Minimally invasive lateral mass screws in the treatment of cervical facet dislocations: technical note

OBJECTIVE: The technique of lateral mass screw and rod or plate fixation is a major advancement in the posterior instrumentation of the cervical spine. This technique provides rigid three-dimensional fixation, restores the dorsal tension band, and provides highly effective stabilization in patients with many types of traumatic injuries. METHODS: Patient 1 was a 32-year-old man who had been in a motor vehicle accident. He presented with right C5 radiculopathy. X-ray findings included 45% anterolisthesis of C4 on C5, bilateral facet disruption, and right unilateral C4-C5 facet fracture and dislocation. The patient was placed in Gardner-Wells tongs, and the fracture was reduced with 25 pounds of traction. Patient 2 was a 56-year-old woman who had been in a motor vehicle accident that resulted in complete quadriplegia. Her initial imaging studies revealed a C3-C4 right unilateral facet fracture with subluxation. She was placed in traction, and her neurological status was reassessed. The findings of her neurological examination revealed improvement: she was found to have Brown-Séquard syndrome. Patient 3 was a 33-year-old man who was involved in a diving accident that resulted in bilaterally jumped facets at C3-C4. The patient was neurologically intact, and attempts at closed reduction were not successful. RESULTS: Patients 1 and 2 underwent anterior cervical discectomy with iliac crest autograft fusion and plating. They were then placed in the prone position, and a dilator tubular retractor system was used to access the facet joint at the level of interest. The facet joints were then denuded and packed with autograft. Lateral mass screws were then placed by means of the Magerl technique, and a rod was used to connect the top-loading screws. Patient 3 underwent posterior surgery that included only removal of the superior facet, intraoperative reduction, and bilateral lateral mass screw and rod placement. CONCLUSION: This technical note describes the successful placement of lateral mass screw and rod constructs with the use of a minimally invasive approach by means of a tubular dilator retractor system. This approach preserves the integrity of the muscles and ligaments that maintain the posterior tension band of the cervical spine.     

Spine update: cervical spine internal fixation using screw and screw-plate constructs

Screw and screw-plate constructs have been used successfully in fixation of the cervical spine. This update focuses on the indications, complications, and nuances in the technique used for odontoid screws, transarticular C1-C2 screws, occipitocervical plating, posterior lateral mass screws, pedicle screws, and anterior plating.     

Pedicle screw fixation in the cervical spine

Pedicle screw fixation of the lower cervical spine is a new technique that provides an alternative to posterior lateral mass plating. Although biomechanical studies support the use of pedicle screws to reconstruct the cervical spine, placing screws into the small cervical pedicle poses a technical challenge. Penetration of the pedicle is the primary complication associated with screw insertion in the lower cervical spine. Pedicle screw fixation at the C2 and C7 pedicles in conjunction with use of plates for occipitocervical or cervicothoracic plating is becoming an accepted technique; however, pedicle screw fixation should not be routinely used at the C3-C6 levels. It may be indicated in patients who have osteoporotic bone or when rigid internal fixation cannot be achieved by conventional techniques.     

A biomechanical comparison of modern anterior and posterior plate fixation of the cervical spine

