Role of serum vitronectin and fibronectin in adhesion of fibroblasts following seeding onto tissue culture polystyrene.

The suitability of polymeric biomaterials as surfaces for the attachment and growth of cells has often been investigated in tissue culture. In this study the contribution that adsorption of serum fibronectin (Fn) or vitronectin (Vn) make to the attachment and spreading of fibroblast cells during the first 90 min following seeding was determined for two modified tissue culture polystyrenes, as model biomaterial surfaces. The amount of serum Vn and Fn which adsorbed onto tissue culture grade polystyrene (TCP) from different serum concentrations over the range of 0.1-30% (v/v) were determined and compared to attachment of cells of the BHK-21 and HT1080 fibroblast lines. There was no simple correlation between the amount of Fn or the amount of Vn adsorbed and cell attachment and spreading. The requirement for Fn or Vn for attachment and spreading of BHK-21 or HT1080 cells onto modified polystyrene (either TCP or to Primaria) during the first 90 min of cell culture was directly tested by selective removal of Fn or Vn from the serum prior to addition to the culture medium. Attachment and spreading of BHK-21 or HT1080 cells onto TCP or Primaria surfaces were reduced in a concentration-dependent manner when the cells were seeded in medium containing 2% (v/v) or higher concentrations of Vn-depleted serum. BHK-21 cells or HT1080 cells seeded in medium containing Fn-depleted serum (which contained Vn) attached and spread onto TCP or Primaria. Both BHK-21 cells and HT1080 cells failed to attach to TCP or Primaria when seeded in medium containing serum depleted of both Vn and Fn. The requirement for serum Vn or Fn for fibroblast attachment to TCP was also tested using cells of a human dermal fibroblast strain. The attachment of the dermal fibroblasts to TCP during the first 90 min of culture was not decreased by depletion of Vn from the 15% (v/v) serum, but there was a reduction in the proportion of the attached cells which had spread. Selective depletion of serum Fn did not have any effect on either cell attachment or spreading. Our results show that for fibroblast cells, particularly with cell lines such as BHK-21 or HT1080 but also with cell strains, the first binding of cells onto tissue culture polystyrene when plated in medium containing serum is a result of adsorption onto the surface of serum Vn. The adsorption of serum Vn onto the surface overcomes the effect of serum components which tend to decrease cell attachment.     

The influence of protein adsorption on interactions of cultured human endothelial cells with polymers

A systematic study of the effects of polymer surface properties on the interaction with human endothelial cells (HEC) may lead to the development of small-diameter vascular grafts. HEC, suspended in culture medium containing 20% serum adhered and spread onto moderately wettable polymers such as TCPS (tissue culture polystyrene). Reduced or no adhesion of HEC was observed upon the hydrophobic polymers PETP (polyethyleneterephthalate, Dacron) and FEP (fluoroethylenepropylene copolymer, Teflon). Polymers precoated with the proteins albumin (Alb), high density lipoprotein (HDL), and immunoglobulin G (IgG) inhibited the adhesion of HEC, whereas fibronectin (Fn) coatings promoted cell adhesion. Endothelialization of PETP and FEP only occurred after precoating of these materials with Fn. The adsorption of Fn, Alb, HDL, and IgG from solutions of different serum concentrations onto TCPS, PETP, and FEP was related to the adhesion of HEC. Serum Fn only adsorbed onto TCPS, with the maximum at 0.1% serum concentration. Maximal cell adhesion onto TCPS was also observed after pretreatment with a solution containing 0.1% serum. The cell adhesion inhibiting proteins Alb and HDL preferentially adsorbed at higher serum concentrations. Desorption of these proteins and exchange for, e.g., cellular Fn may result in cell spreading and proliferation of HEC upon TCPS.     

