Analisi della morfologia radicolare e canalare di molari superiori ed inferiori in una popolazione Caucasica: studio in vivo alla CBCT

AimTo investigate the root and canal morphology of maxillary and mandibular permanent molar teeth in a Caucasian population by using Cone Beam Computed Tomography (CBCT).MethodsA total of 596 permanent molars were included. The number of roots, the number of canals per root and the root canal configurations according to the method of Vertucci were recorded.ResultsAlmost all of maxillary first molars (95.7%) had three separate roots; however, 40.3% of mesiobuccal roots had two canals (MB2). Of 157 maxillary second molars, 88.5% had three roots. Among the mesiobuccal roots, 15.1% had two canals. The majority of mandibular molars (100% of first molars, 89.4% of second molars) had two separate roots. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal.ConclusionsCBCT is an efficient method of studying root canal systems.     

A preliminary in vitro study of the incidence and position of the root canal isthmus in maxillary and mandibular first molars

AIM: To investigate in vitro the incidence and position of the root canal isthmus in extracted mesiobuccal roots of maxillary and mesial roots of mandibular first molars. METHODOLOGY: Fifty maxillary and 50 mandibular molars were included in the study. The mesiobuccal roots of maxillary molars and the mesial roots of mandibular molars were sectioned from their crowns in the furcation region and embedded in clear resin. Transverse serial 1-mm-thick sections from the apical 6 mm were prepared. The apical side of each section was stained with India ink and observed through a light microscope. The sample images were saved to disk using a digital camera and the root canals in terms of the number present and the incidence and classification of isthmuses. RESULTS: In the mesiobuccal root of the maxillary first molars, 70% had one canal, whereas 29.5% had two canals. In the mesial root of mandibular molars, 41% had one canal, whereas 59% had two canals. In some sections, more than two canals were found close to the apical foramen. The isthmus incidence was greatest 3-5 mm from the apex. In teeth having two canals, a complete or partial isthmus was frequently observed in the sections between 3 and 4 mm from the apex. Of the isthmuses present, 22% were complete and 37% partial in mandibular molars and 17.3% were complete and 11.7% partial in maxillary molars. CONCLUSIONS: The incidence of isthmus in the mesiobuccal root of the maxillary first molars and in the mesial root of the mandibular first molars was high, particularly in sections 3-5 mm from the apex. Cleaning the isthmus is a major challenge during root canal treatment.     

上颌第二乳磨牙根管数目的临床研究

目的 观察临床治疗中上颌第二乳磨牙根管数目.方法 选取需行上颌第二乳磨牙根管治疗的3~8岁患儿204例,共216颗患牙.常规方法开髓、制备开髓洞型,使髓室底完全暴露,用小号锉结合17%乙二胺四乙酸(ethylene diamine tetraacetic acid,EDTA)溶液探查各根管口的位置,确定并记录根管数目,根管预备完成后采用碘仿氧化锌糊剂进行根管充填.结果 216颗上颌第二乳磨牙中,122颗为3根管(占56.5%);94颗为4根管(占43.5%),根管数目变异以近中颊根第二根管(second mesiobuccal canal,MB2)出现频率较高,占比41.2%.上颌第二乳磨牙MB2的发现率在性别(X2=1.004,P=0.316)及牙位方面的差异(X2=0.072,P=0.788)没有统计学意义.结论 上颌第二乳磨牙根管数目存在较多变异,MB2发现率较高.     

The MB3 canal in maxillary molars: a micro-CT study

Objectives

To assess the internal and external morphologies of the mesiobuccal (MB) root of maxillary molars presenting a third root canal (MB3), using micro-computed tomography (micro-CT).

Material and methods

Two-hundred and sixty-five extracted maxillary first and second molars with different root configurations were imaged in a micro-CT scanner at 19.6-μm pixel size. Sixteen teeth presenting MB3 canal were selected and evaluated regarding root configuration, minimal dentine thickness 2 mm under the furcation area, canal configuration of the MB root, MB3 canal morphology (location, independent or confluent orifice, and anatomy types), and the apical anatomy (aspect ratio, number of accessory canals and foramina, presence of isthmus, and independent MB3 foramen).

