Rapid screening of rpoB and katG mutations in Mycobacterium tuberculosis isolates by high-resolution melting curve analysis

Background: Early detection of multidrug-resistant tuberculosis (MDR-TB) is essential to prevent its transmission in the community and initiate effective anti-TB treatment regimen. Materials and Methods: High-resolution melting curve (HRM) analysis was evaluated for rapid detection of resistance conferring mutations in rpoB and katG genes. We screened 95 Mycobacterium tuberculosis clinical isolates including 20 rifampin resistant (RIF-R), 21 isoniazid resistant (INH-R) and 54 fully susceptible (S) isolates determined by proportion method of drug susceptibility testing. Nineteen M. tuberculosis isolates with known drug susceptibility genotypes were used as references for the assay validation. The nucleotide sequences of the target regions rpoB and katG genes were determined to investigate the frequency and type of mutations and to confirm HRM results. Results: HRM analysis of a 129-bp fragment of rpoB allowed correct identification of 19 of the 20 phenotypically RIF-R and all RIF-S isolates. All INH-S isolates generated wild-type HRM curves and 18 out of 21 INH-R isolates harboured any mutation in 109-bp fragment of katG exhibited mutant type HRM curves. However, 1 RIF-R and 3 INH-R isolates were falsely identified as susceptible which were confirmed for having no mutation in their target regions by sequencing. The main mutations involved in RIF and INH resistance were found at codons rpoB531 (60% of RIF-R isolates) and katG315 (85.7% of INH-R isolates), respectively. Conclusion: HRM was found to be a reliable, rapid and low cost method to characterise drug susceptibility of clinical TB isolates in resource-limited settings.     

Prospective evaluation of pyrosequencing for the rapid detection of isoniazid and rifampin resistance in clinical <Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis> isolates

A pyrosequencing-based method for the rapid detection of isoniazid (INH) and rifampin (RIF) resistance in Mycobacterium tuberculosis was evaluated in clinical practice. The method can detect the INH resistance-causing katG315 mutation, and all mutations in the RIF resistance-determining rpoB core region, in less than 6 h from cultured isolates. The method was first validated with 42 isolates, and was subsequently prospectively evaluated with 91 isolates, including clinical isolates and external quality control assessment strains, over a period of 2.5 years. The pyrosequencing results of clinical isolates were available, on average, 19 days earlier (median 19 days; range 3–43 days) than conventional susceptibility testing results. The composite data showed that the sensitivity of pyrosequencing for detecting resistance correctly was 66.7% for INH and 97.4% for RIF. The specificity of pyrosequencing was 100% for both drugs. Acceptable sensitivity for detecting resistance and the rapidness of pyrosequencing make it a valuable tool in the clinical setting.     

Simplified Microarray System for Simultaneously Detecting Rifampin,Isoniazid, Ethambutol,and Streptomycin Resistance Markers in Mycobacterium tuberculosis

We developed a simplified microarray test for detecting and identifying mutations in rpoB, katG, inhA, embB, and rpsL and compared the analytical performance of the test to that of phenotypic drug susceptibility testing (DST). The analytical sensitivity was estimated to be at least 110 genome copies per amplification reaction. The microarray test correctly detected 95.2% of mutations for which there was a sequence-specific probe on the microarray and 100% of 96 wild-type sequences. In a blinded analysis of 153 clinical isolates, microarray sensitivity for first-line drugs relative to phenotypic DST (true resistance) was 100% for rifampin (RIF) (14/14), 90.0% for isoniazid (INH) (36/40), 70% for ethambutol (EMB) (7/10), and 89.1% (57/64) combined. Microarray specificity (true susceptibility) for first-line agents was 95.0% for RIF (132/139), 98.2% for INH (111/113), and 98.6% for EMB (141/143). Overall microarray specificity for RIF, INH, and EMB combined was 97.2% (384/395). The overall positive and negative predictive values for RIF, INH, and EMB combined were 84.9% and 98.3%, respectively. For the second-line drug streptomycin (STR), overall concordance between the agar proportion method and microarray analysis was 89.5% (137/153). Sensitivity was 34.8% (8/23) because of limited microarray coverage for STR-conferring mutations, and specificity was 99.2% (129/130). All false-susceptible discrepant results were a consequence of DNA mutations that are not represented by a specific microarray probe. There were zero invalid results from 220 total tests. The simplified microarray system is suitable for detecting resistance-conferring mutations in clinical M. tuberculosis isolates and can now be used for prospective trials or integrated into an all-in-one, closed-amplicon consumable.     

