Liquid and semisolid SLN dispersions for topical application: rheological characterization.

Aqueous dispersions of solid lipid nanoparticles (SLN) are promising drug carrier systems for topical application. A drawback, however, is the need of incorporating the SLN dispersion in commonly used dermal carriers (creams, gels) to obtain the required semisolid consistency for dermal application. This study describes the production of SLN dispersions having the desired semisolid consistency by a one-step process. Physical characterization of these systems in terms of particle size and rheological properties revealed some interesting features. Despite the high lipid content it was possible to produce colloidal dispersions by high pressure homogenization. Continuous flow measurements revealed systems with yield point, plastic flow and thixotropy. Oscillation measurements proved the viscoelastic microstructure of the SLN dispersions. Higher concentrated SLN dispersions were found to have a prevailing elastic component in contrast to lower concentrated systems. Viscoelastic properties of a 40% SLN dispersion were found to be comparable to standard dermal preparations. Storage stability at room temperature in terms of particle size could be demonstrated over a 6-month period. The development of the gel structure of semisolid SLN dispersions is delayed comparable to commercial O/W creams with non-ionic emulsifiers. Parameters like concentration of the dispersed phase, particle size and particle shape were identified as significant factors influencing the microstructure of these complex semisolid systems.     

Preparation of semisolid drug carriers for topical application based on solid lipid nanoparticles

Aqueous dispersions of solid lipid nanoparticles (SLN) show some interesting features in topical drug delivery. However, to get a semisolid carrier having the appropriate consistency for topical application, the liquid SLN dispersions have to be incorporated in convenient topical dosage forms like hydrogels or creams. This is a time-consuming production process with several disadvantages. A new one-step production process delivering a semisolid topical formulation including SLN is presented avoiding these disadvantages. The semisolid SLN dispersions were produced by high-pressure homogenization using an APV Lab 40 homogenizer. The resulting dispersions were characterized concerning their particle size and rheological properties. Despite the high lipid content of the SLN dispersions, they retained their colloidal particle size. Viscoelastic measurements proved the existence of a gel-like structure with a prevailing elastic component.     

Evaluation of the physical stability of SLN and NLC before and after incorporation into hydrogel formulations.

Aqueous dispersions of lipid nanoparticles are being investigated as drug delivery systems for different therapeutic purposes. One of their interesting features is the possibility of topical use, for which these systems have to be incorporated into commonly used dermal carriers, such as creams or hydrogels, in order to have a proper semisolid consistency. For the present investigation four different gel-forming agents (xanthan gum, hydroxyethylcellulose 4000, Carbopol943 and chitosan) were selected for hydrogel preparation. Aqueous dispersions of lipid nanoparticles--solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC)--made from tripalmitin were prepared by hot high pressure homogenization and then incorporated into the freshly prepared hydrogels. NLC differ from SLN due to the presence of a liquid lipid (Miglyol812) in the lipid matrix. Lipid nanoparticles were physically characterized before and after their incorporation into hydrogels. By means of rheological investigations it could be demonstrated that physical properties of the dispersed lipid phase have a great impact on the rheological properties of the prepared semisolid formulations. By employing an oscillation frequency sweep test, significant differences in elastic response of SLN and NLC aqueous dispersions could be observed.     

Solid Lipid Nanoparticles (SLN) and Oil-Loaded SLN Studied by Spectrofluorometry and Raman Spectroscopy

Purpose Recently, colloidal dispersions made of mixtures from solid and liquid lipids have been described to overcome the poor drug loading capacity of solid lipid nanoparticles (SLN). It has been proposed that these nanostructured lipid carriers (NLC) are composed of oily droplets, which are embedded in a solid lipid matrix. High loading capacities and controlled release characteristics have been claimed. It is the objective of the present paper to investigate these new NLC particles in more detail to obtain insights into their structure. Methods Colloidal lipid dispersions were produced by high-pressure homogenization. Particle sizes were estimated by laser diffraction and photon correlation spectroscopy. The hydrophobic fluorescent marker nile red (NR) was used as model drug, and by fluorometric spectroscopy, the molecular environment (polarity) was elucidated because of solvatochromism of NR. The packaging of the lipid nanoparticles was investigated by Raman spectroscopy and by densimetry. The light propagation in lipid nanodispersions was examined by refractometry to obtain further insights into the nanostructural compositions of the carriers. Results Fluorometric spectroscopy clearly demonstrates that NLC nanoparticles offer two nanocompartments of different polarity to accommodate NR. Nevertheless, in both compartments, NR experiences less protection from the outer water phase than in a nanoemulsion. In conventional SLN, lipid crystallization leads to the expulsion of the lipophilic NR from the solid lipid. Measurements performed by densimetry and Raman spectroscopy confirm the idea of intact glyceryl behenate lattices in spite of oil loading. The lipid crystals are not disturbed in their structure as it could be suggested in case of oil incorporation. Refractometric data reveal the idea of light protection because of incorporation of sensitive drug molecules in NLC. Conclusion Neither SLN nor NLC lipid nanoparticles did show any advantage with respect to incorporation rate compared to conventional nanoemulsions. The experimental data let us conclude that NLC lipid nanoparticles are not spherical solid lipid particles with embedded liquid droplets, but they are rather solid platelets with oil present between the solid platelet and the surfactant layer.     

