双颌手术升支截骨后退术后下颌稳定性及与关节关系的研究

目的　探讨升支矢状劈开截骨术(BSSRO)小钛板坚固内固定与口内入路升支垂直截骨术(BIVRO)下颌后退术后颌稳定性的不同规律,了解导致复发的有关因素特别是髁状突移位在不同手术后复发过程中的意义。方法　升支截骨手术后退下颌的患者共38例,皆为双颌手术,其中下颌BSSRO19例,BIVRO后退术19例。于手术前1周(T1),手术后1周(T2),3个月(T3)及1年(T4)分别拍摄定位头颅侧位片及定位颞下颌关节薛氏位片用于测量下颌移动幅度及关节髁状突的手术后移位。结果　双颌手术下颌升支截骨后退术后,BSSRO坚固内固定组1年时的复发率为25%,而BIVRO组大部分患者1年时下颌发生了与手术目的相同的移动,两组的不稳定主要发生在术后3个月内。结论　手术使髁状突移位术后位置的调整可导致BIVRO术后的下颌继续后移而不稳定,而髁状突近心骨段术中向后旋转术后位置的调整可导致BSSRO术后的下颌骨继续向前而不稳定     

Mandibular setback by sagittal split ramus osteotomy: a 12-year follow-up

Short- and long-term skeletal changes after mandibular setback were analyzed using bilateral sagittal split ramus osteotomy. Twelve patients who had undergone mandibular setback surgery between 1986 and 1990 were available for long-term cephalography on average 12 years after primary surgery. The mean amount of surgical setback had been 6.4 mm. After the first postoperative year, there was skeletal relapse of 1 mm at the B-point and pogonion (Pg), amounting to 14% of the initial skeletal setback. In contrast to condylar displacement and proximal segment rotation, osteotomy slippage was associated with positional changes at the B-point and Pg. From 1 to 12 years postoperatively, the B-point and Pg remained stable. Mandibular ramus and corpus length decreased 2.1 mm and 1.3 mm, respectively, indicating remodeling at the osteotomy sites and probably condylar resorption.     

Three-dimensional computed tomographic evaluation of morphologic airway changes after mandibular setback osteotomy for prognathism

OBJECTIVE: To observe changes in the pharyngeal airway and the hyoid bone position after mandibular setback osteotomy in 30 patients with mandibular prognathism by means of 3-dimensional computed tomography (3DCT). STUDY DESIGN: Preoperative and postoperative computed tomography (CT) examinations were performed on 17 patients treated by sagittal split ramus osteotomy with rigid osteosynthesis and on 13 patients treated by intraoral vertical ramus osteotomy without osteosynthesis. The amount of mandibular setback was measured by the preoperative to postoperative difference of the mandibular position in axial CT images. The sizes of the preoperative and postoperative pharyngeal airway were evaluated from semitransparent and crosscut 3DCT images. Postoperative displacement of the hyoid bone was evaluated by a technique to superimpose a postoperative hard tissue 3DCT image on the preoperative image. The helical scan technique was used in the CT examination. The volume rendering technique was used to create 3DCT images. RESULTS: The mean mandibular setback was 7.8 +/- 2.1 mm with a range of 5 to 11 mm. Three months after surgery, the lateral and frontal widths of the pharyngeal airway had decreased significantly in comparison with the preoperative width. The mean reduction rates of the lateral and frontal width were 23.6% and 11.4%, respectively. The diminished airway did not recover by either 6 months or 1 year after surgery in most cases. Downward and posterior displacement of the hyoid bone was seen postoperatively. There were positive correlations between the amount of mandibular setback and reduction of the lateral width of the pharyngeal airway (r = 0.54) and the amount of hyoid bone displacement (r = 0.42). There were no significant differences between the two surgical techniques. CONCLUSION: Three-dimensional computed tomography was a practical imaging technique to evaluate the morphologic airway changes. The pharyngeal airway may have irreversible narrowing after mandibular setback surgery.     

