Biowaiver monographs for immediate-release solid oral dosage forms: stavudine

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing stavudine (d4T) are reviewed. According to Biopharmaceutics Classification System (BCS), d4T can be assigned to BCS class I. No problems with BE of IR d4T formulations containing different excipients and produced by different manufacturing methods have been reported and, hence, the risk of bioinequivalence caused by these factors appears to be low. Furthermore, d4T has a wide therapeutic index. It is concluded that a biowaiver is appropriate for IR solid oral dosage forms containing d4T as the single active pharmaceutical ingredient (API) provided that (a) the test product contains only excipients present in the IR d4T drug products that have been approved in a number of countries for the same dosage form, and (b) both test product and its comparator are either "very rapidly dissolving" or "rapidly dissolving" with similarity of dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8.     

Biowaiver monographs for immediate-release solid oral dosage forms: quinine sulfate

The biowaiver approach permits evaluation of bioequivalence (BE) using a set of laboratory tests, obviating the need for expensive and time-consuming pharmacokinetic BE studies provided that both the active pharmaceutical ingredient and the formulations can meet the specified criteria. In the present monograph, the biowaiver-relevant data including solubility and permeability data, therapeutic use and therapeutic index, pharmacokinetic properties, reported excipient interactions, and BE/bioavailability studies of quinine sulfate are itemized and discussed. Quinine sulfate has borderline solubility characteristics and, on the whole, is highly permeable. Thus, depending on the jurisdiction, it is assigned to Biopharmaceutics Classification System class I or II. Although these characteristics would suggest a low risk of bioinequivalence among oral quinine products, a recent pharmacokinetic study showed bioinequivalence of two products. Even though quinine does not, strictly speaking, fit the definition of a narrow therapeutic index drug, it shows dose-related and, in some cases, irreversible side effects and toxicities at concentrations not far above the therapeutic concentration range. Taking all relevant aspects into consideration, a biowaiver cannot be recommended for new quinine immediate-release multisource products or major post-approval changes of already marketed quinine products, and in such cases, BE should be evaluated using an in vivo BE study.     

Biowaiver monographs for immediate-release solid oral dosage forms: primaquine phosphate

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing the antimalarial drug primaquine phosphate as the only active pharmaceutical ingredient (API) are reviewed. On the basis of permeability data and solubility studies, primaquine phosphate was found to be "highly soluble" and "highly permeable" API, thus conforming to Class I of the Biopharmaceutical Classification System (BCS). It has a wide therapeutic index. BCS-conform dissolution studies showed the products to be rapidly dissolving. No data pertaining to BE or bioinequivalence of IR primaquine phosphate products could be located in open literature. On the basis of the available data, a biowaiver-procedure-based approval can be recommended for IR solid oral dosage forms of primaquine phosphate, provided the generic product contains excipients present in products already approved by the International Conference on Harmonisation or associated countries in similar amounts and the test and reference products meet the dissolution criteria for "rapidly dissolving" (>85% drug release in 30 min in standard media at pH 1.2, 4.5, and 6.8; similarity factor (f(2)) > 50) or "very rapidly dissolving" products (>85% drug release in 15 min in standard media at pH 1.2, 4.5, and 6.8).     

Biowaiver monograph for immediate-release solid oral dosage forms: acetylsalicylic acid

A biowaiver monograph for acetylsalicylic acid (ASA) is presented. Literature and experimental data indicate that ASA is a highly soluble and highly permeable drug, leading to assignment of this active pharmaceutical ingredient (API) to Class I of the Biopharmaceutics Classification System (BCS). Limited bioequivalence (BE) studies reported in the literature indicate that products that have been tested are bioequivalent. Most of the excipients used in products with a marketing authorization in Europe are not considered to have an impact on gastrointestinal motility or permeability. Furthermore, ASA has a wide therapeutic index. Thus, the risks to the patient that might occur if a nonbioequivalent product were to be incorrectly deemed bioequivalent according to the biowaiver procedure appear to be minimal. As a result, the BCS-based biowaiver procedure can be recommended for approval of new formulations of solid oral dosage forms containing ASA as the only API, including both multisource and reformulated products, under the following conditions: (1) excipients are chosen from those used in ASA products already registered in International Conference on Harmonization and associated countries and (2) the dissolution profiles of the test and the comparator products comply with the BE guidance.     

