Human endothelial cell interaction with biomimetic surfactant polymers containing Peptide ligands from the heparin binding domain of fibronectin

Biomimetic materials that mimic the extracellular matrix (ECM) provide a means to control cellular functions such as adhesion and growth, which are vital to successful engineering of tissue-incorporated biomaterials. Novel "ECM-like" biomimetic surfactant polymers consisting of a poly(vinyl amine) backbone with pendant cell-adhesive peptides derived from one of the heparin-binding domains of fibronectin were developed to improve endothelial cell adhesion and growth on vascular biomaterials. Heparin-binding peptide (HBP) sequences, alone and in combination with RGD peptides, were examined for their ability to promote human pulmonary artery endothelial cell (HPAEC) adhesion and growth (HBP1, WQPPRARI; HBP2, SPPRRARVT; HBP1:RGD; and HBP2:RGD) and compared with cell adhesion and growth on fibronectin and on negative control polymer surfaces in which alanines were substituted for the positively charged arginine residues in the two peptides. The results showed that HPAECs adhered and spread equally well on all HBP-containing polymers and the positive fibronectin control, showing similar stress fiber and focal adhesion formation. However, the HBP alone was unable to support long-term HPAEC growth and survival, showing a loss of focal adhesions and cytoskeletal disorganization by 24 h after seeding. With the addition of RGD, the surfaces behaved similarly or better than fibronectin. The negative control polymers showed little to no initial cell attachment, and the addition of soluble heparin to the medium reduced initial cell adhesion on both the HBP2 and HBP2:RGD surfaces. These results indicate that the HBP surfaces promote initial HPAEC adhesion and spreading, but not long-term survival.     

Acrylic Acid-RGD as a Biomimetic Surface Modifier for Poly(ethylene terephthalate)

INTRODUCTION　Biomaterials play an importantrole in human disease- treatmentand healing〔1,2〕.Due to the good mechanical property,PET is used to the coating of artificial heartvalve,the film of mending hearts and artificial vessel etc〔3〕.But the imperfection isthe low capability of surface hydrophile leading to the high static and low water ad-sorption〔4〕.In the application,traditional artificial cardiovascular materials( e.g.PET) have blood coagulation,alexin- activation and other…     

The effect of adsorbed serum proteins, RGD and proteoglycan-binding peptides on the adhesion of mesenchymal stem cells to hydroxyapatite

Prior studies from our laboratory have shown that RGD peptides increase the attachment of mesenchymal stem cells (MSCs) to hydroxyapatite (HA), however, RGD does not induce cell spreading when coupled to this type of biomaterial. In an effort to improve MSC spreading, and possibly cell attachment, proteoglycan-binding peptides (KRSR or FHRRIKA) were combined with RGD in the current study. It was found that the peptide combinations did not enhance MSC attachment relative to RGD alone, although a slight amount of spreading was elicited by both KRSR and FHRRIKA. Similar results were obtained with proteoglycan-binding peptides modified with a heptaglutamate domain, a motif that improves peptide tethering to HA. To determine whether differentiation status affected cell responses, MSCs were in vitro differentiated into osteoblasts, and evaluated as before. These experiments revealed that, like MSCs, osteoblasts did not adhere in greater numbers to the peptide combinations. Finally, none of the peptides or peptide combinations were able to stimulate the robust amount of cell adhesion and spreading elicited by serum-coated HA surfaces (of note, five different species of serum were tested). Given the propensity of HA to adsorb proadhesive proteins from blood/serum, we question the utility of functionalizing HA with RGD and/or proteoglycan-binding peptides.     

RGD modified polymers: biomaterials for stimulated cell adhesion and beyond

Since RGD peptides (R: arginine; G: glycine; D: aspartic acid) have been found to promote cell adhesion in 1984 (Cell attachment activity of fibronectin can be duplicated by small synthetic fragments of the molecule, Nature 309 (1984) 30), numerous materials have been RGD functionalized for academic studies or medical applications. This review gives an overview of RGD modified polymers, that have been used for cell adhesion, and provides information about technical aspects of RGD immobilization on polymers. The impacts of RGD peptide surface density, spatial arrangement as well as integrin affinity and selectivity on cell responses like adhesion and migration are discussed.     