Changes in the position of the condyle after bilateral sagittal split ramus osteotomy in patients with mandibular retrusion and protrusion: a new condyle: fossa matching concept

The purpose of this study was to compare the condylar positional changes after bilateral sagittal split ramus osteotomy (BSSRO) in patients with mandibular retrusion and those with mandibular prognathism. We also studied the correlation between the degree of matching of the condyle and fossa, and condylar displacement. Thirty patients with mandibular retrusion (n = 11) or mandibular prognathism (n = 19) who underwent BSSRO were included. The condylar position was assessed from spiral computed tomographic (CT) scans taken preoperatively, during the first postoperative week, and at least 6 months postoperatively. All data were measured by MIMICS 17.0 and analyzed by Student’s t test and Pearson’s correlation analysis. The size of the condyles of patients with mandibular retrusion was significantly less than those of patients with mandibular prognathism (491.5 (172.8) compared with 823.2 (212.0) mm³). The size of the glenoid fossa in those with mandibular retrusion (599.6 (110.4) mm³) and those with prognathism (597.6 (151.6) mm³) did not seem to differ. Postoperatively the condyles moved outwards, backwards, and downwards in both groups of patients. Correlation analysis between the condyle:fossa volume ratio and the condylar positional changes showed that a large condyle:fossa volume ratio correlated with the smaller positional changes in the condyle. The condylar position changed immediately after mandibular advancement and setback, and persisted in the long term. Larger condyles tended to have fewer positional changes.     

Three-dimensional computed tomography evaluation of postsurgical condylar displacement after mandibular osteotomy

Objective. The purpose of this study was to examine both condylar displacement of the temporomandibular joint after sagittal split ramus osteotomy with rigid osteosynthesis and intraoral vertical ramus osteotomy without osteosynthesis in patients with mandibular prognathism by means of three-dimensional computed tomography.Study design. In this pilot study, five patients treated with sagittal split ramus osteotomy and 5 patients treated with intraoral vertical ramus osteotomy were evaluated. A technique to superimpose a postoperative three-dimensional computed tomography image on its corresponding preoperative image was designed. Postoperative condylar displacement, rotation, and tilting were measured in three-dimensional computed tomography images.Results. Within 3 to 6 months after surgery, changes in the inclination of the condylar axes were distinctly seen, although changes in the position of the condyles within the joints were minimal. In particular, outward rotation of the condylar long axes after intraoral vertical ramus osteotomy was a frequent finding.Conclusions. The three-dimensional computed tomography superimposition technique was a practical method of evaluating post-surgical condylar displacement after mandibular osteotomy.     

Cone-beam computed tomography evaluation on the changes in condylar long axis according to asymmetric setback in sagittal split ramus osteotomy patients

Objective:To determine whether the condylar rotation is affected by asymmetric setback in patients undergoing sagittal split ramus osteotomy.Materials and Methods:Thirty patients who underwent bilateral sagittal split ramus osteotomy setback surgery were divided into the two groups, symmetric setback and asymmetric setback, according to the right/left difference of setback amount (<2.0, ≥2.0 mm). Condylar long axis changes were evaluated using the three-dimensional superimposition of before and immediately after surgery cone-beam computed tomography volume images. Evaluations were performed separately in lesser setback and greater setback side in patients undergoing asymmetric setback, whereas both side condyles were evaluated together in patients undergoing symmetric setback. Condylar axis changes on axial view were correlated with setback amount or right/left setback difference using Pearson correlation analysis.Results:In general, the condylar axis change occurred in a pattern of inward rotation. The condyles in patients undergoing symmetric setback showed 3.4° rotation in average. In case of asymmetric setback, the lesser setback side showed larger value (4.3°) than the greater setback side (2.3°) with a statistical significance. In the correlation analysis, setback amount showed no significant correlation with the condylar axis changes in both groups. However, correlation with right/left setback difference showed a positive correlation in lesser setback side of patients undergoing asymmetric setback.Conclusion:The findings of this study indicate that large amount of setback alone does not contribute to the change in condylar long axis, but asymmetric setback might cause a change in condylar long axis, particularly on the lesser setback side.     

A new osteotomy for the correction of mandibular prognathism: techniques and rationale of the intraoral vertico-sagittal ramus osteotomy.