Detection of Mycobacterium tuberculosis resistance mutations to rifampin and isoniazid by real-time PCR

Objective: The objective of our study was to evaluate the use of a real-time polymerase chain reaction (PCR)-based technique for the prediction of phenotypic resistance of Mycobacterium tuberculosis. Materials and Methods: We tested 67 M tuberculosis strains (26 drug resistant and 41 drug susceptible) using a method recommended for the LightCycler platform. The susceptibility testing was performed by the absolute concentration method. For rifampin resistance, two regions of the rpoB gene were targeted, while for identification of isoniazid resistance, we searched for mutations in katG and inhA genes. Results: The sensitivity and specificity of this method for rapid detection of mutations for isoniazid resistance were 96% (95% CI: 88% to 100%) and 95% (95% CI: 89% to 100%), respectively. For detection of rifampin resistance, the sensitivity and specificity were 92% (95% CI: 81% to 100%) and 74% (95% CI: 61% to 87%), respectively. The main isoniazid resistance mechanism identified in our isolates is related to changes in the katG gene that encodes catalase. We found that for rifampin resistance the concordance between the predicted and observed phenotype was less than satisfactory. Conclusions: Using this method, the best accuracy for genotyping compared with phenotypic resistance testing was obtained for detecting isoniazid resistance mutations. Although real-time PCR assay may be a valuable diagnostic tool, it is not yet completely satisfactory for detection of drug resistance mutations in M tuberculosis.     

High-Resolution Melting Curve Analysis for Rapid Detection of Rifampin and Isoniazid Resistance in Mycobacterium tuberculosis Clinical Isolates

We evaluated high-resolution melting (HRM) curve analysis as a tool for detecting rifampin (RIF) and isoniazid (INH) resistance in Mycobacterium tuberculosis in an accurate, affordable, and rapid manner. Two hundred seventeen M. tuberculosis clinical isolates of known resistance phenotype were used. Twenty-nine known rpoB mutant DNAs, including rare mutations, were also included. Four pairs of primers were designed: rpoB-F/R (for codons 516 to 539 of rpoB), rpoB-516F/R (for codons 508 to 536 of rpoB), katG-F/R (for the codon 315 region of katG), and inhA-F/R (for the nucleotide substitution of C to T at position −15 of inhA). An HRM curve was generated for each isolate after real-time PCR differentiated the mutant from the wild-type strains. DNA sequencing of the target regions was performed to confirm the results of the HRM curve analysis. All but one of the 73 RIF-resistant (RIF-R) strains and all 124 RIF-susceptible (RIF-S) isolates were correctly identified by HRM curve analysis of rpoB. Twenty-seven of 29 known rpoB mutants were detected. In HRM curve analysis of katG and inhA, 90 INH-R strains that harbored katG or inhA mutations, or both, and all INH-S strains were correctly identified. Ten phenotypically INH-R strains not harboring katG or inhA mutations were not detected. The HRM curve analysis will be a useful method for detection of RIF and INH resistance in M. tuberculosis in a rapid, accurate, simple, and cost-effective manner.The rates of mortality and morbidity from tuberculosis (TB) remain high, despite intense worldwide efforts. One of the major factors sustaining the current TB epidemic is the increasing drug resistance of Mycobacterium tuberculosis strains (2). In the early 1990s, multidrug-resistant (MDR) TB cases that were resistant to at least rifampin (RIF) plus isoniazid (INH) arose (6). When the frequency and distribution of extensively drug-resistant (XDR) TB cases were assessed in 2004 by the U.S. Centers for Disease Control and Prevention and the World Health Organization, several cases of drug-resistant tuberculosis consistent with an XDR phenotype were found (7). This study revealed that 20% of the isolates met the MDR criteria; 2% of those were classifiable as XDR; and 4%, 15%, and 19% of the XDR TB cases were from the United States, South Korea, and Latvia, respectively (7). Thus, it is crucial that rapid drug susceptibility tests be developed to prevent the spread of MDR and XDR TB.Although drug susceptibility testing (DST) is a prerequisite for accurate results, such testing requires much time and labor (3). Therefore, several molecular techniques have been applied to detect mutations related to drug resistance (5, 10). Resistance to RIF and INH, the mainstays of antituberculosis treatment, is mainly attributable to mutations in genes encoding the drug target or drug-converting enzymes (8). Early studies demonstrated that 95% of the resistance to RIF is associated with mutation of the RIF resistance-determining region of rpoB, whereas mutations in katG and the regulatory zone of inhA are most frequently associated with INH resistance (11).The oligonucleotide chip method and real-time PCR have been used for detection of drug-resistant M. tuberculosis (17, 21, 27, 29). A novel method of high-resolution melting (HRM) curve analysis is an accurate and simple technique for analyzing the genotype without the need for specific probes. The dye LC Green, SYTO9, or Eva Green saturates amplified DNA, unlike SYBR green dye, during homogeneous melting curve analysis. Also, HRM curve analysis generates a difference plot curve, which analyzes nucleic acid sequences with high accuracy. Application of genotyping by HRM curve analysis has followed (13, 19). The aim of the study described here was to develop a useful molecular tool for the identification of drug resistance in M. tuberculosis in an accurate, rapid, and cost-effective manner.     