Biowaiver monographs for immediate release solid oral dosage forms: lamivudine

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing lamivudine as the only active pharmaceutical ingredient were reviewed. The solubility and permeability data of lamivudine as well as its therapeutic index, its pharmacokinetic properties, data indicating excipient interactions, and reported BE/bioavailability (BA) studies were taken into consideration. Lamivudine is highly soluble, but its permeability characteristics are not well-defined. Reported BA values in adults ranged from 82% to 88%. Therefore, lamivudine is assigned to the biopharmaceutics classification system (BCS) class III, noting that its permeability characteristics are near the border of BCS class I. Lamivudine is not a narrow therapeutic index drug. Provided that (a) the test product contains only excipients present in lamivudine IR solid oral drug products approved in the International Conference on Harmonization or associated countries in usual amounts and (b) the test product as well as the comparator product fulfills the BCS dissolution criteria for very rapidly dissolving; a biowaiver can be recommended for new lamivudine multisource IR products and major post-approval changes of marketed drug products.     

Biowaiver monographs for immediate release solid oral dosage forms: ibuprofen

Literature data are reviewed on the properties of ibuprofen related to the biopharmaceutics classification system (BCS). Ibuprofen was assessed to be a BCS class II drug. Differences in composition and/or manufacturing procedures were reported to have an effect on the rate, but not the extent of absorption; such differences are likely to be detectable by comparative in vitro dissolution tests. Also in view of its therapeutic use, its wide therapeutic index and uncomplicated pharmacokinetic properties, a biowaiver for immediate release (IR) ibuprofen solid oral drug products is scientifically justified, provided that the test product contains only those excipients reported in this paper in their usual amounts, the dosage form is rapidly dissolving (85% in 30 min or less) in buffer pH 6.8 and the test product also exhibits similar dissolution profiles to the reference product in buffer pH 1.2, 4.5, and 6.8.     

Biowaiver monographs for immediate release solid oral dosage forms: cimetidine

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned to Class III. Cimetidine's therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability (BA) problems were also taken into consideration. On the basis of the overall evidence, a biowaiver can be recommended for cimetidine IR products, provided that the test product contains only those excipients reported in this paper in their usual amounts, and that the test and the comparator drug products both are "rapidly dissolving" as per BCS.     

Biowaiver monographs for immediate release solid oral dosage forms: pyrazinamide

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing pyrazinamide as the only active pharmaceutical ingredient (API) are reviewed. Pyrazinamide is BCS Class III, with linear absorption over a wide dosing range. The risk of bioinequivalence is estimated to be low. Depending on the definition used, pyrazinamide can be classified as a narrow therapeutic index (NTI) drug, which is usually a caveat to biowaiving but may be deemed acceptable if the Summary of Product Characteristics (SmPCs) of the test product stipulates the need for regular monitoring of liver function. It is concluded that a biowaiver can be recommended for IR solid oral dosage only when the test product (a) contains only excipients present in pyrazinamide IR solid oral drug products approved in ICH or associated countries, (b) these excipients are present in amounts normally used in IR solid oral dosage forms, (c) the test product is very rapidly dissolving, (d) the SmPC of the test product indicates the need for monitoring of the patient's liver function.     

Biowaiver monographs for immediate release solid oral dosage forms: prednisolone

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing prednisolone are reviewed. Data on its solubility, oral absorption, and permeability are not totally conclusive, but strongly suggest a BCS Class 1 classification. Prednisolone's therapeutic indications and therapeutic index, pharmacokinetics, and the possibility of excipient interactions were also taken into consideration. Available evidence indicates that a biowaiver for IR solid oral dosage forms formulated with the excipients tabulated in this article would be unlikely to expose patients to undue risks.     