The sagittal split ramus osteotomy (SSRO) and the intraoral vertical ramus osteotomy (IVRO) are long established methods for correcting mandibular prognathism, each having its own advantages. However, both procedures have the same disadvantage: the potential for postoperative condylar displacement. The displacement of the condyle is mainly due to the fact that the osteotomy plane is not parallel to the original sagittal plane in which the mandible is repositioned. The author has developed a new ramus osteotomy since 1985 in which the osteotomy plane is theoretically parallel to the original sagittal plane and thereby attempting to decrease the incidence of condylar displacement. This osteotomy was designed additionally to decrease neurosensory disturbances and has the advantages of both methods, and therefore has been named 'intraoral vertico-sagittal ramus osteotomy (IVSRO)'. Initial experience with the 24 prognathic patients operated on by means of the IVSRO indicated excellent clinical results. It has been noted clinically that the IVSRO is very effective in reducing postoperative iatrogenic TMJ symptoms and in treating preoperative TMJ symptoms. It has the additional effect of reducing neurosensory disturbances. This osteotomy seems to be more applicable in mandibular prognathism with excessive flaring of the ramus, particularly that associated with TMJ dysfunction, because the IVSRO has a 'condylotomy effect' and its splitting plane diverges less from the original sagittal plane than that of the SSRO and the IVRO.     

Stability of skeletal class III malocclusion after combined maxillary and mandibular procedures: rigid internal fixation versus wire osteosynthesis of the mandible.

PURPOSE: The aim of this study was to evaluate skeletal stability after double-jaw surgery for correction of skeletal Class III malocclusion to assess whether there were any differences between wire and rigid fixation of the mandible. PATIENTS AND METHODS: Thirty-seven Class III patients had Le Fort I osteotomy stabilized with plate and screws for maxillary advancement. Bilateral sagittal split osteotomy for mandibular setback was stabilized with wire osteosynthesis and maxillomandibular fixation for 6 weeks in 20 patients (group 1) and with rigid internal fixation in 17 patients (group 2). Lateral cephalograms were taken before surgery, immediately after surgery, 8 weeks after surgery, and 1 year after surgery. RESULTS: Before surgery, both groups were balanced with respect to linear and angular measurements of craniofacial morphology. One year after surgery, maxillary sagittal stability was excellent in both groups, and bilateral sagittal split osteotomy accounted for most of the total horizontal relapse observed. In group 1, significant correlations were found between maxillary advancement and relapse at the posterior maxilla and between mandibular setback and postoperative counterclockwise rotation of the ramus and mandibular relapse. In group 2, significant correlations were found between mandibular setback and intraoperative clockwise rotation of the ramus and between mandibular setback and postoperative counterclockwise rotation of the ramus and mandibular relapse. No significant differences in postoperative skeletal and dental stability between groups were observed except for maxillary posterior vertical position. CONCLUSIONS: Surgical correction of Class III malocclusion after combined maxillary and mandibular procedures appears to be a fairly stable procedure independent of the type of fixation used to stabilize the mandible.     

Evaluation of condylar surface CT values related to condylar height reduction after orthognathic surgery

This study was performed to evaluate the relationship between condylar height reduction and changes in condylar surface computed tomography (CT) values in jaw deformity patients following orthognathic surgery.Mandibular advancement by sagittal split ramus osteotomy (SSRO) with Le Fort I osteotomy was performed in class II patients, and mandibular setback by SSRO with Le Fort I osteotomy was performed in class III patients. The maximum CT values (pixel values) at five points on the condylar surface and the condylar height, ramus height, condylar square, ramus angle, and gonial angle in the sagittal plane were measured preoperatively and 1 year postoperatively. Disc position was classified as anterior disc displacement (ADD) or other types by using magnetic resonance imaging (MRI).Ninety-two condyles of 46 female patients were prepared for this study. Their temporomandibular joints (TMJs) were divided into two groups based on class (46 joints in class II and 46 joints in class III) and two groups based on the findings (25 joints with ADD and 67 joints with other findings). ADD with and without reduction was observed in two joints in the class III group and in 23 joints in the class II group. The distribution of ADD incidence had not changed 1 year after surgery. Condylar height decreased 1 year after surgery in both class II patients (mandibular advancement) (p < 0.0001) and class III patients (mandibular setback) (p = 0.0306). Similarly, condylar height decreased 1 year after surgery both in patients who showed ADD (p = 0.0087) and those with other types (p = 0.0023). Significant postoperative increases at all angle sites on the condylar surface were found in the class II (p < 0.05) and ADD (p < 0.05) groups.This study showed that an enhanced condylar surface CT value might be one sign of condylar height reduction related to sequential condylar resorption, in combination with ADD.     