STUDY DESIGN: A biomechanical study was designed to assess relative rigidity provided by anterior, posterior, or combined cervical fixation using cadaveric cervical spine models for flexion-distraction injury and burst fracture. OBJECTIVES: To compare the construct stability provided by anterior plating with locked fixation screws, posterior plating with lateral mass screws, and combined anterior-posterior fixation in clinically simulated 3-column injury or corpectomy models. SUMMARY OF BACKGROUND DATA: Anterior plating with locked fixation screws is the most recent design and is found to provide better stability than the conventional unlocked anterior plating. However, there are few data on the direct comparison of biomechanical stability provided by anterior plating with locked fixation screws versus posterior plating with lateral mass screws. Biomechanical advantages of using combined anterior-posterior fixation compared with that of using either anterior or posterior fixation alone also have not been well investigated yet. METHODS: Biomechanical flexibility tests were performed using cervical spines (C2-T1) obtained from 10 fresh human cadavers. In group I (5 specimens), one-level, 3-column injury was created at C4-C5 by removing the ligamentum flavum and bilateral facet capsules, the posterior longitudinal ligament, and the posterior half of the intervertebral disc. In group II (5 specimens), complete corpectomy of C5 was performed to simulate burst injury. In each specimen, the intact spine underwent flexibility tests, and the following constructs were tested: (1) posterior lateral mass screw fixation (Axis plate) after injury; (2) polymethylmethacrylate anterior fusion block plus posterior fixation; (3) polymethylmethacrylate block plus anterior (Orion plate) and posterior plate fixation; and (4) polymethylmethacrylate block plus anterior fixation. Rotational angles of the C4-C5 (or C4-C6) segment were measured and normalized by the corresponding angles of the intact specimen to study the overall stabilizing effects. RESULTS: Posterior plating with an interbody graft showed effective stabilization of the unstable cervical segments in all loading modes in all cases. There was no significant stability improvement by the use of combined fixation compared with the posterior fixation with interbody grafting, although combined anterior-posterior fixation tended to provide greater stability than both anterior and posterior fixation alone. Anterior fixation alone was found to fail in stabilizing the cervical spine, particularly in the flexion-distraction injury model in which no contribution of posterior ligaments is available. Anterior plating fixation provided much greater fixation in the corpectomy model than in the flexion-distraction injury model. This finding suggests that preservation of the posterior ligaments may be an important factor in anterior plating fixation. CONCLUSIONS: This study showed that the posterior plating with interbody grafting is biomechanically superior to anterior plating with locked fixation screws for stabilizing the one-level flexion-distraction injury or burst injury. More rigid postoperative external orthoses should be considered if the anterior plating is used alone for the treatment of unstable cervical injuries. It was also found that combined anterior and posterior fixation may not improve the stability significantly as compared with posterior grafting with lateral mass screws and interbody grafting.     

Internal fixation of cervical trauma following corpectomy and reconstruction. The effects of posterior element injury

Although biomechanical data indicates that anterior fixation alone in unstable cervical injuries may not provide adequate stability, reports of clinical series indicate general success with this method of treatment. The specific contribution of posterior column injury to overall stability following reconstruction has not been evaluated. This study examined the biomechanical stability of anterior and/or posterior plate fixation following anterior corpectomy and reconstruction for unstable cervical injuries with varying degrees of posterior element injury. The C4-C6 motion segments of ten fresh frozen bovine cervical spines were used. After mounting, nondestructive mechanical testing in axial compression, torsion, flexion, extension, and lateral bending was done as an intact control. A C5 corpectomy with reconstruction using a synthetic bone graft was performed and the posterior ligaments sectioned at the C5-C6 level. Each specimen was sequentially instrumented with anterior and posterior plating alone and in combination and each construct was mechanically retested. The specimens were then further destabilized by bilateral facetectomies at C5-C6 and again tested with the same instrumentation combinations. In comparison to the controls, the spines with a C5 corpectomy/bone graft and posterior ligament rupture with anterior plating demonstrated significantly increased stiffness in flexion, extension, and lateral bending; posterior plating increased stiffness in only flexion and lateral bending. In axial compression and torsion, anterior or posterior plating demonstrated stiffness similar to the controls. Further destabilization by facetectomy significantly decreased stiffness of the instrumented construct (less than control) in torsion with anterior or posterior plate fixation alone. Combined plating showed increased stability compared to controls in all loading conditions for both patterns of instability. Anterior plating alone was able to restore the stability of the cervical spines with posterior ligamentous injury after corpectomy, but it failed to do so with the addition of bilateral facetectomies. For the unstable cervical spine with significant bilateral loss of posterior bony contact, anterior or posterior plating alone may not provide sufficient stabilization in the absence of any additional external immobilization. Combined plating should be considered, which may obviate the need for external immobilization.     