Assessment of fibronectin conformation adsorbed to polytetrafluoroethylene surfaces from serum protein mixtures and correlation to support of cell attachment in culture

Surfaces of polytetrafluoroethylene (PTFE) were exposed to buffered aqueous solutions containing radio-labeled human fibronectin ([¹²⁵I]Fn), Fn/bovine serum albumin (BSA) binary mixtures of various ratios or whole human plasma dilutions for 1 h. Total adsorbed Fn and albumin adsorption following rinsing was quantified on this surface. ¹²⁵I-labeled monoclonal antibodies against either the tenth type-III Fn repeat unit (containing the cell-binding RGDS integrin recognition motif) or the Fn amino-terminal domain were used to probe the accessibility of each of these respective Fn regions post-adsorption. Human umbilical vein endothelial cells (HUVECs) were cultured on PTFE surfaces pre-exposed to each of these protein adsorption conditions and compared to identical conditions on tissue culture polystyrene (TCPS). Fn adsorption to PTFE is dependent upon the concentration of albumin co-adsorbing from solution: albumin out-competes Fn for PTFE surface sites even at non-physiological Fn/HSA ratios 10–100-fold biased in Fn. Antibodies against Fn do not readily recognize Fn adsorbed on PTFE as the HSA co-adsorption concentration in either binary mixtures or in plasma increases, indicating albumin masking of adsorbed Fn. At Fn/HSA ratios rich in Fn (1 : 1, 1 :100), albumin co-adsorption actually improves anti-Fn antibody recognition of adsorbed Fn. HUVEC attachment efficiency to PTFE after protein adsorption correlates with amounts of Fn adsorbed and levels of anti-Fn antibody recognition of Fn on PTFE, linking cell attachment to integrin recognition of both adsorbed Fn density and Fn adsorbed conformation on PTFE surfaces.     

Correlating fibronectin adsorption with endothelial cell adhesion and signaling on polymer substrates

Fibronectin (Fn) adsorption was studied on different commercial polymer surface chemistries, including tissue culture polystyrene (TCPS), bacteriologic polystyrene (BPS), fluoropolymer Teflon AF, and poly-L-lactide (PLLA). Antibody probes detected the availability of Fn's cell binding domain on adsorbed Fn in the competitive presence and absence of bovine serum albumin (BSA). Domain availability was highest for Fn adsorbed on TCPS, especially in the presence of either serum albumin or dilute serum. Attachment and growth efficiencies for human umbilical venous endothelial cells (HUVECs) cultured on surfaces preadsorbed with Fn in serum and serum-free media correlated with antibody cell-binding domain availability: TCPS > BPS, Teflon AF > PLLA. Intracellular signaling from the GTPase, RhoA, was highest (RhoA:RhoGDI inhibitor ratio) in cells cultured on the Teflon AF surfaces, indicating that despite lower attached cell numbers on Teflon AF compared to TCPS, cell signaling remained activated after 24 h of growth. Up-regulated cellular Fn mRNA messages, assessed using RT-PCR techniques, supported HUVECs' producing the endogenous extracellular matrix (ECM) protein Fn in order to attach and survive on the suboptimal Teflon AF culture surfaces.     

Assessment of fibronectin conformation adsorbed to polytetrafluoroethylene surfaces from serum protein mixtures and correlation to support of cell attachment in culture

Surfaces of polytetrafluoroethylene (PTFE) were exposed to buffered aqueous solutions containing radio-labeled human fibronectin ([125I]Fn), Fn/bovine serum albumin (BSA) binary mixtures of various ratios or whole human plasma dilutions for 1 h. Total adsorbed Fn and albumin adsorption following rinsing was quantified on this surface. 125I-labeled monoclonal antibodies against either the tenth type-III Fn repeat unit (containing the cell-binding RGDS integrin recognition motif) or the Fn amino-terminal domain were used to probe the accessibility of each of these respective Fn regions post-adsorption. Human umbilical vein endothelial cells (HUVECs) were cultured on PTFE surfaces pre-exposed to each of these protein adsorption conditions and compared to identical conditions on tissue culture polystyrene (TCPS). Fn adsorption to PTFE is dependent upon the concentration of albumin co-adsorbing from solution: albumin out-competes Fn for PTFE surface sites even at non-physiological Fn/HSA ratios 10-100-fold biased in Fn. Antibodies against Fn do not readily recognize Fn adsorbed on PTFE as the HSA co-adsorption concentration in either binary mixtures or in plasma increases, indicating albumin masking of adsorbed Fn. At Fn/HSA ratios rich in Fn (1:1, 1:100), albumin co-adsorption actually improves anti-Fn antibody recognition of adsorbed Fn. HUVEC attachment efficiency to PTFE after protein adsorption correlates with amounts of Fn adsorbed and levels of anti-Fn antibody recognition of Fn on PTFE, linking cell attachment to integrin recognition of both adsorbed Fn density and Fn adsorbed conformation on PTFE surfaces.     