The treatment of hemimandibular hyperplasia preserving enlarged condylar head.

OBJECTIVE: To present a case of hemimandibular hyperplasia (HH) treated with orthognathic surgery that preserves the condyle without disturbing mandibular function. METHODS: A 27-year-old woman with HH was treated with orthognathic surgery preserving the enlarged condylar head. Radiographic examination showed typical enlargement of the right condyle, elongation of the right ascending ramus and mandibular body, and tilted occlusal plane. A mandibular sagittal split osteotomy on the unaffected side and subcondylar ramus osteotomy on the affected side, Le Fort I wedge osteotomy to relevel the tilted occlusal plane, and contouring of the lower mandibular margin were performed. RESULTS: Excellent results in the full-face appearance and occlusion were obtained. There was no change in the size of the reserved condylar head 4 years postoperatively. In a series of examinations of jaw function with electromyography, mandibular kinesiography, and computer-aided diagnostic axiography, more favorable findings were obtained postoperatively. CONCLUSIONS: In a case of HH without abnormally high growth activity, orthognathic surgery preserving hypertrophic condyle produced functional improvement in addition to good occlusal and aesthetic outcomes.     

3D vector analysis of mandibular condyle stability in mandibular setback surgery with bicortical bioabsorbable screw fixation

IntroductionBioabsorbable screws became widely used for stable fixation in orthognathic surgery as biomechanical technology advanced. Recently, 3D image analyses begin to be used to evaluate surgical changes. The purpose of this study was to evaluate, using 3D vector analysis, the stability of bicortical bioabsorbable screw fixation in mandibular setback using a sagittal split ramus osteotomy.Spatial change of the mandibular condyle was determined by 3D coordinates containing directional information.Materials and methodsBicortical screw fixation was performed using either a bioabsorbable screw (25 patients) or a titanium screw (5 patients) in orthognathic surgery. Pre- and post-operative CT images (6 months after surgery) were superimposed digitally. A 3D coordinate (X, Y, Z) and vectors were employed to quantify spatial changes of the condyle and analysed statistically.ResultsMeasuring on 3D image showed stable error about 0.16 mm. There were no significant differences in the total spatial changes of the condyle between titanium and bioabsorbable screws with the exception of the lateral–medial direction of the condylar centre (P = 0.042). The directional vector components were stable, regardless of mandibular setback.ConclusionIn 3D vector analysis, bioabsorbable screw fixation in SSRO with distal segment osteotomy shows clinically acceptable postoperative condylar position stability.     

双侧下颌支矢状劈开截骨术后咽腔气道的变化

目的：通过头影测量分析骨性下颌前突患者双侧下颌支矢状劈开截骨术后咽腔气道的变化,为术后保持与防止复发提供依据。方法骨性下颌前突患者20例,均接受口内入路的下颌支矢状劈开截骨术。术前1周、术后1周、术后6个月拍摄标准颅颌侧位片进行头影测量,通过治疗前、后对照,比较下颌支矢状劈开截骨术后咽腔气道的改变。采用SPSS 17.0 软件包对数据进行统计学分析。结果术后1周与术前1周相比,软腭长度显著增加,咽腔气道显著减小;术后6个月咽腔气道有所恢复,与术后1周相比软腭长度显著减小,咽腔气道显著增加;术后6个月与术前1周相比,软腭长度及咽腔气道变化无显著差异。结论骨性下颌前突患者行双侧下颌支矢状劈开截骨术后短期内咽腔气道较术前显著减小,可能加大发生睡眠呼吸暂停综合征的几率。但经过一段时间的组织适应和改建后,咽腔气道有恢复至术前宽度的趋势。     

Skeletal stability and condylar position related to fixation method following mandibular setback with bilateral sagittal split ramus osteotomy