Minimally invasive tubular access for posterior cervical foraminotomy with three-dimensional microscopic visualization and localization with anterior/posterior imaging

Background contextPosterior cervical foraminotomy allows decompression of the nerve root with preservation of motion. A previously described endoscopic technique utilizes minimally invasive muscle splitting with routine outpatient discharge.PurposeThe approach allows a modified tubular retraction system to be used with three-dimensional visualization and anterior/posterior fluoroscopic imaging, thus allowing easy visualization even in large patients. This approach also allows safe docking of the retractor system on the lateral mass, thus avoiding the cervical spinal canal during exposure.Study designProne position is utilized, with localization and docking of instrumentation accomplished with anterior/posterior fluoroscopy. Surgery is performed with microscope-facilitated, three-dimensional visualization.MethodsPatients were placed in the prone position. Spinal needle localization was used for initial localization followed by a stab wound and placement of a 14-mm tube using sequentially enlarging dilators. Frequent use of anterior/posterior fluoroscopy avoided inadvertent medial placement of the instruments in the canal. A standard neurocapable operating microscope was used with 10X magnification and 400-mm focal length.ResultsA new minimally invasive posterior cervical approach was performed on 222 patients without dural penetration.ConclusionsPosterior foraminal cervical surgery with three-dimensional access and localization with anterior/posterior fluoroscopic imaging allows safe, reproducible docking on the cervical spine with subsequent exploration of the foramen and routine outpatient discharge. Complications related to difficulty with lateral localization in the lower cervical spine, and with inadvertent entry into the cervical spinal canal with possible catastrophic result are thus avoided.     

Minimally invasive cervical expansile laminoplasty: an initial cadaveric study

OBJECTIVE: Expansile laminoplasty has been successfully used to treat cervical myelopathy attributable to canal stenosis. However, detachment of the posterior cervical muscles is thought to contribute to postoperative axial neck pain and kyphosis. Minimizing the amount of muscular dissection might reduce the likelihood of these sequelae. METHODS: Six human cadaveric spines were used to assess the feasibility of a minimally invasive laminoplasty technique. A 22-mm tubular dilator port was used to access the lamina-facet junctions from C2 to C7, through bilateral stab incisions at C4-C5 and C5-C6. Troughs at the lamina-facet junctions were drilled bilaterally, and the contiguous laminae were lifted en bloc from one side. Ten-millimeter rib allograft spacers were inserted to maintain a gap on the open side. RESULTS: Exposure of six cervical levels was easily accomplished with two small incisions on each side. Drilling was achieved without dural violations. The midsagittal spinal canal diameter was increased by a mean of 38% and the spinal canal area was increased by an average of 43% at the level of C5. CONCLUSION: A minimally invasive approach for cervical laminoplasty could be performed in human cadavers. The measured increases in spinal canal space approximated those demonstrated to be associated with stabilization or improvement of neurological status.     

Arthroscopic Anterior Diskectomy of the Cervical Spine

We describe a minimally invasive arthroscopic technique for anterior diskectomy of the cervical spine. Fingertip pressure is applied between the carotid sheath laterally and the pharynx medially. The trachea and esophagus are displaced to the contralateral side. The disk level, soft-tissue thickness, and midline are verified with image intensification. A spinal needle is inserted through the soft tissue into the disk space at the midline. Contrast is injected to facilitate visualization. While maintaining displacement of the pharynx, a 4-mm vertical incision is made to incorporate the needle and is enlarged bluntly. A guidewire is passed through the needle. A dilator is passed over the guidewire, through the soft tissue, and usually into the disk, stopping posterior to the mid-vertebral body, as verified with lateral imaging. A cannula is placed over the dilator, and the dilator and wire are removed. Occasionally, the cannula is passed over the dilator to the anterior aspect of the disk, and the dilator is replaced with a trephine to penetrate the anterior spinal ligament, osteophytes, and annulus. The cannula seated in the middle of the disk allows diskectomy to commence with small rongeurs through the cannula, followed by a cervical spine arthroscope with a working channel. The arthroscope is removed, and further diskectomy is performed under fluoroscopic guidance with a motorized shaver and radiofrequency probe.     