Magnitude of Gene Mutations Conferring Drug Resistance in Mycobacterium Tuberculosis Isolates from Lymph Node Aspirates in Ethiopia

Objective: Resistance to drugs is due to particular genomic mutations in the specific genes of Mycobacterium tuberculosis. Timely genetic characterization will allow identification of resistance mutations that will optimize an effective antibiotic treatment regimen. We determine the magnitude of gene mutations conferring resistance to isoniazid (INH), rifampicin (RMP) and ethambutol (EMB) among tuberculosis (TB) lymphadenitis patients.Methods: A cross sectional prospective study was conducted among 226 M.tuberculosis isolates from culture positive lymph node aspirates collected from TB lymphadenitis patients between April 2012 and May 2012. Detection of mutations conferring resistance to drugs was carried out using GenoType^® MTBDRplus and GenoType® MTBDRsl assay.Results: Out of the 226 strains, mutations conferring resistance to INH, RMP, multidrug resistance tuberculosis (MDR-TB) and EMB were 8, 3, 2 and 2 isolates, respectively. There was no isolated strain that showed mutation in the inhA promoter region gene. All INH resistant strains had mutations in the katG gene at codon 315 with amino acid change of S315T1. Among rifampicin resistant strains, two isolates displayed mutations at codon 531 in the rpoB gene with amino acid change of S531L and one isolate was by omission of wild type probes at Q513L. According to mutations associated with ethambutol resistance, all of the isolates had mutations in the embB gene with aminoacid change of M306I. All isolates resistant to INH, RMP and MDR using BacT/AlerT 3D system were correctly identified by GenoType® MTBDRplus assay.Conclusion: We observed mutations conferring resistance to INH at S315T1 of the katG gene, RMP at S531L and Q513L in the rpoB genes and EMB at M306I of the embB gene. In the absence of conventional drug susceptibility testing, the effort to develop easy, rapid and cost effective molecular assays for drug resistance TB monitoring is definitely desirable and the GenoType® MTBDRplus assay was found to be a useful method for diagnosis of resistance to INH, RMP and MDR from lymph node aspirates. Further molecular cluster analysis to determine transmission dynamics of mutated strain is required.     