Identification and validation of a novel cell-recognition site (KNEED) on the 8th type III domain of fibronectin

Interactions between cell-surface integrins and extracellular matrix proteins underlie a versatile recognition system providing cells with anchorage, traction for migration or matrix remodeling, as well as signals for polarity, differentiation and growth. Short peptide sequences of fibronectin (FN), most notably RGD found on a loop in the 10th type III domain, are effective in promoting cell adhesion when immobilized to a biomaterial scaffold. Additional sequences (e.g. PHSRN) have been shown to act synergistically to enhance cell adhesion and other cellular processes. Using bioinformatics, we identified a candidate cell-binding peptide sequence, KNEED, located on the loop region of the 8th domain of FN that from in vitro studies appears to participate in cell attachment and spreading. Computational analysis revealed that KNEED exhibits both high solvent accessibility and sequence conservation values across FN sequences from seven species. We demonstrate the importance of the KNEED sequence using a solution-phase competitive inhibition assay utilizing soluble peptides. Results indicate that the presence of soluble KNEED peptides inhibits the attachment and spreading of 3T3 balb/c fibroblasts on FN-coated surfaces in a concentration-dependent manner. As more sequence and crystallographic data become available, computational approaches may aid in the identification of new targets for applications where biorecognition plays a key role.     

Mechanisms underlying the attachment and spreading of human osteoblasts: From transient interactions to focal adhesions on vitronectin-grafted bioactive surfaces

The features of implant devices and the reactions of bone-derived cells to foreign surfaces determine implant success during osseointegration. In an attempt to better understand the mechanisms underlying osteoblasts attachment and spreading, in this study adhesive peptides containing the fibronectin sequence motif for integrin binding (Arg-Gly-Asp, RGD) or mapping the human vitronectin protein (HVP) were grafted on glass and titanium surfaces with or without chemically induced controlled immobilization. As shown by total internal reflection fluorescence microscopy, human osteoblasts develop adhesion patches only on specifically immobilized peptides. Indeed, cells quickly develop focal adhesions on RGD-grafted surfaces, while HVP peptide promotes filopodia, structures involved in cellular spreading. As indicated by immunocytochemistry and quantitative polymerase chain reaction, focal adhesions kinase activation is delayed on HVP peptides with respect to RGD while an osteogenic phenotypic response appears within 24 h on osteoblasts cultured on both peptides. Cellular pathways underlying osteoblasts attachment are, however, different. As demonstrated by adhesion blocking assays, integrins are mainly involved in osteoblast adhesion to RGD peptide, while HVP selects osteoblasts for attachment through proteoglycan-mediated interactions. Thus an interfacial layer of an endosseous device grafted with specifically immobilized HVP peptide not only selects the attachment and supports differentiation of osteoblasts but also promotes cellular migration.     

Maleimide-thiol coupling of a bioactive peptide to an elastin-like protein polymer

Recombinant elastin-like protein (ELP) polymers display several favorable characteristics for tissue repair and replacement as well as drug delivery applications. However, these materials are derived from peptide sequences that do not lend themselves to cell adhesion, migration, or proliferation. This report describes the chemoselective ligation of peptide linkers bearing the bioactive RGD sequence to the surface of ELP hydrogels. Initially, cystamine is conjugated to ELP, followed by the temperature-driven formation of elastomeric ELP hydrogels. Cystamine reduction produces reactive thiols that are coupled to the RGD peptide linker via a terminal maleimide group. Investigations into the behavior of endothelial cells and mesenchymal stem cells on the RGD-modified ELP hydrogel surface reveal significantly enhanced attachment, spreading, migration and proliferation. Attached endothelial cells display a quiescent phenotype.     

The effect on osteoblast function of colocalized RGD and PHSRN epitopes on PEG surfaces

Poly(ethylene glycol) hydrogels were synthesized with pendant peptide functionalities to examine the influence of synergistic peptide sequences on osteoblast adhesion, spreading, and function. Specifically, acrylated monomers were prepared that contained the peptide sequence, Arg-Gly Asp (RGD), as well as monomers with RGD plus its synergy site, Pro-His-Ser-Arg-Asn (PHSRN), linked via a polyglycine sequence to recapitulate the native spacing of fibronectin. The colocalized RGD-PHSRN sequence improved osteoblast adhesion, spreading, and focal contact formation when compared to RGD alone. In addition, proliferation, metabolic activity, and levels of alkaline phosphatase production, a common marker for osteoblast function, were statistically higher for the colocalized peptide sequences at 1 day, 1 week, and 2 weeks, when compared to control surfaces. Interestingly, increases were not observed in all areas of cell function, as extracellular matrix (ECM) production was the lowest on gels functionalized with the colocalized peptide sequence. This result was attributed to strong receptor-ligand interactions initiating signal transduction cascades that down-regulate ECM production.     