Results

Overall, a high variability in canal configuration was detected in the MB root. MB3 canal was observed in 10 maxillary first molars and 6 maxillary second molars (n = 16). Minimal dentine thickness related to the MB3 canal at the coronal third was smaller than that of the MB1 canal. A complex internal anatomy comprising 13 different root canal configurations was observed. A high number of independent MB3 orifices at the pulp chamber floor was observed in the first molars (7 out of 10 teeth), while most of the specimens (n = 14) showed a confluent anatomy of the MB3 canal. A varied number of accessory canals and foramina were observed. At the apical third, isthmus could be observed in 6 specimens, while an independent MB3 foramen was present in 37.5% of the MB roots.

Conclusions

MB3 canal is a rare anatomical variation present in maxillary first and second molars. Its presence can be associated to a complex internal anatomy of the MB root which includes the presence of isthmuses and multiple accessory canals and foramina at the apical third, but also a thin dentine thickness at the coronal third and a confluent anatomy of the MB3 with the other main canals.

     

Anatomic determination of the mesiobuccal root resection level in maxillary molars

Surgical endodontics involving root resection/apical fill are often performed when retreatment by orthograde endodontic procedures are not possible. Because of the potential presence of accessory canals within the root, a preferred minimal root resection level should be investigated for the removal of the majority of these canals. One hundred fifty-three extracted, uninstrumented, mesiobuccal roots from first and second maxillary molars were examined for the presence of accessory canals, canal isthmus, and canal wall thickness. Three hundred ninety accessory canals were identified, with 80% of these canals located within 3.64 mm of the apex of the tooth. Canal isthmus was often not evident until 3.12 mm of the root was resected, with canal wall thickness only approximating 1 mm thick. The observations here suggest a minimal resection level to 3.6 mm for accessory canal incidence, canal isthmus detection, and canal wall thickness and provide a better understanding of maxillary mesiobuccal (MB) root anatomy for retrograde root resection/apical filling.     

上颌第二磨牙根管数目的临床研究

目的观察临床治疗中上颌第二磨牙根管数目。方法临床需要根管治疗的上颌第二磨牙166颗,拍X线片,术中配合使用根管显微镜、超声根管锉、小号K锉及17％EDTA溶液,探查并扩通根管,确定根管数目。用镍钛锉进行根管预备,侧方加压技术充填根管。结果166颗上颌第二磨牙中：单根管牙为2颗（1．2％）;双根管牙（颊根根管、腭根根管）5颗（3．0％）;3根管牙（近中颊根根管、远中颊根根管、腭根根管）为117颗（70．5％）;四根管牙为42颗（25．3％）,其中近中颊根第2根管（MB2）发生率23．5％。结论上颌第二磨牙根管变异较大,临床治疗中应多加注意。     

Root canal morphology of the mesiobuccal root in maxillary first molars of a Jordanian population

This in vitro study investigated the presence of second (MB2) root canals and the number of apical foramina found in mesiobuccal roots of the permanent maxillary first molars; in addition, the study evaluated the effectiveness of magnification to detect MB2 canals. One hundred extracted maxillary first molars were collected from Jordanian patients. The number of roots (as well as their morphology) was investigated. The number of canal orifices in mesiobuccal root was assessed, with and without magnification, and findings were compared. The number of apical foramina and the distance between mesiobuccal and second canal orifices were investigated under magnification. Of the 97 specimens that were subject to additional investigation, all teeth had three separated roots, except for three specimens that had either mesiobuccal or distobuccal roots fused with the palatal root. The number of MB2 canals that were detected increased from 55 (56.7%) to 61 (62.9%) teeth when magnification was used. Within the limits of this in vitro study, it was concluded that the Jordanian population had a high percentage of MB2 canals in the mesial buccal roots. Moreover, the use of clinically used magnifying devices increased the number of MB2 canals detected.     

Incidence and configuration of canal systems in the mesiobuccal root of maxillary first and second molars

The anatomy of the mesiobuccal (MB) root of 51 maxillary first and 32 maxillary second molars was studied. Initially, an attempt was made to locate all canals using a standard access and hand instruments. A bur was next used carefully to locate any additional second mesiobuccal (mesiolingual (ML)) canals. Finally, after crown removal, the teeth were reduced horizontally in 1-mm increments and examined by microscope. A second ML canal was located in the coronal half of 95.2% of the roots: by hand instruments in 54.2%; bur in 31.3%; and microscope in 9.6%. There were no root perforations when the bur was used as described. The ML canal orifice averaged 1.82 mm lingual to the MB canal orifice. The difference in incidence of ML canals between the first and second molars was not statistically significant. The canal systems were type 1, 4.8%; type 2, 49.4%, and type 3, 45.8%.     

