a styrene telomer (B block), which had been prepared by the macroinitiator technique. After the incubation, the polymer‐wrapped SWNT could be stably dispersed in the buffer without any precipitation for several months. The glucose residue above the SWNT was definitely recognized by lectin (Concanavalin A) as proven by the increase in turbidity. Using a similar procedure, a block telomer composed of N‐isopropylacrylamide telomers (A block) and a styrene telomer (B block) could easily be deposited onto the SWNT. A temperature‐responsive aggregation and the subsequent precipitation of the modified SWNT could clearly be observed. The usage of the block‐telomer examined here would be promising for the preparation of stable dispersions of SWNTs with various functions.
Summary: Optically pure (+) and isotactic poly[{methyl(1‐naphthyl)silylene}(o‐phenylene)methylene] terminated with methylphenylchlorosilyl was obtained by the Pt‐catalyzed ring‐opening polymerization of optically pure 1‐methyl‐1‐(1‐naphthyl)‐2,3‐benzosilacyclobut‐2‐ene in the presence of methylphenylchlorosilane as a chain transfer agent. The polymer formed was transformed into a block copolymer by reacting the terminal chlorosilyl group with a commercial poly(ethylene glycol) monomethyl ether. The formation of micelles by the block copolymer in THF‐water mixtures was investigated by fluorescence and UV. More detailed information about the aggregation of the polymer in the micelles was obtained by circular dichroism spectroscopy. It was found that dense aggregates were formed at a concentration higher than the critical micelle concentration. This concentration was higher for lower molecular weight polymer, at higher temperatures, and in more hydrophobic solvent systems. The highly aggregated structure was altered by changing the solvent system.
A novel graft copolymer is synthesized from commercially available poly(vinyl alcohol) using ring‐opening polymerization. For the polymerization reaction of novel brush‐like poly(vinyl alcohol)‐graft‐poly(?‐caprolactone‐co‐(3‐/7‐(prop‐2‐ynyl)oxepan‐2‐one) 5 Sn(Oct)2 is used as a catalyst. The formation of the graft copolymer is confirmed by 1H NMR, 13C NMR, and Fourier transform infrared (FTIR) spectroscopy. Furthermore, the modification of the novel synthesized graft copolymer via a “click” reaction to implement adamantane groups is described. The success of the “click” reaction is proven by 1H NMR spectroscopy and visualized by decomplexation of cyclodextrin with included phenolphthalein.
In the present contribution, we synthesized linear coordination polymers based on oligo(ethylene glycol)s as well as poly(ethylene glycol)s and terpyridine ruthenium(II) complexes. The reaction conditions, e.g., solvent, concentration, were varied to obtain well‐soluble, high molecular weight polymers. The resulting compounds were characterized by UV‐vis and NMR spectroscopy. The viscosity of the materials was also investigated with and without salt addition. Finally, the polymers were characterized with DSC and AFM. AFM revealed a lamellar morphology.
Polymers with narrow molecular weight distributions and controlled architectures were generated by living ring‐opening metathesis polymerization of exo‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboximide. The dicarboximide units have been previously shown to exhibit biological activity, can selectively bind to the nucleic acid base adenine by hydrogen‐bonding, and are readily functionalizable. Block copolymers containing these moieties were generated, and underwent self‐assembly into nanoscale spherical aggregates, with surface localized molecular recognition motifs.
pH‐sensitive micelles formed by interchain hydrogen bonding of poly(methacrylic acid)‐block‐poly(ethylene oxide) copolymers were prepared and investigated at pH < 5. Both and Rh of the micelles increase with decreasing pH of the solution, displaying an asymptotic tendency at low pH values. The observed micelles are well‐defined nanoparticles with narrow size distributions (polydispersity ΔRh/Rh ≤ 0.05) comparable with regular diblock copolymer micelles. The CMCs occur slightly below c = 1 × 10?4 g · mL?1. The micelles are negatively charged and their time stability is lower than that of regular copolymer micelles based purely on hydrophobic interactions.