Attachment and spreading of fibroblasts on an RGD peptide-modified injectable hyaluronan hydrogel

Hyaluronan (HA) hydrogels resist attachment and spreading of fibroblasts and most other mammalian cell types. A thiol-modified HA (3,3'-dithiobis(propanoic dihydrazide) [HA-DTPH]) was modified with peptides containing the Arg-Gly-Asp (RGD) sequence and then crosslinked with polyethylene glycol (PEG) diacrylate (PEGDA) to create a biomaterial that supported cell attachment, spreading, and proliferation. The hydrogels were evaluated in vitro and in vivo in three assay systems. First, the behavior of human and murine fibroblasts on the surface of the hydrogels was evaluated. The concentration and structure of the RGD peptides and the length of the PEG spacer influenced cell attachment and spreading. Second, murine fibroblasts were seeded into HA-DTPH solutions and encapsulated via in situ crosslinking with or without bound RGD peptides. Cells remained viable and proliferated within the hydrogel for 15 days in vitro. Although the RGD peptides significantly enhanced cell proliferation on the hydrogel surface, the cell proliferation inside the hydrogel in vitro was increased only modestly. Third, HA-DTPH/PEGDA/peptide hydrogels were evaluated as injectable tissue engineering materials in vivo. A suspension of murine fibroblasts in HA-DTPH was crosslinked using PEGDA plus PEGDA peptide, and the viscous, gelling mixture was injected subcutaneously into the flanks of nude mice; gels formed in vivo following injection. After 4 weeks, growth of new fibrous tissue had been accelerated by the sense RGD peptides. Thus, attachment, spreading, and proliferation of cells is dramatically enhanced on RGD-modified surfaces but only modestly accelerated in vivo tissue formation.     

The selective modulation of endothelial cell mobility on RGD peptide containing surfaces by YIGSR peptides

The ability of the biomimetic peptides YIGSR, PHSRN and RGD to selectively affect adhesion and migration of human microvascular endothelial cells (MVEC) and vascular smooth muscle cells (HVSMC) was evaluated. Cell mobility was quantified by time-lapse video microscopy of single cells migrating on peptide modified surfaces. Polyethylene glycol (PEG) hydrogels modified with YIGSR or PHSRN allowed only limited adhesion and no spreading of MVEC and HVSMC. However, when these peptides were individually combined with the strong cell binding peptide RGD in PEG hydrogels, the YIGSR peptide was found to selectively enhance the migration of MVEC by 25% over that of MVEC on RGD alone (p<0.05). No corresponding effect was observed for HVSMC. This suggests that the desired response of specific cell types to tissue engineering scaffolds could be optimized through a combinatory approach to the use of biomimetic peptides.     

NCO-sP(EO-stat-PO) surface coatings preserve biochemical properties of RGD peptides

We have previously reported that star shaped poly(ethylene oxide-stat-propylene oxide) macromers with 80% EO content and isocyanate functional groups at the distal ends [NCO-sP(EO-stat-PO)] can be used to generate coatings that are non-adhesive but easily functionalized for specific cell adhesion. In the present study, we investigated whether the NCO-sP(EO-stat-PO) surfaces maintain peptide configuration-specific cell-surface interactions or if differences between dissimilar binding molecules are concealed by the coating. To this end, we have covalently immobilized both linear-RGD peptides (gRGDsc) and cyclic-RGD (RGDfK) peptides in such coatings. Subsequently, SaOS-2 or human multipotent mesenchymal stromal cells (MSC) were seeded on these substrates. Cell adhesion, spreading and survival was observed for up to 30 days. The time span for cell adherence was not different on linear and cyclic RGD peptides, but was shorter in comparison to the unmodified glass surface. MSC proliferation on cyclic RGDfK modified coatings was 4 times higher than on films functionalized by linear gRGDsc sequences, underlining that the NCO-sP(EO-stat-PO) film preserves the configuration-specific biochemical peptide properties. Under basal conditions, MSC expressed osteogenic marker genes after 14 days on cyclic RGD peptides, but not on linear RGD peptides or the unmodified glass surfaces. Our results indicate specific effects of these adhesion peptides on MSC biology and show that this coating system is useful for selective testing of cellular interactions with adhesive ligands.     