PurposeTo investigate postoperative intersegmental displacement and relapse following bilateral sagittal split ramus osteotomy (BSSRO) by comparing three different fixation methods: group A (sliding plate), group B (miniplate) and group C (bicortical screws).Materials and methodsThe present retrospective study included 55 patients with mandibular prognathism who were treated with BSSRO. To evaluate skeletal changes, cone-beam computed tomography was taken before surgery (T0), three days after surgery (T1), and 6 months after surgery (T2). Differences among the three groups were assessed using a one-way analysis of variance, where P < 0.05 was accepted as statistically significant.ResultsThere were no significant differences among the three groups in demographic data and the amount of mandibular setback. In skeletal changes and condylar axis changes, there were no statistically significant differences among the three groups. However, there were statistically significant postoperative skeletal changes in group C (bicortical screws) at all landmarks. The mean horizontal relapse rate was 1.9% in group A (sliding plate); 4.8% in group B (miniplate); and 15.4% in group C (bicortical screws).ConclusionThe sliding plate system has good adaptability to the proximal segment after mandibular setback with BSSRO, and behaves according to semi-rigid fixation principles.     

Management of malunited mandibular condylar fractures

The non-surgical treatment of mandibular condylar fractures, may occasionally result in articular imbalance and temporomandibular joint dysfunction. This may be attributed to condylar head displacement and resorption, resulting in a shortened vertical ramus and lost posterior vertical facial height. Restoring the vertical ramus height is essential in the treatment of such dysfunction, and may be accomplished by unilateral, or bilateral ramus osteotomies. Four examples of patients treated with mandibular ramus osteotomies to restore vertical ramus height, with subsequent improvement in occlusal balance and function are presented. The use of the sagittal split mandibular osteotomy and the external vertical ramus osteotomy, stabilized with small osseous plates, and monocortical screws, is discussed.     

Treatment of painful temporomandibular joint dysfunction with the sagittal split ramus osteotomy.

PURPOSE: We describe a new indication for the sagittal split ramus osteotomy with rigid fixation to treat patients with painful dysfunction of the temporomandibular joint. PATIENTS AND METHODS: Ten patients for whom nonsurgical management failed were found to have a mandibular condyle positioned postero-superior within the glenoid fossa with reduced joint space on corrected-axis tomograms. The sagittal split ramus osteotomy was used to reposition the proximal segment and to increase joint space. Preoperative and long-term postoperative (average, 44.7 months) symptoms and tomographic findings were retrospectively compared. RESULTS: Significant pain relief occurred postoperatively in all patients. One patient had a relapse after initial improvement. No patient developed a malocclusion. The long-term radiographic condyle-fossa relationship tended to return to its preoperative position with no relapse of clinical symptoms, except in the 1 patient. CONCLUSION: The sagittal split ramus osteotomy with rigid fixation is another procedure that can be used to treat painful temporomandibular joint dysfunction by changing the position of the mandibular condyle in the glenoid fossa.     

正颌外科术后髁状突移位的三维CT研究

目的 探讨正颌手术后髁状突在三维方向上位置变化的规律。方法 应用3-DCT观查了正颌手术矫正的患者10例。结果 CT片上横断面双侧髁突角的变化统计学分析有显著性差异,而冠状面值变化无差异。多元逐步回归检验结果只有横断面左侧髁状突的角度变化可构成方程,入方程的变量为左右移动幅度。结论 在冠状面上髁状突内外无明显移位,而横断面上髁状突长轴发生了旋转。髁状突移位与左右移动幅度显著相关,与原下颌骨形态、下颌骨前后及上下移动幅度无关。     

Evaluation of treatment with unilateral mandibular sagittal split ramus osteotomy and maxillary osteotomy in patients with condylar osteochondroma and mandibular asymmetry: A retrospective case series

The aim of the study was to describe an approach where condylar resection with condylar neck preservation was combined with Le Fort I osteotomy and unilateral mandibular sagittal split ramus osteotomy (SSRO).Patients with a unilateral condylar osteochondroma combined with dentofacial deformity and facial asymmetry who underwent surgery between January 2020 and December 2020 were enrolled. The operation included condylar resection, Le Fort I osteotomy and contralateral mandibular sagittal split ramus osteotomy (SSRO). Simplant Pro 11.04 software was used to reconstruct and measure the preoperative and postoperative craniomaxillofacial CT images. The deviation and rotation of the mandible, change in the occlusal plane, position of the “new condyle” and facial symmetry were compared and evaluated during follow-up. Three patients were included in the present study. The patients were followed up for 9.6 months on average (range, 8–12). Immediate postoperative CT images showed that the mandible deviation and rotation and occlusion plane canting decreased significantly postoperatively; facial symmetry was improved but still compromised. During the follow-up, the mandible gradually rotated to the affected side, the position of the “new condyle” moved further inside toward the fossa, and both the mandible rotation and facial symmetry were more significantly improved.Within the limitations of the study it seems that for some patients a combination of condylectomy with condylar neck preservation and unilateral mandibular SSRO can be effective in achieving facial symmetry.     