Biowaiver monographs for immediate release solid oral dosage forms: aciclovir

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing (biowaiver) for the approval of immediate release (IR) solid oral dosage forms containing aciclovir are reviewed. Aciclovir therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) studies were also taken into consideration in order to ascertain whether a biowaiver can be recommended. According to the Biopharmaceutics Classification System (BCS) and considering tablet strengths up to 400 mg, aciclovir would be BCS Class III. However, in some countries also 800 mg tablets are available which fall just within BCS Class IV. Aciclovir seems not to be critical with respect to a risk for bioinequivalence, as no examples of bioinequivalence have been identified. It has a wide therapeutic index and is not used for critical indications. Hence, if: (a) the test product contains only excipients present in aciclovir solid oral IR drug products approved in ICH or associated countries, for instance as presented in this article; and (b) the comparator and the test product both are very rapidly dissolving, a biowaiver for IR aciclovir solid oral drug products is considered justified for all tablet strengths.     

Biowaiver monographs for immediate release solid oral dosage forms: levofloxacin

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing levofloxacin as the only active pharmaceutical ingredient (API) are reviewed. According to the current Biopharmaceutics Classification System, levofloxacin can be assigned to Class I. No problems with BE of IR levofloxacin formulations containing different excipients and produced by different manufacturing methods have been reported and hence the risk of bioinequivalence caused by these factors appears to be low. In addition, levofloxacin has a wide therapeutic index. On the basis of this evidence, a biowaiver is recommended for IR solid oral dosage forms containing levofloxacin as the single API provided that (a) the test product contains only excipients present in IR levofloxacin drug products that have been approved in International Conference on Harmonization (ICH) or associated countries and which have the same dosage form; (b) both the test and comparator dosage form are "very rapidly dissolving" or "rapidly dissolving" with similarity of the dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8; and (c) if the test product contains polysorbates, it should be both qualitatively and quantitatively identical to its comparator in terms of polysorbate content.     

Biowaiver monographs for immediate release solid oral dosage forms: metronidazole

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing metronidazole are reviewed. Metronidazole can be assigned to Biopharmaceutics Classification System Class I. Most BE studies that were identified reported the investigated formulations to be bioequivalent, indicating the risk of bioinequivalence to be low. Formulations showing differences in bioavailability showed dissimilarities in in vitro dissolution profiles. Furthermore, metronidazole has a wide therapeutic index. It is concluded that a biowaiver for solid IR formulations is justified, provided: (a) the test product and its comparator are both rapidly dissolving; (b) meet similarity of the dissolution profiles at pH 1.2, 4.5, and 6.8; (c) the test product contains only excipients present in IR drug products approved in International Conference on Harmonisation (ICH) or associated countries in the same dosage form; and (d) if the test product contains sorbitol, sodium laurilsulfate, or propylene glycol, the test product needs to be qualitatively and quantitatively identical to its comparator with respect to these excipients [corrected]..     

Biowaiver monographs for immediate release solid oral dosage forms: isoniazid

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing isoniazid as the only active pharmaceutical ingredient (API) are reviewed. Isoniazid's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Isoniazid is "highly soluble" but data on its oral absorption and permeability are inconclusive, suggesting this API to be on the borderline of BCS Class I and III. For a number of excipients, an interaction with the permeability is extreme unlikely, but lactose and other deoxidizing saccharides can form condensation products with isoniazid, which may be less permeable than the free API. A biowaiver is recommended for IR solid oral drug products containing isoniazid as the sole API, provided that the test product meets the WHO requirements for "very rapidly dissolving" and contains only the excipients commonly used in isoniazid products, as listed in this article. Lactose and/or other deoxidizing saccharides containing formulations should be subjected to an in vivo BE study.     

Biowaiver monographs for immediate release solid oral dosage forms: prednisone

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing prednisone are reviewed. Due to insufficient data prednisone cannot be definitively classified according to the current Biopharmaceutics Classification System (BCS) criteria as both the solubility and the permeability of prednisone are on the borderline of the present criteria of BCS Class I. Prednisone's therapeutic indications and therapeutic index, pharmacokinetics and the possibility of excipient interactions were also taken into consideration. Available evidence indicates that a biowaiver for IR solid oral dosage forms formulated with the excipients tabulated in this article would be unlikely to expose patients to undue risks.     