Structural investigations on nanoemulsions, solid lipid nanoparticles and nanostructured lipid carriers by cryo-field emission scanning electron microscopy and Raman spectroscopy

Recently, colloidal dispersions based on solid lipids (solid lipid nanoparticles, SLN) and mixtures of solid and liquid lipids (nanostructured lipid carriers, NLC) were described as innovative carrier systems. A spherical particle shape is the basis of features such as a high loading capacity and controlled drug release characteristics due to smaller lipid-water interfaces and longer diffusion pathways when compared to thin platelets. The structures of SLN and the influence of oil load (NLC) on particle properties were investigated by photon correlation spectroscopy (PCS), laser diffractometry (LD), cryo-field emission scanning electron microscopy (cryo-FESEM), Raman spectroscopy and infrared spectroscopy (IR), and compared to a conventional nanoemulsion. PCS and LD data show similar size and size distribution for SLN and NLC (approximately 210 nm, polydispersity index approximately 0.15) and suggested a long term physical stability for the dispersions which had been stored for up to 12 months at different temperatures. Using cryo-FESEM droplets (for the nanoemulsion) and almost spherical particles for SLN and NLC were observed. Raman spectroscopy resulted in spectra for NLC that are weighted to the SLN spectra, suggesting an undisturbed crystal structure. Infrared spectra of the NLC are predominantly SLN in nature. Importantly the SLN bands are unshifted in the NLC spectrum indicating that the crystalline structure is unaffected by the presence of the oil.     

Preparation and characterization of n-dodecyl-ferulate-loaded solid lipid nanoparticles (SLN)

Solid lipid nanoparticles (SLN) containing a novel potential sunscreen n-dodecyl-ferulate (ester of ferulic acid) were developed. The preparation and stability parameters of n-dodecyl-ferulate-loaded SLN have been investigated concerning particle size, surface electrical charge (zeta potential) and matrix crystallinity. The chemical stability of n-dodecyl-ferulate at high temperatures was also assessed by thermal gravimetry analysis. For the selection of the appropriated lipid matrix, chemically different lipids were melted with 4% (m/m) of active and lipid nanoparticles were prepared by the so-called high pressure homogenization technique. n-Dodecyl-ferulate-loaded SLN prepared with cetyl palmitate showed the lowest mean particle size and polydispersity index, as well as the highest physical stability during storage time of 21 days at 4, 20 and 40 degrees C. These colloidal dispersions containing the sunscreen also exhibited the common melting behaviour of aqueous SLN dispersions.     

Characterisation of nanoparticulate systems by hydrodynamic chromatography

Particle size and particle size distribution can have a fundamental effect on the physical properties of colloidal dispersions. For many systems the measurement of average particle size is not sufficient, the presence of different size populations will have a strong influence on properties and could be related to the production process. Hydrodynamic chromatography (HDC) provides a method for the separation of polymers in solution or particles in suspension based on their size. In a packed column, the separation takes place in the inter-particle channels and the elution order is from large to small, analogous to gel permeation chromatography. The dynamic range of packed column HDC is from molecular size up to particles of greater than 1 microm. New instrumentation which can be used to determine the particle size distribution of a range of colloidal dispersions by packed column HDC is described. Data to support accuracy and precision of average particle size determination is presented as well as a number of case studies to illustrate the applicability of the technique to samples with polydisperse or multi-modal particle size distributions.     