Rapid and accurate detection of rifampin and isoniazid-resistant Mycobacterium tuberculosis using an oligonucleotide array

To rapidly detect rifampin, isoniazid and multidrug resistance in Mycobacterium tuberculosis isolates, a new system (BluePoint MtbDR, Bio Concept Inc., Taichung, Taiwan) including an oligonucleotide array and an automatic reader was evaluated. The array simultaneously identifies M. tuberculosis and predominant mutations in the rpoB, katG and inhA upstream regulatory region (inhA-r) genes. The system was assessed with 324 clinical M. tuberculosis isolates, including 210 multidrug-resistant, 41 rifampin mono-resistant, 34 isoniazid mono-resistant and 39 fully susceptible isolates. The results were compared with those obtained using the GenoType MTBDRplus test, drug-resistant gene sequencing and conventional drug susceptibility testing. The detection limit of the array was 25 pg DNA. The array and the GenoType MTBDRplus test detected 179 (85.2%) and 182 (86.7%) multidrug-resistant M. tuberculosis strains, respectively. The sensitivities of the array for detecting rifampin and isoniazid resistance were 98.4% and 87.7%, respectively, whereas the sensitivities of the GenoType MTBDRplus test for detecting rifampin and isoniazid resistance were 98.8% and 88.9%, respectively. No significant difference was found between the tests with respect to their sensitivities to detect multidrug resistance (p 0.66), rifampin resistance (p 0.69) or isoniazid resistance (p 0.68). The discrepancies were mainly attributed to rare mutations in inhA-r, which were not included in the array. The array can directly reveal transmission-associated mutations, which are useful for epidemiological investigations. The turnaround time of the array test was 6–7 h. This study confirms the feasibility of using this system for rapid and accurate diagnosis of isoniazid and rifampin resistance in M. tuberculosis.     

Rapid Detection of Isoniazid Resistance in Mycobacterium tuberculosis Isolates by Use of Real-Time-PCR-Based Melting Curve Analysis

The MeltPro TB/INH assay, recently approved by the Chinese Food and Drug Administration, is a closed-tube, dual-color, melting curve analysis-based, real-time PCR test specially designed to detect 30 isoniazid (INH) resistance mutations in katG position 315 (katG 315), the inhA promoter (positions −17 to −8), inhA position 94, and the ahpC promoter (positions −44 to −30 and −15 to 3) of Mycobacterium tuberculosis. Here we evaluated both the analytical performance and clinical performance of this assay. Analytical studies with corresponding panels demonstrated that the accuracy for detection of different mutation types (10 wild-type samples and 12 mutant type samples), the limit of detection (2 × 10³ to 2 × 10⁴ bacilli/ml), reproducibility (standard deviation [SD], <0.4°C), and the lowest heteroresistance level (40%) all met the parameters preset by the kit. The assay could be run on five types of real-time PCR machines, with the shortest running time (105 min) obtained with the LightCycler 480 II. Clinical studies enrolled 1,096 clinical isolates collected from three geographically different tuberculosis centers, including 437 INH-resistant isolates and 659 INH-susceptible isolates characterized by traditional drug susceptibility testing on Löwenstein-Jensen solid medium. The clinical sensitivity and specificity of the MeltPro TB/INH assay were 90.8% and 96.4%, respectively. DNA sequencing analysis showed that, except for the 5 mutants outside the detection range of the MeltPro assay, a concordance rate between the two methods of 99.1% (457/461) was obtained. Among the 26 mutation types detected, katG S315T (AGC→ACC), inhA −15C→T, katG S315N (AGC→AAC), and ahpC promoter −10C→T accounted for more than 90%. Overall, the MeltPro TB/INH assay represents a reliable and rapid tool for the detection of INH resistance in clinical isolates.     

Evaluation of GenoFlow DR-MTB Array Test for Detection of Rifampin and Isoniazid Resistance in Mycobacterium tuberculosis

The aim of this study was to evaluate the GenoFlow DR-MTB array test (DiagCor Bioscience, Hong Kong) on 70 cultured isolates and 50 sputum specimens. The GenoFlow array test showed good sensitivity and specificity compared to the phenotypic Bactec 460TB. This array accurately detected mutations in rpoB, katG, and inhA associated with resistance to rifampin and isoniazid.     