Attachment, spreading and short-term proliferation of human osteoblastic cells cultured on chitosan films with different degrees of acetylation

Chitosan (Ch) is being actively investigated as a non-protein template for the growth of an increasing number of anchorage-dependent cells, including chondrocytes and bone cells. In the present work, Ch films with degrees of N-acetylation (DAs) in the range of 4 to 49% were evaluated with respect to the attachment, spreading and short-term proliferation of osteoblasts, using human osteoblastic MG-63 cells. The films were characterized in terms of surface morphology and surface charge by atomic force microscopy and streaming potential measurements, respectively. Cell attachment was assessed after 3 and 24 h of cell culture. After 24 h of incubation, cell attachment was found to be dependent on the DA, lower DAs favouring cell adhesion. With time, cell spreading and cytoskeleton organization were only attained for DAs 相似文献   

液晶/聚氨酯复合基底影响rBMSCs成骨分化的研究

目的:模拟体内组织弹性微环境,构建液晶(OPC/PU)复合基底,探究复合基底弹性模量及液晶相区尺寸对大鼠骨髓间充值干细胞(rBMSCs)成骨分化的影响。方法:通过调节复合膜中液晶含量,制备不同弹性模量的液晶复合基底。采用偏光显微镜观察复合基底表面液晶相区结构;万能测试仪测量复合基底弹性模量;激光共聚焦显微镜观察rBMSCs的铺展、极化和骨架排列;CCK-8法检测rBMSCs的增殖速率;real-time PCR检测复合膜上的成骨分化标记物Ⅰ型胶原和骨桥蛋白的mRNA表达。结果:(1)复合基底中液晶含量增加,液晶相区数量及尺寸增加,复合基底的弹性模量降低,但仍保持在MPa数量级。(2)rBMSCs在液晶含量较低的OPC10-PU和OPC30-PU表面呈现较好的初始黏附、铺展和增殖。(3)成骨诱导初期及中期,rBMSCs在OPC10-PU上展示较高的Ⅰ型胶原和骨桥蛋白基因表达;诱导培养后期,rBMSCs在OPC30-PU和OPC50-PU上呈现出Ⅰ型胶原和骨桥蛋白基因的高表达,成骨分化的基因表达重点也从早中期的Ⅰ型胶原主要表达转变为后期的骨桥蛋白主要表达。结论:复合基底中液晶含量较低时,rBMSCs主要响应于基底弹性诱发的力学刺激产生细胞行为的变化;基底中液晶含量增加,rBMSCs能够感知到液晶的黏弹特性并与其发生强烈的相互作用,此时基底的弹性和液晶相区的黏弹特性可能均对rBMSCs的成骨分化产生重要影响。     

羌活鱼含药血清对大鼠骨髓间充质干细胞增殖及成骨分化的影响

背景：羌活鱼具有促进骨折愈合的作用,但其具体的作用机制和其有效成分的研究目前尚不清楚。 目的：观察不同浓度羌活鱼含药血清对体外培养大鼠骨髓间充质干细胞成骨分化的影响。 方法：以羌活鱼研粉剂灌服大鼠制得羌活鱼含药血清,灌服等体积生理盐水制得对照血清;采用贴壁筛选法培养大鼠骨髓间充质干细胞,并以不同浓度(2.5%,5%,7.5%,10%)羌活鱼含药血清干预第3代大鼠骨髓间充质干细胞,通过MTT法检测细胞增殖情况;分别测定细胞碱性磷酸酶活性、钙盐沉积量、骨钙素、Ι型胶原表达量以及钙化结节数。 结果与结论：5%和7.5%浓度含药血清可促进细胞增殖、成骨性分化,尤以5%含药血清最为明显,其碱性磷酸酶活性、钙盐沉积量、Ι型胶原含量、骨钙素含量和钙化结节数均显著高于空白对照组(P < 0.01)。羌活鱼经口服后的代谢产物可刺激大鼠骨髓间充质干细胞增殖,并能促进其成骨性分化,推测其可能是羌活鱼续断接骨的作用机制之一。     

Adhesion and growth of cultured human endothelial cells on perfluorosulphonate: role of vitronectin and fibronectin in cell attachment.