喷雾干燥法固化黄豆苷元固体脂质纳米粒的研究

目的：建立一种干燥的固体脂质纳米粒的制备方法。方法：采用超声分散法制备黄豆苷元固体脂质纳米粒的混悬液,然后采用喷雾干燥法将其制成干燥的、可再分散的固体脂质纳米粒。结果：在混悬液中黄豆苷元固体脂质纳米粒为球形粒子,平均粒径约为280 nm,喷雾干燥后得到的纳米粒仍为球型,分散后的粒径与喷干前相比有所增大,平均粒径约为720 nm,稳定性较好。结论：喷雾干燥法制备黄豆苷元固体脂质纳米粒是可行的。     

Solid lipid nanoparticles (SLN) for controlled drug delivery. II. Drug incorporation and physicochemical characterization

Solid lipid nanoparticles (SLN) are a colloidal carrier system for controlled drug delivery. The lipophilic model drugs tetracaine and etomidate were incorporated to study the maximum drug loading, entrapment efficacy, effect of drug incorporation on SLN size, zeta potential (charge) and long-term physical stability. Drug loads of up to 10% could be achieved whilst simultaneously maintaining a physically stable nanoparticle dispersion. Incorporation of drugs showed no or little effect on particle size and zeta potential compared to drug-free SLN. The optimized production parameters previously established for drug-free SLN dispersions can therefore be transferred to drug-loaded systems to facilitate product development.     

Solid lipid nanoparticles (SLN) for controlled drug delivery II. drug incorporation and physicochemical characterization

Solid lipid nanoparticles (SLN) are a colloidal carrier system for controlled drug delivery. The lipophilic model drugs tetracaine and etomidate were incorporated to study the maximum drug loading, entrapment efficacy, effect of drug incorporation on SLN size, zeta potential (charge) and long-term physical stability. Drug loads of up to 10% could be achieved whilst simultaneously maintaining a physically stable nanoparticle dispersion. Incorporation of drugs showed no or little effect on particle size and zeta potential compared to drug-free SLN. The optimized production parameters previously established for drug-free SLN dispersions can therefore be transferred to drug-loaded systems to facilitate product development.     

Lipid nanoparticles as carrier for octyl-methoxycinnamate: in vitro percutaneous absorption and photostability studies

The aim of the present study was the evaluation of lipid nanoparticles (solid lipid nanoparticles, SLN, and nanostructured lipid carriers, NLC) as potential carriers for octyl-methoxycinnamate (OMC). The release pattern of OMC from SLN and NLC was evaluated in vitro, determining its percutaneous absorption through excised human skin. Additional in vitro studies were performed in order to evaluate, after UVA radiation treatment, the spectral stability of OMC-loaded lipid nanoparticles. From the obtained results, ultrasonication method yielded both SLN and NLC in the nanometer range with a high active loading and a particle shape close to spherical. Differential scanning calorimetry data pointed out the key role of the inner oil phase of NLC in stabilizing the particle architecture and in increasing the solubility of OMC as compared with SLN. In vitro results showed that OMC, when incorporated in viscosized NLC dispersions (OMC-NLC), exhibited a lower flux with respect to viscosized SLN dispersions (OMC-SLN) and two reference formulations: a microemulsion (OMC-ME) and a hydroalcoholic gel (OMC-GEL). Photostability studies revealed that viscosized NLC dispersions were the most efficient at preserving OMC from ultraviolet-mediated photodegradation.     

Key production parameters for the development of solid lipid nanoparticles by high shear homogenization

In this work, we report the development and optimization of solid lipid nanoparticles (SLN) production by a simple, fast, and cost-effective high shear homogenization process. A screening of several solid lipids (Compritol 888 ATO, Precirol ATO 5, Cetyl Palmitate, Dynasan 118, Imwitor 900K, Stearic acid) has been carried out in combination with Poloxamer 188 as the selected surfactant, based on the mean particle size and polydispersity index. The improvement of the physical stability of the SLN dispersions was achieved by the use of a cationic lipid (cetyl trimethylammonium bromide) reaching zeta potential values above +60 mV. Combining the optimized speed and time of shear, monodispersed SLN (PdI < 0.25) under the nanometer range could be produced.     