Biowaiver monographs for immediate release solid oral dosage forms: acetazolamide

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing acetazolamide are reviewed. Acetazolamide's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems are taken into consideration. The available data on solubility, on oral absorption and permeability are not sufficiently conclusive to classify acetazolamide with certainty. Taking a conservative approach, no biowaiver is considered justified for the registration of new multisource drug products. However, SUPAC level 1 and level 2 postapproval changes and most EU Type I variations can be approved waiving in vivo BE studies.     

Biowaiver monographs for immediate release solid oral dosage forms: Doxycycline hyclate

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing doxycycline hyclate are reviewed. According to the Biopharmaceutics Classification System (BCS), doxycycline hyclate can be assigned to BCS Class I. No problems with BE of IR doxycycline formulations containing different excipients and produced by different manufacturing methods have been reported and hence the risk of bioinequivalence caused by these factors appears to be low. Doxycycline has a wide therapeutic index. Further, BCS-based dissolution methods have been shown to be capable of identifying formulations which may dissolve too slowly to generate therapeutic levels. It is concluded that a biowaiver is appropriate for IR solid oral dosage forms containing doxycycline hyclate as the single Active Pharmaceutical Ingredient (API) provided that (a) the test product contains only excipients present in doxycycline hyclate IR solid oral drug products approved in the International Conference on Harmonization (ICH) or associated countries; and (b) the comparator and the test products comply with the BCS criteria for “very rapidly dissolving” or, alternatively, when similarity of the dissolution profiles can be demonstrated and the two products are “rapidly dissolving.”. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 1639–1653, 2010     

Biowaiver monographs for immediate release solid oral dosage forms: metoclopramide hydrochloride

Literature data are reviewed relevant to the decision for a biowaiver of immediate release (IR) solid oral dosage forms containing metoclopramide hydrochloride. In addition, new solubility data, obtained under Biopharmaceutics Classification System (BCS) conditions are presented. Metoclopramide HCl is conservatively assigned to BCS Class III. Taken also into consideration excipient interactions reported in metoclopramide drug products, its pharmacokinetic properties and therapeutic use and therapeutic index, a biowaiver can be recommended when: (a) the test product contains only excipients present also in metoclopramide HCl containing IR solid oral drug products approved in ICH or associated countries, for instance as presented in this paper, (b) in amounts in normal use in IR solid oral dosage forms, and (c) the test product and the comparator both comply with the criteria for very rapidly dissolving.     

Biowaiver monographs for immediate release solid oral dosage forms: amitriptyline hydrochloride

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing amitriptyline hydrochloride are reviewed. Its therapeutic uses, its pharmacokinetic properties, the possibility of excipient interactions and reported BE/bioavailability (BA) problems are also taken into consideration. Literature data indicates that amitriptyline hydrochloride is a highly permeable active pharmaceutical ingredient (API). Data on the solubility according to the current Biopharmaceutics Classification System (BCS) were not fully available and consequently amitriptyline hydrochloride could not be definitively assigned to either BCS Class I or BCS Class II. But all evidence taken together, a biowaiver can currently be recommended provided that IR tablets are formulated with excipients used in existing approved products and that the dissolution meets the criteria defined in the Guidances.     

Biowaiver monographs for immediate release solid oral dosage forms: ranitidine hydrochloride

Literature and experimental data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the approval of immediate release (IR) solid oral dosage forms containing ranitidine hydrochloride are reviewed. According to the current Biopharmaceutics Classification System (BCS), ranitidine hydrochloride should be assigned to Class III. However, based on its therapeutic and therapeutic index, pharmacokinetic properties and data related to the possibility of excipient interactions, a biowaiver can be recommended for IR solid oral dosage forms that are rapidly dissolving and contain only those excipients as reported in this study.