The Anatomical Basis for Plate Fixation in BSSO to Minimize Condylar Torquing: A Comparative CT Study of Mandibular Advancement and Setback

IntroductionCondylar displacement after bilateral sagittal-split osteotomy (BSSO) occur in the sagittal plane as clockwise/counter-clockwise rotation of the ramus, in the coronal plane as medial/lateral inclination, or in the axial plane as medial/lateral condylar torquing. The purpose of this prospective CT study was to evaluate the role of plate fixation in minimizing condylar torquing or rotational changes in the axial plane.Materials and MethodsThis prospective study was carried out on 26 patients, 13 of whom underwent advancement BSSO and 13 setback BSSO, without maxillary LeFort I osteotomies. All mandibular movements were symmetrical. Fixation of the osteotomized segments was achieved with a single 4-hole plate and monocortical screws. In case of mandibular setbacks, a straight plate was used, whereas an inset-bent plate was used for advancements. Computed tomography scans were obtained preoperatively and postoperatively to measure condylar rotation or torqueing in the axial plane. An increase in condylar angle on axial slices was considered as lateral condylar torquing, whereas a decrease was considered as medial condylar torquingResultsA mean medial condylar torquing of 0.2° was noted postoperatively in case of setbacks (p > 0.05 not significant). This suggested minimal condylar torquing, indicating that the proximal and distal segments maintained contact at the anterior vertical osteotomy fixed with a straight plate. In case of advancements, a mean lateral condylar torquing of 2.2° was noted postoperatively (p < 0.005, highly significant). This suggested that the proximal segment flare at the anterior vertical osteotomy site was maintained by inset-bent plate fixation.ConclusionThe gaps between the proximal and distal segments created by mandibular advancement and setback should be maintained. An attempt to close these gaps, especially in mandibular advancement, will result in an unfavourable axial condylar torque. Consequently, the areas of bony contact between the proximal and distal osteotomy sites created by mandibular advancement and setback should be maintained as well.     

Effect of mandibular setback via bilateral sagittal split ramus osteotomy on transverse displacement of the proximal segment.

PURPOSE: The purpose of this study was to evaluate if a correlation exists between: a) transverse changes in the proximal segments because of mandibular setback surgery and b) postsurgical horizontal relapse of the mandible. PATIENTS AND METHODS: A total of 42 patients underwent bilateral sagittal split ramus osteotomy setback with rigid fixation and Le Fort I osteotomy performed by 1 surgeon between 1986 and 2000. The radiographic material for this study consisted of posteroanterior and lateral cephalometric radiographs for each patient taken preoperatively (T1), early postoperatively (T2), and late postoperatively (T3). Twenty-four of the 42 identified patients had T1, T2, and T3 radiographs, while the remainder of the patients had only T1 and T2 radiographs available. The posteroanterior radiographs were used to evaluate the angulation of the proximal segment and the intergonial width. RESULTS: Statistically significant increases in intergonial width and proximal segment angulation occurred from T1 to T2. In fact, all 42 patients had an increased intergonial width from T1 and T2. From T2 to T3, most patients underwent some relapse in their transverse dimension changes (21 of 24 patients had a decrease in their intergonial width). Overall, the intergonial width and the proximal segment angulations were significantly increased from T1 to T3. However, there was no significant correlation between the amount of transverse displacement of the proximal segment and horizontal postsurgical relapse of the mandible. CONCLUSION: The results show that statistically significant changes in the transverse width and angulation between proximal segments occur in patients undergoing bilateral sagittal split ramus osteotomy for mandibular setback with rigid fixation. However, the magnitude of the changes was small, and it is still uncertain as to whether these changes are of any clinical significance.