Radical polymerization of styrene and mixtures of styrene and 4‐vinylpyridine was performed in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) producing polymers with controlled molecular weights and molecular weight distributions. The living nature of these polymers was confirmed by using them as macroinitiators in the block copolymerization of styrene and butyl acrylate. The thermal properties of the synthesized statistical diblock copolymers measured by differential scanning calorimetry indicated that a phase‐separated morphology was exhibited in most of the block copolymers. The results were confirmed by transmission electron microscopy (TEM) and small angle X‐ray scattering (SAXS) showing microphase‐separated morphology as is known for homo A‐B diblock polymers.
SAXS of a block copolymer synthesized from S/V 70:30 macroinitiators (03) with one detected Tg. 相似文献
This study deals with the preparation of polyurethane‐graft‐poly(n‐butyl acrylate)s copolymers by polymerization of diphenyl‐methane‐4,4‐di‐isocyanate (MDI) with α,α′‐di‐hydroxyl‐poly(n‐butyl acrylate)s of different sizes as macromonomers. The polyaddition has been studied on the basis of kinetic measurements, and the comb‐like structure of the resulting polymer has been well‐established. Such grafted copolymers display specific adhesive properties in connection with their comb‐like architecture.
PnBMA is grafted on PVDF using ATRP in NMP solution at 90 °C and characterized by means of 1D and 2D NMR. 19F NMR spectra clearly reveal that the attack occurs on the head‐head >CF2 groups. Cast PB films show a honeycomb‐patterned porous microstructure, and the “breath‐figure” model is used to explain pore formation. FT‐IR spectra suggest a supramolecular interaction between >C?O groups of PnBMA and >CF2 groups of PVDF. Storage modulus, loss modulus and stress at break decrease with graft conversion, but the strain at break increases significantly. The toughness of the copolymers also increases dramatically (882%). The porous materials can be applied as solid‐state electrolytes (Li+‐doped) with good ionic conductivity (10?5 S · cm?1).
A modular synthesis of short chain length and medium chain length poly(3‐hydroxyalkanoate)s‐b‐poly(ethylene glycol) (PHAs‐b‐PEG) diblock copolymers is described. First, length‐controlled oligomers of hydrophobic poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBHV), poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHHx), and poly(3‐hydroxyoctanoate‐co‐hydroxyhexanoate) (PHOHHx) containing a carboxylic acid end group were obtained by thermal treatment, with molar masses ranging from 3 800 to 15 000 g · mol?1. After quantitative functionalization with propargylamine, ligation with azide‐terminated poly(ethylene glycol) of 5 000 g · mol?1 was accomplished using the copper (I) catalyzed azide alkyne cycloaddition (CuAAC). Well‐defined diblock copolymers were obtained up to 93% yield, with molar masses ranging from 9 900 to 23 100 g · mol?1. All products were fully characterized using 1H NMR, COSY, SEC, TGA, and DSC.
Summary: This study describes the chain extension, with polycaprolactone diols, of polyurethane‐graft‐poly(butyl acrylate)s which were first prepared by the step growth polymerization of a mixture of diphenylmethane‐4,4′‐diisocyanate (MDI) and α,α′‐dihydroxyl‐poly(butyl acrylate)s. The success of the chain extension reaction was studied and confirmed by 1H NMR, SEC and DSC analysis. The incorporation of polycaprolactone sequences in the polyurethane chains modified their specific adhesive properties, bringing cohesion to the material, as demonstrated by tack measurements.
The physical properties of well‐defined poly(butyl methacrylate)‐block‐poly(butyl acrylate)‐block‐poly(butyl methacrylate) (PBMA‐b‐PBA‐b‐PBMA) triblock copolymers synthesized by atom transfer radical polymerization (ATRP) are reported. The glass transition and the degradation temperature of copolymers were determined by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC measurements showed phase separation for all of the copolymers with the exception of the one with the shortest length of either inner or outer blocks. TGA demonstrated that the thermal stability of triblock copolymers increased with decreasing BMA content. Dynamic mechanical analysis was used for a preceding evaluation of adhesive properties. In these block copolymers, the deformation process under tension can take place either homogeneously or by a neck formation depending on the molecular weight of the outer BMA blocks and on the length of the inner soft BA segments. Microindentation measurements were also performed for determining the superficial mechanical response and its correlation with the bulk behavior.