Minimally invasive approaches to the cervical spine

Minimally invasive approaches and operative techniques are becoming increasingly popular for the treatment of cervical spine disorders. Minimally invasive spine surgery attempts to decrease iatrogenic muscle injury, decrease pain, and speed postoperative recovery with the use of smaller incisions and specialized instruments. This article explains in detail minimally invasive approaches to the posterior spine, the techniques for posterior cervical foraminotomy and arthrodesis via lateral mass screw placement, and anterior cervical foraminotomy. Complications are also discussed. Additionally, illustrated cases are presented detailing the use of minimally invasive surgical techniques.     

Poor surgical technique in cervical plating leading to vertebral artery injury and brain stem infarction--case report

BACKGROUND: Lateral mass plating is a safe fixating system for lower cervical fractures. Brain stem infarction after cervical lateral mass screw plating has not been reported in previous literature. We report a case of poor surgical technique leading to vertebral artery injury and brain stem infarction after cervical lateral mass plating. CASE DESCRIPTION: A 41-year-old male patient was transferred to our hospital because of hemiparesis and dysarthria immediately after lateral mass plating for fracture and dislocation of the fifth and sixth cervical vertebrae. Brain magnetic resonance imaging showed infarction of the left posterior inferior cerebellar artery territory, and the vertebral artery angiography showed complete occlusion of the left vertebral artery. The cervical computed tomography revealed a left screw of the fifth and sixth cervical vertebrae penetrating the central portion of the transverse foramen. The patient was managed with anticoagulant and supportive therapy only, with subsequent improvement of hemiparesis and dysarthria. CONCLUSIONS: Poor surgical technique of lateral mass plating in the cervical spine could lead to vertebral artery injury and even brain stem infarction. Postoperative brain infarction in cervical fusion could be a complication of the usually safe lateral mass plating of the cervical spine.     

Minimally invasive approach to the cervical spine: a proposal

BACKGROUND and PURPOSE: During the last 3 years, a minimally invasive video-assisted approach for parathyroidectomy and thyroidectomy has been developed. Because of the good exposure of the cervical spine during these procedures, the authors decided to perform an anatomic-radiologic study in order to evaluate which cervical vertebrae could be reached by this minimally invasive approach. PATIENTS and METHODS: Three consenting patients, two undergoing minimally invasive parathyroidectomy and one a conventional operation for C4-C5 disc herniation, were selected for this study. The procedure was carried out through a single 1.5-cm central skin incision above the sternal notch. After opening of the cervical linea alba, dissection was performed under endoscopic vision, without using any CO2 insufflation or trocar. After exposure of the prevertebral fascia, an operative tube was introduced through the cervical incision in order to maintain the operative space without using conventional retractors. RESULTS: Through this operative tube, it was possible to introduce both a 5-mm (or 3-mm) endoscope and the surgical instruments. In our patients, we inserted a 1-mm metal probe to exactly localize during fluoroscopy the vertebrae reached by the dissection (C2-C7). CONCLUSIONS: This study shows the feasibility of an anterior minimally invasive approach to the cervical spine. Although the exact indications have to be verified, a video-assisted approach could add some advantages to the well-known benefits coming from the anterior approaches to the cervical spine, especially in terms of cosmetic results and postoperative course and recovery.     

寰枢椎脱位后路螺钉固定方法的临床选择

目的 探讨寰枢椎脱位后路钉棒固定术中寰椎螺钉和枢椎螺钉固定方法 的临床选择.方法 对2002 年11 月至2011 年12 月广州军区广州总医院收治的228 例可复性和23 例难复性寰枢椎脱位患者,术前进行置钉可行性和复位可能性评估,针对性地选择寰椎和枢椎的后路螺钉固定方法,进行寰枢椎后路钉棒固定治疗.结果 251 例患者均行钉棒固定并获得满意复位.寰椎螺钉固定采用椎弓根螺钉403 枚、部分经椎弓根螺钉77 枚、侧块螺钉22 枚;枢椎螺钉固定采用椎弓根螺钉437 枚、椎板螺钉56 枚、侧块螺钉9 枚.术中未发生椎动脉、脊髓损伤.237 例患者获得随访,随访时间4～38 个月,平均随访时间13 个月.230 例患者获骨性融合;6例为纤维愈合,动力位片（均随访2 年以上）未见复发脱位;另1 例为假关节未融合并双侧枢椎椎弓根螺钉松动,行后路翻修手术治愈.结论 根据寰枢椎脱位的复位难易程度和个体解剖特点灵活选择寰椎和枢椎不同的后路螺钉固定方法,扩大了寰枢椎后路钉棒固定技术的适用范围,提高了手术安全性和成功率.     