Identification of second canals in the mesiobuccal root of maxillary first and second molars using magnifying loupes or an operating microscope

Various authors have investigated the frequency of second canals (MB2) in the mesiobuccal roots of maxillary molars, predominantly first molars. Further, it has been reported that the percentage of MB2 canals that are treated during routine endodontic therapy is much lower than the number of second canals identified in vitro. It was the purpose of this study to investigate whether the use of an operating microscope may improve the diagnosis of MB2 canals in mesiobuccal roots of maxillary molars. The canal orifices of 100 maxillary first and second molars (50 of each) were initially inspected by Examiner 1 using individually-adapted x2 magnifying loupes. Subsequently, all teeth were examined by a second investigator using an operating microscope (OPM) with x8 magnification. Finally, the mesiobuccal roots of all teeth were separated. Then, the sections were analysed histologically and by SEM. The histological investigation revealed a total number of 63 MB2 canals, 39 in first, and 24 in second molars. Only 26 (41.3%) of those canals were identified using magnifying loupes, whereas 59 (93.7%) were found by means of an operating microscope.     

A study of the distobuccal root canal orifice of the maxillary second molars in Chinese individuals evaluated by cone-beam computed tomography

As is commonly understood, the root canal morphology of the maxillary molars is usually complex and variable. It is sometimes difficult to detect the distobuccal root canal orifice of a maxillary second molar with root canal treatment. No literature related to the distobuccal root canals of the maxillary second molars has been published.

Objective

To investigate the position of the distobuccal root canal orifice of the maxillary second molars in a Chinese population using cone-beam computed tomography (CBCT).

Material and methods

In total, 816 maxillary second molars from 408 patients were selected from a Chinese population and scanned using CBCT. The following information was recorded: (1) the number of root canals per tooth, (2) the distance between the mesiobuccal and distobuccal root canal orifice (DM), (3) the distance between the palatal and distobuccal root canal orifice (DP), (4) the angle formed by the mesiobuccal, distobuccal and palatal root canal orifices (∠ PDM). DM, DP and ∠ PDM of the teeth with three or four root canals were analyzed and evaluated.

Results

In total, 763 (93.51%) of 816 maxillary second molars had three or four root canals. The distance between the mesiobuccal and distobuccal orifice was 0.7 to 4.8 mm. 621 (81.39%) of 763 teeth were distributed within 1.5-3.0 mm. The distance between the palatal and distobuccal orifice ranged from 0.8 mm to 6.7 mm; 585 (76.67%) and were distributed within 3.0-5.0 mm. The angle (∠ PDM) ranged from 69. 4º to 174.7º in 708 samples (92.80%), the angle ranged from 90º to 140º.

Conclusions

The position of the distobuccal root canal orifice of the maxillary second molars with 3 or 4 root canals in a Chinese population was complex and variable. Clinicians should have a thorough knowledge of the anatomy of the maxillary second molars.     

显微CT法研究上颌第一磨牙根管系统解剖形态

目的 使用显微CT研究上颌第一磨牙根管系统解剖形态.方法 随机收集33颗上颌第一磨牙,使用显微CT扫描后重建根管系统.观察并记录各牙根根管形态和分支根管的发生数目、位置.记录各根管口位置并测量根管口间的距离和所成角度.在距离根尖1、2和3mm处进行虚拟切割,记录断面上分支根管暴露情况.结果 上颌第一磨牙近颊根第二根管发生率为75.76%.近颊根发生分支根管为71.64%;近颊根分支根管发生率为72.73%.91.04%的分支根管发生于根尖1/3段,近颊根距根尖3mm处截面分支根管暴露率为12.12%.近颊根第一、第二根管口间的距离为(1.60±0.41)mm.结论 上颌第一磨牙根管系统解剖形态复杂,近颊根根管形态存在较大解剖变异.     

Prevalence of a second canal in the mesiobuccal root of permanent maxillary first molars from an Indonesian population

A sample of 308 extracted human permanent maxillary first molars from an Indonesian population was randomly selected. A rhomboid access cavity was made in all teeth in anticipation of identifying a second mesiobuccal canal (MB2). Ultrasonic tips were used to open the subpulpal groove to locate the second canal in the mesiobuccal root. Dentin was carefully removed from the trifurcation area at the expense of the mesial wall. If a second canal was located, a 0.8 C+ file was inserted into it until the file reached the apex. The prevalence of a second canal in the mesiobuccal root of the permanent maxillary first molar was 68.5% (95% CI: 63.1%-73.4%) in this population. Sections of the mesial root showed that the MB2 was a separate canal in 52.6% of the sample and a joined canal in 47.4%. The mean (SD) distance between MB1 and MB2 was 1.55 (0.66) mm. The data obtained from this study provide theoretical and experimental evidence to aid in the clinical management of the MB2 canal and may increase the success rate for root canal treatment of the maxillary first molar.     