Photoencapsulation of osteoblasts in injectable RGD-modified PEG hydrogels for bone tissue engineering

Poly(ethylene glycol) (PEG) hydrogels were investigated as encapsulation matrices for osteoblasts to assess their applicability in promoting bone tissue engineering. Non-adhesive hydrogels were modified with adhesive Arg-Gly-Asp (RGD) peptide sequences to facilitate the adhesion, spreading, and, consequently, cytoskeletal organization of rat calvarial osteoblasts. When attached to hydrogel surfaces, the density and area of osteoblasts attached were dramatically different between modified and unmodified hydrogels. A concentration dependence of RGD groups was observed, with increased osteoblast attachment and spreading with higher RGD concentrations, and cytoskeleton organization was seen with only the highest peptide density. A majority of the osteoblasts survived the photoencapsulation process when gels were formed with 10% macromer, but a decrease in osteoblast viability of approximately 25% and 38% was seen after 1 day of in vitro culture when the macromer concentration was increased to 20 and 30wt%, respectively. There was no statistical difference in cell viability when peptides were added to the network. Finally, mineral deposits were seen in all hydrogels after 4 weeks of in vitro culture, but a significant increase in mineralization was observed upon introduction of adhesive peptides throughout the network.     

Comparison of Bone Marrow Stromal Cell Behaviors on Poly(caprolactone) with or without Surface Modification: Studies on Cell Adhesion,Survival and Proliferation

Poly(caprolactone) (PCL) is a promising biodegradable polymer for tissue engineering. However, intrinsically poor cell-adhesive properties of PCL may limit its application. In this study, the PCL film surface was modified with RGDC peptide by a chemical immobilization procedure. Furthermore, bone marrow stromal cell (BMSC) behaviors including attachment, spreading, focal adhesion formation, focal adhesion kinase (FAK) activation, apoptosis and proliferation when cultured on the modified PCL films were investigated. Our results demonstrated that PCL with RGD modification promoted initial BMSC attachment, spreading and focal adhesion formation. At a later time point (12 h), BMSC attachment on both RGD peptide-modified PCL and PCL-NH₂ films significantly increased compared to untreated PCL films. Importantly, FAK phosphorylation was significantly increased only on the films with RGD-modified films, not on the PCL-NH₂ films, demonstrating that PCL with RGD modification had an advantage in initiating the specific integrin-mediated signal transduction and might play an important role in the subsequent retardation in cell death and enhancement in cell proliferation. The present results provide more evidence that functionalizing PCL with RGD peptides may be a feasible way to improve the interaction between BMSC and PCL substrate, which is important in tissue engineering.     

Conception, élaboration et caractérisation de matériaux bioactifs

One promising strategy to control the interactions between biomaterial surfaces and attaching cells involves grafting of adhesion peptides as RGD peptides (R: arginine; G: glycine; D: aspartic acid) to materials on which protein adsorption, which mediates unspecific cell adhesion, is essentially suppressed. This review gives an overview of RGD modified materials, that have been used for cell adhesion, and provides information about technical aspects of RGD immobilization on materials. The impacts of RGD peptide surface density, spatial arrangement as well as integrin affinity and selectivity on cell responses like adhesion and migration are discussed. We have tried to relate one of numerous scientifics adventures initiated by Charles Baquey within our laboratory. This review is dedicated to him for his enthusiasm in the development of project and for his wish of always leading of a professional blooming of his students.     