Biomechanical evaluation of posterior screw fixation in cadaveric cervical spines

Sixteen fresh-frozen spines from cadavers (C4-T1) were randomized on the basis of dual energy xray absorptiometry analysis of bone mineral density. The specimens were subjected to physiologic loads (相似文献   

Minimally invasive anterior approach to upper cervical spine: surgical technique

OBJECTIVE: The transoral approach of Spetzler is the classic anterior access to the upper cervical spine that provides direct exposure for anterior decompression of the spinal cord. The risks of infection, the limits in extension, and the postoperative recovery difficulties of transmucosal access suggest the use of an alternative anterior extraoral approach in upper cervical surgery. However, this approach results in complications from nerve palsy because of excessive retraction of the hypoglossal and the superior laryngeal nerves. The goal of this work was to provide anatomic data for an anterior retropharyngeal upper cervical approach through a minimally invasive window below the hypoglossal and the superior laryngeal nerves. METHODS: In two adult cadaveric cervical spines, the anterior approach using the Metrx tubular retractor system through a window between the hypoglossal nerve and the superior laryngeal nerve, as well as below these two nerves, is compared in the exposure of C1 and C2 anteriorly with the aid of an operating microscope. RESULTS: A maximum diameter of the internervous window for the tubular retractor is reached beyond which the superior laryngeal nerve will be excessively stretched. Conversely, the tubular retractor can retract the superior laryngeal nerve superiorly without undue tension. Better proximal exposure is also made possible by angling an end-beveled tubular retractor on the mandible without undue compression on the hypoglossal and superior laryngeal nerves, the marginal mandibular branch of the facial nerve, and the submandibular gland. CONCLUSION: This minimally invasive approach can replace transoral surgery, allowing direct anterior access to C1 and C2 while allowing extension to the lower cervical spine.     

下颈椎全椎板切除后生物力学特性改变机制的有限元分析

目的:探讨下颈椎全椎板切除后生物力学特性改变的机制。方法:采集1例成年健康男性志愿者下颈椎(C3～C7)的CT数据集,应用Mimics 10.01、Geomagic studio 10.0、HyperMesh 10.0、Abaqus 6.9.1等软件建立下颈椎(C3～C7)完整有限元模型、完整保留双侧关节突关节三节段(C4～C6)全椎板切除后有限元模型。模拟施加74N头颅预载荷和1.8Nm运动附加力矩,使模型产生前屈、后伸、侧屈和旋转运动,测试颈椎全椎板切除前后的运动范围和关节囊韧带、后纵韧带在各种加载方式下的拉力。结果:C4～C6全椎板切除后即刻颈椎屈伸、侧弯和旋转的运动范围与完整状态下比较均没有增加,但C4～C6节段之间的关节囊韧带和后纵韧带在各种加载方式下受到的拉力均增大。结论:完整保留双侧关节突关节的全椎板切除术不会对下颈椎即时稳定性造成影响,但关节囊韧带和后纵韧带承受着超正常生理负荷。     

Two-level disc herniation in the cervical and thoracic spine presenting with spastic paresis in the lower extremities without clinical symptoms or signs in the upper extremities.