Root and canal morphology of the mesiobuccal and distal roots of permanent first molars in a Kuwait population--a clinical study

Aim To identify the number of roots and canal configurations in permanent first molars of the indigenous Kuwaiti sub‐population and compare them against a similar group of non‐Kuwaiti population in different age groups and gender, and to determine the frequency of a second canal in the mesiobuccal root of maxillary first molars and distal root of mandibular first molars that could be located and treated in routine practice without using magnification or special lighting conditions. Methodology A total of 220 permanent first molar teeth of patients scheduled for root canal treatment over a period of 1 year were included. Patients were identified and grouped according to their nationality as Kuwaiti and non‐Kuwaiti (which included Filipinos, Indonesian Indians, Srilankans, Egyptians, Saudi Arabians and Syrians). In both nationality groups, patients were successively distributed into four groups based on their age. The first age group included patients below 20 years, the second 21–30 years, the third 31–40 years and the fourth were over 40 years. The first three groups comprised of 15 male and 15 female patients whilst the fourth group had 10 patients of each gender. Teeth with open apices, resorptions and calcification were excluded from the study. The teeth included were both clinically and radiographically examined for number of roots, the canal configuration and the presence of the additional mesiobuccal and distal canals and recorded. The simplified classification of canal configurations proposed by Weine was utilized. Results The incidence of a second canal in the mesiobuccal (MB) root of maxillary first molars and the distal root of mandibular first molars was not influenced significantly by nationality and gender. All the 110 maxillary first molars treated had three roots; 58% of MB root had one canal and 42% had two canals. The majority of the mesial roots had Weine type II canal configuration when the second mesiobuccal canal was present. All distobuccal and palatal roots had a single or type I canal configuration. Of the 110 mandibular first molars that were treated, 96% had two roots and 4% had three roots. When present, the third root was located either buccal or lingual to the main distal root. Overall 51% of the single distal roots had one canal whilst 49% had two canals. The mesial root frequently had a Weine type II canal configuration as did the distal root when a second canal was present. Pearson’s correlation analysis of both molars revealed a significant (P < 0.05) negative correlation (r = ?0.274, r = ?0.144) between age and number of canals as well as the type of canal. Conclusions The incidence of a second canal in distal roots of permanent mandibular first molars was 49% in the Kuwaiti population and this was similar to other Asian ethnic populations. Adopting modified access and troughing procedures revealed a 42% frequency of MB2 canals in maxillary first molars. The incidence of a second canal in both mesiobuccal roots of maxillary molars and distal roots of mandibular molars decreased significantly with age; no differences were noticed amongst the nationalities and gender studied. The possibility of extra roots should be anticipated in mandibular molars.     

Root and root canal variations of the human maxillary and mandibular third molars in a Chinese population: A micro–computed tomographic study

ObjectivesTo investigate the anatomical variations of the root and root canal configuration of the human third molars.DesignsA total of 130 maxillary and 130 mandibular third molars were collected from a native Chinese population. All teeth were scanned by micro–computed tomography. After 3D reconstruction, the root and canal morphology of each tooth was examined both qualitatively and quantitatively.ResultsFor maxillary molars, a single fused root (67 cases, 51.5%) and a single root canal system (64 cases, 49.2%) was most common root/canal form; the typical three-rooted molars were detected only in 33 cases (25.4%), and the secondary MB canals were detected only in 9 molars (6.9%). For mandibular molars, 62 teeth were single-rooted (47.7%) and 42 had a single root canal system (32.3%); 20 singled-rooted and 60 double-rooted molars exhibited independent mesial and distal root canal systems (61.5%), and the type 1-1 canal was the most common configuration for mesial (57 cases) and distal (81 cases) root canal systems. C-shaped canals were detected in 11 maxillary and 36 mandibular single-rooted molars. The mean root surface area, root and crown volume of mandibular third molars were significantly higher than the maxillary third molars (P < 0.01).ConclusionThe root canal system of the third molars may exhibit several anatomic variations. Whereas in most of cases, the degree of the canal differentiation was at a low level, and the canal form was not complicate.     