The microenvironment of immobilized Arg-Gly-Asp peptides is an important determinant of cell adhesion

This paper uses self-assembled monolayers on gold as a model system to demonstrate that the attachment and spreading of Swiss 3T3 fibroblasts depends strongly on the microenvironment of immobilized RGD peptides. This work utilized monolayers that present mixtures of Arg-Gly-Asp peptides, which are ligands for cellular integrin receptors, and oligo(ethylene glycol) groups, which resist the nonspecific adsorption of protein. The microenvironment of the peptide ligands was controlled by altering the length of the surrounding oligo(ethylene glycol) groups on the monolayer. By using thiols that present either tri-, tetra-, penta-, or hexa(ethylene glycol) units, the average distance separating the glycol groups and the peptide ligand is altered while the structure and properties of the background remain unchanged. Cell attachment to monolayers presenting a fixed density of peptide decreased as the length of the oligo(ethylene glycol) group increased. The average projected area of attached cells showed a similar trend. At lower densities of immobilized peptide, decreases in both cell attachment and projected cell area were more pronounced. Attachment and spreading did not depend on density of peptide on monolayers presenting tri(ethylene glycol) groups, but showed a high sensitivity to density of ligand on monolayers presenting longer glycol oligomers. Experiments that used a soluble peptide to inhibit the attachment of cells to monolayers demonstrated that the strength of the cell-substrate interaction decreased on monolayers presenting longer glycol groups. Together, these results suggest that the microenvironment of the peptide ligand influences the affinity of the integrin-peptide interaction and that weaker interactions display a density-dependent enhancement of binding during cell attachment and spreading. This finding is an important consideration in studies that correlate biological function with the composition of ligands on a substrate. This finding also represents an important principle for the design of biologically active materials because it illustrates the degree to which the presentation of adhesion motifs can modify the response of mammalian cells.     

Human endothelial cell interactions with surface-coupled adhesion peptides on a nonadhesive glass substrate and two polymeric biomaterials.

The attachment, spreading, spreading rate, focal contact formation, and cytoskeletal organization of human umbilical vein endothelial cells (HUVECs) were investigated on substrates that had been covalently grafted with the cell adhesion peptides Arg-Gly-Asp (RGD) and Tyr-Ile-Gly-Ser-Arg (YIGSR). This approach was used to provide substrates that were adhesive to cells even in the absence of serum proteins and with no prior pretreatment of the surface with proteins of the cell adhesion molecule (CAM) family. This approach was used to dramatically enhance the cell-adhesiveness of substrates that were otherwise cell-nonadhesive and to improve control of cellular interactions with cell-adhesive materials by providing stably bound adhesion ligands. Glycophase glass was examined as a model cell-nonadhesive substrate prior to modification, and polyethylene terephthalate (PET) and polytetrafluoroethylene (PTFE) were examined as representative materials for biomedical applications. The peptides were surface-coupled by their N-terminal amine to surface hydroxyl moieties using tresyl chloride chemistry. Prior to peptide grafting, the PET and PTFE were surface hydroxylated to yield PET-OH and PTFE-OH. The PET-OH was less cell-adhesive and the PTFE-OH was much more cell-adhesive than the native polymers. Radioiodination of a C-terminal tyrosine residue was used to quantify the amount of peptide coupled to the surface, and these amounts were 12.1 pmol/cm2 on glycophase glass, 139 fmol/cm2 on PET-OH, and 31 fmol/cm2 on PTFE-OH. Although the glycophase glass did not support adhesion or spreading even in the presence of serum, the RGD- and YIGSR-grafted glycophase glass did support adhesion and spreading, even when the only serum protein that was included was albumin. Although PET and PTFE-OH supported adhesion when incubated in serum-supplemented medium, neither of these materials supported adhesion with only albumin present, indicating that cell adhesion is mediated by adsorbed CAM proteins. When these materials were peptide-grafted, however, extensive adhesion and spreading did occur even when only albumin was present. Since the peptide grafting is quite easily controlled and is temporally stable, while protein adsorption is quite difficult to precisely control and is temporally dynamic, peptide grafting may be advantageous over other approaches employed to improve long-term cell adhesion to biomaterials.     