BACKGROUND CONTEXT: There is no report in the literature of two-level disc herniation in the cervical and thoracic spine presenting with spastic paresis/paralysis exclusively in the bilateral lower extremities. PURPOSE: To identify the clinical characteristics of specific myelopathy resulting from C6-C7 disc herniation through a case with spastic paresis in the lower extremities without upper extremities symptoms due to separate disc herniation in the cervical and thoracic spine, which was surgically removed in two stages. STUDY DESIGN/SETTING: A case report. METHODS: A 48-year-old man developed a gait disturbance as well as weakness and numbness in the lower extremities. Thoracic magnetic resonance imaging (MRI) showed a T11-T12 disc herniation, which was removed under the surgical microscope through a minimally invasive posterior approach. He improved, but 2 months after surgery developed recurrent numbness and spasticity. On this occasion, no evidence of recurrence of the thoracic disc herniation could be identified, but cervical MRI demonstrated a compressed spinal cord at the C6-C7 level. The patient had no neurological findings in the upper extremities. The herniated disc at C6-C7 was removed under the surgical microscope with laminoplasty. RESULTS: The symptoms gradually improved after surgery. At the present time, 2 years and 9 months after the initial operation, the patient had a stable gait and was able to work. CONCLUSIONS: Our experience suggests that in the diagnosis of patients with spastic paresis and sensory disturbances in the lower extremities, spinal cord compression should be explored by imaging studies not only in the thoracic spine but also in the cervical spine, especially at the C6-C7 level, even if the symptoms and abnormal neurological findings are absent in the upper extremities.     

Traumatic posterior atlantooccipital dislocation with Jefferson fracture and fracture-dislocation of C6-C7: a case report with survival

Atlantooccipital dislocation (AOD) is a rare and usually fatal injury. In the current study, the authors reported an extremely rare case of posterior AOD with Jefferson fracture and fracture-dislocation of C6-C7. The patient survived the injury and had only incomplete quadriplegia below the C7 segment with anterior cord syndrome. He was successfully managed with in situ occipitocervical fusion using the Cotrel-Dubousset rod system, corpectomy of C6, and anterior interbody fusion of C5-C7 with plating. To our knowledge, this is the first report of posterior AOD with two other non-contiguous cervical spine injuries. A high index of suspicion and careful examination of the upper cervical spine should be considered as the key to the diagnosis of AOD in cases that involve multiple or lower cervical spine injuries.     

颈椎侧块螺钉技术在下颈椎不稳定中的应用

目的　探讨颈椎侧块螺钉技术在下颈椎不稳中的应用。方法　应用Axis颈椎侧块钢板治疗各种原因引起的下颈椎不稳 89例 ;其中 ,采用Roy Camille技术 4 8例 ,改良Magerl技术 4 1例。结果　 89例患者随访 7～ 74月 ,无神经损伤并发症 ,伴有脊髓损伤的 4 6例术后都有不同程度的功能改善 ,所有的患者均获得了骨性融合。结论　颈椎侧块螺钉技术是一个安全、有效的内固定方式 ,并可提高骨融合率并且几乎没有神经并发症     

The endoscopically assisted simultaneous posteroanterior reconstruction of the thoracolumbar spine in prone position.

BACKGROUND CONTEXT: The reconstruction of the anterior column of the thoracolumbar spine has become more common in the last few years, due largely to the unfavorable results of exclusively posterior surgical treatment, which has been associated with a lack of about 10 degrees of kyphosis correction after removal of the instrumentation. The minimally invasive anterior techniques have reduced the morbidity of the anterior approach significantly. PURPOSE: A minimally invasive technique for anterior stabilization of the spine may reduce the morbidity of the open approach. Irrespective of an anterior open or an endoscopic approach, the posteroanterior instrumentation of thoracolumbar fractures requires time-consuming intraoperative maneuvers to change the patient position from prone to lateral. We describe here a standardized anterior endoscopically assisted approach for the segments T4 to L4. This approach allows the patient to remain in prone position. A 4- to 5-cm incision combined with a retractor system is used. STUDY DESIGN/SETTING: In a prospective study, all patients of our clinic who underwent surgery of the thoracolumbar spine between July 1999 and May 2001 were registered. Study criteria were duration of surgery, duration of anesthesia, intra- and postoperative complications. PATIENT SAMPLE: Between July 1999 and May 2001, 42 patients (25 male, 17 female, average age of 41.9 years), who presented with 55 injured spinal levels and underwent surgery of the thoracolumbar spine in prone position, were included. OUTCOME MEASURES: Duration of surgery (posterior/anterior/total), duration of anesthesia, method of instrumentation, intra- and postoperative complications, postoperative hospital stay and radiographs were evaluated. METHODS: Surgery was performed in prone position. A thoracic approach was used for instrumentation of T9 to L2. A retroperitoneal approach was used for stabilization of L1 to L5. Both procedures were endoscopically assisted with a new retractor system (Synframe; Synthes GmbH, Umkirch, Germany). In this manner, only an incision 4 to 5 cm long and a stab incision for the endoscope were required. The whole procedure was performed in prone position without a change of position during surgery. RESULTS: A total of 42 patients underwent surgery following this technique: 14 isolated anterior procedures (median duration of surgery, 181 minutes); 13 simultaneous one-stage procedures (median duration of surgery: 210 minutes) and 15 combined two-stage procedures (median duration of surgery: 90 minutes posterior, 120 minutes anterior, 240 minutes posterior+anterior). In the simultaneous posteroanterior procedures, the anterior instrumentation was performed 20 times using one rod, twice using two rods and in six patients simply by bone grafting. No intraoperative complications were observed. In the postoperative course, one case of pneumothorax, one case of hemothorax and one case of transient intercostal neuralgia occurred. CONCLUSION: The approach to the anterior spine in prone position is feasible by using a self-holding retractor system for the region between T4 and L4. The duration of anesthesia for the one-stage simultaneous procedure was reduced by about 40 minutes, because changing the position of the patient is no longer necessary. The minimal incision, in combination with the retractor system, significantly reduces cost by allowing the use of less expensive instruments and implants. The advantages of the open and the endoscopic techniques are combined, while their disadvantages are minimized. The main advantage of the prone position is the opportunity to access the anterior and posterior spine simultaneously, which is especially helpful in reduction maneuvers.     