The suitability of neutralized perfluorosulphonic acid (Nafion) as a surface for the attachment and growth of human cells was investigated in tissue culture. Nafion was equivalent to tissue culture polystyrene (TCP), and markedly better than polytetrafluoroethylene (Teflon), for the attachment and growth of human umbilical artery endothelial (HUAE) cells. The attachment and growth of HUAE cells on Fn-coated Nafion was equivalent to that on Fn-coated TCP. The contribution to the attachment and spreading of HUAE cells that is due to adsorption of serum fibronectin (Fn) or vitronectin (Vn) on to the Nafion or TCP was directly tested by selective removal of Fn or Vn from the serum before addition to the culture medium. HUAE cells seeded on to Nafion or TCP in medium depleted of Vn failed to attach and spread on to these surfaces, as measured after 4 or 24 h of culture. HUAE cells seeded in medium depleted of Fn, but containing Vn, attached and spread on to Nafion, albeit to a decreased extent as compared to that in intact serum when measured after 4 h of culture, and there was no effect of depletion of Fn when measured after 24 h of culture. HUAE cells seeded on to TCP in medium depleted of Fn became attached and spread during 4 h of culture. Our results show that Nafion is a suitable polymeric surface for the attachment and growth of human cells, including endothelial cells. For HUAE cells, adsorption on to the surface of an adhesive glycoprotein, such as Vn or Fn, is an essential step for attachment and spreading of the cells onto the Nafion surface.     

Attachment,spreading and short-term proliferation of human osteoblastic cells cultured on chitosan films with different degrees of acetylation

Chitosan (Ch) is being actively investigated as a non-protein template for the growth of an increasing number of anchorage-dependent cells, including chondrocytes and bone cells. In the present work, Ch films with degrees of N-acetylation (DAs) in the range of 4 to 49% were evaluated with respect to the attachment, spreading and short-term proliferation of osteoblasts, using human osteoblastic MG-63 cells. The films were characterized in terms of surface morphology and surface charge by atomic force microscopy and streaming potential measurements, respectively. Cell attachment was assessed after 3 and 24 h of cell culture. After 24 h of incubation, cell attachment was found to be dependent on the DA, lower DAs favouring cell adhesion. With time, cell spreading and cytoskeleton organization were only attained for DAs ≤ 13%. Regarding cell proliferation, cells grown on films with the lowest DA (4%) revealed a higher specific growth rate as compared to those grown on films with higher DAs. Films with a DA of 49% failed to sustain cell proliferation. In addition, a longer lag-phase was observed on Ch, as compared to TCPS, in accordance to an observed delay of cell spreading. The present findings revealed that differences in the DA as small as 9% may be critical in terms of the osteoblast response to two-dimensional Ch-based matrices.     

Fibronectin-mediated endothelialisation of chitosan porous matrices

Chitosan (Ch) porous matrices were investigated regarding their ability to be colonized by human microvascular endothelial cells (HPMEC-ST1.6R cell line) and macrovascular endothelial cells namely HUVECs. Specifically we assessed if previous incubation of Ch in a fibronectin (FN) solution was effective in promoting endothelial cell (EC) adhesion to Ch matrices with different degrees of acetylation (DAs). Upon FN physiadsorption, marked differences were found between the two DAs investigated, namely DA 4% and 15%. While cell adhesion was impaired on Ch with DA 15%, ECs were able to not only adhere to Ch with DA 4%, but also to spread and colonize the scaffolds, with retention of the EC phenotype and angiogenic potential. To explain the observed differences between the two DAs, protein adsorption studies using ¹²⁵I-FN and immunofluorescent labelling of FN cell-binding domains were carried out. In agreement with the higher cell numbers found, scaffolds with DA 4% revealed a higher number of exposed FN cell-binding domains as well as greater ability to adsorb FN and to retain and exchange adsorbed FN in the presence of competitive proteins. These findings suggest that the DA is a key parameter modulating EC adhesion to FN-coated Ch by influencing the adsorbed protein layer.     