Rolling circle amplification and multiplex allele-specific PCR for rapid detection of katG and inhA gene mutations in Mycobacterium tuberculosis

The aim of the study was to compare a novel, rolling circle amplification (RCA) assay for detection of common isoniazid (INH) resistance mutations in Mycobacterium tuberculosis with a multiplex allele-specific PCR (MAS-PCR) and sequencing of katG and the fabG1-inhA promoter region. One or more mutations were identified by RCA, MAS-PCR, and sequencing in 21 (68%), 22 (71%), and 23 (74%), respectively, of 31 epidemiologically unrelated INH-resistant isolates, and in none of 8 INH-susceptible isolates. The RCA assay is a rapid, inexpensive, and practical screening method for INH resistance in M. tuberculosis in countries with high prevalence of INH resistance.     

Multidrug-resistant tuberculosis: rapid detection of resistance to rifampin and high or low levels of isoniazid in clinical specimens and isolates

The aim of the present study was to evaluate a new improved multiplex polymerase chain reaction (PCR) hybridisation assay to detect multidrug-resistant tuberculosis. The assay, developed to detect rifampin (rpoB) and isoniazid (katG) gene mutations causing Mycobacterium tuberculosis resistance, was recently extended to include inhA gene mutations that code for low-level isoniazid resistance. Interpretable results were obtained in 115 isolates and in all smear-positive clinical specimens. Rifampin resistance was correctly identified in all specimens and in 20 of 21 (95%) multidrug-resistant isolates compared to BACTEC 460TB. Isoniazid resistance correlated in 18 of 22 (82%) specimens, in 31 of 31 (100%) high-level and 24 of 28 (86%) low-level isoniazid-resistant isolates. The assay was rapid, easy to perform and directly applicable in smear-positive specimens. We predict that the assay may be a useful tool to combat and prevent new cases of multi- and extensively drug-resistant tuberculosis.     

Genotypic analysis of genes associated with isoniazid and ethionamide resistance in MDR-TB isolates from Thailand

Nucleotide sequences of genes conferring isoniazid resistance (katG, inhA, oxyR–ahpC and ndh) and ethionamide resistance (ethA) in 160 drug-resistant Mycobacterium tuberculosis clinical isolates from Thailand were analysed. Mutations in the katG gene were found in 129 isolates, predominantly at codon 315, which was mutated in 127 isolates. Twenty-two isolates had mutations in the inhA promoter and coding region. Mutations in the oxyR–ahpC intergenic region and in ndh were detected in four and one isolate(s), respectively. Of 24 ethionamide-resistant isolates, 13 had mutations in the ethA gene. However, these mutations were dispersed along the entire gene, with no codon predominating significantly.     

Multidrug-Resistant Mycobacterium tuberculosis of the Latin American Mediterranean Lineage,Wrongly Identified as Mycobacterium pinnipedii (Spoligotype International Type 863 [SIT863]), Causing Active Tuberculosis in South Brazil

We recently detected the spoligotype patterns of strains of Mycobacterium pinnipedii, a species of the Mycobacterium tuberculosis complex, in sputum samples from nine cases with pulmonary tuberculosis residing in Porto Alegre, South Brazil. Because this species is rarely encountered in humans, we further characterized these nine isolates by additional genotyping techniques, including 24-locus mycobacterial interspersed repetitive-unit–variable-number tandem-repeat (MIRU-VNTR) typing, verification of the loci TbD1, RD9, pks15/1, RD^Rio, and fbpC, the insertion of IS6110 at a site specific to the M. tuberculosis Latin American Mediterranean (LAM) lineage, and whole-genome sequencing. The combined analysis of these markers revealed that the isolates are in fact M. tuberculosis and more specifically belong to the LAM genotype. Most of these isolates (n = 8) were shown to be multidrug resistant (MDR), which prompted us to perform partial sequencing of the rpoA, rpoB, rpoC, katG, and inhA genes. Seven isolates (77.8%) carried the S315T mutation in katG, and one of these (11%) also presented the C(−17)T single-nucleotide polymorphism (SNP) in inhA. Interestingly, six of the MDR isolates also presented an undescribed insertion of 12 nucleotides (CCA GAA CAA CCC) in codon 516 of rpoB. No putative compensatory mutation was found in either rpoA or rpoC. This is the first report of an M. tuberculosis LAM family strain with a convergent M. pinnipedii spoligotype. These spoligotypes are observed in genotype databases at a modest frequency, highlighting that care must be taken when identifying isolates in the M. tuberculosis complex on the basis of single genetic markers.     