Biomechanical comparison of two-level cervical locking posterior screw/rod and hook/rod techniques.

BACKGROUND CONTEXT: Locking posterior instrumentation in the cervical spine can be attached using 1) pedicle screws, 2) lateral mass screws, or 3) laminar hooks. This order of options is in order of decreasing technical difficulty and decreasing depth of fixation, and is thought to be in order of decreasing stability. PURPOSE: We sought to determine whether substantially different biomechanical stability can be achieved in a two-level construct using pedicle screws, lateral mass screws, or laminar hooks. Secondarily, we sought to quantify the differential and additional stability provided by an anterior plate. STUDY DESIGN: In vitro biomechanical flexibility experiment comparing three different posterior constructs for stabilizing the cervical spine after three-column injury. METHODS: Twenty-one human cadaveric cervical spines were divided into three groups. Group 1 received lateral mass screws at C5 and C6 and pedicle screws at C7; Group 2 received lateral mass screws at C5 and C6 and laminar hooks at C7; Group 3 received pedicle screws at C5, C6, and C7. Specimens were nondestructively tested intact, after a three-column two-level injury, after posterior C5-C7 rod fixation, after two-level discectomy and anterior plating, and after removing posterior fixation. Angular motion was recorded during flexion, extension, lateral bending, and axial rotation. Posterior hardware was subsequently failed by dorsal loading. RESULTS: Laminar hooks performed well in resisting flexion and extension but were less effective in resisting lateral bending and axial rotation, allowing greater range of motion (ROM) than screw constructs and allowing a significantly greater percentage of the two-level ROM to occur across the hook level than the screw level (p<.03). Adding an anterior plate significantly improved stability in all three groups. With combined hardware, Group 3 resisted axial rotation significantly worse than the other groups. Posterior instrumentation resisted lateral bending significantly better than anterior plating in all groups (p<.04) and resisted flexion and axial rotation significantly better than anterior plating in most cases. Standard deviation of the ROM was greater with anterior than with posterior fixation. There was no significant difference among groups in resistance to failure (p=.74). CONCLUSIONS: Individual pedicle screws are known to outperform lateral mass screws in terms of pullout resistance, but they offered no apparent advantage in terms of construct stability or failure of whole constructs. Larger standard deviations in anterior fixation imply more variability in the quality of fixation. In most loading modes, laminar hooks provided similar stability to lateral mass screws or pedicle screws; caudal laminar hooks are therefore an acceptable alternative posteriorly. Posterior two-level fixation is less variable and slightly more stable than anterior fixation. Combined instrumentation is significantly more stable than either anterior or posterior alone.