Immobilized RGD peptides on surface-grafted dextran promote biospecific cell attachment

Dextran has recently been investigated as an alternative to poly(ethylene glycol) (PEG) for low protein-binding, cell-resistant coatings on biomaterial surfaces. Although antifouling properties of surface-grafted dextran and PEG are quite similar, surface-bound dextran has multiple reactive sites for high-density surface immobilization of biologically active molecules. We recently reported nontoxic aqueous methods to covalently immobilize dextran on material surfaces. These dextran coatings effectively limited cell adhesion and spreading in the presence of serum-borne cell adhesion proteins. In this study we utilized the same nontoxic aqueous methods to graft cell adhesion peptides on low protein-binding dextran monolayer surfaces. Chemical composition of all modified surfaces was verified by X-ray photoelectron spectroscopy (XPS). Surface-grafted cell adhesion peptides stimulated endothelial cell, fibroblast, and smooth muscle cell attachment and spreading in vitro. In contrast, surface-grafted inactive peptide sequences did not promote high levels of cell interaction. Surface-grafted high affinity cyclic RGD peptides promoted cell type-dependent interactions. With dextran-based surface coatings, it will be possible to develop well-defined surface modifications that promote specific cell interactions and perhaps better performance in long-term biomaterial implants.     

Development of a YIGSR-peptide-modified polyurethaneurea to enhance endothelialization

Polyurethanes have been investigated for use as vascular grafts due to their excellent mechanical properties and relatively good biocompatibility. However, poor retention of endothelial cells and thrombogenicity in vivo remain problematic for vascular graft applications. The peptide YIGSR has been shown to increase endothelial cell adhesion but not attachment of platelets, suggesting its possible utility for vascular graft applications. In this study, a bioactive polyurethaneurea has been synthesized by incorporating GGGYIGSRGGGK peptide sequences into the polymer backbone. Successful incorporation of the peptides was confirmed by NMR, contact angle measurement and ESCA. Uniform distribution of peptides on the surface was observed using a fluorescent probe capable of reacting with tyrosine residues on the peptides. Hard segment domains were visualized using tapping mode AFM. Endothelial cell adhesion, spreading, proliferation, migration and extra-cellular matrix production were improved on bioactive polyurethaneurea compared to control polyurethaneurea. Competitive inhibition of endothelial cell attachment and spreading by soluble YIGSR peptides indicated that cell adhesion and spreading were specifically mediated by YIGSR-sensitive cell adhesion receptor, not just by changed surface properties. There was no significant difference in the number of adherent platelets. Therefore, this bioactive polyurethanurea may improve vascular graft endothelialization without increasing thrombogenicity.     

Development of a YIGSR-peptide-modified polyurethaneurea to enhance endothelialization

Polyurethanes have been investigated for use as vascular grafts due to their excellent mechanical properties and relatively good biocompatibility. However, poor retention of endothelial cells and thrombogenicity in vivo remain problematic for vascular graft applications. The peptide YIGSR has been shown to increase endothelial cell adhesion but not attachment of platelets, suggesting its possible utility for vascular graft applications. In this study, a bioactive polyurethaneurea has been synthesized by incorporating GGGYIGSRGGGK peptide sequences into the polymer backbone. Successful incorporation of the peptides was confirmed by NMR, contact angle measurement and ESCA. Uniform distribution of peptides on the surface was observed using a fluorescent probe capable of reacting with tyrosine residues on the peptides. Hard segment domains were visualized using tapping mode AFM. Endothelial cell adhesion, spreading, proliferation, migration and extra-cellular matrix production were improved on bioactive polyurethaneurea compared to control polyurethaneurea. Competitive inhibition of endothelial cell attachment and spreading by soluble YIGSR peptides indicated that cell adhesion and spreading were specifically mediated by YIGSR-sensitive cell adhesion receptor, not just by changed surface properties. There was no significant difference in the number of adherent platelets. Therefore, this bioactive polyurethanurea may improve vascular graft endothelialization without increasing thrombogenicity.     

RGD肽对内皮细胞在聚酯材料表面粘附、增殖的影响

RGD是许多粘附蛋白结构中的高度保守序列，与细胞在生物材料表面的粘附、增殖密切相关。本研究在聚酯薄膜表面分别预衬纤维粘连蛋白和共价接枝RGD三肽，然后在不同聚酯材料上种植体外培养的人脐静脉内皮细胞，结果显示RGD可明显促进细胞在材料表面的粘附和增殖，与纤维粘连蛋白相比，RGD促进细胞粘附的作用更为明显，而在细胞增殖方面，二者的作用无显著性差异。本研究为改进生物材料的表面设计，促进心血管移植物的内皮化提供了一个切实可行的思路。