Performance Assessment of the GenoType MTBDRplus Test and DNA Sequencing in Detection of Multidrug-Resistant Mycobacterium tuberculosis

To facilitate the management of multidrug-resistant (MDR) tuberculosis, two nucleic acid sequence-based methods, the GenoType MTBDRplus test and DNA sequencing, were assessed for the rapid detection of drug-resistant Mycobacterium tuberculosis for the first time in the Asia-Pacific region. The performances of these two assays in detecting the presence of rifampin (rifampicin) (RIF) and isoniazid (INH) resistance-associated mutations in the rpoB, katG, inhA regulatory region, inhA, and oxyR-ahpC genes were compared to that of a conventional agar proportion drug susceptibility test. A total of 242 MDR and 30 pansusceptible M. tuberculosis isolates were evaluated in this study. The sensitivities obtained for RIF-resistant detection by the GenoType MTBDRplus test and by resistance gene sequencing were 95.5% and 97.9%, respectively. The sensitivities for INH resistance detection by the GenoType MTBDRplus test and by resistance gene sequencing were 81.8% and 93.4%, respectively. Together, the sensitivity for MDR tuberculosis detection was 78.5% with the GenoType MTBDRplus test and 91.3% by resistance gene sequencing. The specificity for RIF resistance, INH resistance, and MDR detection was 100% by both methods. The GenoType MTBDRplus test has the advantage of a short turnaround time for drug-resistant M. tuberculosis detection. Overall, the two assays performed equally well in detecting RIF resistance (P = 0.13). However, DNA sequencing demonstrated superior performance in detecting INH resistance (P < 0.001) and MDR tuberculosis (P < 0.001). We suggest that new alleles of INH resistance genes should be evaluated to improve the sensitivity of the GenoType MTBDRplus test, especially for different geographic areas with genetically diverse M. tuberculosis strains.The emergence of multidrug-resistant tuberculosis (MDR-TB), defined as infection with a Mycobacterium tuberculosis complex isolate resistant to at least isoniazid (INH) and rifampin (rifampicin) (RIF), is a public health concern and threatens global TB control programs (22). In Taiwan, approximately 15,000 new TB cases are diagnosed annually, of which an estimated 4% are MDR-TB (12). Therefore, the Taiwan Centers for Disease Control (CDC) not only has strengthened directly observed treatment in the management of TB as of 2006, to prevent MDR generation, but also has implemented a DOTS-Plus (directly observed treatment, short-course) strategy for the management of MDR-TB patients as of 2007 (8). However, this program can be hampered by delayed laboratory diagnosis. The completion of diagnosis by conventional methods and drug susceptibility testing (DST) of M. tuberculosis normally take months.The World Health Organization and partners have endorsed the use of the molecular test GenoType MTBDRplus (Hain Lifescience GmbH, Nehren, Germany) for rapid detection of high-risk MDR-TB cases, even directly from certain clinical specimens (1, 4, 6, 10, 15, 21). The GenoType MTBDRplus test is a PCR-based amplification and reverse blotting assay that employs specific probes hybridized to nitrocellulose strips to detect RIF and INH resistance. The assay detects mutations in the rpoB gene for RIF resistance, in the katG gene for high-level INH resistance, and in the inhA regulatory region gene for low-level INH resistance. To evaluate the reliability of the assay, DNA sequencing analyses of rpoB for RIF and katG, the inhA regulatory region gene, inhA, or oxyR-ahpC for INH were conducted in parallel.Our previous study demonstrated the genetic diversity of MDR M. tuberculosis isolates with novel alleles in the rpoB gene in Taiwan (11). Likewise, the distribution of M. tuberculosis isolates differs in different geographic regions (5, 11). The GenoType MTBDRplus test has been assessed in Europe (6, 10, 15, 21), South Africa (4), and the Caribbean (1), but not in the Asia-Pacific region, where there is a high prevalence of Beijing family M. tuberculosis isolates. Here we report the performance of the revised GenoType MTBDRplus test compared to that of DNA sequencing using a culture-based phenotypic DST, which is considered the gold standard for routine clinical practice.     