上颌磨牙近中颊根第二根管口的解剖定位

目的　寻找上颌磨牙近中颊根第二根管 (MB2 )根管口的定位规律。方法　收集离体上颌第一、二磨牙共 5 5 0颗。根管显微镜 (DOM)下探查根管口 ,拍摄髓底图片 ,测量髓底一系列参数 ,分析MB2根管口定位规律。结果　DOM下MB2发现率在上颌第一磨牙和第二磨牙分别为 78.2 4 %和 4 1.32 %。MB2根管口位于MB P根管口连线的近中 ,与该连线的垂直距离在上颌第一磨牙和第二磨牙分别为 0 .6 6mm和 0 .6 3mm ;距近颊根主根管 (MB)根管口距离分别为 1.32mm和 1.2 1mm。结论　建议临床医生在探查上颌磨牙髓底时 ,可在MB P根管口假想连线的近中、距其 0 .5～ 1.0mm ,距MB根管口 1.0～ 2 .0mm ,使MB MB2根管口间假想的、微凸向近中的弧形连线与近中边缘嵴平行处寻找MB2根管口。     

上颌第一恒磨牙根管弯曲度初探

目的:分析上颌第一恒磨牙根管弯曲发生情况、弯曲位置、弯曲方向及弯曲程度。方法:收集南京地区80例上颌第一恒磨牙,在根管中分别插入15#~20#扩大针,拍摄近远中向和颊舌向X线片,用Photoshop6.0软件测量分析根管弯曲位置、弯曲方向和弯曲角度。结果:1)上颌第一磨牙腭侧根管通畅、较直。2)远中颊侧根管在近远中方向有80%,颊舌方向有45%出现大于5°的明显弯曲,弯曲位置多位于根中1/3,且近远中向的弯曲明显大于颊舌向(P<0.05)。3)上颌第一恒磨牙近中颊根颊侧根管在近远中方向、颊舌方向分别有82.5%、77.5%出现大于5°的明显弯曲。两个方向上的弯曲程度无明显差异(P>0.05)。4)本研究中有35%的标本探通了近颊根舌侧根管,其在近远中向、颊舌向出现明显弯曲的比例达91%、83%。结论:上颌第一恒磨牙四个根管在近远中方向、颊舌方向均有不同程度的弯曲,其第二弯曲出现的情况也各不相同。     

Incidence of Middle Mesial Canals Based on Distance between Mesial Canal Orifices in Mandibular Molars: A Clinical and Cone-beam Computed Tomographic Analysis

IntroductionThis study evaluated the presence of midmesial canals (MMCs) in a random sample of mandibular molars and the relationship of the intracanal distance between mesiobuccal (MB) and mesiolingual (ML) canal orifices.MethodsFifty-one extracted mandibular molars were divided into samples of 3 to 4 teeth, mounted in plaster and boxing wax, and immersed in water before cone-beam computed tomographic (CBCT) imaging. Two endodontic residents completed the access openings. The teeth and the CBCT images were interpreted for the presence of MMCs and the mesial intracanal distance. CBCT software measured the distance between the buccal of the MB canal to the lingual of the ML canal at the pulpal floor to determine the average length between the canals.ResultsSeven distinct MMCs were seen both clinically (incidence of 13.725%) and on the CBCT images. Twenty-seven teeth (52.94%) had ambiguous broad isthmi between the MB and the ML orifices. MMCs were present at the furcation level but merged with the MB or ML canal toward the apex in 6 of 7 teeth (85.71%). The mean distance between the mesial canals in teeth with MMCs was 3.643 mm, and it was 3.818 mm for teeth without MMCs. According to independent sample t testing, the P value was >.05.ConclusionsThe incidence of MMCs in mandibular molars appears consistent with the literature. However, there does not appear to be a statistically significant difference in the mesial intracanal distance in teeth with and without MMCs. Visualization of MMCs on CBCTs may be subjective. There does not appear to be a correlation between the presence of MMCs and an increased or decreased mesial intracanal distance.     