Study of solid lipid nanoparticles with respect to particle size distribution and drug loading

This work deals with the formulation and development of Solid Lipid Nanoparticles (SLN) using pressure homogenization technique, nimesulide being used as the model drug. Main emphasis of the work was to study the effect of individual process parameters (homogenization pressure and homogenization cycles) and formulation parameters (lipid concentration and surfactant concentration) on particle size distribution and drug loading. Particle size distribution data indicate that by optimizing the homogenization process and formulation parameters it is possible to produce SLN within a desired size range as required for carrier mediated drug targeting. Approaches to improve drug loading efficiency indicate that drug loading was higher in case of SLN prepared from glyceryl beheanate, palmitostearate and glyceryl tristearate + span 60 as compared to monoacid triglyceride (MAT) tristearate. Thermal analysis by differential scanning calorimetry of the drug loaded SLN indicates the solid nature of the lipid carrier as required for sustained drug release.     

Characterization of lipid nanoparticles by differential scanning calorimetry, X-ray and neutron scattering

Differential scanning calorimetry and X-ray diffraction play a prominent role in the characterization of lipid nanoparticle (LNP) dispersions. This review shortly outlines the measurement principles of these two techniques and summarizes their applications in the field of nanodispersions of solid lipids. These methods are particularly useful for the characterization of the matrix state, polymorphism and phase behavior of the nanoparticles which may be affected by, for example, the small particle size and the composition of the dispersions. The basics of small angle X-ray and neutron scattering which are also very promising methods for the characterization of LNPs are explained in some more detail. Examples for their use in the area of solid LNPs regarding the evaluation of particle size effects and the formation of superstructures in the nanoparticle dispersions are given. Some technical questions concerning the use of the different characterization techniques in the field of LNP research are also addressed.     

Solid lipid nanoparticles and nanostructured lipid carriers--innovative generations of solid lipid carriers

The first generation of solid lipid carrier systems in nanometer range, Solid Lipid Nanoparticles (SLN), was introduced as an alternative to liposomes. SLN are aqueous colloidal dispersions, the matrix of which comprises of solid biodegradable lipids. SLN are manufactured by techniques like high pressure homogenization, solvent diffusion method etc. They exhibit major advantages such as modulated release, improved bioavailability, protection of chemically labile molecules like retinol, peptides from degradation, cost effective excipients, improved drug incorporation and wide application spectrum. However there are certain limitations associated with SLN, like limited drug loading capacity and drug expulsion during storage, which can be minimized by the next generation of solid lipids, Nanostructured lipid carriers (NLC). NLC are lipid particles with a controlled nanostructure that improves drug loading and firmly incorporates the drug during storage. Owing to their properties and advantages, SLN and NLC may find extensive application in topical drug delivery, oral and parenteral administration of cosmetic and pharmaceutical actives. Cosmeceuticals is emerging as the biggest application target of these carriers. Carrier systems like SLN and NLC were developed with a perspective to meet industrial needs like scale up, qualification and validation, simple technology, low cost etc. This paper reviews present status of SLN and NLC as carrier systems with special emphasis on their application in Cosmeceuticals; it also gives an overview about various manufacturing techniques of SLN and NLC.     

Polymorphic behaviour of Compritol888 ATO as bulk lipid and as SLN and NLC

CompritolR888 ATO (glycerol behenate) is widely used as a pharmaceutical excipient in the field of solid dosage forms due to its lubricating properties. It is an amphiphilic material with a high melting point (approximately 70 degrees C) and, therefore, it can also be used to prepare aqueous colloidal dispersions. The aim of this paper is to study the suitability of CompritolR888 ATO for the production of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for the entrapment of a lipophilic model drug. This study assesses the crystalline structure of the bulk lipid, as well as the changes that occur in its crystal lattice with the addition of 'impurities', such as oil (alpha-tocopherol) and drug (ketoconazole), using DSC and X-ray diffraction analysis before and after thermal stress. Aqueous SLN and NLC dispersions were produced using an appropriate surfactant/co-surfactant system and their physicochemical stability was assessed by PCS, LD, DSC and by WAXS. It was found that the crystalline lattice of CompritolR888 ATO is composed of very small amounts of the unstable alpha polymorphic form characteristic of triacylglycerols, which disappears after thermal stress of bulk lipid. Mixing oils and drug molecules which are soluble in this lipid decreased its lattice organization and, thus, was revealed to be suitable for production of lipid nanoparticles containing ketoconazole. However, particle growth could not be avoided during shelf life.     