Predicting Extensively Drug-Resistant Mycobacterium tuberculosis Phenotypes with Genetic Mutations

Molecular diagnostic methods based on the detection of mutations conferring drug resistance are promising technologies for rapidly detecting multidrug-/extensively drug-resistant tuberculosis (M/XDR TB), but large studies of mutations as markers of resistance are rare. The Global Consortium for Drug-Resistant TB Diagnostics analyzed 417 Mycobacterium tuberculosis isolates from multinational sites with a high prevalence of drug resistance to determine the sensitivities and specificities of mutations associated with M/XDR TB to inform the development of rapid diagnostic methods. We collected M/XDR TB isolates from regions of high TB burden in India, Moldova, the Philippines, and South Africa. The isolates underwent standardized phenotypic drug susceptibility testing (DST) to isoniazid (INH), rifampin (RIF), moxifloxacin (MOX), ofloxacin (OFX), amikacin (AMK), kanamycin (KAN), and capreomycin (CAP) using MGIT 960 and WHO-recommended critical concentrations. Eight genes (katG, inhA, rpoB, gyrA, gyrB, rrs, eis, and tlyA) were sequenced using Sanger sequencing. Three hundred seventy isolates were INH^r, 356 were RIF^r, 292 were MOX^r/OFX^r, 230 were AMK^r, 219 were CAP^r, and 286 were KAN^r. Four single nucleotide polymorphisms (SNPs) in katG/inhA had a combined sensitivity of 96% and specificities of 97 to 100% for the detection of INH^r. Eleven SNPs in rpoB had a combined sensitivity of 98% for RIF^r. Eight SNPs in gyrA codons 88 to 94 had sensitivities of 90% for MOX^r/OFX^r. The rrs 1401/1484 SNPs had 89 to 90% sensitivity for detecting AMK^r/CAP^r but 71% sensitivity for KAN^r. Adding eis promoter SNPs increased the sensitivity to 93% for detecting AMK^r and to 91% for detecting KAN^r. Approximately 30 SNPs in six genes predicted clinically relevant XDR-TB phenotypes with 90 to 98% sensitivity and almost 100% specificity.     

Unequal distribution of resistance-conferring mutations among Mycobacterium tuberculosis and Mycobacterium africanum strains from Ghana

Isoniazid (INH) and rifampicin (RMP) resistance in Mycobacterium tuberculosis complex (MTC) isolates are mainly based on mutations in a limited number of genes. However, mutation frequencies vary in different mycobacterial populations. In this work, we analyzed the distribution of resistance-associated mutations in M. tuberculosis and M. africanum strains from Ghana, West Africa. The distribution of mutations in katG, fabG1-inhA, ahpC, and rpoB was determined by DNA sequencing in 217 INH-resistant (INH^r) and 45 multidrug-resistant (MDR) MTC strains isolated in Ghana from 2001 to 2004. A total of 247 out of 262 strains investigated (94.3%) carried a mutation in katG (72.5%), fabG1-inhA (25.1%), or ahpC (6.5%), respectively. M. tuberculosis strains mainly had katG 315 mutations (80.1%), whereas this proportion was significantly lower in M. africanum West-African 1 (WA1) strains (43.1%; p < 0.05). In contrast, WA1 strains showed more mutations in the fabG1-inhA region (39.2%, p < 0.05) compared to M. tuberculosis strains (20.9%). In 44 of 45 MDR strains (97.8%) mutations in the 81-bp core region of the rpoB gene could be verified. Additionally, DNA sequencing revealed that 5 RMP-susceptible strains also showed mutations in the rpoB hotspot region. In conclusion, although principally the same genes were affected in INH^rM. tuberculosis and M. africanum strains, disequilibrium in the distribution of mutations conferring resistance was verified that might influence the efficiency of molecular tests for determination of resistance.     