Extracellular matrix protein adsorption to phosphate-functionalized gels from serum promotes osteogenic differentiation of human mesenchymal stem cells

One of the primary goals for tissue engineering is to induce new tissue formation by stimulating specific cell function. Human mesenchymal stem cells (hMSCs) are a particularly important cell type that has been widely studied for differentiation down the osteogenic (bone) lineage, and we recently found that simple phosphate functional groups incorporated into poly(ethylene glycol) (PEG) hydrogels could induce osteogenesis without using differentiation medium by unknown mechanisms. Here, we aimed to determine whether direct or indirect cell/materials interactions were responsible for directing hMSCs down the osteogenic lineage on phosphate (PO₄)-functionalized PEG hydrogels. Our results indicated that serum components adsorbed onto PO₄-PEG hydrogels from medium in a presoaking step were sufficient for attachment and spreading of hMSCs, even when seeded in serum-free conditions. Blocking antibodies for collagen and fibronectin (targeted to the hydrogel), as well as β1 and β3 integrin blocking antibodies (targeted to the cells), each reduced attachment of hMSCs to PO₄-PEG hydrogels, suggesting that integrin-mediated interactions between cells and adsorbed matrix components facilitate attachment and spreading. Outside-in signaling, and not merely shape change, was found to be required for osteogenesis, as alkaline phosphatase activity and expression of CBFA1, osteopontin and collagen-1 were each significantly down regulated upon inhibition of focal adhesion kinase phosphorylation even though the focal adhesion structure or cell shape was unchanged. Our results demonstrate that complex function (i.e. osteogenic differentiation) can be controlled using simple functionalization strategies, such as incorporation of PO₄, but that the role of these materials may be due to more complex influences than has previously been appreciated.     

Magnesium modification of a calcium phosphate cement alters bone marrow stromal cell behavior via an integrin-mediated mechanism

The chemical composition, structure and surface characteristics of biomaterials/scaffold can affect the adsorption of proteins, and this in turn influences the subsequent cellular response and tissue regeneration. With magnesium/calcium phosphate cements (MCPC) as model, the effects of magnesium (Mg) on the initial adhesion and osteogenic differentiation of bone marrow stromal cells (BMSCs) as well as the underlying mechanism were investigated. A series of MCPCs with different magnesium phosphate cement (MPC) content (0∼20%) in calcium phosphate cement (CPC) were synthesized. MCPCs with moderate proportion of MPC (5% and 10%, referred to as 5MCPC and 10MCPC) were found to effectively modulate the orientation of the adsorbed fibronectin (Fn) to exhibit enhanced receptor binding affinity, and to up-regulate integrin α5β1 expression of BMSCs, especially for 5MCPC. As a result, the attachment, morphology, focal adhesion formation, actin filaments assembly and osteogenic differentiation of BMSCs on 5MCPC were strongly enhanced. Further in vivo experiments confirmed that 5MCPC induced promoted osteogenesis in comparison to ot her CPC/MCPCs. Our results also suggested that the Mg on the underlying substrates but not the dissolved Mg ions was the main contributor to the above positive effects. Based on these results, it can be inferred that the specific interaction of Fn and integrin α5β1 had predominant effect on the MCPC-induced enhanced cellular response of BMSCs. These results provide a new strategy to regulate BMSCs adhesion and osteogenic differentiation by adjusting the Mg/Ca content and distribution in CPC, guiding the development of osteoinductive scaffolds for bone tissue regeneration.     

The effects of surface chemistry and adsorbed proteins on monocyte/macrophage adhesion to chemically modified polystyrene surfaces

Monocytes and macrophages play critical roles in inflammatory responses to implanted biomaterials. Monocyte adhesion may lead to macrophage activation and the foreign body response. We report that surface chemistry, preadsorbed proteins, and adhesion time all play important roles during monocyte adhesion in vitro. The surface chemistry of tissue culture polystyrene (TCPS), polystyrene, Primaria, and ultra low attachment (ULA) used for adhesion studies was characterized by electron spectroscopy for chemical analysis. Fibrinogen adsorption measured by (125)I-labeled fibrinogen was the lowest on ULA, higher on TCPS, and the highest on polystyrene or Primaria. Monocyte adhesion on protein preadsorbed surfaces for 2 h or 1 day was measured with a lactate-dehydrogenase method. Monocyte adhesion decreased over time. The ability of preadsorbed proteins to modulate monocyte adhesion was surface dependent. Adhesion was the lowest on ULA, higher and similar on TCPS or polystyrene, and the highest on Primaria. Monocyte adhesion on plasma or fibrinogen adsorbed surfaces correlated positively and linearly to the amount of adsorbed fibrinogen. Preadsorbed fibronectin, immunoglobulin G, plasma, or serum also promoted adhesion compared with albumin preadsorbed or uncoated surfaces. Overall, biomaterial surface chemistry, the type and amount of adsorbed proteins, and adhesion time all affected monocyte adhesion in vitro.     