Detection of the second mesiobuccal canal in mesiobuccal roots of maxillary molar teeth ex vivo

AIM: To assess the effectiveness of magnification and dentine removal (troughing) when locating the second mesiobuccal canal in mesiobuccal roots of maxillary molars. METHODOLOGY: A total of 208 extracted human maxillary molars were examined. After crown and pulp removal, the MB1 and 2 canals in the mesiobuccal root were located in three stages that were performed by two undergraduate dental students. Stage 1: canals were located with an endodontic explorer; stage 2: additional canals in the same teeth were located under magnification with a digital microscope (VH-8000, Keyence, Japan); stage 3: additional canals in the same teeth were located by removing dentine (troughing) from the pulp chamber floor within 3 mm from MB1 canal towards the palatal canal with an Enac ultrasonic tip (ST 21, Osada, Japan). In each group, the canals were prepared with Gates Glidden burs and K-files. The distal and palatal roots were then removed, and Indian ink was injected into the canal system within the mesio-buccal root. The root surfaces were washed with 6% NaOCl, and then rendered transparent to observe canal morphology. The root canal configurations were classified into five categories following the modified Weine's classification. RESULTS: More than one canal in the mesio-buccal root was observed in 48% of specimens. Detection rates of multiple canals were 7, 18 and 42% following stages 1, 2 and 3, respectively. There was a significant difference between the stages for detecting the MB2 canal (P < 0.05, Friedman test). CONCLUSIONS: Both magnification (stage 2) and dentine removal under magnification (stage 3) were effective in detecting the presence of the MB2 canal. However, MB2 canals could not be detected in 13% of the teeth because of canal calcification or branching located more apically.     

上颌第一、第二恒磨牙牙根和根管系统的锥形束CT研究

目的：运用锥形束CT（CBCT）观察中国人群双侧上颌第一、第二磨牙的牙根和根管系统的解剖形态,为临床根管治疗提供依据。方法：选择200名患者的双侧上颌第一、第二恒磨牙（上颌第一恒磨牙354颗、上颌第二恒磨牙360颗）的CBCT扫描数据,使用NNT软件分析上颌第一、第二恒磨牙的牙根数、根管数、根管分型以及双侧对称情况。结果：上颌第一、第二磨牙主要为三根（99.44%和84.44%）。上颌第二磨牙的单根和双根较多见（15.28%）,其根管系统形态复杂,在根尖区有融合趋势。上颌第一磨牙的根管系统主要为3根四根管（78.97%）。上颌第二磨牙的三根管和四根管发现率接近（分别为47.37%和51.64%）。上颌第一磨牙的近颊根管系统主要根管分型为：Ⅳ型（57.79%）、Ⅱ型（19.83%）和Ⅰ型（15.58%）。上颌第二磨牙的近颊根管系统主要根管分型为：Ⅰ型（48.14%）、Ⅳ型（30.43%）和Ⅱ型（17.39%）。上颌第一、第二磨牙的远颊根和腭根主要为单根单根管,存在少量和罕见的变异。上颌第一、第二磨牙近颊根的根管数目和根管分型左右对称。结论：上颌第一磨牙近颊根管系统变异普遍存在,MB2根管为其主要的变异形式。上颌第二磨牙牙根数目和根管形态变异类型多,单根牙和双根牙的根管走向复杂多变。CBCT可以为识别根管形态提供准确依据。     

上颌第二恒磨牙近中颊根第二根管的离体牙研究

目的研究上颌第二恒磨牙近中颊根第二根管（MB2）的发生情况,为提高上颌第二恒磨牙根管治疗的成功率提供解剖学基础。方法于山东地区收集离体上颌第二恒磨牙118颗,采用斜方型开髓洞型开髓,利用小号C型锉探查并疏通根管,记录MB2的发现率及扩通率;拍摄X线牙片,记录近中颊根的根管数目、形态和类型;在根管显微镜下观察并应用数显卡尺测量近中颊根主根管和MB2根管口之间的距离,确定根管口的位置;记录近中颊根的根尖孔数目,并测量解剖根尖孔至解剖根尖的距离。结果118颗上颌第二恒磨牙中,有58颗发现MB2,发现率为49.15%;其中48颗牙齿的MB2被扩通,扩通率为82.76%。108颗3根牙中,近中颊根的根管形态为Ⅰ型者有50颗,占46.30%;Ⅱ型及Ⅲ型者分别为14和34颗,占12.96%和31.48%。近中颊根主根管口与MB2根管口的平均距离为1.26 mm;近中颊根解剖根尖孔至解剖根尖的距离平均值为1.13 mm。结论山东地区上颌第二恒磨牙MB2的发现率较高,临床治疗中采用改良的斜方型开髓孔有利于发现MB2,用X线片确定工作长度时需要结合临床综合判断根尖孔的位置。