Stress‐strain curves for the different PBMA‐b‐PBA‐b‐PBMA specimens at room temperature and at 10 mm/min. 相似文献
We describe the preparation of amphiphilic diblock copolymers made of poly(ethylene oxide) (PEO) and poly(hexyl methacrylate) (PHMA) synthesized by anionic polymerization of ethylene oxide and subsequent atom transfer radical polymerization (ATRP) of hexyl methacrylate (HMA). The first block, PEO, is prepared by anionic polymerization of ethylene oxide in tetrahydrofuran. End capping is achieved by treatment of living PEO chain ends with 2‐bromoisobutyryl bromide to yield a macroinitiator for ATRP. The second block is added by polymerization of HMA, using the PEO macroinitiator in the presence of dibromobis(triphenylphosphine) nickel(II), NiBr2(PPh3)2, as the catalyst. Kinetics studies reveal absence of termination consistent with controlled polymerization of HMA. GPC data show low polydispersities of the corresponding diblock copolymers. The microdomain structure of selected PEO‐block‐PHMA block copolymers is investigated by small angle X‐ray scattering experiments, revealing behavior expected from known diblock copolymer phase diagrams.
SAXS diffractograms of PEO‐block‐PHMA diblock copolymers with 16, 44, 68 wt.‐% PEO showing spherical (A), cylindrical (B), and lamellae (C) morphologies, respectively. 相似文献
Summary: The influence of block‐selective solvent on the self‐assembly of polystyrene‐block‐poly[(acrylic acid)‐co‐(methyl acrylate)] was studied. The nature of the block‐selective solvent, which is a binary solvent mixture with different composition, exerts remarkable influence on the morphology of the resulting micelles. When the block‐selective solvent is a binary solvent mixture of acetone and water with acetone content ranging from 0 to 90 vol.‐%, the resulting aggregates are core‐shell spheres with diameter about 60 nm, porous aggregates with diameter of 100, 180 and 250 nm, and core‐shell cauliflower‐like aggregates with size about 200 nm, respectively. The reason that the morphology of resulting micelles changes with acetone content has been discussed. The structure of the resulting micelles is further characterized in detail by DLS and SLS. Morphological tuning is also achieved by using a binary solvent mixture of ethanol and water or a binary solvent mixture of DMF and water as block‐selective solvent. In these cases, core‐shell spheres, hollow aggregates, and incompact aggregates are formed with the ethanol or DMF concentration ranging from 10 to 80 vol.‐%.
Summary: Stable free‐radical copolymerizations (SFRP) of styrene with N‐acryloyl morpholine (AMo), 2‐ethoxyethyl acrylate (EOEA) and isobornyl acrylate (iBoA), respectively, were carried out under control of the stable nitroxide radical 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐N‐oxyl (OH‐TEMPO). The polymerizations were initiated by a polystyrene macroinitiator (PS‐MI). No accelerating agents were used. In contrast to the experiences made with methacrylates there was no decrease in the polymerization rates up to 50 mol‐% of AMo or EOEA in the monomer mixture. This behavior was ascribed to a compensation of the lack of thermal initiation by the high propagation rate constants of the acrylates. The produced AB diblock polymers were successfully employed in block extension reactions in styrene yielding ABA triblock polymers. Copolymerization reactivity ratios (r‐values) and glass transition temperatures have been estimated.
A well‐controlled two‐step process, the polymerisation of isoprene or isoprene/hex‐1‐ene copolymerisation followed by ε‐caprolactone polymerisation, affords trans‐polyisoprene or (trans‐polyisoprene/hex‐1‐ene copolymer)–poly(ε‐caprolactone) diblocks of various lengths. The single component initiator is an allylsamarocene compound. An atomic force microscopy study shows that these copolymers are efficient compatibilisers for poly(ε‐caprolactone) and polyisoprene blends.
Poly(ε‐caprolactone) chain growth from Sm–polyisoprene chain. 相似文献