Preparation of nanoemulsions and solid lipid nanoparticles by premix membrane emulsification

In an attempt to overcome problems of conventional high-energy preparation processes for colloidal drug carrier systems, premix membrane emulsification was investigated for the first time as an alternative low-energy input process for the preparation of pharmaceutical nanoemulsions and solid lipid nanoparticles. The effect of process parameters on dispersions based on nonpolar lipids (medium-chain triglycerides, soybean oil, and trimyristin) and different emulsifiers (sodium dodecyl sulfate, poloxamer 188, polyglyceryl-10-laurate, and sucrose laurate) was studied in a small-volume device and a larger scale-up approach. For emulsions and suspensions, mean particle sizes in a range from about 100 to 200 nm were observed for monomodal to monodisperse particle size distributions after 21 cycles of extrusion through polycarbonate membrane filters. As the mass ratio of matrix lipid to emulsifier (4:3, w/w concentrations) usually applied for the preparation of stable colloidal lipid particles was quite high, the amount of emulsifier in the dispersions was minimized. It was observed that the minimal concentration of emulsifier increased with decreasing membrane pore size. The possibility to prepare colloidal drug carrier systems with a high concentration of matrix lipid (up to 20%) by an optimized membrane extrusion process offers new opportunities for the processing of sensitive substances.     

Electrolyte- and pH-stabilities of aqueous solid lipid nanoparticle (SLN) dispersions in artificial gastrointestinal media.

The influence of artificial gastrointestinal (GI) media on the physical stability of solid lipid nanoparticle (SLN) formulations consisting of different lipids and various surfactants/stabilizers has been investigated in vitro, with respect to ionic strength and pH. Laser diffractometry and zeta potential measurements were the techniques applied. Some SLN formulations already showed aggregation/particle growth in the presence of electrolytes at neutral pH. Other lipid nanodispersions remained physically stable with respect to the influence of electrolytes, but were pH-sensitive. It was possible to produce SLN that were GIT (gastrointestinal tract) stable by an optimized stabilizer composition. There is no optimal surfactant mixture for stabilization of any lipid, e.g. SLN consisting of the lipid Cutina CP showed GIT stability in combination with the stabilizer sugar ester S1670, whereas the stabilization with the surfactant mixture Tween 80/Span 85 was not effective. Vice versa, the emulsifier Pluronic F68 stabilized the lipid Compritol ATO 888 but not the lipid Imwitor 900 sufficiently to avoid aggregation of the SLN dispersion in artificial GI media. The stabilizing properties depend obviously on the specific interactions of the lipid matrix with the emulsifier, e.g. anchoring of the stabilizer on the lipid surface and density on the surface.     

Polymorphic behaviour of Compritol®888 ATO as bulk lipid and as SLN and NLC

Compritol®888 ATO (glycerol behenate) is widely used as a pharmaceutical excipient in the field of solid dosage forms due to its lubricating properties. It is an amphiphilic material with a high melting point (～70°C) and, therefore, it can also be used to prepare aqueous colloidal dispersions. The aim of this paper is to study the suitability of Compritol®888 ATO for the production of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for the entrapment of a lipophilic model drug. This study assesses the crystalline structure of the bulk lipid, as well as the changes that occur in its crystal lattice with the addition of ‘impurities’, such as oil (α-tocopherol) and drug (ketoconazole), using DSC and X-ray diffraction analysis before and after thermal stress. Aqueous SLN and NLC dispersions were produced using an appropriate surfactant/co-surfactant system and their physicochemical stability was assessed by PCS, LD, DSC and by WAXS. It was found that the crystalline lattice of Compritol®888 ATO is composed of very small amounts of the unstable α polymorphic form characteristic of triacylglycerols, which disappears after thermal stress of bulk lipid. Mixing oils and drug molecules which are soluble in this lipid decreased its lattice organization and, thus, was revealed to be suitable for production of lipid nanoparticles containing ketoconazole. However, particle growth could not be avoided during shelf life.     

Preparation, characterization and physico-chemical properties of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC): their benefits as colloidal drug carrier systems

Solid lipid nanoparticles (SLN) have attracted increasing attention by various research groups and companies since the early 1990s. Their advantages over existing traditional carriers have been clearly documented. In addition, modified SLN have been described which are nanostructured lipid carriers (NLC) composed of liquid lipid blended with a solid lipid to form a nanostructured solid particle matrix. NLC combine controlled release characteristics with some advantages over SLN. This paper reviews the production techniques, characterization and physical stability of these systems including destabilizing factors and principles of drug loading, then considers aspects and benefits of SLN and NLC as colloidal drug carriers.