Influence of hydroxyapatite microstructure on human bone cell response

Microstructure of calcium phosphate ceramics has been shown to influence long-term in vitro cellular events like proliferation and differentiation, and to favor bone integration in vivo. As long-term cellular events are known to be dependent of early cell adhesion events, we decided to study the in vitro influence of the microstructure of a microporous hydroxyapatite (mHA) and a nonmicroporous hydroxyapatite (pHA) ceramic on serum protein adsorption and SaOs-2 human bone cells attachment after 30 min, 1, 4, and 24 h and cell growth after 96 h. Plastic coverslips were used as controls. Hydroxyapatite composition of mHA and pHA was confirmed by X-ray diffraction and Fourier transform infra-red spectroscopy. The surface energies of ceramics were calculated from contact-angle measurements in di-iodomethane, water or complete culture medium. The total surface energy was 44.8 mJ/m(2) for pHA and 48.7 mJ/m(2) for plastic. The contact-angle measurement was impossible on mHA likely because they displayed 12% of open microporosity, pHA ceramic exhibiting only closed pores (2.5%). Moreover, the roughness amplitude was largely higher on mHA (Sa = 4.35 microm) than on pHA (Sa = 0.065 microm) and plastic (Sa = 0.042 microm). Three different techniques were used to evaluate protein adsorption on the ceramics. SDS-PAGE of desorbed proteins demonstrated that more proteins desorbed from mHA (66.02 microg/m(2)) than from pHA (17.2 microg/m(2)) or plastic (0.08 microg/m(2)). A new method was used to evaluate in situ the quantity of adsorbed total proteins: the temperature-programmed desorption (TPD) analysis coupled with mass spectrometry. The TPD analysis confirmed that 10-fold more proteins adsorbed on mHA compared with those on pHA. A direct immunolabeling on ceramics revealed than more fibronectin and serum albumin adsorbed on microporous ceramic than on dense ceramic. The morphology of SaOs-2 cells was the same on all the substrates after 30 min. At later time points, cell morphology on mHA was radically different than on other surfaces, with the particularity of the cytoplasmic edge that appeared undistinguishable from the surface. Only the extremity of the cells and lamellipodia were visible. Cells seemed like "adsorbed" by the mHA surface, whereas on plastic and pHA surfaces the cells displayed classical aspects of polygonal spreading. The cells displayed on mHA the highest initial attachment potential after 30 min, 1, 4, 24 h but the lower proliferation potential after four days. This study confirms that a microporous ceramic surface can modulate the adsorption of proteins and further the adhesion and proliferation of human bone cells.     

Regulation of mesenchymal stem cell attachment and spreading on hydroxyapatite by RGD peptides and adsorbed serum proteins

The successful development of biomaterials must take into consideration how those surfaces will interact with in vivo processes such as adsorption of endogenous proteins. In this study, we examined whether modifying highly adsorbent materials like hydroxyapatite (HA) with RGD peptides would improve mesenchymal stem cell (MSC) adhesion. We found that RGD, alone, was not sufficient to promote full cell spreading. However, given that RGD-modified HA will likely adsorb osteogenic serum proteins in vivo, we evaluated MSC behavior on HA pre-coated with RGD, then over-coated with serum (RGD/FBS). Interestingly, RGD/FBS coatings additively stimulated MSC attachment and spreading compared to either coating alone, but only at low RGD coating concentrations. High RGD concentrations inhibited cell attachment, and completely eliminated cell spreading on RGD/FBS surfaces. To better understand the mechanism by which RGD and adsorbed serum proteins interactively regulate cell behavior, we monitored the deposition of fibronectin (FN) from serum onto HA pre-coated with increasing RGD concentrations. These studies showed that high RGD concentrations did not inhibit FN adsorption, therefore cell spreading is attenuated by mechanisms other than lack of FN availability. Collectively, our results suggest a potential therapeutic benefit for functionalizing HA with RGD, however such a benefit will likely depend upon the RGD density.     