Significance ofahpC promoter mutations for the prediction of isoniazid resistance inMycobacterium tuberculosis

To determine the value ofahpC promoter mutations for the rapid prediction of isoniazid resistance, this genomic region was characterized in 50 isoniazid-resistant and 12 isoniazid-sensitiveMycobacterium tuberculosis isolates. Of the resistant isolates, 12 hadahpC promoter mutations, but only one possessed both anahpC promoter mutation and akatG codon 315 substitution, although the latter was found in the majority (54%) of the isoniazid-resistant isolates investigated. This investigation presents empirical evidence that the central portion of theahpC promoter is the most valuable genetic locus to complementkatG codon 315 characterizations in order to increase the sensitivity of molecular tests for the prediction of isoniazid resistance.     

Detection of novel mutations associated with independent resistance and cross-resistance to isoniazid and prothionamide in Mycobacterium tuberculosis clinical isolates

ObjectivesProthionamide, a structural analogue of isoniazid, is used mainly for treating multidrug-resistant tuberculosis (MDR-TB). Both drugs have a common target InhA, so prothionamide can be ineffective against isoniazid-resistant (INH^R) Mycobacterium tuberculosis. We aimed to investigate the prevalence of mutations in katG, ethA, ndh, ethR, mshA, inhA and/or its promoter associated with independent resistance and cross-resistance to INH^R and/or prothionamide-resistant (PTO^R) M. tuberculosis isolates.MethodsWe sequenced the above genes in 206 M. tuberculosis isolates with susceptibility testing against ten drugs.ResultsOf the 173 INH^R PTO^R isolates, 170 (98.3%) harboured mutations in katG, 111 (64.2%) in ethA, 58 (33.5%) in inhA or its promoter, 5 (2.9%) in ndh, 3 (1.7 %) in ethR and 2 (1.2%) in mshA. Among the 18 INH^R PTO^S isolates, mutations in katG were found in all of them; one had a mutation in the inhA promoter and another in ndh. Of the five INH^S PTO^R isolates, four showed mutations in ethA and two in the inhA promoter. Notably, 55 novel non-synonymous mutations were found in them and 20.2% of the PTO^R M. tuberculosis isolates harboured no known mutations.ConclusionsThis is the first report to investigate cross-resistance between INH^R and/or PTO^R isolates. Among INH^R (94.4% MDR-TB) M. tuberculosis isolates, the high diversity of mutations for independent resistance and cross-resistance with prothionamide highlight the importance of both phenotypic susceptibility and genotypic diagnosis when using it to treat patients with INH^R-TB. The high proportion (one-fifth) of PTO^R M. tuberculosis isolates showed no known mutation related to PTO^R genes, so uncovered resistance mechanism(s) of prothionamide exist.     

Discordance between Xpert MTB/RIF Assay and Bactec MGIT 960 Culture System for Detection of Rifampin-Resistant Mycobacterium tuberculosis Isolates in a Country with a Low Tuberculosis (TB) Incidence

Among 452 samples that were positive by the Xpert MTB/RIF (Xpert) assay and MGIT 960 system (MGIT), 440 and 10 Mycobacterium tuberculosis samples were detected as rifampin susceptible and rifampin resistant, respectively. Two isolates that were rifampin susceptible by the MGIT system were rifampin resistant by the Xpert assay. rpoB sequencing identified a silent (CTG521TTG) mutation in one isolate and a missense (GAC516TAC) mutation in another. The detection of rifampin resistance is imperfect with both the Xpert assay and MGIT system. Any discordant rifampin resistance results should be confirmed by sequencing of the rpoB gene.