Membrane thickness is an important variable in membrane scaffolds: Influence of chitosan membrane structure on the behavior of cells

Cell and tissue responses to polymeric materials are orchestrated in part by the conformations of adsorbed plasma proteins. Thus, the chemical properties of a polymer membrane that govern protein adsorption behavior can play an important role in determining the biological properties of tissue engineered scaffolds derived from that polymer. In this study, we explored the role of membrane thickness as a factor influencing cell adhesion and proliferation on chitosan membranes with and without covalently attached glycosaminoglycans. Rat mesenchymal stem cells (MSCs) cultured on chitosan membranes of various thicknesses demonstrated significantly improved cell adhesion, spreading and proliferation as membrane thickness was increased. Rat hepatocytes displayed increased spreading on the substrate with increasing membrane thickness, similar to MSCs. Increased thickness reduced the overall crystallinity of the membrane, and the data indicate that the improved cellular responses were likely due to enhanced adsorption of serum vitronectin, presumably due to reduced membrane crystallinity. These results demonstrate that membrane thickness is an important design variable that can be manipulated in chitosan-based scaffolds to achieve enhanced cell spreading, proliferation and function.     

Co-adsorbed fibrinogen and von Willebrand factor augment platelet procoagulant activity and spreading

Previously we observed that platelets adherent to surfaces preadsorbed with blood plasma exhibited 1.3 to 2.4 times greater procoagulant activity than platelets on surfaces adsorbed with fibrinogen (Fg) only. These observations suggested that the adhesion proteins adsorbed from plasma may activate platelets in a cooperative, or synergistic manner. In the present study, polystyrene surfaces adsorbed with both Fg and vWF induced up to three times greater procoagulant activity than surfaces adsorbed with Fg or vWF only. The amounts of Fg and vWF adsorbed from binary mixtures that resulted in increased procoagulant activity were found to be similar to the amounts that adsorbed to PS from 100% plasma. The effect of adsorbed adhesion proteins on platelet spreading was also investigated. The proportion of fully spread platelets increased, depending on the adhesion protein preadsorbed to the surface, in the following order: vWF < Fg < Fn < (vWF + Fg) < Vn < plasma.     

Release of adsorbed fibronectin from temperature-responsive culture surfaces requires cellular activity

We have previously developed a temperature-responsive cell culture surface by grafting poly(N-isopropylacrylamide) that changes its surface hydrophobicity in response to temperature. While this surface shows similar hydrophobicity to that of commercial polystyrene cell culture surfaces and facilitates cell adhesion and proliferation at 37 degrees C, grafted polymer becomes hydrophilic below 32 degrees C and releases spread cultured cells without trypsin. Temperature-regulated cell detachment requires cell metabolic activity requiring ATP consumption, signal transduction, and cytoskeleton reorganziation. Precoating these surfaces with fibronectin (FN) improves spreading of less adhesive cultured hepatocytes and reducing culture temperature releases cultured cells from FN-adsorbed grafted surfaces. Immunostaining with anti-FN antibody revealed that only FN located beneath cultured cells is removed from culture surfaces after reducing temperature. FN adsorbed to surface areas lacking direct cell attachment remained surface-bound after reducing temperature. A novel concept of active cell detachment is also discussed.     

富血小板血浆凝胶对家兔骨髓间充质干细胞增殖与成骨活性的影响

背景：富血小板血浆含有多种骨组织修复有关的生长刺激因子,并且在凝聚后可以形成纤维蛋白网络支架利于细胞的黏附而促进骨组织再生。 目的：体外评价家兔骨髓间充质干细胞在富血小板血浆凝胶中的增殖与成骨活性。 方法：分离培养5 d龄新生大耳白兔骨髓间充质干细胞;提取成年大耳白兔外周静脉血的富血小板血浆。设置富血小板血浆复合骨髓间充质干细胞(复合细胞组)、复合α-MEM培养液组及单纯骨髓间充质干细胞组进行观察。 结果与结论：各组间的乳酸脱氢酶活性比较差异有显著性意义(P < 0.05),复合细胞组骨髓间充质干细胞增殖明显优于其他组,其凝胶完整、均匀、半透明,细胞不规则多角形散在分布,有较多长突触伸展在凝胶中,在凝胶中散在分布黄绿色荧光亮点和结节,显示有钙化结节形成。数量和大小第3周比第2周稍有增多和增大,而与α-MEM培养液复合未见荧光显色。说明在富血小板血浆凝胶复合骨髓间充质干细胞后,明显促进了骨髓间充质干细胞的增殖与成骨活性。